diff options
Diffstat (limited to 'testhal/KINETIS/ADC/mcuconf.h')
-rw-r--r-- | testhal/KINETIS/ADC/mcuconf.h | 76 |
1 files changed, 76 insertions, 0 deletions
diff --git a/testhal/KINETIS/ADC/mcuconf.h b/testhal/KINETIS/ADC/mcuconf.h new file mode 100644 index 000000000..4f4859599 --- /dev/null +++ b/testhal/KINETIS/ADC/mcuconf.h @@ -0,0 +1,76 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2014 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/*
+ * STM32F0xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 3...0 Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3 Lowest...Highest.
+ */
+
+#define KL2x_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+
+/* Select the MCU clocking mode below by enabling the appropriate block. */
+
+/* FEI mode */
+#if 0
+#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI
+#define KINETIS_SYSCLK_FREQUENCY 21000000UL
+#endif /* 0 */
+
+/* FEE mode - 24 MHz with external 32.768 kHz crystal */
+#if 0
+#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEE
+#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */
+#define KINETIS_MCG_FLL_DRS 0 /* 732x FLL factor */
+#define KINETIS_MCG_FLL_OUTDIV1 1 /* Divide 48 MHz FLL by 1 => 24 MHz */
+#define KINETIS_MCG_FLL_OUTDIV4 2 /* Divide OUTDIV1 output by 2 => 12 MHz */
+#define KINETIS_SYSCLK_FREQUENCY 23986176UL /* 32.768 kHz*732 (~24 MHz) */
+#define KINETIS_UART0_CLOCK_FREQ (32768 * 732) /* FLL output */
+#define KINETIS_UART0_CLOCK_SRC 1 /* Select FLL clock */
+#define KINETIS_BUSCLK_FREQUENCY (KINETIS_SYSCLK_FREQUENCY / KINETIS_MCG_FLL_OUTDIV4)
+#endif /* 0 */
+
+/* FEE mode - 48 MHz */
+#if 0
+#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEE
+#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */
+#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */
+#define KINETIS_MCG_FLL_OUTDIV1 1 /* Divide 48 MHz FLL by 1 => 48 MHz */
+#define KINETIS_MCG_FLL_OUTDIV4 2 /* Divide OUTDIV1 output by 2 => 24 MHz */
+#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */
+#endif /* 0 */
+
+/*
+ * SERIAL driver system settings.
+ */
+#define KINETIS_SERIAL_USE_UART0 TRUE
+
+/*
+ * ADC driver system settings.
+ */
+#define KINETIS_ADC_USE_ADC0 TRUE
|