1 files changed, 0 insertions, 231 deletions
diff --git a/testhal/AVR/multi/PAL/Makefile-arduino_mini b/testhal/AVR/multi/PAL/Makefile-arduino_mini
deleted file mode 100644
index 9dd318b7d..000000000
--- a/testhal/AVR/multi/PAL/Makefile-arduino_mini
+++ /dev/null
@@ -1,231 +0,0 @@
-
-##############################################################################
-#
-# @file   Makefile.
-#
-# @brief  AVR Make file, it can be use to build, and program an application to
-#         an AVR MCU like atmega328p, atmega2560 and so on.
-#
-# @author Theodore Ateba, tf.ateba@gmail.com
-#
-##############################################################################
-
-##############################################################################
-# Building and programming global options.
-# NOTE: Can be overridden externally.
-#
-
-# Compiler options here.
-ifeq ($(USE_OPT),)
-  USE_OPT = -O2
-endif
-
-# C specific options here (added to USE_OPT).
-ifeq ($(USE_COPT),)
-  USE_COPT =
-endif
-
-# C++ specific options here (added to USE_OPT).
-ifeq ($(USE_CPPOPT),)
-  USE_CPPOPT =
-endif
-
-# Enable this if you want to see the full log while compiling.
-ifeq ($(USE_VERBOSE_COMPILE),)
-  USE_VERBOSE_COMPILE = no
-endif
-
-# If enabled, this option makes the build process faster by not compiling
-# modules not used in the current configuration.
-ifeq ($(USE_SMART_BUILD),)
-  USE_SMART_BUILD = yes
-endif
-
-# If enable, this option arase the counter cycle after device programming.
-ifeq ($(USE_AVRDUDE_ERASE_COUNTER),)
-	USE_AVRDUDE_ERASE_COUNTER = no
-endif
-
-# If enable, this option perform a verification after device programming.
-ifeq ($(USE_AVRDUDE_NO_VERIFY),)
-	USE_AVRDUDE_NO_VERIFY = no
-endif
-
-# If enabled, this option increase the programming verbosity level.
-ifeq ($(USE_VERBOSE_PROGRAMMATION),)
-  USE_VERBOSE_PROGRAMMATION = no
-endif
-
-#
-# Building and programming global options.
-##############################################################################
-
-##############################################################################
-# Project, sources and paths.
-#
-
-# Define project name here.
-PROJECT = ch
-
-# Imported source files and paths
-CHIBIOS = ../../../..
-CONFDIR  := ./cfg-arduino_mini
-BUILDDIR := ./build-arduino_mini
-DEPDIR   := ./.dep-arduino_mini
-
-# HAL-OSAL files (optional).
-include $(CHIBIOS)/os/hal/hal.mk
-include $(CHIBIOS)/os/hal/boards/ARDUINO_MINI/board.mk
-include $(CHIBIOS)/os/hal/ports/AVR/MEGA/ATMEGAxx/platform.mk
-include $(CHIBIOS)/os/hal/osal/rt/osal.mk
-# RTOS files (optional).
-include $(CHIBIOS)/os/rt/rt.mk
-include $(CHIBIOS)/os/common/ports/AVR/compilers/GCC/mk/port.mk
-
-# List C source files here. (C dependencies are automatically generated.)
-CSRC =  $(KERNSRC)                      \
-        $(PORTSRC)                      \
-        $(OSALSRC)                      \
-        $(HALSRC)                       \
-        $(PLATFORMSRC)                  \
-        $(BOARDSRC)                     \
-        $(CHIBIOS)/os/various/evtimer.c \
-        main.c
-
-# List C++ sources file here.
-CPPSRC =
-
-INCDIR =  $(CHIBIOS)/os/license $(PORTINC) $(KERNINC)   \
-          $(HALINC) $(OSALINC) $(PLATFORMINC)           \
-          $(BOARDINC) $(CHIBIOS)/os/various $(CONFDIR)
-
-#
-# Project, sources and paths.
-##############################################################################
-
-##############################################################################
-# Compiler settings.
-#
-
-# Micro-Controller Unit.
-MCU  = atmega328p
-
-# MCU frequency (Hz).
-F_CPU = 16000000
-
-# Output format. (can be srec, ihex, binary)
-FORMAT = ihex
-
-# C and C++ Compiler name.
-TRGT = avr-
-CC   = $(TRGT)gcc
-CPPC = $(TRGT)g++
-
-# Enable loading with g++ only if you need C++ runtime support.
-# NOTE: You can use C++ even without C++ support if you are careful. C++
-#       runtime support makes code size explode.
-LD    = $(TRGT)gcc
-CP    = $(TRGT)objcopy
-AR    = $(TRGT)ar rcs
-OD    = $(TRGT)objdump
-NM    = $(TRGT)nm
-SZ    = $(TRGT)size
-HEX   = $(CP) -O ihex
-BIN   = $(CP) -O binary
-
-# AVR programming tool.
-AVRDUDE = avrdude
-
-# Size of the elf binary file.
-ELFSIZE = $(SZ) --mcu=$(MCU) --format=avr $(BUILDDIR)/$(PROJECT).elf
-
-# MCU specific options here.
-MOPT =
-
-# Define C warning options here.
-CWARN = -Wall -Wstrict-prototypes
-
-# Define C++ warning options here.
-CPPWARN =
-
-#
-# Compiler settings.
-##############################################################################
-
-##############################################################################
-# Start of user section.
-#
-
-# List all user C define here, like -D_DEBUG=1.
-UDEFS =
-
-# Define ASM defines here.
-UADEFS =
-
-# List all user directories here.
-UINCDIR =
-
-# List the user directory to look for the libraries here.
-ULIBDIR =
-
-# List all user libraries here.
-ULIBS =
-
-#
-# End of user defines.
-##############################################################################
-
-##############################################################################
-# Start of programming Options (avrdude).
-#
-
-# TODO: Add the programmer for ATtiny, and for ATXmega.
-# AVR programmer.
-AVRDUDE_PROGRAMMER = arduino
-
-# AVR serial port.
-AVRDUDE_PORT = /dev/ttyUSB0
-
-AVRDUDE_WRITE_FLASH = -D -U flash:w:$(BUILDDIR)/$(PROJECT).hex
-#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(BUILDDIR)/$(PROJECT).eep
-
-# Check if the counter cycle erase must be performed after device programming.
-ifeq ($(USE_AVRDUDE_ERASE_COUNTER),yes)
-	AVRDUDE_ERASE_COUNTER = -y
-endif
-
-# Check if a verification must be performed after device programming.
-ifeq ($(USE_AVRDUDE_NO_VERIFY),no)
-	AVRDUDE_NO_VERIFY = -V
-endif
-
-# Check verbosity level activation.
-ifeq ($(USE_VERBOSE_PROGRAMMATION),yes)
-	AVRDUDE_VERBOSE = -v -v
-endif
-
-# AVR programmer flags.
-AVRDUDE_FLAGS = -p $(MCU)
-AVRDUDE_FLAGS += -P $(AVRDUDE_PORT)
-AVRDUDE_FLAGS += -b 57600
-AVRDUDE_FLAGS += -c $(AVRDUDE_PROGRAMMER)
-AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
-AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
-AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
-
-#
-# End of Programming Options (avrdude).
-##############################################################################
-
-##############################################################################
-# Include file.
-#
-
-RULESPATH = $(CHIBIOS)/os/common/ports/AVR/compilers/GCC
-include $(RULESPATH)/rules.mk
-
-#
-# End of include file.
-##############################################################################
-
-# EOF