diff options
Diffstat (limited to 'testhal/AVR/multi/PAL/Makefile-arduino_mega')
| -rw-r--r-- | testhal/AVR/multi/PAL/Makefile-arduino_mega | 231 |
1 files changed, 231 insertions, 0 deletions
diff --git a/testhal/AVR/multi/PAL/Makefile-arduino_mega b/testhal/AVR/multi/PAL/Makefile-arduino_mega new file mode 100644 index 000000000..0c21b7a94 --- /dev/null +++ b/testhal/AVR/multi/PAL/Makefile-arduino_mega @@ -0,0 +1,231 @@ +
+##############################################################################
+#
+# @file Makefile.
+#
+# @brief AVR Make file, it can be use to build, and program an application to
+# an AVR MCU like atmega328p, atmega2560 and so on.
+#
+# @author Theodore Ateba, tfateba@gmail.com
+#
+##############################################################################
+
+##############################################################################
+# Building and programming global options.
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+ USE_OPT = -O2
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+ USE_COPT =
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+ USE_CPPOPT =
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+ USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+ USE_SMART_BUILD = yes
+endif
+
+# If enable, this option arase the counter cycle after device programming.
+ifeq ($(USE_AVRDUDE_ERASE_COUNTER),)
+ USE_AVRDUDE_ERASE_COUNTER = no
+endif
+
+# If enable, this option perform a verification after device programming.
+ifeq ($(USE_AVRDUDE_NO_VERIFY),)
+ USE_AVRDUDE_NO_VERIFY = no
+endif
+
+# If enabled, this option increase the programming verbosity level.
+ifeq ($(USE_VERBOSE_PROGRAMMATION),)
+ USE_VERBOSE_PROGRAMMATION = no
+endif
+
+#
+# Building and programming global options.
+##############################################################################
+
+##############################################################################
+# Project, sources and paths.
+#
+
+# Define project name here.
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../../..
+CONFDIR := ./cfg-arduino_mega
+BUILDDIR := ./build-arduino_mega
+DEPDIR := ./.dep-arduino_mega
+
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/boards/ARDUINO_MEGA/board.mk
+include $(CHIBIOS)/os/hal/ports/AVR/MEGA/ATMEGAxx/platform.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/common/ports/AVR/compilers/GCC/mk/port.mk
+
+# List C source files here. (C dependencies are automatically generated.)
+CSRC = $(KERNSRC) \
+ $(PORTSRC) \
+ $(OSALSRC) \
+ $(HALSRC) \
+ $(PLATFORMSRC) \
+ $(BOARDSRC) \
+ $(CHIBIOS)/os/various/evtimer.c \
+ main.c
+
+# List C++ sources file here.
+CPPSRC =
+
+INCDIR = $(CHIBIOS)/os/license $(PORTINC) $(KERNINC) \
+ $(HALINC) $(OSALINC) $(PLATFORMINC) \
+ $(BOARDINC) $(CHIBIOS)/os/various $(CONFDIR)
+
+#
+# Project, sources and paths.
+##############################################################################
+
+##############################################################################
+# Compiler settings.
+#
+
+# Micro-Controller Unit.
+MCU = atmega2560
+
+# MCU frequency (Hz).
+F_CPU = 16000000
+
+# Output format. (can be srec, ihex, binary)
+FORMAT = ihex
+
+# C and C++ Compiler name.
+TRGT = avr-
+CC = $(TRGT)gcc
+CPPC = $(TRGT)g++
+
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+# runtime support makes code size explode.
+LD = $(TRGT)gcc
+CP = $(TRGT)objcopy
+AR = $(TRGT)ar rcs
+OD = $(TRGT)objdump
+NM = $(TRGT)nm
+SZ = $(TRGT)size
+HEX = $(CP) -O ihex
+BIN = $(CP) -O binary
+
+# AVR programming tool.
+AVRDUDE = avrdude
+
+# Size of the elf binary file.
+ELFSIZE = $(SZ) --mcu=$(MCU) --format=avr $(BUILDDIR)/$(PROJECT).elf
+
+# MCU specific options here.
+MOPT =
+
+# Define C warning options here.
+CWARN = -Wall -Wstrict-prototypes
+
+# Define C++ warning options here.
+CPPWARN =
+
+#
+# Compiler settings.
+##############################################################################
+
+##############################################################################
+# Start of user section.
+#
+
+# List all user C define here, like -D_DEBUG=1.
+UDEFS =
+
+# Define ASM defines here.
+UADEFS =
+
+# List all user directories here.
+UINCDIR =
+
+# List the user directory to look for the libraries here.
+ULIBDIR =
+
+# List all user libraries here.
+ULIBS =
+
+#
+# End of user defines.
+##############################################################################
+
+##############################################################################
+# Start of programming Options (avrdude).
+#
+
+# TODO: Add the programmer for ATtiny, and for ATXmega.
+# AVR programmer.
+AVRDUDE_PROGRAMMER = wiring
+
+# AVR serial port.
+AVRDUDE_PORT = /dev/ttyUSB0
+
+AVRDUDE_WRITE_FLASH = -D -U flash:w:$(BUILDDIR)/$(PROJECT).hex
+#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(BUILDDIR)/$(PROJECT).eep
+
+# Check if the counter cycle erase must be performed after device programming.
+ifeq ($(USE_AVRDUDE_ERASE_COUNTER),yes)
+ AVRDUDE_ERASE_COUNTER = -y
+endif
+
+# Check if a verification must be performed after device programming.
+ifeq ($(USE_AVRDUDE_NO_VERIFY),no)
+ AVRDUDE_NO_VERIFY = -V
+endif
+
+# Check verbosity level activation.
+ifeq ($(USE_VERBOSE_PROGRAMMATION),yes)
+ AVRDUDE_VERBOSE = -v -v
+endif
+
+# AVR programmer flags.
+AVRDUDE_FLAGS = -p $(MCU)
+AVRDUDE_FLAGS += -P $(AVRDUDE_PORT)
+AVRDUDE_FLAGS += -b 115200
+AVRDUDE_FLAGS += -c $(AVRDUDE_PROGRAMMER)
+AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
+AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
+AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
+
+#
+# End of Programming Options (avrdude).
+##############################################################################
+
+##############################################################################
+# Include file.
+#
+
+RULESPATH = $(CHIBIOS)/os/common/ports/AVR/compilers/GCC
+include $(RULESPATH)/rules.mk
+
+#
+# End of include file.
+##############################################################################
+
+# EOF
|