diff options
Diffstat (limited to 'testhal/AVR/XMEGA/SPI/mcuconf.h')
| -rw-r--r-- | testhal/AVR/XMEGA/SPI/mcuconf.h | 152 |
1 files changed, 152 insertions, 0 deletions
diff --git a/testhal/AVR/XMEGA/SPI/mcuconf.h b/testhal/AVR/XMEGA/SPI/mcuconf.h new file mode 100644 index 000000000..3441f16d3 --- /dev/null +++ b/testhal/AVR/XMEGA/SPI/mcuconf.h @@ -0,0 +1,152 @@ +/* + ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef MCUCONF_H +#define MCUCONF_H + +/* + * AVR drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the driver + * is enabled in halconf.h. + */ + +/* + * ADC driver system settings. + */ +#define AVR_ADC_USE_ADC1 FALSE + +/* + * DAC driver system settings. + */ +#define AVR_DAC_USE_DAC1 TRUE + +/* + * EXT drivers system settings. + */ +#define AVR_EXT_USE_INT0 FALSE +#define AVR_EXT_USE_INT1 FALSE +#define AVR_EXT_USE_INT2 FALSE +#define AVR_EXT_USE_INT3 FALSE +#define AVR_EXT_USE_INT4 FALSE +#define AVR_EXT_USE_INT5 FALSE + +/* + * PCINT driver system settings. + */ +#define AVR_EXT_USE_PCINT0 FALSE +#define AVR_EXT_USE_PCINT1 FALSE +#define AVR_EXT_USE_PCINT2 FALSE +#define AVR_EXT_USE_PCINT3 FALSE +#define AVR_EXT_USE_PCINT4 FALSE +#define AVR_EXT_USE_PCINT5 FALSE +#define AVR_EXT_USE_PCINT6 FALSE +#define AVR_EXT_USE_PCINT7 FALSE +#define AVR_EXT_USE_PCINT8 FALSE +#define AVR_EXT_USE_PCINT9 FALSE +#define AVR_EXT_USE_PCINT10 FALSE + +/* + * CAN driver system settings. + */ + +/* + * MAC driver system settings. + */ + +/* + * PWM driver system settings. + */ +#define AVR_PWM_USE_TIM1 FALSE +#define AVR_PWM_USE_TIM2 FALSE +#define AVR_PWM_USE_TIM3 FALSE +#define AVR_PWM_USE_TIM4 FALSE +#define AVR_PWM_USE_TIM5 FALSE + +/* + * ICU driver system settings. + */ +#define AVR_ICU_USE_TIM1 FALSE +#define AVR_ICU_USE_TIM3 FALSE +#define AVR_ICU_USE_TIM4 FALSE +#define AVR_ICU_USE_TIM5 FALSE + +/* + * GPT driver system settings. + */ +#define AVR_GPT_USE_TIM1 FALSE +#define AVR_GPT_USE_TIM2 FALSE +#define AVR_GPT_USE_TIM3 FALSE +#define AVR_GPT_USE_TIM4 FALSE +#define AVR_GPT_USE_TIM5 FALSE + +/* + * SERIAL driver system settings. + */ +#define AVR_SERIAL_USE_USART1 TRUE /* USARTC0. */ +#define AVR_SERIAL_USE_USART2 FALSE /* USARTC1. */ +#define AVR_SERIAL_USE_USART3 FALSE /* USARTD0. */ +#define AVR_SERIAL_USE_USART4 FALSE /* USARTD1. */ +#define AVR_SERIAL_USE_USART5 FALSE /* USARTE0. */ +//TODO: Define the priority if the datasheet define this parameter. +//#define AVR_UART_USART1_IRQ_PRIORITY 12 +//#define AVR_UART_USART2_IRQ_PRIORITY 12 +//#define AVR_UART_USART3_IRQ_PRIORITY 12 +//#define AVR_UART_USART4_IRQ_PRIORITY 12 +//#define AVR_UART_USART5_IRQ_PRIORITY 12 + +/* + * UART driver system settings. + */ +#define AVR_UART_USE_USART1 FALSE /* USARTC0. */ +#define AVR_UART_USE_USART2 FALSE /* USARTC1. */ +#define AVR_UART_USE_USART3 FALSE /* USARTD0. */ +#define AVR_UART_USE_USART4 FALSE /* USARTD1. */ +#define AVR_UART_USE_USART5 FALSE /* USARTE0. */ +// TODO: Definen the DMA stream like bellow +//#define AVR_UART_USART1_RX_DMA_STREAM AVR_DMA_STREAM_ID(2, 5) +//#define AVR_UART_USART2_RX_DMA_STREAM AVR_DMA_STREAM_ID(2, 5) +//#define AVR_UART_USART3_RX_DMA_STREAM AVR_DMA_STREAM_ID(2, 5) +//#define AVR_UART_USART4_RX_DMA_STREAM AVR_DMA_STREAM_ID(2, 5) +//#define AVR_UART_USART5_RX_DMA_STREAM AVR_DMA_STREAM_ID(2, 5) +//TODO: Define the priority if the datasheet define this parameter. +//#define AVR_UART_USART1_IRQ_PRIORITY 12 +//#define AVR_UART_USART2_IRQ_PRIORITY 12 +//#define AVR_UART_USART3_IRQ_PRIORITY 12 +//#define AVR_UART_USART4_IRQ_PRIORITY 12 +//#define AVR_UART_USART5_IRQ_PRIORITY 12 + + +/* + * I2C driver system settings. + */ +#define AVR_I2C_USE_I2C1 FALSE + +/* + * SPI driver system settings. + */ +#define AVR_SPI_USE_SPI1 TRUE +#define AVR_SPI_USE_SPI2 TRUE +//#define AVR_SPI_USE_16BIT_POLLED_EXCHANGE FALSE + +/* + * USB driver system settings. + */ +#define AVR_USB_USE_USB1 FALSE +#define AVR_USB_USE_NAMED_ADDRESS_SPACES FALSE + +#endif /* MCUCONF_H */ |