1 files changed, 0 insertions, 25 deletions
diff --git a/testhal/AVR/ICU/readme.txt b/testhal/AVR/ICU/readme.txt
deleted file mode 100644
index c9b431083..000000000
--- a/testhal/AVR/ICU/readme.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-*****************************************************************************
-** ChibiOS/RT port for Atmel AVR ATmega1280.                                **
-*****************************************************************************
-
-** TARGET **
-
-The demo runs on an Arduino Mega board.
-
-** The Demo **
-
-This demo uses ICP3 (ICU3 input) which is located on pin PE7 to measure signal
-width and period. The signal is output on pin PD4 using standard PAL calls and
-thread sleep functions. PD4 must be wired to PE7. It outputs three different
-waveforms with aproximately 1s duration using 50%, 25% and 75% respective duty
-cycles. After that it just turns on ICU3 and waits for it to overflow. The values
-read on each of these operations is output to SERIAL1.
-
-** Build Procedure **
-
-The demo was built using the GCC AVR toolchain. It should build with WinAVR too!
-
-** Notes **
-
-This demo runs natively so the Arduino bootloader must be removed and the FUSEs
-reprogrammed. The values used for fuses are LFUSE=0xe7 and HFUSE=0x99.