diff options
Diffstat (limited to 'testhal/ATSAMA5D2/SDMMC/main.c')
| -rw-r--r-- | testhal/ATSAMA5D2/SDMMC/main.c | 178 |
1 files changed, 0 insertions, 178 deletions
diff --git a/testhal/ATSAMA5D2/SDMMC/main.c b/testhal/ATSAMA5D2/SDMMC/main.c deleted file mode 100644 index 9c2a026c4..000000000 --- a/testhal/ATSAMA5D2/SDMMC/main.c +++ /dev/null @@ -1,178 +0,0 @@ -/*
- ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
- */
-#include <string.h>
-#include "ch.h"
-#include "hal.h"
-#include "sama_sdmmc_lld.h"
-#include "chprintf.h"
-
-#if SDMMC_USE_FF_LIB == 1
-#include "fat32test.h"
-#endif
-
-#if SDMMC_USE_RELEDGE_LIB == 1
-#include "reledgetest.h"
-#endif
-
-//----------- DEMO CONFIGURATION ------------------------
-//0 (SLOT0) or 1 (SLOT1)
-#define DEMO_SLOT 0
-//1 for FFLib, 0 for Reliance
-#define DEMO_FAT 1
-//----------------------------------------------------------
-
-#define BLOCK_CNT_MAX 32u
-#define DMADL_CNT_MAX 64u
-#define BLOCK_CNT 3u
-
-
-
-CACHE_ALIGNED uint8_t data_buf[BLOCK_CNT_MAX * 512ul];
-
-CACHE_ALIGNED static uint32_t dma_table[DMADL_CNT_MAX * SDMMC_DMADL_SIZE];
-
-CACHE_ALIGNED uint8_t sdmmcbuffer[ROUND_UP_MULT(SDMMC_BUFFER_SIZE, L1_CACHE_BYTES)];
-
-
-
-BaseSequentialStream * ts;
-
-static const SerialConfig sdcfg = { 115200, 0,UART_MR_PAR_NO };
-
-/*
- * LED blinker thread, times are in milliseconds.
- */
-static THD_WORKING_AREA(waThread1, 512);
-static THD_FUNCTION(Thread1, arg) {
-
- (void) arg;
- chRegSetThreadName("blinker");
-
- while (true) {
- palToggleLine(LINE_LED_BLUE);
- chThdSleepMilliseconds(500);
- }
-}
-
-#if DEMO_SLOT == 0
-static const SamaSDMMCConfig sdmmc_cfg = {
- SDMMC_SLOT0,
- sdmmcbuffer,
- data_buf,
- sizeof(data_buf),
- dma_table,
- DMADL_CNT_MAX
-};
-#else
-static const SamaSDMMCConfig sdmmc_cfg = {
- SDMMC_SLOT1,
- sdmmcbuffer,
- data_buf,
- sizeof(data_buf),
- dma_table,
- DMADL_CNT_MAX
-};
-#endif
-
-/*
- * Application entry point.
- */
-int main(void) {
-
- /*
- * System initializations.
- * - HAL initialization, this also initializes the configured device drivers
- * and performs the board-specific initializations.
- * - Kernel initialization, the main() function becomes a thread and the
- * RTOS is active.
- */
- halInit();
- chSysInit();
-
- /*
- * Activates the serial driver 0 using the driver default configuration.
- */
- sdStart(&SD1, &sdcfg);
-
- /* Redirecting UART0 RX on PD2 and UART0 TX on PD3. */
- palSetGroupMode(PIOD, PAL_PORT_BIT(2) | PAL_PORT_BIT(3), 0U,
- PAL_SAMA_FUNC_PERIPH_A | PAL_MODE_SECURE);
-
- ts = (BaseSequentialStream *) &SD1;
-
- sdmmcInit();
-
- sdmmcStart(&SDMMCD1, &sdmmc_cfg);
-
- if (SDMMCD1.state != MCID_INIT_ERROR) {
-
- chprintf(ts,"starting MMC Demo with slot %d\n\r",SDMMCD1.config->slot_id);
-
- if (sdmmcOpenDevice(&SDMMCD1)) {
-
-#if DEMO_FAT == 1
-#if SDMMC_USE_FF_LIB == 1
- fat32test_demo();
-#endif
-#else
-#if SDMMC_USE_RELEDGE_LIB == 1
- relianceedge_demo();
-#endif
-#endif
-
- if (SDMMCD1.config->slot_id == SDMMC_SLOT1)
- {
- chprintf(ts,"remove card to finish demo\n\r");
- sdmmcCloseDevice(&SDMMCD1);
- }
-
- }
-
-
- } else {
- chprintf(ts,"error,stopping MMC\n\r");
- sdmmcStop(&SDMMCD1);
- }
-
- /*
- * Creates the blinker thread.
- */
- chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
-
- /*
- * Normal main() thread activity, in this demo it does nothing except
- * sleeping in a loop and check the button state.
- */
- while (true) {
- chThdSleepMilliseconds(500);
- }
-}
-
-
-bool sdmmcGetInstance(uint8_t index, SdmmcDriver **sdmmcp)
-{
- (void)index;
-
- *sdmmcp = &SDMMCD1;
-
- //read();
-
- return true;
-}
-
-
-
-
|