diff options
Diffstat (limited to 'testhal/ATSAMA5D2/SDMMC/ffconf.h')
| -rw-r--r-- | testhal/ATSAMA5D2/SDMMC/ffconf.h | 269 |
1 files changed, 0 insertions, 269 deletions
diff --git a/testhal/ATSAMA5D2/SDMMC/ffconf.h b/testhal/ATSAMA5D2/SDMMC/ffconf.h deleted file mode 100644 index 18a902237..000000000 --- a/testhal/ATSAMA5D2/SDMMC/ffconf.h +++ /dev/null @@ -1,269 +0,0 @@ -/* CHIBIOS FIX */ -#include "ch.h" -#include "sama_sdmmc_conf.h" -/*---------------------------------------------------------------------------/ -/ FatFs - FAT file system module configuration file R0.12 (C)ChaN, 2016 -/---------------------------------------------------------------------------*/ - -//#define _FFCONF 88100 /* Revision ID */ -#define FFCONF_DEF 87030 /* Revision ID */ -/*---------------------------------------------------------------------------/ -/ Function Configurations -/---------------------------------------------------------------------------*/ - -#define FF_FS_READONLY 0 -/* This option switches read-only configuration. (0:Read/Write or 1:Read-only) -/ Read-only configuration removes writing API functions, f_write(), f_sync(), -/ f_unlink(), f_mkdir(), f_chmod(), f_rename(), f_truncate(), f_getfree() -/ and optional writing functions as well. */ - - -#define FF_FS_MINIMIZE 0 -/* This option defines minimization level to remove some basic API functions. -/ -/ 0: All basic functions are enabled. -/ 1: f_stat(), f_getfree(), f_unlink(), f_mkdir(), f_truncate() and f_rename() -/ are removed. -/ 2: f_opendir(), f_readdir() and f_closedir() are removed in addition to 1. -/ 3: f_lseek() function is removed in addition to 2. */ - - -#define FF_USE_STRFUNC 0 -/* This option switches string functions, f_gets(), f_putc(), f_puts() and -/ f_printf(). -/ -/ 0: Disable string functions. -/ 1: Enable without LF-CRLF conversion. -/ 2: Enable with LF-CRLF conversion. */ - - -#define FF_USE_FIND 0 -/* This option switches filtered directory read functions, f_findfirst() and -/ f_findnext(). (0:Disable, 1:Enable 2:Enable with matching altname[] too) */ - - -#define FF_USE_MKFS 1 -/* This option switches f_mkfs() function. (0:Disable or 1:Enable) */ - - -#define FF_USE_FASTSEEK 0 -/* This option switches fast seek function. (0:Disable or 1:Enable) */ - - -#define FF_USE_EXPAND 0 -/* This option switches f_expand function. (0:Disable or 1:Enable) */ - - -#define FF_USE_CHMOD 0 -/* This option switches attribute manipulation functions, f_chmod() and f_utime(). -/ (0:Disable or 1:Enable) Also _FS_READONLY needs to be 0 to enable this option. */ - - -#define FF_USE_LABEL 1 -/* This option switches volume label functions, f_getlabel() and f_setlabel(). -/ (0:Disable or 1:Enable) */ - - -#define FF_USE_FORWARD 0 -/* This option switches f_forward() function. (0:Disable or 1:Enable) -/ To enable it, also _FS_TINY need to be 1. */ - - -/*---------------------------------------------------------------------------/ -/ Locale and Namespace Configurations -/---------------------------------------------------------------------------*/ - -#define FF_CODE_PAGE 850 -/* This option specifies the OEM code page to be used on the target system. -/ Incorrect setting of the code page can cause a file open failure. -/ -/ 1 - ASCII (No extended character. Non-LFN cfg. only) -/ 437 - U.S. -/ 720 - Arabic -/ 737 - Greek -/ 771 - KBL -/ 775 - Baltic -/ 850 - Latin 1 -/ 852 - Latin 2 -/ 855 - Cyrillic -/ 857 - Turkish -/ 860 - Portuguese -/ 861 - Icelandic -/ 862 - Hebrew -/ 863 - Canadian French -/ 864 - Arabic -/ 865 - Nordic -/ 866 - Russian -/ 869 - Greek 2 -/ 932 - Japanese (DBCS) -/ 936 - Simplified Chinese (DBCS) -/ 949 - Korean (DBCS) -/ 950 - Traditional Chinese (DBCS) -*/ - - -#define FF_USE_LFN 2 -#define FF_MAX_LFN 255 -/* The _USE_LFN switches the support of long file name (LFN). -/ -/ 0: Disable support of LFN. _MAX_LFN has no effect. -/ 1: Enable LFN with static working buffer on the BSS. Always NOT thread-safe. -/ 2: Enable LFN with dynamic working buffer on the STACK. -/ 3: Enable LFN with dynamic working buffer on the HEAP. -/ -/ To enable the LFN, Unicode handling functions (option/unicode.c) must be added -/ to the project. The working buffer occupies (_MAX_LFN + 1) * 2 bytes and -/ additional 608 bytes at exFAT enabled. _MAX_LFN can be in range from 12 to 255. -/ It should be set 255 to support full featured LFN operations. -/ When use stack for the working buffer, take care on stack overflow. When use heap -/ memory for the working buffer, memory management functions, ff_memalloc() and -/ ff_memfree(), must be added to the project. */ - - -#define FF_LFN_UNICODE 0 -/* This option switches character encoding on the API. (0:ANSI/OEM or 1:Unicode) -/ To use Unicode string for the path name, enable LFN and set _LFN_UNICODE = 1. -/ This option also affects behavior of string I/O functions. */ - - -#define FF_STRF_ENCODE 3 -/* When _LFN_UNICODE == 1, this option selects the character encoding on the file to -/ be read/written via string I/O functions, f_gets(), f_putc(), f_puts and f_printf(). -/ -/ 0: ANSI/OEM -/ 1: UTF-16LE -/ 2: UTF-16BE -/ 3: UTF-8 -/ -/ This option has no effect when _LFN_UNICODE == 0. */ - - -#define FF_FS_RPATH 0 -/* This option configures support of relative path. -/ -/ 0: Disable relative path and remove related functions. -/ 1: Enable relative path. f_chdir() and f_chdrive() are available. -/ 2: f_getcwd() function is available in addition to 1. -*/ - - -/*---------------------------------------------------------------------------/ -/ Drive/Volume Configurations -/---------------------------------------------------------------------------*/ - -#define FF_VOLUMES 2 -/* Number of volumes (logical drives) to be used. */ - - -#define FF_STR_VOLUME_ID 0 -#define FF_VOLUME_STRS "RAM","NAND","CF","SD1","SD2","USB1","USB2","USB3" -/* _STR_VOLUME_ID switches string support of volume ID. -/ When _STR_VOLUME_ID is set to 1, also pre-defined strings can be used as drive -/ number in the path name. _VOLUME_STRS defines the drive ID strings for each -/ logical drives. Number of items must be equal to _VOLUMES. Valid characters for -/ the drive ID strings are: A-Z and 0-9. */ - - -#define FF_MULTI_PARTITION 1 -/* This option switches support of multi-partition on a physical drive. -/ By default (0), each logical drive number is bound to the same physical drive -/ number and only an FAT volume found on the physical drive will be mounted. -/ When multi-partition is enabled (1), each logical drive number can be bound to -/ arbitrary physical drive and partition listed in the VolToPart[]. Also f_fdisk() -/ funciton will be available. */ - - -#define FF_MIN_SS SDMMC_BLOCK_SIZE -#define FF_MAX_SS SDMMC_BLOCK_SIZE -/* These options configure the range of sector size to be supported. (512, 1024, -/ 2048 or 4096) Always set both 512 for most systems, all type of memory cards and -/ harddisk. But a larger value may be required for on-board flash memory and some -/ type of optical media. When _MAX_SS is larger than _MIN_SS, FatFs is configured -/ to variable sector size and GET_SECTOR_SIZE command must be implemented to the -/ disk_ioctl() function. */ - - -#define FF_USE_TRIM 0 -/* This option switches support of ATA-TRIM. (0:Disable or 1:Enable) -/ To enable Trim function, also CTRL_TRIM command should be implemented to the -/ disk_ioctl() function. */ - - -#define FF_FS_NOFSINFO 0 -/* If you need to know correct free space on the FAT32 volume, set bit 0 of this -/ option, and f_getfree() function at first time after volume mount will force -/ a full FAT scan. Bit 1 controls the use of last allocated cluster number. -/ -/ bit0=0: Use free cluster count in the FSINFO if available. -/ bit0=1: Do not trust free cluster count in the FSINFO. -/ bit1=0: Use last allocated cluster number in the FSINFO if available. -/ bit1=1: Do not trust last allocated cluster number in the FSINFO. -*/ - - - -/*---------------------------------------------------------------------------/ -/ System Configurations -/---------------------------------------------------------------------------*/ - -#define FF_FS_TINY 0 -/* This option switches tiny buffer configuration. (0:Normal or 1:Tiny) -/ At the tiny configuration, size of the file object (FIL) is reduced _MAX_SS bytes. -/ Instead of private sector buffer eliminated from the file object, common sector -/ buffer in the file system object (FATFS) is used for the file data transfer. */ - - -#define FF_FS_EXFAT 1 -/* This option switches support of exFAT file system in addition to the traditional -/ FAT file system. (0:Disable or 1:Enable) To enable exFAT, also LFN must be enabled. -/ Note that enabling exFAT discards C89 compatibility. */ - - -#define FF_FS_NORTC 1 -#define FF_NORTC_MON 1 -#define FF_NORTC_MDAY 1 -#define FF_NORTC_YEAR 2018 -/* The option _FS_NORTC switches timestamp functiton. If the system does not have -/ any RTC function or valid timestamp is not needed, set _FS_NORTC = 1 to disable -/ the timestamp function. All objects modified by FatFs will have a fixed timestamp -/ defined by _NORTC_MON, _NORTC_MDAY and _NORTC_YEAR in local time. -/ To enable timestamp function (_FS_NORTC = 0), get_fattime() function need to be -/ added to the project to get current time form real-time clock. _NORTC_MON, -/ _NORTC_MDAY and _NORTC_YEAR have no effect. -/ These options have no effect at read-only configuration (_FS_READONLY = 1). */ - - -#define FF_FS_LOCK 0 -/* The option _FS_LOCK switches file lock function to control duplicated file open -/ and illegal operation to open objects. This option must be 0 when _FS_READONLY -/ is 1. -/ -/ 0: Disable file lock function. To avoid volume corruption, application program -/ should avoid illegal open, remove and rename to the open objects. -/ >0: Enable file lock function. The value defines how many files/sub-directories -/ can be opened simultaneously under file lock control. Note that the file -/ lock control is independent of re-entrancy. */ - - -#define FF_FS_REENTRANT 0 -#define FF_FS_TIMEOUT MS2ST(1000) -#define FF_SYNC_t semaphore_t* -/* The option _FS_REENTRANT switches the re-entrancy (thread safe) of the FatFs -/ module itself. Note that regardless of this option, file access to different -/ volume is always re-entrant and volume control functions, f_mount(), f_mkfs() -/ and f_fdisk() function, are always not re-entrant. Only file/directory access -/ to the same volume is under control of this function. -/ -/ 0: Disable re-entrancy. _FS_TIMEOUT and _SYNC_t have no effect. -/ 1: Enable re-entrancy. Also user provided synchronization handlers, -/ ff_req_grant(), ff_rel_grant(), ff_del_syncobj() and ff_cre_syncobj() -/ function, must be added to the project. Samples are available in -/ option/syscall.c. -/ -/ The _FS_TIMEOUT defines timeout period in unit of time tick. -/ The _SYNC_t defines O/S dependent sync object type. e.g. HANDLE, ID, OS_EVENT*, -/ SemaphoreHandle_t and etc.. A header file for O/S definitions needs to be -/ included somewhere in the scope of ff.c. */ - - -/*--- End of configuration options ---*/ |