1 files changed, 0 insertions, 169 deletions
diff --git a/testex/STM32/STM32L4xx/QSPI-N25Q128/main.c b/testex/STM32/STM32L4xx/QSPI-N25Q128/main.c
deleted file mode 100644
index 93fdeb932..000000000
--- a/testex/STM32/STM32L4xx/QSPI-N25Q128/main.c
+++ /dev/null
@@ -1,169 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#include <string.h>
-
-#include "ch.h"
-#include "hal.h"
-
-#include "m25q.h"
-
-/* 16MB device, 2 cycles delay after NCS.*/
-const QSPIConfig qspicfg1 = {
-  NULL,
-  STM32_DCR_FSIZE(24) | STM32_DCR_CSHT(1)
-};
-
-qspi_command_t cmd_read_id = {
-  QSPI_CFG_CMD(0x9E) | QSPI_CFG_CMD_MODE_ONE_LINE |
-  QSPI_CFG_ADDR_MODE_NONE |
-  QSPI_CFG_ALT_MODE_NONE |
-  QSPI_CFG_DUMMY_CYCLES(0) |
-  QSPI_CFG_DATA_MODE_ONE_LINE,
-  0,
-  0
-};
-
-/*
- * Generic buffer.
- */
-uint8_t buffer[2048];
-
-const uint8_t pattern[128] = {
-  0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
-  16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
-  0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
-  16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
-  0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
-  16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
-  0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
-  16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31
-};
-
-M25QDriver m25q;
-
-const M25QConfig m25qcfg1 = {
-  &QSPID1,
-  &qspicfg1
-};
-
-/*
- * LED blinker thread, times are in milliseconds.
- */
-static THD_WORKING_AREA(waThread1, 128);
-static THD_FUNCTION(Thread1, arg) {
-
-  (void)arg;
-  chRegSetThreadName("blinker");
-  while (true) {
-    palToggleLine(LINE_LED_GREEN);
-    chThdSleepMilliseconds(500);
-    palToggleLine(LINE_LED_GREEN);
-    chThdSleepMilliseconds(500);
-  }
-}
-
-/*
- * Application entry point.
- */
-int main(void) {
-  flash_error_t err;
-  uint8_t *addr;
-
-  /*
-   * System initializations.
-   * - HAL initialization, this also initializes the configured device drivers
-   *   and performs the board-specific initializations.
-   * - Kernel initialization, the main() function becomes a thread and the
-   *   RTOS is active.
-   */
-  halInit();
-  chSysInit();
-
-  /*
-   * LED line as output.
-   */
-  palSetLineMode(LINE_LED_GREEN, PAL_MODE_OUTPUT_PUSHPULL);
-
-  /*
-   * Creates the blinker thread.
-   */
-  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO + 1, Thread1, NULL);
-
-  /*
-   * Initializing and starting M25Q driver.
-   */
-  m25qObjectInit(&m25q);
-  m25qStart(&m25q, &m25qcfg1);
-
-  /* Reading.*/
-  err = flashRead(&m25q, 0, 128, buffer);
-  if (err != FLASH_NO_ERROR)
-    chSysHalt("read error");
-
-  /* Erasing the first sector and waiting for completion.*/
-  (void) flashStartEraseSector(&m25q, 0);
-  err = flashWaitErase((BaseFlash *)&m25q);
-  if (err != FLASH_NO_ERROR)
-    chSysHalt("erase error");
-
-  /* Verifying the erase operation.*/
-  err = flashVerifyErase(&m25q, 0);
-  if (err != FLASH_NO_ERROR)
-    chSysHalt("verify erase error");
-
-  /* Programming a pattern.*/
-  err = flashProgram(&m25q, 0, 128, pattern);
-  if (err != FLASH_NO_ERROR)
-    chSysHalt("program error");
-
-  /* Verifying the erase operation.*/
-  err = flashVerifyErase(&m25q, 0);
-  if (err != FLASH_ERROR_VERIFY)
-    chSysHalt("verify non-erase error");
-
-  /* Memory mapping the device.*/
-  m25qMemoryMap(&m25q, &addr);
-
-  /* Unmapping the device.*/
-  m25qMemoryUnmap(&m25q);
-
-  /* Reading it back.*/
-  memset(buffer, 0, 128);
-  err = flashRead(&m25q, 16, 128, buffer);
-  if (err != FLASH_NO_ERROR)
-    chSysHalt("read error");
-
-  /* Reading it back.*/
-  memset(buffer, 0, 128);
-  err = flashRead(&m25q, 0, 128, buffer);
-  if (err != FLASH_NO_ERROR)
-    chSysHalt("read error");
-
-  /* Erasing again.*/
-  (void) flashStartEraseSector(&m25q, 0);
-  err = flashWaitErase((BaseFlash *)&m25q);
-  if (err != FLASH_NO_ERROR)
-    chSysHalt("erase error");
-
-  /*
-   * Normal main() thread activity, in this demo it does nothing.
-   */
-  while (true) {
-    chThdSleepMilliseconds(500);
-  }
-  return 0;
-}