1 files changed, 0 insertions, 146 deletions
diff --git a/testex/STM32/STM32F3xx/SPI-N25Q128/main.c b/testex/STM32/STM32F3xx/SPI-N25Q128/main.c
deleted file mode 100644
index 7bff72f09..000000000
--- a/testex/STM32/STM32F3xx/SPI-N25Q128/main.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-#include "m25q.h"
-
-/*
- * Maximum speed SPI configuration (18MHz, CPHA=0, CPOL=0, MSb first).
- */
-static const SPIConfig hs_spicfg = {
-  false,
-  NULL,
-  GPIOB,
-  12,
-  0,
-  SPI_CR2_DS_2 | SPI_CR2_DS_1 | SPI_CR2_DS_0
-};
-
-/*
- * Flash driver configuration.
- */
-static const M25QConfig flashcfg = {
-  &SPID2,
-  &hs_spicfg
-};
-
-/*
- * Flash driver object.
- */
-static M25QDriver flash;
-
-/*
- * Generic buffer.
- */
-uint8_t buffer[2048];
-
-const uint8_t pattern[128] = {
-  0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
-  16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
-  0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
-  16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
-  0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
-  16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
-  0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
-  16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31
-};
-
-/*
- * LED blinker thread, times are in milliseconds.
- */
-static THD_WORKING_AREA(waThread1, 128);
-static THD_FUNCTION(Thread1, arg) {
-
-  (void)arg;
-  chRegSetThreadName("blinker");
-  while (true) {
-    palToggleLine(LINE_LED3_RED);
-    chThdSleepMilliseconds(500);
-  }
-}
-
-/*
- * Application entry point.
- */
-int main(void) {
-  flash_error_t err;
-
-  /*
-   * System initializations.
-   * - HAL initialization, this also initializes the configured device drivers
-   *   and performs the board-specific initializations.
-   * - Kernel initialization, the main() function becomes a thread and the
-   *   RTOS is active.
-   */
-  halInit();
-  chSysInit();
-
-  /*
-   * Creates the blinker thread.
-   */
-  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO + 1, Thread1, NULL);
-
-  /*
-   * SPI2 I/O pins setup.
-   */
-  palSetPad(GPIOB, 12);
-  palSetPadMode(GPIOB, 12, PAL_MODE_OUTPUT_PUSHPULL |
-                           PAL_STM32_OSPEED_HIGHEST);       /* New CS.      */
-  palSetPadMode(GPIOB, 13, PAL_MODE_ALTERNATE(5) |
-                           PAL_STM32_OSPEED_HIGHEST);       /* New SCK.     */
-  palSetPadMode(GPIOB, 14, PAL_MODE_ALTERNATE(5) |
-                           PAL_STM32_OSPEED_HIGHEST);       /* New MISO.    */
-  palSetPadMode(GPIOB, 15, PAL_MODE_ALTERNATE(5) |
-                           PAL_STM32_OSPEED_HIGHEST);       /* New MOSI.    */
-
-  /*
-   * Initializing and starting flash driver.
-   */
-  m25qObjectInit(&flash);
-  m25qStart(&flash, &flashcfg);
-
-  /* Programming a pattern.*/
-  err = flashProgram(&flash, 0, 128, pattern);
-  if (err != FLASH_NO_ERROR)
-    chSysHalt("program error");
-
-  /* Reading it back.*/
-  err = flashRead(&flash, 0, 128, buffer);
-  if (err != FLASH_NO_ERROR)
-    chSysHalt("read error");
-
-  /* Erasing the containing sector and waiting for completion.*/
-  (void) flashStartEraseSector(&flash, 0);
-  err = flashWaitErase((BaseFlash *)&flash);
-  if (err != FLASH_NO_ERROR)
-    chSysHalt("erase error");
-
-  /* Verifying the erase operation.*/
-  err = flashVerifyErase(&flash, 0);
-  if (err != FLASH_NO_ERROR)
-    chSysHalt("verify erase error");
-
-  /* Reading back for confirmation.*/
-  err = flashRead(&flash, 0, 128, buffer);
-  if (err != FLASH_NO_ERROR)
-    chSysHalt("read error");
-
-  while (true) {
-    chThdSleepMilliseconds(500);
-  }
-}