1 files changed, 0 insertions, 122 deletions
diff --git a/ports/ARMCM3-STM32F103/stm32_serial.h b/ports/ARMCM3-STM32F103/stm32_serial.h
deleted file mode 100644
index 421cf00fe..000000000
--- a/ports/ARMCM3-STM32F103/stm32_serial.h
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
-    ChibiOS/RT - Copyright (C) 2006-2007 Giovanni Di Sirio.
-
-    This file is part of ChibiOS/RT.
-
-    ChibiOS/RT is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 3 of the License, or
-    (at your option) any later version.
-
-    ChibiOS/RT is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/**
- * @file ports/ARMCM3-STM32F103/stm32_serial.h
- * @brief STM32F103 Serial driver macros and structures.
- * @addtogroup STM32F103_SERIAL
- * @{
- */
-
-#ifndef _STM32_SERIAL_H_
-#define _STM32_SERIAL_H_
-
-/*
- * Tricks required to make the TRUE/FALSE declaration inside the library
- * compatible.
- */
-#ifndef __STM32F10x_H
-#undef FALSE
-#undef TRUE
-#include <stm32f10x.h>
-#define FALSE 0
-#define TRUE (!FALSE)
-#endif
-
-/**
- * @brief Serial buffers size.
- * @details Configuration parameter, you can change the depth of the queue
- * buffers depending on the requirements of your application.
- * @note The default is 128 bytes for both the transmission and receive buffers.
- */
-#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_BUFFERS_SIZE 128
-#endif
-
-/**
- * @brief Default bit rate.
- * @details Configuration parameter, at startup the USARTs are configured at
- * this speed.
- * @note It is possible to use @p SetUSART() in order to change the working
- *       parameters at runtime.
- */
-#if !defined(DEFAULT_USART_BITRATE) || defined(__DOXYGEN__)
-#define DEFAULT_USART_BITRATE 38400
-#endif
-
-/**
- * @brief USART1 driver enable switch.
- * @details If set to @p TRUE the support for USART1 is included.
- * @note The default is @p FALSE.
- */
-#if !defined(USE_STM32_USART1) || defined(__DOXYGEN__)
-#define USE_STM32_USART1 FALSE
-#endif
-
-/**
- * @brief USART2 driver enable switch.
- * @details If set to @p TRUE the support for USART2 is included.
- * @note The default is @p TRUE.
- */
-#if !defined(USE_STM32_USART2) || defined(__DOXYGEN__)
-#define USE_STM32_USART2 TRUE
-#endif
-
-/**
- * @brief USART3 driver enable switch.
- * @details If set to @p TRUE the support for USART3 is included.
- * @note The default is @p FALSE.
- */
-#if !defined(USE_STM32_USART3) || defined(__DOXYGEN__)
-#define USE_STM32_USART3 FALSE
-#endif
-
-/*
- * Extra USARTs definitions here  (missing from the ST header file).
- */
-#define USART_CR2_STOP1_BITS    (0 << 12)   /**< @brief CR2 1 stop bit value.*/
-#define USART_CR2_STOP0P5_BITS  (1 << 12)   /**< @brief CR2 0.5 stop bit value.*/
-#define USART_CR2_STOP2_BITS    (2 << 12)   /**< @brief CR2 2 stop bit value.*/
-#define USART_CR2_STOP1P5_BITS  (3 << 12)   /**< @brief CR2 1.5 stop bit value.*/
-
-/** @cond never*/
-#if USE_STM32_USART1
-extern FullDuplexDriver COM1;
-#endif
-#if USE_STM32_USART2
-extern FullDuplexDriver COM2;
-#endif
-#if USE_STM32_USART3
-extern FullDuplexDriver COM3;
-#endif
-/** @endcond*/
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-  void serial_init(uint32_t prio1, uint32_t prio2, uint32_t prio3);
-  void usart_setup(USART_TypeDef *u, uint32_t speed, uint16_t cr1,
-                   uint16_t cr2, uint16_t cr3);
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* _STM32_SERIAL_H_ */
-
-/** @} */