1 files changed, 0 insertions, 102 deletions
diff --git a/ports/ARM7-LPC214x/lpc214x_serial.h b/ports/ARM7-LPC214x/lpc214x_serial.h
deleted file mode 100644
index 021dbf6a1..000000000
--- a/ports/ARM7-LPC214x/lpc214x_serial.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
-    ChibiOS/RT - Copyright (C) 2006-2007 Giovanni Di Sirio.
-
-    This file is part of ChibiOS/RT.
-
-    ChibiOS/RT is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 3 of the License, or
-    (at your option) any later version.
-
-    ChibiOS/RT is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/**
- * @file ports/ARM7-LPC214x/lpc214x_serial.h
- * @brief LPC214x Serial driver macros and structures.
- * @addtogroup LPC214x_SERIAL
- * @{
- */
-
-#ifndef _LPC214x_SERIAL_H_
-#define _LPC214x_SERIAL_H_
-
-/**
- * @brief Serial buffers size.
- * @details Configuration parameter, you can change the depth of the queue
- * buffers depending on the requirements of your application.
- * @note The default is 128 bytes for both the transmission and receive buffers.
- */
-#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_BUFFERS_SIZE 128
-#endif
-
-/**
- * @brief Default bit rate.
- * @details Configuration parameter, at startup the UARTs are configured at
- * this speed.
- * @note It is possible to use @p SetUART() in order to change the working
- *       parameters at runtime.
- */
-#if !defined(DEFAULT_UART_BITRATE) || defined(__DOXYGEN__)
-#define DEFAULT_UART_BITRATE 38400
-#endif
-
-/**
- * @brief FIFO preload parameter.
- * @details Configuration parameter, this values defines how many bytes are
- * preloaded in the HW transmit FIFO for each interrupt, the maximum value is
- * 16 the minimum is 2, the value 0 disables the feature.
- * @note An high value reduces the number of interrupts generated but can
- *       also increase the worst case interrupt response time because the
- *       preload loops.
- * @note The value zero disables the feature and reverts to a simpler code
- *       that will generate an interrupt for each output byte but is much
- *       smaller and simpler.
- */
-#if !defined(UART_FIFO_PRELOAD) || defined(__DOXYGEN__)
-#define UART_FIFO_PRELOAD 16
-#endif
-
-/**
- * @brief UART0 driver enable switch.
- * @details If set to @p TRUE the support for USART1 is included.
- * @note The default is @p TRUE .
- */
-#if !defined(USE_LPC214x_UART0) || defined(__DOXYGEN__)
-#define USE_LPC214x_UART0 TRUE
-#endif
-
-/**
- * @brief UART1 driver enable switch.
- * @details If set to @p TRUE the support for USART2 is included.
- * @note The default is @p TRUE.
- */
-#if !defined(USE_LPC214x_UART1) || defined(__DOXYGEN__)
-#define USE_LPC214x_UART1 TRUE
-#endif
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-  void serial_init(int vector1, int vector2);
-  void uart_setup(UART *u, int speed, int lcr, int fcr);
-  CH_IRQ_HANDLER(UART0IrqHandler);
-  CH_IRQ_HANDLER(UART1IrqHandler);
-#ifdef __cplusplus
-}
-#endif
-
-/** @cond never*/
-extern FullDuplexDriver COM1, COM2;
-/** @endcond*/
-
-#endif /* _LPC214x_SERIAL_H_*/
-
-/** @} */