1 files changed, 0 insertions, 86 deletions
diff --git a/ports/ARM7-AT91SAM7X/sam7x_serial.h b/ports/ARM7-AT91SAM7X/sam7x_serial.h
deleted file mode 100644
index 1652ab69f..000000000
--- a/ports/ARM7-AT91SAM7X/sam7x_serial.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
-    ChibiOS/RT - Copyright (C) 2006-2007 Giovanni Di Sirio.
-
-    This file is part of ChibiOS/RT.
-
-    ChibiOS/RT is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 3 of the License, or
-    (at your option) any later version.
-
-    ChibiOS/RT is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/**
- * @file ports/ARM7-AT91SAM7X/sam7x_serial.h
- * @brief AT91SAM7X Serial driver macros and structures.
- * @addtogroup AT91SAM7X_SERIAL
- * @{
- */
-
-#ifndef _SAM7X_SERIAL_H_
-#define _SAM7X_SERIAL_H_
-
-/**
- * @brief Serial buffers size.
- * @details Configuration parameter, you can change the depth of the queue
- * buffers depending on the requirements of your application.
- * @note The default is 128 bytes for both the transmission and receive buffers.
- */
-#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_BUFFERS_SIZE 128
-#endif
-
-/**
- * @brief Default bit rate.
- * @details Configuration parameter, at startup the UARTs are configured at
- * this speed.
- * @note It is possible to use @p SetUART() in order to change the working
- *       parameters at runtime.
- */
-#if !defined(DEFAULT_USART_BITRATE) || defined(__DOXYGEN__)
-#define DEFAULT_USART_BITRATE 38400
-#endif
-
-/**
- * @brief UART0 driver enable switch.
- * @details If set to @p TRUE the support for USART1 is included.
- * @note The default is @p TRUE.
- */
-#if !defined(USE_SAM7X_USART0) || defined(__DOXYGEN__)
-#define USE_SAM7X_USART0 TRUE
-#endif
-
-/**
- * @brief UART1 driver enable switch.
- * @details If set to @p TRUE the support for USART2 is included.
- * @note The default is @p TRUE.
- */
-#if !defined(USE_SAM7X_USART1) || defined(__DOXYGEN__)
-#define USE_SAM7X_USART1 TRUE
-#endif
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-  void serial_init(int prio0, int prio1);
-  void usart_setup(AT91PS_USART u, int speed, int mr);
-  CH_IRQ_HANDLER(UART0IrqHandler);
-  CH_IRQ_HANDLER(UART1IrqHandler);
-#ifdef __cplusplus
-}
-#endif
-
-/** @cond never*/
-extern FullDuplexDriver COM1, COM2;
-/** @endcond*/
-
-#endif /* _SAM7X_SERIAL_H_ */
-
-/** @} */