diff options
Diffstat (limited to 'os/halnew/platforms/STM32/SPIv1/spi_lld.c')
| -rw-r--r-- | os/halnew/platforms/STM32/SPIv1/spi_lld.c | 483 |
1 files changed, 483 insertions, 0 deletions
diff --git a/os/halnew/platforms/STM32/SPIv1/spi_lld.c b/os/halnew/platforms/STM32/SPIv1/spi_lld.c new file mode 100644 index 000000000..dad91c6a8 --- /dev/null +++ b/os/halnew/platforms/STM32/SPIv1/spi_lld.c @@ -0,0 +1,483 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32/SPIv1/spi_lld.c
+ * @brief STM32 SPI subsystem low level driver source.
+ *
+ * @addtogroup SPI
+ * @{
+ */
+
+#include "ch.h"
+#include "hal.h"
+
+#if HAL_USE_SPI || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+#define SPI1_RX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_SPI_SPI1_RX_DMA_STREAM, \
+ STM32_SPI1_RX_DMA_CHN)
+
+#define SPI1_TX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_SPI_SPI1_TX_DMA_STREAM, \
+ STM32_SPI1_TX_DMA_CHN)
+
+#define SPI2_RX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_SPI_SPI2_RX_DMA_STREAM, \
+ STM32_SPI2_RX_DMA_CHN)
+
+#define SPI2_TX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_SPI_SPI2_TX_DMA_STREAM, \
+ STM32_SPI2_TX_DMA_CHN)
+
+#define SPI3_RX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_SPI_SPI3_RX_DMA_STREAM, \
+ STM32_SPI3_RX_DMA_CHN)
+
+#define SPI3_TX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_SPI_SPI3_TX_DMA_STREAM, \
+ STM32_SPI3_TX_DMA_CHN)
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/** @brief SPI1 driver identifier.*/
+#if STM32_SPI_USE_SPI1 || defined(__DOXYGEN__)
+SPIDriver SPID1;
+#endif
+
+/** @brief SPI2 driver identifier.*/
+#if STM32_SPI_USE_SPI2 || defined(__DOXYGEN__)
+SPIDriver SPID2;
+#endif
+
+/** @brief SPI3 driver identifier.*/
+#if STM32_SPI_USE_SPI3 || defined(__DOXYGEN__)
+SPIDriver SPID3;
+#endif
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+static uint16_t dummytx;
+static uint16_t dummyrx;
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Shared end-of-rx service routine.
+ *
+ * @param[in] spip pointer to the @p SPIDriver object
+ * @param[in] flags pre-shifted content of the ISR register
+ */
+static void spi_lld_serve_rx_interrupt(SPIDriver *spip, uint32_t flags) {
+
+ /* DMA errors handling.*/
+#if defined(STM32_SPI_DMA_ERROR_HOOK)
+ if ((flags & (STM32_DMA_ISR_TEIF | STM32_DMA_ISR_DMEIF)) != 0) {
+ STM32_SPI_DMA_ERROR_HOOK(spip);
+ }
+#else
+ (void)flags;
+#endif
+
+ /* Stop everything.*/
+ dmaStreamDisable(spip->dmatx);
+ dmaStreamDisable(spip->dmarx);
+
+ /* Portable SPI ISR code defined in the high level driver, note, it is
+ a macro.*/
+ _spi_isr_code(spip);
+}
+
+/**
+ * @brief Shared end-of-tx service routine.
+ *
+ * @param[in] spip pointer to the @p SPIDriver object
+ * @param[in] flags pre-shifted content of the ISR register
+ */
+static void spi_lld_serve_tx_interrupt(SPIDriver *spip, uint32_t flags) {
+
+ /* DMA errors handling.*/
+#if defined(STM32_SPI_DMA_ERROR_HOOK)
+ (void)spip;
+ if ((flags & (STM32_DMA_ISR_TEIF | STM32_DMA_ISR_DMEIF)) != 0) {
+ STM32_SPI_DMA_ERROR_HOOK(spip);
+ }
+#else
+ (void)spip;
+ (void)flags;
+#endif
+}
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level SPI driver initialization.
+ *
+ * @notapi
+ */
+void spi_lld_init(void) {
+
+ dummytx = 0xFFFF;
+
+#if STM32_SPI_USE_SPI1
+ spiObjectInit(&SPID1);
+ SPID1.spi = SPI1;
+ SPID1.dmarx = STM32_DMA_STREAM(STM32_SPI_SPI1_RX_DMA_STREAM);
+ SPID1.dmatx = STM32_DMA_STREAM(STM32_SPI_SPI1_TX_DMA_STREAM);
+ SPID1.rxdmamode = STM32_DMA_CR_CHSEL(SPI1_RX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_SPI_SPI1_DMA_PRIORITY) |
+ STM32_DMA_CR_DIR_P2M |
+ STM32_DMA_CR_TCIE |
+ STM32_DMA_CR_DMEIE |
+ STM32_DMA_CR_TEIE;
+ SPID1.txdmamode = STM32_DMA_CR_CHSEL(SPI1_TX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_SPI_SPI1_DMA_PRIORITY) |
+ STM32_DMA_CR_DIR_M2P |
+ STM32_DMA_CR_DMEIE |
+ STM32_DMA_CR_TEIE;
+#endif
+
+#if STM32_SPI_USE_SPI2
+ spiObjectInit(&SPID2);
+ SPID2.spi = SPI2;
+ SPID2.dmarx = STM32_DMA_STREAM(STM32_SPI_SPI2_RX_DMA_STREAM);
+ SPID2.dmatx = STM32_DMA_STREAM(STM32_SPI_SPI2_TX_DMA_STREAM);
+ SPID2.rxdmamode = STM32_DMA_CR_CHSEL(SPI2_RX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_SPI_SPI2_DMA_PRIORITY) |
+ STM32_DMA_CR_DIR_P2M |
+ STM32_DMA_CR_TCIE |
+ STM32_DMA_CR_DMEIE |
+ STM32_DMA_CR_TEIE;
+ SPID2.txdmamode = STM32_DMA_CR_CHSEL(SPI2_TX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_SPI_SPI2_DMA_PRIORITY) |
+ STM32_DMA_CR_DIR_M2P |
+ STM32_DMA_CR_DMEIE |
+ STM32_DMA_CR_TEIE;
+#endif
+
+#if STM32_SPI_USE_SPI3
+ spiObjectInit(&SPID3);
+ SPID3.spi = SPI3;
+ SPID3.dmarx = STM32_DMA_STREAM(STM32_SPI_SPI3_RX_DMA_STREAM);
+ SPID3.dmatx = STM32_DMA_STREAM(STM32_SPI_SPI3_TX_DMA_STREAM);
+ SPID3.rxdmamode = STM32_DMA_CR_CHSEL(SPI3_RX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_SPI_SPI3_DMA_PRIORITY) |
+ STM32_DMA_CR_DIR_P2M |
+ STM32_DMA_CR_TCIE |
+ STM32_DMA_CR_DMEIE |
+ STM32_DMA_CR_TEIE;
+ SPID3.txdmamode = STM32_DMA_CR_CHSEL(SPI3_TX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_SPI_SPI3_DMA_PRIORITY) |
+ STM32_DMA_CR_DIR_M2P |
+ STM32_DMA_CR_DMEIE |
+ STM32_DMA_CR_TEIE;
+#endif
+}
+
+/**
+ * @brief Configures and activates the SPI peripheral.
+ *
+ * @param[in] spip pointer to the @p SPIDriver object
+ *
+ * @notapi
+ */
+void spi_lld_start(SPIDriver *spip) {
+
+ /* If in stopped state then enables the SPI and DMA clocks.*/
+ if (spip->state == SPI_STOP) {
+#if STM32_SPI_USE_SPI1
+ if (&SPID1 == spip) {
+ bool_t b;
+ b = dmaStreamAllocate(spip->dmarx,
+ STM32_SPI_SPI1_IRQ_PRIORITY,
+ (stm32_dmaisr_t)spi_lld_serve_rx_interrupt,
+ (void *)spip);
+ chDbgAssert(!b, "spi_lld_start(), #1", "stream already allocated");
+ b = dmaStreamAllocate(spip->dmatx,
+ STM32_SPI_SPI1_IRQ_PRIORITY,
+ (stm32_dmaisr_t)spi_lld_serve_tx_interrupt,
+ (void *)spip);
+ chDbgAssert(!b, "spi_lld_start(), #2", "stream already allocated");
+ rccEnableSPI1(FALSE);
+ }
+#endif
+#if STM32_SPI_USE_SPI2
+ if (&SPID2 == spip) {
+ bool_t b;
+ b = dmaStreamAllocate(spip->dmarx,
+ STM32_SPI_SPI2_IRQ_PRIORITY,
+ (stm32_dmaisr_t)spi_lld_serve_rx_interrupt,
+ (void *)spip);
+ chDbgAssert(!b, "spi_lld_start(), #3", "stream already allocated");
+ b = dmaStreamAllocate(spip->dmatx,
+ STM32_SPI_SPI2_IRQ_PRIORITY,
+ (stm32_dmaisr_t)spi_lld_serve_tx_interrupt,
+ (void *)spip);
+ chDbgAssert(!b, "spi_lld_start(), #4", "stream already allocated");
+ rccEnableSPI2(FALSE);
+ }
+#endif
+#if STM32_SPI_USE_SPI3
+ if (&SPID3 == spip) {
+ bool_t b;
+ b = dmaStreamAllocate(spip->dmarx,
+ STM32_SPI_SPI3_IRQ_PRIORITY,
+ (stm32_dmaisr_t)spi_lld_serve_rx_interrupt,
+ (void *)spip);
+ chDbgAssert(!b, "spi_lld_start(), #5", "stream already allocated");
+ b = dmaStreamAllocate(spip->dmatx,
+ STM32_SPI_SPI3_IRQ_PRIORITY,
+ (stm32_dmaisr_t)spi_lld_serve_tx_interrupt,
+ (void *)spip);
+ chDbgAssert(!b, "spi_lld_start(), #6", "stream already allocated");
+ rccEnableSPI3(FALSE);
+ }
+#endif
+
+ /* DMA setup.*/
+ dmaStreamSetPeripheral(spip->dmarx, &spip->spi->DR);
+ dmaStreamSetPeripheral(spip->dmatx, &spip->spi->DR);
+ }
+
+ /* Configuration-specific DMA setup.*/
+ if ((spip->config->cr1 & SPI_CR1_DFF) == 0) {
+ /* Frame width is 8 bits or smaller.*/
+ spip->rxdmamode = (spip->rxdmamode & ~STM32_DMA_CR_SIZE_MASK) |
+ STM32_DMA_CR_PSIZE_BYTE | STM32_DMA_CR_MSIZE_BYTE;
+ spip->txdmamode = (spip->txdmamode & ~STM32_DMA_CR_SIZE_MASK) |
+ STM32_DMA_CR_PSIZE_BYTE | STM32_DMA_CR_MSIZE_BYTE;
+ }
+ else {
+ /* Frame width is larger than 8 bits.*/
+ spip->rxdmamode = (spip->rxdmamode & ~STM32_DMA_CR_SIZE_MASK) |
+ STM32_DMA_CR_PSIZE_HWORD | STM32_DMA_CR_MSIZE_HWORD;
+ spip->txdmamode = (spip->txdmamode & ~STM32_DMA_CR_SIZE_MASK) |
+ STM32_DMA_CR_PSIZE_HWORD | STM32_DMA_CR_MSIZE_HWORD;
+ }
+ /* SPI setup and enable.*/
+ spip->spi->CR1 = 0;
+ spip->spi->CR1 = spip->config->cr1 | SPI_CR1_MSTR | SPI_CR1_SSM |
+ SPI_CR1_SSI;
+ spip->spi->CR2 = SPI_CR2_SSOE | SPI_CR2_RXDMAEN | SPI_CR2_TXDMAEN;
+ spip->spi->CR1 |= SPI_CR1_SPE;
+}
+
+/**
+ * @brief Deactivates the SPI peripheral.
+ *
+ * @param[in] spip pointer to the @p SPIDriver object
+ *
+ * @notapi
+ */
+void spi_lld_stop(SPIDriver *spip) {
+
+ /* If in ready state then disables the SPI clock.*/
+ if (spip->state == SPI_READY) {
+
+ /* SPI disable.*/
+ spip->spi->CR1 = 0;
+ spip->spi->CR2 = 0;
+ dmaStreamRelease(spip->dmarx);
+ dmaStreamRelease(spip->dmatx);
+
+#if STM32_SPI_USE_SPI1
+ if (&SPID1 == spip)
+ rccDisableSPI1(FALSE);
+#endif
+#if STM32_SPI_USE_SPI2
+ if (&SPID2 == spip)
+ rccDisableSPI2(FALSE);
+#endif
+#if STM32_SPI_USE_SPI3
+ if (&SPID3 == spip)
+ rccDisableSPI3(FALSE);
+#endif
+ }
+}
+
+/**
+ * @brief Asserts the slave select signal and prepares for transfers.
+ *
+ * @param[in] spip pointer to the @p SPIDriver object
+ *
+ * @notapi
+ */
+void spi_lld_select(SPIDriver *spip) {
+
+ palClearPad(spip->config->ssport, spip->config->sspad);
+}
+
+/**
+ * @brief Deasserts the slave select signal.
+ * @details The previously selected peripheral is unselected.
+ *
+ * @param[in] spip pointer to the @p SPIDriver object
+ *
+ * @notapi
+ */
+void spi_lld_unselect(SPIDriver *spip) {
+
+ palSetPad(spip->config->ssport, spip->config->sspad);
+}
+
+/**
+ * @brief Ignores data on the SPI bus.
+ * @details This asynchronous function starts the transmission of a series of
+ * idle words on the SPI bus and ignores the received data.
+ * @post At the end of the operation the configured callback is invoked.
+ *
+ * @param[in] spip pointer to the @p SPIDriver object
+ * @param[in] n number of words to be ignored
+ *
+ * @notapi
+ */
+void spi_lld_ignore(SPIDriver *spip, size_t n) {
+
+ dmaStreamSetMemory0(spip->dmarx, &dummyrx);
+ dmaStreamSetTransactionSize(spip->dmarx, n);
+ dmaStreamSetMode(spip->dmarx, spip->rxdmamode);
+
+ dmaStreamSetMemory0(spip->dmatx, &dummytx);
+ dmaStreamSetTransactionSize(spip->dmatx, n);
+ dmaStreamSetMode(spip->dmatx, spip->txdmamode);
+
+ dmaStreamEnable(spip->dmarx);
+ dmaStreamEnable(spip->dmatx);
+}
+
+/**
+ * @brief Exchanges data on the SPI bus.
+ * @details This asynchronous function starts a simultaneous transmit/receive
+ * operation.
+ * @post At the end of the operation the configured callback is invoked.
+ * @note The buffers are organized as uint8_t arrays for data sizes below or
+ * equal to 8 bits else it is organized as uint16_t arrays.
+ *
+ * @param[in] spip pointer to the @p SPIDriver object
+ * @param[in] n number of words to be exchanged
+ * @param[in] txbuf the pointer to the transmit buffer
+ * @param[out] rxbuf the pointer to the receive buffer
+ *
+ * @notapi
+ */
+void spi_lld_exchange(SPIDriver *spip, size_t n,
+ const void *txbuf, void *rxbuf) {
+
+ dmaStreamSetMemory0(spip->dmarx, rxbuf);
+ dmaStreamSetTransactionSize(spip->dmarx, n);
+ dmaStreamSetMode(spip->dmarx, spip->rxdmamode| STM32_DMA_CR_MINC);
+
+ dmaStreamSetMemory0(spip->dmatx, txbuf);
+ dmaStreamSetTransactionSize(spip->dmatx, n);
+ dmaStreamSetMode(spip->dmatx, spip->txdmamode | STM32_DMA_CR_MINC);
+
+ dmaStreamEnable(spip->dmarx);
+ dmaStreamEnable(spip->dmatx);
+}
+
+/**
+ * @brief Sends data over the SPI bus.
+ * @details This asynchronous function starts a transmit operation.
+ * @post At the end of the operation the configured callback is invoked.
+ * @note The buffers are organized as uint8_t arrays for data sizes below or
+ * equal to 8 bits else it is organized as uint16_t arrays.
+ *
+ * @param[in] spip pointer to the @p SPIDriver object
+ * @param[in] n number of words to send
+ * @param[in] txbuf the pointer to the transmit buffer
+ *
+ * @notapi
+ */
+void spi_lld_send(SPIDriver *spip, size_t n, const void *txbuf) {
+
+ dmaStreamSetMemory0(spip->dmarx, &dummyrx);
+ dmaStreamSetTransactionSize(spip->dmarx, n);
+ dmaStreamSetMode(spip->dmarx, spip->rxdmamode);
+
+ dmaStreamSetMemory0(spip->dmatx, txbuf);
+ dmaStreamSetTransactionSize(spip->dmatx, n);
+ dmaStreamSetMode(spip->dmatx, spip->txdmamode | STM32_DMA_CR_MINC);
+
+ dmaStreamEnable(spip->dmarx);
+ dmaStreamEnable(spip->dmatx);
+}
+
+/**
+ * @brief Receives data from the SPI bus.
+ * @details This asynchronous function starts a receive operation.
+ * @post At the end of the operation the configured callback is invoked.
+ * @note The buffers are organized as uint8_t arrays for data sizes below or
+ * equal to 8 bits else it is organized as uint16_t arrays.
+ *
+ * @param[in] spip pointer to the @p SPIDriver object
+ * @param[in] n number of words to receive
+ * @param[out] rxbuf the pointer to the receive buffer
+ *
+ * @notapi
+ */
+void spi_lld_receive(SPIDriver *spip, size_t n, void *rxbuf) {
+
+ dmaStreamSetMemory0(spip->dmarx, rxbuf);
+ dmaStreamSetTransactionSize(spip->dmarx, n);
+ dmaStreamSetMode(spip->dmarx, spip->rxdmamode | STM32_DMA_CR_MINC);
+
+ dmaStreamSetMemory0(spip->dmatx, &dummytx);
+ dmaStreamSetTransactionSize(spip->dmatx, n);
+ dmaStreamSetMode(spip->dmatx, spip->txdmamode);
+
+ dmaStreamEnable(spip->dmarx);
+ dmaStreamEnable(spip->dmatx);
+}
+
+/**
+ * @brief Exchanges one frame using a polled wait.
+ * @details This synchronous function exchanges one frame using a polled
+ * synchronization method. This function is useful when exchanging
+ * small amount of data on high speed channels, usually in this
+ * situation is much more efficient just wait for completion using
+ * polling than suspending the thread waiting for an interrupt.
+ *
+ * @param[in] spip pointer to the @p SPIDriver object
+ * @param[in] frame the data frame to send over the SPI bus
+ * @return The received data frame from the SPI bus.
+ */
+uint16_t spi_lld_polled_exchange(SPIDriver *spip, uint16_t frame) {
+
+ spip->spi->DR = frame;
+ while ((spip->spi->SR & SPI_SR_RXNE) == 0)
+ ;
+ return spip->spi->DR;
+}
+
+#endif /* HAL_USE_SPI */
+
+/** @} */
|