diff options
Diffstat (limited to 'os/hal')
-rw-r--r-- | os/hal/include/mii.h | 188 | ||||
-rw-r--r-- | os/hal/include/usb_cdc.h | 73 |
2 files changed, 0 insertions, 261 deletions
diff --git a/os/hal/include/mii.h b/os/hal/include/mii.h deleted file mode 100644 index 87612273a..000000000 --- a/os/hal/include/mii.h +++ /dev/null @@ -1,188 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010 Giovanni Di Sirio.
-
- This file is part of ChibiOS/RT.
-
- ChibiOS/RT is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- ChibiOS/RT is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/*
- * Parts of this file are borrowed by the Linux include file linux/mii.h:
- * Copyright (C) 1996, 1999, 2001 David S. Miller (davem@redhat.com)
- */
-
-/*-*
- * @file mii.h
- * @brief MII Driver macros and structures.
- *
- * @addtogroup MII
- * @{
- */
-
-#ifndef _MII_H_
-#define _MII_H_
-
-/*
- * Generic MII registers. Note, not all registers are present on all PHY
- * devices and some extra registers may be present.
- */
-#define MII_BMCR 0x00 /**< Basic mode control register. */
-#define MII_BMSR 0x01 /**< Basic mode status register. */
-#define MII_PHYSID1 0x02 /**< PHYS ID 1. */
-#define MII_PHYSID2 0x03 /**< PHYS ID 2. */
-#define MII_ADVERTISE 0x04 /**< Advertisement control reg. */
-#define MII_LPA 0x05 /**< Link partner ability reg. */
-#define MII_EXPANSION 0x06 /**< Expansion register. */
-#define MII_CTRL1000 0x09 /**< 1000BASE-T control. */
-#define MII_STAT1000 0x0a /**< 1000BASE-T status. */
-#define MII_ESTATUS 0x0f /**< Extended Status. */
-#define MII_DCOUNTER 0x12 /**< Disconnect counter. */
-#define MII_FCSCOUNTER 0x13 /**< False carrier counter. */
-#define MII_NWAYTEST 0x14 /**< N-way auto-neg test reg. */
-#define MII_RERRCOUNTER 0x15 /**< Receive error counter. */
-#define MII_SREVISION 0x16 /**< Silicon revision. */
-#define MII_RESV1 0x17 /**< Reserved. */
-#define MII_LBRERROR 0x18 /**< Lpback, rx, bypass error. */
-#define MII_PHYADDR 0x19 /**< PHY address. */
-#define MII_RESV2 0x1a /**< Reserved. */
-#define MII_TPISTATUS 0x1b /**< TPI status for 10mbps. */
-#define MII_NCONFIG 0x1c /**< Network interface config. */
-
-/*
- * Basic mode control register.
- */
-#define BMCR_RESV 0x003f /**< Unused. */
-#define BMCR_SPEED1000 0x0040 /**< MSB of Speed (1000). */
-#define BMCR_CTST 0x0080 /**< Collision test. */
-#define BMCR_FULLDPLX 0x0100 /**< Full duplex. */
-#define BMCR_ANRESTART 0x0200 /**< Auto negotiation restart. */
-#define BMCR_ISOLATE 0x0400 /**< Disconnect DP83840 from MII. */
-#define BMCR_PDOWN 0x0800 /**< Powerdown. */
-#define BMCR_ANENABLE 0x1000 /**< Enable auto negotiation. */
-#define BMCR_SPEED100 0x2000 /**< Select 100Mbps. */
-#define BMCR_LOOPBACK 0x4000 /**< TXD loopback bits. */
-#define BMCR_RESET 0x8000 /**< Reset. */
-
-/*
- * Basic mode status register.
- */
-#define BMSR_ERCAP 0x0001 /**< Ext-reg capability. */
-#define BMSR_JCD 0x0002 /**< Jabber detected. */
-#define BMSR_LSTATUS 0x0004 /**< Link status. */
-#define BMSR_ANEGCAPABLE 0x0008 /**< Able to do auto-negotiation. */
-#define BMSR_RFAULT 0x0010 /**< Remote fault detected. */
-#define BMSR_ANEGCOMPLETE 0x0020 /**< Auto-negotiation complete. */
-#define BMSR_RESV 0x00c0 /**< Unused. */
-#define BMSR_ESTATEN 0x0100 /**< Extended Status in R15. */
-#define BMSR_100HALF2 0x0200 /**< Can do 100BASE-T2 HDX. */
-#define BMSR_100FULL2 0x0400 /**< Can do 100BASE-T2 FDX. */
-#define BMSR_10HALF 0x0800 /**< Can do 10mbps, half-duplex. */
-#define BMSR_10FULL 0x1000 /**< Can do 10mbps, full-duplex. */
-#define BMSR_100HALF 0x2000 /**< Can do 100mbps, half-duplex. */
-#define BMSR_100FULL 0x4000 /**< Can do 100mbps, full-duplex. */
-#define BMSR_100BASE4 0x8000 /**< Can do 100mbps, 4k packets. */
-
-/*
- * Advertisement control register.
- */
-#define ADVERTISE_SLCT 0x001f /**< Selector bits. */
-#define ADVERTISE_CSMA 0x0001 /**< Only selector supported. */
-#define ADVERTISE_10HALF 0x0020 /**< Try for 10mbps half-duplex. */
-#define ADVERTISE_1000XFULL 0x0020 /**< Try for 1000BASE-X full-duplex.*/
-#define ADVERTISE_10FULL 0x0040 /**< Try for 10mbps full-duplex. */
-#define ADVERTISE_1000XHALF 0x0040 /**< Try for 1000BASE-X half-duplex.*/
-#define ADVERTISE_100HALF 0x0080 /**< Try for 100mbps half-duplex. */
-#define ADVERTISE_1000XPAUSE 0x0080 /**< Try for 1000BASE-X pause. */
-#define ADVERTISE_100FULL 0x0100 /**< Try for 100mbps full-duplex. */
-#define ADVERTISE_1000XPSE_ASYM 0x0100 /**< Try for 1000BASE-X asym pause. */
-#define ADVERTISE_100BASE4 0x0200 /**< Try for 100mbps 4k packets. */
-#define ADVERTISE_PAUSE_CAP 0x0400 /**< Try for pause. */
-#define ADVERTISE_PAUSE_ASYM 0x0800 /**< Try for asymetric pause. */
-#define ADVERTISE_RESV 0x1000 /**< Unused. */
-#define ADVERTISE_RFAULT 0x2000 /**< Say we can detect faults. */
-#define ADVERTISE_LPACK 0x4000 /**< Ack link partners response. */
-#define ADVERTISE_NPAGE 0x8000 /**< Next page bit. */
-
-#define ADVERTISE_FULL (ADVERTISE_100FULL | ADVERTISE_10FULL | \
- ADVERTISE_CSMA)
-#define ADVERTISE_ALL (ADVERTISE_10HALF | ADVERTISE_10FULL | \
- ADVERTISE_100HALF | ADVERTISE_100FULL)
-
-/*
- * Link partner ability register.
- */
-#define LPA_SLCT 0x001f /**< Same as advertise selector. */
-#define LPA_10HALF 0x0020 /**< Can do 10mbps half-duplex. */
-#define LPA_1000XFULL 0x0020 /**< Can do 1000BASE-X full-duplex. */
-#define LPA_10FULL 0x0040 /**< Can do 10mbps full-duplex. */
-#define LPA_1000XHALF 0x0040 /**< Can do 1000BASE-X half-duplex. */
-#define LPA_100HALF 0x0080 /**< Can do 100mbps half-duplex. */
-#define LPA_1000XPAUSE 0x0080 /**< Can do 1000BASE-X pause. */
-#define LPA_100FULL 0x0100 /**< Can do 100mbps full-duplex. */
-#define LPA_1000XPAUSE_ASYM 0x0100 /**< Can do 1000BASE-X pause asym. */
-#define LPA_100BASE4 0x0200 /**< Can do 100mbps 4k packets. */
-#define LPA_PAUSE_CAP 0x0400 /**< Can pause. */
-#define LPA_PAUSE_ASYM 0x0800 /**< Can pause asymetrically. */
-#define LPA_RESV 0x1000 /**< Unused. */
-#define LPA_RFAULT 0x2000 /**< Link partner faulted. */
-#define LPA_LPACK 0x4000 /**< Link partner acked us. */
-#define LPA_NPAGE 0x8000 /**< Next page bit. */
-
-#define LPA_DUPLEX (LPA_10FULL | LPA_100FULL)
-#define LPA_100 (LPA_100FULL | LPA_100HALF | LPA_100BASE4)
-
-/*
- * Expansion register for auto-negotiation.
- */
-#define EXPANSION_NWAY 0x0001 /**< Can do N-way auto-nego. */
-#define EXPANSION_LCWP 0x0002 /**< Got new RX page code word. */
-#define EXPANSION_ENABLENPAGE 0x0004 /**< This enables npage words. */
-#define EXPANSION_NPCAPABLE 0x0008 /**< Link partner supports npage. */
-#define EXPANSION_MFAULTS 0x0010 /**< Multiple faults detected. */
-#define EXPANSION_RESV 0xffe0 /**< Unused. */
-
-#define ESTATUS_1000_TFULL 0x2000 /**< Can do 1000BT Full. */
-#define ESTATUS_1000_THALF 0x1000 /**< Can do 1000BT Half. */
-
-/*
- * N-way test register.
- */
-#define NWAYTEST_RESV1 0x00ff /**< Unused. */
-#define NWAYTEST_LOOPBACK 0x0100 /**< Enable loopback for N-way. */
-#define NWAYTEST_RESV2 0xfe00 /**< Unused. */
-
-/*
- * 1000BASE-T Control register.
- */
-#define ADVERTISE_1000FULL 0x0200 /**< Advertise 1000BASE-T full duplex.*/
-#define ADVERTISE_1000HALF 0x0100 /**< Advertise 1000BASE-T half duplex.*/
-
-/*
- * 1000BASE-T Status register.
- */
-#define LPA_1000LOCALRXOK 0x2000 /**< Link partner local receiver status.*/
-#define LPA_1000REMRXOK 0x1000 /**< Link partner remote receiver status.*/
-#define LPA_1000FULL 0x0800 /**< Link partner 1000BASE-T full duplex.*/
-#define LPA_1000HALF 0x0400 /**< Link partner 1000BASE-T half duplex.*/
-
-/*
- * PHY identifiers.
- */
-#define MII_DM9161_ID 0x0181b8a0
-#define MII_AM79C875_ID 0x00225540
-#define MII_KS8721_ID 0x00221610
-
-#endif /* _MII_H_ */
-
-/*-* @} */
diff --git a/os/hal/include/usb_cdc.h b/os/hal/include/usb_cdc.h deleted file mode 100644 index 39df4ccf3..000000000 --- a/os/hal/include/usb_cdc.h +++ /dev/null @@ -1,73 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010 Giovanni Di Sirio.
-
- This file is part of ChibiOS/RT.
-
- ChibiOS/RT is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- ChibiOS/RT is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/*-*
- * @file usb_cdc.h
- * @brief USB Communication Device Class support header.
- *
- * @addtogroup USB_CDC
- * @{
- */
-
-#ifndef _USB_CDC_H_
-#define _USB_CDC_H_
-
-#define CDC_SEND_ENCAPSULATED_COMMAND 0x00
-#define CDC_GET_ENCAPSULATED_RESPONSE 0x01
-#define CDC_SET_COMM_FEATURE 0x02
-#define CDC_GET_COMM_FEATURE 0x03
-#define CDC_CLEAR_COMM_FEATURE 0x04
-#define CDC_SET_AUX_LINE_STATE 0x10
-#define CDC_SET_HOOK_STATE 0x11
-#define CDC_PULSE_SETUP 0x12
-#define CDC_SEND_PULSE 0x13
-#define CDC_SET_PULSE_TIME 0x14
-#define CDC_RING_AUX_JACK 0x15
-#define CDC_SET_LINE_CODING 0x20
-#define CDC_GET_LINE_CODING 0x21
-#define CDC_SET_CONTROL_LINE_STATE 0x22
-#define CDC_SEND_BREAK 0x23
-#define CDC_SET_RINGER_PARMS 0x30
-#define CDC_GET_RINGER_PARMS 0x31
-#define CDC_SET_OPERATION_PARMS 0x32
-#define CDC_GET_OPERATION_PARMS 0x33
-
-/**
- * @brief Type of Line Coding structure.
- */
-typedef struct {
- uint8_t dwDTERate[4];
- uint8_t bCharFormat;
- uint8_t bParityType;
- uint8_t bDataBits;
-} cdc_linecoding_t;
-
-#define LC_STOP_1 0
-#define LC_STOP_1P5 1
-#define LC_STOP_2 2
-
-#define LC_PARITY_NONE 0
-#define LC_PARITY_ODD 1
-#define LC_PARITY_EVEN 2
-#define LC_PARITY_MARK 3
-#define LC_PARITY_SPACE 4
-
-#endif /* _USB_CDC_H_ */
-
-/** @} */
|