diff options
Diffstat (limited to 'os/hal')
-rw-r--r-- | os/hal/ports/STM32/LLD/ADCv2/notes.txt | 2 | ||||
-rw-r--r-- | os/hal/ports/STM32/LLD/ADCv3/adc_lld.c | 574 | ||||
-rw-r--r-- | os/hal/ports/STM32/LLD/ADCv3/adc_lld.h | 760 | ||||
-rw-r--r-- | os/hal/ports/STM32/LLD/ADCv3/notes.txt | 13 | ||||
-rw-r--r-- | os/hal/ports/STM32/STM32L4xx/hal_lld.h | 6 |
5 files changed, 1354 insertions, 1 deletions
diff --git a/os/hal/ports/STM32/LLD/ADCv2/notes.txt b/os/hal/ports/STM32/LLD/ADCv2/notes.txt index 81312d063..a13d3274d 100644 --- a/os/hal/ports/STM32/LLD/ADCv2/notes.txt +++ b/os/hal/ports/STM32/LLD/ADCv2/notes.txt @@ -2,7 +2,7 @@ STM32 ADCv2 driver. Driver capability:
-- Supports the STM32 "advanced" ADC found on F2, F4 and F4 sub-families.
+- Supports the STM32 "advanced" ADC found on F2, F4 and F7 sub-families.
The file registry must export:
diff --git a/os/hal/ports/STM32/LLD/ADCv3/adc_lld.c b/os/hal/ports/STM32/LLD/ADCv3/adc_lld.c new file mode 100644 index 000000000..35f79b20a --- /dev/null +++ b/os/hal/ports/STM32/LLD/ADCv3/adc_lld.c @@ -0,0 +1,574 @@ +/*
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32F3xx/adc_lld.c
+ * @brief STM32F3xx ADC subsystem low level driver source.
+ *
+ * @addtogroup ADC
+ * @{
+ */
+
+#include "hal.h"
+
+#if HAL_USE_ADC || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+#if STM32_ADC_DUAL_MODE
+#if STM32_ADC_COMPACT_SAMPLES
+/* Compact type dual mode.*/
+#define ADC_DMA_SIZE (STM32_DMA_CR_MSIZE_HWORD | STM32_DMA_CR_PSIZE_HWORD)
+#define ADC_DMA_MDMA ADC_CCR_MDMA_HWORD
+
+#else /* !STM32_ADC_COMPACT_SAMPLES */
+/* Large type dual mode.*/
+#define ADC_DMA_SIZE (STM32_DMA_CR_MSIZE_WORD | STM32_DMA_CR_PSIZE_WORD)
+#define ADC_DMA_MDMA ADC_CCR_MDMA_WORD
+#endif /* !STM32_ADC_COMPACT_SAMPLES */
+
+#else /* !STM32_ADC_DUAL_MODE */
+#if STM32_ADC_COMPACT_SAMPLES
+/* Compact type single mode.*/
+#define ADC_DMA_SIZE (STM32_DMA_CR_MSIZE_BYTE | STM32_DMA_CR_PSIZE_BYTE)
+#define ADC_DMA_MDMA ADC_CCR_MDMA_DISABLED
+
+#else /* !STM32_ADC_COMPACT_SAMPLES */
+/* Large type single mode.*/
+#define ADC_DMA_SIZE (STM32_DMA_CR_MSIZE_HWORD | STM32_DMA_CR_PSIZE_HWORD)
+#define ADC_DMA_MDMA ADC_CCR_MDMA_DISABLED
+#endif /* !STM32_ADC_COMPACT_SAMPLES */
+#endif /* !STM32_ADC_DUAL_MODE */
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/** @brief ADC1 driver identifier.*/
+#if STM32_ADC_USE_ADC1 || defined(__DOXYGEN__)
+ADCDriver ADCD1;
+#endif
+
+/** @brief ADC1 driver identifier.*/
+#if STM32_ADC_USE_ADC3 || defined(__DOXYGEN__)
+ADCDriver ADCD3;
+#endif
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+static const ADCConfig default_config = {
+ difsel: 0
+};
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables the ADC voltage regulator.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ */
+static void adc_lld_vreg_on(ADCDriver *adcp) {
+
+ adcp->adcm->CR = 0; /* RM 12.4.3.*/
+ adcp->adcm->CR = ADC_CR_ADVREGEN_0;
+#if STM32_ADC_DUAL_MODE
+ adcp->adcs->CR = ADC_CR_ADVREGEN_0;
+#endif
+ osalSysPolledDelayX(OSAL_US2RTC(STM32_HCLK, 10));
+}
+
+/**
+ * @brief Disables the ADC voltage regulator.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ */
+static void adc_lld_vreg_off(ADCDriver *adcp) {
+
+ adcp->adcm->CR = 0; /* RM 12.4.3.*/
+ adcp->adcm->CR = ADC_CR_ADVREGEN_1;
+#if STM32_ADC_DUAL_MODE
+ adcp->adcs->CR = ADC_CR_ADVREGEN_1;
+#endif
+}
+
+/**
+ * @brief Enables the ADC analog circuit.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ */
+static void adc_lld_analog_on(ADCDriver *adcp) {
+
+ adcp->adcm->CR |= ADC_CR_ADEN;
+ while ((adcp->adcm->ISR & ADC_ISR_ADRD) == 0)
+ ;
+#if STM32_ADC_DUAL_MODE
+ adcp->adcs->CR |= ADC_CR_ADEN;
+ while ((adcp->adcs->ISR & ADC_ISR_ADRD) == 0)
+ ;
+#endif
+}
+
+/**
+ * @brief Disables the ADC analog circuit.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ */
+static void adc_lld_analog_off(ADCDriver *adcp) {
+
+ adcp->adcm->CR |= ADC_CR_ADDIS;
+ while ((adcp->adcm->CR & ADC_CR_ADDIS) != 0)
+ ;
+#if STM32_ADC_DUAL_MODE
+ adcp->adcs->CR |= ADC_CR_ADDIS;
+ while ((adcp->adcs->CR & ADC_CR_ADDIS) != 0)
+ ;
+#endif
+}
+
+/**
+ * @brief Calibrates and ADC unit.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ */
+static void adc_lld_calibrate(ADCDriver *adcp) {
+
+ osalDbgAssert(adcp->adcm->CR == ADC_CR_ADVREGEN_0, "invalid register state");
+ adcp->adcm->CR |= ADC_CR_ADCAL;
+ while ((adcp->adcm->CR & ADC_CR_ADCAL) != 0)
+ ;
+#if STM32_ADC_DUAL_MODE
+ osalDbgAssert(adcp->adcs->CR == ADC_CR_ADVREGEN_0, "invalid register state");
+ adcp->adcs->CR |= ADC_CR_ADCAL;
+ while ((adcp->adcs->CR & ADC_CR_ADCAL) != 0)
+ ;
+#endif
+}
+
+/**
+ * @brief Stops an ongoing conversion, if any.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ */
+static void adc_lld_stop_adc(ADCDriver *adcp) {
+
+ if (adcp->adcm->CR & ADC_CR_ADSTART) {
+ adcp->adcm->CR |= ADC_CR_ADSTP;
+ while (adcp->adcm->CR & ADC_CR_ADSTP)
+ ;
+ }
+}
+
+/**
+ * @brief ADC DMA ISR service routine.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ * @param[in] flags pre-shifted content of the ISR register
+ */
+static void adc_lld_serve_dma_interrupt(ADCDriver *adcp, uint32_t flags) {
+
+ /* DMA errors handling.*/
+ if ((flags & (STM32_DMA_ISR_TEIF | STM32_DMA_ISR_DMEIF)) != 0) {
+ /* DMA, this could help only if the DMA tries to access an unmapped
+ address space or violates alignment rules.*/
+ _adc_isr_error_code(adcp, ADC_ERR_DMAFAILURE);
+ }
+ else {
+ /* It is possible that the conversion group has already be reset by the
+ ADC error handler, in this case this interrupt is spurious.*/
+ if (adcp->grpp != NULL) {
+ if ((flags & STM32_DMA_ISR_TCIF) != 0) {
+ /* Transfer complete processing.*/
+ _adc_isr_full_code(adcp);
+ }
+ else if ((flags & STM32_DMA_ISR_HTIF) != 0) {
+ /* Half transfer processing.*/
+ _adc_isr_half_code(adcp);
+ }
+ }
+ }
+}
+
+/**
+ * @brief ADC ISR service routine.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ * @param[in] isr content of the ISR register
+ */
+static void adc_lld_serve_interrupt(ADCDriver *adcp, uint32_t isr) {
+
+ /* It could be a spurious interrupt caused by overflows after DMA disabling,
+ just ignore it in this case.*/
+ if (adcp->grpp != NULL) {
+ /* Note, an overflow may occur after the conversion ended before the driver
+ is able to stop the ADC, this is why the DMA channel is checked too.*/
+ if ((isr & ADC_ISR_OVR) &&
+ (dmaStreamGetTransactionSize(adcp->dmastp) > 0)) {
+ /* ADC overflow condition, this could happen only if the DMA is unable
+ to read data fast enough.*/
+ _adc_isr_error_code(adcp, ADC_ERR_OVERFLOW);
+ }
+ if (isr & ADC_ISR_AWD1) {
+ /* Analog watchdog error.*/
+ _adc_isr_error_code(adcp, ADC_ERR_AWD1);
+ }
+ if (isr & ADC_ISR_AWD2) {
+ /* Analog watchdog error.*/
+ _adc_isr_error_code(adcp, ADC_ERR_AWD2);
+ }
+ if (isr & ADC_ISR_AWD3) {
+ /* Analog watchdog error.*/
+ _adc_isr_error_code(adcp, ADC_ERR_AWD3);
+ }
+ }
+}
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+#if STM32_ADC_USE_ADC1 || defined(__DOXYGEN__)
+/**
+ * @brief ADC1/ADC2 interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(Vector88) {
+ uint32_t isr;
+
+ OSAL_IRQ_PROLOGUE();
+
+#if STM32_ADC_DUAL_MODE
+ isr = ADC1->ISR;
+ isr |= ADC2->ISR;
+ ADC1->ISR = isr;
+ ADC2->ISR = isr;
+#else /* !STM32_ADC_DUAL_MODE */
+ isr = ADC1->ISR;
+ ADC1->ISR = isr;
+#endif /* !STM32_ADC_DUAL_MODE */
+
+ adc_lld_serve_interrupt(&ADCD1, isr);
+
+ OSAL_IRQ_EPILOGUE();
+}
+#endif /* STM32_ADC_USE_ADC1 */
+
+#if STM32_ADC_USE_ADC3 || defined(__DOXYGEN__)
+/**
+ * @brief ADC3 interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(VectorFC) {
+ uint32_t isr;
+
+ OSAL_IRQ_PROLOGUE();
+
+ isr = ADC3->ISR;
+ ADC3->ISR = isr;
+
+ adc_lld_serve_interrupt(&ADCD3, isr);
+
+ OSAL_IRQ_EPILOGUE();
+}
+
+#if STM32_ADC_DUAL_MODE
+/**
+ * @brief ADC4 interrupt handler (as ADC3 slave).
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(Vector134) {
+ uint32_t isr;
+
+ OSAL_IRQ_PROLOGUE();
+
+ isr = ADC4->ISR;
+ ADC4->ISR = isr;
+
+ adc_lld_serve_interrupt(&ADCD3, isr);
+
+ OSAL_IRQ_EPILOGUE();
+}
+#endif /* STM32_ADC_DUAL_MODE */
+#endif /* STM32_ADC_USE_ADC3 */
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level ADC driver initialization.
+ *
+ * @notapi
+ */
+void adc_lld_init(void) {
+
+#if STM32_ADC_USE_ADC1
+ /* Driver initialization.*/
+ adcObjectInit(&ADCD1);
+#if defined(ADC1_2_COMMON)
+ ADCD1.adcc = ADC1_2_COMMON;
+#else
+ ADCD1.adcc = ADC1_COMMON;
+#endif
+ ADCD1.adcm = ADC1;
+#if STM32_ADC_DUAL_MODE
+ ADCD1.adcs = ADC2;
+#endif
+ ADCD1.dmastp = STM32_DMA1_STREAM1;
+ ADCD1.dmamode = ADC_DMA_SIZE |
+ STM32_DMA_CR_PL(STM32_ADC_ADC12_DMA_PRIORITY) |
+ STM32_DMA_CR_DIR_P2M |
+ STM32_DMA_CR_MINC | STM32_DMA_CR_TCIE |
+ STM32_DMA_CR_DMEIE | STM32_DMA_CR_TEIE;
+ nvicEnableVector(ADC1_2_IRQn, STM32_ADC_ADC12_IRQ_PRIORITY);
+#endif /* STM32_ADC_USE_ADC1 */
+
+#if STM32_ADC_USE_ADC3
+ /* Driver initialization.*/
+ adcObjectInit(&ADCD3);
+#if defined(ADC3_4_COMMON)
+ ADCD3.adcc = ADC3_4_COMMON;
+#else
+ ADCD3.adcc = ADC3_COMMON;
+#endif
+ ADCD3.adcm = ADC3;
+#if STM32_ADC_DUAL_MODE
+ ADCD3.adcs = ADC4;
+#endif
+ ADCD3.dmastp = STM32_DMA2_STREAM5;
+ ADCD3.dmamode = ADC_DMA_SIZE |
+ STM32_DMA_CR_PL(STM32_ADC_ADC12_DMA_PRIORITY) |
+ STM32_DMA_CR_DIR_P2M |
+ STM32_DMA_CR_MINC | STM32_DMA_CR_TCIE |
+ STM32_DMA_CR_DMEIE | STM32_DMA_CR_TEIE;
+ nvicEnableVector(ADC3_IRQn, STM32_ADC_ADC34_IRQ_PRIORITY);
+#if STM32_ADC_DUAL_MODE
+ nvicEnableVector(ADC4_IRQn, STM32_ADC_ADC34_IRQ_PRIORITY);
+#endif
+#endif /* STM32_ADC_USE_ADC3 */
+}
+
+/**
+ * @brief Configures and activates the ADC peripheral.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ *
+ * @notapi
+ */
+void adc_lld_start(ADCDriver *adcp) {
+
+ /* Handling the default configuration.*/
+ if (adcp->config == NULL) {
+ adcp->config = &default_config;
+ }
+
+ /* If in stopped state then enables the ADC and DMA clocks.*/
+ if (adcp->state == ADC_STOP) {
+#if STM32_ADC_USE_ADC1
+ if (&ADCD1 == adcp) {
+ bool b;
+ b = dmaStreamAllocate(adcp->dmastp,
+ STM32_ADC_ADC12_DMA_IRQ_PRIORITY,
+ (stm32_dmaisr_t)adc_lld_serve_dma_interrupt,
+ (void *)adcp);
+ osalDbgAssert(!b, "stream already allocated");
+ rccEnableADC12(FALSE);
+ }
+#endif /* STM32_ADC_USE_ADC1 */
+
+#if STM32_ADC_USE_ADC3
+ if (&ADCD3 == adcp) {
+ bool b;
+ b = dmaStreamAllocate(adcp->dmastp,
+ STM32_ADC_ADC34_DMA_IRQ_PRIORITY,
+ (stm32_dmaisr_t)adc_lld_serve_dma_interrupt,
+ (void *)adcp);
+ osalDbgAssert(!b, "stream already allocated");
+ rccEnableADC34(FALSE);
+ }
+#endif /* STM32_ADC_USE_ADC2 */
+
+ /* Setting DMA peripheral-side pointer.*/
+#if STM32_ADC_DUAL_MODE
+ dmaStreamSetPeripheral(adcp->dmastp, &adcp->adcc->CDR);
+#else
+ dmaStreamSetPeripheral(adcp->dmastp, &adcp->adcm->DR);
+#endif
+
+ /* Clock source setting.*/
+ adcp->adcc->CCR = STM32_ADC_ADC12_CLOCK_MODE | ADC_DMA_MDMA;
+
+
+ /* Differential channels setting.*/
+#if STM32_ADC_DUAL_MODE
+ adcp->adcm->DIFSEL = adcp->config->difsel;
+ adcp->adcs->DIFSEL = adcp->config->difsel;
+#else
+ adcp->adcm->DIFSEL = adcp->config->difsel;
+#endif
+
+ /* Master ADC calibration.*/
+ adc_lld_vreg_on(adcp);
+ adc_lld_calibrate(adcp);
+
+ /* Master ADC enabled here in order to reduce conversions latencies.*/
+ adc_lld_analog_on(adcp);
+ }
+}
+
+/**
+ * @brief Deactivates the ADC peripheral.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ *
+ * @notapi
+ */
+void adc_lld_stop(ADCDriver *adcp) {
+
+ /* If in ready state then disables the ADC clock and analog part.*/
+ if (adcp->state == ADC_READY) {
+
+ /* Releasing the associated DMA channel.*/
+ dmaStreamRelease(adcp->dmastp);
+
+ /* Stopping the ongoing conversion, if any.*/
+ adc_lld_stop_adc(adcp);
+
+ /* Disabling ADC analog circuit and regulator.*/
+ adc_lld_analog_off(adcp);
+ adc_lld_vreg_off(adcp);
+
+#if STM32_ADC_USE_ADC1
+ if (&ADCD1 == adcp)
+ rccDisableADC12(FALSE);
+#endif
+
+#if STM32_ADC_USE_ADC3
+ if (&ADCD3 == adcp)
+ rccDisableADC34(FALSE);
+#endif
+ }
+}
+
+/**
+ * @brief Starts an ADC conversion.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ *
+ * @notapi
+ */
+void adc_lld_start_conversion(ADCDriver *adcp) {
+ uint32_t dmamode, ccr, cfgr;
+ const ADCConversionGroup *grpp = adcp->grpp;
+
+ osalDbgAssert(!STM32_ADC_DUAL_MODE || ((grpp->num_channels & 1) == 0),
+ "odd number of channels in dual mode");
+
+ /* Calculating control registers values.*/
+ dmamode = adcp->dmamode;
+ ccr = grpp->ccr | (adcp->adcc->CCR & (ADC_CCR_CKMODE_MASK |
+ ADC_CCR_MDMA_MASK));
+ cfgr = grpp->cfgr | ADC_CFGR_DMAEN;
+ if (grpp->circular) {
+ dmamode |= STM32_DMA_CR_CIRC;
+#if STM32_ADC_DUAL_MODE
+ ccr |= ADC_CCR_DMACFG_CIRCULAR;
+#else
+ cfgr |= ADC_CFGR_DMACFG_CIRCULAR;
+#endif
+ if (adcp->depth > 1) {
+ /* If circular buffer depth > 1, then the half transfer interrupt
+ is enabled in order to allow streaming processing.*/
+ dmamode |= STM32_DMA_CR_HTIE;
+ }
+ }
+
+ /* DMA setup.*/
+ dmaStreamSetMemory0(adcp->dmastp, adcp->samples);
+#if STM32_ADC_DUAL_MODE
+ dmaStreamSetTransactionSize(adcp->dmastp, ((uint32_t)grpp->num_channels/2) *
+ (uint32_t)adcp->depth);
+#else
+ dmaStreamSetTransactionSize(adcp->dmastp, (uint32_t)grpp->num_channels *
+ (uint32_t)adcp->depth);
+#endif
+ dmaStreamSetMode(adcp->dmastp, dmamode);
+ dmaStreamEnable(adcp->dmastp);
+
+ /* Configuring the CCR register with the static settings ORed with
+ the user-specified settings in the conversion group configuration
+ structure.*/
+ adcp->adcc->CCR = ccr;
+
+ /* ADC setup, if it is defined a callback for the analog watch dog then it
+ is enabled.*/
+ adcp->adcm->ISR = adcp->adcm->ISR;
+ adcp->adcm->IER = ADC_IER_OVR | ADC_IER_AWD1;
+ adcp->adcm->TR1 = grpp->tr1;
+#if STM32_ADC_DUAL_MODE
+ adcp->adcm->SMPR1 = grpp->smpr[0];
+ adcp->adcm->SMPR2 = grpp->smpr[1];
+ adcp->adcm->SQR1 = grpp->sqr[0] | ADC_SQR1_NUM_CH(grpp->num_channels / 2);
+ adcp->adcm->SQR2 = grpp->sqr[1];
+ adcp->adcm->SQR3 = grpp->sqr[2];
+ adcp->adcm->SQR4 = grpp->sqr[3];
+ adcp->adcs->SMPR1 = grpp->ssmpr[0];
+ adcp->adcs->SMPR2 = grpp->ssmpr[1];
+ adcp->adcs->SQR1 = grpp->ssqr[0] | ADC_SQR1_NUM_CH(grpp->num_channels / 2);
+ adcp->adcs->SQR2 = grpp->ssqr[1];
+ adcp->adcs->SQR3 = grpp->ssqr[2];
+ adcp->adcs->SQR4 = grpp->ssqr[3];
+
+#else /* !STM32_ADC_DUAL_MODE */
+ adcp->adcm->SMPR1 = grpp->smpr[0];
+ adcp->adcm->SMPR2 = grpp->smpr[1];
+ adcp->adcm->SQR1 = grpp->sqr[0] | ADC_SQR1_NUM_CH(grpp->num_channels);
+ adcp->adcm->SQR2 = grpp->sqr[1];
+ adcp->adcm->SQR3 = grpp->sqr[2];
+ adcp->adcm->SQR4 = grpp->sqr[3];
+#endif /* !STM32_ADC_DUAL_MODE */
+
+ /* ADC configuration.*/
+ adcp->adcm->CFGR = cfgr;
+
+ /* Starting conversion.*/
+ adcp->adcm->CR |= ADC_CR_ADSTART;
+}
+
+/**
+ * @brief Stops an ongoing conversion.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ *
+ * @notapi
+ */
+void adc_lld_stop_conversion(ADCDriver *adcp) {
+
+ dmaStreamDisable(adcp->dmastp);
+ adc_lld_stop_adc(adcp);
+}
+
+#endif /* HAL_USE_ADC */
+
+/** @} */
diff --git a/os/hal/ports/STM32/LLD/ADCv3/adc_lld.h b/os/hal/ports/STM32/LLD/ADCv3/adc_lld.h new file mode 100644 index 000000000..51d43395e --- /dev/null +++ b/os/hal/ports/STM32/LLD/ADCv3/adc_lld.h @@ -0,0 +1,760 @@ +/*
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32F3xx/adc_lld.h
+ * @brief STM32F3xx ADC subsystem low level driver header.
+ *
+ * @addtogroup ADC
+ * @{
+ */
+
+#ifndef _ADC_LLD_H_
+#define _ADC_LLD_H_
+
+#if HAL_USE_ADC || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/**
+ * @name Available analog channels
+ * @{
+ */
+#define ADC_CHANNEL_IN1 1 /**< @brief External analog input 1. */
+#define ADC_CHANNEL_IN2 2 /**< @brief External analog input 2. */
+#define ADC_CHANNEL_IN3 3 /**< @brief External analog input 3. */
+#define ADC_CHANNEL_IN4 4 /**< @brief External analog input 4. */
+#define ADC_CHANNEL_IN5 5 /**< @brief External analog input 5. */
+#define ADC_CHANNEL_IN6 6 /**< @brief External analog input 6. */
+#define ADC_CHANNEL_IN7 7 /**< @brief External analog input 7. */
+#define ADC_CHANNEL_IN8 8 /**< @brief External analog input 8. */
+#define ADC_CHANNEL_IN9 9 /**< @brief External analog input 9. */
+#define ADC_CHANNEL_IN10 10 /**< @brief External analog input 10. */
+#define ADC_CHANNEL_IN11 11 /**< @brief External analog input 11. */
+#define ADC_CHANNEL_IN12 12 /**< @brief External analog input 12. */
+#define ADC_CHANNEL_IN13 13 /**< @brief External analog input 13. */
+#define ADC_CHANNEL_IN14 14 /**< @brief External analog input 14. */
+#define ADC_CHANNEL_IN15 15 /**< @brief External analog input 15. */
+#define ADC_CHANNEL_IN16 16 /**< @brief External analog input 16. */
+#define ADC_CHANNEL_IN17 17 /**< @brief External analog input 17. */
+#define ADC_CHANNEL_IN18 18 /**< @brief External analog input 18. */
+/** @} */
+
+/**
+ * @name Sampling rates
+ * @{
+ */
+#define ADC_SMPR_SMP_1P5 0 /**< @brief 14 cycles conversion time */
+#define ADC_SMPR_SMP_2P5 1 /**< @brief 15 cycles conversion time. */
+#define ADC_SMPR_SMP_4P5 2 /**< @brief 17 cycles conversion time. */
+#define ADC_SMPR_SMP_7P5 3 /**< @brief 20 cycles conversion time. */
+#define ADC_SMPR_SMP_19P5 4 /**< @brief 32 cycles conversion time. */
+#define ADC_SMPR_SMP_61P5 5 /**< @brief 74 cycles conversion time. */
+#define ADC_SMPR_SMP_181P5 6 /**< @brief 194 cycles conversion time. */
+#define ADC_SMPR_SMP_601P5 7 /**< @brief 614 cycles conversion time. */
+/** @} */
+
+/**
+ * @name Resolution
+ * @{
+ */
+#define ADC_CFGR1_RES_12BIT (0 << 3)
+#define ADC_CFGR1_RES_10BIT (1 << 3)
+#define ADC_CFGR1_RES_8BIT (2 << 3)
+#define ADC_CFGR1_RES_6BIT (3 << 3)
+/** @} */
+
+/**
+ * @name CFGR register configuration helpers
+ * @{
+ */
+#define ADC_CFGR_DMACFG_MASK (1 << 1)
+#define ADC_CFGR_DMACFG_ONESHOT (0 << 1)
+#define ADC_CFGR_DMACFG_CIRCULAR (1 << 1)
+
+#define ADC_CFGR_RES_MASK (3 << 3)
+#define ADC_CFGR_RES_12BITS (0 << 3)
+#define ADC_CFGR_RES_10BITS (1 << 3)
+#define ADC_CFGR_RES_8BITS (2 << 3)
+#define ADC_CFGR_RES_6BITS (3 << 3)
+
+#define ADC_CFGR_ALIGN_MASK (1 << 5)
+#define ADC_CFGR_ALIGN_RIGHT (0 << 5)
+#define ADC_CFGR_ALIGN_LEFT (1 << 5)
+
+#define ADC_CFGR_EXTSEL_MASK (15 << 6)
+#define ADC_CFGR_EXTSEL_SRC(n) ((n) << 6)
+
+#define ADC_CFGR_EXTEN_MASK (3 << 10)
+#define ADC_CFGR_EXTEN_DISABLED (0 << 10)
+#define ADC_CFGR_EXTEN_RISING (1 << 10)
+#define ADC_CFGR_EXTEN_FALLING (2 << 10)
+#define ADC_CFGR_EXTEN_BOTH (3 << 10)
+
+#define ADC_CFGR_DISCEN_MASK (1 << 16)
+#define ADC_CFGR_DISCEN_DISABLED (0 << 16)
+#define ADC_CFGR_DISCEN_ENABLED (1 << 16)
+
+#define ADC_CFGR_DISCNUM_MASK (7 << 17)
+#define ADC_CFGR_DISCNUM_VAL(n) ((n) << 17)
+
+#define ADC_CFGR_AWD1_DISABLED 0
+#define ADC_CFGR_AWD1_ALL (1 << 23)
+#define ADC_CFGR_AWD1_SINGLE(n) (((n) << 26) | (1 << 23) | (1 << 22))
+/** @} */
+
+/**
+ * @name CCR register configuration helpers
+ * @{
+ */
+#define ADC_CCR_DUAL_MASK (31 << 0)
+#define ADC_CCR_DUAL_FIELD(n) ((n) << 0)
+#define ADC_CCR_DELAY_MASK (15 << 8)
+#define ADC_CCR_DELAY_FIELD(n) ((n) << 8)
+#define ADC_CCR_DMACFG_MASK (1 << 13)
+#define ADC_CCR_DMACFG_ONESHOT (0 << 13)
+#define ADC_CCR_DMACFG_CIRCULAR (1 << 13)
+#define ADC_CCR_MDMA_MASK (3 << 14)
+#define ADC_CCR_MDMA_DISABLED (0 << 14)
+#define ADC_CCR_MDMA_WORD (2 << 14)
+#define ADC_CCR_MDMA_HWORD (3 << 14)
+#define ADC_CCR_CKMODE_MASK (3 << 16)
+#define ADC_CCR_CKMODE_ADCCK (0 << 16)
+#define ADC_CCR_CKMODE_AHB_DIV1 (1 << 16)
+#define ADC_CCR_CKMODE_AHB_DIV2 (2 << 16)
+#define ADC_CCR_CKMODE_AHB_DIV4 (3 << 16)
+
+/* F3 headers do not define the following macros, L4 headers do.*/
+#if !defined(ADC_CCR_VREFEN) || defined(__DOXYGEN__)
+#define ADC_CCR_VREFEN (1 << 22)
+#endif
+
+#if !defined(ADC_CCR_TSEN) || defined(__DOXYGEN__)
+#define ADC_CCR_TSEN (1 << 23)
+#endif
+
+#if !defined(ADC_CCR_VBATEN) || defined(__DOXYGEN__)
+#define ADC_CCR_VBATEN (1 << 24)
+#endif
+/** @} */
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @name Configuration options
+ * @{
+ */
+/**
+ * @brief Enables the ADC master/slave mode.
+ * @note In dual mode only ADCD1 and ADCD3 are available.
+ */
+#if !defined(STM32_ADC_DUAL_MODE) || defined(__DOXYGEN__)
+#define STM32_ADC_DUAL_MODE FALSE
+#endif
+
+/**
+ * @brief Makes the ADC samples type an 8bits one.
+ * @note 10 and 12 bits sampling mode must not be used when this option
+ * is enabled.
+ */
+#if !defined(STM32_ADC_COMPACT_SAMPLES) || defined(__DOXYGEN__)
+#define STM32_ADC_COMPACT_SAMPLES FALSE
+#endif
+
+/**
+ * @brief ADC1 driver enable switch.
+ * @details If set to @p TRUE the support for ADC1 is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(STM32_ADC_USE_ADC1) || defined(__DOXYGEN__)
+#define STM32_ADC_USE_ADC1 FALSE
+#endif
+
+/**
+ * @brief ADC2 driver enable switch.
+ * @details If set to @p TRUE the support for ADC2 is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(STM32_ADC_USE_ADC2) || defined(__DOXYGEN__)
+#define STM32_ADC_USE_ADC2 FALSE
+#endif
+
+/**
+ * @brief ADC3 driver enable switch.
+ * @details If set to @p TRUE the support for ADC3 is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(STM32_ADC_USE_ADC3) || defined(__DOXYGEN__)
+#define STM32_ADC_USE_ADC3 FALSE
+#endif
+/**
+ * @brief ADC4 driver enable switch.
+ * @details If set to @p TRUE the support for ADC4 is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(STM32_ADC_USE_ADC4) || defined(__DOXYGEN__)
+#define STM32_ADC_USE_ADC4 FALSE
+#endif
+
+/**
+ * @brief ADC1 DMA priority (0..3|lowest..highest).
+ */
+#if !defined(STM32_ADC_ADC1_DMA_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_ADC_ADC1_DMA_PRIORITY 2
+#endif
+
+/**
+ * @brief ADC2 DMA priority (0..3|lowest..highest).
+ */
+#if !defined(STM32_ADC_ADC2_DMA_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_ADC_ADC2_DMA_PRIORITY 2
+#endif
+
+/**
+ * @brief ADC3 DMA priority (0..3|lowest..highest).
+ */
+#if !defined(STM32_ADC_ADC3_DMA_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_ADC_ADC3_DMA_PRIORITY 2
+#endif
+
+/**
+ * @brief ADC4 DMA priority (0..3|lowest..highest).
+ */
+#if !defined(STM32_ADC_ADC4_DMA_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_ADC_ADC4_DMA_PRIORITY 2
+#endif
+
+/**
+ * @brief ADC1/ADC2 interrupt priority level setting.
+ */
+#if !defined(STM32_ADC_ADC12_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_ADC_ADC12_IRQ_PRIORITY 5
+#endif
+
+/**
+ * @brief ADC3/ADC4 interrupt priority level setting.
+ */
+#if !defined(STM32_ADC34_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_ADC_ADC34_IRQ_PRIORITY 5
+#endif
+
+/**
+ * @brief ADC1 DMA interrupt priority level setting.
+ */
+#if !defined(STM32_ADC_ADC1_DMA_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5
+#endif
+
+/**
+ * @brief ADC2 DMA interrupt priority level setting.
+ */
+#if !defined(STM32_ADC_ADC2_DMA_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5
+#endif
+
+/**
+ * @brief ADC3 DMA interrupt priority level setting.
+ */
+#if !defined(STM32_ADC_ADC3_DMA_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5
+#endif
+
+/**
+ * @brief ADC4 DMA interrupt priority level setting.
+ */
+#if !defined(STM32_ADC_ADC4_DMA_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY 5
+#endif
+
+#if defined(STM32F3XX) || defined(__DOXYGEN__)
+/**
+ * @brief ADC1/ADC2 clock source and mode.
+ */
+#if !defined(STM32_ADC_ADC12_CLOCK_MODE) || defined(__DOXYGEN__)
+#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1
+#endif
+
+/**
+ * @brief ADC3/ADC4 clock source and mode.
+ */
+#if !defined(STM32_ADC_ADC34_CLOCK_MODE) || defined(__DOXYGEN__)
+#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1
+#endif
+#endif /* defined(STM32F3XX) */
+
+#if defined(STM32L4XX) || defined(__DOXYGEN__)
+/**
+ * @brief ADC1/ADC2/ADC3 clock source and mode.
+ */
+#if !defined(STM32_ADC_ADC123_CLOCK_MODE) || defined(__DOXYGEN__)
+#define STM32_ADC_ADC123_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1
+#endif
+#endif /* defined(STM32L4XX) */
+
+/** @} */
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+/* Supported devices checks.*/
+#if !defined(STM32F3XX) && !defined(STM32L4XX)
+#error "ADCv3 only supports F3 and L4 STM32 devices"
+#endif
+
+/* Units checks.*/
+#if STM32_ADC_USE_ADC1 && !STM32_HAS_ADC1
+#error "ADC1 not present in the selected device"
+#endif
+
+#if STM32_ADC_USE_ADC2 && !STM32_HAS_ADC2
+#error "ADC2 not present in the selected device"
+#endif
+
+#if STM32_ADC_USE_ADC3 && !STM32_HAS_ADC3
+#error "ADC3 not present in the selected device"
+#endif
+
+#if STM32_ADC_USE_ADC4 && !STM32_HAS_ADC4
+#error "ADC4 not present in the selected device"
+#endif
+
+/* Units checks related to dual mode.*/
+#if STM32_ADC_DUAL_MODE && STM32_ADC_USE_ADC1 && !STM32_HAS_ADC2
+#error "ADC2 not present in the selected device"
+#endif
+
+#if STM32_ADC_DUAL_MODE && STM32_ADC_USE_ADC3 && !STM32_HAS_ADC4
+#error "ADC4 not present in the selected device"
+#endif
+
+/* At least one ADC must be assigned.*/
+#if !STM32_ADC_USE_ADC1 && !STM32_ADC_USE_ADC2 && \
+ !STM32_ADC_USE_ADC3 && !STM32_ADC_USE_ADC4
+#error "ADC driver activated but no ADC peripheral assigned"
+#endif
+
+/* ADC IRQ priority tests.*/
+#if STM32_ADC_USE_ADC1 && \
+ !OSAL_IRQ_IS_VALID_PRIORITY(STM32_ADC_ADC12_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to ADC1"
+#endif
+
+#if STM32_ADC_USE_ADC3 && \
+ !OSAL_IRQ_IS_VALID_PRIORITY(STM32_ADC_ADC34_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to ADC3"
+#endif
+
+/* DMA IRQ priority tests.*/
+#if STM32_ADC_USE_ADC1 && \
+ !OSAL_IRQ_IS_VALID_PRIORITY(STM32_ADC_ADC1_DMA_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to ADC1 DMA"
+#endif
+
+#if STM32_ADC_USE_ADC2 && \
+ !OSAL_IRQ_IS_VALID_PRIORITY(STM32_ADC_ADC2_DMA_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to ADC2 DMA"
+#endif
+
+#if STM32_ADC_USE_ADC3 && \
+ !OSAL_IRQ_IS_VALID_PRIORITY(STM32_ADC_ADC3_DMA_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to ADC3 DMA"
+#endif
+
+#if STM32_ADC_USE_ADC4 && \
+ !OSAL_IRQ_IS_VALID_PRIORITY(STM32_ADC_ADC4_DMA_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to ADC4 DMA"
+#endif
+
+/* DMA priority tests.*/
+#if STM32_ADC_USE_ADC1 && \
+ !STM32_DMA_IS_VALID_PRIORITY(STM32_ADC_ADC1_DMA_PRIORITY)
+#error "Invalid DMA priority assigned to ADC1"
+#endif
+
+#if STM32_ADC_USE_ADC2 && \
+ !STM32_DMA_IS_VALID_PRIORITY(STM32_ADC_ADC2_DMA_PRIORITY)
+#error "Invalid DMA priority assigned to ADC2"
+#endif
+
+#if STM32_ADC_USE_ADC3 && \
+ !STM32_DMA_IS_VALID_PRIORITY(STM32_ADC_ADC3_DMA_PRIORITY)
+#error "Invalid DMA priority assigned to ADC3"
+#endif
+
+#if STM32_ADC_USE_ADC4 && \
+ !STM32_DMA_IS_VALID_PRIORITY(STM32_ADC_ADC4_DMA_PRIORITY)
+#error "Invalid DMA priority assigned to ADC4"
+#endif
+
+/* ADC clock source checks.*/
+#if defined(STM32F3XX)
+#if STM32_ADC_ADC12_CLOCK_MODE == ADC_CCR_CKMODE_ADCCK
+#define STM32_ADC12_CLOCK STM32_ADC12CLK
+#elif STM32_ADC_ADC12_CLOCK_MODE == ADC_CCR_CKMODE_AHB_DIV1
+#define STM32_ADC12_CLOCK (STM32_HCLK / 1)
+#elif STM32_ADC_ADC12_CLOCK_MODE == ADC_CCR_CKMODE_AHB_DIV2
+#define STM32_ADC12_CLOCK (STM32_HCLK / 2)
+#elif STM32_ADC_ADC12_CLOCK_MODE == ADC_CCR_CKMODE_AHB_DIV4
+#define STM32_ADC12_CLOCK (STM32_HCLK / 4)
+#else
+#error "invalid clock mode selected for STM32_ADC_ADC12_CLOCK_MODE"
+#endif
+
+#if STM32_ADC_ADC34_CLOCK_MODE == ADC_CCR_CKMODE_ADCCK
+#define STM32_ADC34_CLOCK STM32_ADC34CLK
+#elif STM32_ADC_ADC34_CLOCK_MODE == ADC_CCR_CKMODE_AHB_DIV1
+#define STM32_ADC34_CLOCK (STM32_HCLK / 1)
+#elif STM32_ADC_ADC34_CLOCK_MODE == ADC_CCR_CKMODE_AHB_DIV2
+#define STM32_ADC34_CLOCK (STM32_HCLK / 2)
+#elif STM32_ADC_ADC34_CLOCK_MODE == ADC_CCR_CKMODE_AHB_DIV4
+#define STM32_ADC34_CLOCK (STM32_HCLK / 4)
+#else
+#error "invalid clock mode selected for STM32_ADC_ADC12_CLOCK_MODE"
+#endif
+
+#if STM32_ADC12_CLOCK > STM32_ADCCLK_MAX
+#error "STM32_ADC12_CLOCK exceeding maximum frequency (STM32_ADCCLK_MAX)"
+#endif
+
+#if STM32_ADC34_CLOCK > STM32_ADCCLK_MAX
+#error "STM32_ADC34_CLOCK exceeding maximum frequency (STM32_ADCCLK_MAX)"
+#endif
+#endif /* defined(STM32F3XX) */
+
+#if defined(STM32L4XX)
+#if STM32_ADC_ADC123_CLOCK_MODE == ADC_CCR_CKMODE_ADCCK
+#define STM32_ADC123_CLOCK STM32_ADC12CLK
+#elif STM32_ADC_ADC123_CLOCK_MODE == ADC_CCR_CKMODE_AHB_DIV1
+#define STM32_ADC123_CLOCK (STM32_HCLK / 1)
+#elif STM32_ADC_ADC123_CLOCK_MODE == ADC_CCR_CKMODE_AHB_DIV2
+#define STM32_ADC123_CLOCK (STM32_HCLK / 2)
+#elif STM32_ADC_ADC123_CLOCK_MODE == ADC_CCR_CKMODE_AHB_DIV4
+#define STM32_ADC123_CLOCK (STM32_HCLK / 4)
+#else
+#error "invalid clock mode selected for STM32_ADC_ADC123_CLOCK_MODE"
+#endif
+
+#if STM32_ADC123_CLOCK > STM32_ADCCLK_MAX
+#error "STM32_ADC123_CLOCK exceeding maximum frequency (STM32_ADCCLK_MAX)"
+#endif
+#endif /* defined(STM32L4XX) */
+
+#if !defined(STM32_DMA_REQUIRED)
+#define STM32_DMA_REQUIRED
+#endif
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief ADC sample data type.
+ */
+#if !STM32_ADC_COMPACT_SAMPLES || defined(__DOXYGEN__)
+typedef uint16_t adcsample_t;
+#else
+typedef uint8_t adcsample_t;
+#endif
+
+/**
+ * @brief Channels number in a conversion group.
+ */
+typedef uint16_t adc_channels_num_t;
+
+/**
+ * @brief Possible ADC failure causes.
+ * @note Error codes are architecture dependent and should not relied
+ * upon.
+ */
+typedef enum {
+ ADC_ERR_DMAFAILURE = 0, /**< DMA operations failure. */
+ ADC_ERR_OVERFLOW = 1, /**< ADC overflow condition. */
+ ADC_ERR_AWD1 = 2, /**< Watchdog 1 triggered. */
+ ADC_ERR_AWD2 = 3, /**< Watchdog 2 triggered. */
+ ADC_ERR_AWD3 = 4 /**< Watchdog 3 triggered. */
+} adcerror_t;
+
+/**
+ * @brief Type of a structure representing an ADC driver.
+ */
+typedef struct ADCDriver ADCDriver;
+
+/**
+ * @brief ADC notification callback type.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object triggering the
+ * callback
+ * @param[in] buffer pointer to the most recent samples data
+ * @param[in] n number of buffer rows available starting from @p buffer
+ */
+typedef void (*adccallback_t)(ADCDriver *adcp, adcsample_t *buffer, size_t n);
+
+/**
+ * @brief ADC error callback type.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object triggering the
+ * callback
+ * @param[in] err ADC error code
+ */
+typedef void (*adcerrorcallback_t)(ADCDriver *adcp, adcerror_t err);
+
+/**
+ * @brief Conversion group configuration structure.
+ * @details This implementation-dependent structure describes a conversion
+ * operation.
+ * @note The use of this configuration structure requires knowledge of
+ * STM32 ADC cell registers interface, please refer to the STM32
+ * reference manual for details.
+ */
+typedef struct {
+ /**
+ * @brief Enables the circular buffer mode for the group.
+ */
+ bool circular;
+ /**
+ * @brief Number of the analog channels belonging to the conversion group.
+ */
+ adc_channels_num_t num_channels;
+ /**
+ * @brief Callback function associated to the group or @p NULL.
+ */
+ adccallback_t end_cb;
+ /**
+ * @brief Error callback or @p NULL.
+ */
+ adcerrorcallback_t error_cb;
+ /* End of the mandatory fields.*/
+ /**
+ * @brief ADC CFGR register initialization data.
+ * @note The bits DMAEN and DMACFG are enforced internally
+ * to the driver, keep them to zero.
+ * @note The bits @p ADC_CFGR_CONT or @p ADC_CFGR_DISCEN must be
+ * specified in continuous more or if the buffer depth is
+ * greater than one.
+ */
+ uint32_t cfgr;
+ /**
+ * @brief ADC TR1 register initialization data.
+ */
+ uint32_t tr1;
+ /**
+ * @brief ADC CCR register initialization data.
+ * @note The bits CKMODE, MDMA, DMACFG are enforced internally to the
+ * driver, keep them to zero.
+ */
+ uint32_t ccr;
+ /**
+ * @brief ADC SMPRx registers initialization data.
+ */
+ uint32_t smpr[2];
+ /**
+ * @brief ADC SQRx register initialization data.
+ */
+ uint32_t sqr[4];
+#if STM32_ADC_DUAL_MODE || defined(__DOXYGEN__)
+ /**
+ * @brief Slave ADC SMPRx registers initialization data.
+ */
+ uint32_t ssmpr[2];
+ /**
+ * @brief Slave ADC SQRx register initialization data.
+ */
+ uint32_t ssqr[4];
+#endif /* STM32_ADC_DUAL_MODE */
+} ADCConversionGroup;
+
+/**
+ * @brief Driver configuration structure.
+ */
+typedef struct {
+ /**
+ * @brief ADC DIFSEL register initialization data.
+ */
+ uint32_t difsel;
+} ADCConfig;
+
+/**
+ * @brief Structure representing an ADC driver.
+ */
+struct ADCDriver {
+ /**
+ * @brief Driver state.
+ */
+ adcstate_t state;
+ /**
+ * @brief Current configuration data.
+ */
+ const ADCConfig *config;
+ /**
+ * @brief Current samples buffer pointer or @p NULL.
+ */
+ adcsample_t *samples;
+ /**
+ * @brief Current samples buffer depth or @p 0.
+ */
+ size_t depth;
+ /**
+ * @brief Current conversion group pointer or @p NULL.
+ */
+ const ADCConversionGroup *grpp;
+#if ADC_USE_WAIT || defined(__DOXYGEN__)
+ /**
+ * @brief Waiting thread.
+ */
+ thread_reference_t thread;
+#endif
+#if ADC_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__)
+ /**
+ * @brief Mutex protecting the peripheral.
+ */
+ mutex_t mutex;
+#endif /* ADC_USE_MUTUAL_EXCLUSION */
+#if defined(ADC_DRIVER_EXT_FIELDS)
+ ADC_DRIVER_EXT_FIELDS
+#endif
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Pointer to the common ADCx_y registers block.
+ */
+ ADC_Common_TypeDef *adcc;
+ /**
+ * @brief Pointer to the master ADCx registers block.
+ */
+ ADC_TypeDef *adcm;
+#if STM32_ADC_DUAL_MODE || defined(__DOXYGEN__)
+ /**
+ * @brief Pointer to the slave ADCx registers block.
+ */
+ ADC_TypeDef *adcs;
+#endif /* STM32_ADC_DUAL_MODE */
+ /**
+ * @brief Pointer to associated DMA channel.
+ */
+ const stm32_dma_stream_t *dmastp;
+ /**
+ * @brief DMA mode bit mask.
+ */
+ uint32_t dmamode;
+};
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/**
+ * @name Threashold register initializer
+ * @{
+ */
+#define ADC_TR(low, high) (((uint32_t)(high) << 16) | (uint32_t)(low))
+/** @} */
+
+/**
+ * @name Sequences building helper macros
+ * @{
+ */
+/**
+ * @brief Number of channels in a conversion sequence.
+ */
+#define ADC_SQR1_NUM_CH(n) (((n) - 1) << 0)
+
+#define ADC_SQR1_SQ1_N(n) ((n) << 6) /**< @brief 1st channel in seq. */
+#define ADC_SQR1_SQ2_N(n) ((n) << 12) /**< @brief 2nd channel in seq. */
+#define ADC_SQR1_SQ3_N(n) ((n) << 18) /**< @brief 3rd channel in seq. */
+#define ADC_SQR1_SQ4_N(n) ((n) << 24) /**< @brief 4th channel in seq. */
+
+#define ADC_SQR2_SQ5_N(n) ((n) << 0) /**< @brief 5th channel in seq. */
+#define ADC_SQR2_SQ6_N(n) ((n) << 6) /**< @brief 6th channel in seq. */
+#define ADC_SQR2_SQ7_N(n) ((n) << 12) /**< @brief 7th channel in seq. */
+#define ADC_SQR2_SQ8_N(n) ((n) << 18) /**< @brief 8th channel in seq. */
+#define ADC_SQR2_SQ9_N(n) ((n) << 24) /**< @brief 9th channel in seq. */
+
+#define ADC_SQR3_SQ10_N(n) ((n) << 0) /**< @brief 10th channel in seq.*/
+#define ADC_SQR3_SQ11_N(n) ((n) << 6) /**< @brief 11th channel in seq.*/
+#define ADC_SQR3_SQ12_N(n) ((n) << 12) /**< @brief 12th channel in seq.*/
+#define ADC_SQR3_SQ13_N(n) ((n) << 18) /**< @brief 13th channel in seq.*/
+#define ADC_SQR3_SQ14_N(n) ((n) << 24) /**< @brief 14th channel in seq.*/
+
+#define ADC_SQR4_SQ15_N(n) ((n) << 0) /**< @brief 15th channel in seq.*/
+#define ADC_SQR4_SQ16_N(n) ((n) << 6) /**< @brief 16th channel in seq.*/
+/** @} */
+
+/**
+ * @name Sampling rate settings helper macros
+ * @{
+ */
+#define ADC_SMPR1_SMP_AN1(n) ((n) << 3) /**< @brief AN1 sampling time. */
+#define ADC_SMPR1_SMP_AN2(n) ((n) << 6) /**< @brief AN2 sampling time. */
+#define ADC_SMPR1_SMP_AN3(n) ((n) << 9) /**< @brief AN3 sampling time. */
+#define ADC_SMPR1_SMP_AN4(n) ((n) << 12) /**< @brief AN4 sampling time. */
+#define ADC_SMPR1_SMP_AN5(n) ((n) << 15) /**< @brief AN5 sampling time. */
+#define ADC_SMPR1_SMP_AN6(n) ((n) << 18) /**< @brief AN6 sampling time. */
+#define ADC_SMPR1_SMP_AN7(n) ((n) << 21) /**< @brief AN7 sampling time. */
+#define ADC_SMPR1_SMP_AN8(n) ((n) << 24) /**< @brief AN8 sampling time. */
+#define ADC_SMPR1_SMP_AN9(n) ((n) << 27) /**< @brief AN9 sampling time. */
+
+#define ADC_SMPR2_SMP_AN10(n) ((n) << 0) /**< @brief AN10 sampling time. */
+#define ADC_SMPR2_SMP_AN11(n) ((n) << 3) /**< @brief AN11 sampling time. */
+#define ADC_SMPR2_SMP_AN12(n) ((n) << 6) /**< @brief AN12 sampling time. */
+#define ADC_SMPR2_SMP_AN13(n) ((n) << 9) /**< @brief AN13 sampling time. */
+#define ADC_SMPR2_SMP_AN14(n) ((n) << 12) /**< @brief AN14 sampling time. */
+#define ADC_SMPR2_SMP_AN15(n) ((n) << 15) /**< @brief AN15 sampling time. */
+#define ADC_SMPR2_SMP_AN16(n) ((n) << 18) /**< @brief AN16 sampling time. */
+#define ADC_SMPR2_SMP_AN17(n) ((n) << 21) /**< @brief AN17 sampling time. */
+#define ADC_SMPR2_SMP_AN18(n) ((n) << 24) /**< @brief AN18 sampling time. */
+/** @} */
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#if STM32_ADC_USE_ADC1 && !defined(__DOXYGEN__)
+extern ADCDriver ADCD1;
+#endif
+
+#if STM32_ADC_USE_ADC2 && !defined(__DOXYGEN__)
+extern ADCDriver ADCD2;
+#endif
+
+#if STM32_ADC_USE_ADC3 && !defined(__DOXYGEN__)
+extern ADCDriver ADCD3;
+#endif
+
+#if STM32_ADC_USE_ADC4 && !defined(__DOXYGEN__)
+extern ADCDriver ADCD4;
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void adc_lld_init(void);
+ void adc_lld_start(ADCDriver *adcp);
+ void adc_lld_stop(ADCDriver *adcp);
+ void adc_lld_start_conversion(ADCDriver *adcp);
+ void adc_lld_stop_conversion(ADCDriver *adcp);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_ADC */
+
+#endif /* _ADC_LLD_H_ */
+
+/** @} */
diff --git a/os/hal/ports/STM32/LLD/ADCv3/notes.txt b/os/hal/ports/STM32/LLD/ADCv3/notes.txt new file mode 100644 index 000000000..2a8bf0137 --- /dev/null +++ b/os/hal/ports/STM32/LLD/ADCv3/notes.txt @@ -0,0 +1,13 @@ +STM32 ADCv2 driver.
+
+Driver capability:
+
+- Supports the STM32 "fast" ADC found on F3 and L4 sub-families.
+
+The file registry must export:
+
+STM32_HAS_ADCx - ADCx presence flag (1..3).
+STM32_ADC_HANDLER - IRQ vector name for ADCs (shared).
+STM32_ADC_NUMBER - IRQ vector number for ADCs (shared).
+STM32_ADCx_DMA_MSK - Mask of the compatible DMA channels.
+STM32_ADCx_DMA_CHN - Mask of the channels mapping.
diff --git a/os/hal/ports/STM32/STM32L4xx/hal_lld.h b/os/hal/ports/STM32/STM32L4xx/hal_lld.h index 2827f2fa2..370741c78 100644 --- a/os/hal/ports/STM32/STM32L4xx/hal_lld.h +++ b/os/hal/ports/STM32/STM32L4xx/hal_lld.h @@ -872,6 +872,11 @@ * @brief Maximum APB2 clock frequency.
*/
#define STM32_PCLK2_MAX 80000000
+
+/**
+ * @brief Maximum ADC clock frequency.
+ */
+#define STM32_ADCCLK_MAX 80000000
/** @} */
/**
@@ -906,6 +911,7 @@ #define STM32_PLLR_MIN 8000000
#define STM32_PCLK1_MAX 26000000
#define STM32_PCLK2_MAX 26000000
+#define STM32_ADCCLK_MAX 26000000
#define STM32_0WS_THRESHOLD 6000000
#define STM32_1WS_THRESHOLD 12000000
|