diff options
Diffstat (limited to 'os/hal')
-rw-r--r-- | os/hal/platforms/STM32/USARTv1/serial_lld.c (renamed from os/hal/platforms/STM32/serial_lld.c) | 121 | ||||
-rw-r--r-- | os/hal/platforms/STM32/USARTv1/serial_lld.h (renamed from os/hal/platforms/STM32/serial_lld.h) | 0 | ||||
-rw-r--r-- | os/hal/platforms/STM32/USARTv2/serial_lld.c | 526 | ||||
-rw-r--r-- | os/hal/platforms/STM32/USARTv2/serial_lld.h | 306 | ||||
-rw-r--r-- | os/hal/platforms/STM32F0xx/platform.mk | 2 | ||||
-rw-r--r-- | os/hal/platforms/STM32F1xx/platform.mk | 2 | ||||
-rw-r--r-- | os/hal/platforms/STM32F3xx/platform.mk | 4 | ||||
-rw-r--r-- | os/hal/platforms/STM32F4xx/platform.mk | 2 | ||||
-rw-r--r-- | os/hal/platforms/STM32L1xx/platform.mk | 2 |
9 files changed, 838 insertions, 127 deletions
diff --git a/os/hal/platforms/STM32/serial_lld.c b/os/hal/platforms/STM32/USARTv1/serial_lld.c index 92ef8c5ef..1f069b34a 100644 --- a/os/hal/platforms/STM32/serial_lld.c +++ b/os/hal/platforms/STM32/USARTv1/serial_lld.c @@ -82,125 +82,6 @@ static const SerialConfig default_config = /* Driver local functions. */
/*===========================================================================*/
-/* Local functions have different implementations depending on the USART type,
- STM32F0xx devices and newer have an enhanced peripheral with slightly
- different register interface.*/
-
-#if defined(STM32F0XX)
-
-/**
- * @brief USART initialization.
- * @details This function must be invoked with interrupts disabled.
- *
- * @param[in] sdp pointer to a @p SerialDriver object
- * @param[in] config the architecture-dependent serial driver configuration
- */
-static void usart_init(SerialDriver *sdp, const SerialConfig *config) {
- USART_TypeDef *u = sdp->usart;
-
- /* Baud rate setting.*/
- if (sdp->usart == USART1)
- u->BRR = STM32_USART1CLK / config->sc_speed;
- else
- u->BRR = STM32_PCLK / config->sc_speed;
-
- /* Note that some bits are enforced.*/
- u->CR1 = config->sc_cr1 | USART_CR1_UE | USART_CR1_PEIE |
- USART_CR1_RXNEIE | USART_CR1_TE |
- USART_CR1_RE;
- u->CR2 = config->sc_cr2 | USART_CR2_LBDIE;
- u->CR3 = config->sc_cr3 | USART_CR3_EIE;
- u->ICR = 0xFFFFFFFF;
-}
-
-/**
- * @brief USART de-initialization.
- * @details This function must be invoked with interrupts disabled.
- *
- * @param[in] u pointer to an USART I/O block
- */
-static void usart_deinit(USART_TypeDef *u) {
-
- u->CR1 = 0;
- u->CR2 = 0;
- u->CR3 = 0;
-}
-
-/**
- * @brief Error handling routine.
- *
- * @param[in] sdp pointer to a @p SerialDriver object
- * @param[in] isr USART ISR register value
- */
-static void set_error(SerialDriver *sdp, uint16_t isr) {
- flagsmask_t sts = 0;
-
- if (isr & USART_ISR_ORE)
- sts |= SD_OVERRUN_ERROR;
- if (isr & USART_ISR_PE)
- sts |= SD_PARITY_ERROR;
- if (isr & USART_ISR_FE)
- sts |= SD_FRAMING_ERROR;
- if (isr & USART_ISR_NE)
- sts |= SD_NOISE_ERROR;
- chSysLockFromIsr();
- chnAddFlagsI(sdp, sts);
- chSysUnlockFromIsr();
-}
-
-/**
- * @brief Common IRQ handler.
- *
- * @param[in] sdp communication channel associated to the USART
- */
-static void serve_interrupt(SerialDriver *sdp) {
- USART_TypeDef *u = sdp->usart;
- uint16_t cr1 = u->CR1;
- uint16_t isr;
-
- /* Reading and clearing status.*/
- isr = u->ISR;
- u->ICR = isr;
-
- /* Error condition detection.*/
- if (isr & (USART_ISR_ORE | USART_ISR_NE | USART_ISR_FE | USART_ISR_PE))
- set_error(sdp, isr);
- /* Special case, LIN break detection.*/
- if (isr & USART_ISR_LBD) {
- chSysLockFromIsr();
- chnAddFlagsI(sdp, SD_BREAK_DETECTED);
- chSysUnlockFromIsr();
- }
- /* Data available.*/
- if (isr & USART_ISR_RXNE) {
- chSysLockFromIsr();
- sdIncomingDataI(sdp, (uint8_t)u->RDR);
- chSysUnlockFromIsr();
- }
- /* Transmission buffer empty.*/
- if ((cr1 & USART_CR1_TXEIE) && (isr & USART_ISR_TXE)) {
- msg_t b;
- chSysLockFromIsr();
- b = chOQGetI(&sdp->oqueue);
- if (b < Q_OK) {
- chnAddFlagsI(sdp, CHN_OUTPUT_EMPTY);
- u->CR1 = (cr1 & ~USART_CR1_TXEIE) | USART_CR1_TCIE;
- }
- else
- u->TDR = b;
- chSysUnlockFromIsr();
- }
- /* Physical transmission end.*/
- if (isr & USART_ISR_TC) {
- chSysLockFromIsr();
- chnAddFlagsI(sdp, CHN_TRANSMISSION_END);
- chSysUnlockFromIsr();
- u->CR1 = cr1 & ~USART_CR1_TCIE;
- }
-}
-
-#else /* !defined(STM32F0XX) */
-
/**
* @brief USART initialization.
* @details This function must be invoked with interrupts disabled.
@@ -317,8 +198,6 @@ static void serve_interrupt(SerialDriver *sdp) { }
}
-#endif /* !defined(STM32F0XX) */
-
#if STM32_SERIAL_USE_USART1 || defined(__DOXYGEN__)
static void notify1(GenericQueue *qp) {
diff --git a/os/hal/platforms/STM32/serial_lld.h b/os/hal/platforms/STM32/USARTv1/serial_lld.h index d98cb14bd..d98cb14bd 100644 --- a/os/hal/platforms/STM32/serial_lld.h +++ b/os/hal/platforms/STM32/USARTv1/serial_lld.h diff --git a/os/hal/platforms/STM32/USARTv2/serial_lld.c b/os/hal/platforms/STM32/USARTv2/serial_lld.c new file mode 100644 index 000000000..b48996f45 --- /dev/null +++ b/os/hal/platforms/STM32/USARTv2/serial_lld.c @@ -0,0 +1,526 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
+ 2011,2012 Giovanni Di Sirio.
+
+ This file is part of ChibiOS/RT.
+
+ ChibiOS/RT is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ ChibiOS/RT is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/**
+ * @file STM32/serial_lld.c
+ * @brief STM32 low level serial driver code.
+ *
+ * @addtogroup SERIAL
+ * @{
+ */
+
+#include "ch.h"
+#include "hal.h"
+
+#if HAL_USE_SERIAL || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/** @brief USART1 serial driver identifier.*/
+#if STM32_SERIAL_USE_USART1 || defined(__DOXYGEN__)
+SerialDriver SD1;
+#endif
+
+/** @brief USART2 serial driver identifier.*/
+#if STM32_SERIAL_USE_USART2 || defined(__DOXYGEN__)
+SerialDriver SD2;
+#endif
+
+/** @brief USART3 serial driver identifier.*/
+#if STM32_SERIAL_USE_USART3 || defined(__DOXYGEN__)
+SerialDriver SD3;
+#endif
+
+/** @brief UART4 serial driver identifier.*/
+#if STM32_SERIAL_USE_UART4 || defined(__DOXYGEN__)
+SerialDriver SD4;
+#endif
+
+/** @brief UART5 serial driver identifier.*/
+#if STM32_SERIAL_USE_UART5 || defined(__DOXYGEN__)
+SerialDriver SD5;
+#endif
+
+/** @brief USART6 serial driver identifier.*/
+#if STM32_SERIAL_USE_USART6 || defined(__DOXYGEN__)
+SerialDriver SD6;
+#endif
+
+/*===========================================================================*/
+/* Driver local variables. */
+/*===========================================================================*/
+
+/** @brief Driver default configuration.*/
+static const SerialConfig default_config =
+{
+ SERIAL_DEFAULT_BITRATE,
+ 0,
+ USART_CR2_STOP1_BITS | USART_CR2_LINEN,
+ 0
+};
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/**
+ * @brief USART initialization.
+ * @details This function must be invoked with interrupts disabled.
+ *
+ * @param[in] sdp pointer to a @p SerialDriver object
+ * @param[in] config the architecture-dependent serial driver configuration
+ */
+static void usart_init(SerialDriver *sdp, const SerialConfig *config) {
+ USART_TypeDef *u = sdp->usart;
+
+ /* Baud rate setting.*/
+ if (sdp->usart == USART1)
+ u->BRR = STM32_USART1CLK / config->sc_speed;
+ else
+ u->BRR = STM32_PCLK / config->sc_speed;
+
+ /* Note that some bits are enforced.*/
+ u->CR2 = config->sc_cr2 | USART_CR2_LBDIE;
+ u->CR3 = config->sc_cr3 | USART_CR3_EIE;
+ u->CR1 = config->sc_cr1 | USART_CR1_UE | USART_CR1_PEIE |
+ USART_CR1_RXNEIE | USART_CR1_TE |
+ USART_CR1_RE;
+ u->ICR = 0xFFFFFFFF;
+}
+
+/**
+ * @brief USART de-initialization.
+ * @details This function must be invoked with interrupts disabled.
+ *
+ * @param[in] u pointer to an USART I/O block
+ */
+static void usart_deinit(USART_TypeDef *u) {
+
+ u->CR1 = 0;
+ u->CR2 = 0;
+ u->CR3 = 0;
+}
+
+/**
+ * @brief Error handling routine.
+ *
+ * @param[in] sdp pointer to a @p SerialDriver object
+ * @param[in] isr USART ISR register value
+ */
+static void set_error(SerialDriver *sdp, uint32_t isr) {
+ flagsmask_t sts = 0;
+
+ if (isr & USART_ISR_ORE)
+ sts |= SD_OVERRUN_ERROR;
+ if (isr & USART_ISR_PE)
+ sts |= SD_PARITY_ERROR;
+ if (isr & USART_ISR_FE)
+ sts |= SD_FRAMING_ERROR;
+ if (isr & USART_ISR_NE)
+ sts |= SD_NOISE_ERROR;
+ chSysLockFromIsr();
+ chnAddFlagsI(sdp, sts);
+ chSysUnlockFromIsr();
+}
+
+/**
+ * @brief Common IRQ handler.
+ *
+ * @param[in] sdp communication channel associated to the USART
+ */
+static void serve_interrupt(SerialDriver *sdp) {
+ USART_TypeDef *u = sdp->usart;
+ uint32_t cr1 = u->CR1;
+ uint32_t isr;
+
+ /* Reading and clearing status.*/
+ isr = u->ISR;
+ u->ICR = isr;
+
+ /* Error condition detection.*/
+ if (isr & (USART_ISR_ORE | USART_ISR_NE | USART_ISR_FE | USART_ISR_PE))
+ set_error(sdp, isr);
+ /* Special case, LIN break detection.*/
+ if (isr & USART_ISR_LBD) {
+ chSysLockFromIsr();
+ chnAddFlagsI(sdp, SD_BREAK_DETECTED);
+ chSysUnlockFromIsr();
+ }
+ /* Data available.*/
+ if (isr & USART_ISR_RXNE) {
+ chSysLockFromIsr();
+ sdIncomingDataI(sdp, (uint8_t)u->RDR);
+ chSysUnlockFromIsr();
+ }
+ /* Transmission buffer empty.*/
+ if ((cr1 & USART_CR1_TXEIE) && (isr & USART_ISR_TXE)) {
+ msg_t b;
+ chSysLockFromIsr();
+ b = chOQGetI(&sdp->oqueue);
+ if (b < Q_OK) {
+ chnAddFlagsI(sdp, CHN_OUTPUT_EMPTY);
+ u->CR1 = (cr1 & ~USART_CR1_TXEIE) | USART_CR1_TCIE;
+ }
+ else
+ u->TDR = b;
+ chSysUnlockFromIsr();
+ }
+ /* Physical transmission end.*/
+ if (isr & USART_ISR_TC) {
+ chSysLockFromIsr();
+ chnAddFlagsI(sdp, CHN_TRANSMISSION_END);
+ chSysUnlockFromIsr();
+ u->CR1 = cr1 & ~USART_CR1_TCIE;
+ }
+}
+
+#if STM32_SERIAL_USE_USART1 || defined(__DOXYGEN__)
+static void notify1(GenericQueue *qp) {
+
+ (void)qp;
+ USART1->CR1 |= USART_CR1_TXEIE;
+}
+#endif
+
+#if STM32_SERIAL_USE_USART2 || defined(__DOXYGEN__)
+static void notify2(GenericQueue *qp) {
+
+ (void)qp;
+ USART2->CR1 |= USART_CR1_TXEIE;
+}
+#endif
+
+#if STM32_SERIAL_USE_USART3 || defined(__DOXYGEN__)
+static void notify3(GenericQueue *qp) {
+
+ (void)qp;
+ USART3->CR1 |= USART_CR1_TXEIE;
+}
+#endif
+
+#if STM32_SERIAL_USE_UART4 || defined(__DOXYGEN__)
+static void notify4(GenericQueue *qp) {
+
+ (void)qp;
+ UART4->CR1 |= USART_CR1_TXEIE;
+}
+#endif
+
+#if STM32_SERIAL_USE_UART5 || defined(__DOXYGEN__)
+static void notify5(GenericQueue *qp) {
+
+ (void)qp;
+ UART5->CR1 |= USART_CR1_TXEIE;
+}
+#endif
+
+#if STM32_SERIAL_USE_USART6 || defined(__DOXYGEN__)
+static void notify6(GenericQueue *qp) {
+
+ (void)qp;
+ USART6->CR1 |= USART_CR1_TXEIE;
+}
+#endif
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+#if STM32_SERIAL_USE_USART1 || defined(__DOXYGEN__)
+#if !defined(STM32_USART1_HANDLER)
+#error "STM32_USART1_HANDLER not defined"
+#endif
+/**
+ * @brief USART1 interrupt handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_USART1_HANDLER) {
+
+ CH_IRQ_PROLOGUE();
+
+ serve_interrupt(&SD1);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif
+
+#if STM32_SERIAL_USE_USART2 || defined(__DOXYGEN__)
+#if !defined(STM32_USART2_HANDLER)
+#error "STM32_USART2_HANDLER not defined"
+#endif
+/**
+ * @brief USART2 interrupt handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_USART2_HANDLER) {
+
+ CH_IRQ_PROLOGUE();
+
+ serve_interrupt(&SD2);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif
+
+#if STM32_SERIAL_USE_USART3 || defined(__DOXYGEN__)
+#if !defined(STM32_USART3_HANDLER)
+#error "STM32_USART3_HANDLER not defined"
+#endif
+/**
+ * @brief USART3 interrupt handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_USART3_HANDLER) {
+
+ CH_IRQ_PROLOGUE();
+
+ serve_interrupt(&SD3);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif
+
+#if STM32_SERIAL_USE_UART4 || defined(__DOXYGEN__)
+#if !defined(STM32_UART4_HANDLER)
+#error "STM32_UART4_HANDLER not defined"
+#endif
+/**
+ * @brief UART4 interrupt handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_UART4_HANDLER) {
+
+ CH_IRQ_PROLOGUE();
+
+ serve_interrupt(&SD4);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif
+
+#if STM32_SERIAL_USE_UART5 || defined(__DOXYGEN__)
+#if !defined(STM32_UART5_HANDLER)
+#error "STM32_UART5_HANDLER not defined"
+#endif
+/**
+ * @brief UART5 interrupt handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_UART5_HANDLER) {
+
+ CH_IRQ_PROLOGUE();
+
+ serve_interrupt(&SD5);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif
+
+#if STM32_SERIAL_USE_USART6 || defined(__DOXYGEN__)
+#if !defined(STM32_USART6_HANDLER)
+#error "STM32_USART6_HANDLER not defined"
+#endif
+/**
+ * @brief USART1 interrupt handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_USART6_HANDLER) {
+
+ CH_IRQ_PROLOGUE();
+
+ serve_interrupt(&SD6);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level serial driver initialization.
+ *
+ * @notapi
+ */
+void sd_lld_init(void) {
+
+#if STM32_SERIAL_USE_USART1
+ sdObjectInit(&SD1, NULL, notify1);
+ SD1.usart = USART1;
+#endif
+
+#if STM32_SERIAL_USE_USART2
+ sdObjectInit(&SD2, NULL, notify2);
+ SD2.usart = USART2;
+#endif
+
+#if STM32_SERIAL_USE_USART3
+ sdObjectInit(&SD3, NULL, notify3);
+ SD3.usart = USART3;
+#endif
+
+#if STM32_SERIAL_USE_UART4
+ sdObjectInit(&SD4, NULL, notify4);
+ SD4.usart = UART4;
+#endif
+
+#if STM32_SERIAL_USE_UART5
+ sdObjectInit(&SD5, NULL, notify5);
+ SD5.usart = UART5;
+#endif
+
+#if STM32_SERIAL_USE_USART6
+ sdObjectInit(&SD6, NULL, notify6);
+ SD6.usart = USART6;
+#endif
+}
+
+/**
+ * @brief Low level serial driver configuration and (re)start.
+ *
+ * @param[in] sdp pointer to a @p SerialDriver object
+ * @param[in] config the architecture-dependent serial driver configuration.
+ * If this parameter is set to @p NULL then a default
+ * configuration is used.
+ *
+ * @notapi
+ */
+void sd_lld_start(SerialDriver *sdp, const SerialConfig *config) {
+
+ if (config == NULL)
+ config = &default_config;
+
+ if (sdp->state == SD_STOP) {
+#if STM32_SERIAL_USE_USART1
+ if (&SD1 == sdp) {
+ rccEnableUSART1(FALSE);
+ nvicEnableVector(STM32_USART1_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_SERIAL_USART1_PRIORITY));
+ }
+#endif
+#if STM32_SERIAL_USE_USART2
+ if (&SD2 == sdp) {
+ rccEnableUSART2(FALSE);
+ nvicEnableVector(STM32_USART2_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_SERIAL_USART2_PRIORITY));
+ }
+#endif
+#if STM32_SERIAL_USE_USART3
+ if (&SD3 == sdp) {
+ rccEnableUSART3(FALSE);
+ nvicEnableVector(STM32_USART3_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_SERIAL_USART3_PRIORITY));
+ }
+#endif
+#if STM32_SERIAL_USE_UART4
+ if (&SD4 == sdp) {
+ rccEnableUART4(FALSE);
+ nvicEnableVector(STM32_UART4_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_SERIAL_UART4_PRIORITY));
+ }
+#endif
+#if STM32_SERIAL_USE_UART5
+ if (&SD5 == sdp) {
+ rccEnableUART5(FALSE);
+ nvicEnableVector(STM32_UART5_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_SERIAL_UART5_PRIORITY));
+ }
+#endif
+#if STM32_SERIAL_USE_USART6
+ if (&SD6 == sdp) {
+ rccEnableUSART6(FALSE);
+ nvicEnableVector(STM32_USART6_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_SERIAL_USART6_PRIORITY));
+ }
+#endif
+ }
+ usart_init(sdp, config);
+}
+
+/**
+ * @brief Low level serial driver stop.
+ * @details De-initializes the USART, stops the associated clock, resets the
+ * interrupt vector.
+ *
+ * @param[in] sdp pointer to a @p SerialDriver object
+ *
+ * @notapi
+ */
+void sd_lld_stop(SerialDriver *sdp) {
+
+ if (sdp->state == SD_READY) {
+ usart_deinit(sdp->usart);
+#if STM32_SERIAL_USE_USART1
+ if (&SD1 == sdp) {
+ rccDisableUSART1(FALSE);
+ nvicDisableVector(STM32_USART1_NUMBER);
+ return;
+ }
+#endif
+#if STM32_SERIAL_USE_USART2
+ if (&SD2 == sdp) {
+ rccDisableUSART2(FALSE);
+ nvicDisableVector(STM32_USART2_NUMBER);
+ return;
+ }
+#endif
+#if STM32_SERIAL_USE_USART3
+ if (&SD3 == sdp) {
+ rccDisableUSART3(FALSE);
+ nvicDisableVector(STM32_USART3_NUMBER);
+ return;
+ }
+#endif
+#if STM32_SERIAL_USE_UART4
+ if (&SD4 == sdp) {
+ rccDisableUART4(FALSE);
+ nvicDisableVector(STM32_UART4_NUMBER);
+ return;
+ }
+#endif
+#if STM32_SERIAL_USE_UART5
+ if (&SD5 == sdp) {
+ rccDisableUART5(FALSE);
+ nvicDisableVector(STM32_UART5_NUMBER);
+ return;
+ }
+#endif
+#if STM32_SERIAL_USE_USART6
+ if (&SD6 == sdp) {
+ rccDisableUSART6(FALSE);
+ nvicDisableVector(STM32_USART6_NUMBER);
+ return;
+ }
+#endif
+ }
+}
+
+#endif /* HAL_USE_SERIAL */
+
+/** @} */
diff --git a/os/hal/platforms/STM32/USARTv2/serial_lld.h b/os/hal/platforms/STM32/USARTv2/serial_lld.h new file mode 100644 index 000000000..d98cb14bd --- /dev/null +++ b/os/hal/platforms/STM32/USARTv2/serial_lld.h @@ -0,0 +1,306 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
+ 2011,2012 Giovanni Di Sirio.
+
+ This file is part of ChibiOS/RT.
+
+ ChibiOS/RT is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ ChibiOS/RT is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/**
+ * @file STM32/serial_lld.h
+ * @brief STM32 low level serial driver header.
+ *
+ * @addtogroup SERIAL
+ * @{
+ */
+
+#ifndef _SERIAL_LLD_H_
+#define _SERIAL_LLD_H_
+
+#if HAL_USE_SERIAL || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @name Configuration options
+ * @{
+ */
+/**
+ * @brief USART1 driver enable switch.
+ * @details If set to @p TRUE the support for USART1 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_SERIAL_USE_USART1) || defined(__DOXYGEN__)
+#define STM32_SERIAL_USE_USART1 FALSE
+#endif
+
+/**
+ * @brief USART2 driver enable switch.
+ * @details If set to @p TRUE the support for USART2 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_SERIAL_USE_USART2) || defined(__DOXYGEN__)
+#define STM32_SERIAL_USE_USART2 FALSE
+#endif
+
+/**
+ * @brief USART3 driver enable switch.
+ * @details If set to @p TRUE the support for USART3 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_SERIAL_USE_USART3) || defined(__DOXYGEN__)
+#define STM32_SERIAL_USE_USART3 FALSE
+#endif
+
+/**
+ * @brief UART4 driver enable switch.
+ * @details If set to @p TRUE the support for UART4 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_SERIAL_USE_UART4) || defined(__DOXYGEN__)
+#define STM32_SERIAL_USE_UART4 FALSE
+#endif
+
+/**
+ * @brief UART5 driver enable switch.
+ * @details If set to @p TRUE the support for UART5 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_SERIAL_USE_UART5) || defined(__DOXYGEN__)
+#define STM32_SERIAL_USE_UART5 FALSE
+#endif
+
+/**
+ * @brief USART6 driver enable switch.
+ * @details If set to @p TRUE the support for USART6 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_SERIAL_USE_USART6) || defined(__DOXYGEN__)
+#define STM32_SERIAL_USE_USART6 FALSE
+#endif
+
+/**
+ * @brief USART1 interrupt priority level setting.
+ */
+#if !defined(STM32_SERIAL_USART1_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_SERIAL_USART1_PRIORITY 12
+#endif
+
+/**
+ * @brief USART2 interrupt priority level setting.
+ */
+#if !defined(STM32_SERIAL_USART2_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_SERIAL_USART2_PRIORITY 12
+#endif
+
+/**
+ * @brief USART3 interrupt priority level setting.
+ */
+#if !defined(STM32_SERIAL_USART3_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_SERIAL_USART3_PRIORITY 12
+#endif
+
+/**
+ * @brief UART4 interrupt priority level setting.
+ */
+#if !defined(STM32_SERIAL_UART4_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_SERIAL_UART4_PRIORITY 12
+#endif
+
+/**
+ * @brief UART5 interrupt priority level setting.
+ */
+#if !defined(STM32_SERIAL_UART5_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_SERIAL_UART5_PRIORITY 12
+#endif
+
+/**
+ * @brief USART6 interrupt priority level setting.
+ */
+#if !defined(STM32_SERIAL_USART6_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_SERIAL_USART6_PRIORITY 12
+#endif
+/** @} */
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+#if STM32_SERIAL_USE_USART1 && !STM32_HAS_USART1
+#error "USART1 not present in the selected device"
+#endif
+
+#if STM32_SERIAL_USE_USART2 && !STM32_HAS_USART2
+#error "USART2 not present in the selected device"
+#endif
+
+#if STM32_SERIAL_USE_USART3 && !STM32_HAS_USART3
+#error "USART3 not present in the selected device"
+#endif
+
+#if STM32_SERIAL_USE_UART4 && !STM32_HAS_UART4
+#error "UART4 not present in the selected device"
+#endif
+
+#if STM32_SERIAL_USE_UART5 && !STM32_HAS_UART5
+#error "UART5 not present in the selected device"
+#endif
+
+#if STM32_SERIAL_USE_USART6 && !STM32_HAS_USART6
+#error "USART6 not present in the selected device"
+#endif
+
+#if !STM32_SERIAL_USE_USART1 && !STM32_SERIAL_USE_USART2 && \
+ !STM32_SERIAL_USE_USART3 && !STM32_SERIAL_USE_UART4 && \
+ !STM32_SERIAL_USE_UART5 && !STM32_SERIAL_USE_USART6
+#error "SERIAL driver activated but no USART/UART peripheral assigned"
+#endif
+
+#if STM32_SERIAL_USE_USART1 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_SERIAL_USART1_PRIORITY)
+#error "Invalid IRQ priority assigned to USART1"
+#endif
+
+#if STM32_SERIAL_USE_USART2 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_SERIAL_USART2_PRIORITY)
+#error "Invalid IRQ priority assigned to USART2"
+#endif
+
+#if STM32_SERIAL_USE_USART3 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_SERIAL_USART3_PRIORITY)
+#error "Invalid IRQ priority assigned to USART3"
+#endif
+
+#if STM32_SERIAL_USE_UART4 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_SERIAL_UART4_PRIORITY)
+#error "Invalid IRQ priority assigned to UART4"
+#endif
+
+#if STM32_SERIAL_USE_UART5 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_SERIAL_UART5_PRIORITY)
+#error "Invalid IRQ priority assigned to UART5"
+#endif
+
+#if STM32_SERIAL_USE_USART6 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_SERIAL_USART6_PRIORITY)
+#error "Invalid IRQ priority assigned to USART6"
+#endif
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief STM32 Serial Driver configuration structure.
+ * @details An instance of this structure must be passed to @p sdStart()
+ * in order to configure and start a serial driver operations.
+ * @note This structure content is architecture dependent, each driver
+ * implementation defines its own version and the custom static
+ * initializers.
+ */
+typedef struct {
+ /**
+ * @brief Bit rate.
+ */
+ uint32_t sc_speed;
+ /**
+ * @brief Initialization value for the CR1 register.
+ */
+ uint16_t sc_cr1;
+ /**
+ * @brief Initialization value for the CR2 register.
+ */
+ uint16_t sc_cr2;
+ /**
+ * @brief Initialization value for the CR3 register.
+ */
+ uint16_t sc_cr3;
+} SerialConfig;
+
+/**
+ * @brief @p SerialDriver specific data.
+ */
+#define _serial_driver_data \
+ _base_asynchronous_channel_data \
+ /* Driver state.*/ \
+ sdstate_t state; \
+ /* Input queue.*/ \
+ InputQueue iqueue; \
+ /* Output queue.*/ \
+ OutputQueue oqueue; \
+ /* Input circular buffer.*/ \
+ uint8_t ib[SERIAL_BUFFERS_SIZE]; \
+ /* Output circular buffer.*/ \
+ uint8_t ob[SERIAL_BUFFERS_SIZE]; \
+ /* End of the mandatory fields.*/ \
+ /* Pointer to the USART registers block.*/ \
+ USART_TypeDef *usart;
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/*
+ * Extra USARTs definitions here (missing from the ST header file).
+ */
+#define USART_CR2_STOP1_BITS (0 << 12) /**< @brief CR2 1 stop bit value.*/
+#define USART_CR2_STOP0P5_BITS (1 << 12) /**< @brief CR2 0.5 stop bit value.*/
+#define USART_CR2_STOP2_BITS (2 << 12) /**< @brief CR2 2 stop bit value.*/
+#define USART_CR2_STOP1P5_BITS (3 << 12) /**< @brief CR2 1.5 stop bit value.*/
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#if STM32_SERIAL_USE_USART1 && !defined(__DOXYGEN__)
+extern SerialDriver SD1;
+#endif
+#if STM32_SERIAL_USE_USART2 && !defined(__DOXYGEN__)
+extern SerialDriver SD2;
+#endif
+#if STM32_SERIAL_USE_USART3 && !defined(__DOXYGEN__)
+extern SerialDriver SD3;
+#endif
+#if STM32_SERIAL_USE_UART4 && !defined(__DOXYGEN__)
+extern SerialDriver SD4;
+#endif
+#if STM32_SERIAL_USE_UART5 && !defined(__DOXYGEN__)
+extern SerialDriver SD5;
+#endif
+#if STM32_SERIAL_USE_USART6 && !defined(__DOXYGEN__)
+extern SerialDriver SD6;
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void sd_lld_init(void);
+ void sd_lld_start(SerialDriver *sdp, const SerialConfig *config);
+ void sd_lld_stop(SerialDriver *sdp);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_SERIAL */
+
+#endif /* _SERIAL_LLD_H_ */
+
+/** @} */
diff --git a/os/hal/platforms/STM32F0xx/platform.mk b/os/hal/platforms/STM32F0xx/platform.mk index 8586a6990..54b05bdbc 100644 --- a/os/hal/platforms/STM32F0xx/platform.mk +++ b/os/hal/platforms/STM32F0xx/platform.mk @@ -7,9 +7,9 @@ PLATFORMSRC = ${CHIBIOS}/os/hal/platforms/STM32F0xx/stm32_dma.c \ ${CHIBIOS}/os/hal/platforms/STM32/gpt_lld.c \
${CHIBIOS}/os/hal/platforms/STM32/icu_lld.c \
${CHIBIOS}/os/hal/platforms/STM32/pwm_lld.c \
- ${CHIBIOS}/os/hal/platforms/STM32/serial_lld.c \
${CHIBIOS}/os/hal/platforms/STM32/spi_lld.c \
${CHIBIOS}/os/hal/platforms/STM32/GPIOv2/pal_lld.c \
+ ${CHIBIOS}/os/hal/platforms/STM32/USARTv2/serial_lld.c \
${CHIBIOS}/os/hal/platforms/STM32/USARTv2/uart_lld.c
# Required include directories
diff --git a/os/hal/platforms/STM32F1xx/platform.mk b/os/hal/platforms/STM32F1xx/platform.mk index 80b65fd9a..7e3fc6c1a 100644 --- a/os/hal/platforms/STM32F1xx/platform.mk +++ b/os/hal/platforms/STM32F1xx/platform.mk @@ -9,12 +9,12 @@ PLATFORMSRC = ${CHIBIOS}/os/hal/platforms/STM32F1xx/stm32_dma.c \ ${CHIBIOS}/os/hal/platforms/STM32/icu_lld.c \
${CHIBIOS}/os/hal/platforms/STM32/mac_lld.c \
${CHIBIOS}/os/hal/platforms/STM32/pwm_lld.c \
- ${CHIBIOS}/os/hal/platforms/STM32/serial_lld.c \
${CHIBIOS}/os/hal/platforms/STM32/sdc_lld.c \
${CHIBIOS}/os/hal/platforms/STM32/spi_lld.c \
${CHIBIOS}/os/hal/platforms/STM32/GPIOv1/pal_lld.c \
${CHIBIOS}/os/hal/platforms/STM32/I2Cv1/i2c_lld.c \
${CHIBIOS}/os/hal/platforms/STM32/RTCv1/rtc_lld.c \
+ ${CHIBIOS}/os/hal/platforms/STM32/USARTv1/serial_lld.c \
${CHIBIOS}/os/hal/platforms/STM32/USARTv1/uart_lld.c \
${CHIBIOS}/os/hal/platforms/STM32/USBv1/usb_lld.c
diff --git a/os/hal/platforms/STM32F3xx/platform.mk b/os/hal/platforms/STM32F3xx/platform.mk index 77418721a..0dc6f1892 100644 --- a/os/hal/platforms/STM32F3xx/platform.mk +++ b/os/hal/platforms/STM32F3xx/platform.mk @@ -1,7 +1,7 @@ # List of all the STM32F3xx platform files.
PLATFORMSRC = ${CHIBIOS}/os/hal/platforms/STM32F3xx/hal_lld.c \
- ${CHIBIOS}/os/hal/platforms/STM32/serial_lld.c \
- ${CHIBIOS}/os/hal/platforms/STM32/GPIOv2/pal_lld.c
+ ${CHIBIOS}/os/hal/platforms/STM32/GPIOv2/pal_lld.c \
+ ${CHIBIOS}/os/hal/platforms/STM32/USARTv2/serial_lld.c
# Required include directories
PLATFORMINC = ${CHIBIOS}/os/hal/platforms/STM32F3xx \
diff --git a/os/hal/platforms/STM32F4xx/platform.mk b/os/hal/platforms/STM32F4xx/platform.mk index e39dbda59..2c64a4a17 100644 --- a/os/hal/platforms/STM32F4xx/platform.mk +++ b/os/hal/platforms/STM32F4xx/platform.mk @@ -10,12 +10,12 @@ PLATFORMSRC = ${CHIBIOS}/os/hal/platforms/STM32F4xx/stm32_dma.c \ ${CHIBIOS}/os/hal/platforms/STM32/mac_lld.c \
${CHIBIOS}/os/hal/platforms/STM32/pwm_lld.c \
${CHIBIOS}/os/hal/platforms/STM32/sdc_lld.c \
- ${CHIBIOS}/os/hal/platforms/STM32/serial_lld.c \
${CHIBIOS}/os/hal/platforms/STM32/spi_lld.c \
${CHIBIOS}/os/hal/platforms/STM32/GPIOv2/pal_lld.c \
${CHIBIOS}/os/hal/platforms/STM32/I2Cv1/i2c_lld.c \
${CHIBIOS}/os/hal/platforms/STM32/OTGv1/usb_lld.c \
${CHIBIOS}/os/hal/platforms/STM32/RTCv2/rtc_lld.c \
+ ${CHIBIOS}/os/hal/platforms/STM32/USARTv1/serial_lld.c \
${CHIBIOS}/os/hal/platforms/STM32/USARTv1/uart_lld.c
# Required include directories
diff --git a/os/hal/platforms/STM32L1xx/platform.mk b/os/hal/platforms/STM32L1xx/platform.mk index f54f5fec3..ea5166a0f 100644 --- a/os/hal/platforms/STM32L1xx/platform.mk +++ b/os/hal/platforms/STM32L1xx/platform.mk @@ -7,10 +7,10 @@ PLATFORMSRC = ${CHIBIOS}/os/hal/platforms/STM32L1xx/stm32_dma.c \ ${CHIBIOS}/os/hal/platforms/STM32/gpt_lld.c \
${CHIBIOS}/os/hal/platforms/STM32/icu_lld.c \
${CHIBIOS}/os/hal/platforms/STM32/pwm_lld.c \
- ${CHIBIOS}/os/hal/platforms/STM32/serial_lld.c \
${CHIBIOS}/os/hal/platforms/STM32/spi_lld.c \
${CHIBIOS}/os/hal/platforms/STM32/GPIOv2/pal_lld.c \
${CHIBIOS}/os/hal/platforms/STM32/I2Cv1/i2c_lld.c \
+ ${CHIBIOS}/os/hal/platforms/STM32/USARTv1/serial_lld.c \
${CHIBIOS}/os/hal/platforms/STM32/USARTv1/uart_lld.c \
${CHIBIOS}/os/hal/platforms/STM32/USBv1/usb_lld.c
|