aboutsummaryrefslogtreecommitdiffstats
path: root/os/hal/templates/usb_lld.h
diff options
context:
space:
mode:
Diffstat (limited to 'os/hal/templates/usb_lld.h')
-rw-r--r--os/hal/templates/usb_lld.h365
1 files changed, 365 insertions, 0 deletions
diff --git a/os/hal/templates/usb_lld.h b/os/hal/templates/usb_lld.h
new file mode 100644
index 000000000..7dbf8b4b9
--- /dev/null
+++ b/os/hal/templates/usb_lld.h
@@ -0,0 +1,365 @@
+/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/usb_lld.h
+ * @brief USB Driver subsystem low level driver header template.
+ *
+ * @addtogroup USB
+ * @{
+ */
+
+#ifndef _USB_LLD_H_
+#define _USB_LLD_H_
+
+#if HAL_USE_USB || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/**
+ * @brief Maximum endpoint address.
+ */
+#define USB_MAX_ENDPOINTS 4
+
+/**
+ * @brief The address can be changed immediately upon packet reception.
+ */
+#define USB_SET_ADDRESS_MODE USB_EARLY_SET_ADDRESS
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @name Configuration options
+ * @{
+ */
+/**
+ * @brief USB driver enable switch.
+ * @details If set to @p TRUE the support for USB1 is included.
+ */
+#if !defined(PLATFORM_USB_USE_USB1) || defined(__DOXYGEN__)
+#define PLATFORM_USB_USE_USB1 FALSE
+#endif
+/** @} */
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief Type of an IN endpoint state structure.
+ */
+typedef struct {
+ /**
+ * @brief Buffer mode, queue or linear.
+ */
+ bool_t txqueued;
+ /**
+ * @brief Requested transmit transfer size.
+ */
+ size_t txsize;
+ /**
+ * @brief Transmitted bytes so far.
+ */
+ size_t txcnt;
+ union {
+ struct {
+ /**
+ * @brief Pointer to the transmission linear buffer.
+ */
+ const uint8_t *txbuf;
+ } linear;
+ struct {
+ /**
+ * @brief Pointer to the output queue.
+ */
+ OutputQueue *txqueue;
+ } queue;
+ } mode;
+} USBInEndpointState;
+
+/**
+ * @brief Type of an OUT endpoint state structure.
+ */
+typedef struct {
+ /**
+ * @brief Buffer mode, queue or linear.
+ */
+ bool_t rxqueued;
+ /**
+ * @brief Requested receive transfer size.
+ */
+ size_t rxsize;
+ /**
+ * @brief Received bytes so far.
+ */
+ size_t rxcnt;
+ union {
+ struct {
+ /**
+ * @brief Pointer to the receive linear buffer.
+ */
+ uint8_t *rxbuf;
+ } linear;
+ struct {
+ /**
+ * @brief Pointer to the input queue.
+ */
+ InputQueue *rxqueue;
+ } queue;
+ } mode;
+} USBOutEndpointState;
+
+/**
+ * @brief Type of an USB endpoint configuration structure.
+ * @note Platform specific restrictions may apply to endpoints.
+ */
+typedef struct {
+ /**
+ * @brief Type and mode of the endpoint.
+ */
+ uint32_t ep_mode;
+ /**
+ * @brief Setup packet notification callback.
+ * @details This callback is invoked when a setup packet has been
+ * received.
+ * @post The application must immediately call @p usbReadPacket() in
+ * order to access the received packet.
+ * @note This field is only valid for @p USB_EP_MODE_TYPE_CTRL
+ * endpoints, it should be set to @p NULL for other endpoint
+ * types.
+ */
+ usbepcallback_t setup_cb;
+ /**
+ * @brief IN endpoint notification callback.
+ * @details This field must be set to @p NULL if the IN endpoint is not
+ * used.
+ */
+ usbepcallback_t in_cb;
+ /**
+ * @brief OUT endpoint notification callback.
+ * @details This field must be set to @p NULL if the OUT endpoint is not
+ * used.
+ */
+ usbepcallback_t out_cb;
+ /**
+ * @brief IN endpoint maximum packet size.
+ * @details This field must be set to zero if the IN endpoint is not
+ * used.
+ */
+ uint16_t in_maxsize;
+ /**
+ * @brief OUT endpoint maximum packet size.
+ * @details This field must be set to zero if the OUT endpoint is not
+ * used.
+ */
+ uint16_t out_maxsize;
+ /**
+ * @brief @p USBEndpointState associated to the IN endpoint.
+ * @details This structure maintains the state of the IN endpoint.
+ */
+ USBInEndpointState *in_state;
+ /**
+ * @brief @p USBEndpointState associated to the OUT endpoint.
+ * @details This structure maintains the state of the OUT endpoint.
+ */
+ USBOutEndpointState *out_state;
+ /* End of the mandatory fields.*/
+} USBEndpointConfig;
+
+/**
+ * @brief Type of an USB driver configuration structure.
+ */
+typedef struct {
+ /**
+ * @brief USB events callback.
+ * @details This callback is invoked when an USB driver event is registered.
+ */
+ usbeventcb_t event_cb;
+ /**
+ * @brief Device GET_DESCRIPTOR request callback.
+ * @note This callback is mandatory and cannot be set to @p NULL.
+ */
+ usbgetdescriptor_t get_descriptor_cb;
+ /**
+ * @brief Requests hook callback.
+ * @details This hook allows to be notified of standard requests or to
+ * handle non standard requests.
+ */
+ usbreqhandler_t requests_hook_cb;
+ /**
+ * @brief Start Of Frame callback.
+ */
+ usbcallback_t sof_cb;
+ /* End of the mandatory fields.*/
+} USBConfig;
+
+/**
+ * @brief Structure representing an USB driver.
+ */
+struct USBDriver {
+ /**
+ * @brief Driver state.
+ */
+ usbstate_t state;
+ /**
+ * @brief Current configuration data.
+ */
+ const USBConfig *config;
+ /**
+ * @brief Bit map of the transmitting IN endpoints.
+ */
+ uint16_t transmitting;
+ /**
+ * @brief Bit map of the receiving OUT endpoints.
+ */
+ uint16_t receiving;
+ /**
+ * @brief Active endpoints configurations.
+ */
+ const USBEndpointConfig *epc[USB_MAX_ENDPOINTS + 1];
+ /**
+ * @brief Fields available to user, it can be used to associate an
+ * application-defined handler to an IN endpoint.
+ * @note The base index is one, the endpoint zero does not have a
+ * reserved element in this array.
+ */
+ void *in_params[USB_MAX_ENDPOINTS];
+ /**
+ * @brief Fields available to user, it can be used to associate an
+ * application-defined handler to an OUT endpoint.
+ * @note The base index is one, the endpoint zero does not have a
+ * reserved element in this array.
+ */
+ void *out_params[USB_MAX_ENDPOINTS];
+ /**
+ * @brief Endpoint 0 state.
+ */
+ usbep0state_t ep0state;
+ /**
+ * @brief Next position in the buffer to be transferred through endpoint 0.
+ */
+ uint8_t *ep0next;
+ /**
+ * @brief Number of bytes yet to be transferred through endpoint 0.
+ */
+ size_t ep0n;
+ /**
+ * @brief Endpoint 0 end transaction callback.
+ */
+ usbcallback_t ep0endcb;
+ /**
+ * @brief Setup packet buffer.
+ */
+ uint8_t setup[8];
+ /**
+ * @brief Current USB device status.
+ */
+ uint16_t status;
+ /**
+ * @brief Assigned USB address.
+ */
+ uint8_t address;
+ /**
+ * @brief Current USB device configuration.
+ */
+ uint8_t configuration;
+#if defined(USB_DRIVER_EXT_FIELDS)
+ USB_DRIVER_EXT_FIELDS
+#endif
+ /* End of the mandatory fields.*/
+};
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/**
+ * @brief Returns the exact size of a receive transaction.
+ * @details The received size can be different from the size specified in
+ * @p usbStartReceiveI() because the last packet could have a size
+ * different from the expected one.
+ * @pre The OUT endpoint must have been configured in transaction mode
+ * in order to use this function.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ * @param[in] ep endpoint number
+ * @return Received data size.
+ *
+ * @notapi
+ */
+#define usb_lld_get_transaction_size(usbp, ep) \
+ ((usbp)->epc[ep]->out_state->rxcnt)
+
+/**
+ * @brief Connects the USB device.
+ *
+ * @api
+ */
+#define usb_lld_connect_bus(usbp)
+
+/**
+ * @brief Disconnect the USB device.
+ *
+ * @api
+ */
+#define usb_lld_disconnect_bus(usbp)
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#if PLATFORM_USB_USE_USB1 && !defined(__DOXYGEN__)
+extern USBDriver USBD1;
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void usb_lld_init(void);
+ void usb_lld_start(USBDriver *usbp);
+ void usb_lld_stop(USBDriver *usbp);
+ void usb_lld_reset(USBDriver *usbp);
+ void usb_lld_set_address(USBDriver *usbp);
+ void usb_lld_init_endpoint(USBDriver *usbp, usbep_t ep);
+ void usb_lld_disable_endpoints(USBDriver *usbp);
+ usbepstatus_t usb_lld_get_status_in(USBDriver *usbp, usbep_t ep);
+ usbepstatus_t usb_lld_get_status_out(USBDriver *usbp, usbep_t ep);
+ void usb_lld_read_setup(USBDriver *usbp, usbep_t ep, uint8_t *buf);
+ void usb_lld_prepare_receive(USBDriver *usbp, usbep_t ep);
+ void usb_lld_prepare_transmit(USBDriver *usbp, usbep_t ep);
+ void usb_lld_start_out(USBDriver *usbp, usbep_t ep);
+ void usb_lld_start_in(USBDriver *usbp, usbep_t ep);
+ void usb_lld_stall_out(USBDriver *usbp, usbep_t ep);
+ void usb_lld_stall_in(USBDriver *usbp, usbep_t ep);
+ void usb_lld_clear_out(USBDriver *usbp, usbep_t ep);
+ void usb_lld_clear_in(USBDriver *usbp, usbep_t ep);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_USB */
+
+#endif /* _USB_LLD_H_ */
+
+/** @} */