diff options
Diffstat (limited to 'os/hal/ports/STM32/STM32F4xx/adc_lld.c')
| -rw-r--r-- | os/hal/ports/STM32/STM32F4xx/adc_lld.c | 418 |
1 files changed, 418 insertions, 0 deletions
diff --git a/os/hal/ports/STM32/STM32F4xx/adc_lld.c b/os/hal/ports/STM32/STM32F4xx/adc_lld.c new file mode 100644 index 000000000..85cb485bc --- /dev/null +++ b/os/hal/ports/STM32/STM32F4xx/adc_lld.c @@ -0,0 +1,418 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32F4xx/adc_lld.c
+ * @brief STM32F4xx/STM32F2xx ADC subsystem low level driver source.
+ *
+ * @addtogroup ADC
+ * @{
+ */
+
+#include "hal.h"
+
+#if HAL_USE_ADC || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+#define ADC1_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_ADC_ADC1_DMA_STREAM, STM32_ADC1_DMA_CHN)
+
+#define ADC2_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_ADC_ADC2_DMA_STREAM, STM32_ADC2_DMA_CHN)
+
+#define ADC3_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_ADC_ADC3_DMA_STREAM, STM32_ADC3_DMA_CHN)
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/** @brief ADC1 driver identifier.*/
+#if STM32_ADC_USE_ADC1 || defined(__DOXYGEN__)
+ADCDriver ADCD1;
+#endif
+
+/** @brief ADC2 driver identifier.*/
+#if STM32_ADC_USE_ADC2 || defined(__DOXYGEN__)
+ADCDriver ADCD2;
+#endif
+
+/** @brief ADC3 driver identifier.*/
+#if STM32_ADC_USE_ADC3 || defined(__DOXYGEN__)
+ADCDriver ADCD3;
+#endif
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/**
+ * @brief ADC DMA ISR service routine.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ * @param[in] flags pre-shifted content of the ISR register
+ */
+static void adc_lld_serve_rx_interrupt(ADCDriver *adcp, uint32_t flags) {
+
+ /* DMA errors handling.*/
+ if ((flags & (STM32_DMA_ISR_TEIF | STM32_DMA_ISR_DMEIF)) != 0) {
+ /* DMA, this could help only if the DMA tries to access an unmapped
+ address space or violates alignment rules.*/
+ _adc_isr_error_code(adcp, ADC_ERR_DMAFAILURE);
+ }
+ else {
+ /* It is possible that the conversion group has already be reset by the
+ ADC error handler, in this case this interrupt is spurious.*/
+ if (adcp->grpp != NULL) {
+ if ((flags & STM32_DMA_ISR_TCIF) != 0) {
+ /* Transfer complete processing.*/
+ _adc_isr_full_code(adcp);
+ }
+ else if ((flags & STM32_DMA_ISR_HTIF) != 0) {
+ /* Half transfer processing.*/
+ _adc_isr_half_code(adcp);
+ }
+ }
+ }
+}
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+#if STM32_ADC_USE_ADC1 || STM32_ADC_USE_ADC2 || STM32_ADC_USE_ADC3 || \
+ defined(__DOXYGEN__)
+/**
+ * @brief ADC interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(ADC1_2_3_IRQHandler) {
+ uint32_t sr;
+
+ OSAL_IRQ_PROLOGUE();
+
+#if STM32_ADC_USE_ADC1
+ sr = ADC1->SR;
+ ADC1->SR = 0;
+ /* Note, an overflow may occur after the conversion ended before the driver
+ is able to stop the ADC, this is why the DMA channel is checked too.*/
+ if ((sr & ADC_SR_OVR) && (dmaStreamGetTransactionSize(ADCD1.dmastp) > 0)) {
+ /* ADC overflow condition, this could happen only if the DMA is unable
+ to read data fast enough.*/
+ if (ADCD1.grpp != NULL)
+ _adc_isr_error_code(&ADCD1, ADC_ERR_OVERFLOW);
+ }
+ /* TODO: Add here analog watchdog handling.*/
+#endif /* STM32_ADC_USE_ADC1 */
+
+#if STM32_ADC_USE_ADC2
+ sr = ADC2->SR;
+ ADC2->SR = 0;
+ /* Note, an overflow may occur after the conversion ended before the driver
+ is able to stop the ADC, this is why the DMA channel is checked too.*/
+ if ((sr & ADC_SR_OVR) && (dmaStreamGetTransactionSize(ADCD2.dmastp) > 0)) {
+ /* ADC overflow condition, this could happen only if the DMA is unable
+ to read data fast enough.*/
+ if (ADCD2.grpp != NULL)
+ _adc_isr_error_code(&ADCD2, ADC_ERR_OVERFLOW);
+ }
+ /* TODO: Add here analog watchdog handling.*/
+#endif /* STM32_ADC_USE_ADC2 */
+
+#if STM32_ADC_USE_ADC3
+ sr = ADC3->SR;
+ ADC3->SR = 0;
+ /* Note, an overflow may occur after the conversion ended before the driver
+ is able to stop the ADC, this is why the DMA channel is checked too.*/
+ if ((sr & ADC_SR_OVR) && (dmaStreamGetTransactionSize(ADCD3.dmastp) > 0)) {
+ /* ADC overflow condition, this could happen only if the DMA is unable
+ to read data fast enough.*/
+ if (ADCD3.grpp != NULL)
+ _adc_isr_error_code(&ADCD3, ADC_ERR_OVERFLOW);
+ }
+ /* TODO: Add here analog watchdog handling.*/
+#endif /* STM32_ADC_USE_ADC3 */
+
+ CH_IRQ_EPILOGUE();
+}
+#endif
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level ADC driver initialization.
+ *
+ * @notapi
+ */
+void adc_lld_init(void) {
+
+#if STM32_ADC_USE_ADC1
+ /* Driver initialization.*/
+ adcObjectInit(&ADCD1);
+ ADCD1.adc = ADC1;
+ ADCD1.dmastp = STM32_DMA_STREAM(STM32_ADC_ADC1_DMA_STREAM);
+ ADCD1.dmamode = STM32_DMA_CR_CHSEL(ADC1_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_ADC_ADC1_DMA_PRIORITY) |
+ STM32_DMA_CR_DIR_P2M |
+ STM32_DMA_CR_MSIZE_HWORD | STM32_DMA_CR_PSIZE_HWORD |
+ STM32_DMA_CR_MINC | STM32_DMA_CR_TCIE |
+ STM32_DMA_CR_DMEIE | STM32_DMA_CR_TEIE;
+#endif
+
+#if STM32_ADC_USE_ADC2
+ /* Driver initialization.*/
+ adcObjectInit(&ADCD2);
+ ADCD2.adc = ADC2;
+ ADCD2.dmastp = STM32_DMA_STREAM(STM32_ADC_ADC2_DMA_STREAM);
+ ADCD2.dmamode = STM32_DMA_CR_CHSEL(ADC2_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_ADC_ADC2_DMA_PRIORITY) |
+ STM32_DMA_CR_DIR_P2M |
+ STM32_DMA_CR_MSIZE_HWORD | STM32_DMA_CR_PSIZE_HWORD |
+ STM32_DMA_CR_MINC | STM32_DMA_CR_TCIE |
+ STM32_DMA_CR_DMEIE | STM32_DMA_CR_TEIE;
+#endif
+
+#if STM32_ADC_USE_ADC3
+ /* Driver initialization.*/
+ adcObjectInit(&ADCD3);
+ ADCD3.adc = ADC3;
+ ADCD3.dmastp = STM32_DMA_STREAM(STM32_ADC_ADC3_DMA_STREAM);
+ ADCD3.dmamode = STM32_DMA_CR_CHSEL(ADC3_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_ADC_ADC3_DMA_PRIORITY) |
+ STM32_DMA_CR_DIR_P2M |
+ STM32_DMA_CR_MSIZE_HWORD | STM32_DMA_CR_PSIZE_HWORD |
+ STM32_DMA_CR_MINC | STM32_DMA_CR_TCIE |
+ STM32_DMA_CR_DMEIE | STM32_DMA_CR_TEIE;
+#endif
+
+ /* The shared vector is initialized on driver initialization and never
+ disabled.*/
+ nvicEnableVector(ADC_IRQn, STM32_ADC_IRQ_PRIORITY);
+}
+
+/**
+ * @brief Configures and activates the ADC peripheral.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ *
+ * @notapi
+ */
+void adc_lld_start(ADCDriver *adcp) {
+
+ /* If in stopped state then enables the ADC and DMA clocks.*/
+ if (adcp->state == ADC_STOP) {
+#if STM32_ADC_USE_ADC1
+ if (&ADCD1 == adcp) {
+ bool b;
+ b = dmaStreamAllocate(adcp->dmastp,
+ STM32_ADC_ADC1_DMA_IRQ_PRIORITY,
+ (stm32_dmaisr_t)adc_lld_serve_rx_interrupt,
+ (void *)adcp);
+ osalDbgAssert(!b, "stream already allocated");
+ dmaStreamSetPeripheral(adcp->dmastp, &ADC1->DR);
+ rccEnableADC1(FALSE);
+ }
+#endif /* STM32_ADC_USE_ADC1 */
+
+#if STM32_ADC_USE_ADC2
+ if (&ADCD2 == adcp) {
+ bool b;
+ b = dmaStreamAllocate(adcp->dmastp,
+ STM32_ADC_ADC2_DMA_IRQ_PRIORITY,
+ (stm32_dmaisr_t)adc_lld_serve_rx_interrupt,
+ (void *)adcp);
+ osalDbgAssert(!b, "stream already allocated");
+ dmaStreamSetPeripheral(adcp->dmastp, &ADC2->DR);
+ rccEnableADC2(FALSE);
+ }
+#endif /* STM32_ADC_USE_ADC2 */
+
+#if STM32_ADC_USE_ADC3
+ if (&ADCD3 == adcp) {
+ bool b;
+ b = dmaStreamAllocate(adcp->dmastp,
+ STM32_ADC_ADC3_DMA_IRQ_PRIORITY,
+ (stm32_dmaisr_t)adc_lld_serve_rx_interrupt,
+ (void *)adcp);
+ osalDbgAssert(!b, "stream already allocated");
+ dmaStreamSetPeripheral(adcp->dmastp, &ADC3->DR);
+ rccEnableADC3(FALSE);
+ }
+#endif /* STM32_ADC_USE_ADC3 */
+
+ /* This is a common register but apparently it requires that at least one
+ of the ADCs is clocked in order to allow writing, see bug 3575297.*/
+ ADC->CCR = (ADC->CCR & (ADC_CCR_TSVREFE | ADC_CCR_VBATE)) |
+ (STM32_ADC_ADCPRE << 16);
+
+ /* ADC initial setup, starting the analog part here in order to reduce
+ the latency when starting a conversion.*/
+ adcp->adc->CR1 = 0;
+ adcp->adc->CR2 = 0;
+ adcp->adc->CR2 = ADC_CR2_ADON;
+ }
+}
+
+/**
+ * @brief Deactivates the ADC peripheral.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ *
+ * @notapi
+ */
+void adc_lld_stop(ADCDriver *adcp) {
+
+ /* If in ready state then disables the ADC clock.*/
+ if (adcp->state == ADC_READY) {
+ dmaStreamRelease(adcp->dmastp);
+ adcp->adc->CR1 = 0;
+ adcp->adc->CR2 = 0;
+
+#if STM32_ADC_USE_ADC1
+ if (&ADCD1 == adcp)
+ rccDisableADC1(FALSE);
+#endif
+
+#if STM32_ADC_USE_ADC2
+ if (&ADCD2 == adcp)
+ rccDisableADC2(FALSE);
+#endif
+
+#if STM32_ADC_USE_ADC3
+ if (&ADCD3 == adcp)
+ rccDisableADC3(FALSE);
+#endif
+ }
+}
+
+/**
+ * @brief Starts an ADC conversion.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ *
+ * @notapi
+ */
+void adc_lld_start_conversion(ADCDriver *adcp) {
+ uint32_t mode;
+ const ADCConversionGroup *grpp = adcp->grpp;
+
+ /* DMA setup.*/
+ mode = adcp->dmamode;
+ if (grpp->circular) {
+ mode |= STM32_DMA_CR_CIRC;
+ if (adcp->depth > 1) {
+ /* If circular buffer depth > 1, then the half transfer interrupt
+ is enabled in order to allow streaming processing.*/
+ mode |= STM32_DMA_CR_HTIE;
+ }
+ }
+ dmaStreamSetMemory0(adcp->dmastp, adcp->samples);
+ dmaStreamSetTransactionSize(adcp->dmastp, (uint32_t)grpp->num_channels *
+ (uint32_t)adcp->depth);
+ dmaStreamSetMode(adcp->dmastp, mode);
+ dmaStreamEnable(adcp->dmastp);
+
+ /* ADC setup.*/
+ adcp->adc->SR = 0;
+ adcp->adc->SMPR1 = grpp->smpr1;
+ adcp->adc->SMPR2 = grpp->smpr2;
+ adcp->adc->SQR1 = grpp->sqr1;
+ adcp->adc->SQR2 = grpp->sqr2;
+ adcp->adc->SQR3 = grpp->sqr3;
+
+ /* ADC configuration and start, the start is performed using the method
+ specified in the CR2 configuration, usually ADC_CR2_SWSTART.*/
+ adcp->adc->CR1 = grpp->cr1 | ADC_CR1_OVRIE | ADC_CR1_SCAN;
+ if ((grpp->cr2 & ADC_CR2_SWSTART) != 0)
+ adcp->adc->CR2 = grpp->cr2 | ADC_CR2_CONT | ADC_CR2_DMA |
+ ADC_CR2_DDS | ADC_CR2_ADON;
+ else
+ adcp->adc->CR2 = grpp->cr2 | ADC_CR2_DMA |
+ ADC_CR2_DDS | ADC_CR2_ADON;
+}
+
+/**
+ * @brief Stops an ongoing conversion.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ *
+ * @notapi
+ */
+void adc_lld_stop_conversion(ADCDriver *adcp) {
+
+ dmaStreamDisable(adcp->dmastp);
+ adcp->adc->CR1 = 0;
+ adcp->adc->CR2 = 0;
+ adcp->adc->CR2 = ADC_CR2_ADON;
+}
+
+/**
+ * @brief Enables the TSVREFE bit.
+ * @details The TSVREFE bit is required in order to sample the internal
+ * temperature sensor and internal reference voltage.
+ * @note This is an STM32-only functionality.
+ */
+void adcSTM32EnableTSVREFE(void) {
+
+ ADC->CCR |= ADC_CCR_TSVREFE;
+}
+
+/**
+ * @brief Disables the TSVREFE bit.
+ * @details The TSVREFE bit is required in order to sample the internal
+ * temperature sensor and internal reference voltage.
+ * @note This is an STM32-only functionality.
+ */
+void adcSTM32DisableTSVREFE(void) {
+
+ ADC->CCR &= ~ADC_CCR_TSVREFE;
+}
+
+/**
+ * @brief Enables the VBATE bit.
+ * @details The VBATE bit is required in order to sample the VBAT channel.
+ * @note This is an STM32-only functionality.
+ * @note This function is meant to be called after @p adcStart().
+ */
+void adcSTM32EnableVBATE(void) {
+
+ ADC->CCR |= ADC_CCR_VBATE;
+}
+
+/**
+ * @brief Disables the VBATE bit.
+ * @details The VBATE bit is required in order to sample the VBAT channel.
+ * @note This is an STM32-only functionality.
+ * @note This function is meant to be called after @p adcStart().
+ */
+void adcSTM32DisableVBATE(void) {
+
+ ADC->CCR &= ~ADC_CCR_VBATE;
+}
+
+#endif /* HAL_USE_ADC */
+
+/** @} */
|