diff options
Diffstat (limited to 'os/hal/ports/STM32/LLD')
| -rw-r--r-- | os/hal/ports/STM32/LLD/ADCv1/hal_adc_lld.h | 190 | ||||
| -rw-r--r-- | os/hal/ports/STM32/LLD/ADCv2/hal_adc_lld.h | 219 | ||||
| -rw-r--r-- | os/hal/ports/STM32/LLD/ADCv3/hal_adc_lld.h | 266 |
3 files changed, 201 insertions, 474 deletions
diff --git a/os/hal/ports/STM32/LLD/ADCv1/hal_adc_lld.h b/os/hal/ports/STM32/LLD/ADCv1/hal_adc_lld.h index 2da8b80d8..ec33dd626 100644 --- a/os/hal/ports/STM32/LLD/ADCv1/hal_adc_lld.h +++ b/os/hal/ports/STM32/LLD/ADCv1/hal_adc_lld.h @@ -255,154 +255,70 @@ typedef enum { ADC_ERR_AWD = 2 /**< Analog watchdog triggered. */
} adcerror_t;
-/**
- * @brief Type of a structure representing an ADC driver.
- */
-typedef struct ADCDriver ADCDriver;
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
/**
- * @brief ADC notification callback type.
- *
- * @param[in] adcp pointer to the @p ADCDriver object triggering the
- * callback
- * @param[in] buffer pointer to the most recent samples data
- * @param[in] n number of buffer rows available starting from @p buffer
+ * @brief Low level fields of the ADC driver structure.
*/
-typedef void (*adccallback_t)(ADCDriver *adcp, adcsample_t *buffer, size_t n);
+#define adc_lld_driver_fields \
+ /* Pointer to the ADCx registers block.*/ \
+ ADC_TypeDef *adc; \
+ /* Pointer to associated DMA channel.*/ \
+ const stm32_dma_stream_t *dmastp; \
+ /* DMA mode bit mask.*/ \
+ uint32_t dmamode
/**
- * @brief ADC error callback type.
- *
- * @param[in] adcp pointer to the @p ADCDriver object triggering the
- * callback
- * @param[in] err ADC error code
+ * @brief Low level fields of the ADC configuration structure.
*/
-typedef void (*adcerrorcallback_t)(ADCDriver *adcp, adcerror_t err);
+#define adc_lld_config_fields \
+ /* Dummy configuration, it is not needed.*/ \
+ uint32_t dummy
/**
- * @brief Conversion group configuration structure.
- * @details This implementation-dependent structure describes a conversion
- * operation.
- * @note The use of this configuration structure requires knowledge of
- * STM32 ADC cell registers interface, please refer to the STM32
- * reference manual for details.
+ * @brief Low level fields of the ADC configuration structure.
*/
-typedef struct {
- /**
- * @brief Enables the circular buffer mode for the group.
- */
- bool circular;
- /**
- * @brief Number of the analog channels belonging to the conversion group.
- */
- adc_channels_num_t num_channels;
- /**
- * @brief Callback function associated to the group or @p NULL.
- */
- adccallback_t end_cb;
- /**
- * @brief Error callback or @p NULL.
- */
- adcerrorcallback_t error_cb;
- /* End of the mandatory fields.*/
- /**
- * @brief ADC CFGR1 register initialization data.
- * @note The bits DMAEN and DMACFG are enforced internally
- * to the driver, keep them to zero.
- * @note The bits @p ADC_CFGR1_CONT or @p ADC_CFGR1_DISCEN must be
- * specified in continuous more or if the buffer depth is
- * greater than one.
- */
- uint32_t cfgr1;
#if (STM32_ADC_SUPPORTS_OVERSAMPLING == TRUE) || defined(__DOXYGEN__)
- /**
- * @brief ADC CFGR2 register initialization data.
- * @note CKMODE bits must not be specified in this field and left to
- * zero.
- */
- uint32_t cfgr2;
-#endif
- /**
- * @brief ADC TR register initialization data.
- */
- uint32_t tr;
- /**
- * @brief ADC SMPR register initialization data.
- */
- uint32_t smpr;
- /**
- * @brief ADC CHSELR register initialization data.
- * @details The number of bits at logic level one in this register must
- * be equal to the number in the @p num_channels field.
- */
- uint32_t chselr;
-} ADCConversionGroup;
-
-/**
- * @brief Driver configuration structure.
- * @note It could be empty on some architectures.
- */
-typedef struct {
- uint32_t dummy;
-} ADCConfig;
-
-/**
- * @brief Structure representing an ADC driver.
- */
-struct ADCDriver {
- /**
- * @brief Driver state.
- */
- adcstate_t state;
- /**
- * @brief Current configuration data.
- */
- const ADCConfig *config;
- /**
- * @brief Current samples buffer pointer or @p NULL.
- */
- adcsample_t *samples;
- /**
- * @brief Current samples buffer depth or @p 0.
- */
- size_t depth;
- /**
- * @brief Current conversion group pointer or @p NULL.
- */
- const ADCConversionGroup *grpp;
-#if ADC_USE_WAIT || defined(__DOXYGEN__)
- /**
- * @brief Waiting thread.
- */
- thread_reference_t thread;
-#endif
-#if ADC_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__)
- /**
- * @brief Mutex protecting the peripheral.
- */
- mutex_t mutex;
-#endif /* ADC_USE_MUTUAL_EXCLUSION */
-#if defined(ADC_DRIVER_EXT_FIELDS)
- ADC_DRIVER_EXT_FIELDS
+#define adc_lld_configuration_group_fields \
+ /* ADC CFGR1 register initialization data. \
+ NOTE: The bits DMAEN and DMACFG are enforced internally \
+ to the driver, keep them to zero. \
+ NOTE: The bits @p ADC_CFGR1_CONT or @p ADC_CFGR1_DISCEN must be \
+ specified in continuous more or if the buffer depth is \
+ greater than one.*/ \
+ uint32_t cfgr1; \
+ /* ADC CFGR2 register initialization data. \
+ NOTE: CKMODE bits must not be specified in this field and left to \
+ zero.*/ \
+ uint32_t cfgr2; \
+ /* ADC TR register initialization data.*/ \
+ uint32_t tr; \
+ /* ADC SMPR register initialization data.*/ \
+ uint32_t smpr; \
+ /* ADC CHSELR register initialization data. \
+ NOTE: The number of bits at logic level one in this register must \
+ be equal to the number in the @p num_channels field.*/ \
+ uint32_t chselr
+#else
+#define adc_lld_configuration_group_fields \
+ /* ADC CFGR1 register initialization data. \
+ NOTE: The bits DMAEN and DMACFG are enforced internally \
+ to the driver, keep them to zero. \
+ NOTE: The bits @p ADC_CFGR1_CONT or @p ADC_CFGR1_DISCEN must be \
+ specified in continuous more or if the buffer depth is \
+ greater than one.*/ \
+ uint32_t cfgr1; \
+ /* ADC TR register initialization data.*/ \
+ uint32_t tr; \
+ /* ADC SMPR register initialization data.*/ \
+ uint32_t smpr; \
+ /* ADC CHSELR register initialization data. \
+ NOTE: The number of bits at logic level one in this register must \
+ be equal to the number in the @p num_channels field.*/ \
+ uint32_t chselr
#endif
- /* End of the mandatory fields.*/
- /**
- * @brief Pointer to the ADCx registers block.
- */
- ADC_TypeDef *adc;
- /**
- * @brief Pointer to associated DMA channel.
- */
- const stm32_dma_stream_t *dmastp;
- /**
- * @brief DMA mode bit mask.
- */
- uint32_t dmamode;
-};
-
-/*===========================================================================*/
-/* Driver macros. */
-/*===========================================================================*/
/**
* @brief Changes the value of the ADC CCR register.
diff --git a/os/hal/ports/STM32/LLD/ADCv2/hal_adc_lld.h b/os/hal/ports/STM32/LLD/ADCv2/hal_adc_lld.h index 3fe808a8e..5202f946b 100644 --- a/os/hal/ports/STM32/LLD/ADCv2/hal_adc_lld.h +++ b/os/hal/ports/STM32/LLD/ADCv2/hal_adc_lld.h @@ -317,175 +317,66 @@ typedef enum { ADC_ERR_WATCHDOG = 2 /**< ADC watchdog condition. */
} adcerror_t;
-/**
- * @brief Type of a structure representing an ADC driver.
- */
-typedef struct ADCDriver ADCDriver;
-
-/**
- * @brief ADC notification callback type.
- *
- * @param[in] adcp pointer to the @p ADCDriver object triggering the
- * callback
- * @param[in] buffer pointer to the most recent samples data
- * @param[in] n number of buffer rows available starting from @p buffer
- */
-typedef void (*adccallback_t)(ADCDriver *adcp, adcsample_t *buffer, size_t n);
-
-/**
- * @brief ADC error callback type.
- *
- * @param[in] adcp pointer to the @p ADCDriver object triggering the
- * callback
- * @param[in] err ADC error code
- */
-typedef void (*adcerrorcallback_t)(ADCDriver *adcp, adcerror_t err);
-
-/**
- * @brief Conversion group configuration structure.
- * @details This implementation-dependent structure describes a conversion
- * operation.
- * @note The use of this configuration structure requires knowledge of
- * STM32 ADC cell registers interface, please refer to the STM32
- * reference manual for details.
- */
-typedef struct {
- /**
- * @brief Enables the circular buffer mode for the group.
- */
- bool circular;
- /**
- * @brief Number of the analog channels belonging to the conversion group.
- */
- adc_channels_num_t num_channels;
- /**
- * @brief Callback function associated to the group or @p NULL.
- */
- adccallback_t end_cb;
- /**
- * @brief Error callback or @p NULL.
- */
- adcerrorcallback_t error_cb;
- /* End of the mandatory fields.*/
- /**
- * @brief ADC CR1 register initialization data.
- * @note All the required bits must be defined into this field except
- * @p ADC_CR1_SCAN that is enforced inside the driver.
- */
- uint32_t cr1;
- /**
- * @brief ADC CR2 register initialization data.
- * @note All the required bits must be defined into this field except
- * @p ADC_CR2_DMA, @p ADC_CR2_CONT and @p ADC_CR2_ADON that are
- * enforced inside the driver.
- */
- uint32_t cr2;
- /**
- * @brief ADC SMPR1 register initialization data.
- * @details In this field must be specified the sample times for channels
- * 10...18.
- */
- uint32_t smpr1;
- /**
- * @brief ADC SMPR2 register initialization data.
- * @details In this field must be specified the sample times for channels
- * 0...9.
- */
- uint32_t smpr2;
- /**
- * @brief ADC watchdog high threshold register.
- * @details This field defines the high threshold of the analog watchdog.
- */
- uint16_t htr;
- /**
- * @brief ADC watchdog low threshold register.
- * @details This field defines the low threshold of the analog watchdog.
- */
- uint16_t ltr;
- /**
- * @brief ADC SQR1 register initialization data.
- * @details Conversion group sequence 13...16 + sequence length.
- */
- uint32_t sqr1;
- /**
- * @brief ADC SQR2 register initialization data.
- * @details Conversion group sequence 7...12.
- */
- uint32_t sqr2;
- /**
- * @brief ADC SQR3 register initialization data.
- * @details Conversion group sequence 1...6.
- */
- uint32_t sqr3;
-} ADCConversionGroup;
-
-/**
- * @brief Driver configuration structure.
- * @note It could be empty on some architectures.
- */
-typedef struct {
- uint32_t dummy;
-} ADCConfig;
-
-/**
- * @brief Structure representing an ADC driver.
- */
-struct ADCDriver {
- /**
- * @brief Driver state.
- */
- adcstate_t state;
- /**
- * @brief Current configuration data.
- */
- const ADCConfig *config;
- /**
- * @brief Current samples buffer pointer or @p NULL.
- */
- adcsample_t *samples;
- /**
- * @brief Current samples buffer depth or @p 0.
- */
- size_t depth;
- /**
- * @brief Current conversion group pointer or @p NULL.
- */
- const ADCConversionGroup *grpp;
-#if ADC_USE_WAIT || defined(__DOXYGEN__)
- /**
- * @brief Waiting thread.
- */
- thread_reference_t thread;
-#endif
-#if ADC_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__)
- /**
- * @brief Mutex protecting the peripheral.
- */
- mutex_t mutex;
-#endif /* ADC_USE_MUTUAL_EXCLUSION */
-#if defined(ADC_DRIVER_EXT_FIELDS)
- ADC_DRIVER_EXT_FIELDS
-#endif
- /* End of the mandatory fields.*/
- /**
- * @brief Pointer to the ADCx registers block.
- */
- ADC_TypeDef *adc;
- /**
- * @brief Pointer to associated DMA channel.
- */
- const stm32_dma_stream_t *dmastp;
- /**
- * @brief DMA mode bit mask.
- */
- uint32_t dmamode;
-};
-
/*===========================================================================*/
/* Driver macros. */
/*===========================================================================*/
/**
+ * @brief Low level fields of the ADC driver structure.
+ */
+#define adc_lld_driver_fields \
+ /* Pointer to the ADCx registers block.*/ \
+ ADC_TypeDef *adc; \
+ /* Pointer to associated DMA channel.*/ \
+ const stm32_dma_stream_t *dmastp; \
+ /* DMA mode bit mask.*/ \
+ uint32_t dmamode
+
+/**
+ * @brief Low level fields of the ADC configuration structure.
+ */
+#define adc_lld_config_fields \
+ /* Dummy configuration, it is not needed.*/ \
+ uint32_t dummy
+
+/**
+ * @brief Low level fields of the ADC configuration structure.
+ */
+#define adc_lld_configuration_group_fields \
+ /* ADC CR1 register initialization data. \
+ NOTE: All the required bits must be defined into this field except \
+ @p ADC_CR1_SCAN that is enforced inside the driver.*/ \
+ uint32_t cr1; \
+ /* ADC CR2 register initialization data. \
+ NOTE: All the required bits must be defined into this field except \
+ @p ADC_CR2_DMA, @p ADC_CR2_CONT and @p ADC_CR2_ADON that are \
+ enforced inside the driver.*/ \
+ uint32_t cr2; \
+ /* ADC SMPR1 register initialization data. \
+ NOTE: In this field must be specified the sample times for channels \
+ 10...18.*/ \
+ uint32_t smpr1; \
+ /* ADC SMPR2 register initialization data. \
+ NOTE: In this field must be specified the sample times for channels \
+ 0...9.*/ \
+ uint32_t smpr2; \
+ /* ADC watchdog high threshold register. \
+ NOTE: This field defines the high threshold of the analog watchdog.*/ \
+ uint16_t htr; \
+ /* ADC watchdog low threshold register. \
+ NOTE: This field defines the low threshold of the analog watchdog.*/ \
+ uint16_t ltr; \
+ /* ADC SQR1 register initialization data. \
+ NOTE: Conversion group sequence 13...16 + sequence length.*/ \
+ uint32_t sqr1; \
+ /* ADC SQR2 register initialization data. \
+ NOTE: Conversion group sequence 7...12.*/ \
+ uint32_t sqr2; \
+ /* ADC SQR3 register initialization data. \
+ NOTE: Conversion group sequence 1...6.*/ \
+ uint32_t sqr3
+
+/**
* @name Sequences building helper macros
* @{
*/
diff --git a/os/hal/ports/STM32/LLD/ADCv3/hal_adc_lld.h b/os/hal/ports/STM32/LLD/ADCv3/hal_adc_lld.h index 149ef22cf..341fb7687 100644 --- a/os/hal/ports/STM32/LLD/ADCv3/hal_adc_lld.h +++ b/os/hal/ports/STM32/LLD/ADCv3/hal_adc_lld.h @@ -659,186 +659,106 @@ typedef enum { ADC_ERR_AWD3 = 4 /**< Watchdog 3 triggered. */
} adcerror_t;
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
/**
- * @brief Type of a structure representing an ADC driver.
- */
-typedef struct ADCDriver ADCDriver;
+ * @brief Low level fields of the ADC driver structure.
+ */
+#if (STM32_ADC_DUAL_MODE == TRUE) || defined(__DOXYGEN__)
+#define adc_lld_driver_fields \
+ /* Pointer to the master ADCx registers block.*/ \
+ ADC_TypeDef *adcm; \
+ /* Pointer to the slave ADCx registers block.*/ \
+ ADC_TypeDef *adcs; \
+ /* Pointer to the common ADCx_y registers block.*/ \
+ ADC_Common_TypeDef *adcc; \
+ /* Pointer to associated DMA channel.*/ \
+ const stm32_dma_stream_t *dmastp; \
+ /* DMA mode bit mask.*/ \
+ uint32_t dmamode
+#else
+#define adc_lld_driver_fields \
+ /* Pointer to the master ADCx registers block.*/ \
+ ADC_TypeDef *adcm; \
+ /* Pointer to the slave ADCx registers block.*/ \
+ ADC_Common_TypeDef *adcc; \
+ /* Pointer to associated DMA channel.*/ \
+ const stm32_dma_stream_t *dmastp; \
+ /* DMA mode bit mask.*/ \
+ uint32_t dmamode
+#endif
/**
- * @brief ADC notification callback type.
- *
- * @param[in] adcp pointer to the @p ADCDriver object triggering the
- * callback
- * @param[in] buffer pointer to the most recent samples data
- * @param[in] n number of buffer rows available starting from @p buffer
+ * @brief Low level fields of the ADC configuration structure.
*/
-typedef void (*adccallback_t)(ADCDriver *adcp, adcsample_t *buffer, size_t n);
+#define adc_lld_config_fields \
+ /* ADC DIFSEL register initialization data.*/ \
+ uint32_t difsel
/**
- * @brief ADC error callback type.
- *
- * @param[in] adcp pointer to the @p ADCDriver object triggering the
- * callback
- * @param[in] err ADC error code
- */
-typedef void (*adcerrorcallback_t)(ADCDriver *adcp, adcerror_t err);
-
-/**
- * @brief Conversion group configuration structure.
- * @details This implementation-dependent structure describes a conversion
- * operation.
- * @note The use of this configuration structure requires knowledge of
- * STM32 ADC cell registers interface, please refer to the STM32
- * reference manual for details.
- */
-typedef struct {
- /**
- * @brief Enables the circular buffer mode for the group.
- */
- bool circular;
- /**
- * @brief Number of the analog channels belonging to the conversion group.
- */
- adc_channels_num_t num_channels;
- /**
- * @brief Callback function associated to the group or @p NULL.
- */
- adccallback_t end_cb;
- /**
- * @brief Error callback or @p NULL.
- */
- adcerrorcallback_t error_cb;
- /* End of the mandatory fields.*/
- /**
- * @brief ADC CFGR register initialization data.
- * @note The bits DMAEN and DMACFG are enforced internally
- * to the driver, keep them to zero.
- * @note The bits @p ADC_CFGR_CONT or @p ADC_CFGR_DISCEN must be
- * specified in continuous mode or if the buffer depth is
- * greater than one.
- */
- uint32_t cfgr;
+ * @brief Low level fields of the ADC group configuration structure.
+ */
#if (STM32_ADCV3_OVERSAMPLING == TRUE) || defined(__DOXYGEN__)
- /**
- * @brief ADC CFGR2 register initialization data.
- * @note The bits DMAEN and DMACFG are enforced internally
- * to the driver, keep them to zero.
- * @note The bits @p ADC_CFGR_CONT or @p ADC_CFGR_DISCEN must be
- * specified in continuous mode or if the buffer depth is
- * greater than one.
- */
- uint32_t cfgr2;
-#endif
- /**
- * @brief ADC TR1 register initialization data.
- */
- uint32_t tr1;
-#if STM32_ADC_DUAL_MODE || defined(__DOXYGEN__)
- /**
- * @brief ADC CCR register initialization data.
- * @note Put this field to zero if not using oversampling.
- */
- uint32_t ccr;
-#endif
- /**
- * @brief ADC SMPRx registers initialization data.
- */
- uint32_t smpr[2];
- /**
- * @brief ADC SQRx register initialization data.
- */
- uint32_t sqr[4];
-#if STM32_ADC_DUAL_MODE || defined(__DOXYGEN__)
- /**
- * @brief Slave ADC SMPRx registers initialization data.
- * @note This field is only present in dual mode.
- */
- uint32_t ssmpr[2];
- /**
- * @brief Slave ADC SQRx register initialization data.
- * @note This field is only present in dual mode.
- */
- uint32_t ssqr[4];
-#endif /* STM32_ADC_DUAL_MODE */
-} ADCConversionGroup;
-
-/**
- * @brief Driver configuration structure.
- */
-typedef struct {
- /**
- * @brief ADC DIFSEL register initialization data.
- */
- uint32_t difsel;
-} ADCConfig;
-
-/**
- * @brief Structure representing an ADC driver.
- */
-struct ADCDriver {
- /**
- * @brief Driver state.
- */
- adcstate_t state;
- /**
- * @brief Current configuration data.
- */
- const ADCConfig *config;
- /**
- * @brief Current samples buffer pointer or @p NULL.
- */
- adcsample_t *samples;
- /**
- * @brief Current samples buffer depth or @p 0.
- */
- size_t depth;
- /**
- * @brief Current conversion group pointer or @p NULL.
- */
- const ADCConversionGroup *grpp;
-#if ADC_USE_WAIT || defined(__DOXYGEN__)
- /**
- * @brief Waiting thread.
- */
- thread_reference_t thread;
-#endif
-#if ADC_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__)
- /**
- * @brief Mutex protecting the peripheral.
- */
- mutex_t mutex;
-#endif /* ADC_USE_MUTUAL_EXCLUSION */
-#if defined(ADC_DRIVER_EXT_FIELDS)
- ADC_DRIVER_EXT_FIELDS
-#endif
- /* End of the mandatory fields.*/
- /**
- * @brief Pointer to the master ADCx registers block.
- */
- ADC_TypeDef *adcm;
-#if STM32_ADC_DUAL_MODE || defined(__DOXYGEN__)
- /**
- * @brief Pointer to the slave ADCx registers block.
- */
- ADC_TypeDef *adcs;
-#endif /* STM32_ADC_DUAL_MODE */
- /**
- * @brief Pointer to the common ADCx_y registers block.
- */
- ADC_Common_TypeDef *adcc;
- /**
- * @brief Pointer to associated DMA channel.
- */
- const stm32_dma_stream_t *dmastp;
- /**
- * @brief DMA mode bit mask.
- */
- uint32_t dmamode;
-};
-
-/*===========================================================================*/
-/* Driver macros. */
-/*===========================================================================*/
+#if (STM32_ADC_DUAL_MODE == TRUE) || defined(__DOXYGEN__)
+#define adc_lld_configuration_group_fields \
+ /* ADC CFGR register initialization data. \
+ NOTE: The bits DMAEN and DMACFG are enforced internally \
+ to the driver, keep them to zero. \
+ NOTE: The bits @p ADC_CFGR_CONT or @p ADC_CFGR_DISCEN must be \
+ specified in continuous mode or if the buffer depth is \
+ greater than one.*/ \
+ uint32_t cfgr; \
+ /* ADC CFGR2 register initialization data. \
+ NOTE: The bits DMAEN and DMACFG are enforced internally \
+ to the driver, keep them to zero. \
+ NOTE: The bits @p ADC_CFGR_CONT or @p ADC_CFGR_DISCEN must be \
+ specified in continuous mode or if the buffer depth is \
+ greater than one.*/ \
+ uint32_t cfgr2; \
+ /* ADC TR1 register initialization data.*/ \
+ uint32_t tr1; \
+ /* ADC CCR register initialization data. \
+ NOTE: Put this field to zero if not using oversampling.*/ \
+ uint32_t ccr; \
+ /* ADC SMPRx registers initialization data.*/ \
+ uint32_t smpr[2]; \
+ /* ADC SQRx register initialization data.*/ \
+ uint32_t sqr[4]; \
+ /* Slave ADC SMPRx registers initialization data. \
+ NOTE: This field is only present in dual mode.*/ \
+ uint32_t ssmpr[2]; \
+ /* Slave ADC SQRx register initialization data. \
+ NOTE: This field is only present in dual mode.*/ \
+ uint32_t ssqr[4]
+#else /* STM32_ADC_DUAL_MODE == FALSE */
+#define adc_lld_configuration_group_fields \
+ uint32_t cfgr; \
+ uint32_t cfgr2; \
+ uint32_t tr1; \
+ uint32_t smpr[2]; \
+ uint32_t sqr[4]
+#endif /* STM32_ADC_DUAL_MODE == FALSE */
+
+#else /* STM32_ADCV3_OVERSAMPLING == FALSE */
+#if (STM32_ADC_DUAL_MODE == TRUE) || defined(__DOXYGEN__)
+#define adc_lld_configuration_group_fields \
+ uint32_t cfgr; \
+ uint32_t tr1; \
+ uint32_t ccr; \
+ uint32_t smpr[2]; \
+ uint32_t sqr[4]; \
+ uint32_t ssmpr[2]; \
+ uint32_t ssqr[4]
+#else /* STM32_ADC_DUAL_MODE == FALSE */
+#define adc_lld_configuration_group_fields \
+ uint32_t cfgr; \
+ uint32_t tr1; \
+ uint32_t smpr[2]; \
+ uint32_t sqr[4]
+#endif /* STM32_ADC_DUAL_MODE == FALSE */
+#endif /* STM32_ADCV3_OVERSAMPLING == FALSE */
/**
* @name Threashold register initializer
|