diff options
Diffstat (limited to 'os/hal/ports/STM32/LLD/QUADSPIv1/hal_wspi_lld.c')
| -rw-r--r-- | os/hal/ports/STM32/LLD/QUADSPIv1/hal_wspi_lld.c | 208 |
1 files changed, 208 insertions, 0 deletions
diff --git a/os/hal/ports/STM32/LLD/QUADSPIv1/hal_wspi_lld.c b/os/hal/ports/STM32/LLD/QUADSPIv1/hal_wspi_lld.c new file mode 100644 index 000000000..233caa67a --- /dev/null +++ b/os/hal/ports/STM32/LLD/QUADSPIv1/hal_wspi_lld.c @@ -0,0 +1,208 @@ +/*
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file hal_wspi_lld.c
+ * @brief PLATFORM WSPI subsystem low level driver source.
+ *
+ * @addtogroup WSPI
+ * @{
+ */
+
+#include "hal.h"
+
+#if (HAL_USE_WSPI == TRUE) || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/** @brief WSPID1 driver identifier.*/
+#if (PLATFORM_WSPI_USE_WSPI1 == TRUE) || defined(__DOXYGEN__)
+WSPIDriver WSPID1;
+#endif
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level WSPI driver initialization.
+ *
+ * @notapi
+ */
+void wspi_lld_init(void) {
+
+#if PLATFORM_WSPI_USE_WSPI1
+ wspiObjectInit(&WSPID1);
+#endif
+}
+
+/**
+ * @brief Configures and activates the WSPI peripheral.
+ *
+ * @param[in] wspip pointer to the @p WSPIDriver object
+ *
+ * @notapi
+ */
+void wspi_lld_start(WSPIDriver *wspip) {
+
+ /* If in stopped state then full initialization.*/
+ if (wspip->state == WSPI_STOP) {
+#if PLATFORM_WSPI_USE_WSPI1
+ if (&WSPID1 == wspip) {
+ }
+#endif
+
+ /* Common initializations.*/
+ }
+
+ /* WSPI setup and enable.*/
+}
+
+/**
+ * @brief Deactivates the WSPI peripheral.
+ *
+ * @param[in] wspip pointer to the @p WSPIDriver object
+ *
+ * @notapi
+ */
+void wspi_lld_stop(WSPIDriver *wspip) {
+
+ /* If in ready state then disables WSPI.*/
+ if (wspip->state == WSPI_READY) {
+
+ /* WSPI disable.*/
+
+ /* Stopping involved clocks.*/
+#if PLATFORM_WSPI_USE_WSPI1
+ if (&WSPID1 == wspip) {
+ }
+#endif
+ }
+}
+
+/**
+ * @brief Sends a command without data phase.
+ * @post At the end of the operation the configured callback is invoked.
+ *
+ * @param[in] wspip pointer to the @p WSPIDriver object
+ * @param[in] cmdp pointer to the command descriptor
+ *
+ * @notapi
+ */
+void wspi_lld_command(WSPIDriver *wspip, const wspi_command_t *cmdp) {
+
+ (void)wspip;
+ (void)cmdp;
+}
+
+/**
+ * @brief Sends a command with data over the WSPI bus.
+ * @post At the end of the operation the configured callback is invoked.
+ *
+ * @param[in] wspip pointer to the @p WSPIDriver object
+ * @param[in] cmdp pointer to the command descriptor
+ * @param[in] n number of bytes to send
+ * @param[in] txbuf the pointer to the transmit buffer
+ *
+ * @notapi
+ */
+void wspi_lld_send(WSPIDriver *wspip, const wspi_command_t *cmdp,
+ size_t n, const uint8_t *txbuf) {
+
+ (void)wspip;
+ (void)cmdp;
+ (void)n;
+ (void)txbuf;
+}
+
+/**
+ * @brief Sends a command then receives data over the WSPI bus.
+ * @post At the end of the operation the configured callback is invoked.
+ *
+ * @param[in] wspip pointer to the @p WSPIDriver object
+ * @param[in] cmdp pointer to the command descriptor
+ * @param[in] n number of bytes to send
+ * @param[out] rxbuf the pointer to the receive buffer
+ *
+ * @notapi
+ */
+void wspi_lld_receive(WSPIDriver *wspip, const wspi_command_t *cmdp,
+ size_t n, uint8_t *rxbuf) {
+
+ (void)wspip;
+ (void)cmdp;
+ (void)n;
+ (void)rxbuf;
+}
+
+#if (WSPI_SUPPORTS_MEMMAP == TRUE) || defined(__DOXYGEN__)
+/**
+ * @brief Maps in memory space a WSPI flash device.
+ * @pre The memory flash device must be initialized appropriately
+ * before mapping it in memory space.
+ *
+ * @param[in] wspip pointer to the @p WSPIDriver object
+ * @param[in] cmdp pointer to the command descriptor
+ * @param[out] addrp pointer to the memory start address of the mapped
+ * flash or @p NULL
+ *
+ * @notapi
+ */
+void wspi_lld_map_flash(WSPIDriver *wspip,
+ const wspi_command_t *cmdp,
+ uint8_t **addrp) {
+
+ (void)wspip;
+ (void)cmdp;
+ (void)addrp;
+}
+
+/**
+ * @brief Unmaps from memory space a WSPI flash device.
+ * @post The memory flash device must be re-initialized for normal
+ * commands exchange.
+ *
+ * @param[in] wspip pointer to the @p WSPIDriver object
+ *
+ * @notapi
+ */
+void wspi_lld_unmap_flash(WSPIDriver *wspip) {
+
+ (void)wspip;
+}
+#endif /* WSPI_SUPPORTS_MEMMAP == TRUE */
+
+#endif /* HAL_USE_WSPI */
+
+/** @} */
|