aboutsummaryrefslogtreecommitdiffstats
path: root/os/hal/platforms/STM8S/stm8s.h
diff options
context:
space:
mode:
Diffstat (limited to 'os/hal/platforms/STM8S/stm8s.h')
-rw-r--r--os/hal/platforms/STM8S/stm8s.h2725
1 files changed, 0 insertions, 2725 deletions
diff --git a/os/hal/platforms/STM8S/stm8s.h b/os/hal/platforms/STM8S/stm8s.h
deleted file mode 100644
index 07a8362d3..000000000
--- a/os/hal/platforms/STM8S/stm8s.h
+++ /dev/null
@@ -1,2725 +0,0 @@
-/**
- ******************************************************************************
- * @file stm8s.h
- * @author MCD Application Team
- * @version V2.1.0
- * @date 18-November-2011
- * @brief This file contains all HW registers definitions and memory mapping.
- ******************************************************************************
- * @attention
- *
- * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
- * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
- * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
- * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
- * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
- * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
- *
- * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM8S_H
-#define __STM8S_H
-
-/** @addtogroup STM8S_StdPeriph_Driver
- * @{
- */
-
-/* Uncomment the line below according to the target STM8S or STM8A device used in your
- application. */
-
- /* #define STM8S208 */ /*!< STM8S High density devices with CAN */
- /* #define STM8S207 */ /*!< STM8S High density devices without CAN */
- /* #define STM8S007 */ /*!< STM8S Value Line High density devices */
- /* #define STM8AF52Ax */ /*!< STM8A High density devices with CAN */
- /* #define STM8AF62Ax */ /*!< STM8A High density devices without CAN */
- /* #define STM8S105 */ /*!< STM8S Medium density devices */
- /* #define STM8S005 */ /*!< STM8S Value Line Medium density devices */
- /* #define STM8AF626x */ /*!< STM8A Medium density devices */
- /* #define STM8S103 */ /*!< STM8S Low density devices */
- /* #define STM8S003 */ /*!< STM8S Value Line Low density devices */
- /* #define STM8S903 */ /*!< STM8S Low density devices */
-
-/* Tip: To avoid modifying this file each time you need to switch between these
- devices, you can define the device in your toolchain compiler preprocessor.
-
- - High-Density STM8A devices are the STM8AF52xx STM8AF6269/8x/Ax,
- STM8AF51xx, and STM8AF6169/7x/8x/9x/Ax microcontrollers where the Flash memory
- density ranges between 32 to 128 Kbytes
- - Medium-Density STM8A devices are the STM8AF622x/4x, STM8AF6266/68,
- STM8AF612x/4x, and STM8AF6166/68 microcontrollers where the Flash memory
- density ranges between 8 to 32 Kbytes
- - High-Density STM8S devices are the STM8S207xx, STM8S007 and STM8S208xx microcontrollers
- where the Flash memory density ranges between 32 to 128 Kbytes.
- - Medium-Density STM8S devices are the STM8S105x and STM8S005 microcontrollers
- where the Flash memory density ranges between 16 to 32-Kbytes.
- - Low-Density STM8S devices are the STM8S103xx, STM8S003 and STM8S903xx microcontrollers
- where the Flash density is 8 Kbytes. */
-
-#if !defined (STM8S208) && !defined (STM8S207) && !defined (STM8S105) && \
- !defined (STM8S103) && !defined (STM8S903) && !defined (STM8AF52Ax) && \
- !defined (STM8AF62Ax) && !defined (STM8AF626x) && !defined (STM8S007) && \
- !defined (STM8S003)&& !defined (STM8S005)
- #error "Please select first the target STM8S/A device used in your application (in stm8s.h file)"
-#endif
-
-/******************************************************************************/
-/* Library configuration section */
-/******************************************************************************/
-/* Check the used compiler */
-#if defined(__CSMC__)
- #define _COSMIC_
-#elif defined(__RCST7__)
- #define _RAISONANCE_
-#elif defined(__ICCSTM8__)
- #define _IAR_
-#else
- #error "Unsupported Compiler!" /* Compiler defines not found */
-#endif
-
-#if !defined USE_STDPERIPH_DRIVER
-/* Comment the line below if you will not use the peripherals drivers.
- In this case, these drivers will not be included and the application code will be
- based on direct access to peripherals registers */
-/* CHIBIOS FIX */
-/* #define USE_STDPERIPH_DRIVER*/
-#endif
-
-/**
- * @brief In the following line adjust the value of External High Speed oscillator (HSE)
- used in your application
-
- Tip: To avoid modifying this file each time you need to use different HSE, you
- can define the HSE value in your toolchain compiler preprocessor.
- */
-#if !defined HSE_Value
- #if defined (STM8S208) || defined (STM8S207) || defined (STM8S007) || defined (STM8AF52Ax) || \
- defined (STM8AF62Ax)
- #define HSE_VALUE ((u32)24000000) /* Value of the External oscillator in Hz*/
- #else
- #define HSE_VALUE ((u32)16000000) /* Value of the External oscillator in Hz*/
- #endif /* STM8S208 || STM8S207 || STM8S007 || STM8AF62Ax || STM8AF52Ax */
-#endif /* HSE_Value */
-
-/**
- * @brief Definition of Device on-chip RC oscillator frequencies
- */
-#define HSI_VALUE ((uint32_t)16000000) /*!< Typical Value of the HSI in Hz */
-#define LSI_VALUE ((uint32_t)128000) /*!< Typical Value of the LSI in Hz */
-
-#ifdef _COSMIC_
- #define FAR @far
- #define NEAR @near
- #define TINY @tiny
- #define EEPROM @eeprom
- #define CONST const
-#elif defined (_RAISONANCE_) /* __RCST7__ */
- #define FAR far
- #define NEAR data
- #define TINY page0
- #define EEPROM eeprom
- #define CONST code
- #if defined (STM8S208) || defined (STM8S207) || defined (STM8S007) || defined (STM8AF52Ax) || \
- defined (STM8AF62Ax)
- /*!< Used with memory Models for code higher than 64K */
- #define MEMCPY fmemcpy
- #else /* STM8S903, STM8S103, STM8S003, STM8S105, STM8AF626x */
- /*!< Used with memory Models for code less than 64K */
- #define MEMCPY memcpy
- #endif /* STM8S208 or STM8S207 or STM8S007 or STM8AF62Ax or STM8AF52Ax */
-#else /*_IAR_*/
- #define FAR __far
- #define NEAR __near
- #define TINY __tiny
- #define EEPROM __eeprom
- #define CONST const
-#endif /* __CSMC__ */
-
-/* For FLASH routines, select whether pointer will be declared as near (2 bytes,
- to handle code smaller than 64KB) or far (3 bytes, to handle code larger
- than 64K) */
-
-#if defined (STM8S105) || defined (STM8S005) || defined (STM8S103) || defined (STM8S003) || \
- defined (STM8S903) || defined (STM8AF626x)
-/*!< Used with memory Models for code smaller than 64K */
- #define PointerAttr NEAR
-#else /* STM8S208 or STM8S207 or STM8AF62Ax or STM8AF52Ax */
-/*!< Used with memory Models for code higher than 64K */
- #define PointerAttr FAR
-#endif /* STM8S105 or STM8S103 or STM8S003 or STM8S903 or STM8AF626x */
-
-/* Uncomment the line below to enable the FLASH functions execution from RAM */
-#if !defined (RAM_EXECUTION)
-/* #define RAM_EXECUTION (1) */
-#endif /* RAM_EXECUTION */
-
-#ifdef RAM_EXECUTION
- #ifdef _COSMIC_
- #define IN_RAM(a) a
- #elif defined (_RAISONANCE_) /* __RCST7__ */
- #define IN_RAM(a) a inram
- #else /*_IAR_*/
- #define IN_RAM(a) __ramfunc a
- #endif /* _COSMIC_ */
-#else
- #define IN_RAM(a) a
-#endif /* RAM_EXECUTION */
-
-/*!< [31:16] STM8S Standard Peripheral Library main version V2.1.0*/
-#define __STM8S_STDPERIPH_VERSION_MAIN ((uint8_t)0x02) /*!< [31:24] main version */
-#define __STM8S_STDPERIPH_VERSION_SUB1 ((uint8_t)0x01) /*!< [23:16] sub1 version */
-#define __STM8S_STDPERIPH_VERSION_SUB2 ((uint8_t)0x00) /*!< [15:8] sub2 version */
-#define __STM8S_STDPERIPH_VERSION_RC ((uint8_t)0x00) /*!< [7:0] release candidate */
-#define __STM8S_STDPERIPH_VERSION ( (__STM8S_STDPERIPH_VERSION_MAIN << 24)\
- |(__STM8S_STDPERIPH_VERSION_SUB1 << 16)\
- |(__STM8S_STDPERIPH_VERSION_SUB2 << 8)\
- |(__STM8S_STDPERIPH_VERSION_RC))
-
-/******************************************************************************/
-
-/* Includes ------------------------------------------------------------------*/
-
-/* Exported types and constants ----------------------------------------------*/
-
-/** @addtogroup Exported_types
- * @{
- */
-
-/**
- * IO definitions
- *
- * define access restrictions to peripheral registers
- */
-#define __I volatile const /*!< defines 'read only' permissions */
-#define __O volatile /*!< defines 'write only' permissions */
-#define __IO volatile /*!< defines 'read / write' permissions */
-
-/*!< Signed integer types */
-/* CHIBIOS FIX */
-#if 0
-typedef signed char int8_t;
-typedef signed short int16_t;
-typedef signed long int32_t;
-
-/*!< Unsigned integer types */
-typedef unsigned char uint8_t;
-typedef unsigned short uint16_t;
-typedef unsigned long uint32_t;
-#endif
-
-/*!< STM8 Standard Peripheral Library old types (maintained for legacy purpose) */
-
-typedef int32_t s32;
-typedef int16_t s16;
-typedef int8_t s8;
-
-typedef uint32_t u32;
-typedef uint16_t u16;
-typedef uint8_t u8;
-
-
-typedef enum {FALSE = 0, TRUE = !FALSE} bool;
-
-typedef enum {RESET = 0, SET = !RESET} FlagStatus, ITStatus, BitStatus, BitAction;
-
-typedef enum {DISABLE = 0, ENABLE = !DISABLE} FunctionalState;
-#define IS_FUNCTIONALSTATE_OK(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
-
-typedef enum {ERROR = 0, SUCCESS = !ERROR} ErrorStatus;
-
-#define U8_MAX (255)
-#define S8_MAX (127)
-#define S8_MIN (-128)
-#define U16_MAX (65535u)
-#define S16_MAX (32767)
-#define S16_MIN (-32768)
-#define U32_MAX (4294967295uL)
-#define S32_MAX (2147483647)
-#define S32_MIN (-2147483648uL)
-
-/**
- * @}
- */
-
-/** @addtogroup MAP_FILE_Exported_Types_and_Constants
- * @{
- */
-
-/******************************************************************************/
-/* IP registers structures */
-/******************************************************************************/
-
-/**
- * @brief General Purpose I/Os (GPIO)
- */
-typedef struct GPIO_struct
-{
- __IO uint8_t ODR; /*!< Output Data Register */
- __IO uint8_t IDR; /*!< Input Data Register */
- __IO uint8_t DDR; /*!< Data Direction Register */
- __IO uint8_t CR1; /*!< Configuration Register 1 */
- __IO uint8_t CR2; /*!< Configuration Register 2 */
-}
-GPIO_TypeDef;
-
-/** @addtogroup GPIO_Registers_Reset_Value
- * @{
- */
-
-#define GPIO_ODR_RESET_VALUE ((uint8_t)0x00)
-#define GPIO_DDR_RESET_VALUE ((uint8_t)0x00)
-#define GPIO_CR1_RESET_VALUE ((uint8_t)0x00)
-#define GPIO_CR2_RESET_VALUE ((uint8_t)0x00)
-
-/**
- * @}
- */
-
-/*----------------------------------------------------------------------------*/
-#if defined(STM8S105) || defined(STM8S005) || defined(STM8S103) || defined(STM8S003) || \
- defined(STM8S903) || defined(STM8AF626x)
-/**
- * @brief Analog to Digital Converter (ADC1)
- */
- typedef struct ADC1_struct
- {
- __IO uint8_t DB0RH; /*!< ADC1 Data Buffer Register (MSB) */
- __IO uint8_t DB0RL; /*!< ADC1 Data Buffer Register (LSB) */
- __IO uint8_t DB1RH; /*!< ADC1 Data Buffer Register (MSB) */
- __IO uint8_t DB1RL; /*!< ADC1 Data Buffer Register (LSB) */
- __IO uint8_t DB2RH; /*!< ADC1 Data Buffer Register (MSB) */
- __IO uint8_t DB2RL; /*!< ADC1 Data Buffer Register (LSB) */
- __IO uint8_t DB3RH; /*!< ADC1 Data Buffer Register (MSB) */
- __IO uint8_t DB3RL; /*!< ADC1 Data Buffer Register (LSB) */
- __IO uint8_t DB4RH; /*!< ADC1 Data Buffer Register (MSB) */
- __IO uint8_t DB4RL; /*!< ADC1 Data Buffer Register (LSB) */
- __IO uint8_t DB5RH; /*!< ADC1 Data Buffer Register (MSB) */
- __IO uint8_t DB5RL; /*!< ADC1 Data Buffer Register (LSB) */
- __IO uint8_t DB6RH; /*!< ADC1 Data Buffer Register (MSB) */
- __IO uint8_t DB6RL; /*!< ADC1 Data Buffer Register (LSB) */
- __IO uint8_t DB7RH; /*!< ADC1 Data Buffer Register (MSB) */
- __IO uint8_t DB7RL; /*!< ADC1 Data Buffer Register (LSB) */
- __IO uint8_t DB8RH; /*!< ADC1 Data Buffer Register (MSB) */
- __IO uint8_t DB8RL; /*!< ADC1 Data Buffer Register (LSB) */
- __IO uint8_t DB9RH; /*!< ADC1 Data Buffer Register (MSB) */
- __IO uint8_t DB9RL; /*!< ADC1 Data Buffer Register (LSB) */
- uint8_t RESERVED[12]; /*!< Reserved byte */
- __IO uint8_t CSR; /*!< ADC1 control status register */
- __IO uint8_t CR1; /*!< ADC1 configuration register 1 */
- __IO uint8_t CR2; /*!< ADC1 configuration register 2 */
- __IO uint8_t CR3; /*!< ADC1 configuration register 3 */
- __IO uint8_t DRH; /*!< ADC1 Data high */
- __IO uint8_t DRL; /*!< ADC1 Data low */
- __IO uint8_t TDRH; /*!< ADC1 Schmitt trigger disable register high */
- __IO uint8_t TDRL; /*!< ADC1 Schmitt trigger disable register low */
- __IO uint8_t HTRH; /*!< ADC1 high threshold register High*/
- __IO uint8_t HTRL; /*!< ADC1 high threshold register Low*/
- __IO uint8_t LTRH; /*!< ADC1 low threshold register high */
- __IO uint8_t LTRL; /*!< ADC1 low threshold register low */
- __IO uint8_t AWSRH; /*!< ADC1 watchdog status register high */
- __IO uint8_t AWSRL; /*!< ADC1 watchdog status register low */
- __IO uint8_t AWCRH; /*!< ADC1 watchdog control register high */
- __IO uint8_t AWCRL; /*!< ADC1 watchdog control register low */
- }
- ADC1_TypeDef;
-
-/** @addtogroup ADC1_Registers_Reset_Value
- * @{
- */
- #define ADC1_CSR_RESET_VALUE ((uint8_t)0x00)
- #define ADC1_CR1_RESET_VALUE ((uint8_t)0x00)
- #define ADC1_CR2_RESET_VALUE ((uint8_t)0x00)
- #define ADC1_CR3_RESET_VALUE ((uint8_t)0x00)
- #define ADC1_TDRL_RESET_VALUE ((uint8_t)0x00)
- #define ADC1_TDRH_RESET_VALUE ((uint8_t)0x00)
- #define ADC1_HTRL_RESET_VALUE ((uint8_t)0x03)
- #define ADC1_HTRH_RESET_VALUE ((uint8_t)0xFF)
- #define ADC1_LTRH_RESET_VALUE ((uint8_t)0x00)
- #define ADC1_LTRL_RESET_VALUE ((uint8_t)0x00)
- #define ADC1_AWCRH_RESET_VALUE ((uint8_t)0x00)
- #define ADC1_AWCRL_RESET_VALUE ((uint8_t)0x00)
-/**
- * @}
- */
-
-/** @addtogroup ADC1_Registers_Bits_Definition
- * @{
- */
- #define ADC1_CSR_EOC ((uint8_t)0x80) /*!< End of Conversion mask */
- #define ADC1_CSR_AWD ((uint8_t)0x40) /*!< Analog Watch Dog Status mask */
- #define ADC1_CSR_EOCIE ((uint8_t)0x20) /*!< Interrupt Enable for EOC mask */
- #define ADC1_CSR_AWDIE ((uint8_t)0x10) /*!< Analog Watchdog interrupt enable mask */
- #define ADC1_CSR_CH ((uint8_t)0x0F) /*!< Channel selection bits mask */
-
- #define ADC1_CR1_SPSEL ((uint8_t)0x70) /*!< Prescaler selection mask */
- #define ADC1_CR1_CONT ((uint8_t)0x02) /*!< Continuous conversion mask */
- #define ADC1_CR1_ADON ((uint8_t)0x01) /*!< A/D Converter on/off mask */
-
- #define ADC1_CR2_EXTTRIG ((uint8_t)0x40) /*!< External trigger enable mask */
- #define ADC1_CR2_EXTSEL ((uint8_t)0x30) /*!< External event selection mask */
- #define ADC1_CR2_ALIGN ((uint8_t)0x08) /*!< Data Alignment mask */
- #define ADC1_CR2_SCAN ((uint8_t)0x02) /*!< Scan mode mask */
-
- #define ADC1_CR3_DBUF ((uint8_t)0x80) /*!< Data Buffer Enable mask */
- #define ADC1_CR3_OVR ((uint8_t)0x40) /*!< Overrun Status Flag mask */
-
-#endif /* (STM8S105) ||(STM8S103) || (STM8S005) ||(STM8S003) || (STM8S903) || (STM8AF626x) */
-/**
- * @}
- */
-
-/*----------------------------------------------------------------------------*/
-/**
- * @brief Analog to Digital Converter (ADC2)
- */
-#if defined(STM8S208) || defined(STM8S207) || defined (STM8S007) || defined (STM8AF52Ax) || defined (STM8AF62Ax)
- typedef struct ADC2_struct
- {
- __IO uint8_t CSR; /*!< ADC2 control status register */
- __IO uint8_t CR1; /*!< ADC2 configuration register 1 */
- __IO uint8_t CR2; /*!< ADC2 configuration register 2 */
- uint8_t RESERVED; /*!< Reserved byte */
- __IO uint8_t DRH; /*!< ADC2 Data high */
- __IO uint8_t DRL; /*!< ADC2 Data low */
- __IO uint8_t TDRH; /*!< ADC2 Schmitt trigger disable register high */
- __IO uint8_t TDRL; /*!< ADC2 Schmitt trigger disable register low */
- }
- ADC2_TypeDef;
-
-/** @addtogroup ADC2_Registers_Reset_Value
- * @{
- */
- #define ADC2_CSR_RESET_VALUE ((uint8_t)0x00)
- #define ADC2_CR1_RESET_VALUE ((uint8_t)0x00)
- #define ADC2_CR2_RESET_VALUE ((uint8_t)0x00)
- #define ADC2_TDRL_RESET_VALUE ((uint8_t)0x00)
- #define ADC2_TDRH_RESET_VALUE ((uint8_t)0x00)
-/**
- * @}
- */
-
-/** @addtogroup ADC2_Registers_Bits_Definition
- * @{
- */
- #define ADC2_CSR_EOC ((uint8_t)0x80) /*!< End of Conversion mask */
- #define ADC2_CSR_EOCIE ((uint8_t)0x20) /*!< Interrupt Enable for EOC mask */
- #define ADC2_CSR_CH ((uint8_t)0x0F) /*!< Channel selection bits mask */
-
- #define ADC2_CR1_SPSEL ((uint8_t)0x70) /*!< Prescaler selection mask */
- #define ADC2_CR1_CONT ((uint8_t)0x02) /*!< Continuous conversion mask */
- #define ADC2_CR1_ADON ((uint8_t)0x01) /*!< A/D Converter on/off mask */
-
- #define ADC2_CR2_EXTTRIG ((uint8_t)0x40) /*!< External trigger enable mask */
- #define ADC2_CR2_EXTSEL ((uint8_t)0x30) /*!< External event selection mask */
- #define ADC2_CR2_ALIGN ((uint8_t)0x08) /*!< Data Alignment mask */
-
-#endif /* (STM8S208) ||(STM8S207) || defined (STM8S007) || (STM8AF62Ax) || (STM8AF52Ax) */
-/**
- * @}
- */
-
-/*----------------------------------------------------------------------------*/
-
-/**
- * @brief Auto Wake Up (AWU) peripheral registers.
- */
-typedef struct AWU_struct
-{
- __IO uint8_t CSR; /*!< AWU Control status register */
- __IO uint8_t APR; /*!< AWU Asynchronous prescaler buffer */
- __IO uint8_t TBR; /*!< AWU Time base selection register */
-}
-AWU_TypeDef;
-
-/** @addtogroup AWU_Registers_Reset_Value
- * @{
- */
-#define AWU_CSR_RESET_VALUE ((uint8_t)0x00)
-#define AWU_APR_RESET_VALUE ((uint8_t)0x3F)
-#define AWU_TBR_RESET_VALUE ((uint8_t)0x00)
-
-/**
- * @}
- */
-
-/** @addtogroup AWU_Registers_Bits_Definition
- * @{
- */
-
-#define AWU_CSR_AWUF ((uint8_t)0x20) /*!< Interrupt flag mask */
-#define AWU_CSR_AWUEN ((uint8_t)0x10) /*!< Auto Wake-up enable mask */
-#define AWU_CSR_MSR ((uint8_t)0x01) /*!< LSI Measurement enable mask */
-
-#define AWU_APR_APR ((uint8_t)0x3F) /*!< Asynchronous Prescaler divider mask */
-
-#define AWU_TBR_AWUTB ((uint8_t)0x0F) /*!< Timebase selection mask */
-
-/**
- * @}
- */
-
-/*----------------------------------------------------------------------------*/
-/**
- * @brief Beeper (BEEP) peripheral registers.
- */
-
-typedef struct BEEP_struct
-{
- __IO uint8_t CSR; /*!< BEEP Control status register */
-}
-BEEP_TypeDef;
-
-/** @addtogroup BEEP_Registers_Reset_Value
- * @{
- */
-#define BEEP_CSR_RESET_VALUE ((uint8_t)0x1F)
-/**
- * @}
- */
-
-/** @addtogroup BEEP_Registers_Bits_Definition
- * @{
- */
-#define BEEP_CSR_BEEPSEL ((uint8_t)0xC0) /*!< Beeper frequency selection mask */
-#define BEEP_CSR_BEEPEN ((uint8_t)0x20) /*!< Beeper enable mask */
-#define BEEP_CSR_BEEPDIV ((uint8_t)0x1F) /*!< Beeper Divider prescalar mask */
-/**
- * @}
- */
-
-/*----------------------------------------------------------------------------*/
-/**
- * @brief Clock Controller (CLK)
- */
-typedef struct CLK_struct
-{
- __IO uint8_t ICKR; /*!< Internal Clocks Control Register */
- __IO uint8_t ECKR; /*!< External Clocks Control Register */
- uint8_t RESERVED; /*!< Reserved byte */
- __IO uint8_t CMSR; /*!< Clock Master Status Register */
- __IO uint8_t SWR; /*!< Clock Master Switch Register */
- __IO uint8_t SWCR; /*!< Switch Control Register */
- __IO uint8_t CKDIVR; /*!< Clock Divider Register */
- __IO uint8_t PCKENR1; /*!< Peripheral Clock Gating Register 1 */
- __IO uint8_t CSSR; /*!< Clock Security System Register */
- __IO uint8_t CCOR; /*!< Configurable Clock Output Register */
- __IO uint8_t PCKENR2; /*!< Peripheral Clock Gating Register 2 */
- uint8_t RESERVED1; /*!< Reserved byte */
- __IO uint8_t HSITRIMR; /*!< HSI Calibration Trimmer Register */
- __IO uint8_t SWIMCCR; /*!< SWIM clock control register */
-}
-CLK_TypeDef;
-
-/** @addtogroup CLK_Registers_Reset_Value
- * @{
- */
-
-#define CLK_ICKR_RESET_VALUE ((uint8_t)0x01)
-#define CLK_ECKR_RESET_VALUE ((uint8_t)0x00)
-#define CLK_CMSR_RESET_VALUE ((uint8_t)0xE1)
-#define CLK_SWR_RESET_VALUE ((uint8_t)0xE1)
-#define CLK_SWCR_RESET_VALUE ((uint8_t)0x00)
-#define CLK_CKDIVR_RESET_VALUE ((uint8_t)0x18)
-#define CLK_PCKENR1_RESET_VALUE ((uint8_t)0xFF)
-#define CLK_PCKENR2_RESET_VALUE ((uint8_t)0xFF)
-#define CLK_CSSR_RESET_VALUE ((uint8_t)0x00)
-#define CLK_CCOR_RESET_VALUE ((uint8_t)0x00)
-#define CLK_HSITRIMR_RESET_VALUE ((uint8_t)0x00)
-#define CLK_SWIMCCR_RESET_VALUE ((uint8_t)0x00)
-
-/**
- * @}
- */
-
-/** @addtogroup CLK_Registers_Bits_Definition
- * @{
- */
-#define CLK_ICKR_SWUAH ((uint8_t)0x20) /*!< Slow Wake-up from Active Halt/Halt modes */
-#define CLK_ICKR_LSIRDY ((uint8_t)0x10) /*!< Low speed internal oscillator ready */
-#define CLK_ICKR_LSIEN ((uint8_t)0x08) /*!< Low speed internal RC oscillator enable */
-#define CLK_ICKR_FHWU ((uint8_t)0x04) /*!< Fast Wake-up from Active Halt/Halt mode */
-#define CLK_ICKR_HSIRDY ((uint8_t)0x02) /*!< High speed internal RC oscillator ready */
-#define CLK_ICKR_HSIEN ((uint8_t)0x01) /*!< High speed internal RC oscillator enable */
-
-#define CLK_ECKR_HSERDY ((uint8_t)0x02) /*!< High speed external crystal oscillator ready */
-#define CLK_ECKR_HSEEN ((uint8_t)0x01) /*!< High speed external crystal oscillator enable */
-
-#define CLK_CMSR_CKM ((uint8_t)0xFF) /*!< Clock master status bits */
-
-#define CLK_SWR_SWI ((uint8_t)0xFF) /*!< Clock master selection bits */
-
-#define CLK_SWCR_SWIF ((uint8_t)0x08) /*!< Clock switch interrupt flag */
-#define CLK_SWCR_SWIEN ((uint8_t)0x04) /*!< Clock switch interrupt enable */
-#define CLK_SWCR_SWEN ((uint8_t)0x02) /*!< Switch start/stop */
-#define CLK_SWCR_SWBSY ((uint8_t)0x01) /*!< Switch busy flag*/
-
-#define CLK_CKDIVR_HSIDIV ((uint8_t)0x18) /*!< High speed internal clock prescaler */
-#define CLK_CKDIVR_CPUDIV ((uint8_t)0x07) /*!< CPU clock prescaler */
-
-#define CLK_PCKENR1_TIM1 ((uint8_t)0x80) /*!< Timer 1 clock enable */
-#define CLK_PCKENR1_TIM3 ((uint8_t)0x40) /*!< Timer 3 clock enable */
-#define CLK_PCKENR1_TIM2 ((uint8_t)0x20) /*!< Timer 2 clock enable */
-#define CLK_PCKENR1_TIM5 ((uint8_t)0x20) /*!< Timer 5 clock enable */
-#define CLK_PCKENR1_TIM4 ((uint8_t)0x10) /*!< Timer 4 clock enable */
-#define CLK_PCKENR1_TIM6 ((uint8_t)0x10) /*!< Timer 6 clock enable */
-#define CLK_PCKENR1_UART3 ((uint8_t)0x08) /*!< UART3 clock enable */
-#define CLK_PCKENR1_UART2 ((uint8_t)0x08) /*!< UART2 clock enable */
-#define CLK_PCKENR1_UART1 ((uint8_t)0x04) /*!< UART1 clock enable */
-#define CLK_PCKENR1_SPI ((uint8_t)0x02) /*!< SPI clock enable */
-#define CLK_PCKENR1_I2C ((uint8_t)0x01) /*!< I2C clock enable */
-
-#define CLK_PCKENR2_CAN ((uint8_t)0x80) /*!< CAN clock enable */
-#define CLK_PCKENR2_ADC ((uint8_t)0x08) /*!< ADC clock enable */
-#define CLK_PCKENR2_AWU ((uint8_t)0x04) /*!< AWU clock enable */
-
-#define CLK_CSSR_CSSD ((uint8_t)0x08) /*!< Clock security system detection */
-#define CLK_CSSR_CSSDIE ((uint8_t)0x04) /*!< Clock security system detection interrupt enable */
-#define CLK_CSSR_AUX ((uint8_t)0x02) /*!< Auxiliary oscillator connected to master clock */
-#define CLK_CSSR_CSSEN ((uint8_t)0x01) /*!< Clock security system enable */
-
-#define CLK_CCOR_CCOBSY ((uint8_t)0x40) /*!< Configurable clock output busy */
-#define CLK_CCOR_CCORDY ((uint8_t)0x20) /*!< Configurable clock output ready */
-#define CLK_CCOR_CCOSEL ((uint8_t)0x1E) /*!< Configurable clock output selection */
-#define CLK_CCOR_CCOEN ((uint8_t)0x01) /*!< Configurable clock output enable */
-
-#define CLK_HSITRIMR_HSITRIM ((uint8_t)0x07) /*!< High speed internal oscillator trimmer */
-
-#define CLK_SWIMCCR_SWIMDIV ((uint8_t)0x01) /*!< SWIM Clock Dividing Factor */
-
-/**
- * @}
- */
-
-/*----------------------------------------------------------------------------*/
-/**
- * @brief 16-bit timer with complementary PWM outputs (TIM1)
- */
-
-typedef struct TIM1_struct
-{
- __IO uint8_t CR1; /*!< control register 1 */
- __IO uint8_t CR2; /*!< control register 2 */
- __IO uint8_t SMCR; /*!< Synchro mode control register */
- __IO uint8_t ETR; /*!< external trigger register */
- __IO uint8_t IER; /*!< interrupt enable register*/
- __IO uint8_t SR1; /*!< status register 1 */
- __IO uint8_t SR2; /*!< status register 2 */
- __IO uint8_t EGR; /*!< event generation register */
- __IO uint8_t CCMR1; /*!< CC mode register 1 */
- __IO uint8_t CCMR2; /*!< CC mode register 2 */
- __IO uint8_t CCMR3; /*!< CC mode register 3 */
- __IO uint8_t CCMR4; /*!< CC mode register 4 */
- __IO uint8_t CCER1; /*!< CC enable register 1 */
- __IO uint8_t CCER2; /*!< CC enable register 2 */
- __IO uint8_t CNTRH; /*!< counter high */
- __IO uint8_t CNTRL; /*!< counter low */
- __IO uint8_t PSCRH; /*!< prescaler high */
- __IO uint8_t PSCRL; /*!< prescaler low */
- __IO uint8_t ARRH; /*!< auto-reload register high */
- __IO uint8_t ARRL; /*!< auto-reload register low */
- __IO uint8_t RCR; /*!< Repetition Counter register */
- __IO uint8_t CCR1H; /*!< capture/compare register 1 high */
- __IO uint8_t CCR1L; /*!< capture/compare register 1 low */
- __IO uint8_t CCR2H; /*!< capture/compare register 2 high */
- __IO uint8_t CCR2L; /*!< capture/compare register 2 low */
- __IO uint8_t CCR3H; /*!< capture/compare register 3 high */
- __IO uint8_t CCR3L; /*!< capture/compare register 3 low */
- __IO uint8_t CCR4H; /*!< capture/compare register 3 high */
- __IO uint8_t CCR4L; /*!< capture/compare register 3 low */
- __IO uint8_t BKR; /*!< Break Register */
- __IO uint8_t DTR; /*!< dead-time register */
- __IO uint8_t OISR; /*!< Output idle register */
-}
-TIM1_TypeDef;
-
-/** @addtogroup TIM1_Registers_Reset_Value
- * @{
- */
-
-#define TIM1_CR1_RESET_VALUE ((uint8_t)0x00)
-#define TIM1_CR2_RESET_VALUE ((uint8_t)0x00)
-#define TIM1_SMCR_RESET_VALUE ((uint8_t)0x00)
-#define TIM1_ETR_RESET_VALUE ((uint8_t)0x00)
-#define TIM1_IER_RESET_VALUE ((uint8_t)0x00)
-#define TIM1_SR1_RESET_VALUE ((uint8_t)0x00)
-#define TIM1_SR2_RESET_VALUE ((uint8_t)0x00)
-#define TIM1_EGR_RESET_VALUE ((uint8_t)0x00)
-#define TIM1_CCMR1_RESET_VALUE ((uint8_t)0x00)
-#define TIM1_CCMR2_RESET_VALUE ((uint8_t)0x00)
-#define TIM1_CCMR3_RESET_VALUE ((uint8_t)0x00)
-#define TIM1_CCMR4_RESET_VALUE ((uint8_t)0x00)
-#define TIM1_CCER1_RESET_VALUE ((uint8_t)0x00)
-#define TIM1_CCER2_RESET_VALUE ((uint8_t)0x00)
-#define TIM1_CNTRH_RESET_VALUE ((uint8_t)0x00)
-#define TIM1_CNTRL_RESET_VALUE ((uint8_t)0x00)
-#define TIM1_PSCRH_RESET_VALUE ((uint8_t)0x00)
-#define TIM1_PSCRL_RESET_VALUE ((uint8_t)0x00)
-#define TIM1_ARRH_RESET_VALUE ((uint8_t)0xFF)
-#define TIM1_ARRL_RESET_VALUE ((uint8_t)0xFF)
-#define TIM1_RCR_RESET_VALUE ((uint8_t)0x00)
-#define TIM1_CCR1H_RESET_VALUE ((uint8_t)0x00)
-#define TIM1_CCR1L_RESET_VALUE ((uint8_t)0x00)
-#define TIM1_CCR2H_RESET_VALUE ((uint8_t)0x00)
-#define TIM1_CCR2L_RESET_VALUE ((uint8_t)0x00)
-#define TIM1_CCR3H_RESET_VALUE ((uint8_t)0x00)
-#define TIM1_CCR3L_RESET_VALUE ((uint8_t)0x00)
-#define TIM1_CCR4H_RESET_VALUE ((uint8_t)0x00)
-#define TIM1_CCR4L_RESET_VALUE ((uint8_t)0x00)
-#define TIM1_BKR_RESET_VALUE ((uint8_t)0x00)
-#define TIM1_DTR_RESET_VALUE ((uint8_t)0x00)
-#define TIM1_OISR_RESET_VALUE ((uint8_t)0x00)
-
-/**
- * @}
- */
-
-/** @addtogroup TIM1_Registers_Bits_Definition
- * @{
- */
-/* CR1*/
-#define TIM1_CR1_ARPE ((uint8_t)0x80) /*!< Auto-Reload Preload Enable mask. */
-#define TIM1_CR1_CMS ((uint8_t)0x60) /*!< Center-aligned Mode Selection mask. */
-#define TIM1_CR1_DIR ((uint8_t)0x10) /*!< Direction mask. */
-#define TIM1_CR1_OPM ((uint8_t)0x08) /*!< One Pulse Mode mask. */
-#define TIM1_CR1_URS ((uint8_t)0x04) /*!< Update Request Source mask. */
-#define TIM1_CR1_UDIS ((uint8_t)0x02) /*!< Update DIsable mask. */
-#define TIM1_CR1_CEN ((uint8_t)0x01) /*!< Counter Enable mask. */
-/* CR2*/
-#define TIM1_CR2_TI1S ((uint8_t)0x80) /*!< TI1S Selection mask. */
-#define TIM1_CR2_MMS ((uint8_t)0x70) /*!< MMS Selection mask. */
-#define TIM1_CR2_COMS ((uint8_t)0x04) /*!< Capture/Compare Control Update Selection mask. */
-#define TIM1_CR2_CCPC ((uint8_t)0x01) /*!< Capture/Compare Preloaded Control mask. */
-/* SMCR*/
-#define TIM1_SMCR_MSM ((uint8_t)0x80) /*!< Master/Slave Mode mask. */
-#define TIM1_SMCR_TS ((uint8_t)0x70) /*!< Trigger Selection mask. */
-#define TIM1_SMCR_SMS ((uint8_t)0x07) /*!< Slave Mode Selection mask. */
-/*ETR*/
-#define TIM1_ETR_ETP ((uint8_t)0x80) /*!< External Trigger Polarity mask. */
-#define TIM1_ETR_ECE ((uint8_t)0x40)/*!< External Clock mask. */
-#define TIM1_ETR_ETPS ((uint8_t)0x30) /*!< External Trigger Prescaler mask. */
-#define TIM1_ETR_ETF ((uint8_t)0x0F) /*!< External Trigger Filter mask. */
-/*IER*/
-#define TIM1_IER_BIE ((uint8_t)0x80) /*!< Break Interrupt Enable mask. */
-#define TIM1_IER_TIE ((uint8_t)0x40) /*!< Trigger Interrupt Enable mask. */
-#define TIM1_IER_COMIE ((uint8_t)0x20) /*!< Commutation Interrupt Enable mask.*/
-#define TIM1_IER_CC4IE ((uint8_t)0x10) /*!< Capture/Compare 4 Interrupt Enable mask. */
-#define TIM1_IER_CC3IE ((uint8_t)0x08) /*!< Capture/Compare 3 Interrupt Enable mask. */
-#define TIM1_IER_CC2IE ((uint8_t)0x04) /*!< Capture/Compare 2 Interrupt Enable mask. */
-#define TIM1_IER_CC1IE ((uint8_t)0x02) /*!< Capture/Compare 1 Interrupt Enable mask. */
-#define TIM1_IER_UIE ((uint8_t)0x01) /*!< Update Interrupt Enable mask. */
-/*SR1*/
-#define TIM1_SR1_BIF ((uint8_t)0x80) /*!< Break Interrupt Flag mask. */
-#define TIM1_SR1_TIF ((uint8_t)0x40) /*!< Trigger Interrupt Flag mask. */
-#define TIM1_SR1_COMIF ((uint8_t)0x20) /*!< Commutation Interrupt Flag mask. */
-#define TIM1_SR1_CC4IF ((uint8_t)0x10) /*!< Capture/Compare 4 Interrupt Flag mask. */
-#define TIM1_SR1_CC3IF ((uint8_t)0x08) /*!< Capture/Compare 3 Interrupt Flag mask. */
-#define TIM1_SR1_CC2IF ((uint8_t)0x04) /*!< Capture/Compare 2 Interrupt Flag mask. */
-#define TIM1_SR1_CC1IF ((uint8_t)0x02) /*!< Capture/Compare 1 Interrupt Flag mask. */
-#define TIM1_SR1_UIF ((uint8_t)0x01) /*!< Update Interrupt Flag mask. */
-/*SR2*/
-#define TIM1_SR2_CC4OF ((uint8_t)0x10) /*!< Capture/Compare 4 Overcapture Flag mask. */
-#define TIM1_SR2_CC3OF ((uint8_t)0x08) /*!< Capture/Compare 3 Overcapture Flag mask. */
-#define TIM1_SR2_CC2OF ((uint8_t)0x04) /*!< Capture/Compare 2 Overcapture Flag mask. */
-#define TIM1_SR2_CC1OF ((uint8_t)0x02) /*!< Capture/Compare 1 Overcapture Flag mask. */
-/*EGR*/
-#define TIM1_EGR_BG ((uint8_t)0x80) /*!< Break Generation mask. */
-#define TIM1_EGR_TG ((uint8_t)0x40) /*!< Trigger Generation mask. */
-#define TIM1_EGR_COMG ((uint8_t)0x20) /*!< Capture/Compare Control Update Generation mask. */
-#define TIM1_EGR_CC4G ((uint8_t)0x10) /*!< Capture/Compare 4 Generation mask. */
-#define TIM1_EGR_CC3G ((uint8_t)0x08) /*!< Capture/Compare 3 Generation mask. */
-#define TIM1_EGR_CC2G ((uint8_t)0x04) /*!< Capture/Compare 2 Generation mask. */
-#define TIM1_EGR_CC1G ((uint8_t)0x02) /*!< Capture/Compare 1 Generation mask. */
-#define TIM1_EGR_UG ((uint8_t)0x01) /*!< Update Generation mask. */
-/*CCMR*/
-#define TIM1_CCMR_ICxPSC ((uint8_t)0x0C) /*!< Input Capture x Prescaler mask. */
-#define TIM1_CCMR_ICxF ((uint8_t)0xF0) /*!< Input Capture x Filter mask. */
-#define TIM1_CCMR_OCM ((uint8_t)0x70) /*!< Output Compare x Mode mask. */
-#define TIM1_CCMR_OCxPE ((uint8_t)0x08) /*!< Output Compare x Preload Enable mask. */
-#define TIM1_CCMR_OCxFE ((uint8_t)0x04) /*!< Output Compare x Fast Enable mask. */
-#define TIM1_CCMR_CCxS ((uint8_t)0x03) /*!< Capture/Compare x Selection mask. */
-
-#define CCMR_TIxDirect_Set ((uint8_t)0x01)
-/*CCER1*/
-#define TIM1_CCER1_CC2NP ((uint8_t)0x80) /*!< Capture/Compare 2 Complementary output Polarity mask. */
-#define TIM1_CCER1_CC2NE ((uint8_t)0x40) /*!< Capture/Compare 2 Complementary output enable mask. */
-#define TIM1_CCER1_CC2P ((uint8_t)0x20) /*!< Capture/Compare 2 output Polarity mask. */
-#define TIM1_CCER1_CC2E ((uint8_t)0x10) /*!< Capture/Compare 2 output enable mask. */
-#define TIM1_CCER1_CC1NP ((uint8_t)0x08) /*!< Capture/Compare 1 Complementary output Polarity mask. */
-#define TIM1_CCER1_CC1NE ((uint8_t)0x04) /*!< Capture/Compare 1 Complementary output enable mask. */
-#define TIM1_CCER1_CC1P ((uint8_t)0x02) /*!< Capture/Compare 1 output Polarity mask. */
-#define TIM1_CCER1_CC1E ((uint8_t)0x01) /*!< Capture/Compare 1 output enable mask. */
-/*CCER2*/
-#define TIM1_CCER2_CC4P ((uint8_t)0x20) /*!< Capture/Compare 4 output Polarity mask. */
-#define TIM1_CCER2_CC4E ((uint8_t)0x10) /*!< Capture/Compare 4 output enable mask. */
-#define TIM1_CCER2_CC3NP ((uint8_t)0x08) /*!< Capture/Compare 3 Complementary output Polarity mask. */
-#define TIM1_CCER2_CC3NE ((uint8_t)0x04) /*!< Capture/Compare 3 Complementary output enable mask. */
-#define TIM1_CCER2_CC3P ((uint8_t)0x02) /*!< Capture/Compare 3 output Polarity mask. */
-#define TIM1_CCER2_CC3E ((uint8_t)0x01) /*!< Capture/Compare 3 output enable mask. */
-/*CNTRH*/
-#define TIM1_CNTRH_CNT ((uint8_t)0xFF) /*!< Counter Value (MSB) mask. */
-/*CNTRL*/
-#define TIM1_CNTRL_CNT ((uint8_t)0xFF) /*!< Counter Value (LSB) mask. */
-/*PSCH*/
-#define TIM1_PSCH_PSC ((uint8_t)0xFF) /*!< Prescaler Value (MSB) mask. */
-/*PSCL*/
-#define TIM1_PSCL_PSC ((uint8_t)0xFF) /*!< Prescaler Value (LSB) mask. */
-/*ARR*/
-#define TIM1_ARRH_ARR ((uint8_t)0xFF) /*!< Autoreload Value (MSB) mask. */
-#define TIM1_ARRL_ARR ((uint8_t)0xFF) /*!< Autoreload Value (LSB) mask. */
-/*RCR*/
-#define TIM1_RCR_REP ((uint8_t)0xFF) /*!< Repetition Counter Value mask. */
-/*CCR1*/
-#define TIM1_CCR1H_CCR1 ((uint8_t)0xFF) /*!< Capture/Compare 1 Value (MSB) mask. */
-#define TIM1_CCR1L_CCR1 ((uint8_t)0xFF) /*!< Capture/Compare 1 Value (LSB) mask. */
-/*CCR2*/
-#define TIM1_CCR2H_CCR2 ((uint8_t)0xFF) /*!< Capture/Compare 2 Value (MSB) mask. */
-#define TIM1_CCR2L_CCR2 ((uint8_t)0xFF) /*!< Capture/Compare 2 Value (LSB) mask. */
-/*CCR3*/
-#define TIM1_CCR3H_CCR3 ((uint8_t)0xFF) /*!< Capture/Compare 3 Value (MSB) mask. */
-#define TIM1_CCR3L_CCR3 ((uint8_t)0xFF) /*!< Capture/Compare 3 Value (LSB) mask. */
-/*CCR4*/
-#define TIM1_CCR4H_CCR4 ((uint8_t)0xFF) /*!< Capture/Compare 4 Value (MSB) mask. */
-#define TIM1_CCR4L_CCR4 ((uint8_t)0xFF) /*!< Capture/Compare 4 Value (LSB) mask. */
-/*BKR*/
-#define TIM1_BKR_MOE ((uint8_t)0x80) /*!< Main Output Enable mask. */
-#define TIM1_BKR_AOE ((uint8_t)0x40) /*!< Automatic Output Enable mask. */
-#define TIM1_BKR_BKP ((uint8_t)0x20) /*!< Break Polarity mask. */
-#define TIM1_BKR_BKE ((uint8_t)0x10) /*!< Break Enable mask. */
-#define TIM1_BKR_OSSR ((uint8_t)0x08) /*!< Off-State Selection for Run mode mask. */
-#define TIM1_BKR_OSSI ((uint8_t)0x04) /*!< Off-State Selection for Idle mode mask. */
-#define TIM1_BKR_LOCK ((uint8_t)0x03) /*!< Lock Configuration mask. */
-/*DTR*/
-#define TIM1_DTR_DTG ((uint8_t)0xFF) /*!< Dead-Time Generator set-up mask. */
-/*OISR*/
-#define TIM1_OISR_OIS4 ((uint8_t)0x40) /*!< Output Idle state 4 (OC4 output) mask. */
-#define TIM1_OISR_OIS3N ((uint8_t)0x20) /*!< Output Idle state 3 (OC3N output) mask. */
-#define TIM1_OISR_OIS3 ((uint8_t)0x10) /*!< Output Idle state 3 (OC3 output) mask. */
-#define TIM1_OISR_OIS2N ((uint8_t)0x08) /*!< Output Idle state 2 (OC2N output) mask. */
-#define TIM1_OISR_OIS2 ((uint8_t)0x04) /*!< Output Idle state 2 (OC2 output) mask. */
-#define TIM1_OISR_OIS1N ((uint8_t)0x02) /*!< Output Idle state 1 (OC1N output) mask. */
-#define TIM1_OISR_OIS1 ((uint8_t)0x01) /*!< Output Idle state 1 (OC1 output) mask. */
-/**
- * @}
- */
-
-/*----------------------------------------------------------------------------*/
-/**
- * @brief 16-bit timer (TIM2)
- */
-
-typedef struct TIM2_struct
-{
- __IO uint8_t CR1; /*!< control register 1 */
-#if defined(STM8S103) || defined(STM8S003)
- uint8_t RESERVED1; /*!< Reserved register */
- uint8_t RESERVED2; /*!< Reserved register */
-#endif
- __IO uint8_t IER; /*!< interrupt enable register */
- __IO uint8_t SR1; /*!< status register 1 */
- __IO uint8_t SR2; /*!< status register 2 */
- __IO uint8_t EGR; /*!< event generation register */
- __IO uint8_t CCMR1; /*!< CC mode register 1 */
- __IO uint8_t CCMR2; /*!< CC mode register 2 */
- __IO uint8_t CCMR3; /*!< CC mode register 3 */
- __IO uint8_t CCER1; /*!< CC enable register 1 */
- __IO uint8_t CCER2; /*!< CC enable register 2 */
- __IO uint8_t CNTRH; /*!< counter high */
- __IO uint8_t CNTRL; /*!< counter low */
- __IO uint8_t PSCR; /*!< prescaler register */
- __IO uint8_t ARRH; /*!< auto-reload register high */
- __IO uint8_t ARRL; /*!< auto-reload register low */
- __IO uint8_t CCR1H; /*!< capture/compare register 1 high */
- __IO uint8_t CCR1L; /*!< capture/compare register 1 low */
- __IO uint8_t CCR2H; /*!< capture/compare register 2 high */
- __IO uint8_t CCR2L; /*!< capture/compare register 2 low */
- __IO uint8_t CCR3H; /*!< capture/compare register 3 high */
- __IO uint8_t CCR3L; /*!< capture/compare register 3 low */
-}
-TIM2_TypeDef;
-
-/** @addtogroup TIM2_Registers_Reset_Value
- * @{
- */
-
-#define TIM2_CR1_RESET_VALUE ((uint8_t)0x00)
-#define TIM2_IER_RESET_VALUE ((uint8_t)0x00)
-#define TIM2_SR1_RESET_VALUE ((uint8_t)0x00)
-#define TIM2_SR2_RESET_VALUE ((uint8_t)0x00)
-#define TIM2_EGR_RESET_VALUE ((uint8_t)0x00)
-#define TIM2_CCMR1_RESET_VALUE ((uint8_t)0x00)
-#define TIM2_CCMR2_RESET_VALUE ((uint8_t)0x00)
-#define TIM2_CCMR3_RESET_VALUE ((uint8_t)0x00)
-#define TIM2_CCER1_RESET_VALUE ((uint8_t)0x00)
-#define TIM2_CCER2_RESET_VALUE ((uint8_t)0x00)
-#define TIM2_CNTRH_RESET_VALUE ((uint8_t)0x00)
-#define TIM2_CNTRL_RESET_VALUE ((uint8_t)0x00)
-#define TIM2_PSCR_RESET_VALUE ((uint8_t)0x00)
-#define TIM2_ARRH_RESET_VALUE ((uint8_t)0xFF)
-#define TIM2_ARRL_RESET_VALUE ((uint8_t)0xFF)
-#define TIM2_CCR1H_RESET_VALUE ((uint8_t)0x00)
-#define TIM2_CCR1L_RESET_VALUE ((uint8_t)0x00)
-#define TIM2_CCR2H_RESET_VALUE ((uint8_t)0x00)
-#define TIM2_CCR2L_RESET_VALUE ((uint8_t)0x00)
-#define TIM2_CCR3H_RESET_VALUE ((uint8_t)0x00)
-#define TIM2_CCR3L_RESET_VALUE ((uint8_t)0x00)
-
-/**
- * @}
- */
-
-/** @addtogroup TIM2_Registers_Bits_Definition
- * @{
- */
-/*CR1*/
-#define TIM2_CR1_ARPE ((uint8_t)0x80) /*!< Auto-Reload Preload Enable mask. */
-#define TIM2_CR1_OPM ((uint8_t)0x08) /*!< One Pulse Mode mask. */
-#define TIM2_CR1_URS ((uint8_t)0x04) /*!< Update Request Source mask. */
-#define TIM2_CR1_UDIS ((uint8_t)0x02) /*!< Update DIsable mask. */
-#define TIM2_CR1_CEN ((uint8_t)0x01) /*!< Counter Enable mask. */
-/*IER*/
-#define TIM2_IER_CC3IE ((uint8_t)0x08) /*!< Capture/Compare 3 Interrupt Enable mask. */
-#define TIM2_IER_CC2IE ((uint8_t)0x04) /*!< Capture/Compare 2 Interrupt Enable mask. */
-#define TIM2_IER_CC1IE ((uint8_t)0x02) /*!< Capture/Compare 1 Interrupt Enable mask. */
-#define TIM2_IER_UIE ((uint8_t)0x01) /*!< Update Interrupt Enable mask. */
-/*SR1*/
-#define TIM2_SR1_CC3IF ((uint8_t)0x08) /*!< Capture/Compare 3 Interrupt Flag mask. */
-#define TIM2_SR1_CC2IF ((uint8_t)0x04) /*!< Capture/Compare 2 Interrupt Flag mask. */
-#define TIM2_SR1_CC1IF ((uint8_t)0x02) /*!< Capture/Compare 1 Interrupt Flag mask. */
-#define TIM2_SR1_UIF ((uint8_t)0x01) /*!< Update Interrupt Flag mask. */
-/*SR2*/
-#define TIM2_SR2_CC3OF ((uint8_t)0x08) /*!< Capture/Compare 3 Overcapture Flag mask. */
-#define TIM2_SR2_CC2OF ((uint8_t)0x04) /*!< Capture/Compare 2 Overcapture Flag mask. */
-#define TIM2_SR2_CC1OF ((uint8_t)0x02) /*!< Capture/Compare 1 Overcapture Flag mask. */
-/*EGR*/
-#define TIM2_EGR_CC3G ((uint8_t)0x08) /*!< Capture/Compare 3 Generation mask. */
-#define TIM2_EGR_CC2G ((uint8_t)0x04) /*!< Capture/Compare 2 Generation mask. */
-#define TIM2_EGR_CC1G ((uint8_t)0x02) /*!< Capture/Compare 1 Generation mask. */
-#define TIM2_EGR_UG ((uint8_t)0x01) /*!< Update Generation mask. */
-/*CCMR*/
-#define TIM2_CCMR_ICxPSC ((uint8_t)0x0C) /*!< Input Capture x Prescaler mask. */
-#define TIM2_CCMR_ICxF ((uint8_t)0xF0) /*!< Input Capture x Filter mask. */
-#define TIM2_CCMR_OCM ((uint8_t)0x70) /*!< Output Compare x Mode mask. */
-#define TIM2_CCMR_OCxPE ((uint8_t)0x08) /*!< Output Compare x Preload Enable mask. */
-#define TIM2_CCMR_CCxS ((uint8_t)0x03) /*!< Capture/Compare x Selection mask. */
-/*CCER1*/
-#define TIM2_CCER1_CC2P ((uint8_t)0x20) /*!< Capture/Compare 2 output Polarity mask. */
-#define TIM2_CCER1_CC2E ((uint8_t)0x10) /*!< Capture/Compare 2 output enable mask. */
-#define TIM2_CCER1_CC1P ((uint8_t)0x02) /*!< Capture/Compare 1 output Polarity mask. */
-#define TIM2_CCER1_CC1E ((uint8_t)0x01) /*!< Capture/Compare 1 output enable mask. */
-/*CCER2*/
-#define TIM2_CCER2_CC3P ((uint8_t)0x02) /*!< Capture/Compare 3 output Polarity mask. */
-#define TIM2_CCER2_CC3E ((uint8_t)0x01) /*!< Capture/Compare 3 output enable mask. */
-/*CNTR*/
-#define TIM2_CNTRH_CNT ((uint8_t)0xFF) /*!< Counter Value (MSB) mask. */
-#define TIM2_CNTRL_CNT ((uint8_t)0xFF) /*!< Counter Value (LSB) mask. */
-/*PSCR*/
-#define TIM2_PSCR_PSC ((uint8_t)0xFF) /*!< Prescaler Value (MSB) mask. */
-/*ARR*/
-#define TIM2_ARRH_ARR ((uint8_t)0xFF) /*!< Autoreload Value (MSB) mask. */
-#define TIM2_ARRL_ARR ((uint8_t)0xFF) /*!< Autoreload Value (LSB) mask. */
-/*CCR1*/
-#define TIM2_CCR1H_CCR1 ((uint8_t)0xFF) /*!< Capture/Compare 1 Value (MSB) mask. */
-#define TIM2_CCR1L_CCR1 ((uint8_t)0xFF) /*!< Capture/Compare 1 Value (LSB) mask. */
-/*CCR2*/
-#define TIM2_CCR2H_CCR2 ((uint8_t)0xFF) /*!< Capture/Compare 2 Value (MSB) mask. */
-#define TIM2_CCR2L_CCR2 ((uint8_t)0xFF) /*!< Capture/Compare 2 Value (LSB) mask. */
-/*CCR3*/
-#define TIM2_CCR3H_CCR3 ((uint8_t)0xFF) /*!< Capture/Compare 3 Value (MSB) mask. */
-#define TIM2_CCR3L_CCR3 ((uint8_t)0xFF) /*!< Capture/Compare 3 Value (LSB) mask. */
-
-/**
- * @}
- */
-
-/*----------------------------------------------------------------------------*/
-/**
- * @brief 16-bit timer (TIM3)
- */
-typedef struct TIM3_struct
-{
- __IO uint8_t CR1; /*!< control register 1 */
- __IO uint8_t IER; /*!< interrupt enable register */
- __IO uint8_t SR1; /*!< status register 1 */
- __IO uint8_t SR2; /*!< status register 2 */
- __IO uint8_t EGR; /*!< event generation register */
- __IO uint8_t CCMR1; /*!< CC mode register 1 */
- __IO uint8_t CCMR2; /*!< CC mode register 2 */
- __IO uint8_t CCER1; /*!< CC enable register 1 */
- __IO uint8_t CNTRH; /*!< counter high */
- __IO uint8_t CNTRL; /*!< counter low */
- __IO uint8_t PSCR; /*!< prescaler register */
- __IO uint8_t ARRH; /*!< auto-reload register high */
- __IO uint8_t ARRL; /*!< auto-reload register low */
- __IO uint8_t CCR1H; /*!< capture/compare register 1 high */
- __IO uint8_t CCR1L; /*!< capture/compare register 1 low */
- __IO uint8_t CCR2H; /*!< capture/compare register 2 high */
- __IO uint8_t CCR2L; /*!< capture/compare register 2 low */
-}
-TIM3_TypeDef;
-
-/** @addtogroup TIM3_Registers_Reset_Value
- * @{
- */
-
-#define TIM3_CR1_RESET_VALUE ((uint8_t)0x00)
-#define TIM3_IER_RESET_VALUE ((uint8_t)0x00)
-#define TIM3_SR1_RESET_VALUE ((uint8_t)0x00)
-#define TIM3_SR2_RESET_VALUE ((uint8_t)0x00)
-#define TIM3_EGR_RESET_VALUE ((uint8_t)0x00)
-#define TIM3_CCMR1_RESET_VALUE ((uint8_t)0x00)
-#define TIM3_CCMR2_RESET_VALUE ((uint8_t)0x00)
-#define TIM3_CCER1_RESET_VALUE ((uint8_t)0x00)
-#define TIM3_CNTRH_RESET_VALUE ((uint8_t)0x00)
-#define TIM3_CNTRL_RESET_VALUE ((uint8_t)0x00)
-#define TIM3_PSCR_RESET_VALUE ((uint8_t)0x00)
-#define TIM3_ARRH_RESET_VALUE ((uint8_t)0xFF)
-#define TIM3_ARRL_RESET_VALUE ((uint8_t)0xFF)
-#define TIM3_CCR1H_RESET_VALUE ((uint8_t)0x00)
-#define TIM3_CCR1L_RESET_VALUE ((uint8_t)0x00)
-#define TIM3_CCR2H_RESET_VALUE ((uint8_t)0x00)
-#define TIM3_CCR2L_RESET_VALUE ((uint8_t)0x00)
-
-/**
- * @}
- */
-
-/** @addtogroup TIM3_Registers_Bits_Definition
- * @{
- */
-/*CR1*/
-#define TIM3_CR1_ARPE ((uint8_t)0x80) /*!< Auto-Reload Preload Enable mask. */
-#define TIM3_CR1_OPM ((uint8_t)0x08) /*!< One Pulse Mode mask. */
-#define TIM3_CR1_URS ((uint8_t)0x04) /*!< Update Request Source mask. */
-#define TIM3_CR1_UDIS ((uint8_t)0x02) /*!< Update DIsable mask. */
-#define TIM3_CR1_CEN ((uint8_t)0x01) /*!< Counter Enable mask. */
-/*IER*/
-#define TIM3_IER_CC2IE ((uint8_t)0x04) /*!< Capture/Compare 2 Interrupt Enable mask. */
-#define TIM3_IER_CC1IE ((uint8_t)0x02) /*!< Capture/Compare 1 Interrupt Enable mask. */
-#define TIM3_IER_UIE ((uint8_t)0x01) /*!< Update Interrupt Enable mask. */
-/*SR1*/
-#define TIM3_SR1_CC2IF ((uint8_t)0x04) /*!< Capture/Compare 2 Interrupt Flag mask. */
-#define TIM3_SR1_CC1IF ((uint8_t)0x02) /*!< Capture/Compare 1 Interrupt Flag mask. */
-#define TIM3_SR1_UIF ((uint8_t)0x01) /*!< Update Interrupt Flag mask. */
-/*SR2*/
-#define TIM3_SR2_CC2OF ((uint8_t)0x04) /*!< Capture/Compare 2 Overcapture Flag mask. */
-#define TIM3_SR2_CC1OF ((uint8_t)0x02) /*!< Capture/Compare 1 Overcapture Flag mask. */
-/*EGR*/
-#define TIM3_EGR_CC2G ((uint8_t)0x04) /*!< Capture/Compare 2 Generation mask. */
-#define TIM3_EGR_CC1G ((uint8_t)0x02) /*!< Capture/Compare 1 Generation mask. */
-#define TIM3_EGR_UG ((uint8_t)0x01) /*!< Update Generation mask. */
-/*CCMR*/
-#define TIM3_CCMR_ICxPSC ((uint8_t)0x0C) /*!< Input Capture x Prescaler mask. */
-#define TIM3_CCMR_ICxF ((uint8_t)0xF0) /*!< Input Capture x Filter mask. */
-#define TIM3_CCMR_OCM ((uint8_t)0x70) /*!< Output Compare x Mode mask. */
-#define TIM3_CCMR_OCxPE ((uint8_t)0x08) /*!< Output Compare x Preload Enable mask. */
-#define TIM3_CCMR_CCxS ((uint8_t)0x03) /*!< Capture/Compare x Selection mask. */
-/*CCER1*/
-#define TIM3_CCER1_CC2P ((uint8_t)0x20) /*!< Capture/Compare 2 output Polarity mask. */
-#define TIM3_CCER1_CC2E ((uint8_t)0x10) /*!< Capture/Compare 2 output enable mask. */
-#define TIM3_CCER1_CC1P ((uint8_t)0x02) /*!< Capture/Compare 1 output Polarity mask. */
-#define TIM3_CCER1_CC1E ((uint8_t)0x01) /*!< Capture/Compare 1 output enable mask. */
-/*CNTR*/
-#define TIM3_CNTRH_CNT ((uint8_t)0xFF) /*!< Counter Value (MSB) mask. */
-#define TIM3_CNTRL_CNT ((uint8_t)0xFF) /*!< Counter Value (LSB) mask. */
-/*PSCR*/
-#define TIM3_PSCR_PSC ((uint8_t)0xFF) /*!< Prescaler Value (MSB) mask. */
-/*ARR*/
-#define TIM3_ARRH_ARR ((uint8_t)0xFF) /*!< Autoreload Value (MSB) mask. */
-#define TIM3_ARRL_ARR ((uint8_t)0xFF) /*!< Autoreload Value (LSB) mask. */
-/*CCR1*/
-#define TIM3_CCR1H_CCR1 ((uint8_t)0xFF) /*!< Capture/Compare 1 Value (MSB) mask. */
-#define TIM3_CCR1L_CCR1 ((uint8_t)0xFF) /*!< Capture/Compare 1 Value (LSB) mask. */
-/*CCR2*/
-#define TIM3_CCR2H_CCR2 ((uint8_t)0xFF) /*!< Capture/Compare 2 Value (MSB) mask. */
-#define TIM3_CCR2L_CCR2 ((uint8_t)0xFF) /*!< Capture/Compare 2 Value (LSB) mask. */
-/**
- * @}
- */
-
-/*----------------------------------------------------------------------------*/
-/**
- * @brief 8-bit system timer (TIM4)
- */
-
-typedef struct TIM4_struct
-{
- __IO uint8_t CR1; /*!< control register 1 */
-#if defined(STM8S103) || defined(STM8S003)
- uint8_t RESERVED1; /*!< Reserved register */
- uint8_t RESERVED2; /*!< Reserved register */
-#endif
- __IO uint8_t IER; /*!< interrupt enable register */
- __IO uint8_t SR1; /*!< status register 1 */
- __IO uint8_t EGR; /*!< event generation register */
- __IO uint8_t CNTR; /*!< counter register */
- __IO uint8_t PSCR; /*!< prescaler register */
- __IO uint8_t ARR; /*!< auto-reload register */
-}
-TIM4_TypeDef;
-
-/** @addtogroup TIM4_Registers_Reset_Value
- * @{
- */
-
-#define TIM4_CR1_RESET_VALUE ((uint8_t)0x00)
-#define TIM4_IER_RESET_VALUE ((uint8_t)0x00)
-#define TIM4_SR1_RESET_VALUE ((uint8_t)0x00)
-#define TIM4_EGR_RESET_VALUE ((uint8_t)0x00)
-#define TIM4_CNTR_RESET_VALUE ((uint8_t)0x00)
-#define TIM4_PSCR_RESET_VALUE ((uint8_t)0x00)
-#define TIM4_ARR_RESET_VALUE ((uint8_t)0xFF)
-
-/**
- * @}
- */
-
-/** @addtogroup TIM4_Registers_Bits_Definition
- * @{
- */
-/*CR1*/
-#define TIM4_CR1_ARPE ((uint8_t)0x80) /*!< Auto-Reload Preload Enable mask. */
-#define TIM4_CR1_OPM ((uint8_t)0x08) /*!< One Pulse Mode mask. */
-#define TIM4_CR1_URS ((uint8_t)0x04) /*!< Update Request Source mask. */
-#define TIM4_CR1_UDIS ((uint8_t)0x02) /*!< Update DIsable mask. */
-#define TIM4_CR1_CEN ((uint8_t)0x01) /*!< Counter Enable mask. */
-/*IER*/
-#define TIM4_IER_UIE ((uint8_t)0x01) /*!< Update Interrupt Enable mask. */
-/*SR1*/
-#define TIM4_SR1_UIF ((uint8_t)0x01) /*!< Update Interrupt Flag mask. */
-/*EGR*/
-#define TIM4_EGR_UG ((uint8_t)0x01) /*!< Update Generation mask. */
-/*CNTR*/
-#define TIM4_CNTR_CNT ((uint8_t)0xFF) /*!< Counter Value (LSB) mask. */
-/*PSCR*/
-#define TIM4_PSCR_PSC ((uint8_t)0x07) /*!< Prescaler Value mask. */
-/*ARR*/
-#define TIM4_ARR_ARR ((uint8_t)0xFF) /*!< Autoreload Value mask. */
-
-/**
- * @}
- */
-
-/*----------------------------------------------------------------------------*/
-/**
- * @brief 16-bit timer with synchro module (TIM5)
- */
-
-typedef struct TIM5_struct
-{
- __IO uint8_t CR1; /*!<TIM5 Control Register 1 */
- __IO uint8_t CR2; /*!<TIM5 Control Register 2 */
- __IO uint8_t SMCR; /*!<TIM5 Slave Mode Control Register */
- __IO uint8_t IER; /*!<TIM5 Interrupt Enable Register */
- __IO uint8_t SR1; /*!<TIM5 Status Register 1 */
- __IO uint8_t SR2; /*!<TIM5 Status Register 2 */
- __IO uint8_t EGR; /*!<TIM5 Event Generation Register */
- __IO uint8_t CCMR1; /*!<TIM5 Capture/Compare Mode Register 1 */
- __IO uint8_t CCMR2; /*!<TIM5 Capture/Compare Mode Register 2 */
- __IO uint8_t CCMR3; /*!<TIM5 Capture/Compare Mode Register 3 */
- __IO uint8_t CCER1; /*!<TIM5 Capture/Compare Enable Register 1 */
- __IO uint8_t CCER2; /*!<TIM5 Capture/Compare Enable Register 2 */
- __IO uint8_t CNTRH; /*!<TIM5 Counter High */
- __IO uint8_t CNTRL; /*!<TIM5 Counter Low */
- __IO uint8_t PSCR; /*!<TIM5 Prescaler Register */
- __IO uint8_t ARRH; /*!<TIM5 Auto-Reload Register High */
- __IO uint8_t ARRL; /*!<TIM5 Auto-Reload Register Low */
- __IO uint8_t CCR1H; /*!<TIM5 Capture/Compare Register 1 High */
- __IO uint8_t CCR1L; /*!<TIM5 Capture/Compare Register 1 Low */
- __IO uint8_t CCR2H; /*!<TIM5 Capture/Compare Register 2 High */
- __IO uint8_t CCR2L; /*!<TIM5 Capture/Compare Register 2 Low */
- __IO uint8_t CCR3H; /*!<TIM5 Capture/Compare Register 3 High */
- __IO uint8_t CCR3L; /*!<TIM5 Capture/Compare Register 3 Low */
-}TIM5_TypeDef;
-
-/** @addtogroup TIM5_Registers_Reset_Value
- * @{
- */
-
-#define TIM5_CR1_RESET_VALUE ((uint8_t)0x00)
-#define TIM5_CR2_RESET_VALUE ((uint8_t)0x00)
-#define TIM5_SMCR_RESET_VALUE ((uint8_t)0x00)
-#define TIM5_IER_RESET_VALUE ((uint8_t)0x00)
-#define TIM5_SR1_RESET_VALUE ((uint8_t)0x00)
-#define TIM5_SR2_RESET_VALUE ((uint8_t)0x00)
-#define TIM5_EGR_RESET_VALUE ((uint8_t)0x00)
-#define TIM5_CCMR1_RESET_VALUE ((uint8_t)0x00)
-#define TIM5_CCMR2_RESET_VALUE ((uint8_t)0x00)
-#define TIM5_CCMR3_RESET_VALUE ((uint8_t)0x00)
-#define TIM5_CCER1_RESET_VALUE ((uint8_t)0x00)
-#define TIM5_CCER2_RESET_VALUE ((uint8_t)0x00)
-#define TIM5_CNTRH_RESET_VALUE ((uint8_t)0x00)
-#define TIM5_CNTRL_RESET_VALUE ((uint8_t)0x00)
-#define TIM5_PSCR_RESET_VALUE ((uint8_t)0x00)
-#define TIM5_ARRH_RESET_VALUE ((uint8_t)0xFF)
-#define TIM5_ARRL_RESET_VALUE ((uint8_t)0xFF)
-#define TIM5_CCR1H_RESET_VALUE ((uint8_t)0x00)
-#define TIM5_CCR1L_RESET_VALUE ((uint8_t)0x00)
-#define TIM5_CCR2H_RESET_VALUE ((uint8_t)0x00)
-#define TIM5_CCR2L_RESET_VALUE ((uint8_t)0x00)
-#define TIM5_CCR3H_RESET_VALUE ((uint8_t)0x00)
-#define TIM5_CCR3L_RESET_VALUE ((uint8_t)0x00)
-
-/**
- * @}
- */
-
-/** @addtogroup TIM5_Registers_Bits_Definition
- * @{
- */
-/* CR1*/
-#define TIM5_CR1_ARPE ((uint8_t)0x80) /*!< Auto-Reload Preload Enable mask. */
-#define TIM5_CR1_OPM ((uint8_t)0x08) /*!< One Pulse Mode mask. */
-#define TIM5_CR1_URS ((uint8_t)0x04) /*!< Update Request Source mask. */
-#define TIM5_CR1_UDIS ((uint8_t)0x02) /*!< Update DIsable mask. */
-#define TIM5_CR1_CEN ((uint8_t)0x01) /*!< Counter Enable mask. */
-/* CR2*/
-#define TIM5_CR2_TI1S ((uint8_t)0x80) /*!< TI1S Selection Mask. */
-#define TIM5_CR2_MMS ((uint8_t)0x70) /*!< MMS Selection Mask. */
-/* SMCR*/
-#define TIM5_SMCR_MSM ((uint8_t)0x80) /*!< Master/Slave Mode Mask. */
-#define TIM5_SMCR_TS ((uint8_t)0x70) /*!< Trigger Selection Mask. */
-#define TIM5_SMCR_SMS ((uint8_t)0x07) /*!< Slave Mode Selection Mask. */
-/*IER*/
-#define TIM5_IER_TIE ((uint8_t)0x40) /*!< Trigger Interrupt Enable mask. */
-#define TIM5_IER_CC3IE ((uint8_t)0x08) /*!< Capture/Compare 3 Interrupt Enable mask. */
-#define TIM5_IER_CC2IE ((uint8_t)0x04) /*!< Capture/Compare 2 Interrupt Enable mask. */
-#define TIM5_IER_CC1IE ((uint8_t)0x02) /*!< Capture/Compare 1 Interrupt Enable mask. */
-#define TIM5_IER_UIE ((uint8_t)0x01) /*!< Update Interrupt Enable mask. */
-/*SR1*/
-#define TIM5_SR1_TIF ((uint8_t)0x40) /*!< Trigger Interrupt Flag mask. */
-#define TIM5_SR1_CC3IF ((uint8_t)0x08) /*!< Capture/Compare 3 Interrupt Flag mask. */
-#define TIM5_SR1_CC2IF ((uint8_t)0x04) /*!< Capture/Compare 2 Interrupt Flag mask. */
-#define TIM5_SR1_CC1IF ((uint8_t)0x02) /*!< Capture/Compare 1 Interrupt Flag mask. */
-#define TIM5_SR1_UIF ((uint8_t)0x01) /*!< Update Interrupt Flag mask. */
-/*SR2*/
-#define TIM5_SR2_CC3OF ((uint8_t)0x08) /*!< Capture/Compare 3 Overcapture Flag mask. */
-#define TIM5_SR2_CC2OF ((uint8_t)0x04) /*!< Capture/Compare 2 Overcapture Flag mask. */
-#define TIM5_SR2_CC1OF ((uint8_t)0x02) /*!< Capture/Compare 1 Overcapture Flag mask. */
-/*EGR*/
-#define TIM5_EGR_TG ((uint8_t)0x40) /*!< Trigger Generation mask. */
-#define TIM5_EGR_CC3G ((uint8_t)0x08) /*!< Capture/Compare 3 Generation mask. */
-#define TIM5_EGR_CC2G ((uint8_t)0x04) /*!< Capture/Compare 2 Generation mask. */
-#define TIM5_EGR_CC1G ((uint8_t)0x02) /*!< Capture/Compare 1 Generation mask. */
-#define TIM5_EGR_UG ((uint8_t)0x01) /*!< Update Generation mask. */
-/*CCMR*/
-#define TIM5_CCMR_ICxPSC ((uint8_t)0x0C) /*!< Input Capture x Prescaler mask. */
-#define TIM5_CCMR_ICxF ((uint8_t)0xF0) /*!< Input Capture x Filter mask. */
-#define TIM5_CCMR_OCM ((uint8_t)0x70) /*!< Output Compare x Mode mask. */
-#define TIM5_CCMR_OCxPE ((uint8_t)0x08) /*!< Output Compare x Preload Enable mask. */
-#define TIM5_CCMR_CCxS ((uint8_t)0x03) /*!< Capture/Compare x Selection mask. */
-/*CCER1*/
-#define TIM5_CCER1_CC2P ((uint8_t)0x20) /*!< Capture/Compare 2 output Polarity mask. */
-#define TIM5_CCER1_CC2E ((uint8_t)0x10) /*!< Capture/Compare 2 output enable mask. */
-#define TIM5_CCER1_CC1P ((uint8_t)0x02) /*!< Capture/Compare 1 output Polarity mask. */
-#define TIM5_CCER1_CC1E ((uint8_t)0x01) /*!< Capture/Compare 1 output enable mask. */
-/*CCER2*/
-#define TIM5_CCER2_CC3P ((uint8_t)0x02) /*!< Capture/Compare 3 output Polarity mask. */
-#define TIM5_CCER2_CC3E ((uint8_t)0x01) /*!< Capture/Compare 3 output enable mask. */
-/*CNTR*/
-#define TIM5_CNTRH_CNT ((uint8_t)0xFF) /*!< Counter Value (MSB) mask. */
-#define TIM5_CNTRL_CNT ((uint8_t)0xFF) /*!< Counter Value (LSB) mask. */
-/*PSCR*/
-#define TIM5_PSCR_PSC ((uint8_t)0xFF) /*!< Prescaler Value (MSB) mask. */
-/*ARR*/
-#define TIM5_ARRH_ARR ((uint8_t)0xFF) /*!< Autoreload Value (MSB) mask. */
-#define TIM5_ARRL_ARR ((uint8_t)0xFF) /*!< Autoreload Value (LSB) mask. */
-/*CCR1*/
-#define TIM5_CCR1H_CCR1 ((uint8_t)0xFF) /*!< Capture/Compare 1 Value (MSB) mask. */
-#define TIM5_CCR1L_CCR1 ((uint8_t)0xFF) /*!< Capture/Compare 1 Value (LSB) mask. */
-/*CCR2*/
-#define TIM5_CCR2H_CCR2 ((uint8_t)0xFF) /*!< Capture/Compare 2 Value (MSB) mask. */
-#define TIM5_CCR2L_CCR2 ((uint8_t)0xFF) /*!< Capture/Compare 2 Value (LSB) mask. */
-/*CCR3*/
-#define TIM5_CCR3H_CCR3 ((uint8_t)0xFF) /*!< Capture/Compare 3 Value (MSB) mask. */
-#define TIM5_CCR3L_CCR3 ((uint8_t)0xFF) /*!< Capture/Compare 3 Value (LSB) mask. */
-/*CCMR*/
-#define TIM5_CCMR_TIxDirect_Set ((uint8_t)0x01)
-/**
- * @}
- */
-
-/*----------------------------------------------------------------------------*/
-/**
- * @brief 8-bit system timer with synchro module(TIM6)
- */
-
-typedef struct TIM6_struct
-{
- __IO uint8_t CR1; /*!< control register 1 */
- __IO uint8_t CR2; /*!< control register 2 */
- __IO uint8_t SMCR; /*!< Synchro mode control register */
- __IO uint8_t IER; /*!< interrupt enable register */
- __IO uint8_t SR1; /*!< status register 1 */
- __IO uint8_t EGR; /*!< event generation register */
- __IO uint8_t CNTR; /*!< counter register */
- __IO uint8_t PSCR; /*!< prescaler register */
- __IO uint8_t ARR; /*!< auto-reload register */
-}
-TIM6_TypeDef;
-/** @addtogroup TIM6_Registers_Reset_Value
- * @{
- */
-#define TIM6_CR1_RESET_VALUE ((uint8_t)0x00)
-#define TIM6_CR2_RESET_VALUE ((uint8_t)0x00)
-#define TIM6_SMCR_RESET_VALUE ((uint8_t)0x00)
-#define TIM6_IER_RESET_VALUE ((uint8_t)0x00)
-#define TIM6_SR1_RESET_VALUE ((uint8_t)0x00)
-#define TIM6_EGR_RESET_VALUE ((uint8_t)0x00)
-#define TIM6_CNTR_RESET_VALUE ((uint8_t)0x00)
-#define TIM6_PSCR_RESET_VALUE ((uint8_t)0x00)
-#define TIM6_ARR_RESET_VALUE ((uint8_t)0xFF)
-
-/**
-* @}
-*/
-
-/** @addtogroup TIM6_Registers_Bits_Definition
- * @{
- */
-/* CR1*/
-#define TIM6_CR1_ARPE ((uint8_t)0x80) /*!< Auto-Reload Preload Enable Mask. */
-#define TIM6_CR1_OPM ((uint8_t)0x08) /*!< One Pulse Mode Mask. */
-#define TIM6_CR1_URS ((uint8_t)0x04) /*!< Update Request Source Mask. */
-#define TIM6_CR1_UDIS ((uint8_t)0x02) /*!< Update DIsable Mask. */
-#define TIM6_CR1_CEN ((uint8_t)0x01) /*!< Counter Enable Mask. */
-/* CR2*/
-#define TIM6_CR2_MMS ((uint8_t)0x70) /*!< MMS Selection Mask. */
-/* SMCR*/
-#define TIM6_SMCR_MSM ((uint8_t)0x80) /*!< Master/Slave Mode Mask. */
-#define TIM6_SMCR_TS ((uint8_t)0x70) /*!< Trigger Selection Mask. */
-#define TIM6_SMCR_SMS ((uint8_t)0x07) /*!< Slave Mode Selection Mask. */
-/* IER*/
-#define TIM6_IER_TIE ((uint8_t)0x40) /*!< Trigger Interrupt Enable Mask. */
-#define TIM6_IER_UIE ((uint8_t)0x01) /*!< Update Interrupt Enable Mask. */
-/* SR1*/
-#define TIM6_SR1_TIF ((uint8_t)0x40) /*!< Trigger Interrupt Flag mask. */
-#define TIM6_SR1_UIF ((uint8_t)0x01) /*!< Update Interrupt Flag Mask. */
-/* EGR*/
-#define TIM6_EGR_TG ((uint8_t)0x40) /*!< Trigger Generation mask. */
-#define TIM6_EGR_UG ((uint8_t)0x01) /*!< Update Generation Mask. */
-/* CNTR*/
-#define TIM6_CNTR_CNT ((uint8_t)0xFF) /*!<Counter Value (LSB) Mask. */
-/* PSCR*/
-#define TIM6_PSCR_PSC ((uint8_t)0x07) /*!<Prescaler Value Mask. */
-
-#define TIM6_ARR_ARR ((uint8_t)0xFF) /*!<Autoreload Value Mask. */
-/**
- * @}
- */
-/*----------------------------------------------------------------------------*/
-/**
- * @brief Inter-Integrated Circuit (I2C)
- */
-
-typedef struct I2C_struct
-{
- __IO uint8_t CR1; /*!< I2C control register 1 */
- __IO uint8_t CR2; /*!< I2C control register 2 */
- __IO uint8_t FREQR; /*!< I2C frequency register */
- __IO uint8_t OARL; /*!< I2C own address register LSB */
- __IO uint8_t OARH; /*!< I2C own address register MSB */
- uint8_t RESERVED1; /*!< Reserved byte */
- __IO uint8_t DR; /*!< I2C data register */
- __IO uint8_t SR1; /*!< I2C status register 1 */
- __IO uint8_t SR2; /*!< I2C status register 2 */
- __IO uint8_t SR3; /*!< I2C status register 3 */
- __IO uint8_t ITR; /*!< I2C interrupt register */
- __IO uint8_t CCRL; /*!< I2C clock control register low */
- __IO uint8_t CCRH; /*!< I2C clock control register high */
- __IO uint8_t TRISER; /*!< I2C maximum rise time register */
- uint8_t RESERVED2; /*!< Reserved byte */
-}
-I2C_TypeDef;
-
-/** @addtogroup I2C_Registers_Reset_Value
- * @{
- */
-
-#define I2C_CR1_RESET_VALUE ((uint8_t)0x00)
-#define I2C_CR2_RESET_VALUE ((uint8_t)0x00)
-#define I2C_FREQR_RESET_VALUE ((uint8_t)0x00)
-#define I2C_OARL_RESET_VALUE ((uint8_t)0x00)
-#define I2C_OARH_RESET_VALUE ((uint8_t)0x00)
-#define I2C_DR_RESET_VALUE ((uint8_t)0x00)
-#define I2C_SR1_RESET_VALUE ((uint8_t)0x00)
-#define I2C_SR2_RESET_VALUE ((uint8_t)0x00)
-#define I2C_SR3_RESET_VALUE ((uint8_t)0x00)
-#define I2C_ITR_RESET_VALUE ((uint8_t)0x00)
-#define I2C_CCRL_RESET_VALUE ((uint8_t)0x00)
-#define I2C_CCRH_RESET_VALUE ((uint8_t)0x00)
-#define I2C_TRISER_RESET_VALUE ((uint8_t)0x02)
-
-/**
- * @}
- */
-
-/** @addtogroup I2C_Registers_Bits_Definition
- * @{
- */
-
-#define I2C_CR1_NOSTRETCH ((uint8_t)0x80) /*!< Clock Stretching Disable (Slave mode) */
-#define I2C_CR1_ENGC ((uint8_t)0x40) /*!< General Call Enable */
-#define I2C_CR1_PE ((uint8_t)0x01) /*!< Peripheral Enable */
-
-#define I2C_CR2_SWRST ((uint8_t)0x80) /*!< Software Reset */
-#define I2C_CR2_POS ((uint8_t)0x08) /*!< Acknowledge */
-#define I2C_CR2_ACK ((uint8_t)0x04) /*!< Acknowledge Enable */
-#define I2C_CR2_STOP ((uint8_t)0x02) /*!< Stop Generation */
-#define I2C_CR2_START ((uint8_t)0x01) /*!< Start Generation */
-
-#define I2C_FREQR_FREQ ((uint8_t)0x3F) /*!< Peripheral Clock Frequency */
-
-#define I2C_OARL_ADD ((uint8_t)0xFE) /*!< Interface Address bits [7..1] */
-#define I2C_OARL_ADD0 ((uint8_t)0x01) /*!< Interface Address bit0 */
-
-#define I2C_OARH_ADDMODE ((uint8_t)0x80) /*!< Addressing Mode (Slave mode) */
-#define I2C_OARH_ADDCONF ((uint8_t)0x40) /*!< Address Mode Configuration */
-#define I2C_OARH_ADD ((uint8_t)0x06) /*!< Interface Address bits [9..8] */
-
-#define I2C_DR_DR ((uint8_t)0xFF) /*!< Data Register */
-
-#define I2C_SR1_TXE ((uint8_t)0x80) /*!< Data Register Empty (transmitters) */
-#define I2C_SR1_RXNE ((uint8_t)0x40) /*!< Data Register not Empty (receivers) */
-#define I2C_SR1_STOPF ((uint8_t)0x10) /*!< Stop detection (Slave mode) */
-#define I2C_SR1_ADD10 ((uint8_t)0x08) /*!< 10-bit header sent (Master mode) */
-#define I2C_SR1_BTF ((uint8_t)0x04) /*!< Byte Transfer Finished */
-#define I2C_SR1_ADDR ((uint8_t)0x02) /*!< Address sent (master mode)/matched (slave mode) */
-#define I2C_SR1_SB ((uint8_t)0x01) /*!< Start Bit (Master mode) */
-
-#define I2C_SR2_WUFH ((uint8_t)0x20) /*!< Wake-up from Halt */
-#define I2C_SR2_OVR ((uint8_t)0x08) /*!< Overrun/Underrun */
-#define I2C_SR2_AF ((uint8_t)0x04) /*!< Acknowledge Failure */
-#define I2C_SR2_ARLO ((uint8_t)0x02) /*!< Arbitration Lost (master mode) */
-#define I2C_SR2_BERR ((uint8_t)0x01) /*!< Bus Error */
-
-#define I2C_SR3_GENCALL ((uint8_t)0x10) /*!< General Call Header (Slave mode) */
-#define I2C_SR3_TRA ((uint8_t)0x04) /*!< Transmitter/Receiver */
-#define I2C_SR3_BUSY ((uint8_t)0x02) /*!< Bus Busy */
-#define I2C_SR3_MSL ((uint8_t)0x01) /*!< Master/Slave */
-
-#define I2C_ITR_ITBUFEN ((uint8_t)0x04) /*!< Buffer Interrupt Enable */
-#define I2C_ITR_ITEVTEN ((uint8_t)0x02) /*!< Event Interrupt Enable */
-#define I2C_ITR_ITERREN ((uint8_t)0x01) /*!< Error Interrupt Enable */
-
-#define I2C_CCRL_CCR ((uint8_t)0xFF) /*!< Clock Control Register (Master mode) */
-
-#define I2C_CCRH_FS ((uint8_t)0x80) /*!< Master Mode Selection */
-#define I2C_CCRH_DUTY ((uint8_t)0x40) /*!< Fast Mode Duty Cycle */
-#define I2C_CCRH_CCR ((uint8_t)0x0F) /*!< Clock Control Register in Fast/Standard mode (Master mode) bits [11..8] */
-
-#define I2C_TRISER_TRISE ((uint8_t)0x3F) /*!< Maximum Rise Time in Fast/Standard mode (Master mode) */
-
-/**
- * @}
- */
-
-/*----------------------------------------------------------------------------*/
-/**
- * @brief Interrupt Controller (ITC)
- */
-
-typedef struct ITC_struct
-{
- __IO uint8_t ISPR1; /*!< Interrupt Software Priority register 1 */
- __IO uint8_t ISPR2; /*!< Interrupt Software Priority register 2 */
- __IO uint8_t ISPR3; /*!< Interrupt Software Priority register 3 */
- __IO uint8_t ISPR4; /*!< Interrupt Software Priority register 4 */
- __IO uint8_t ISPR5; /*!< Interrupt Software Priority register 5 */
- __IO uint8_t ISPR6; /*!< Interrupt Software Priority register 6 */
- __IO uint8_t ISPR7; /*!< Interrupt Software Priority register 7 */
- __IO uint8_t ISPR8; /*!< Interrupt Software Priority register 8 */
-}
-ITC_TypeDef;
-
-/** @addtogroup ITC_Registers_Reset_Value
- * @{
- */
-
-#define ITC_SPRX_RESET_VALUE ((uint8_t)0xFF) /*!< Reset value of Software Priority registers */
-
-/**
- * @}
- */
-
-/** @addtogroup CPU_Registers_Bits_Definition
- * @{
- */
-
-#define CPU_CC_I1I0 ((uint8_t)0x28) /*!< Condition Code register, I1 and I0 bits mask */
-
-/**
- * @}
- */
-
-/*----------------------------------------------------------------------------*/
-/**
- * @brief External Interrupt Controller (EXTI)
- */
-
-typedef struct EXTI_struct
-{
- __IO uint8_t CR1; /*!< External Interrupt Control Register for PORTA to PORTD */
- __IO uint8_t CR2; /*!< External Interrupt Control Register for PORTE and TLI */
-}
-EXTI_TypeDef;
-
-/** @addtogroup EXTI_Registers_Reset_Value
- * @{
- */
-
-#define EXTI_CR1_RESET_VALUE ((uint8_t)0x00)
-#define EXTI_CR2_RESET_VALUE ((uint8_t)0x00)
-
-/**
- * @}
- */
-
-/** @addtogroup EXTI_Registers_Bits_Definition
- * @{
- */
-
-#define EXTI_CR1_PDIS ((uint8_t)0xC0) /*!< PORTD external interrupt sensitivity bits mask */
-#define EXTI_CR1_PCIS ((uint8_t)0x30) /*!< PORTC external interrupt sensitivity bits mask */
-#define EXTI_CR1_PBIS ((uint8_t)0x0C) /*!< PORTB external interrupt sensitivity bits mask */
-#define EXTI_CR1_PAIS ((uint8_t)0x03) /*!< PORTA external interrupt sensitivity bits mask */
-
-#define EXTI_CR2_TLIS ((uint8_t)0x04) /*!< Top level interrupt sensitivity bit mask */
-#define EXTI_CR2_PEIS ((uint8_t)0x03) /*!< PORTE external interrupt sensitivity bits mask */
-
-/**
- * @}
- */
-
-
-
-/*----------------------------------------------------------------------------*/
-/**
- * @brief FLASH program and Data memory (FLASH)
- */
-
-typedef struct FLASH_struct
-{
- __IO uint8_t CR1; /*!< Flash control register 1 */
- __IO uint8_t CR2; /*!< Flash control register 2 */
- __IO uint8_t NCR2; /*!< Flash complementary control register 2 */
- __IO uint8_t FPR; /*!< Flash protection register */
- __IO uint8_t NFPR; /*!< Flash complementary protection register */
- __IO uint8_t IAPSR; /*!< Flash in-application programming status register */
- uint8_t RESERVED1; /*!< Reserved byte */
- uint8_t RESERVED2; /*!< Reserved byte */
- __IO uint8_t PUKR; /*!< Flash program memory unprotection register */
- uint8_t RESERVED3; /*!< Reserved byte */
- __IO uint8_t DUKR; /*!< Data EEPROM unprotection register */
-}
-FLASH_TypeDef;
-
-/** @addtogroup FLASH_Registers_Reset_Value
- * @{
- */
-
-#define FLASH_CR1_RESET_VALUE ((uint8_t)0x00)
-#define FLASH_CR2_RESET_VALUE ((uint8_t)0x00)
-#define FLASH_NCR2_RESET_VALUE ((uint8_t)0xFF)
-#define FLASH_IAPSR_RESET_VALUE ((uint8_t)0x40)
-#define FLASH_PUKR_RESET_VALUE ((uint8_t)0x00)
-#define FLASH_DUKR_RESET_VALUE ((uint8_t)0x00)
-
-/**
- * @}
- */
-
-/** @addtogroup FLASH_Registers_Bits_Definition
- * @{
- */
-
-#define FLASH_CR1_HALT ((uint8_t)0x08) /*!< Standby in Halt mode mask */
-#define FLASH_CR1_AHALT ((uint8_t)0x04) /*!< Standby in Active Halt mode mask */
-#define FLASH_CR1_IE ((uint8_t)0x02) /*!< Flash Interrupt enable mask */
-#define FLASH_CR1_FIX ((uint8_t)0x01) /*!< Fix programming time mask */
-
-#define FLASH_CR2_OPT ((uint8_t)0x80) /*!< Select option byte mask */
-#define FLASH_CR2_WPRG ((uint8_t)0x40) /*!< Word Programming mask */
-#define FLASH_CR2_ERASE ((uint8_t)0x20) /*!< Erase block mask */
-#define FLASH_CR2_FPRG ((uint8_t)0x10) /*!< Fast programming mode mask */
-#define FLASH_CR2_PRG ((uint8_t)0x01) /*!< Program block mask */
-
-#define FLASH_NCR2_NOPT ((uint8_t)0x80) /*!< Select option byte mask */
-#define FLASH_NCR2_NWPRG ((uint8_t)0x40) /*!< Word Programming mask */
-#define FLASH_NCR2_NERASE ((uint8_t)0x20) /*!< Erase block mask */
-#define FLASH_NCR2_NFPRG ((uint8_t)0x10) /*!< Fast programming mode mask */
-#define FLASH_NCR2_NPRG ((uint8_t)0x01) /*!< Program block mask */
-
-#define FLASH_IAPSR_HVOFF ((uint8_t)0x40) /*!< End of high voltage flag mask */
-#define FLASH_IAPSR_DUL ((uint8_t)0x08) /*!< Data EEPROM unlocked flag mask */
-#define FLASH_IAPSR_EOP ((uint8_t)0x04) /*!< End of operation flag mask */
-#define FLASH_IAPSR_PUL ((uint8_t)0x02) /*!< Flash Program memory unlocked flag mask */
-#define FLASH_IAPSR_WR_PG_DIS ((uint8_t)0x01) /*!< Write attempted to protected page mask */
-
-#define FLASH_PUKR_PUK ((uint8_t)0xFF) /*!< Flash Program memory unprotection mask */
-
-#define FLASH_DUKR_DUK ((uint8_t)0xFF) /*!< Data EEPROM unprotection mask */
-
-/**
- * @}
- */
-
-/*----------------------------------------------------------------------------*/
-/**
- * @brief Option Bytes (OPT)
- */
-typedef struct OPT_struct
-{
- __IO uint8_t OPT0; /*!< Option byte 0: Read-out protection (not accessible in IAP mode) */
- __IO uint8_t OPT1; /*!< Option byte 1: User boot code */
- __IO uint8_t NOPT1; /*!< Complementary Option byte 1 */
- __IO uint8_t OPT2; /*!< Option byte 2: Alternate function remapping */
- __IO uint8_t NOPT2; /*!< Complementary Option byte 2 */
- __IO uint8_t OPT3; /*!< Option byte 3: Watchdog option */
- __IO uint8_t NOPT3; /*!< Complementary Option byte 3 */
- __IO uint8_t OPT4; /*!< Option byte 4: Clock option */
- __IO uint8_t NOPT4; /*!< Complementary Option byte 4 */
- __IO uint8_t OPT5; /*!< Option byte 5: HSE clock startup */
- __IO uint8_t NOPT5; /*!< Complementary Option byte 5 */
- uint8_t RESERVED1; /*!< Reserved Option byte*/
- uint8_t RESERVED2; /*!< Reserved Option byte*/
- __IO uint8_t OPT7; /*!< Option byte 7: flash wait states */
- __IO uint8_t NOPT7; /*!< Complementary Option byte 7 */
-}
-OPT_TypeDef;
-
-/*----------------------------------------------------------------------------*/
-/**
- * @brief Independent Watchdog (IWDG)
- */
-
-typedef struct IWDG_struct
-{
- __IO uint8_t KR; /*!< Key Register */
- __IO uint8_t PR; /*!< Prescaler Register */
- __IO uint8_t RLR; /*!< Reload Register */
-}
-IWDG_TypeDef;
-
-/** @addtogroup IWDG_Registers_Reset_Value
- * @{
- */
-
-#define IWDG_PR_RESET_VALUE ((uint8_t)0x00)
-#define IWDG_RLR_RESET_VALUE ((uint8_t)0xFF)
-
-/**
- * @}
- */
-
-/*----------------------------------------------------------------------------*/
-/**
- * @brief Window Watchdog (WWDG)
- */
-
-typedef struct WWDG_struct
-{
- __IO uint8_t CR; /*!< Control Register */
- __IO uint8_t WR; /*!< Window Register */
-}
-WWDG_TypeDef;
-
-/** @addtogroup WWDG_Registers_Reset_Value
- * @{
- */
-
-#define WWDG_CR_RESET_VALUE ((uint8_t)0x7F)
-#define WWDG_WR_RESET_VALUE ((uint8_t)0x7F)
-
-/**
- * @}
- */
-
-/** @addtogroup WWDG_Registers_Bits_Definition
- * @{
- */
-
-#define WWDG_CR_WDGA ((uint8_t)0x80) /*!< WDGA bit mask */
-#define WWDG_CR_T6 ((uint8_t)0x40) /*!< T6 bit mask */
-#define WWDG_CR_T ((uint8_t)0x7F) /*!< T bits mask */
-
-#define WWDG_WR_MSB ((uint8_t)0x80) /*!< MSB bit mask */
-#define WWDG_WR_W ((uint8_t)0x7F) /*!< W bits mask */
-
-/**
- * @}
- */
-
-/*----------------------------------------------------------------------------*/
-/**
- * @brief Reset Controller (RST)
- */
-
-typedef struct RST_struct
-{
- __IO uint8_t SR; /*!< Reset status register */
-}
-RST_TypeDef;
-
-/** @addtogroup RST_Registers_Bits_Definition
- * @{
- */
-
-#define RST_SR_EMCF ((uint8_t)0x10) /*!< EMC reset flag bit mask */
-#define RST_SR_SWIMF ((uint8_t)0x08) /*!< SWIM reset flag bit mask */
-#define RST_SR_ILLOPF ((uint8_t)0x04) /*!< Illegal opcode reset flag bit mask */
-#define RST_SR_IWDGF ((uint8_t)0x02) /*!< IWDG reset flag bit mask */
-#define RST_SR_WWDGF ((uint8_t)0x01) /*!< WWDG reset flag bit mask */
-
-/**
- * @}
- */
-
-/*----------------------------------------------------------------------------*/
-/**
- * @brief Serial Peripheral Interface (SPI)
- */
-
-typedef struct SPI_struct
-{
- __IO uint8_t CR1; /*!< SPI control register 1 */
- __IO uint8_t CR2; /*!< SPI control register 2 */
- __IO uint8_t ICR; /*!< SPI interrupt control register */
- __IO uint8_t SR; /*!< SPI status register */
- __IO uint8_t DR; /*!< SPI data I/O register */
- __IO uint8_t CRCPR; /*!< SPI CRC polynomial register */
- __IO uint8_t RXCRCR; /*!< SPI Rx CRC register */
- __IO uint8_t TXCRCR; /*!< SPI Tx CRC register */
-}
-SPI_TypeDef;
-
-/** @addtogroup SPI_Registers_Reset_Value
- * @{
- */
-
-#define SPI_CR1_RESET_VALUE ((uint8_t)0x00) /*!< Control Register 1 reset value */
-#define SPI_CR2_RESET_VALUE ((uint8_t)0x00) /*!< Control Register 2 reset value */
-#define SPI_ICR_RESET_VALUE ((uint8_t)0x00) /*!< Interrupt Control Register reset value */
-#define SPI_SR_RESET_VALUE ((uint8_t)0x02) /*!< Status Register reset value */
-#define SPI_DR_RESET_VALUE ((uint8_t)0x00) /*!< Data Register reset value */
-#define SPI_CRCPR_RESET_VALUE ((uint8_t)0x07) /*!< Polynomial Register reset value */
-#define SPI_RXCRCR_RESET_VALUE ((uint8_t)0x00) /*!< RX CRC Register reset value */
-#define SPI_TXCRCR_RESET_VALUE ((uint8_t)0x00) /*!< TX CRC Register reset value */
-
-/**
- * @}
- */
-
-/** @addtogroup SPI_Registers_Bits_Definition
- * @{
- */
-
-#define SPI_CR1_LSBFIRST ((uint8_t)0x80) /*!< Frame format mask */
-#define SPI_CR1_SPE ((uint8_t)0x40) /*!< Enable bits mask */
-#define SPI_CR1_BR ((uint8_t)0x38) /*!< Baud rate control mask */
-#define SPI_CR1_MSTR ((uint8_t)0x04) /*!< Master Selection mask */
-#define SPI_CR1_CPOL ((uint8_t)0x02) /*!< Clock Polarity mask */
-#define SPI_CR1_CPHA ((uint8_t)0x01) /*!< Clock Phase mask */
-
-#define SPI_CR2_BDM ((uint8_t)0x80) /*!< Bi-directional data mode enable mask */
-#define SPI_CR2_BDOE ((uint8_t)0x40) /*!< Output enable in bi-directional mode mask */
-#define SPI_CR2_CRCEN ((uint8_t)0x20) /*!< Hardware CRC calculation enable mask */
-#define SPI_CR2_CRCNEXT ((uint8_t)0x10) /*!< Transmit CRC next mask */
-#define SPI_CR2_RXONLY ((uint8_t)0x04) /*!< Receive only mask */
-#define SPI_CR2_SSM ((uint8_t)0x02) /*!< Software slave management mask */
-#define SPI_CR2_SSI ((uint8_t)0x01) /*!< Internal slave select mask */
-
-#define SPI_ICR_TXEI ((uint8_t)0x80) /*!< Tx buffer empty interrupt enable mask */
-#define SPI_ICR_RXEI ((uint8_t)0x40) /*!< Rx buffer empty interrupt enable mask */
-#define SPI_ICR_ERRIE ((uint8_t)0x20) /*!< Error interrupt enable mask */
-#define SPI_ICR_WKIE ((uint8_t)0x10) /*!< Wake-up interrupt enable mask */
-
-#define SPI_SR_BSY ((uint8_t)0x80) /*!< Busy flag */
-#define SPI_SR_OVR ((uint8_t)0x40) /*!< Overrun flag */
-#define SPI_SR_MODF ((uint8_t)0x20) /*!< Mode fault */
-#define SPI_SR_CRCERR ((uint8_t)0x10) /*!< CRC error flag */
-#define SPI_SR_WKUP ((uint8_t)0x08) /*!< Wake-Up flag */
-#define SPI_SR_TXE ((uint8_t)0x02) /*!< Transmit buffer empty */
-#define SPI_SR_RXNE ((uint8_t)0x01) /*!< Receive buffer not empty */
-
-/**
- * @}
- */
-
-/*----------------------------------------------------------------------------*/
-/**
- * @brief Universal Synchronous Asynchronous Receiver Transmitter (UART1)
- */
-
-typedef struct UART1_struct
-{
- __IO uint8_t SR; /*!< UART1 status register */
- __IO uint8_t DR; /*!< UART1 data register */
- __IO uint8_t BRR1; /*!< UART1 baud rate register */
- __IO uint8_t BRR2; /*!< UART1 DIV mantissa[11:8] SCIDIV fraction */
- __IO uint8_t CR1; /*!< UART1 control register 1 */
- __IO uint8_t CR2; /*!< UART1 control register 2 */
- __IO uint8_t CR3; /*!< UART1 control register 3 */
- __IO uint8_t CR4; /*!< UART1 control register 4 */
- __IO uint8_t CR5; /*!< UART1 control register 5 */
- __IO uint8_t GTR; /*!< UART1 guard time register */
- __IO uint8_t PSCR; /*!< UART1 prescaler register */
-}
-UART1_TypeDef;
-
-/** @addtogroup UART1_Registers_Reset_Value
- * @{
- */
-
-#define UART1_SR_RESET_VALUE ((uint8_t)0xC0)
-#define UART1_BRR1_RESET_VALUE ((uint8_t)0x00)
-#define UART1_BRR2_RESET_VALUE ((uint8_t)0x00)
-#define UART1_CR1_RESET_VALUE ((uint8_t)0x00)
-#define UART1_CR2_RESET_VALUE ((uint8_t)0x00)
-#define UART1_CR3_RESET_VALUE ((uint8_t)0x00)
-#define UART1_CR4_RESET_VALUE ((uint8_t)0x00)
-#define UART1_CR5_RESET_VALUE ((uint8_t)0x00)
-#define UART1_GTR_RESET_VALUE ((uint8_t)0x00)
-#define UART1_PSCR_RESET_VALUE ((uint8_t)0x00)
-
-/**
- * @}
- */
-
-/** @addtogroup UART1_Registers_Bits_Definition
- * @{
- */
-
-#define UART1_SR_TXE ((uint8_t)0x80) /*!< Transmit Data Register Empty mask */
-#define UART1_SR_TC ((uint8_t)0x40) /*!< Transmission Complete mask */
-#define UART1_SR_RXNE ((uint8_t)0x20) /*!< Read Data Register Not Empty mask */
-#define UART1_SR_IDLE ((uint8_t)0x10) /*!< IDLE line detected mask */
-#define UART1_SR_OR ((uint8_t)0x08) /*!< OverRun error mask */
-#define UART1_SR_NF ((uint8_t)0x04) /*!< Noise Flag mask */
-#define UART1_SR_FE ((uint8_t)0x02) /*!< Framing Error mask */
-#define UART1_SR_PE ((uint8_t)0x01) /*!< Parity Error mask */
-
-#define UART1_BRR1_DIVM ((uint8_t)0xFF) /*!< LSB mantissa of UART1DIV [7:0] mask */
-
-#define UART1_BRR2_DIVM ((uint8_t)0xF0) /*!< MSB mantissa of UART1DIV [11:8] mask */
-#define UART1_BRR2_DIVF ((uint8_t)0x0F) /*!< Fraction bits of UART1DIV [3:0] mask */
-
-#define UART1_CR1_R8 ((uint8_t)0x80) /*!< Receive Data bit 8 */
-#define UART1_CR1_T8 ((uint8_t)0x40) /*!< Transmit data bit 8 */
-#define UART1_CR1_UARTD ((uint8_t)0x20) /*!< UART1 Disable (for low power consumption) */
-#define UART1_CR1_M ((uint8_t)0x10) /*!< Word length mask */
-#define UART1_CR1_WAKE ((uint8_t)0x08) /*!< Wake-up method mask */
-#define UART1_CR1_PCEN ((uint8_t)0x04) /*!< Parity Control Enable mask */
-#define UART1_CR1_PS ((uint8_t)0x02) /*!< UART1 Parity Selection */
-#define UART1_CR1_PIEN ((uint8_t)0x01) /*!< UART1 Parity Interrupt Enable mask */
-
-#define UART1_CR2_TIEN ((uint8_t)0x80) /*!< Transmitter Interrupt Enable mask */
-#define UART1_CR2_TCIEN ((uint8_t)0x40) /*!< Transmission Complete Interrupt Enable mask */
-#define UART1_CR2_RIEN ((uint8_t)0x20) /*!< Receiver Interrupt Enable mask */
-#define UART1_CR2_ILIEN ((uint8_t)0x10) /*!< IDLE Line Interrupt Enable mask */
-#define UART1_CR2_TEN ((uint8_t)0x08) /*!< Transmitter Enable mask */
-#define UART1_CR2_REN ((uint8_t)0x04) /*!< Receiver Enable mask */
-#define UART1_CR2_RWU ((uint8_t)0x02) /*!< Receiver Wake-Up mask */
-#define UART1_CR2_SBK ((uint8_t)0x01) /*!< Send Break mask */
-
-#define UART1_CR3_LINEN ((uint8_t)0x40) /*!< Alternate Function output mask */
-#define UART1_CR3_STOP ((uint8_t)0x30) /*!< STOP bits [1:0] mask */
-#define UART1_CR3_CKEN ((uint8_t)0x08) /*!< Clock Enable mask */
-#define UART1_CR3_CPOL ((uint8_t)0x04) /*!< Clock Polarity mask */
-#define UART1_CR3_CPHA ((uint8_t)0x02) /*!< Clock Phase mask */
-#define UART1_CR3_LBCL ((uint8_t)0x01) /*!< Last Bit Clock pulse mask */
-
-#define UART1_CR4_LBDIEN ((uint8_t)0x40) /*!< LIN Break Detection Interrupt Enable mask */
-#define UART1_CR4_LBDL ((uint8_t)0x20) /*!< LIN Break Detection Length mask */
-#define UART1_CR4_LBDF ((uint8_t)0x10) /*!< LIN Break Detection Flag mask */
-#define UART1_CR4_ADD ((uint8_t)0x0F) /*!< Address of the UART1 node mask */
-
-#define UART1_CR5_SCEN ((uint8_t)0x20) /*!< Smart Card Enable mask */
-#define UART1_CR5_NACK ((uint8_t)0x10) /*!< Smart Card Nack Enable mask */
-#define UART1_CR5_HDSEL ((uint8_t)0x08) /*!< Half-Duplex Selection mask */
-#define UART1_CR5_IRLP ((uint8_t)0x04) /*!< Irda Low Power Selection mask */
-#define UART1_CR5_IREN ((uint8_t)0x02) /*!< Irda Enable mask */
-
-/**
- * @}
- */
-
-/*----------------------------------------------------------------------------*/
-/**
- * @brief Universal Synchronous Asynchronous Receiver Transmitter (UART2)
- */
-
-typedef struct UART2_struct
-{
- __IO uint8_t SR; /*!< UART1 status register */
- __IO uint8_t DR; /*!< UART1 data register */
- __IO uint8_t BRR1; /*!< UART1 baud rate register */
- __IO uint8_t BRR2; /*!< UART1 DIV mantissa[11:8] SCIDIV fraction */
- __IO uint8_t CR1; /*!< UART1 control register 1 */
- __IO uint8_t CR2; /*!< UART1 control register 2 */
- __IO uint8_t CR3; /*!< UART1 control register 3 */
- __IO uint8_t CR4; /*!< UART1 control register 4 */
- __IO uint8_t CR5; /*!< UART1 control register 5 */
- __IO uint8_t CR6; /*!< UART1 control register 6 */
- __IO uint8_t GTR; /*!< UART1 guard time register */
- __IO uint8_t PSCR; /*!< UART1 prescaler register */
-}
-UART2_TypeDef;
-
-/** @addtogroup UART2_Registers_Reset_Value
- * @{
- */
-
-#define UART2_SR_RESET_VALUE ((uint8_t)0xC0)
-#define UART2_BRR1_RESET_VALUE ((uint8_t)0x00)
-#define UART2_BRR2_RESET_VALUE ((uint8_t)0x00)
-#define UART2_CR1_RESET_VALUE ((uint8_t)0x00)
-#define UART2_CR2_RESET_VALUE ((uint8_t)0x00)
-#define UART2_CR3_RESET_VALUE ((uint8_t)0x00)
-#define UART2_CR4_RESET_VALUE ((uint8_t)0x00)
-#define UART2_CR5_RESET_VALUE ((uint8_t)0x00)
-#define UART2_CR6_RESET_VALUE ((uint8_t)0x00)
-#define UART2_GTR_RESET_VALUE ((uint8_t)0x00)
-#define UART2_PSCR_RESET_VALUE ((uint8_t)0x00)
-
-/**
- * @}
- */
-
-/** @addtogroup UART2_Registers_Bits_Definition
- * @{
- */
-
-#define UART2_SR_TXE ((uint8_t)0x80) /*!< Transmit Data Register Empty mask */
-#define UART2_SR_TC ((uint8_t)0x40) /*!< Transmission Complete mask */
-#define UART2_SR_RXNE ((uint8_t)0x20) /*!< Read Data Register Not Empty mask */
-#define UART2_SR_IDLE ((uint8_t)0x10) /*!< IDLE line detected mask */
-#define UART2_SR_OR ((uint8_t)0x08) /*!< OverRun error mask */
-#define UART2_SR_NF ((uint8_t)0x04) /*!< Noise Flag mask */
-#define UART2_SR_FE ((uint8_t)0x02) /*!< Framing Error mask */
-#define UART2_SR_PE ((uint8_t)0x01) /*!< Parity Error mask */
-
-#define UART2_BRR1_DIVM ((uint8_t)0xFF) /*!< LSB mantissa of UART2DIV [7:0] mask */
-
-#define UART2_BRR2_DIVM ((uint8_t)0xF0) /*!< MSB mantissa of UART2DIV [11:8] mask */
-#define UART2_BRR2_DIVF ((uint8_t)0x0F) /*!< Fraction bits of UART2DIV [3:0] mask */
-
-#define UART2_CR1_R8 ((uint8_t)0x80) /*!< Receive Data bit 8 */
-#define UART2_CR1_T8 ((uint8_t)0x40) /*!< Transmit data bit 8 */
-#define UART2_CR1_UARTD ((uint8_t)0x20) /*!< UART2 Disable (for low power consumption) */
-#define UART2_CR1_M ((uint8_t)0x10) /*!< Word length mask */
-#define UART2_CR1_WAKE ((uint8_t)0x08) /*!< Wake-up method mask */
-#define UART2_CR1_PCEN ((uint8_t)0x04) /*!< Parity Control Enable mask */
-#define UART2_CR1_PS ((uint8_t)0x02) /*!< UART2 Parity Selection */
-#define UART2_CR1_PIEN ((uint8_t)0x01) /*!< UART2 Parity Interrupt Enable mask */
-
-#define UART2_CR2_TIEN ((uint8_t)0x80) /*!< Transmitter Interrupt Enable mask */
-#define UART2_CR2_TCIEN ((uint8_t)0x40) /*!< Transmission Complete Interrupt Enable mask */
-#define UART2_CR2_RIEN ((uint8_t)0x20) /*!< Receiver Interrupt Enable mask */
-#define UART2_CR2_ILIEN ((uint8_t)0x10) /*!< IDLE Line Interrupt Enable mask */
-#define UART2_CR2_TEN ((uint8_t)0x08) /*!< Transmitter Enable mask */
-#define UART2_CR2_REN ((uint8_t)0x04) /*!< Receiver Enable mask */
-#define UART2_CR2_RWU ((uint8_t)0x02) /*!< Receiver Wake-Up mask */
-#define UART2_CR2_SBK ((uint8_t)0x01) /*!< Send Break mask */
-
-#define UART2_CR3_LINEN ((uint8_t)0x40) /*!< Alternate Function output mask */
-#define UART2_CR3_STOP ((uint8_t)0x30) /*!< STOP bits [1:0] mask */
-#define UART2_CR3_CKEN ((uint8_t)0x08) /*!< Clock Enable mask */
-#define UART2_CR3_CPOL ((uint8_t)0x04) /*!< Clock Polarity mask */
-#define UART2_CR3_CPHA ((uint8_t)0x02) /*!< Clock Phase mask */
-#define UART2_CR3_LBCL ((uint8_t)0x01) /*!< Last Bit Clock pulse mask */
-
-#define UART2_CR4_LBDIEN ((uint8_t)0x40) /*!< LIN Break Detection Interrupt Enable mask */
-#define UART2_CR4_LBDL ((uint8_t)0x20) /*!< LIN Break Detection Length mask */
-#define UART2_CR4_LBDF ((uint8_t)0x10) /*!< LIN Break Detection Flag mask */
-#define UART2_CR4_ADD ((uint8_t)0x0F) /*!< Address of the UART2 node mask */
-
-#define UART2_CR5_SCEN ((uint8_t)0x20) /*!< Smart Card Enable mask */
-#define UART2_CR5_NACK ((uint8_t)0x10) /*!< Smart Card Nack Enable mask */
-#define UART2_CR5_HDSEL ((uint8_t)0x08) /*!< Half-Duplex Selection mask */
-#define UART2_CR5_IRLP ((uint8_t)0x04) /*!< Irda Low Power Selection mask */
-#define UART2_CR5_IREN ((uint8_t)0x02) /*!< Irda Enable mask */
-
-#define UART2_CR6_LDUM ((uint8_t)0x80) /*!< LIN Divider Update Method */
-#define UART2_CR6_LSLV ((uint8_t)0x20) /*!< LIN Slave Enable */
-#define UART2_CR6_LASE ((uint8_t)0x10) /*!< LIN Auto synchronization Enable */
-#define UART2_CR6_LHDIEN ((uint8_t)0x04) /*!< LIN Header Detection Interrupt Enable */
-#define UART2_CR6_LHDF ((uint8_t)0x02) /*!< LIN Header Detection Flag */
-#define UART2_CR6_LSF ((uint8_t)0x01) /*!< LIN Synch Field */
-
-/**
- * @}
- */
-
-
-/*----------------------------------------------------------------------------*/
-/**
- * @brief LIN Universal Asynchronous Receiver Transmitter (UART3)
- */
-
-typedef struct UART3_struct
-{
- __IO uint8_t SR; /*!< status register */
- __IO uint8_t DR; /*!< data register */
- __IO uint8_t BRR1; /*!< baud rate register */
- __IO uint8_t BRR2; /*!< DIV mantissa[11:8] SCIDIV fraction */
- __IO uint8_t CR1; /*!< control register 1 */
- __IO uint8_t CR2; /*!< control register 2 */
- __IO uint8_t CR3; /*!< control register 3 */
- __IO uint8_t CR4; /*!< control register 4 */
- uint8_t RESERVED; /*!< Reserved byte */
- __IO uint8_t CR6; /*!< control register 5 */
-}
-UART3_TypeDef;
-
-/** @addtogroup UART3_Registers_Reset_Value
- * @{
- */
-
-#define UART3_SR_RESET_VALUE ((uint8_t)0xC0)
-#define UART3_BRR1_RESET_VALUE ((uint8_t)0x00)
-#define UART3_BRR2_RESET_VALUE ((uint8_t)0x00)
-#define UART3_CR1_RESET_VALUE ((uint8_t)0x00)
-#define UART3_CR2_RESET_VALUE ((uint8_t)0x00)
-#define UART3_CR3_RESET_VALUE ((uint8_t)0x00)
-#define UART3_CR4_RESET_VALUE ((uint8_t)0x00)
-#define UART3_CR6_RESET_VALUE ((uint8_t)0x00)
-
-/**
- * @}
- */
-
-/** @addtogroup UART3_Registers_Bits_Definition
- * @{
- */
-
-#define UART3_SR_TXE ((uint8_t)0x80) /*!< Transmit Data Register Empty mask */
-#define UART3_SR_TC ((uint8_t)0x40) /*!< Transmission Complete mask */
-#define UART3_SR_RXNE ((uint8_t)0x20) /*!< Read Data Register Not Empty mask */
-#define UART3_SR_IDLE ((uint8_t)0x10) /*!< IDLE line detected mask */
-#define UART3_SR_OR ((uint8_t)0x08) /*!< OverRun error mask */
-#define UART3_SR_NF ((uint8_t)0x04) /*!< Noise Flag mask */
-#define UART3_SR_FE ((uint8_t)0x02) /*!< Framing Error mask */
-#define UART3_SR_PE ((uint8_t)0x01) /*!< Parity Error mask */
-
-#define UART3_BRR1_DIVM ((uint8_t)0xFF) /*!< LSB mantissa of UARTDIV [7:0] mask */
-
-#define UART3_BRR2_DIVM ((uint8_t)0xF0) /*!< MSB mantissa of UARTDIV [11:8] mask */
-#define UART3_BRR2_DIVF ((uint8_t)0x0F) /*!< Fraction bits of UARTDIV [3:0] mask */
-
-#define UART3_CR1_R8 ((uint8_t)0x80) /*!< Receive Data bit 8 */
-#define UART3_CR1_T8 ((uint8_t)0x40) /*!< Transmit data bit 8 */
-#define UART3_CR1_UARTD ((uint8_t)0x20) /*!< UART Disable (for low power consumption) */
-#define UART3_CR1_M ((uint8_t)0x10) /*!< Word length mask */
-#define UART3_CR1_WAKE ((uint8_t)0x08) /*!< Wake-up method mask */
-#define UART3_CR1_PCEN ((uint8_t)0x04) /*!< Parity control enable mask */
-#define UART3_CR1_PS ((uint8_t)0x02) /*!< Parity selection bit mask */
-#define UART3_CR1_PIEN ((uint8_t)0x01) /*!< Parity interrupt enable bit mask */
-
-#define UART3_CR2_TIEN ((uint8_t)0x80) /*!< Transmitter Interrupt Enable mask */
-#define UART3_CR2_TCIEN ((uint8_t)0x40) /*!< Transmission Complete Interrupt Enable mask */
-#define UART3_CR2_RIEN ((uint8_t)0x20) /*!< Receiver Interrupt Enable mask */
-#define UART3_CR2_ILIEN ((uint8_t)0x10) /*!< IDLE Line Interrupt Enable mask */
-#define UART3_CR2_TEN ((uint8_t)0x08) /*!< Transmitter Enable mask */
-#define UART3_CR2_REN ((uint8_t)0x04) /*!< Receiver Enable mask */
-#define UART3_CR2_RWU ((uint8_t)0x02) /*!< Receiver Wake-Up mask */
-#define UART3_CR2_SBK ((uint8_t)0x01) /*!< Send Break mask */
-
-#define UART3_CR3_LINEN ((uint8_t)0x40) /*!< Alternate Function output mask */
-#define UART3_CR3_STOP ((uint8_t)0x30) /*!< STOP bits [1:0] mask */
-
-#define UART3_CR4_LBDIEN ((uint8_t)0x40) /*!< LIN Break Detection Interrupt Enable mask */
-#define UART3_CR4_LBDL ((uint8_t)0x20) /*!< LIN Break Detection Length mask */
-#define UART3_CR4_LBDF ((uint8_t)0x10) /*!< LIN Break Detection Flag mask */
-#define UART3_CR4_ADD ((uint8_t)0x0F) /*!< Address of the UART3 node mask */
-
-#define UART3_CR6_LDUM ((uint8_t)0x80) /*!< LIN Divider Update Method */
-#define UART3_CR6_LSLV ((uint8_t)0x20) /*!< LIN Slave Enable */
-#define UART3_CR6_LASE ((uint8_t)0x10) /*!< LIN Auto synchronization Enable */
-#define UART3_CR6_LHDIEN ((uint8_t)0x04) /*!< LIN Header Detection Interrupt Enable */
-#define UART3_CR6_LHDF ((uint8_t)0x02) /*!< LIN Header Detection Flag */
-#define UART3_CR6_LSF ((uint8_t)0x01) /*!< LIN Synch Field */
-
-/**
- * @}
- */
-
-
-/*----------------------------------------------------------------------------*/
-/**
- * @brief Controller Area Network (CAN)
- */
-
-typedef struct
-{
- __IO uint8_t MCR; /*!< CAN master control register */
- __IO uint8_t MSR; /*!< CAN master status register */
- __IO uint8_t TSR; /*!< CAN transmit status register */
- __IO uint8_t TPR; /*!< CAN transmit priority register */
- __IO uint8_t RFR; /*!< CAN receive FIFO register */
- __IO uint8_t IER; /*!< CAN interrupt enable register */
- __IO uint8_t DGR; /*!< CAN diagnosis register */
- __IO uint8_t PSR; /*!< CAN page selection register */
-
- union
- {
- struct
- {
- __IO uint8_t MCSR;
- __IO uint8_t MDLCR;
- __IO uint8_t MIDR1;
- __IO uint8_t MIDR2;
- __IO uint8_t MIDR3;
- __IO uint8_t MIDR4;
- __IO uint8_t MDAR1;
- __IO uint8_t MDAR2;
- __IO uint8_t MDAR3;
- __IO uint8_t MDAR4;
- __IO uint8_t MDAR5;
- __IO uint8_t MDAR6;
- __IO uint8_t MDAR7;
- __IO uint8_t MDAR8;
- __IO uint8_t MTSRL;
- __IO uint8_t MTSRH;
- }
- TxMailbox;
-
- struct
- {
- __IO uint8_t FR01;
- __IO uint8_t FR02;
- __IO uint8_t FR03;
- __IO uint8_t FR04;
- __IO uint8_t FR05;
- __IO uint8_t FR06;
- __IO uint8_t FR07;
- __IO uint8_t FR08;
-
- __IO uint8_t FR09;
- __IO uint8_t FR10;
- __IO uint8_t FR11;
- __IO uint8_t FR12;
- __IO uint8_t FR13;
- __IO uint8_t FR14;
- __IO uint8_t FR15;
- __IO uint8_t FR16;
- }
- Filter;
-
-
- struct
- {
- __IO uint8_t F0R1;
- __IO uint8_t F0R2;
- __IO uint8_t F0R3;
- __IO uint8_t F0R4;
- __IO uint8_t F0R5;
- __IO uint8_t F0R6;
- __IO uint8_t F0R7;
- __IO uint8_t F0R8;
-
- __IO uint8_t F1R1;
- __IO uint8_t F1R2;
- __IO uint8_t F1R3;
- __IO uint8_t F1R4;
- __IO uint8_t F1R5;
- __IO uint8_t F1R6;
- __IO uint8_t F1R7;
- __IO uint8_t F1R8;
- }
- Filter01;
-
- struct
- {
- __IO uint8_t F2R1;
- __IO uint8_t F2R2;
- __IO uint8_t F2R3;
- __IO uint8_t F2R4;
- __IO uint8_t F2R5;
- __IO uint8_t F2R6;
- __IO uint8_t F2R7;
- __IO uint8_t F2R8;
-
- __IO uint8_t F3R1;
- __IO uint8_t F3R2;
- __IO uint8_t F3R3;
- __IO uint8_t F3R4;
- __IO uint8_t F3R5;
- __IO uint8_t F3R6;
- __IO uint8_t F3R7;
- __IO uint8_t F3R8;
- }
- Filter23;
-
- struct
- {
- __IO uint8_t F4R1;
- __IO uint8_t F4R2;
- __IO uint8_t F4R3;
- __IO uint8_t F4R4;
- __IO uint8_t F4R5;
- __IO uint8_t F4R6;
- __IO uint8_t F4R7;
- __IO uint8_t F4R8;
-
- __IO uint8_t F5R1;
- __IO uint8_t F5R2;
- __IO uint8_t F5R3;
- __IO uint8_t F5R4;
- __IO uint8_t F5R5;
- __IO uint8_t F5R6;
- __IO uint8_t F5R7;
- __IO uint8_t F5R8;
- }
- Filter45;
-
- struct
- {
- __IO uint8_t ESR;
- __IO uint8_t EIER;
- __IO uint8_t TECR;
- __IO uint8_t RECR;
- __IO uint8_t BTR1;
- __IO uint8_t BTR2;
- u8 Reserved1[2];
- __IO uint8_t FMR1;
- __IO uint8_t FMR2;
- __IO uint8_t FCR1;
- __IO uint8_t FCR2;
- __IO uint8_t FCR3;
- u8 Reserved2[3];
- }
- Config;
-
- struct
- {
- __IO uint8_t MFMI;
- __IO uint8_t MDLCR;
- __IO uint8_t MIDR1;
- __IO uint8_t MIDR2;
- __IO uint8_t MIDR3;
- __IO uint8_t MIDR4;
- __IO uint8_t MDAR1;
- __IO uint8_t MDAR2;
- __IO uint8_t MDAR3;
- __IO uint8_t MDAR4;
- __IO uint8_t MDAR5;
- __IO uint8_t MDAR6;
- __IO uint8_t MDAR7;
- __IO uint8_t MDAR8;
- __IO uint8_t MTSRL;
- __IO uint8_t MTSRH;
- }
- RxFIFO;
- }Page;
-} CAN_TypeDef;
-/** @addtogroup CAN_Registers_Bits_Definition
- * @{
- */
-/*******************************Common****************************************/
-/* CAN Master Control Register bits */
-#define CAN_MCR_INRQ ((uint8_t)0x01)
-#define CAN_MCR_SLEEP ((uint8_t)0x02)
-#define CAN_MCR_TXFP ((uint8_t)0x04)
-#define CAN_MCR_RFLM ((uint8_t)0x08)
-#define CAN_MCR_NART ((uint8_t)0x10)
-#define CAN_MCR_AWUM ((uint8_t)0x20)
-#define CAN_MCR_ABOM ((uint8_t)0x40)
-#define CAN_MCR_TTCM ((uint8_t)0x80)
-
-/* CAN Master Status Register bits */
-#define CAN_MSR_INAK ((uint8_t)0x01)
-#define CAN_MSR_SLAK ((uint8_t)0x02)
-#define CAN_MSR_ERRI ((uint8_t)0x04)
-#define CAN_MSR_WKUI ((uint8_t)0x08)
-#define CAN_MSR_TX ((uint8_t)0x10)
-#define CAN_MSR_RX ((uint8_t)0x20)
-
-/* CAN Transmit Status Register bits */
-#define CAN_TSR_RQCP0 ((uint8_t)0x01)
-#define CAN_TSR_RQCP1 ((uint8_t)0x02)
-#define CAN_TSR_RQCP2 ((uint8_t)0x04)
-#define CAN_TSR_RQCP012 ((uint8_t)0x07)
-#define CAN_TSR_TXOK0 ((uint8_t)0x10)
-#define CAN_TSR_TXOK1 ((uint8_t)0x20)
-#define CAN_TSR_TXOK2 ((uint8_t)0x40)
-
-#define CAN_TPR_CODE0 ((uint8_t)0x01)
-#define CAN_TPR_TME0 ((uint8_t)0x04)
-#define CAN_TPR_TME1 ((uint8_t)0x08)
-#define CAN_TPR_TME2 ((uint8_t)0x10)
-#define CAN_TPR_LOW0 ((uint8_t)0x20)
-#define CAN_TPR_LOW1 ((uint8_t)0x40)
-#define CAN_TPR_LOW2 ((uint8_t)0x80)
-/* CAN Receive FIFO Register bits */
-#define CAN_RFR_FMP01 ((uint8_t)0x03)
-#define CAN_RFR_FULL ((uint8_t)0x08)
-#define CAN_RFR_FOVR ((uint8_t)0x10)
-#define CAN_RFR_RFOM ((uint8_t)0x20)
-
-/* CAN Interrupt Register bits */
-#define CAN_IER_TMEIE ((uint8_t)0x01)
-#define CAN_IER_FMPIE ((uint8_t)0x02)
-#define CAN_IER_FFIE ((uint8_t)0x04)
-#define CAN_IER_FOVIE ((uint8_t)0x08)
-#define CAN_IER_WKUIE ((uint8_t)0x80)
-
-
-/* CAN diagnostic Register bits */
-#define CAN_DGR_LBKM ((uint8_t)0x01)
-#define CAN_DGR_SLIM ((uint8_t)0x02)
-#define CAN_DGR_SAMP ((uint8_t)0x04)
-#define CAN_DGR_RX ((uint8_t)0x08)
-#define CAN_DGR_TXM2E ((uint8_t)0x10)
-
-
-/* CAN page select Register bits */
-#define CAN_PSR_PS0 ((uint8_t)0x01)
-#define CAN_PSR_PS1 ((uint8_t)0x02)
-#define CAN_PSR_PS2 ((uint8_t)0x04)
-
-/*********************Tx MailBox & Fifo Page common bits***********************/
-#define CAN_MCSR_TXRQ ((uint8_t)0x01)
-#define CAN_MCSR_ABRQ ((uint8_t)0x02)
-#define CAN_MCSR_RQCP ((uint8_t)0x04)
-#define CAN_MCSR_TXOK ((uint8_t)0x08)
-#define CAN_MCSR_ALST ((uint8_t)0x10)
-#define CAN_MCSR_TERR ((uint8_t)0x20)
-
-#define CAN_MDLCR_DLC ((uint8_t)0x0F)
-#define CAN_MDLCR_TGT ((uint8_t)0x80)
-
-#define CAN_MIDR1_RTR ((uint8_t)0x20)
-#define CAN_MIDR1_IDE ((uint8_t)0x40)
-
-
-/*************************Filter Page******************************************/
-
-/* CAN Error Status Register bits */
-#define CAN_ESR_EWGF ((uint8_t)0x01)
-#define CAN_ESR_EPVF ((uint8_t)0x02)
-#define CAN_ESR_BOFF ((uint8_t)0x04)
-#define CAN_ESR_LEC0 ((uint8_t)0x10)
-#define CAN_ESR_LEC1 ((uint8_t)0x20)
-#define CAN_ESR_LEC2 ((uint8_t)0x40)
-#define CAN_ESR_LEC ((uint8_t)0x70)
-
-/* CAN Error Status Register bits */
-#define CAN_EIER_EWGIE ((uint8_t)0x01)
-#define CAN_EIER_EPVIE ((uint8_t)0x02)
-#define CAN_EIER_BOFIE ((uint8_t)0x04)
-#define CAN_EIER_LECIE ((uint8_t)0x10)
-#define CAN_EIER_ERRIE ((uint8_t)0x80)
-
-/* CAN transmit error counter Register bits(CAN_TECR) */
-#define CAN_TECR_TEC0 ((uint8_t)0x01)
-#define CAN_TECR_TEC1 ((uint8_t)0x02)
-#define CAN_TECR_TEC2 ((uint8_t)0x04)
-#define CAN_TECR_TEC3 ((uint8_t)0x08)
-#define CAN_TECR_TEC4 ((uint8_t)0x10)
-#define CAN_TECR_TEC5 ((uint8_t)0x20)
-#define CAN_TECR_TEC6 ((uint8_t)0x40)
-#define CAN_TECR_TEC7 ((uint8_t)0x80)
-
-/* CAN RECEIVE error counter Register bits(CAN_TECR) */
-#define CAN_RECR_REC0 ((uint8_t)0x01)
-#define CAN_RECR_REC1 ((uint8_t)0x02)
-#define CAN_RECR_REC2 ((uint8_t)0x04)
-#define CAN_RECR_REC3 ((uint8_t)0x08)
-#define CAN_RECR_REC4 ((uint8_t)0x10)
-#define CAN_RECR_REC5 ((uint8_t)0x20)
-#define CAN_RECR_REC6 ((uint8_t)0x40)
-#define CAN_RECR_REC7 ((uint8_t)0x80)
-
-/* CAN filter mode register bits (CAN_FMR) */
-#define CAN_FMR1_FML0 ((uint8_t)0x01)
-#define CAN_FMR1_FMH0 ((uint8_t)0x02)
-#define CAN_FMR1_FML1 ((uint8_t)0x04)
-#define CAN_FMR1_FMH1 ((uint8_t)0x08)
-#define CAN_FMR1_FML2 ((uint8_t)0x10)
-#define CAN_FMR1_FMH2 ((uint8_t)0x20)
-#define CAN_FMR1_FML3 ((uint8_t)0x40)
-#define CAN_FMR1_FMH3 ((uint8_t)0x80)
-
-#define CAN_FMR2_FML4 ((uint8_t)0x01)
-#define CAN_FMR2_FMH4 ((uint8_t)0x02)
-#define CAN_FMR2_FML5 ((uint8_t)0x04)
-#define CAN_FMR2_FMH5 ((uint8_t)0x08)
-
-/* CAN filter Config register bits (CAN_FCR) */
-#define CAN_FCR1_FACT0 ((uint8_t)0x01)
-#define CAN_FCR1_FACT1 ((uint8_t)0x10)
-#define CAN_FCR2_FACT2 ((uint8_t)0x01)
-#define CAN_FCR2_FACT3 ((uint8_t)0x10)
-#define CAN_FCR3_FACT4 ((uint8_t)0x01)
-#define CAN_FCR3_FACT5 ((uint8_t)0x10)
-
-#define CAN_FCR1_FSC00 ((uint8_t)0x02)
-#define CAN_FCR1_FSC01 ((uint8_t)0x04)
-#define CAN_FCR1_FSC10 ((uint8_t)0x20)
-#define CAN_FCR1_FSC11 ((uint8_t)0x40)
-#define CAN_FCR2_FSC20 ((uint8_t)0x02)
-#define CAN_FCR2_FSC21 ((uint8_t)0x04)
-#define CAN_FCR2_FSC30 ((uint8_t)0x20)
-#define CAN_FCR2_FSC31 ((uint8_t)0x40)
-#define CAN_FCR3_FSC40 ((uint8_t)0x02)
-#define CAN_FCR3_FSC41 ((uint8_t)0x04)
-#define CAN_FCR3_FSC50 ((uint8_t)0x20)
-#define CAN_FCR3_FSC51 ((uint8_t)0x40)
-
-
-
-/**
- * @}
- */
-
-/** @addtogroup CAN_Registers_Reset_Value
- * @{
- */
-
-#define CAN_MCR_RESET_VALUE ((uint8_t)0x02)
-#define CAN_MSR_RESET_VALUE ((uint8_t)0x02)
-#define CAN_TSR_RESET_VALUE ((uint8_t)0x00)
-#define CAN_TPR_RESET_VALUE ((uint8_t)0x0C)
-#define CAN_RFR_RESET_VALUE ((uint8_t)0x00)
-#define CAN_IER_RESET_VALUE ((uint8_t)0x00)
-#define CAN_DGR_RESET_VALUE ((uint8_t)0x0C)
-#define CAN_PSR_RESET_VALUE ((uint8_t)0x00)
-
-#define CAN_ESR_RESET_VALUE ((uint8_t)0x00)
-#define CAN_EIER_RESET_VALUE ((uint8_t)0x00)
-#define CAN_TECR_RESET_VALUE ((uint8_t)0x00)
-#define CAN_RECR_RESET_VALUE ((uint8_t)0x00)
-#define CAN_BTR1_RESET_VALUE ((uint8_t)0x40)
-#define CAN_BTR2_RESET_VALUE ((uint8_t)0x23)
-#define CAN_FMR1_RESET_VALUE ((uint8_t)0x00)
-#define CAN_FMR2_RESET_VALUE ((uint8_t)0x00)
-#define CAN_FCR_RESET_VALUE ((uint8_t)0x00)
-
-#define CAN_MFMI_RESET_VALUE ((uint8_t)0x00)
-#define CAN_MDLC_RESET_VALUE ((uint8_t)0x00)
-#define CAN_MCSR_RESET_VALUE ((uint8_t)0x00)
-
-/**
- * @}
- */
-
-/**
- * @brief Configuration Registers (CFG)
- */
-
-typedef struct CFG_struct
-{
- __IO uint8_t GCR; /*!< Global Configuration register */
-}
-CFG_TypeDef;
-
-/** @addtogroup CFG_Registers_Reset_Value
- * @{
- */
-
-#define CFG_GCR_RESET_VALUE ((uint8_t)0x00)
-
-/**
- * @}
- */
-
-/** @addtogroup CFG_Registers_Bits_Definition
- * @{
- */
-
-#define CFG_GCR_SWD ((uint8_t)0x01) /*!< Swim disable bit mask */
-#define CFG_GCR_AL ((uint8_t)0x02) /*!< Activation Level bit mask */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/******************************************************************************/
-/* Peripherals Base Address */
-/******************************************************************************/
-
-/** @addtogroup MAP_FILE_Base_Addresses
- * @{
- */
-#define OPT_BaseAddress 0x4800
-#define GPIOA_BaseAddress 0x5000
-#define GPIOB_BaseAddress 0x5005
-#define GPIOC_BaseAddress 0x500A
-#define GPIOD_BaseAddress 0x500F
-#define GPIOE_BaseAddress 0x5014
-#define GPIOF_BaseAddress 0x5019
-#define GPIOG_BaseAddress 0x501E
-#define GPIOH_BaseAddress 0x5023
-#define GPIOI_BaseAddress 0x5028
-#define FLASH_BaseAddress 0x505A
-#define EXTI_BaseAddress 0x50A0
-#define RST_BaseAddress 0x50B3
-#define CLK_BaseAddress 0x50C0
-#define WWDG_BaseAddress 0x50D1
-#define IWDG_BaseAddress 0x50E0
-#define AWU_BaseAddress 0x50F0
-#define BEEP_BaseAddress 0x50F3
-#define SPI_BaseAddress 0x5200
-#define I2C_BaseAddress 0x5210
-#define UART1_BaseAddress 0x5230
-#define UART2_BaseAddress 0x5240
-#define UART3_BaseAddress 0x5240
-#define TIM1_BaseAddress 0x5250
-#define TIM2_BaseAddress 0x5300
-#define TIM3_BaseAddress 0x5320
-#define TIM4_BaseAddress 0x5340
-#define TIM5_BaseAddress 0x5300
-#define TIM6_BaseAddress 0x5340
-#define ADC1_BaseAddress 0x53E0
-#define ADC2_BaseAddress 0x5400
-#define CAN_BaseAddress 0x5420
-#define CFG_BaseAddress 0x7F60
-#define ITC_BaseAddress 0x7F70
-#define DM_BaseAddress 0x7F90
-
-/**
- * @}
- */
-
-/******************************************************************************/
-/* Peripherals declarations */
-/******************************************************************************/
-
-#if defined(STM8S105) || defined(STM8S005) || defined(STM8S103) || defined(STM8S003) || \
- defined(STM8S903) || defined(STM8AF626x)
- #define ADC1 ((ADC1_TypeDef *) ADC1_BaseAddress)
-#endif /* (STM8S105) ||(STM8S103) || (STM8S005) ||(STM8S003) || (STM8S903) || (STM8AF626x) */
-
-#if defined(STM8S208) || defined(STM8S207) || defined (STM8S007) || defined (STM8AF52Ax) || \
- defined (STM8AF62Ax)
-#define ADC2 ((ADC2_TypeDef *) ADC2_BaseAddress)
-#endif /* (STM8S208) ||(STM8S207) || (STM8S007) || (STM8AF52Ax) || (STM8AF62Ax) */
-
-#define AWU ((AWU_TypeDef *) AWU_BaseAddress)
-
-#define BEEP ((BEEP_TypeDef *) BEEP_BaseAddress)
-
-#if defined (STM8S208) || defined (STM8AF52Ax)
- #define CAN ((CAN_TypeDef *) CAN_BaseAddress)
-#endif /* (STM8S208) || (STM8AF52Ax) */
-
-#define CLK ((CLK_TypeDef *) CLK_BaseAddress)
-
-#define EXTI ((EXTI_TypeDef *) EXTI_BaseAddress)
-
-#define FLASH ((FLASH_TypeDef *) FLASH_BaseAddress)
-
-#define OPT ((OPT_TypeDef *) OPT_BaseAddress)
-
-#define GPIOA ((GPIO_TypeDef *) GPIOA_BaseAddress)
-
-#define GPIOB ((GPIO_TypeDef *) GPIOB_BaseAddress)
-
-#define GPIOC ((GPIO_TypeDef *) GPIOC_BaseAddress)
-
-#define GPIOD ((GPIO_TypeDef *) GPIOD_BaseAddress)
-
-#define GPIOE ((GPIO_TypeDef *) GPIOE_BaseAddress)
-
-#define GPIOF ((GPIO_TypeDef *) GPIOF_BaseAddress)
-
-#if defined(STM8S207) || defined (STM8S007) || defined(STM8S208) || defined(STM8S105) || \
- defined(STM8S005) || defined (STM8AF52Ax) || defined (STM8AF62Ax) || defined (STM8AF626x)
- #define GPIOG ((GPIO_TypeDef *) GPIOG_BaseAddress)
-#endif /* (STM8S208) ||(STM8S207) || (STM8S105) || (STM8AF52Ax) || (STM8AF62Ax) || (STM8AF626x) */
-
-#if defined(STM8S207) || defined (STM8S007) || defined(STM8S208) || defined (STM8AF52Ax) || \
- defined (STM8AF62Ax)
- #define GPIOH ((GPIO_TypeDef *) GPIOH_BaseAddress)
- #define GPIOI ((GPIO_TypeDef *) GPIOI_BaseAddress)
-#endif /* (STM8S208) ||(STM8S207) || (STM8AF62Ax) || (STM8AF52Ax) */
-
-#define RST ((RST_TypeDef *) RST_BaseAddress)
-
-#define WWDG ((WWDG_TypeDef *) WWDG_BaseAddress)
-#define IWDG ((IWDG_TypeDef *) IWDG_BaseAddress)
-
-#define SPI ((SPI_TypeDef *) SPI_BaseAddress)
-#define I2C ((I2C_TypeDef *) I2C_BaseAddress)
-
-#if defined(STM8S208) ||defined(STM8S207) || defined (STM8S007) || defined(STM8S103) || \
- defined(STM8S003) ||defined(STM8S903) || defined (STM8AF52Ax) || defined (STM8AF62Ax)
- #define UART1 ((UART1_TypeDef *) UART1_BaseAddress)
-#endif /* (STM8S208) ||(STM8S207) || (STM8S103) || (STM8S903) || (STM8AF52Ax) || (STM8AF62Ax) */
-
-#if defined (STM8S105) || defined (STM8S005) || defined (STM8AF626x)
- #define UART2 ((UART2_TypeDef *) UART2_BaseAddress)
-#endif /* STM8S105 || STM8S005 || STM8AF626x */
-
-#if defined(STM8S208) ||defined(STM8S207) || defined (STM8S007) || defined (STM8AF52Ax) || \
- defined (STM8AF62Ax)
- #define UART3 ((UART3_TypeDef *) UART3_BaseAddress)
-#endif /* (STM8S208) ||(STM8S207) || (STM8AF62Ax) || (STM8AF52Ax) */
-
-#define TIM1 ((TIM1_TypeDef *) TIM1_BaseAddress)
-
-#if defined(STM8S208) || defined(STM8S207) || defined (STM8S007) || defined(STM8S103) || \
- defined(STM8S003) || defined(STM8S105) || defined(STM8S005) || defined (STM8AF52Ax) || \
- defined (STM8AF62Ax) || defined (STM8AF626x)
- #define TIM2 ((TIM2_TypeDef *) TIM2_BaseAddress)
-#endif /* (STM8S208) ||(STM8S207) || (STM8S103) || (STM8S105) || (STM8AF52Ax) || (STM8AF62Ax) || (STM8AF626x)*/
-
-#if defined(STM8S208) || defined(STM8S207) || defined (STM8S007) || defined(STM8S105) || \
- defined(STM8S005) || defined (STM8AF52Ax) || defined (STM8AF62Ax) || defined (STM8AF626x)
- #define TIM3 ((TIM3_TypeDef *) TIM3_BaseAddress)
-#endif /* (STM8S208) ||(STM8S207) || (STM8S105) || (STM8AF62Ax) || (STM8AF52Ax) || (STM8AF626x)*/
-
-#if defined(STM8S208) ||defined(STM8S207) || defined (STM8S007) || defined(STM8S103) || \
- defined(STM8S003) || defined(STM8S105) || defined(STM8S005) || defined (STM8AF52Ax) || \
- defined (STM8AF62Ax) || defined (STM8AF626x)
- #define TIM4 ((TIM4_TypeDef *) TIM4_BaseAddress)
-#endif /* (STM8S208) ||(STM8S207) || (STM8S103) || (STM8S105) || (STM8AF52Ax) || (STM8AF62Ax) || (STM8AF626x)*/
-
-#ifdef STM8S903
- #define TIM5 ((TIM5_TypeDef *) TIM5_BaseAddress)
- #define TIM6 ((TIM6_TypeDef *) TIM6_BaseAddress)
-#endif /* STM8S903 */
-
-#define ITC ((ITC_TypeDef *) ITC_BaseAddress)
-
-#define CFG ((CFG_TypeDef *) CFG_BaseAddress)
-
-#define DM ((DM_TypeDef *) DM_BaseAddress)
-
-
-#ifdef USE_STDPERIPH_DRIVER
- #include "stm8s_conf.h"
-#endif
-
-/* Exported macro --------------------------------------------------------------*/
-
-/*============================== Interrupts ====================================*/
-#ifdef _RAISONANCE_
- #include <intrins.h>
- #define enableInterrupts() _rim_() /* enable interrupts */
- #define disableInterrupts() _sim_() /* disable interrupts */
- #define rim() _rim_() /* enable interrupts */
- #define sim() _sim_() /* disable interrupts */
- #define nop() _nop_() /* No Operation */
- #define trap() _trap_() /* Trap (soft IT) */
- #define wfi() _wfi_() /* Wait For Interrupt */
- #define halt() _halt_() /* Halt */
-#elif defined(_COSMIC_)
- #define enableInterrupts() {_asm("rim\n");} /* enable interrupts */
- #define disableInterrupts() {_asm("sim\n");} /* disable interrupts */
- #define rim() {_asm("rim\n");} /* enable interrupts */
- #define sim() {_asm("sim\n");} /* disable interrupts */
- #define nop() {_asm("nop\n");} /* No Operation */
- #define trap() {_asm("trap\n");} /* Trap (soft IT) */
- #define wfi() {_asm("wfi\n");} /* Wait For Interrupt */
- #define halt() {_asm("halt\n");} /* Halt */
-#else /*_IAR_*/
- #include <intrinsics.h>
- #define enableInterrupts() __enable_interrupt() /* enable interrupts */
- #define disableInterrupts() __disable_interrupt() /* disable interrupts */
- #define rim() __enable_interrupt() /* enable interrupts */
- #define sim() __disable_interrupt() /* disable interrupts */
- #define nop() __no_operation() /* No Operation */
- #define trap() __trap() /* Trap (soft IT) */
- #define wfi() __wait_for_interrupt() /* Wait For Interrupt */
- #define halt() __halt() /* Halt */
-#endif /*_RAISONANCE_*/
-
-/*============================== Interrupt vector Handling ========================*/
-
-#ifdef _COSMIC_
- #define INTERRUPT_HANDLER(a,b) @far @interrupt void a(void)
- #define INTERRUPT_HANDLER_TRAP(a) void @far @interrupt a(void)
-#endif /* _COSMIC_ */
-
-#ifdef _RAISONANCE_
- #define INTERRUPT_HANDLER(a,b) void a(void) interrupt b
- #define INTERRUPT_HANDLER_TRAP(a) void a(void) trap
-#endif /* _RAISONANCE_ */
-
-#ifdef _IAR_
- #define STRINGVECTOR(x) #x
- #define VECTOR_ID(x) STRINGVECTOR( vector = (x) )
- #define INTERRUPT_HANDLER( a, b ) \
- _Pragma( VECTOR_ID( (b)+2 ) ) \
- __interrupt void (a)( void )
- #define INTERRUPT_HANDLER_TRAP(a) \
- _Pragma( VECTOR_ID( 1 ) ) \
- __interrupt void (a) (void)
-#endif /* _IAR_ */
-
-/*============================== Interrupt Handler declaration ========================*/
-#ifdef _COSMIC_
- #define INTERRUPT @far @interrupt
-#elif defined(_IAR_)
- #define INTERRUPT __interrupt
-#endif /* _COSMIC_ */
-
-/*============================== Handling bits ====================================*/
-/*-----------------------------------------------------------------------------
-Method : I
-Description : Handle the bit from the character variables.
-Comments : The different parameters of commands are
- - VAR : Name of the character variable where the bit is located.
- - Place : Bit position in the variable (7 6 5 4 3 2 1 0)
- - Value : Can be 0 (reset bit) or not 0 (set bit)
- The "MskBit" command allows to select some bits in a source
- variables and copy it in a destination var (return the value).
- The "ValBit" command returns the value of a bit in a char
- variable: the bit is reset if it returns 0 else the bit is set.
- This method generates not an optimised code yet.
------------------------------------------------------------------------------*/
-#define SetBit(VAR,Place) ( (VAR) |= (uint8_t)((uint8_t)1<<(uint8_t)(Place)) )
-#define ClrBit(VAR,Place) ( (VAR) &= (uint8_t)((uint8_t)((uint8_t)1<<(uint8_t)(Place))^(uint8_t)255) )
-
-#define ChgBit(VAR,Place) ( (VAR) ^= (uint8_t)((uint8_t)1<<(uint8_t)(Place)) )
-#define AffBit(VAR,Place,Value) ((Value) ? \
- ((VAR) |= ((uint8_t)1<<(Place))) : \
- ((VAR) &= (((uint8_t)1<<(Place))^(uint8_t)255)))
-#define MskBit(Dest,Msk,Src) ( (Dest) = ((Msk) & (Src)) | ((~(Msk)) & (Dest)) )
-
-#define ValBit(VAR,Place) ((uint8_t)(VAR) & (uint8_t)((uint8_t)1<<(uint8_t)(Place)))
-
-#define BYTE_0(n) ((uint8_t)((n) & (uint8_t)0xFF)) /*!< Returns the low byte of the 32-bit value */
-#define BYTE_1(n) ((uint8_t)(BYTE_0((n) >> (uint8_t)8))) /*!< Returns the second byte of the 32-bit value */
-#define BYTE_2(n) ((uint8_t)(BYTE_0((n) >> (uint8_t)16))) /*!< Returns the third byte of the 32-bit value */
-#define BYTE_3(n) ((uint8_t)(BYTE_0((n) >> (uint8_t)24))) /*!< Returns the high byte of the 32-bit value */
-
-/*============================== Assert Macros ====================================*/
-#define IS_STATE_VALUE_OK(SensitivityValue) \
- (((SensitivityValue) == ENABLE) || \
- ((SensitivityValue) == DISABLE))
-
-/*-----------------------------------------------------------------------------
-Method : II
-Description : Handle directly the bit.
-Comments : The idea is to handle directly with the bit name. For that, it is
- necessary to have RAM area descriptions (example: HW register...)
- and the following command line for each area.
- This method generates the most optimized code.
------------------------------------------------------------------------------*/
-
-#define AREA 0x00 /* The area of bits begins at address 0x10. */
-
-#define BitClr(BIT) ( *((unsigned char *) (AREA+(BIT)/8)) &= (~(1<<(7-(BIT)%8))) )
-#define BitSet(BIT) ( *((unsigned char *) (AREA+(BIT)/8)) |= (1<<(7-(BIT)%8)) )
-#define BitVal(BIT) ( *((unsigned char *) (AREA+(BIT)/8)) & (1<<(7-(BIT)%8)) )
-
-/* Exported functions ------------------------------------------------------- */
-
-#endif /* __STM8S_H */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-30 17:24:22 +0000