1 files changed, 0 insertions, 292 deletions
diff --git a/os/hal/platforms/STM32F0xx/platform.dox b/os/hal/platforms/STM32F0xx/platform.dox
deleted file mode 100644
index c8caa2b89..000000000
--- a/os/hal/platforms/STM32F0xx/platform.dox
+++ /dev/null
@@ -1,292 +0,0 @@
-/*
-    ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/**
- * @defgroup STM32F0xx_DRIVERS STM32F0xx Drivers
- * @details This section describes all the supported drivers on the STM32F0xx
- *          platform and the implementation details of the single drivers.
- *
- * @ingroup platforms
- */
-
-/**
- * @defgroup STM32F0xx_HAL STM32F0xx Initialization Support
- * @details The STM32F0xx HAL support is responsible for system initialization.
- *
- * @section stm32f0xx_hal_1 Supported HW resources
- * - PLL1.
- * - RCC.
- * - Flash.
- * .
- * @section stm32f0xx_hal_2 STM32F0xx HAL driver implementation features
- * - PLL startup and stabilization.
- * - Clock tree initialization.
- * - Clock source selection.
- * - Flash wait states initialization based on the selected clock options.
- * - SYSTICK initialization based on current clock and kernel required rate.
- * - DMA support initialization.
- * .
- * @ingroup STM32F0xx_DRIVERS
- */
-
-/**
- * @defgroup STM32F0xx_ADC STM32F0xx ADC Support
- * @details The STM32F0xx ADC driver supports the ADC peripherals using DMA
- *          channels for maximum performance.
- *
- * @section stm32f0xx_adc_1 Supported HW resources
- * - ADC1.
- * - DMA1.
- * .
- * @section stm32f0xx_adc_2 STM32F0xx ADC driver implementation features
- * - Clock stop for reduced power usage when the driver is in stop state.
- * - Streaming conversion using DMA for maximum performance.
- * - Programmable ADC interrupt priority level.
- * - Programmable DMA bus priority for each DMA channel.
- * - Programmable DMA interrupt priority for each DMA channel.
- * - DMA errors detection.
- * .
- * @ingroup STM32F0xx_DRIVERS
- */
-
-/**
- * @defgroup STM32F0xx_EXT STM32F0xx EXT Support
- * @details The STM32F0xx EXT driver uses the EXTI peripheral.
- *
- * @section stm32f0xx_ext_1 Supported HW resources
- * - EXTI.
- * .
- * @section stm32f0xx_ext_2 STM32F0xx EXT driver implementation features
- * - Each EXTI channel can be independently enabled and programmed.
- * - Programmable EXTI interrupts priority level.
- * - Capability to work as event sources (WFE) rather than interrupt sources.
- * .
- * @ingroup STM32F0xx_DRIVERS
- */
-
-/**
- * @defgroup STM32F0xx_GPT STM32F0xx GPT Support
- * @details The STM32F0xx GPT driver uses the TIMx peripherals.
- *
- * @section stm32f0xx_gpt_1 Supported HW resources
- * - TIM1.
- * - TIM2.
- * - TIM3.
- * .
- * @section stm32f0xx_gpt_2 STM32F0xx GPT driver implementation features
- * - Each timer can be independently enabled and programmed. Unused
- *   peripherals are left in low power mode.
- * - Programmable TIMx interrupts priority level.
- * .
- * @ingroup STM32F0xx_DRIVERS
- */
-
-/**
- * @defgroup STM32F0xx_ICU STM32F0xx ICU Support
- * @details The STM32F0xx ICU driver uses the TIMx peripherals.
- *
- * @section stm32f0xx_icu_1 Supported HW resources
- * - TIM1.
- * - TIM2.
- * - TIM3.
- * .
- * @section stm32f0xx_icu_2 STM32F0xx ICU driver implementation features
- * - Each timer can be independently enabled and programmed. Unused
- *   peripherals are left in low power mode.
- * - Programmable TIMx interrupts priority level.
- * .
- * @ingroup STM32F0xx_DRIVERS
- */
-
-/**
- * @defgroup STM32F0xx_PAL STM32F0xx PAL Support
- * @details The STM32F0xx PAL driver uses the GPIO peripherals.
- *
- * @section stm32f0xx_pal_1 Supported HW resources
- * - GPIOA.
- * - GPIOB.
- * - GPIOC.
- * - GPIOD.
- * - GPIOF.
- * .
- * @section stm32f0xx_pal_2 STM32F0xx PAL driver implementation features
- * The PAL driver implementation fully supports the following hardware
- * capabilities:
- * - 16 bits wide ports.
- * - Atomic set/reset functions.
- * - Atomic set+reset function (atomic bus operations).
- * - Output latched regardless of the pad setting.
- * - Direct read of input pads regardless of the pad setting.
- * .
- * @section stm32f0xx_pal_3 Supported PAL setup modes
- * The STM32F0xx PAL driver supports the following I/O modes:
- * - @p PAL_MODE_RESET.
- * - @p PAL_MODE_UNCONNECTED.
- * - @p PAL_MODE_INPUT.
- * - @p PAL_MODE_INPUT_PULLUP.
- * - @p PAL_MODE_INPUT_PULLDOWN.
- * - @p PAL_MODE_INPUT_ANALOG.
- * - @p PAL_MODE_OUTPUT_PUSHPULL.
- * - @p PAL_MODE_OUTPUT_OPENDRAIN.
- * - @p PAL_MODE_ALTERNATE (non standard).
- * .
- * Any attempt to setup an invalid mode is ignored.
- *
- * @section stm32f0xx_pal_4 Suboptimal behavior
- * The STM32F0xx GPIO is less than optimal in several areas, the limitations
- * should be taken in account while using the PAL driver:
- * - Pad/port toggling operations are not atomic.
- * - Pad/group mode setup is not atomic.
- * .
- * @ingroup STM32F0xx_DRIVERS
- */
-
-/**
- * @defgroup STM32F0xx_PWM STM32F0xx PWM Support
- * @details The STM32F0xx PWM driver uses the TIMx peripherals.
- *
- * @section stm32f0xx_pwm_1 Supported HW resources
- * - TIM1.
- * - TIM2.
- * - TIM3.
- * .
- * @section stm32f0xx_pwm_2 STM32F0xx PWM driver implementation features
- * - Each timer can be independently enabled and programmed. Unused
- *   peripherals are left in low power mode.
- * - Four independent PWM channels per timer.
- * - Programmable TIMx interrupts priority level.
- * .
- * @ingroup STM32F0xx_DRIVERS
- */
-
-/**
- * @defgroup STM32F0xx_SERIAL STM32F0xx Serial Support
- * @details The STM32F0xx Serial driver uses the USART/UART peripherals in a
- *          buffered, interrupt driven, implementation.
- *
- * @section stm32f0xx_serial_1 Supported HW resources
- * The serial driver can support any of the following hardware resources:
- * - USART1.
- * - USART2.
- * .
- * @section stm32f0xx_serial_2 STM32F0xx Serial driver implementation features
- * - Clock stop for reduced power usage when the driver is in stop state.
- * - Each UART/USART can be independently enabled and programmed. Unused
- *   peripherals are left in low power mode.
- * - Fully interrupt driven.
- * - Programmable priority levels for each UART/USART.
- * .
- * @ingroup STM32F0xx_DRIVERS
- */
-
-/**
- * @defgroup STM32F0xx_SPI STM32F0xx SPI Support
- * @details The SPI driver supports the STM32F0xx SPI peripherals using DMA
- *          channels for maximum performance.
- *
- * @section stm32f0xx_spi_1 Supported HW resources
- * - SPI1.
- * - SPI2.
- * - DMA1.
- * .
- * @section stm32f0xx_spi_2 STM32F0xx SPI driver implementation features
- * - Clock stop for reduced power usage when the driver is in stop state.
- * - Each SPI can be independently enabled and programmed. Unused
- *   peripherals are left in low power mode.
- * - Programmable interrupt priority levels for each SPI.
- * - DMA is used for receiving and transmitting.
- * - Programmable DMA bus priority for each DMA channel.
- * - Programmable DMA interrupt priority for each DMA channel.
- * - Programmable DMA error hook.
- * .
- * @ingroup STM32F0xx_DRIVERS
- */
-
-/**
- * @defgroup STM32F0xx_UART STM32F0xx UART Support
- * @details The UART driver supports the STM32F0xx USART peripherals using DMA
- *          channels for maximum performance.
- *
- * @section stm32f0xx_uart_1 Supported HW resources
- * The UART driver can support any of the following hardware resources:
- * - USART1.
- * - USART2.
- * - DMA1.
- * .
- * @section stm32f0xx_uart_2 STM32F0xx UART driver implementation features
- * - Clock stop for reduced power usage when the driver is in stop state.
- * - Each UART/USART can be independently enabled and programmed. Unused
- *   peripherals are left in low power mode.
- * - Programmable interrupt priority levels for each UART/USART.
- * - DMA is used for receiving and transmitting.
- * - Programmable DMA bus priority for each DMA channel.
- * - Programmable DMA interrupt priority for each DMA channel.
- * - Programmable DMA error hook.
- * .
- * @ingroup STM32F0xx_DRIVERS
- */
-
-/**
- * @defgroup STM32F0xx_PLATFORM_DRIVERS STM32F0xx Platform Drivers
- * @details Platform support drivers. Platform drivers do not implement HAL
- *          standard driver templates, their role is to support platform
- *          specific functionalities.
- *
- * @ingroup STM32F0xx_DRIVERS
- */
-
-/**
- * @defgroup STM32F0xx_DMA STM32F0xx DMA Support
- * @details This DMA helper driver is used by the other drivers in order to
- *          access the shared DMA resources in a consistent way.
- *
- * @section stm32f0xx_dma_1 Supported HW resources
- * The DMA driver can support any of the following hardware resources:
- * - DMA1.
- * - DMA2 (where present).
- * .
- * @section stm32f0xx_dma_2 STM32F0xx DMA driver implementation features
- * - Exports helper functions/macros to the other drivers that share the
- *   DMA resource.
- * - Automatic DMA clock stop when not in use by any driver.
- * - DMA streams and interrupt vectors sharing among multiple drivers.
- * .
- * @ingroup STM32F0xx_PLATFORM_DRIVERS
- */
-
-/**
- * @defgroup STM32F0xx_ISR STM32F0xx ISR Support
- * @details This ISR helper driver is used by the other drivers in order to
- *          map ISR names to physical vector names.
- *
- * @ingroup STM32F0xx_PLATFORM_DRIVERS
- */
-
-/**
- * @defgroup STM32F0xx_RCC STM32F0xx RCC Support
- * @details This RCC helper driver is used by the other drivers in order to
- *          access the shared RCC resources in a consistent way.
- *
- * @section stm32f0xx_rcc_1 Supported HW resources
- * - RCC.
- * .
- * @section stm32f0xx_rcc_2 STM32F0xx RCC driver implementation features
- * - Peripherals reset.
- * - Peripherals clock enable.
- * - Peripherals clock disable.
- * .
- * @ingroup STM32F0xx_PLATFORM_DRIVERS
- */