diff options
Diffstat (limited to 'os/hal/platforms/STM32F0xx/adc_lld.c')
| -rw-r--r-- | os/hal/platforms/STM32F0xx/adc_lld.c | 292 |
1 files changed, 292 insertions, 0 deletions
diff --git a/os/hal/platforms/STM32F0xx/adc_lld.c b/os/hal/platforms/STM32F0xx/adc_lld.c new file mode 100644 index 000000000..751f15afd --- /dev/null +++ b/os/hal/platforms/STM32F0xx/adc_lld.c @@ -0,0 +1,292 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
+ 2011,2012 Giovanni Di Sirio.
+
+ This file is part of ChibiOS/RT.
+
+ ChibiOS/RT is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ ChibiOS/RT is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/**
+ * @file STM32F0xx/adc_lld.c
+ * @brief STM32F0xx ADC subsystem low level driver source.
+ *
+ * @addtogroup ADC
+ * @{
+ */
+
+#include "ch.h"
+#include "hal.h"
+
+#if HAL_USE_ADC || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/** @brief ADC1 driver identifier.*/
+#if STM32_ADC_USE_ADC1 || defined(__DOXYGEN__)
+ADCDriver ADCD1;
+#endif
+
+/*===========================================================================*/
+/* Driver local variables. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Stops an ongoing conversion, if any.
+ *
+ * @param[in] adc pointer to the ADC registers block
+ */
+static void adc_lld_stop_adc(ADC_TypeDef *adc) {
+
+ if (adc->CR & ADC_CR_ADSTART) {
+ adc->CR |= ADC_CR_ADSTP;
+ while (adc->CR & ADC_CR_ADSTP)
+ ;
+ }
+}
+
+/**
+ * @brief ADC DMA ISR service routine.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ * @param[in] flags pre-shifted content of the ISR register
+ */
+static void adc_lld_serve_rx_interrupt(ADCDriver *adcp, uint32_t flags) {
+
+ /* DMA errors handling.*/
+ if ((flags & (STM32_DMA_ISR_TEIF | STM32_DMA_ISR_DMEIF)) != 0) {
+ /* DMA, this could help only if the DMA tries to access an unmapped
+ address space or violates alignment rules.*/
+ _adc_isr_error_code(adcp, ADC_ERR_DMAFAILURE);
+ }
+ else {
+ /* It is possible that the conversion group has already be reset by the
+ ADC error handler, in this case this interrupt is spurious.*/
+ if (adcp->grpp != NULL) {
+ if ((flags & STM32_DMA_ISR_HTIF) != 0) {
+ /* Half transfer processing.*/
+ _adc_isr_half_code(adcp);
+ }
+ if ((flags & STM32_DMA_ISR_TCIF) != 0) {
+ /* Transfer complete processing.*/
+ _adc_isr_full_code(adcp);
+ }
+ }
+ }
+}
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+#if STM32_ADC_USE_ADC1 || defined(__DOXYGEN__)
+/**
+ * @brief ADC interrupt handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(ADC1_IRQHandler) {
+ uint32_t isr;
+
+ CH_IRQ_PROLOGUE();
+
+ isr = ADC1->ISR;
+ ADC1->ISR = isr;
+ /* Note, an overflow may occur after the conversion ended before the driver
+ is able to stop the ADC, this is why the DMA channel is checked too.*/
+ if ((isr & ADC_ISR_OVR) && (dmaStreamGetTransactionSize(ADCD1.dmastp) > 0)) {
+ /* ADC overflow condition, this could happen only if the DMA is unable
+ to read data fast enough.*/
+ if (ADCD1.grpp != NULL)
+ _adc_isr_error_code(&ADCD1, ADC_ERR_OVERFLOW);
+ }
+ /* TODO: Add here analog watchdog handling.*/
+
+ CH_IRQ_EPILOGUE();
+}
+#endif
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level ADC driver initialization.
+ *
+ * @notapi
+ */
+void adc_lld_init(void) {
+
+#if STM32_ADC_USE_ADC1
+ /* Driver initialization.*/
+ adcObjectInit(&ADCD1);
+ ADCD1.adc = ADC1;
+ ADCD1.dmastp = STM32_DMA1_STREAM1;
+ ADCD1.dmamode = STM32_DMA_CR_PL(STM32_ADC_ADC1_DMA_PRIORITY) |
+ STM32_DMA_CR_DIR_P2M |
+ STM32_DMA_CR_MSIZE_HWORD | STM32_DMA_CR_PSIZE_HWORD |
+ STM32_DMA_CR_MINC | STM32_DMA_CR_TCIE |
+ STM32_DMA_CR_DMEIE | STM32_DMA_CR_TEIE |
+ STM32_DMA_CR_EN;
+#endif
+
+ /* The shared vector is initialized on driver initialization and never
+ disabled.*/
+ nvicEnableVector(ADC1_COMP_IRQn,
+ CORTEX_PRIORITY_MASK(STM32_ADC_IRQ_PRIORITY));
+}
+
+/**
+ * @brief Configures and activates the ADC peripheral.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ *
+ * @notapi
+ */
+void adc_lld_start(ADCDriver *adcp) {
+
+ /* If in stopped state then enables the ADC and DMA clocks.*/
+ if (adcp->state == ADC_STOP) {
+#if STM32_ADC_USE_ADC1
+ if (&ADCD1 == adcp) {
+ bool_t b;
+ b = dmaStreamAllocate(adcp->dmastp,
+ STM32_ADC_ADC1_DMA_IRQ_PRIORITY,
+ (stm32_dmaisr_t)adc_lld_serve_rx_interrupt,
+ (void *)adcp);
+ chDbgAssert(!b, "adc_lld_start(), #1", "stream already allocated");
+ dmaStreamSetPeripheral(adcp->dmastp, &ADC1->DR);
+ rccEnableADC1(FALSE);
+ }
+#endif /* STM32_ADC_USE_ADC1 */
+
+ /* ADC initial setup, starting the analog part here in order to reduce
+ the latency when starting a conversion.*/
+ adcp->adc->CR = ADC_CR_ADEN;
+ while (!(adcp->adc->ISR & ADC_ISR_ADRDY))
+ ;
+ }
+}
+
+/**
+ * @brief Deactivates the ADC peripheral.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ *
+ * @notapi
+ */
+void adc_lld_stop(ADCDriver *adcp) {
+
+ /* If in ready state then disables the ADC clock and analog part.*/
+ if (adcp->state == ADC_READY) {
+
+ dmaStreamRelease(adcp->dmastp);
+
+ /* Disabling ADC.*/
+ if (adcp->adc->CR & ADC_CR_ADEN) {
+ adc_lld_stop_adc(adcp->adc);
+ adcp->adc->CR |= ADC_CR_ADDIS;
+ while (adcp->adc->CR & ADC_CR_ADDIS)
+ ;
+ }
+
+#if STM32_ADC_USE_ADC1
+ if (&ADCD1 == adcp)
+ rccDisableADC1(FALSE);
+#endif
+ }
+}
+
+/**
+ * @brief Starts an ADC conversion.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ *
+ * @notapi
+ */
+void adc_lld_start_conversion(ADCDriver *adcp) {
+ uint32_t mode;
+ const ADCConversionGroup *grpp = adcp->grpp;
+
+ /* DMA setup.*/
+ mode = adcp->dmamode;
+ if (grpp->circular) {
+ mode |= STM32_DMA_CR_CIRC;
+ }
+ if (adcp->depth > 1) {
+ /* If the buffer depth is greater than one then the half transfer interrupt
+ interrupt is enabled in order to allows streaming processing.*/
+ mode |= STM32_DMA_CR_HTIE;
+ }
+ dmaStreamSetMemory0(adcp->dmastp, adcp->samples);
+ dmaStreamSetTransactionSize(adcp->dmastp, (uint32_t)grpp->num_channels *
+ (uint32_t)adcp->depth);
+ dmaStreamSetMode(adcp->dmastp, mode);
+
+ /* ADC setup.*/
+ adcp->adc->ISR = adcp->adc->ISR;
+ adcp->adc->IER = ADC_IER_OVRIE;
+ adcp->adc->SMPR = grpp->smpr;
+ adcp->adc->CHSELR = grpp->chselr;
+
+ /* ADC configuration and start.*/
+ adcp->adc->CFGR1 = grpp->cfgr1 | ADC_CFGR1_CONT | ADC_CFGR1_DMACFG |
+ ADC_CFGR1_DMAEN;
+ adcp->adc->CR |= ADC_CR_ADSTART;
+}
+
+/**
+ * @brief Stops an ongoing conversion.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ *
+ * @notapi
+ */
+void adc_lld_stop_conversion(ADCDriver *adcp) {
+
+ dmaStreamDisable(adcp->dmastp);
+ adc_lld_stop_adc(adcp->adc);
+}
+
+/**
+ * @brief Enables the TSVREFE bit.
+ * @details The TSVREFE bit is required in order to sample the internal
+ * temperature sensor and internal reference voltage.
+ * @note This is an STM32-only functionality.
+ */
+void adcSTM32EnableTSVREFE(void) {
+
+ ADC->CCR |= ADC_CCR_VREFEN;
+}
+
+/**
+ * @brief Disables the TSVREFE bit.
+ * @details The TSVREFE bit is required in order to sample the internal
+ * temperature sensor and internal reference voltage.
+ * @note This is an STM32-only functionality.
+ */
+void adcSTM32DisableTSVREFE(void) {
+
+ ADC->CCR &= ~ADC_CCR_VREFEN;
+}
+
+#endif /* HAL_USE_ADC */
+
+/** @} */
|