diff options
Diffstat (limited to 'os/hal/platforms/STM32/uart_lld.h')
-rw-r--r-- | os/hal/platforms/STM32/uart_lld.h | 423 |
1 files changed, 423 insertions, 0 deletions
diff --git a/os/hal/platforms/STM32/uart_lld.h b/os/hal/platforms/STM32/uart_lld.h new file mode 100644 index 000000000..742a8a37d --- /dev/null +++ b/os/hal/platforms/STM32/uart_lld.h @@ -0,0 +1,423 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
+ 2011 Giovanni Di Sirio.
+
+ This file is part of ChibiOS/RT.
+
+ ChibiOS/RT is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ ChibiOS/RT is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/**
+ * @file STM32/uart_lld.h
+ * @brief STM32 low level UART driver header.
+ *
+ * @addtogroup UART
+ * @{
+ */
+
+#ifndef _UART_LLD_H_
+#define _UART_LLD_H_
+
+#if HAL_USE_UART || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @name Configuration options
+ * @{
+ */
+/**
+ * @brief UART driver on USART1 enable switch.
+ * @details If set to @p TRUE the support for USART1 is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(STM32_UART_USE_USART1) || defined(__DOXYGEN__)
+#define STM32_UART_USE_USART1 TRUE
+#endif
+
+/**
+ * @brief UART driver on USART2 enable switch.
+ * @details If set to @p TRUE the support for USART2 is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(STM32_UART_USE_USART2) || defined(__DOXYGEN__)
+#define STM32_UART_USE_USART2 TRUE
+#endif
+
+/**
+ * @brief UART driver on USART3 enable switch.
+ * @details If set to @p TRUE the support for USART3 is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(STM32_UART_USE_USART3) || defined(__DOXYGEN__)
+#define STM32_UART_USE_USART3 TRUE
+#endif
+
+/**
+ * @brief USART1 interrupt priority level setting.
+ */
+#if !defined(STM32_UART_USART1_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_UART_USART1_IRQ_PRIORITY 12
+#endif
+
+/**
+ * @brief USART2 interrupt priority level setting.
+ */
+#if !defined(STM32_UART_USART2_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_UART_USART2_IRQ_PRIORITY 12
+#endif
+
+/**
+ * @brief USART3 interrupt priority level setting.
+ */
+#if !defined(STM32_UART_USART3_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_UART_USART3_IRQ_PRIORITY 12
+#endif
+
+/**
+ * @brief USART1 DMA priority (0..3|lowest..highest).
+ * @note The priority level is used for both the TX and RX DMA channels but
+ * because of the channels ordering the RX channel has always priority
+ * over the TX channel.
+ */
+#if !defined(STM32_UART_USART1_DMA_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_UART_USART1_DMA_PRIORITY 0
+#endif
+
+/**
+ * @brief USART2 DMA priority (0..3|lowest..highest).
+ * @note The priority level is used for both the TX and RX DMA channels but
+ * because of the channels ordering the RX channel has always priority
+ * over the TX channel.
+ */
+#if !defined(STM32_UART_USART2_DMA_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_UART_USART2_DMA_PRIORITY 0
+#endif
+
+/**
+ * @brief USART3 DMA priority (0..3|lowest..highest).
+ * @note The priority level is used for both the TX and RX DMA channels but
+ * because of the channels ordering the RX channel has always priority
+ * over the TX channel.
+ */
+#if !defined(STM32_UART_USART3_DMA_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_UART_USART3_DMA_PRIORITY 0
+#endif
+
+/**
+ * @brief USART1 DMA error hook.
+ * @note The default action for DMA errors is a system halt because DMA
+ * error can only happen because programming errors.
+ */
+#if !defined(STM32_UART_DMA_ERROR_HOOK) || defined(__DOXYGEN__)
+#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt()
+#endif
+
+#if STM32_ADVANCED_DMA || defined(__DOXYGEN__)
+
+/**
+ * @brief DMA stream used for USART1 RX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_UART_USART1_RX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
+#endif
+
+/**
+ * @brief DMA stream used for USART1 TX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_UART_USART1_TX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
+#endif
+
+/**
+ * @brief DMA stream used for USART2 RX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_UART_USART2_RX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
+#endif
+
+/**
+ * @brief DMA stream used for USART2 TX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_UART_USART2_TX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
+#endif
+
+/**
+ * @brief DMA stream used for USART3 RX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_UART_USART3_RX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
+#endif
+
+/**
+ * @brief DMA stream used for USART3 TX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_UART_USART3_TX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#endif
+
+#else /* !STM32_ADVANCED_DMA */
+
+/* Fixed streams for platforms using the old DMA peripheral, the values are
+ valid for both STM32F1xx and STM32L1xx.*/
+#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
+#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
+#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
+#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+
+#endif /* !STM32_ADVANCED_DMA*/
+/** @} */
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+#if STM32_UART_USE_USART1 && !STM32_HAS_USART1
+#error "USART1 not present in the selected device"
+#endif
+
+#if STM32_UART_USE_USART2 && !STM32_HAS_USART2
+#error "USART2 not present in the selected device"
+#endif
+
+#if STM32_UART_USE_USART3 && !STM32_HAS_USART3
+#error "USART3 not present in the selected device"
+#endif
+
+#if !STM32_UART_USE_USART1 && !STM32_UART_USE_USART2 && \
+ !STM32_UART_USE_USART3
+#error "UART driver activated but no USART/UART peripheral assigned"
+#endif
+
+#if STM32_UART_USE_USART1 && \
+ !STM32_DMA_IS_VALID_ID(STM32_UART_USART1_RX_DMA_STREAM, \
+ STM32_USART1_RX_DMA_MSK)
+#error "invalid DMA stream associated to USART1 RX"
+#endif
+
+#if STM32_UART_USE_USART1 && \
+ !STM32_DMA_IS_VALID_ID(STM32_UART_USART1_TX_DMA_STREAM, \
+ STM32_USART1_TX_DMA_MSK)
+#error "invalid DMA stream associated to USART1 TX"
+#endif
+
+#if STM32_UART_USE_USART2 && \
+ !STM32_DMA_IS_VALID_ID(STM32_UART_USART2_RX_DMA_STREAM, \
+ STM32_USART2_RX_DMA_MSK)
+#error "invalid DMA stream associated to USART2 RX"
+#endif
+
+#if STM32_UART_USE_USART2 && \
+ !STM32_DMA_IS_VALID_ID(STM32_UART_USART2_TX_DMA_STREAM, \
+ STM32_USART2_TX_DMA_MSK)
+#error "invalid DMA stream associated to USART2 TX"
+#endif
+
+#if STM32_UART_USE_USART3 && \
+ !STM32_DMA_IS_VALID_ID(STM32_UART_USART3_RX_DMA_STREAM, \
+ STM32_USART3_RX_DMA_MSK)
+#error "invalid DMA stream associated to USART3 RX"
+#endif
+
+#if STM32_UART_USE_USART3 && \
+ !STM32_DMA_IS_VALID_ID(STM32_UART_USART3_TX_DMA_STREAM, \
+ STM32_USART3_TX_DMA_MSK)
+#error "invalid DMA stream associated to USART3 TX"
+#endif
+
+#if !defined(STM32_DMA_REQUIRED)
+#define STM32_DMA_REQUIRED
+#endif
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief UART driver condition flags type.
+ */
+typedef uint32_t uartflags_t;
+
+/**
+ * @brief Structure representing an UART driver.
+ */
+typedef struct UARTDriver UARTDriver;
+
+/**
+ * @brief Generic UART notification callback type.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ */
+typedef void (*uartcb_t)(UARTDriver *uartp);
+
+/**
+ * @brief Character received UART notification callback type.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ * @param[in] c received character
+ */
+typedef void (*uartccb_t)(UARTDriver *uartp, uint16_t c);
+
+/**
+ * @brief Receive error UART notification callback type.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ * @param[in] e receive error mask
+ */
+typedef void (*uartecb_t)(UARTDriver *uartp, uartflags_t e);
+
+/**
+ * @brief Driver configuration structure.
+ * @note It could be empty on some architectures.
+ */
+typedef struct {
+ /**
+ * @brief End of transmission buffer callback.
+ */
+ uartcb_t txend1_cb;
+ /**
+ * @brief Physical end of transmission callback.
+ */
+ uartcb_t txend2_cb;
+ /**
+ * @brief Receive buffer filled callback.
+ */
+ uartcb_t rxend_cb;
+ /**
+ * @brief Character received while out if the @p UART_RECEIVE state.
+ */
+ uartccb_t rxchar_cb;
+ /**
+ * @brief Receive error callback.
+ */
+ uartecb_t rxerr_cb;
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Bit rate.
+ */
+ uint32_t speed;
+ /**
+ * @brief Initialization value for the CR1 register.
+ */
+ uint16_t cr1;
+ /**
+ * @brief Initialization value for the CR2 register.
+ */
+ uint16_t cr2;
+ /**
+ * @brief Initialization value for the CR3 register.
+ */
+ uint16_t cr3;
+} UARTConfig;
+
+/**
+ * @brief Structure representing an UART driver.
+ */
+struct UARTDriver {
+ /**
+ * @brief Driver state.
+ */
+ uartstate_t state;
+ /**
+ * @brief Transmitter state.
+ */
+ uarttxstate_t txstate;
+ /**
+ * @brief Receiver state.
+ */
+ uartrxstate_t rxstate;
+ /**
+ * @brief Current configuration data.
+ */
+ const UARTConfig *config;
+#if defined(UART_DRIVER_EXT_FIELDS)
+ UART_DRIVER_EXT_FIELDS
+#endif
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Pointer to the USART registers block.
+ */
+ USART_TypeDef *usart;
+ /**
+ * @brief DMA mode bit mask.
+ */
+ uint32_t dmamode;
+ /**
+ * @brief Receive DMA channel.
+ */
+ const stm32_dma_stream_t *dmarx;
+ /**
+ * @brief Transmit DMA channel.
+ */
+ const stm32_dma_stream_t *dmatx;
+ /**
+ * @brief Default receive buffer while into @p UART_RX_IDLE state.
+ */
+ volatile uint16_t rxbuf;
+};
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#if STM32_UART_USE_USART1 && !defined(__DOXYGEN__)
+extern UARTDriver UARTD1;
+#endif
+
+#if STM32_UART_USE_USART2 && !defined(__DOXYGEN__)
+extern UARTDriver UARTD2;
+#endif
+
+#if STM32_UART_USE_USART3 && !defined(__DOXYGEN__)
+extern UARTDriver UARTD3;
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void uart_lld_init(void);
+ void uart_lld_start(UARTDriver *uartp);
+ void uart_lld_stop(UARTDriver *uartp);
+ void uart_lld_start_send(UARTDriver *uartp, size_t n, const void *txbuf);
+ size_t uart_lld_stop_send(UARTDriver *uartp);
+ void uart_lld_start_receive(UARTDriver *uartp, size_t n, void *rxbuf);
+ size_t uart_lld_stop_receive(UARTDriver *uartp);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_UART */
+
+#endif /* _UART_LLD_H_ */
+
+/** @} */
|