1 files changed, 0 insertions, 103 deletions
diff --git a/os/hal/platforms/STM32/platform.dox b/os/hal/platforms/STM32/platform.dox
deleted file mode 100644
index 1ffad7616..000000000
--- a/os/hal/platforms/STM32/platform.dox
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
-    ChibiOS/RT - Copyright (C) 2006-2007 Giovanni Di Sirio.
-
-    This file is part of ChibiOS/RT.
-
-    ChibiOS/RT is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 3 of the License, or
-    (at your option) any later version.
-
-    ChibiOS/RT is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/**
- * @defgroup STM32 STM32 Support
- * @brief STM32 specific support.
- * @details The STM32 support includes:
- * - I/O ports driver.
- * - Buffered, interrupt driven, serial driver.
- * - DMA capable, high performance, SPI driver.
- * - DMA capable, high performance, ADC driver.
- * - A demo supporting the kernel test suite.
- * - A demo that demonstrate the FatFs use with the MMC driver.
- * .
- * @ingroup ARMCM3
- */
-
-/**
- * @defgroup STM32_PAL STM32 I/O Ports Support
- * @brief I/O Ports peripherals support.
- * @details This module supports the STM3 GPIO controller. The controller
- * supports the following features (see @ref PAL):
- * - 16 bits wide ports.
- * - Atomic set/reset functions.
- * - Atomic set+reset function (atomic bus operations).
- * - Output latched regardless of the pad setting.
- * - Direct read of input pads regardless of the pad setting.
- * .
- * <h2>Supported Setup Modes</h2>
- * - @p PAL_MODE_RESET.
- * - @p PAL_MODE_UNCONNECTED.
- * - @p PAL_MODE_INPUT.
- * - @p PAL_MODE_INPUT_PULLUP.
- * - @p PAL_MODE_INPUT_PULLDOWN.
- * - @p PAL_MODE_INPUT_ANALOG.
- * - @p PAL_MODE_OUTPUT_PUSHPULL.
- * - @p PAL_MODE_OUTPUT_OPENDRAIN.
- * .
- * Any attempt to setup an invalid mode is ignored.
- *
- * <h2>Suboptimal Behavior</h2>
- * Some GPIO features are less than optimal:
- * - Pad/port toggling operations are not atomic.
- * - Pad/group mode setup is not atomic.
- * - Writing on pads/groups/ports programmed as input with pull-up/down
- *   resistor can change the resistor setting because the output latch is
- *   used for resistor selection.
- * .
- * @ingroup STM32
- */
-
-/**
- * @defgroup STM32_SERIAL STM32 USART Support
- * @brief USART peripherals support.
- * @details The serial driver supports the STM32 USARTs in asynchronous
- *           mode.
- *
- * @ingroup STM32
- */
-
-/**
- * @defgroup STM32_DMA STM32 DMA Support
- * @brief DMA support.
- * @details The DMA helper driver allows to stop the DMA clock when no other
- *          drivers require its services.
- *
- * @ingroup STM32
- */
-
-/**
- * @defgroup STM32_SPI STM32 SPI Support
- * @brief SPI peripherals support.
- * @details The serial driver supports the STM32 SPIs using DMA channels for
- *          improved performance.
- *
- * @ingroup STM32
- */
-
-/**
- * @defgroup STM32_ADC STM32 ADC Support
- * @brief ADC peripherals support.
- * @details The serial driver supports the STM32 ADCs using DMA channels for
- *          improved performance.
- *
- * @ingroup STM32
- */
- 
-\ No newline at end of file