diff options
Diffstat (limited to 'os/hal/platforms/STM32/TIMv1/pwm_lld.c')
| -rw-r--r-- | os/hal/platforms/STM32/TIMv1/pwm_lld.c | 705 |
1 files changed, 705 insertions, 0 deletions
diff --git a/os/hal/platforms/STM32/TIMv1/pwm_lld.c b/os/hal/platforms/STM32/TIMv1/pwm_lld.c new file mode 100644 index 000000000..97114ac79 --- /dev/null +++ b/os/hal/platforms/STM32/TIMv1/pwm_lld.c @@ -0,0 +1,705 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32/pwm_lld.c
+ * @brief STM32 PWM subsystem low level driver header.
+ *
+ * @addtogroup PWM
+ * @{
+ */
+
+#include "ch.h"
+#include "hal.h"
+
+#if HAL_USE_PWM || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/**
+ * @brief PWMD1 driver identifier.
+ * @note The driver PWMD1 allocates the complex timer TIM1 when enabled.
+ */
+#if STM32_PWM_USE_TIM1 || defined(__DOXYGEN__)
+PWMDriver PWMD1;
+#endif
+
+/**
+ * @brief PWMD2 driver identifier.
+ * @note The driver PWMD2 allocates the timer TIM2 when enabled.
+ */
+#if STM32_PWM_USE_TIM2 || defined(__DOXYGEN__)
+PWMDriver PWMD2;
+#endif
+
+/**
+ * @brief PWMD3 driver identifier.
+ * @note The driver PWMD3 allocates the timer TIM3 when enabled.
+ */
+#if STM32_PWM_USE_TIM3 || defined(__DOXYGEN__)
+PWMDriver PWMD3;
+#endif
+
+/**
+ * @brief PWMD4 driver identifier.
+ * @note The driver PWMD4 allocates the timer TIM4 when enabled.
+ */
+#if STM32_PWM_USE_TIM4 || defined(__DOXYGEN__)
+PWMDriver PWMD4;
+#endif
+
+/**
+ * @brief PWMD5 driver identifier.
+ * @note The driver PWMD5 allocates the timer TIM5 when enabled.
+ */
+#if STM32_PWM_USE_TIM5 || defined(__DOXYGEN__)
+PWMDriver PWMD5;
+#endif
+
+/**
+ * @brief PWMD8 driver identifier.
+ * @note The driver PWMD8 allocates the timer TIM8 when enabled.
+ */
+#if STM32_PWM_USE_TIM8 || defined(__DOXYGEN__)
+PWMDriver PWMD8;
+#endif
+
+/**
+ * @brief PWMD9 driver identifier.
+ * @note The driver PWMD9 allocates the timer TIM9 when enabled.
+ */
+#if STM32_PWM_USE_TIM9 || defined(__DOXYGEN__)
+PWMDriver PWMD9;
+#endif
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+#if STM32_PWM_USE_TIM2 || STM32_PWM_USE_TIM3 || STM32_PWM_USE_TIM4 || \
+ STM32_PWM_USE_TIM5 || STM32_PWM_USE_TIM9 || defined(__DOXYGEN__)
+/**
+ * @brief Common TIM2...TIM5,TIM9 IRQ handler.
+ * @note It is assumed that the various sources are only activated if the
+ * associated callback pointer is not equal to @p NULL in order to not
+ * perform an extra check in a potentially critical interrupt handler.
+ *
+ * @param[in] pwmp pointer to a @p PWMDriver object
+ */
+static void pwm_lld_serve_interrupt(PWMDriver *pwmp) {
+ uint16_t sr;
+
+ sr = pwmp->tim->SR;
+ sr &= pwmp->tim->DIER;
+ pwmp->tim->SR = ~sr;
+ if ((sr & STM32_TIM_SR_CC1IF) != 0)
+ pwmp->config->channels[0].callback(pwmp);
+ if ((sr & STM32_TIM_SR_CC2IF) != 0)
+ pwmp->config->channels[1].callback(pwmp);
+ if ((sr & STM32_TIM_SR_CC3IF) != 0)
+ pwmp->config->channels[2].callback(pwmp);
+ if ((sr & STM32_TIM_SR_CC4IF) != 0)
+ pwmp->config->channels[3].callback(pwmp);
+ if ((sr & STM32_TIM_SR_UIF) != 0)
+ pwmp->config->callback(pwmp);
+}
+#endif /* STM32_PWM_USE_TIM2 || ... || STM32_PWM_USE_TIM5 */
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+#if STM32_PWM_USE_TIM1
+#if !defined(STM32_TIM1_UP_HANDLER)
+#error "STM32_TIM1_UP_HANDLER not defined"
+#endif
+/**
+ * @brief TIM1 update interrupt handler.
+ * @note It is assumed that this interrupt is only activated if the callback
+ * pointer is not equal to @p NULL in order to not perform an extra
+ * check in a potentially critical interrupt handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_TIM1_UP_HANDLER) {
+
+ CH_IRQ_PROLOGUE();
+
+ STM32_TIM1->SR = ~STM32_TIM_SR_UIF;
+ PWMD1.config->callback(&PWMD1);
+
+ CH_IRQ_EPILOGUE();
+}
+
+#if !defined(STM32_TIM1_CC_HANDLER)
+#error "STM32_TIM1_CC_HANDLER not defined"
+#endif
+/**
+ * @brief TIM1 compare interrupt handler.
+ * @note It is assumed that the various sources are only activated if the
+ * associated callback pointer is not equal to @p NULL in order to not
+ * perform an extra check in a potentially critical interrupt handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_TIM1_CC_HANDLER) {
+ uint16_t sr;
+
+ CH_IRQ_PROLOGUE();
+
+ sr = STM32_TIM1->SR & STM32_TIM1->DIER;
+ STM32_TIM1->SR = ~(STM32_TIM_SR_CC1IF | STM32_TIM_SR_CC2IF |
+ STM32_TIM_SR_CC3IF | STM32_TIM_SR_CC4IF);
+ if ((sr & STM32_TIM_SR_CC1IF) != 0)
+ PWMD1.config->channels[0].callback(&PWMD1);
+ if ((sr & STM32_TIM_SR_CC2IF) != 0)
+ PWMD1.config->channels[1].callback(&PWMD1);
+ if ((sr & STM32_TIM_SR_CC3IF) != 0)
+ PWMD1.config->channels[2].callback(&PWMD1);
+ if ((sr & STM32_TIM_SR_CC4IF) != 0)
+ PWMD1.config->channels[3].callback(&PWMD1);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif /* STM32_PWM_USE_TIM1 */
+
+#if STM32_PWM_USE_TIM2
+#if !defined(STM32_TIM2_HANDLER)
+#error "STM32_TIM2_HANDLER not defined"
+#endif
+/**
+ * @brief TIM2 interrupt handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_TIM2_HANDLER) {
+
+ CH_IRQ_PROLOGUE();
+
+ pwm_lld_serve_interrupt(&PWMD2);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif /* STM32_PWM_USE_TIM2 */
+
+#if STM32_PWM_USE_TIM3
+#if !defined(STM32_TIM3_HANDLER)
+#error "STM32_TIM3_HANDLER not defined"
+#endif
+/**
+ * @brief TIM3 interrupt handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_TIM3_HANDLER) {
+
+ CH_IRQ_PROLOGUE();
+
+ pwm_lld_serve_interrupt(&PWMD3);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif /* STM32_PWM_USE_TIM3 */
+
+#if STM32_PWM_USE_TIM4
+#if !defined(STM32_TIM4_HANDLER)
+#error "STM32_TIM4_HANDLER not defined"
+#endif
+/**
+ * @brief TIM4 interrupt handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_TIM4_HANDLER) {
+
+ CH_IRQ_PROLOGUE();
+
+ pwm_lld_serve_interrupt(&PWMD4);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif /* STM32_PWM_USE_TIM4 */
+
+#if STM32_PWM_USE_TIM5
+#if !defined(STM32_TIM5_HANDLER)
+#error "STM32_TIM5_HANDLER not defined"
+#endif
+/**
+ * @brief TIM5 interrupt handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_TIM5_HANDLER) {
+
+ CH_IRQ_PROLOGUE();
+
+ pwm_lld_serve_interrupt(&PWMD5);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif /* STM32_PWM_USE_TIM5 */
+
+#if STM32_PWM_USE_TIM8
+#if !defined(STM32_TIM8_UP_HANDLER)
+#error "STM32_TIM8_UP_HANDLER not defined"
+#endif
+/**
+ * @brief TIM8 update interrupt handler.
+ * @note It is assumed that this interrupt is only activated if the callback
+ * pointer is not equal to @p NULL in order to not perform an extra
+ * check in a potentially critical interrupt handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_TIM8_UP_HANDLER) {
+
+ CH_IRQ_PROLOGUE();
+
+ STM32_TIM8->SR = ~TIM_SR_UIF;
+ PWMD8.config->callback(&PWMD8);
+
+ CH_IRQ_EPILOGUE();
+}
+
+#if !defined(STM32_TIM8_CC_HANDLER)
+#error "STM32_TIM8_CC_HANDLER not defined"
+#endif
+/**
+ * @brief TIM8 compare interrupt handler.
+ * @note It is assumed that the various sources are only activated if the
+ * associated callback pointer is not equal to @p NULL in order to not
+ * perform an extra check in a potentially critical interrupt handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_TIM8_CC_HANDLER) {
+ uint16_t sr;
+
+ CH_IRQ_PROLOGUE();
+
+ sr = STM32_TIM8->SR & STM32_TIM8->DIER;
+ STM32_TIM8->SR = ~(STM32_TIM_SR_CC1IF | STM32_TIM_SR_CC2IF |
+ STM32_TIM_SR_CC3IF | STM32_TIM_SR_CC4IF);
+ if ((sr & STM32_TIM_SR_CC1IF) != 0)
+ PWMD8.config->channels[0].callback(&PWMD8);
+ if ((sr & STM32_TIM_SR_CC2IF) != 0)
+ PWMD8.config->channels[1].callback(&PWMD8);
+ if ((sr & STM32_TIM_SR_CC3IF) != 0)
+ PWMD8.config->channels[2].callback(&PWMD8);
+ if ((sr & STM32_TIM_SR_CC4IF) != 0)
+ PWMD8.config->channels[3].callback(&PWMD8);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif /* STM32_PWM_USE_TIM8 */
+
+#if STM32_PWM_USE_TIM9
+#if !defined(STM32_TIM9_HANDLER)
+#error "STM32_TIM9_HANDLER not defined"
+#endif
+/**
+ * @brief TIM9 interrupt handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_TIM9_HANDLER) {
+
+ CH_IRQ_PROLOGUE();
+
+ pwm_lld_serve_interrupt(&PWMD9);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif /* STM32_PWM_USE_TIM9 */
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level PWM driver initialization.
+ *
+ * @notapi
+ */
+void pwm_lld_init(void) {
+
+#if STM32_PWM_USE_TIM1
+ /* Driver initialization.*/
+ pwmObjectInit(&PWMD1);
+ PWMD1.tim = STM32_TIM1;
+#endif
+
+#if STM32_PWM_USE_TIM2
+ /* Driver initialization.*/
+ pwmObjectInit(&PWMD2);
+ PWMD2.tim = STM32_TIM2;
+#endif
+
+#if STM32_PWM_USE_TIM3
+ /* Driver initialization.*/
+ pwmObjectInit(&PWMD3);
+ PWMD3.tim = STM32_TIM3;
+#endif
+
+#if STM32_PWM_USE_TIM4
+ /* Driver initialization.*/
+ pwmObjectInit(&PWMD4);
+ PWMD4.tim = STM32_TIM4;
+#endif
+
+#if STM32_PWM_USE_TIM5
+ /* Driver initialization.*/
+ pwmObjectInit(&PWMD5);
+ PWMD5.tim = STM32_TIM5;
+#endif
+
+#if STM32_PWM_USE_TIM8
+ /* Driver initialization.*/
+ pwmObjectInit(&PWMD8);
+ PWMD8.tim = STM32_TIM8;
+#endif
+
+#if STM32_PWM_USE_TIM9
+ /* Driver initialization.*/
+ pwmObjectInit(&PWMD9);
+ PWMD9.tim = STM32_TIM9;
+#endif
+}
+
+/**
+ * @brief Configures and activates the PWM peripheral.
+ * @note Starting a driver that is already in the @p PWM_READY state
+ * disables all the active channels.
+ *
+ * @param[in] pwmp pointer to a @p PWMDriver object
+ *
+ * @notapi
+ */
+void pwm_lld_start(PWMDriver *pwmp) {
+ uint32_t psc;
+ uint16_t ccer;
+
+ if (pwmp->state == PWM_STOP) {
+ /* Clock activation and timer reset.*/
+#if STM32_PWM_USE_TIM1
+ if (&PWMD1 == pwmp) {
+ rccEnableTIM1(FALSE);
+ rccResetTIM1();
+ nvicEnableVector(STM32_TIM1_UP_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_PWM_TIM1_IRQ_PRIORITY));
+ nvicEnableVector(STM32_TIM1_CC_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_PWM_TIM1_IRQ_PRIORITY));
+ pwmp->clock = STM32_TIMCLK2;
+ }
+#endif
+#if STM32_PWM_USE_TIM2
+ if (&PWMD2 == pwmp) {
+ rccEnableTIM2(FALSE);
+ rccResetTIM2();
+ nvicEnableVector(STM32_TIM2_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_PWM_TIM2_IRQ_PRIORITY));
+ pwmp->clock = STM32_TIMCLK1;
+ }
+#endif
+#if STM32_PWM_USE_TIM3
+ if (&PWMD3 == pwmp) {
+ rccEnableTIM3(FALSE);
+ rccResetTIM3();
+ nvicEnableVector(STM32_TIM3_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_PWM_TIM3_IRQ_PRIORITY));
+ pwmp->clock = STM32_TIMCLK1;
+ }
+#endif
+#if STM32_PWM_USE_TIM4
+ if (&PWMD4 == pwmp) {
+ rccEnableTIM4(FALSE);
+ rccResetTIM4();
+ nvicEnableVector(STM32_TIM4_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_PWM_TIM4_IRQ_PRIORITY));
+ pwmp->clock = STM32_TIMCLK1;
+ }
+#endif
+
+#if STM32_PWM_USE_TIM5
+ if (&PWMD5 == pwmp) {
+ rccEnableTIM5(FALSE);
+ rccResetTIM5();
+ nvicEnableVector(STM32_TIM5_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_PWM_TIM5_IRQ_PRIORITY));
+ pwmp->clock = STM32_TIMCLK1;
+ }
+#endif
+#if STM32_PWM_USE_TIM8
+ if (&PWMD8 == pwmp) {
+ rccEnableTIM8(FALSE);
+ rccResetTIM8();
+ nvicEnableVector(STM32_TIM8_UP_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_PWM_TIM8_IRQ_PRIORITY));
+ nvicEnableVector(STM32_TIM8_CC_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_PWM_TIM8_IRQ_PRIORITY));
+ pwmp->clock = STM32_TIMCLK2;
+ }
+#endif
+#if STM32_PWM_USE_TIM9
+ if (&PWMD9 == pwmp) {
+ rccEnableTIM9(FALSE);
+ rccResetTIM9();
+ nvicEnableVector(STM32_TIM9_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_PWM_TIM9_IRQ_PRIORITY));
+ pwmp->clock = STM32_TIMCLK1;
+ }
+#endif
+
+ /* All channels configured in PWM1 mode with preload enabled and will
+ stay that way until the driver is stopped.*/
+ pwmp->tim->CCMR1 = STM32_TIM_CCMR1_OC1M(6) | STM32_TIM_CCMR1_OC1PE |
+ STM32_TIM_CCMR1_OC2M(6) | STM32_TIM_CCMR1_OC2PE;
+ pwmp->tim->CCMR2 = STM32_TIM_CCMR2_OC3M(6) | STM32_TIM_CCMR2_OC3PE |
+ STM32_TIM_CCMR2_OC4M(6) | STM32_TIM_CCMR2_OC4PE;
+ }
+ else {
+ /* Driver re-configuration scenario, it must be stopped first.*/
+ pwmp->tim->CR1 = 0; /* Timer disabled. */
+ pwmp->tim->DIER = 0; /* All IRQs disabled. */
+ pwmp->tim->SR = 0; /* Clear eventual pending IRQs. */
+ pwmp->tim->CCR[0] = 0; /* Comparator 1 disabled. */
+ pwmp->tim->CCR[1] = 0; /* Comparator 2 disabled. */
+ pwmp->tim->CCR[2] = 0; /* Comparator 3 disabled. */
+ pwmp->tim->CCR[3] = 0; /* Comparator 4 disabled. */
+ pwmp->tim->CNT = 0; /* Counter reset to zero. */
+ }
+
+ /* Timer configuration.*/
+ psc = (pwmp->clock / pwmp->config->frequency) - 1;
+ chDbgAssert((psc <= 0xFFFF) &&
+ ((psc + 1) * pwmp->config->frequency) == pwmp->clock,
+ "pwm_lld_start(), #1", "invalid frequency");
+ pwmp->tim->PSC = (uint16_t)psc;
+ pwmp->tim->ARR = (uint16_t)(pwmp->period - 1);
+ pwmp->tim->CR2 = pwmp->config->cr2;
+
+ /* Output enables and polarities setup.*/
+ ccer = 0;
+ switch (pwmp->config->channels[0].mode & PWM_OUTPUT_MASK) {
+ case PWM_OUTPUT_ACTIVE_LOW:
+ ccer |= STM32_TIM_CCER_CC1P;
+ case PWM_OUTPUT_ACTIVE_HIGH:
+ ccer |= STM32_TIM_CCER_CC1E;
+ default:
+ ;
+ }
+ switch (pwmp->config->channels[1].mode & PWM_OUTPUT_MASK) {
+ case PWM_OUTPUT_ACTIVE_LOW:
+ ccer |= STM32_TIM_CCER_CC2P;
+ case PWM_OUTPUT_ACTIVE_HIGH:
+ ccer |= STM32_TIM_CCER_CC2E;
+ default:
+ ;
+ }
+ switch (pwmp->config->channels[2].mode & PWM_OUTPUT_MASK) {
+ case PWM_OUTPUT_ACTIVE_LOW:
+ ccer |= STM32_TIM_CCER_CC3P;
+ case PWM_OUTPUT_ACTIVE_HIGH:
+ ccer |= STM32_TIM_CCER_CC3E;
+ default:
+ ;
+ }
+ switch (pwmp->config->channels[3].mode & PWM_OUTPUT_MASK) {
+ case PWM_OUTPUT_ACTIVE_LOW:
+ ccer |= STM32_TIM_CCER_CC4P;
+ case PWM_OUTPUT_ACTIVE_HIGH:
+ ccer |= STM32_TIM_CCER_CC4E;
+ default:
+ ;
+ }
+#if STM32_PWM_USE_ADVANCED
+#if STM32_PWM_USE_TIM1 && !STM32_PWM_USE_TIM8
+ if (&PWMD1 == pwmp) {
+#endif
+#if !STM32_PWM_USE_TIM1 && STM32_PWM_USE_TIM8
+ if (&PWMD8 == pwmp) {
+#endif
+#if STM32_PWM_USE_TIM1 && STM32_PWM_USE_TIM8
+ if ((&PWMD1 == pwmp) || (&PWMD8 == pwmp)) {
+#endif
+ switch (pwmp->config->channels[0].mode & PWM_COMPLEMENTARY_OUTPUT_MASK) {
+ case PWM_COMPLEMENTARY_OUTPUT_ACTIVE_LOW:
+ ccer |= STM32_TIM_CCER_CC1NP;
+ case PWM_COMPLEMENTARY_OUTPUT_ACTIVE_HIGH:
+ ccer |= STM32_TIM_CCER_CC1NE;
+ default:
+ ;
+ }
+ switch (pwmp->config->channels[1].mode & PWM_COMPLEMENTARY_OUTPUT_MASK) {
+ case PWM_COMPLEMENTARY_OUTPUT_ACTIVE_LOW:
+ ccer |= STM32_TIM_CCER_CC2NP;
+ case PWM_COMPLEMENTARY_OUTPUT_ACTIVE_HIGH:
+ ccer |= STM32_TIM_CCER_CC2NE;
+ default:
+ ;
+ }
+ switch (pwmp->config->channels[2].mode & PWM_COMPLEMENTARY_OUTPUT_MASK) {
+ case PWM_COMPLEMENTARY_OUTPUT_ACTIVE_LOW:
+ ccer |= STM32_TIM_CCER_CC3NP;
+ case PWM_COMPLEMENTARY_OUTPUT_ACTIVE_HIGH:
+ ccer |= STM32_TIM_CCER_CC3NE;
+ default:
+ ;
+ }
+ }
+#endif /* STM32_PWM_USE_ADVANCED*/
+
+ pwmp->tim->CCER = ccer;
+ pwmp->tim->EGR = STM32_TIM_EGR_UG; /* Update event. */
+ pwmp->tim->DIER = pwmp->config->callback == NULL ? 0 : STM32_TIM_DIER_UIE;
+ pwmp->tim->SR = 0; /* Clear pending IRQs. */
+#if STM32_PWM_USE_TIM1 || STM32_PWM_USE_TIM8
+#if STM32_PWM_USE_ADVANCED
+ pwmp->tim->BDTR = pwmp->config->bdtr | STM32_TIM_BDTR_MOE;
+#else
+ pwmp->tim->BDTR = STM32_TIM_BDTR_MOE;
+#endif
+#endif
+ /* Timer configured and started.*/
+ pwmp->tim->CR1 = STM32_TIM_CR1_ARPE | STM32_TIM_CR1_URS | STM32_TIM_CR1_CEN;
+}
+
+/**
+ * @brief Deactivates the PWM peripheral.
+ *
+ * @param[in] pwmp pointer to a @p PWMDriver object
+ *
+ * @notapi
+ */
+void pwm_lld_stop(PWMDriver *pwmp) {
+
+ /* If in ready state then disables the PWM clock.*/
+ if (pwmp->state == PWM_READY) {
+ pwmp->tim->CR1 = 0; /* Timer disabled. */
+ pwmp->tim->DIER = 0; /* All IRQs disabled. */
+ pwmp->tim->SR = 0; /* Clear eventual pending IRQs. */
+#if STM32_PWM_USE_TIM1 || STM32_PWM_USE_TIM8
+ pwmp->tim->BDTR = 0;
+#endif
+
+#if STM32_PWM_USE_TIM1
+ if (&PWMD1 == pwmp) {
+ nvicDisableVector(STM32_TIM1_UP_NUMBER);
+ nvicDisableVector(STM32_TIM1_CC_NUMBER);
+ rccDisableTIM1(FALSE);
+ }
+#endif
+#if STM32_PWM_USE_TIM2
+ if (&PWMD2 == pwmp) {
+ nvicDisableVector(STM32_TIM2_NUMBER);
+ rccDisableTIM2(FALSE);
+ }
+#endif
+#if STM32_PWM_USE_TIM3
+ if (&PWMD3 == pwmp) {
+ nvicDisableVector(STM32_TIM3_NUMBER);
+ rccDisableTIM3(FALSE);
+ }
+#endif
+#if STM32_PWM_USE_TIM4
+ if (&PWMD4 == pwmp) {
+ nvicDisableVector(STM32_TIM4_NUMBER);
+ rccDisableTIM4(FALSE);
+ }
+#endif
+#if STM32_PWM_USE_TIM5
+ if (&PWMD5 == pwmp) {
+ nvicDisableVector(STM32_TIM5_NUMBER);
+ rccDisableTIM5(FALSE);
+ }
+#endif
+#if STM32_PWM_USE_TIM8
+ if (&PWMD8 == pwmp) {
+ nvicDisableVector(STM32_TIM8_UP_NUMBER);
+ nvicDisableVector(STM32_TIM8_CC_NUMBER);
+ rccDisableTIM8(FALSE);
+ }
+#endif
+#if STM32_PWM_USE_TIM9
+ if (&PWMD9 == pwmp) {
+ nvicDisableVector(STM32_TIM9_NUMBER);
+ rccDisableTIM9(FALSE);
+ }
+#endif
+ }
+}
+
+/**
+ * @brief Enables a PWM channel.
+ * @pre The PWM unit must have been activated using @p pwmStart().
+ * @post The channel is active using the specified configuration.
+ * @note The function has effect at the next cycle start.
+ *
+ * @param[in] pwmp pointer to a @p PWMDriver object
+ * @param[in] channel PWM channel identifier (0...PWM_CHANNELS-1)
+ * @param[in] width PWM pulse width as clock pulses number
+ *
+ * @notapi
+ */
+void pwm_lld_enable_channel(PWMDriver *pwmp,
+ pwmchannel_t channel,
+ pwmcnt_t width) {
+
+ pwmp->tim->CCR[channel] = width; /* New duty cycle. */
+ /* If there is a callback defined for the channel then the associated
+ interrupt must be enabled.*/
+ if (pwmp->config->channels[channel].callback != NULL) {
+ uint32_t dier = pwmp->tim->DIER;
+ /* If the IRQ is not already enabled care must be taken to clear it,
+ it is probably already pending because the timer is running.*/
+ if ((dier & (2 << channel)) == 0) {
+ pwmp->tim->DIER = dier | (2 << channel);
+ pwmp->tim->SR = ~(2 << channel);
+ }
+ }
+}
+
+/**
+ * @brief Disables a PWM channel.
+ * @pre The PWM unit must have been activated using @p pwmStart().
+ * @post The channel is disabled and its output line returned to the
+ * idle state.
+ * @note The function has effect at the next cycle start.
+ *
+ * @param[in] pwmp pointer to a @p PWMDriver object
+ * @param[in] channel PWM channel identifier (0...PWM_CHANNELS-1)
+ *
+ * @notapi
+ */
+void pwm_lld_disable_channel(PWMDriver *pwmp, pwmchannel_t channel) {
+
+ pwmp->tim->CCR[channel] = 0;
+ pwmp->tim->DIER &= ~(2 << channel);
+}
+
+#endif /* HAL_USE_PWM */
+
+/** @} */
|