diff options
Diffstat (limited to 'os/hal/platforms/STM32/SPIv1/spi_lld.h')
-rw-r--r-- | os/hal/platforms/STM32/SPIv1/spi_lld.h | 407 |
1 files changed, 0 insertions, 407 deletions
diff --git a/os/hal/platforms/STM32/SPIv1/spi_lld.h b/os/hal/platforms/STM32/SPIv1/spi_lld.h deleted file mode 100644 index b0a65d7cd..000000000 --- a/os/hal/platforms/STM32/SPIv1/spi_lld.h +++ /dev/null @@ -1,407 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file STM32/SPIv1/spi_lld.h
- * @brief STM32 SPI subsystem low level driver header.
- *
- * @addtogroup SPI
- * @{
- */
-
-#ifndef _SPI_LLD_H_
-#define _SPI_LLD_H_
-
-#if HAL_USE_SPI || defined(__DOXYGEN__)
-
-/*===========================================================================*/
-/* Driver constants. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver pre-compile time settings. */
-/*===========================================================================*/
-
-/**
- * @name Configuration options
- * @{
- */
-/**
- * @brief SPI1 driver enable switch.
- * @details If set to @p TRUE the support for SPI1 is included.
- * @note The default is @p TRUE.
- */
-#if !defined(STM32_SPI_USE_SPI1) || defined(__DOXYGEN__)
-#define STM32_SPI_USE_SPI1 FALSE
-#endif
-
-/**
- * @brief SPI2 driver enable switch.
- * @details If set to @p TRUE the support for SPI2 is included.
- * @note The default is @p TRUE.
- */
-#if !defined(STM32_SPI_USE_SPI2) || defined(__DOXYGEN__)
-#define STM32_SPI_USE_SPI2 FALSE
-#endif
-
-/**
- * @brief SPI3 driver enable switch.
- * @details If set to @p TRUE the support for SPI3 is included.
- * @note The default is @p TRUE.
- */
-#if !defined(STM32_SPI_USE_SPI3) || defined(__DOXYGEN__)
-#define STM32_SPI_USE_SPI3 FALSE
-#endif
-
-/**
- * @brief SPI1 interrupt priority level setting.
- */
-#if !defined(STM32_SPI_SPI1_IRQ_PRIORITY) || defined(__DOXYGEN__)
-#define STM32_SPI_SPI1_IRQ_PRIORITY 10
-#endif
-
-/**
- * @brief SPI2 interrupt priority level setting.
- */
-#if !defined(STM32_SPI_SPI2_IRQ_PRIORITY) || defined(__DOXYGEN__)
-#define STM32_SPI_SPI2_IRQ_PRIORITY 10
-#endif
-
-/**
- * @brief SPI3 interrupt priority level setting.
- */
-#if !defined(STM32_SPI_SPI3_IRQ_PRIORITY) || defined(__DOXYGEN__)
-#define STM32_SPI_SPI3_IRQ_PRIORITY 10
-#endif
-
-/**
- * @brief SPI1 DMA priority (0..3|lowest..highest).
- * @note The priority level is used for both the TX and RX DMA streams but
- * because of the streams ordering the RX stream has always priority
- * over the TX stream.
- */
-#if !defined(STM32_SPI_SPI1_DMA_PRIORITY) || defined(__DOXYGEN__)
-#define STM32_SPI_SPI1_DMA_PRIORITY 1
-#endif
-
-/**
- * @brief SPI2 DMA priority (0..3|lowest..highest).
- * @note The priority level is used for both the TX and RX DMA streams but
- * because of the streams ordering the RX stream has always priority
- * over the TX stream.
- */
-#if !defined(STM32_SPI_SPI2_DMA_PRIORITY) || defined(__DOXYGEN__)
-#define STM32_SPI_SPI2_DMA_PRIORITY 1
-#endif
-
-/**
- * @brief SPI3 DMA priority (0..3|lowest..highest).
- * @note The priority level is used for both the TX and RX DMA streams but
- * because of the streams ordering the RX stream has always priority
- * over the TX stream.
- */
-#if !defined(STM32_SPI_SPI3_DMA_PRIORITY) || defined(__DOXYGEN__)
-#define STM32_SPI_SPI3_DMA_PRIORITY 1
-#endif
-
-/**
- * @brief SPI DMA error hook.
- */
-#if !defined(STM32_SPI_DMA_ERROR_HOOK) || defined(__DOXYGEN__)
-#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt()
-#endif
-
-#if STM32_ADVANCED_DMA || defined(__DOXYGEN__)
-
-/**
- * @brief DMA stream used for SPI1 RX operations.
- * @note This option is only available on platforms with enhanced DMA.
- */
-#if !defined(STM32_SPI_SPI1_RX_DMA_STREAM) || defined(__DOXYGEN__)
-#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0)
-#endif
-
-/**
- * @brief DMA stream used for SPI1 TX operations.
- * @note This option is only available on platforms with enhanced DMA.
- */
-#if !defined(STM32_SPI_SPI1_TX_DMA_STREAM) || defined(__DOXYGEN__)
-#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3)
-#endif
-
-/**
- * @brief DMA stream used for SPI2 RX operations.
- * @note This option is only available on platforms with enhanced DMA.
- */
-#if !defined(STM32_SPI_SPI2_RX_DMA_STREAM) || defined(__DOXYGEN__)
-#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
-#endif
-
-/**
- * @brief DMA stream used for SPI2 TX operations.
- * @note This option is only available on platforms with enhanced DMA.
- */
-#if !defined(STM32_SPI_SPI2_TX_DMA_STREAM) || defined(__DOXYGEN__)
-#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
-#endif
-
-/**
- * @brief DMA stream used for SPI3 RX operations.
- * @note This option is only available on platforms with enhanced DMA.
- */
-#if !defined(STM32_SPI_SPI3_RX_DMA_STREAM) || defined(__DOXYGEN__)
-#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
-#endif
-
-/**
- * @brief DMA stream used for SPI3 TX operations.
- * @note This option is only available on platforms with enhanced DMA.
- */
-#if !defined(STM32_SPI_SPI3_TX_DMA_STREAM) || defined(__DOXYGEN__)
-#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
-#endif
-
-#else /* !STM32_ADVANCED_DMA */
-
-/* Fixed streams for platforms using the old DMA peripheral, the values are
- valid for both STM32F1xx and STM32L1xx.*/
-#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
-#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
-#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
-#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
-#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 1)
-#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
-
-#endif /* !STM32_ADVANCED_DMA*/
-/** @} */
-
-/*===========================================================================*/
-/* Derived constants and error checks. */
-/*===========================================================================*/
-
-#if STM32_SPI_USE_SPI1 && !STM32_HAS_SPI1
-#error "SPI1 not present in the selected device"
-#endif
-
-#if STM32_SPI_USE_SPI2 && !STM32_HAS_SPI2
-#error "SPI2 not present in the selected device"
-#endif
-
-#if STM32_SPI_USE_SPI3 && !STM32_HAS_SPI3
-#error "SPI3 not present in the selected device"
-#endif
-
-#if !STM32_SPI_USE_SPI1 && !STM32_SPI_USE_SPI2 && !STM32_SPI_USE_SPI3
-#error "SPI driver activated but no SPI peripheral assigned"
-#endif
-
-#if STM32_SPI_USE_SPI1 && \
- !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_SPI_SPI1_IRQ_PRIORITY)
-#error "Invalid IRQ priority assigned to SPI1"
-#endif
-
-#if STM32_SPI_USE_SPI2 && \
- !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_SPI_SPI2_IRQ_PRIORITY)
-#error "Invalid IRQ priority assigned to SPI2"
-#endif
-
-#if STM32_SPI_USE_SPI3 && \
- !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_SPI_SPI3_IRQ_PRIORITY)
-#error "Invalid IRQ priority assigned to SPI3"
-#endif
-
-#if STM32_SPI_USE_SPI1 && \
- !STM32_DMA_IS_VALID_PRIORITY(STM32_SPI_SPI1_DMA_PRIORITY)
-#error "Invalid DMA priority assigned to SPI1"
-#endif
-
-#if STM32_SPI_USE_SPI2 && \
- !STM32_DMA_IS_VALID_PRIORITY(STM32_SPI_SPI2_DMA_PRIORITY)
-#error "Invalid DMA priority assigned to SPI2"
-#endif
-
-#if STM32_SPI_USE_SPI3 && \
- !STM32_DMA_IS_VALID_PRIORITY(STM32_SPI_SPI3_DMA_PRIORITY)
-#error "Invalid DMA priority assigned to SPI3"
-#endif
-
-#if STM32_SPI_USE_SPI1 && \
- !STM32_DMA_IS_VALID_ID(STM32_SPI_SPI1_RX_DMA_STREAM, STM32_SPI1_RX_DMA_MSK)
-#error "invalid DMA stream associated to SPI1 RX"
-#endif
-
-#if STM32_SPI_USE_SPI1 && \
- !STM32_DMA_IS_VALID_ID(STM32_SPI_SPI1_TX_DMA_STREAM, STM32_SPI1_TX_DMA_MSK)
-#error "invalid DMA stream associated to SPI1 TX"
-#endif
-
-#if STM32_SPI_USE_SPI2 && \
- !STM32_DMA_IS_VALID_ID(STM32_SPI_SPI2_RX_DMA_STREAM, STM32_SPI2_RX_DMA_MSK)
-#error "invalid DMA stream associated to SPI2 RX"
-#endif
-
-#if STM32_SPI_USE_SPI2 && \
- !STM32_DMA_IS_VALID_ID(STM32_SPI_SPI2_TX_DMA_STREAM, STM32_SPI2_TX_DMA_MSK)
-#error "invalid DMA stream associated to SPI2 TX"
-#endif
-
-#if STM32_SPI_USE_SPI3 && \
- !STM32_DMA_IS_VALID_ID(STM32_SPI_SPI3_RX_DMA_STREAM, STM32_SPI3_RX_DMA_MSK)
-#error "invalid DMA stream associated to SPI3 RX"
-#endif
-
-#if STM32_SPI_USE_SPI3 && \
- !STM32_DMA_IS_VALID_ID(STM32_SPI_SPI3_TX_DMA_STREAM, STM32_SPI3_TX_DMA_MSK)
-#error "invalid DMA stream associated to SPI3 TX"
-#endif
-
-#if !defined(STM32_DMA_REQUIRED)
-#define STM32_DMA_REQUIRED
-#endif
-
-/*===========================================================================*/
-/* Driver data structures and types. */
-/*===========================================================================*/
-
-/**
- * @brief Type of a structure representing an SPI driver.
- */
-typedef struct SPIDriver SPIDriver;
-
-/**
- * @brief SPI notification callback type.
- *
- * @param[in] spip pointer to the @p SPIDriver object triggering the
- * callback
- */
-typedef void (*spicallback_t)(SPIDriver *spip);
-
-/**
- * @brief Driver configuration structure.
- */
-typedef struct {
- /**
- * @brief Operation complete callback or @p NULL.
- */
- spicallback_t end_cb;
- /* End of the mandatory fields.*/
- /**
- * @brief The chip select line port.
- */
- ioportid_t ssport;
- /**
- * @brief The chip select line pad number.
- */
- uint16_t sspad;
- /**
- * @brief SPI initialization data.
- */
- uint16_t cr1;
-} SPIConfig;
-
-/**
- * @brief Structure representing a SPI driver.
- */
-struct SPIDriver{
- /**
- * @brief Driver state.
- */
- spistate_t state;
- /**
- * @brief Current configuration data.
- */
- const SPIConfig *config;
-#if SPI_USE_WAIT || defined(__DOXYGEN__)
- /**
- * @brief Waiting thread.
- */
- thread_reference_t thread;
-#endif /* SPI_USE_WAIT */
-#if SPI_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__)
- /**
- * @brief Mutex protecting the bus.
- */
- mutex_t mutex;
-#endif /* SPI_USE_MUTUAL_EXCLUSION */
-#if defined(SPI_DRIVER_EXT_FIELDS)
- SPI_DRIVER_EXT_FIELDS
-#endif
- /* End of the mandatory fields.*/
- /**
- * @brief Pointer to the SPIx registers block.
- */
- SPI_TypeDef *spi;
- /**
- * @brief Receive DMA stream.
- */
- const stm32_dma_stream_t *dmarx;
- /**
- * @brief Transmit DMA stream.
- */
- const stm32_dma_stream_t *dmatx;
- /**
- * @brief RX DMA mode bit mask.
- */
- uint32_t rxdmamode;
- /**
- * @brief TX DMA mode bit mask.
- */
- uint32_t txdmamode;
-};
-
-/*===========================================================================*/
-/* Driver macros. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* External declarations. */
-/*===========================================================================*/
-
-#if STM32_SPI_USE_SPI1 && !defined(__DOXYGEN__)
-extern SPIDriver SPID1;
-#endif
-
-#if STM32_SPI_USE_SPI2 && !defined(__DOXYGEN__)
-extern SPIDriver SPID2;
-#endif
-
-#if STM32_SPI_USE_SPI3 && !defined(__DOXYGEN__)
-extern SPIDriver SPID3;
-#endif
-
-#ifdef __cplusplus
-extern "C" {
-#endif
- void spi_lld_init(void);
- void spi_lld_start(SPIDriver *spip);
- void spi_lld_stop(SPIDriver *spip);
- void spi_lld_select(SPIDriver *spip);
- void spi_lld_unselect(SPIDriver *spip);
- void spi_lld_ignore(SPIDriver *spip, size_t n);
- void spi_lld_exchange(SPIDriver *spip, size_t n,
- const void *txbuf, void *rxbuf);
- void spi_lld_send(SPIDriver *spip, size_t n, const void *txbuf);
- void spi_lld_receive(SPIDriver *spip, size_t n, void *rxbuf);
- uint16_t spi_lld_polled_exchange(SPIDriver *spip, uint16_t frame);
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* HAL_USE_SPI */
-
-#endif /* _SPI_LLD_H_ */
-
-/** @} */
|