diff options
Diffstat (limited to 'os/hal/platforms/STM32/I2Cv2')
-rw-r--r-- | os/hal/platforms/STM32/I2Cv2/i2c_lld.c | 789 | ||||
-rw-r--r-- | os/hal/platforms/STM32/I2Cv2/i2c_lld.h | 338 |
2 files changed, 1127 insertions, 0 deletions
diff --git a/os/hal/platforms/STM32/I2Cv2/i2c_lld.c b/os/hal/platforms/STM32/I2Cv2/i2c_lld.c new file mode 100644 index 000000000..1050dc08f --- /dev/null +++ b/os/hal/platforms/STM32/I2Cv2/i2c_lld.c @@ -0,0 +1,789 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+/*
+ Concepts and parts of this file have been contributed by Uladzimir Pylinsky
+ aka barthess.
+ */
+
+/**
+ * @file STM32/I2Cv2/i2c_lld.c
+ * @brief STM32 I2C subsystem low level driver source.
+ *
+ * @addtogroup I2C
+ * @{
+ */
+
+#include "ch.h"
+#include "hal.h"
+
+#if HAL_USE_I2C || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+#define DMAMODE_COMMON \
+ (STM32_DMA_CR_PSIZE_BYTE | STM32_DMA_CR_MSIZE_BYTE | \
+ STM32_DMA_CR_MINC | STM32_DMA_CR_DMEIE | \
+ STM32_DMA_CR_TEIE | STM32_DMA_CR_TCIE)
+
+#define I2C1_RX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_I2C_I2C1_RX_DMA_STREAM, \
+ STM32_I2C1_RX_DMA_CHN)
+
+#define I2C1_TX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_I2C_I2C1_TX_DMA_STREAM, \
+ STM32_I2C1_TX_DMA_CHN)
+
+#define I2C2_RX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_I2C_I2C2_RX_DMA_STREAM, \
+ STM32_I2C2_RX_DMA_CHN)
+
+#define I2C2_TX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_I2C_I2C2_TX_DMA_STREAM, \
+ STM32_I2C2_TX_DMA_CHN)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+#define I2C_MASTER_TC \
+ ((uint32_t)(I2C_ISR_BUSY | I2C_ISR_TC))
+
+#define I2C_ERROR_MASK \
+ ((uint32_t)(I2C_ISR_BERR | I2C_ISR_ARLO | I2C_ISR_OVR | I2C_ISR_PECERR | \
+ I2C_ISR_TIMEOUT | I2C_ISR_ALERT))
+
+#define I2C_INT_MASK \
+ ((uint32_t)(I2C_ISR_TCR | I2C_ISR_TC | I2C_ISR_STOPF | I2C_ISR_NACKF | \
+ I2C_ISR_ADDR | I2C_ISR_RXNE | I2C_ISR_TXIS))
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/** @brief I2C1 driver identifier.*/
+#if STM32_I2C_USE_I2C1 || defined(__DOXYGEN__)
+I2CDriver I2CD1;
+#endif
+
+/** @brief I2C2 driver identifier.*/
+#if STM32_I2C_USE_I2C2 || defined(__DOXYGEN__)
+I2CDriver I2CD2;
+#endif
+
+/*===========================================================================*/
+/* Driver local variables. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Wakes up the waiting thread.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ * @param[in] msg wakeup message
+ *
+ * @notapi
+ */
+#define wakeup_isr(i2cp, msg) { \
+ chSysLockFromIsr(); \
+ if ((i2cp)->thread != NULL) { \
+ Thread *tp = (i2cp)->thread; \
+ (i2cp)->thread = NULL; \
+ tp->p_u.rdymsg = (msg); \
+ chSchReadyI(tp); \
+ } \
+ chSysUnlockFromIsr(); \
+}
+
+/**
+ * @brief Aborts an I2C transaction.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ *
+ * @notapi
+ */
+static void i2c_lld_abort_operation(I2CDriver *i2cp) {
+ I2C_TypeDef *dp = i2cp->i2c;
+
+ if (dp->CR1 & I2C_CR1_PE) {
+ /* Stops the I2C peripheral.*/
+ dp->CR1 &= ~I2C_CR1_PE;
+ while (dp->CR1 & I2C_CR1_PE)
+ dp->CR1 &= ~I2C_CR1_PE;
+ dp->CR1 |= I2C_CR1_PE;
+ }
+
+ /* Stops the associated DMA streams.*/
+ dmaStreamDisable(i2cp->dmatx);
+ dmaStreamDisable(i2cp->dmarx);
+}
+
+/**
+ * @brief Handling of stalled I2C transactions.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ *
+ * @notapi
+ */
+static void i2c_lld_safety_timeout(void *p) {
+ I2CDriver *i2cp = (I2CDriver *)p;
+
+ chSysLockFromIsr();
+ if (i2cp->thread) {
+ Thread *tp = i2cp->thread;
+ i2c_lld_abort_operation(i2cp);
+ i2cp->thread = NULL;
+ tp->p_u.rdymsg = RDY_TIMEOUT;
+ chSchReadyI(tp);
+ }
+ chSysUnlockFromIsr();
+}
+
+/**
+ * @brief I2C shared ISR code.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ * @param[in] isr content of the ISR register to be decoded
+ *
+ * @notapi
+ */
+static void i2c_lld_serve_interrupt(I2CDriver *i2cp, uint32_t isr) {
+ I2C_TypeDef *dp = i2cp->i2c;
+
+ if ((isr & I2C_ISR_TC) && (i2cp->state == I2C_ACTIVE_TX)) {
+ size_t rxbytes;
+
+ /* Make sure no more 'Transfer complete' interrupts.*/
+ dp->CR1 &= ~I2C_CR1_TCIE;
+
+ rxbytes = dmaStreamGetTransactionSize(i2cp->dmarx);
+ if (rxbytes > 0) {
+ i2cp->state = I2C_ACTIVE_RX;
+
+ /* Enable RX DMA */
+ dmaStreamEnable(i2cp->dmarx);
+
+ dp->CR2 &= ~I2C_CR2_NBYTES;
+ dp->CR2 |= rxbytes << 16;
+
+ /* Starts the read operation.*/
+ dp->CR2 |= I2C_CR2_RD_WRN;
+ dp->CR2 |= I2C_CR2_START;
+ }
+ else {
+ /* Nothing to receive - send STOP immediately.*/
+ dp->CR2 |= I2C_CR2_STOP;
+ }
+ }
+ if (isr & I2C_ISR_NACKF) {
+ /* Starts a STOP sequence immediately on error.*/
+ dp->CR2 |= I2C_CR2_STOP;
+
+ i2cp->errors |= I2CD_ACK_FAILURE;
+ }
+ if (isr & I2C_ISR_STOPF) {
+ /* Stops the associated DMA streams.*/
+ dmaStreamDisable(i2cp->dmatx);
+ dmaStreamDisable(i2cp->dmarx);
+
+ if (i2cp->errors) {
+ wakeup_isr(i2cp, RDY_RESET);
+ }
+ else {
+ wakeup_isr(i2cp, RDY_OK);
+ }
+ }
+}
+
+/**
+ * @brief DMA RX end IRQ handler.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ * @param[in] flags pre-shifted content of the ISR register
+ *
+ * @notapi
+ */
+static void i2c_lld_serve_rx_end_irq(I2CDriver *i2cp, uint32_t flags) {
+ I2C_TypeDef *dp = i2cp->i2c;
+
+ /* DMA errors handling.*/
+#if defined(STM32_I2C_DMA_ERROR_HOOK)
+ if ((flags & (STM32_DMA_ISR_TEIF | STM32_DMA_ISR_DMEIF)) != 0) {
+ STM32_I2C_DMA_ERROR_HOOK(i2cp);
+ }
+#else
+ (void)flags;
+#endif
+
+ dmaStreamDisable(i2cp->dmarx);
+ dp->CR2 |= I2C_CR2_STOP;
+ wakeup_isr(i2cp, RDY_OK);
+}
+
+/**
+ * @brief DMA TX end IRQ handler.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ *
+ * @notapi
+ */
+static void i2c_lld_serve_tx_end_irq(I2CDriver *i2cp, uint32_t flags) {
+
+ /* DMA errors handling.*/
+#if defined(STM32_I2C_DMA_ERROR_HOOK)
+ if ((flags & (STM32_DMA_ISR_TEIF | STM32_DMA_ISR_DMEIF)) != 0) {
+ STM32_I2C_DMA_ERROR_HOOK(i2cp);
+ }
+#else
+ (void)flags;
+#endif
+
+ dmaStreamDisable(i2cp->dmatx);
+}
+
+/**
+ * @brief I2C error handler.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ * @param[in] isr content of the ISR register to be decoded
+ *
+ * @notapi
+ */
+static void i2c_lld_serve_error_interrupt(I2CDriver *i2cp, uint32_t isr) {
+
+ /* Clears interrupt flags just to be safe.*/
+ dmaStreamDisable(i2cp->dmatx);
+ dmaStreamDisable(i2cp->dmarx);
+
+ if (isr & I2C_ISR_BERR)
+ i2cp->errors |= I2CD_BUS_ERROR;
+
+ if (isr & I2C_ISR_ARLO)
+ i2cp->errors |= I2CD_ARBITRATION_LOST;
+
+ if (isr & I2C_ISR_OVR)
+ i2cp->errors |= I2CD_OVERRUN;
+
+ if (isr & I2C_ISR_TIMEOUT)
+ i2cp->errors |= I2CD_TIMEOUT;
+
+ /* If some error has been identified then sends wakes the waiting thread.*/
+ if (i2cp->errors != I2CD_NO_ERROR)
+ wakeup_isr(i2cp, RDY_RESET);
+}
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+#if STM32_I2C_USE_I2C1 || defined(__DOXYGEN__)
+#if defined(STM32_I2C1_GLOBAL_HANDLER) || defined(__DOXYGEN__)
+/**
+ * @brief I2C1 event interrupt handler.
+ *
+ * @notapi
+ */
+CH_IRQ_HANDLER(STM32_I2C1_GLOBAL_HANDLER) {
+ uint32_t isr = I2CD1.i2c->ISR;
+
+ CH_IRQ_PROLOGUE();
+
+ /* Clearing IRQ bits.*/
+ I2CD1.i2c->ICR = isr;
+
+ if (isr & I2C_ERROR_MASK)
+ i2c_lld_serve_error_interrupt(&I2CD1, isr);
+ else if (isr & I2C_INT_MASK)
+ i2c_lld_serve_interrupt(&I2CD1, isr);
+
+ CH_IRQ_EPILOGUE();
+}
+
+#elif defined(STM32_I2C1_EVENT_HANDLER) && defined(STM32_I2C1_ERROR_HANDLER)
+CH_IRQ_HANDLER(STM32_I2C1_EVENT_HANDLER) {
+ uint32_t isr = I2CD1.i2c->ISR;
+
+ CH_IRQ_PROLOGUE();
+
+ /* Clearing IRQ bits.*/
+ I2CD1.i2c->ICR = isr & I2C_INT_MASK;
+
+ i2c_lld_serve_interrupt(&I2CD1, isr);
+
+ CH_IRQ_EPILOGUE();
+}
+
+CH_IRQ_HANDLER(STM32_I2C1_ERROR_HANDLER) {
+ uint32_t isr = I2CD1.i2c->ISR;
+
+ CH_IRQ_PROLOGUE();
+
+ /* Clearing IRQ bits.*/
+ I2CD1.i2c->ICR = isr & I2C_ERROR_MASK;
+
+ i2c_lld_serve_error_interrupt(&I2CD1, isr);
+
+ CH_IRQ_EPILOGUE();
+}
+
+#else
+#error "I2C1 interrupt handlers not defined"
+#endif
+#endif /* STM32_I2C_USE_I2C1 */
+
+#if STM32_I2C_USE_I2C2 || defined(__DOXYGEN__)
+#if defined(STM32_I2C2_GLOBAL_HANDLER) || defined(__DOXYGEN__)
+/**
+ * @brief I2C2 event interrupt handler.
+ *
+ * @notapi
+ */
+CH_IRQ_HANDLER(STM32_I2C2_GLOBAL_HANDLER) {
+ uint32_t isr = I2CD2.i2c->ISR;
+
+ CH_IRQ_PROLOGUE();
+
+ /* Clearing IRQ bits.*/
+ I2CD2.i2c->ICR = isr;
+
+ if (isr & I2C_ERROR_MASK)
+ i2c_lld_serve_error_interrupt(&I2CD2, isr);
+ else if (isr & I2C_INT_MASK)
+ i2c_lld_serve_interrupt(&I2CD2, isr);
+
+ CH_IRQ_EPILOGUE();
+}
+
+#elif defined(STM32_I2C2_EVENT_HANDLER) && defined(STM32_I2C2_ERROR_HANDLER)
+CH_IRQ_HANDLER(STM32_I2C2_EVENT_HANDLER) {
+ uint32_t isr = I2CD2.i2c->ISR;
+
+ CH_IRQ_PROLOGUE();
+
+ /* Clearing IRQ bits.*/
+ I2CD2.i2c->ICR = isr & I2C_INT_MASK;
+
+ i2c_lld_serve_interrupt(&I2CD2, isr);
+
+ CH_IRQ_EPILOGUE();
+}
+
+CH_IRQ_HANDLER(STM32_I2C2_ERROR_HANDLER) {
+ uint32_t isr = I2CD2.i2c->ISR;
+
+ CH_IRQ_PROLOGUE();
+
+ /* Clearing IRQ bits.*/
+ I2CD2.i2c->ICR = isr & I2C_ERROR_MASK;
+
+ i2c_lld_serve_error_interrupt(&I2CD2, isr);
+
+ CH_IRQ_EPILOGUE();
+}
+
+#else
+#error "I2C2 interrupt handlers not defined"
+#endif
+#endif /* STM32_I2C_USE_I2C2 */
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level I2C driver initialization.
+ *
+ * @notapi
+ */
+void i2c_lld_init(void) {
+
+#if STM32_I2C_USE_I2C1
+ i2cObjectInit(&I2CD1);
+ I2CD1.thread = NULL;
+ I2CD1.i2c = I2C1;
+ I2CD1.dmarx = STM32_DMA_STREAM(STM32_I2C_I2C1_RX_DMA_STREAM);
+ I2CD1.dmatx = STM32_DMA_STREAM(STM32_I2C_I2C1_TX_DMA_STREAM);
+#endif /* STM32_I2C_USE_I2C1 */
+
+#if STM32_I2C_USE_I2C2
+ i2cObjectInit(&I2CD2);
+ I2CD2.thread = NULL;
+ I2CD2.i2c = I2C2;
+ I2CD2.dmarx = STM32_DMA_STREAM(STM32_I2C_I2C2_RX_DMA_STREAM);
+ I2CD2.dmatx = STM32_DMA_STREAM(STM32_I2C_I2C2_TX_DMA_STREAM);
+#endif /* STM32_I2C_USE_I2C2 */
+}
+
+/**
+ * @brief Configures and activates the I2C peripheral.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ *
+ * @notapi
+ */
+void i2c_lld_start(I2CDriver *i2cp) {
+ I2C_TypeDef *dp = i2cp->i2c;
+
+ i2cp->txdmamode = DMAMODE_COMMON | STM32_DMA_CR_DIR_M2P;
+ i2cp->rxdmamode = DMAMODE_COMMON | STM32_DMA_CR_DIR_P2M;
+
+ /* Make sure I2C peripheral is disabled */
+ dp->CR1 &= ~I2C_CR1_PE;
+
+ /* If in stopped state then enables the I2C and DMA clocks.*/
+ if (i2cp->state == I2C_STOP) {
+
+#if STM32_I2C_USE_I2C1
+ if (&I2CD1 == i2cp) {
+ bool_t b;
+
+ rccResetI2C1();
+ b = dmaStreamAllocate(i2cp->dmarx,
+ STM32_I2C_I2C1_IRQ_PRIORITY,
+ (stm32_dmaisr_t)i2c_lld_serve_rx_end_irq,
+ (void *)i2cp);
+ chDbgAssert(!b, "i2c_lld_start(), #1", "stream already allocated");
+ b = dmaStreamAllocate(i2cp->dmatx,
+ STM32_I2C_I2C1_IRQ_PRIORITY,
+ (stm32_dmaisr_t)i2c_lld_serve_tx_end_irq,
+ (void *)i2cp);
+ chDbgAssert(!b, "i2c_lld_start(), #2", "stream already allocated");
+ rccEnableI2C1(FALSE);
+
+#if defined(STM32_I2C1_GLOBAL_NUMBER) || defined(__DOXYGEN__)
+ nvicEnableVector(STM32_I2C1_GLOBAL_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_I2C_I2C1_IRQ_PRIORITY));
+#elif defined(STM32_I2C1_EVENT_NUMBER) && defined(STM32_I2C1_ERROR_NUMBER)
+ nvicEnableVector(STM32_I2C1_EVENT_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_I2C_I2C1_IRQ_PRIORITY));
+ nvicEnableVector(STM32_I2C1_ERROR_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_I2C_I2C1_IRQ_PRIORITY));
+#else
+#error "I2C1 interrupt numbers not defined"
+#endif
+
+ i2cp->rxdmamode |= STM32_DMA_CR_CHSEL(I2C1_RX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_I2C_I2C1_DMA_PRIORITY);
+ i2cp->txdmamode |= STM32_DMA_CR_CHSEL(I2C1_TX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_I2C_I2C1_DMA_PRIORITY);
+ }
+#endif /* STM32_I2C_USE_I2C1 */
+
+#if STM32_I2C_USE_I2C2
+ if (&I2CD2 == i2cp) {
+ bool_t b;
+
+ rccResetI2C2();
+ b = dmaStreamAllocate(i2cp->dmarx,
+ STM32_I2C_I2C2_IRQ_PRIORITY,
+ (stm32_dmaisr_t)i2c_lld_serve_rx_end_irq,
+ (void *)i2cp);
+ chDbgAssert(!b, "i2c_lld_start(), #3", "stream already allocated");
+ b = dmaStreamAllocate(i2cp->dmatx,
+ STM32_I2C_I2C2_IRQ_PRIORITY,
+ (stm32_dmaisr_t)i2c_lld_serve_tx_end_irq,
+ (void *)i2cp);
+ chDbgAssert(!b, "i2c_lld_start(), #4", "stream already allocated");
+ rccEnableI2C2(FALSE);
+
+#if defined(STM32_I2C2_GLOBAL_NUMBER) || defined(__DOXYGEN__)
+ nvicEnableVector(STM32_I2C2_GLOBAL_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_I2C_I2C2_IRQ_PRIORITY));
+#elif defined(STM32_I2C2_EVENT_NUMBER) && defined(STM32_I2C2_ERROR_NUMBER)
+ nvicEnableVector(STM32_I2C2_EVENT_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_I2C_I2C2_IRQ_PRIORITY));
+ nvicEnableVector(STM32_I2C2_ERROR_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_I2C_I2C2_IRQ_PRIORITY));
+#else
+#error "I2C2 interrupt numbers not defined"
+#endif
+
+ i2cp->rxdmamode |= STM32_DMA_CR_CHSEL(I2C2_RX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_I2C_I2C2_DMA_PRIORITY);
+ i2cp->txdmamode |= STM32_DMA_CR_CHSEL(I2C2_TX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_I2C_I2C2_DMA_PRIORITY);
+ }
+#endif /* STM32_I2C_USE_I2C2 */
+ }
+
+ /* I2C registers pointed by the DMA.*/
+ dmaStreamSetPeripheral(i2cp->dmarx, &dp->RXDR);
+ dmaStreamSetPeripheral(i2cp->dmatx, &dp->TXDR);
+
+ /* Reset i2c peripheral, the TCIE bit will be handled separately.*/
+ dp->CR1 = i2cp->config->cr1 | I2C_CR1_ERRIE | I2C_CR1_STOPIE |
+ I2C_CR1_NACKIE | I2C_CR1_TXDMAEN | I2C_CR1_RXDMAEN;
+
+ /* Set slave address field (master mode) */
+ dp->CR2 = (i2cp->config->cr2 & ~I2C_CR2_SADD);
+
+ /* Setup I2C parameters.*/
+ dp->TIMINGR = i2cp->config->timingr;
+
+ /* Ready to go.*/
+ dp->CR1 |= I2C_CR1_PE;
+}
+
+/**
+ * @brief Deactivates the I2C peripheral.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ *
+ * @notapi
+ */
+void i2c_lld_stop(I2CDriver *i2cp) {
+
+ /* If not in stopped state then disables the I2C clock.*/
+ if (i2cp->state != I2C_STOP) {
+
+ /* I2C disable.*/
+ i2c_lld_abort_operation(i2cp);
+ dmaStreamRelease(i2cp->dmatx);
+ dmaStreamRelease(i2cp->dmarx);
+
+#if STM32_I2C_USE_I2C1
+ if (&I2CD1 == i2cp) {
+#if defined(STM32_I2C1_GLOBAL_NUMBER) || defined(__DOXYGEN__)
+ nvicDisableVector(STM32_I2C1_GLOBAL_NUMBER);
+#elif defined(STM32_I2C1_EVENT_NUMBER) && defined(STM32_I2C1_ERROR_NUMBER)
+ nvicDisableVector(STM32_I2C1_EVENT_NUMBER);
+ nvicDisableVector(STM32_I2C1_ERROR_NUMBER);
+#else
+#error "I2C1 interrupt numbers not defined"
+#endif
+
+ rccDisableI2C1(FALSE);
+ }
+#endif
+
+#if STM32_I2C_USE_I2C2
+ if (&I2CD2 == i2cp) {
+#if defined(STM32_I2C2_GLOBAL_NUMBER) || defined(__DOXYGEN__)
+ nvicDisableVector(STM32_I2C2_GLOBAL_NUMBER);
+#elif defined(STM32_I2C2_EVENT_NUMBER) && defined(STM32_I2C2_ERROR_NUMBER)
+ nvicDisableVector(STM32_I2C2_EVENT_NUMBER);
+ nvicDisableVector(STM32_I2C2_ERROR_NUMBER);
+#else
+#error "I2C2 interrupt numbers not defined"
+#endif
+
+ rccDisableI2C2(FALSE);
+ }
+#endif
+ }
+}
+
+/**
+ * @brief Receives data via the I2C bus as master.
+ * @details Number of receiving bytes must be more than 1 on STM32F1x. This is
+ * hardware restriction.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ * @param[in] addr slave device address
+ * @param[out] rxbuf pointer to the receive buffer
+ * @param[in] rxbytes number of bytes to be received
+ * @param[in] timeout the number of ticks before the operation timeouts,
+ * the following special values are allowed:
+ * - @a TIME_INFINITE no timeout.
+ * .
+ * @return The operation status.
+ * @retval RDY_OK if the function succeeded.
+ * @retval RDY_RESET if one or more I2C errors occurred, the errors can
+ * be retrieved using @p i2cGetErrors().
+ * @retval RDY_TIMEOUT if a timeout occurred before operation end. <b>After a
+ * timeout the driver must be stopped and restarted
+ * because the bus is in an uncertain state</b>.
+ *
+ * @notapi
+ */
+msg_t i2c_lld_master_receive_timeout(I2CDriver *i2cp, i2caddr_t addr,
+ uint8_t *rxbuf, size_t rxbytes,
+ systime_t timeout) {
+ I2C_TypeDef *dp = i2cp->i2c;
+ VirtualTimer vt;
+ uint32_t addr_cr2 = addr & I2C_CR2_SADD;
+
+ chDbgCheck((rxbytes > 0), "i2c_lld_master_receive_timeout");
+
+ /* Resetting error flags for this transfer.*/
+ i2cp->errors = I2CD_NO_ERROR;
+
+ /* Global timeout for the whole operation.*/
+ if (timeout != TIME_INFINITE)
+ chVTSetI(&vt, timeout, i2c_lld_safety_timeout, (void *)i2cp);
+
+ /* Releases the lock from high level driver.*/
+ chSysUnlock();
+
+ /* Waits until BUSY flag is reset and the STOP from the previous operation
+ is completed, alternatively for a timeout condition.*/
+ while (dp->ISR & I2C_ISR_BUSY) {
+ chSysLock();
+ if ((timeout != TIME_INFINITE) && !chVTIsArmedI(&vt))
+ return RDY_TIMEOUT;
+ chSysUnlock();
+ }
+
+ /* This lock will be released in high level driver.*/
+ chSysLock();
+
+ /* Adjust slave address (master mode) for 7-bit address mode */
+ if ((i2cp->config->cr2 & I2C_CR2_ADD10) == 0)
+ addr_cr2 = (addr_cr2 & 0x7f) << 1;
+
+ /* Set slave address field (master mode) */
+ dp->CR2 &= ~(I2C_CR2_SADD | I2C_CR2_NBYTES);
+ dp->CR2 |= (rxbytes << 16) | addr_cr2;
+
+ /* Initializes driver fields */
+ i2cp->errors = 0;
+
+ /* RX DMA setup.*/
+ dmaStreamSetMode(i2cp->dmarx, i2cp->rxdmamode);
+ dmaStreamSetMemory0(i2cp->dmarx, rxbuf);
+ dmaStreamSetTransactionSize(i2cp->dmarx, rxbytes);
+
+ /* Enable RX DMA */
+ dmaStreamEnable(i2cp->dmarx);
+
+ /* Atomic check on the timer in order to make sure that a timeout didn't
+ happen outside the critical zone.*/
+ if ((timeout != TIME_INFINITE) && !chVTIsArmedI(&vt))
+ return RDY_TIMEOUT;
+
+ /* Starts the operation.*/
+ dp->CR2 |= I2C_CR2_RD_WRN;
+ dp->CR2 |= I2C_CR2_START;
+
+ /* Waits for the operation completion or a timeout.*/
+ i2cp->thread = chThdSelf();
+ chSchGoSleepS(THD_STATE_SUSPENDED);
+ if ((timeout != TIME_INFINITE) && chVTIsArmedI(&vt))
+ chVTResetI(&vt);
+
+ return chThdSelf()->p_u.rdymsg;
+}
+
+/**
+ * @brief Transmits data via the I2C bus as master.
+ * @details Number of receiving bytes must be 0 or more than 1 on STM32F1x.
+ * This is hardware restriction.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ * @param[in] addr slave device address
+ * @param[in] txbuf pointer to the transmit buffer
+ * @param[in] txbytes number of bytes to be transmitted
+ * @param[out] rxbuf pointer to the receive buffer
+ * @param[in] rxbytes number of bytes to be received
+ * @param[in] timeout the number of ticks before the operation timeouts,
+ * the following special values are allowed:
+ * - @a TIME_INFINITE no timeout.
+ * .
+ * @return The operation status.
+ * @retval RDY_OK if the function succeeded.
+ * @retval RDY_RESET if one or more I2C errors occurred, the errors can
+ * be retrieved using @p i2cGetErrors().
+ * @retval RDY_TIMEOUT if a timeout occurred before operation end. <b>After a
+ * timeout the driver must be stopped and restarted
+ * because the bus is in an uncertain state</b>.
+ *
+ * @notapi
+ */
+msg_t i2c_lld_master_transmit_timeout(I2CDriver *i2cp, i2caddr_t addr,
+ const uint8_t *txbuf, size_t txbytes,
+ uint8_t *rxbuf, size_t rxbytes,
+ systime_t timeout) {
+ I2C_TypeDef *dp = i2cp->i2c;
+ VirtualTimer vt;
+ uint32_t addr_cr2 = addr & I2C_CR2_SADD;
+
+ chDbgCheck(((rxbytes == 0) || ((rxbytes > 0) && (rxbuf != NULL))),
+ "i2c_lld_master_transmit_timeout");
+
+ /* Resetting error flags for this transfer.*/
+ i2cp->errors = I2CD_NO_ERROR;
+
+ /* Global timeout for the whole operation.*/
+ if (timeout != TIME_INFINITE)
+ chVTSetI(&vt, timeout, i2c_lld_safety_timeout, (void *)i2cp);
+
+ /* Releases the lock from high level driver.*/
+ chSysUnlock();
+
+ /* Waits until BUSY flag is reset and the STOP from the previous operation
+ is completed, alternatively for a timeout condition.*/
+ while (dp->ISR & I2C_ISR_BUSY) {
+ chSysLock();
+ if ((timeout != TIME_INFINITE) && !chVTIsArmedI(&vt))
+ return RDY_TIMEOUT;
+ chSysUnlock();
+ }
+
+ /* This lock will be released in high level driver.*/
+ chSysLock();
+
+ /* Adjust slave address (master mode) for 7-bit address mode */
+ if ((i2cp->config->cr2 & I2C_CR2_ADD10) == 0)
+ addr_cr2 = (addr_cr2 & 0x7f) << 1;
+
+ /* Set slave address field (master mode) */
+ dp->CR2 &= ~(I2C_CR2_SADD | I2C_CR2_NBYTES);
+ dp->CR2 |= (txbytes << 16) | addr_cr2;
+
+ /* Initializes driver fields */
+ i2cp->errors = 0;
+
+ /* TX DMA setup.*/
+ dmaStreamSetMode(i2cp->dmatx, i2cp->txdmamode);
+ dmaStreamSetMemory0(i2cp->dmatx, txbuf);
+ dmaStreamSetTransactionSize(i2cp->dmatx, txbytes);
+
+ /* RX DMA setup.*/
+ dmaStreamSetMode(i2cp->dmarx, i2cp->rxdmamode);
+ dmaStreamSetMemory0(i2cp->dmarx, rxbuf);
+ dmaStreamSetTransactionSize(i2cp->dmarx, rxbytes);
+
+ /* Enable TX DMA */
+ dmaStreamEnable(i2cp->dmatx);
+
+ /* Atomic check on the timer in order to make sure that a timeout didn't
+ happen outside the critical zone.*/
+ if ((timeout != TIME_INFINITE) && !chVTIsArmedI(&vt))
+ return RDY_TIMEOUT;
+
+ /* Transmission complete interrupt enabled.*/
+ dp->CR1 |= I2C_CR1_TCIE;
+
+ /* Starts the operation as the very last thing.*/
+ dp->CR2 &= ~I2C_CR2_RD_WRN;
+ dp->CR2 |= I2C_CR2_START;
+
+ /* Waits for the operation completion or a timeout.*/
+ i2cp->thread = chThdSelf();
+ chSchGoSleepS(THD_STATE_SUSPENDED);
+ if ((timeout != TIME_INFINITE) && chVTIsArmedI(&vt))
+ chVTResetI(&vt);
+
+ return chThdSelf()->p_u.rdymsg;
+}
+
+#endif /* HAL_USE_I2C */
+
+/** @} */
diff --git a/os/hal/platforms/STM32/I2Cv2/i2c_lld.h b/os/hal/platforms/STM32/I2Cv2/i2c_lld.h new file mode 100644 index 000000000..810c7be84 --- /dev/null +++ b/os/hal/platforms/STM32/I2Cv2/i2c_lld.h @@ -0,0 +1,338 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+/*
+ Concepts and parts of this file have been contributed by Uladzimir Pylinsky
+ aka barthess.
+ */
+
+/**
+ * @file STM32/I2Cv2/i2c_lld.h
+ * @brief STM32 I2C subsystem low level driver header.
+ *
+ * @addtogroup I2C
+ * @{
+ */
+
+#ifndef _I2C_LLD_H_
+#define _I2C_LLD_H_
+
+#if HAL_USE_I2C || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/**
+ * @name TIMINGR register definitions
+ * @{
+ */
+#define STM32_TIMINGR_PRESC_MASK (15U << 28)
+#define STM32_TIMINGR_PRESC(n) ((n) << 28)
+#define STM32_TIMINGR_SCLDEL_MASK (15U << 20)
+#define STM32_TIMINGR_SCLDEL(n) ((n) << 20)
+#define STM32_TIMINGR_SDADEL_MASK (15U << 16)
+#define STM32_TIMINGR_SDADEL(n) ((n) << 16)
+#define STM32_TIMINGR_SCLH_MASK (255U << 8)
+#define STM32_TIMINGR_SCLH(n) ((n) << 8)
+#define STM32_TIMINGR_SCLL_MASK (255U << 0)
+#define STM32_TIMINGR_SCLL(n) ((n) << 0)
+/** @} */
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @name Configuration options
+ * @{
+ */
+/**
+ * @brief I2C1 driver enable switch.
+ * @details If set to @p TRUE the support for I2C1 is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(STM32_I2C_USE_I2C1) || defined(__DOXYGEN__)
+#define STM32_I2C_USE_I2C1 FALSE
+#endif
+
+/**
+ * @brief I2C2 driver enable switch.
+ * @details If set to @p TRUE the support for I2C2 is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(STM32_I2C_USE_I2C2) || defined(__DOXYGEN__)
+#define STM32_I2C_USE_I2C2 FALSE
+#endif
+
+/**
+ * @brief I2C1 interrupt priority level setting.
+ */
+#if !defined(STM32_I2C_I2C1_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_I2C_I2C1_IRQ_PRIORITY 10
+#endif
+
+/**
+ * @brief I2C2 interrupt priority level setting.
+ */
+#if !defined(STM32_I2C_I2C2_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_I2C_I2C2_IRQ_PRIORITY 10
+#endif
+
+/**
+ * @brief I2C1 DMA priority (0..3|lowest..highest).
+ * @note The priority level is used for both the TX and RX DMA streams but
+ * because of the streams ordering the RX stream has always priority
+ * over the TX stream.
+ */
+#if !defined(STM32_I2C_I2C1_DMA_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_I2C_I2C1_DMA_PRIORITY 1
+#endif
+
+/**
+ * @brief I2C2 DMA priority (0..3|lowest..highest).
+ * @note The priority level is used for both the TX and RX DMA streams but
+ * because of the streams ordering the RX stream has always priority
+ * over the TX stream.
+ */
+#if !defined(STM32_I2C_I2C2_DMA_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_I2C_I2C2_DMA_PRIORITY 1
+#endif
+
+/**
+ * @brief I2C DMA error hook.
+ * @note The default action for DMA errors is a system halt because DMA
+ * error can only happen because programming errors.
+ */
+#if !defined(STM32_I2C_DMA_ERROR_HOOK) || defined(__DOXYGEN__)
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp) chSysHalt()
+#endif
+/** @} */
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+/* Streams for the DMA peripheral.*/
+#if defined(STM32F0XX)
+#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
+#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+
+#elif defined(STM32F30X) || defined(STM32F37X)
+#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
+#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
+#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+
+#else
+#error "device unsupported by I2Cv2 driver"
+#endif
+
+/** @brief error checks */
+#if STM32_I2C_USE_I2C1 && !STM32_HAS_I2C1
+#error "I2C1 not present in the selected device"
+#endif
+
+#if STM32_I2C_USE_I2C2 && !STM32_HAS_I2C2
+#error "I2C2 not present in the selected device"
+#endif
+
+#if !STM32_I2C_USE_I2C1 && !STM32_I2C_USE_I2C2
+#error "I2C driver activated but no I2C peripheral assigned"
+#endif
+
+#if STM32_I2C_USE_I2C1 && \
+ !STM32_DMA_IS_VALID_ID(STM32_I2C_I2C1_RX_DMA_STREAM, \
+ STM32_I2C1_RX_DMA_MSK)
+#error "invalid DMA stream associated to I2C1 RX"
+#endif
+
+#if STM32_I2C_USE_I2C1 && \
+ !STM32_DMA_IS_VALID_ID(STM32_I2C_I2C1_TX_DMA_STREAM, \
+ STM32_I2C1_TX_DMA_MSK)
+#error "invalid DMA stream associated to I2C1 TX"
+#endif
+
+#if STM32_I2C_USE_I2C2 && \
+ !STM32_DMA_IS_VALID_ID(STM32_I2C_I2C2_RX_DMA_STREAM, \
+ STM32_I2C2_RX_DMA_MSK)
+#error "invalid DMA stream associated to I2C2 RX"
+#endif
+
+#if STM32_I2C_USE_I2C2 && \
+ !STM32_DMA_IS_VALID_ID(STM32_I2C_I2C2_TX_DMA_STREAM, \
+ STM32_I2C2_TX_DMA_MSK)
+#error "invalid DMA stream associated to I2C2 TX"
+#endif
+
+#if !defined(STM32_DMA_REQUIRED)
+#define STM32_DMA_REQUIRED
+#endif
+
+/* Check clock range. */
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief Type representing I2C address.
+ */
+typedef uint16_t i2caddr_t;
+
+/**
+ * @brief I2C Driver condition flags type.
+ */
+typedef uint32_t i2cflags_t;
+
+/**
+ * @brief Driver configuration structure.
+ */
+typedef struct {
+ /**
+ * @brief TIMINGR register initialization.
+ * @note Refer to the STM32 reference manual, the values are affected
+ * by the system clock settings in mcuconf.h.
+ */
+ uint32_t timingr;
+ /**
+ * @brief CR1 register initialization.
+ * @note Leave to zero unless you know what you are doing.
+ */
+ uint32_t cr1;
+ /**
+ * @brief CR2 register initialization.
+ * @note Only the ADD10 bit can eventually be specified here.
+ */
+ uint32_t cr2;
+} I2CConfig;
+
+/**
+ * @brief Type of a structure representing an I2C driver.
+ */
+typedef struct I2CDriver I2CDriver;
+
+/**
+ * @brief Structure representing an I2C driver.
+ */
+struct I2CDriver{
+ /**
+ * @brief Driver state.
+ */
+ i2cstate_t state;
+ /**
+ * @brief Current configuration data.
+ */
+ const I2CConfig *config;
+ /**
+ * @brief Error flags.
+ */
+ i2cflags_t errors;
+#if I2C_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__)
+#if CH_USE_MUTEXES || defined(__DOXYGEN__)
+ /**
+ * @brief Mutex protecting the bus.
+ */
+ Mutex mutex;
+#elif CH_USE_SEMAPHORES
+ Semaphore semaphore;
+#endif
+#endif /* I2C_USE_MUTUAL_EXCLUSION */
+#if defined(I2C_DRIVER_EXT_FIELDS)
+ I2C_DRIVER_EXT_FIELDS
+#endif
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Thread waiting for I/O completion.
+ */
+ Thread *thread;
+ /**
+ * @brief Current slave address without R/W bit.
+ */
+ i2caddr_t addr;
+ /**
+ * @brief RX DMA mode bit mask.
+ */
+ uint32_t rxdmamode;
+ /**
+ * @brief TX DMA mode bit mask.
+ */
+ uint32_t txdmamode;
+ /**
+ * @brief Receive DMA channel.
+ */
+ const stm32_dma_stream_t *dmarx;
+ /**
+ * @brief Transmit DMA channel.
+ */
+ const stm32_dma_stream_t *dmatx;
+ /**
+ * @brief Pointer to the I2Cx registers block.
+ */
+ I2C_TypeDef *i2c;
+};
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/**
+ * @brief Get errors from I2C driver.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ *
+ * @notapi
+ */
+#define i2c_lld_get_errors(i2cp) ((i2cp)->errors)
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#if !defined(__DOXYGEN__)
+#if STM32_I2C_USE_I2C1
+extern I2CDriver I2CD1;
+#endif
+
+#if STM32_I2C_USE_I2C2
+extern I2CDriver I2CD2;
+#endif
+
+#endif /* !defined(__DOXYGEN__) */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void i2c_lld_init(void);
+ void i2c_lld_start(I2CDriver *i2cp);
+ void i2c_lld_stop(I2CDriver *i2cp);
+ msg_t i2c_lld_master_transmit_timeout(I2CDriver *i2cp, i2caddr_t addr,
+ const uint8_t *txbuf, size_t txbytes,
+ uint8_t *rxbuf, size_t rxbytes,
+ systime_t timeout);
+ msg_t i2c_lld_master_receive_timeout(I2CDriver *i2cp, i2caddr_t addr,
+ uint8_t *rxbuf, size_t rxbytes,
+ systime_t timeout);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_I2C */
+
+#endif /* _I2C_LLD_H_ */
+
+/** @} */
|