diff options
Diffstat (limited to 'os/hal/platforms/STM32/I2Cv1')
-rw-r--r-- | os/hal/platforms/STM32/I2Cv1/i2c_lld.c | 1104 | ||||
-rw-r--r-- | os/hal/platforms/STM32/I2Cv1/i2c_lld.h | 322 |
2 files changed, 0 insertions, 1426 deletions
diff --git a/os/hal/platforms/STM32/I2Cv1/i2c_lld.c b/os/hal/platforms/STM32/I2Cv1/i2c_lld.c deleted file mode 100644 index 1f1664cec..000000000 --- a/os/hal/platforms/STM32/I2Cv1/i2c_lld.c +++ /dev/null @@ -1,1104 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010, - 2011 Giovanni Di Sirio. - - This file is part of ChibiOS/RT. - - ChibiOS/RT is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - ChibiOS/RT is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ -/* - Concepts and parts of this file have been contributed by Uladzimir Pylinsky - aka barthess. - */ - -/** - * @file STM32/i2c_lld.c - * @brief STM32 I2C subsystem low level driver source. Slave mode not implemented. - * @addtogroup I2C - * @{ - */ - -#include "ch.h" -#include "hal.h" -#include "i2c_lld.h" - -#if HAL_USE_I2C || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Datasheet notes. */ -/*===========================================================================*/ -/** - * From RM0008.pdf - * - * Note: - * When the STOP, START or PEC bit is set, the software must NOT perform - * any write access to I2C_CR1 before this bit is cleared by hardware. - * Otherwise there is a risk of setting a second STOP, START or PEC request. - */ - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ -#define I2C_STOP_GPT_TIMEOUT 50 /* waiting timer value */ -#define I2C_START_GPT_TIMEOUT 50 /* waiting timer value */ -#define I2C_POLLING_TIMEOUT 0xFFFF - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/** @brief I2C1 driver identifier.*/ -#if STM32_I2C_USE_I2C1 || defined(__DOXYGEN__) -I2CDriver I2CD1; -#endif - -/** @brief I2C2 driver identifier.*/ -#if STM32_I2C_USE_I2C2 || defined(__DOXYGEN__) -I2CDriver I2CD2; -#endif - -/*===========================================================================*/ -/* Driver local variables. */ -/*===========================================================================*/ - -/* Debugging variables */ -#if CH_DBG_ENABLE_ASSERTS -static volatile uint16_t dbgSR1 = 0; -static volatile uint16_t dbgSR2 = 0; -static volatile uint16_t dbgCR1 = 0; -static volatile uint16_t dbgCR2 = 0; -#endif /* CH_DBG_ENABLE_ASSERTS */ - -/* defines for convenience purpose */ -#if I2C_SUPPORTS_CALLBACKS -#define txBuffp (i2cp->txbuff_p) -#define rxBuffp (i2cp->rxbuff_p) -#endif /* I2C_SUPPORTS_CALLBACKS */ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ -#if I2C_SUPPORTS_CALLBACKS -#if (!(STM32_I2C_I2C1_USE_POLLING_WAIT)) && STM32_I2C_USE_I2C1 -/* I2C1 GPT callback. */ -static void i2c1gptcb(GPTDriver *gptp) { - (void)gptp; - I2CDriver *i2cp = &I2CD1; - - chSysLockFromIsr(); - i2cp->flags &= ~I2C_FLG_TIMER_ARMED; - - switch(i2cp->id_state){ - case I2C_ACTIVE_TRANSMIT: - i2c_lld_master_transmit(i2cp, i2cp->slave_addr, i2cp->txbuf, i2cp->txbytes, i2cp->rxbuf, i2cp->rxbytes); - break; - - case I2C_ACTIVE_RECEIVE: - i2c_lld_master_receive(i2cp, i2cp->slave_addr, i2cp->rxbuf, i2cp->rxbytes); - break; - - case I2C_ACTIVE_TRANSCEIVE: - i2c_lld_master_transceive(i2cp); - break; - - default: - break; - } - chSysUnlockFromIsr(); -} -/* I2C1 GPT configuration. */ -static const GPTConfig i2c1gptcfg = { - 1000000, /* 1MHz timer clock.*/ - i2c1gptcb /* Timer callback.*/ -}; -#endif /* STM32_I2C_I2C1_USE_POLLING_WAIT */ - -#if (!(STM32_I2C_I2C2_USE_POLLING_WAIT)) && STM32_I2C_USE_I2C2 -/* I2C2 GPT callback. */ -static void i2c2gptcb(GPTDriver *gptp) { - (void)gptp; - I2CDriver *i2cp = &I2CD2; - - chSysLockFromIsr(); - i2cp->flags &= ~I2C_FLG_TIMER_ARMED; - - switch(i2cp->id_state){ - case I2C_ACTIVE_TRANSMIT: - i2c_lld_master_transmit(i2cp, i2cp->slave_addr, i2cp->txbuf, i2cp->txbytes, i2cp->rxbuf, i2cp->rxbytes); - break; - - case I2C_ACTIVE_RECEIVE: - i2c_lld_master_receive(i2cp, i2cp->slave_addr, i2cp->rxbuf, i2cp->rxbytes); - break; - - case I2C_ACTIVE_TRANSCEIVE: - i2c_lld_master_transceive(i2cp); - break; - - default: - break; - } - chSysUnlockFromIsr(); -} -/* I2C2 GPT configuration. */ -static const GPTConfig i2c2gptcfg = { - 1000000, /* 1MHz timer clock.*/ - i2c2gptcb /* Timer callback.*/ -}; -#endif /* STM32_I2C_I2C2_USE_POLLING_WAIT */ -#endif /* I2C_SUPPORTS_CALLBACKS */ - -/** - * @brief Function for I2C debugging purpose. - * @note Internal use only. - * - * @param[in] i2cp pointer to the @p I2CDriver object - * - * @notapi - */ -#if CH_DBG_ENABLE_ASSERTS -void _i2c_unhandled_case(I2CDriver *i2cp){ - dbgCR1 = i2cp->id_i2c->CR1; - dbgCR2 = i2cp->id_i2c->CR2; - chDbgAssert((dbgSR1 + dbgSR2) == 0, - "i2c_serve_event_interrupt(), #1", - "unhandled case"); -} -#else -#define _i2c_unhandled_case(i2cp) -#endif /* CH_DBG_ENABLE_ASSERTS */ - -#if I2C_SUPPORTS_CALLBACKS -/** - * @brief Return the last event value from I2C status registers. - * @note Internal use only. - * - * @param[in] i2cp pointer to the @p I2CDriver object - * - * @notapi - */ -static uint32_t i2c_get_event(I2CDriver *i2cp){ - uint16_t regSR1 = i2cp->id_i2c->SR1; - uint16_t regSR2 = i2cp->id_i2c->SR2; - #if CH_DBG_ENABLE_ASSERTS - dbgSR1 = regSR1; - dbgSR2 = regSR2; - #endif /* CH_DBG_ENABLE_ASSERTS */ - - return (I2C_EV_MASK & (regSR1 | (regSR2 << 16))); -} - -/** - * @brief Handle the flags/interrupts. - * @note Internal use only. - * - * @param[in] i2cp pointer to the @p I2CDriver object - * - * @notapi - */ -void _i2c_ev6_master_rec_mode_selected(I2CDriver *i2cp){ - I2C_TypeDef *dp = i2cp->id_i2c; - - switch(i2cp->flags & EV6_SUBEV_MASK) { - - case I2C_EV6_3_MASTER_REC_1BTR_MODE_SELECTED: /* only an single byte to receive */ - dp->CR1 &= (uint16_t)~I2C_CR1_ACK; /* Clear ACK */ - dp->CR1 |= I2C_CR1_STOP; /* Program the STOP */ - break; - - case I2C_EV6_1_MASTER_REC_2BTR_MODE_SELECTED: /* only two bytes to receive */ - dp->CR1 &= (uint16_t)~I2C_CR1_ACK; /* Clear ACK */ - dp->CR2 &= (uint16_t)~I2C_CR2_ITBUFEN; /* Disable the ITBUF in order to have only the BTF interrupt */ - break; - - default: /* more than 2 bytes to receive */ - break; - } -} - -/** - * @brief Handle cases of 2 or 3 bytes receiving. - * @note Internal use only. - * - * @param[in] i2cp pointer to the @p I2CDriver object - * - * @notapi - */ -void _i2c_ev7_master_rec_byte_qued(I2CDriver *i2cp){ - I2C_TypeDef *dp = i2cp->id_i2c; - - switch(i2cp->flags & EV7_SUBEV_MASK) { - - case I2C_EV7_2_MASTER_REC_3BYTES_TO_PROCESS: - /* Only for case of three bytes to be received. - * DataN-2 and DataN-1 already received. */ - dp->CR1 &= (uint16_t)~I2C_CR1_ACK; /* Clear ACK */ - *rxBuffp = dp->DR; /* Read the DataN-2. This clear the RXE & BFT flags and launch the DataN exception in the shift register (ending the SCL stretch) */ - rxBuffp++; - chSysLockFromIsr(); - dp->CR1 |= I2C_CR1_STOP; /* Program the STOP */ - *rxBuffp = dp->DR; /* Read the DataN-1 */ - chSysUnlockFromIsr(); - rxBuffp++; - i2cp->rxbytes -= 2; /* Decrement the number of readed bytes */ - i2cp->flags = 0; - dp->CR2 |= I2C_CR2_ITBUFEN; /* ready for read DataN. Enable interrupt for next (and last) RxNE event*/ - break; - - case I2C_EV7_3_MASTER_REC_2BYTES_TO_PROCESS: - /* only for case of two bytes to be received - * DataN-1 and DataN are received */ - dp->CR2 &= (uint16_t)~I2C_CR2_ITEVTEN; - dp->CR2 &= (uint16_t)~I2C_CR2_ITBUFEN; - chSysLockFromIsr(); - dp->CR1 |= I2C_CR1_STOP; /* Program the STOP */ - *rxBuffp = dp->DR; /* Read the DataN-1*/ - rxBuffp++; - *rxBuffp = dp->DR; /* Read the DataN*/ - chSysUnlockFromIsr(); - i2cp->rxbytes = 0; - i2cp->flags = 0; - _i2c_isr_code(i2cp, i2cp->id_slave_config); /* Portable I2C ISR code defined in the high level driver. */ - break; - - case I2C_FLG_MASTER_RECEIVER: - /* Some times in hi load scenarions it is possible to "miss" interrupt - * because STM32 I2C has OR'ed interrupt sources. This case handle that - * scenario. */ - if (i2cp->rxbytes > 3){ - *rxBuffp = dp->DR; - rxBuffp++; - (i2cp->rxbytes)--; - } - else{ - _i2c_unhandled_case(i2cp); - } - break; - - default: - _i2c_unhandled_case(i2cp); - break; - } -} - -/** - * @brief Main I2C interrupt handler. - * @note Internal use only. - * - * @param[in] i2cp pointer to the @p I2CDriver object - * - * @notapi - */ -static void i2c_serve_event_interrupt(I2CDriver *i2cp) { - I2C_TypeDef *dp = i2cp->id_i2c; - - switch(i2c_get_event(i2cp)) { - - case I2C_EV5_MASTER_MODE_SELECT: - i2cp->flags &= ~I2C_FLG_HEADER_SENT; - dp->DR = i2cp->slave_addr1; - break; - - case I2C_EV9_MASTER_ADDR_10BIT: - if(i2cp->flags & I2C_FLG_MASTER_RECEIVER) { - i2cp->slave_addr1 |= 0x01; - i2cp->flags |= I2C_FLG_HEADER_SENT; - } - dp->DR = i2cp->slave_addr2; - break; - - /************************************************************************** - * Master Transmitter part - */ - case I2C_EV6_MASTER_TRA_MODE_SELECTED: - if(i2cp->flags & I2C_FLG_HEADER_SENT){ - dp->CR1 |= I2C_CR1_START; /* re-send the start in 10-Bit address mode */ - break; - } - txBuffp = (uint8_t*)i2cp->txbuf; /* Initialize the transmit buffer pointer */ - i2cp->txbytes--; - if(i2cp->txbytes == 0) { /* If no further data to be sent, disable the I2C ITBUF in order to not have a TxE interrupt */ - dp->CR2 &= (uint16_t)~I2C_CR2_ITBUFEN; - } - dp->DR = *txBuffp; /* EV8_1 write the first data */ - txBuffp++; - break; - - case I2C_EV8_MASTER_BYTE_TRANSMITTING: - if(i2cp->txbytes > 0) { - i2cp->txbytes--; - if(i2cp->txbytes == 0) { /* If no further data to be sent, disable the ITBUF in order to not have a TxE interrupt */ - dp->CR2 &= (uint16_t)~I2C_CR2_ITBUFEN; - } - dp->DR = *txBuffp; - txBuffp++; - } - break; - - case I2C_EV8_2_MASTER_BYTE_TRANSMITTED: - dp->CR2 &= (uint16_t)~I2C_CR2_ITEVTEN; /* Disable ITEVT In order to not have again a BTF IT */ - if (i2cp->rxbytes == 0){ /* if nothing to read then generate stop */ - dp->CR1 |= I2C_CR1_STOP; - _i2c_isr_code(i2cp, i2cp->id_slave_config); /* Portable I2C ISR code defined in the high level driver. */ - } - else{ /* start reading operation */ - i2cp->id_i2c->CR1 |= I2C_CR1_START; /* send start bit */ - i2c_lld_master_transceive(i2cp); - } - break; - - /************************************************************************** - * Master Receiver part - */ - case I2C_EV6_MASTER_REC_MODE_SELECTED: - _i2c_ev6_master_rec_mode_selected(i2cp); - rxBuffp = i2cp->rxbuf; /* Initialize receive buffer pointer */ - break; - - case I2C_EV7_MASTER_REC_BYTE_RECEIVED: - if(i2cp->rxbytes > 3) { - *rxBuffp = dp->DR; /* Read the data register */ - rxBuffp++; - i2cp->rxbytes--; - if(i2cp->rxbytes == 3){ /* Disable the ITBUF in order to have only the BTF interrupt */ - dp->CR2 &= (uint16_t)~I2C_CR2_ITBUFEN; - i2cp->flags |= I2C_FLG_3BTR; - } - } - else if (i2cp->rxbytes == 3){ /* Disable the ITBUF in order to have only the BTF interrupt */ - dp->CR2 &= (uint16_t)~I2C_CR2_ITBUFEN; - i2cp->flags |= I2C_FLG_3BTR; - } - break; - - case I2C_EV7_MASTER_REC_BYTE_QUEUED: - _i2c_ev7_master_rec_byte_qued(i2cp); - break; - - default: /* only 1 byte must to be read to complete trasfer. Stop already sent to bus. */ - chDbgAssert((i2cp->rxbytes) == 1, - "i2c_serve_event_interrupt(), #1", - "more than 1 byte to be received"); - *rxBuffp = dp->DR; /* Read the data register */ - i2cp->rxbytes = 0; - dp->CR2 &= (uint16_t)~I2C_CR2_ITEVTEN; /* disable interrupts */ - dp->CR2 &= (uint16_t)~I2C_CR2_ITBUFEN; - _i2c_isr_code(i2cp, i2cp->id_slave_config); /* Portable I2C ISR code defined in the high level driver.*/ - break; - } -} -#endif /* I2C_SUPPORTS_CALLBACKS */ - -static void i2c_serve_error_interrupt(I2CDriver *i2cp) { - i2cflags_t flags; - I2C_TypeDef *reg; - - reg = i2cp->id_i2c; - flags = I2CD_NO_ERROR; - - if(reg->SR1 & I2C_SR1_BERR) { /* Bus error */ - reg->SR1 &= ~I2C_SR1_BERR; - flags |= I2CD_BUS_ERROR; - } - if(reg->SR1 & I2C_SR1_ARLO) { /* Arbitration lost */ - reg->SR1 &= ~I2C_SR1_ARLO; - flags |= I2CD_ARBITRATION_LOST; - } - if(reg->SR1 & I2C_SR1_AF) { /* Acknowledge fail */ - reg->SR1 &= ~I2C_SR1_AF; - reg->CR1 |= I2C_CR1_STOP; /* setting stop bit */ - while(i2cp->id_i2c->CR1 & I2C_CR1_STOP) - ; - flags |= I2CD_ACK_FAILURE; - } - if(reg->SR1 & I2C_SR1_OVR) { /* Overrun */ - reg->SR1 &= ~I2C_SR1_OVR; - flags |= I2CD_OVERRUN; - } - if(reg->SR1 & I2C_SR1_PECERR) { /* PEC error */ - reg->SR1 &= ~I2C_SR1_PECERR; - flags |= I2CD_PEC_ERROR; - } - if(reg->SR1 & I2C_SR1_TIMEOUT) { /* SMBus Timeout */ - reg->SR1 &= ~I2C_SR1_TIMEOUT; - flags |= I2CD_TIMEOUT; - } - if(reg->SR1 & I2C_SR1_SMBALERT) { /* SMBus alert */ - reg->SR1 &= ~I2C_SR1_SMBALERT; - flags |= I2CD_SMB_ALERT; - } - - if(flags != I2CD_NO_ERROR) { /* send communication end signal */ - chSysLockFromIsr(); - i2cAddFlagsI(i2cp, flags); - chSysUnlockFromIsr(); - #if I2C_SUPPORTS_CALLBACKS - _i2c_isr_err_code(i2cp, i2cp->id_slave_config); - #endif /* I2C_SUPPORTS_CALLBACKS */ - } -} - - -#if STM32_I2C_USE_I2C1 || defined(__DOXYGEN__) -/** - * @brief I2C1 event interrupt handler. - */ -#if I2C_SUPPORTS_CALLBACKS -CH_IRQ_HANDLER(VectorBC) { - - CH_IRQ_PROLOGUE(); - i2c_serve_event_interrupt(&I2CD1); - CH_IRQ_EPILOGUE(); -} -#endif /* I2C_SUPPORTS_CALLBACKS */ -/** - * @brief I2C1 error interrupt handler. - */ -CH_IRQ_HANDLER(VectorC0) { - - CH_IRQ_PROLOGUE(); - i2c_serve_error_interrupt(&I2CD1); - CH_IRQ_EPILOGUE(); -} -#endif /* STM32_I2C_USE_I2C1 */ - -#if STM32_I2C_USE_I2C2 || defined(__DOXYGEN__) -/** - * @brief I2C2 event interrupt handler. - */ -#if I2C_SUPPORTS_CALLBACKS -CH_IRQ_HANDLER(VectorC4) { - - CH_IRQ_PROLOGUE(); - i2c_serve_event_interrupt(&I2CD2); - CH_IRQ_EPILOGUE(); -} -#endif /* I2C_SUPPORTS_CALLBACKS */ -/** - * @brief I2C2 error interrupt handler. - */ -CH_IRQ_HANDLER(VectorC8) { - - CH_IRQ_PROLOGUE(); - i2c_serve_error_interrupt(&I2CD2); - CH_IRQ_EPILOGUE(); -} -#endif /* STM32_I2C_USE_I2C2 */ - -/** - * @brief Low level I2C driver initialization. - */ -void i2c_lld_init(void) { - -#if STM32_I2C_USE_I2C1 - i2cObjectInit(&I2CD1); - I2CD1.id_i2c = I2C1; - -#if I2C_SUPPORTS_CALLBACKS -#if !(STM32_I2C_I2C1_USE_POLLING_WAIT) - I2CD1.timer = &(STM32_I2C_I2C1_USE_GPT_TIM); - I2CD1.timer_cfg = &i2c1gptcfg; -#endif /* !(STM32_I2C_I2C1_USE_POLLING_WAIT) */ -#endif /* I2C_SUPPORTS_CALLBACKS */ - -#endif /* STM32_I2C_USE_I2C */ - -#if STM32_I2C_USE_I2C2 - i2cObjectInit(&I2CD2); - I2CD2.id_i2c = I2C2; - -#if I2C_SUPPORTS_CALLBACKS -#if !(STM32_I2C_I2C2_USE_POLLING_WAIT) - I2CD2.timer = &(STM32_I2C_I2C2_USE_GPT_TIM); - I2CD2.timer_cfg = &i2c2gptcfg; -#endif /* !(STM32_I2C_I2C2_USE_POLLING_WAIT) */ -#endif /* I2C_SUPPORTS_CALLBACKS */ - -#endif /* STM32_I2C_USE_I2C2 */ -} - -/** - * @brief Configures and activates the I2C peripheral. - * - * @param[in] i2cp pointer to the @p I2CDriver object - */ -void i2c_lld_start(I2CDriver *i2cp) { - if (i2cp->id_state == I2C_STOP) { /* If in stopped state then enables the I2C clock.*/ -#if STM32_I2C_USE_I2C1 - if (&I2CD1 == i2cp) { -#if I2C_SUPPORTS_CALLBACKS - nvicEnableVector(I2C1_EV_IRQn, - CORTEX_PRIORITY_MASK(STM32_I2C_I2C1_IRQ_PRIORITY)); -#endif /* I2C_SUPPORTS_CALLBACKS */ - nvicEnableVector(I2C1_ER_IRQn, - CORTEX_PRIORITY_MASK(STM32_I2C_I2C1_IRQ_PRIORITY)); - rccEnableI2C1(FALSE); - } -#endif -#if STM32_I2C_USE_I2C2 - if (&I2CD2 == i2cp) { -#if I2C_SUPPORTS_CALLBACKS - nvicEnableVector(I2C2_EV_IRQn, - CORTEX_PRIORITY_MASK(STM32_I2C_I2C1_IRQ_PRIORITY)); -#endif /* I2C_SUPPORTS_CALLBACKS */ - nvicEnableVector(I2C2_ER_IRQn, - CORTEX_PRIORITY_MASK(STM32_I2C_I2C1_IRQ_PRIORITY)); - rccEnableI2C2(FALSE); - } -#endif - } - - i2cp->id_i2c->CR1 = I2C_CR1_SWRST; /* reset i2c peripherial */ - i2cp->id_i2c->CR1 = 0; - i2c_lld_set_clock(i2cp); - i2c_lld_set_opmode(i2cp); - i2cp->id_i2c->CR1 |= 1; /* enable interface */ -} - -void i2c_lld_reset(I2CDriver *i2cp){ - chDbgCheck((i2cp->id_state == I2C_STOP)||(i2cp->id_state == I2C_READY), - "i2c_lld_reset: invalid state"); - - rccResetI2C1(); -} - - -/** - * @brief Set clock speed. - * - * @param[in] i2cp pointer to the @p I2CDriver object - */ -void i2c_lld_set_clock(I2CDriver *i2cp) { - volatile uint16_t regCCR, regCR2, freq, clock_div; - volatile uint16_t pe_bit_saved; - int32_t clock_speed = i2cp->id_config->clock_speed; - i2cdutycycle_t duty = i2cp->id_config->duty_cycle; - - chDbgCheck((i2cp != NULL) && (clock_speed > 0) && (clock_speed <= 4000000), - "i2c_lld_set_clock"); - - /************************************************************************** - * CR2 Configuration - */ - regCR2 = i2cp->id_i2c->CR2; /* Get the I2Cx CR2 value */ - regCR2 &= (uint16_t)~I2C_CR2_FREQ; /* Clear frequency FREQ[5:0] bits */ - freq = (uint16_t)(STM32_PCLK1 / 1000000); /* Set frequency bits depending on pclk1 value */ -#ifdef STM32F4XX - chDbgCheck((freq >= 2) && (freq <= 42), - "i2c_lld_set_clock() : Peripheral clock freq. out of range"); -#else - chDbgCheck((freq >= 2) && (freq <= 36), - "i2c_lld_set_clock() : Peripheral clock freq. out of range"); -#endif - regCR2 |= freq; - i2cp->id_i2c->CR2 = regCR2; - - /************************************************************************** - * CCR Configuration - */ - pe_bit_saved = (i2cp->id_i2c->CR1 & I2C_CR1_PE); - i2cp->id_i2c->CR1 &= (uint16_t)~I2C_CR1_PE; /* Disable the selected I2C peripheral to configure TRISE */ - regCCR = 0; /* Clear F/S, DUTY and CCR[11:0] bits */ - clock_div = I2C_CCR_CCR; - - if (clock_speed <= 100000) { /* Configure clock_div in standard mode */ - chDbgAssert(duty == STD_DUTY_CYCLE, - "i2c_lld_set_clock(), #1", - "Invalid standard mode duty cycle"); - clock_div = (uint16_t)(STM32_PCLK1 / (clock_speed * 2)); /* Standard mode clock_div calculate: Tlow/Thigh = 1/1 */ - if (clock_div < 0x04) clock_div = 0x04; /* Test if CCR value is under 0x4, and set the minimum allowed value */ - regCCR |= (clock_div & I2C_CCR_CCR); /* Set clock_div value for standard mode */ - i2cp->id_i2c->TRISE = freq + 1; /* Set Maximum Rise Time for standard mode */ - } - else if(clock_speed <= 400000) { /* Configure clock_div in fast mode */ - chDbgAssert((duty == FAST_DUTY_CYCLE_2) || - (duty == FAST_DUTY_CYCLE_16_9), - "i2c_lld_set_clock(), #2", - "Invalid fast mode duty cycle"); - if(duty == FAST_DUTY_CYCLE_2) { - clock_div = (uint16_t)(STM32_PCLK1 / (clock_speed * 3)); /* Fast mode clock_div calculate: Tlow/Thigh = 2/1 */ - } - else if(duty == FAST_DUTY_CYCLE_16_9) { - clock_div = (uint16_t)(STM32_PCLK1 / (clock_speed * 25)); /* Fast mode clock_div calculate: Tlow/Thigh = 16/9 */ - regCCR |= I2C_CCR_DUTY; /* Set DUTY bit */ - } - if(clock_div < 0x01) clock_div = 0x01; /* Test if CCR value is under 0x1, and set the minimum allowed value */ - regCCR |= (I2C_CCR_FS | (clock_div & I2C_CCR_CCR)); /* Set clock_div value and F/S bit for fast mode*/ - i2cp->id_i2c->TRISE = (freq * 300 / 1000) + 1; /* Set Maximum Rise Time for fast mode */ - } - chDbgAssert((clock_div <= I2C_CCR_CCR), - "i2c_lld_set_clock(), #3", "Too low clock clock speed selected"); - - i2cp->id_i2c->CCR = regCCR; /* Write to I2Cx CCR */ - i2cp->id_i2c->CR1 |= pe_bit_saved; /* restore the I2C peripheral enabled state */ -} - -/** - * @brief Set operation mode of I2C hardware. - * - * @param[in] i2cp pointer to the @p I2CDriver object - */ -void i2c_lld_set_opmode(I2CDriver *i2cp) { - i2copmode_t opmode = i2cp->id_config->op_mode; - uint16_t regCR1; - - regCR1 = i2cp->id_i2c->CR1; /* Get the I2Cx CR1 value */ - switch(opmode){ - case OPMODE_I2C: - regCR1 &= (uint16_t)~(I2C_CR1_SMBUS|I2C_CR1_SMBTYPE); - break; - case OPMODE_SMBUS_DEVICE: - regCR1 |= I2C_CR1_SMBUS; - regCR1 &= (uint16_t)~(I2C_CR1_SMBTYPE); - break; - case OPMODE_SMBUS_HOST: - regCR1 |= (I2C_CR1_SMBUS|I2C_CR1_SMBTYPE); - break; - } - - i2cp->id_i2c->CR1 = regCR1; /* Write to I2Cx CR1 */ -} - -/** - * @brief Set own address. - * - * @param[in] i2cp pointer to the @p I2CDriver object - */ -void i2c_lld_set_own_address(I2CDriver *i2cp) { - /* TODO: dual address mode */ - - i2cp->id_i2c->OAR1 |= 1 << 14; - - if (&(i2cp->id_config->own_addr_10) == NULL){ /* only 7-bit address */ - i2cp->id_i2c->OAR1 &= (~I2C_OAR1_ADDMODE); - i2cp->id_i2c->OAR1 |= i2cp->id_config->own_addr_7 << 1; - } - else { - chDbgAssert((i2cp->id_config->own_addr_10 < 1024), - "i2c_lld_set_own_address(), #1", "10-bit address longer then 10 bit") - i2cp->id_i2c->OAR1 |= I2C_OAR1_ADDMODE; - i2cp->id_i2c->OAR1 |= i2cp->id_config->own_addr_10; - } -} - - -/** - * @brief Deactivates the I2C peripheral. - * - * @param[in] i2cp pointer to the @p I2CDriver object - */ -void i2c_lld_stop(I2CDriver *i2cp) { - if (i2cp->id_state == I2C_READY) { /* If in ready state then disables the I2C clock.*/ -#if STM32_I2C_USE_I2C1 - if (&I2CD1 == i2cp) { - nvicDisableVector(I2C1_EV_IRQn); - nvicDisableVector(I2C1_ER_IRQn); - rccDisableI2C1(FALSE); - } -#endif -#if STM32_I2C_USE_I2C2 - if (&I2CD2 == i2cp) { - nvicDisableVector(I2C2_EV_IRQn); - nvicDisableVector(I2C2_ER_IRQn); - rccDisableI2C2(FALSE); - } -#endif - } - - i2cp->id_state = I2C_STOP; -} - - -#if I2C_SUPPORTS_CALLBACKS -/** - * @brief Transmits data via the I2C bus as master. - * - * @param[in] i2cp pointer to the @p I2CDriver object - * @param[in] slave_addr Slave device address. Bits 0-9 contain slave - * device address. Bit 15 must be set to 1 if 10-bit - * addressing modes used. Otherwise keep it cleared. - * Bits 10-14 unused. - * @param[in] txbuf pointer to the transmit buffer - * @param[in] txbytes number of bytes to be transmitted - * @param[in] rxbuf pointer to the receive buffer - * @param[in] rxbytes number of bytes to be received - */ -void i2c_lld_master_transmit(I2CDriver *i2cp, uint16_t slave_addr, - uint8_t *txbuf, size_t txbytes, uint8_t *rxbuf, size_t rxbytes) { - - /* "waiting" for STOP bit routine*/ - #if STM32_I2C_I2C1_USE_POLLING_WAIT - uint32_t timeout = I2C_POLLING_TIMEOUT; - while((i2cp->id_i2c->CR1 & I2C_CR1_STOP) && timeout) - timeout--; - chDbgAssert((timeout > 0), "i2c_lld_master_transmit(), #1", "time to STOP is out"); - #else - chDbgAssert(!(i2cp->flags & I2C_FLG_TIMER_ARMED), "i2c_lld_master_transmit(), #1", "time to STOP is out"); - if ((i2cp->id_i2c->CR1 & I2C_CR1_STOP) && i2cp->timer != NULL && i2cp->timer_cfg != NULL){ - chSysLockFromIsr(); - gptStartOneShotI(i2cp->timer, I2C_STOP_GPT_TIMEOUT); - i2cp->flags |= I2C_FLG_TIMER_ARMED; - chSysUnlockFromIsr(); - return; - } - #endif /* STM32_I2C_I2C1_USE_POLLING_WAIT */ - - /* init driver fields */ - i2cp->slave_addr = slave_addr; - i2cp->txbytes = txbytes; - i2cp->rxbytes = rxbytes; - i2cp->txbuf = txbuf; - i2cp->rxbuf = rxbuf; - - /* init address fields */ - if(slave_addr & 0x8000){ /* 10-bit mode used */ - i2cp->slave_addr1 = ((slave_addr >>7) & 0x0006); /* add the two msb of 10-bit address to the header */ - i2cp->slave_addr1 |= 0xF0; /* add the header bits with LSB = 0 -> write */ - i2cp->slave_addr2 = slave_addr & 0x00FF; /* the remaining 8 bit of 10-bit address */ - } - else{ - i2cp->slave_addr1 = ((slave_addr <<1) & 0x00FE); /* LSB = 0 -> write */ - } - - /* setting flags and register bits */ - i2cp->flags = 0; - i2cp->errors = 0; - i2cp->id_i2c->CR1 &= ~I2C_CR1_POS; - i2cp->id_i2c->CR1 |= I2C_CR1_START; - i2cp->id_i2c->CR2 |= (I2C_CR2_ITERREN|I2C_CR2_ITEVTEN|I2C_CR2_ITBUFEN); /* enable ERR, EVT & BUF ITs */ -} - -/** - * @brief Receives data from the I2C bus. - * - * @param[in] i2cp pointer to the @p I2CDriver object - * @param[in] slave_addr Slave device address. Bits 0-9 contain slave - * device address. Bit 15 must be set to 1 if 10-bit - * addressing modes used. Otherwise keep it cleared. - * Bits 10-14 unused. - * @param[in] rxbuf pointer to the receive buffer - * @param[in] rxbytes number of bytes to be received - */ -void i2c_lld_master_receive(I2CDriver *i2cp, uint16_t slave_addr, - uint8_t *rxbuf, size_t rxbytes){ - - chDbgAssert((i2cp->id_i2c->SR1 + i2cp->id_i2c->SR2) == 0, - "i2c_lld_master_receive(), #1", - "some interrupt sources not clear"); - - /* "waiting" for STOP bit routine*/ - #if STM32_I2C_I2C1_USE_POLLING_WAIT - uint32_t timeout = I2C_POLLING_TIMEOUT; - while((i2cp->id_i2c->CR1 & I2C_CR1_STOP) && timeout) - timeout--; - chDbgAssert((timeout > 0), "i2c_lld_master_receive(), #1", "time to STOP is out"); - #else - chDbgAssert(!(i2cp->flags & I2C_FLG_TIMER_ARMED), "i2c_lld_master_receive(), #1", "time to STOP is out"); - if ((i2cp->id_i2c->CR1 & I2C_CR1_STOP) && i2cp->timer != NULL && i2cp->timer_cfg != NULL){ - chSysLockFromIsr(); - gptStartOneShotI(i2cp->timer, I2C_STOP_GPT_TIMEOUT); - i2cp->flags |= I2C_FLG_TIMER_ARMED; - chSysUnlockFromIsr(); - return; - } - #endif /* STM32_I2C_I2C1_USE_POLLING_WAIT */ - - /* init driver fields */ - i2cp->slave_addr = slave_addr; - i2cp->rxbytes = rxbytes; - i2cp->rxbuf = rxbuf; - - /* init address fields */ - if(slave_addr & 0x8000){ /* 10-bit mode used */ - i2cp->slave_addr1 = ((slave_addr >>7) & 0x0006); /* add the two msb of 10-bit address to the header */ - i2cp->slave_addr1 |= 0xF0; /* add the header bits (the LSB -> 1 will be add to second */ - i2cp->slave_addr2 = slave_addr & 0x00FF; /* the remaining 8 bit of 10-bit address */ - } - else{ - i2cp->slave_addr1 = ((slave_addr <<1) | 0x01); /* LSB = 1 -> receive */ - } - - /* setting flags and register bits */ - i2cp->flags |= I2C_FLG_MASTER_RECEIVER; - i2cp->errors = 0; - - i2cp->id_i2c->CR1 |= I2C_CR1_ACK; /* acknowledge returned */ - i2cp->id_i2c->CR1 &= ~I2C_CR1_POS; - - if(i2cp->rxbytes == 1) { /* Only one byte to be received */ - i2cp->flags |= I2C_FLG_1BTR; - } - else if(i2cp->rxbytes == 2) { /* Only two bytes to be received */ - i2cp->flags |= I2C_FLG_2BTR; - i2cp->id_i2c->CR1 |= I2C_CR1_POS; /* Acknowledge Position */ - } - - i2cp->id_i2c->CR1 |= I2C_CR1_START; /* send start bit */ - i2cp->id_i2c->CR2 |= (I2C_CR2_ITERREN|I2C_CR2_ITEVTEN|I2C_CR2_ITBUFEN); /* enable ERR, EVT & BUF ITs */ -} - - -/** - * @brief Realize read-though-write behavior. - * - * @param[in] i2cp pointer to the @p I2CDriver object - * - * @notapi - */ -void i2c_lld_master_transceive(I2CDriver *i2cp){ - - chDbgAssert((i2cp != NULL) && (i2cp->slave_addr1 != 0) &&\ - (i2cp->rxbytes > 0) && (i2cp->rxbuf != NULL), - "i2c_lld_master_transceive(), #1", - ""); - - i2cp->id_state = I2C_ACTIVE_TRANSCEIVE; - - /* "waiting" for START bit routine*/ - #if STM32_I2C_I2C1_USE_POLLING_WAIT - uint32_t timeout = I2C_POLLING_TIMEOUT; - while((i2cp->id_i2c->CR1 & I2C_CR1_START) && timeout); - timeout--; - chDbgAssert((timeout > 0), "i2c_lld_master_transceive(), #1", "time to START is out"); - #else - chDbgAssert(!(i2cp->flags & I2C_FLG_TIMER_ARMED), "i2c_lld_master_transceive(), #1", "time to START is out"); - if ((i2cp->id_i2c->CR1 & I2C_CR1_START) && i2cp->timer != NULL && i2cp->timer_cfg != NULL){ - chSysLockFromIsr(); - gptStartOneShotI(i2cp->timer, I2C_START_GPT_TIMEOUT); - i2cp->flags |= I2C_FLG_TIMER_ARMED; - chSysUnlockFromIsr(); - return; - } - #endif /* STM32_I2C_I2C1_USE_POLLING_WAIT */ - - /* init address fields */ - if(i2cp->slave_addr & 0x8000){ /* 10-bit mode used */ - i2cp->slave_addr1 = ((i2cp->slave_addr >>7) & 0x0006);/* add the two msb of 10-bit address to the header */ - i2cp->slave_addr1 |= 0xF0; /* add the header bits (the LSB -> 1 will be add to second */ - i2cp->slave_addr2 = i2cp->slave_addr & 0x00FF; /* the remaining 8 bit of 10-bit address */ - } - else{ - i2cp->slave_addr1 |= 0x01; - } - - /* setting flags and register bits */ - i2cp->flags |= I2C_FLG_MASTER_RECEIVER; - i2cp->errors = 0; - i2cp->id_i2c->CR1 |= I2C_CR1_ACK; /* acknowledge returned */ - i2cp->id_i2c->CR1 &= ~I2C_CR1_POS; - - if(i2cp->rxbytes == 1) { /* Only one byte to be received */ - i2cp->flags |= I2C_FLG_1BTR; - } - else if(i2cp->rxbytes == 2) { /* Only two bytes to be received */ - i2cp->flags |= I2C_FLG_2BTR; - i2cp->id_i2c->CR1 |= I2C_CR1_POS; /* Acknowledge Position */ - } - - i2cp->id_i2c->CR2 |= (I2C_CR2_ITERREN|I2C_CR2_ITEVTEN|I2C_CR2_ITBUFEN); /* enable ERR, EVT & BUF ITs */ -} - -#else /*I2C_SUPPORTS_CALLBACKS*/ - -/** - * @brief Synchronously transmits data via the I2C bus as master. - * - * @param[in] i2cp pointer to the @p I2CDriver object - * @param[in] slave_addr Slave device address. Bits 0-9 contain slave - * device address. Bit 15 must be set to 1 if 10-bit - * addressing modes used. Otherwise keep it cleared. - * Bits 10-14 unused. - * @param[in] txbuf pointer to the transmit buffer - * @param[in] txbytes number of bytes to be transmitted - * @param[in] rxbuf pointer to the receive buffer - * @param[in] rxbytes number of bytes to be received - */ -void i2c_lld_master_transmit(I2CDriver *i2cp, uint16_t slave_addr, - uint8_t *txbuf, size_t txbytes, uint8_t *rxbuf, size_t rxbytes) { - - /* init driver fields */ - i2cp->slave_addr = slave_addr; - i2cp->txbytes = txbytes; - i2cp->rxbytes = rxbytes; - i2cp->txbuf = txbuf; - i2cp->rxbuf = rxbuf; - - /* init address fields */ - if(slave_addr & 0x8000){ /* 10-bit mode used */ - i2cp->slave_addr1 = ((slave_addr >>7) & 0x0006); /* add the two msb of 10-bit address to the header */ - i2cp->slave_addr1 |= 0xF0; /* add the header bits with LSB = 0 -> write */ - i2cp->slave_addr2 = slave_addr & 0x00FF; /* the remaining 8 bit of 10-bit address */ - } - else{ - i2cp->slave_addr1 = ((slave_addr <<1) & 0x00FE); /* LSB = 0 -> write */ - } - - i2cp->flags = 0; - i2cp->errors = 0; - i2cp->id_i2c->CR1 &= ~I2C_CR1_POS; - i2cp->id_i2c->CR2 &= ~I2C_CR2_ITEVTEN; /* disable event interrupts */ - i2cp->id_i2c->CR2 |= I2C_CR2_ITERREN; /* enable error interrupts */ - - i2cp->id_i2c->CR1 |= I2C_CR1_START; - while (!(i2cp->id_i2c->SR1 & I2C_SR1_SB)) - ; - i2cp->id_i2c->DR = i2cp->slave_addr1; - while (!(i2cp->id_i2c->SR1 & I2C_SR1_ADDR)) - ; - while (!(i2cp->id_i2c->SR2 & I2C_SR2_BUSY)) - ; - i2cp->id_i2c->DR = *txbuf; - txbuf++; - i2cp->txbytes--; - while(i2cp->txbytes > 0){ - while(!(i2cp->id_i2c->SR1 & I2C_SR1_BTF)) - ; - i2cp->id_i2c->DR = *txbuf; - txbuf++; - i2cp->txbytes--; - } - while(!(i2cp->id_i2c->SR1 & I2C_SR1_BTF)) - ; - if(rxbytes == 0){ - i2cp->id_i2c->CR1 |= I2C_CR1_STOP; - while (i2cp->id_i2c->CR1 & I2C_CR1_STOP) - ; - } - else{ - i2c_lld_master_receive(i2cp, slave_addr, rxbuf, rxbytes); - } -} - - -/** - * @brief Synchronously receives data from the I2C bus. - * - * @param[in] i2cp pointer to the @p I2CDriver object - * @param[in] slave_addr Slave device address. Bits 0-9 contain slave - * device address. Bit 15 must be set to 1 if 10-bit - * addressing modes used. Otherwise keep it cleared. - * Bits 10-14 unused. - * @param[in] rxbuf pointer to the receive buffer - * @param[in] rxbytes number of bytes to be received - */ -void i2c_lld_master_receive(I2CDriver *i2cp, uint16_t slave_addr, - uint8_t *rxbuf, size_t rxbytes){ - - /* init driver fields */ - i2cp->slave_addr = slave_addr; - i2cp->rxbytes = rxbytes; - i2cp->rxbuf = rxbuf; - - /* init address fields */ - if(slave_addr & 0x8000){ /* 10-bit mode used */ - i2cp->slave_addr1 = ((slave_addr >>7) & 0x0006); /* add the two msb of 10-bit address to the header */ - i2cp->slave_addr1 |= 0xF0; /* add the header bits (the LSB -> 1 will be add to second */ - i2cp->slave_addr2 = slave_addr & 0x00FF; /* the remaining 8 bit of 10-bit address */ - } - else{ - i2cp->slave_addr1 = ((slave_addr <<1) | 0x01); /* LSB = 1 -> receive */ - } - - - /* setting flags and register bits */ - i2cp->flags = 0; - i2cp->errors = 0; - i2cp->id_i2c->CR1 &= ~I2C_CR1_POS; - i2cp->id_i2c->CR2 &= ~I2C_CR2_ITEVTEN; /* disable event interrupts */ - i2cp->id_i2c->CR2 |= I2C_CR2_ITERREN; /* enable error interrupts */ - - i2cp->id_i2c->CR1 |= I2C_CR1_START; - while (!(i2cp->id_i2c->SR1 & I2C_SR1_SB)) - ; - - i2cp->id_i2c->DR = i2cp->slave_addr1; - while (!(i2cp->id_i2c->SR1 & I2C_SR1_ADDR)) - ; - - if(i2cp->rxbytes >= 3){ /* more than 2 bytes receiving procedure */ - while(!(i2cp->id_i2c->SR2 & I2C_SR2_BUSY)) /* to clear ADDR bit */ - ; - while(i2cp->rxbytes > 3){ - while(!(i2cp->id_i2c->SR1 & I2C_SR1_BTF)) - ; - *rxbuf = i2cp->id_i2c->DR; - rxbuf++; - i2cp->rxbytes--; - } - while(!(i2cp->id_i2c->SR1 & I2C_SR1_BTF)) /* stopping procedure */ - ; - i2cp->id_i2c->CR1 &= ~I2C_CR1_ACK; - chSysLock(); - i2cp->id_i2c->CR1 |= I2C_CR1_STOP; - *rxbuf = i2cp->id_i2c->DR; - rxbuf++; - i2cp->rxbytes--; - chSysUnlock(); - while(!(i2cp->id_i2c->SR1 & I2C_SR1_RXNE)) - ; - *rxbuf = i2cp->id_i2c->DR; - rxbuf++; - i2cp->rxbytes--; - while (i2cp->id_i2c->CR1 & I2C_CR1_STOP) - ; - i2cp->id_i2c->CR1 |= I2C_CR1_ACK; - } - else{ /* 1 or 2 bytes receiving procedure */ - if(i2cp->rxbytes == 2){ - i2cp->id_i2c->CR1 |= I2C_CR1_POS; - chSysLock(); - while(!(i2cp->id_i2c->SR2 & I2C_SR2_BUSY)) /* to clear ADDR bit */ - ; - i2cp->id_i2c->CR1 &= ~I2C_CR1_ACK; - chSysUnlock(); - while(!(i2cp->id_i2c->SR1 & I2C_SR1_BTF)) - ; - chSysLock(); - i2cp->id_i2c->CR1 |= I2C_CR1_STOP; - *rxbuf = i2cp->id_i2c->DR; - rxbuf++; - i2cp->rxbytes--; - chSysUnlock(); - *rxbuf = i2cp->id_i2c->DR; - rxbuf++; - i2cp->rxbytes--; - while (i2cp->id_i2c->CR1 & I2C_CR1_STOP) - ; - i2cp->id_i2c->CR1 &= ~I2C_CR1_POS; - i2cp->id_i2c->CR1 |= I2C_CR1_ACK; - } - else{ /* 1 byte */ - i2cp->id_i2c->CR1 &= ~I2C_CR1_ACK; - chSysLock(); - while(!(i2cp->id_i2c->SR2 & I2C_SR2_BUSY)) /* to clear ADDR bit */ - ; - i2cp->id_i2c->CR1 |= I2C_CR1_STOP; - chSysUnlock(); - while(!(i2cp->id_i2c->SR1 & I2C_SR1_RXNE)) - ; - *rxbuf = i2cp->id_i2c->DR; - rxbuf++; - i2cp->rxbytes--; - while (i2cp->id_i2c->CR1 & I2C_CR1_STOP) - ; - i2cp->id_i2c->CR1 |= I2C_CR1_ACK; - } - } -} -#endif /* I2C_SUPPORTS_CALLBACKS */ - -#undef rxBuffp -#undef txBuffp - -#endif /* HAL_USE_I2C */ diff --git a/os/hal/platforms/STM32/I2Cv1/i2c_lld.h b/os/hal/platforms/STM32/I2Cv1/i2c_lld.h deleted file mode 100644 index 29a9cc715..000000000 --- a/os/hal/platforms/STM32/I2Cv1/i2c_lld.h +++ /dev/null @@ -1,322 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010, - 2011 Giovanni Di Sirio. - - This file is part of ChibiOS/RT. - - ChibiOS/RT is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - ChibiOS/RT is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ -/* - Concepts and parts of this file have been contributed by Uladzimir Pylinsky - aka barthess. - */ - -/** - * @file STM32/i2c_lld.h - * @brief STM32 I2C subsystem low level driver header. - * @addtogroup I2C - * @{ - */ - -#ifndef _I2C_LLD_H_ -#define _I2C_LLD_H_ - -#if HAL_USE_I2C || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @name Configuration options - * @{ - */ -/** - * @brief Switch between callback based and synchronouse driver. - * @note The default is synchronouse. - */ -#if !defined(I2C_SUPPORTS_CALLBACKS) || defined(__DOXYGEN__) -#define I2C_SUPPORTS_CALLBACKS TRUE -#endif - -/** - * @brief I2C1 driver synchronization choice between GPT and polling. - * @note The default is polling wait. - */ -#if !defined(STM32_I2C_I2C1_USE_GPT_TIM) || \ - !defined(STM32_I2C_I2C1_USE_POLLING_WAIT) || \ - defined(__DOXYGEN__) -#define STM32_I2C_I2C1_USE_POLLING_WAIT TRUE -#endif - -/** - * @brief I2C2 driver synchronization choice between GPT and polling. - * @note The default is polling wait. - */ -#if !defined(STM32_I2C_I2C2_USE_GPT_TIM) || \ - !defined(STM32_I2C_I2C2_USE_POLLING_WAIT) || \ - defined(__DOXYGEN__) -#define STM32_I2C_I2C2_USE_POLLING_WAIT TRUE -#endif - -/** - * @brief I2C1 driver enable switch. - * @details If set to @p TRUE the support for I2C1 is included. - * @note The default is @p TRUE. - */ -#if !defined(STM32_I2C_USE_I2C1) || defined(__DOXYGEN__) -#define STM32_I2C_USE_I2C1 TRUE -#endif - -/** - * @brief I2C2 driver enable switch. - * @details If set to @p TRUE the support for I2C2 is included. - * @note The default is @p TRUE. - */ -#if !defined(STM32_I2C_USE_I2C2) || defined(__DOXYGEN__) -#define STM32_I2C_USE_I2C2 TRUE -#endif - -/** - * @brief I2C1 interrupt priority level setting. - * @note @p BASEPRI_KERNEL >= @p STM32_I2C_I2C1_IRQ_PRIORITY > @p PRIORITY_PENDSV. - */ -#if !defined(STM32_I2C_I2C1_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define STM32_I2C_I2C1_IRQ_PRIORITY 0xA0 -#endif - -/** - * @brief I2C2 interrupt priority level setting. - * @note @p BASEPRI_KERNEL >= @p STM32_I2C_I2C2_IRQ_PRIORITY > @p PRIORITY_PENDSV. - */ -#if !defined(STM32_I2C_I2C2_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define STM32_I2C_I2C2_IRQ_PRIORITY 0xA0 -#endif -/** @} */ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -/** @brief EV5 */ -#define I2C_EV5_MASTER_MODE_SELECT ((uint32_t)(((I2C_SR2_MSL|I2C_SR2_BUSY)<< 16)|I2C_SR1_SB)) /* BUSY, MSL and SB flag */ -/** @brief EV6 */ -#define I2C_EV6_MASTER_TRA_MODE_SELECTED ((uint32_t)(((I2C_SR2_MSL|I2C_SR2_BUSY|I2C_SR2_TRA)<< 16)|I2C_SR1_ADDR|I2C_SR1_TXE)) /* BUSY, MSL, ADDR, TXE and TRA flags */ -#define I2C_EV6_MASTER_REC_MODE_SELECTED ((uint32_t)(((I2C_SR2_MSL|I2C_SR2_BUSY)<< 16)|I2C_SR1_ADDR)) /* BUSY, MSL and ADDR flags */ -/** @brief EV7 */ -#define I2C_EV7_MASTER_REC_BYTE_RECEIVED ((uint32_t)(((I2C_SR2_MSL|I2C_SR2_BUSY)<< 16)|I2C_SR1_RXNE)) /* BUSY, MSL and RXNE flags */ -#define I2C_EV7_MASTER_REC_BYTE_QUEUED ((uint32_t)(((I2C_SR2_MSL|I2C_SR2_BUSY)<< 16)|I2C_SR1_BTF|I2C_SR1_RXNE)) /* BUSY, MSL, RXNE and BTF flags*/ -/** @brief EV8 */ -#define I2C_EV8_MASTER_BYTE_TRANSMITTING ((uint32_t)(((I2C_SR2_MSL|I2C_SR2_BUSY|I2C_SR2_TRA)<< 16)|I2C_SR1_TXE)) /* TRA, BUSY, MSL, TXE flags */ -/** @brief EV8_2 */ -#define I2C_EV8_2_MASTER_BYTE_TRANSMITTED ((uint32_t)(((I2C_SR2_MSL|I2C_SR2_BUSY|I2C_SR2_TRA)<< 16)|I2C_SR1_BTF|I2C_SR1_TXE)) /* TRA, BUSY, MSL, TXE and BTF flags */ -/** @brief EV9 */ -#define I2C_EV9_MASTER_ADDR_10BIT ((uint32_t)(((I2C_SR2_MSL|I2C_SR2_BUSY)<< 16)|I2C_SR1_ADD10)) /* BUSY, MSL and ADD10 flags */ -#define I2C_EV_MASK 0x00FFFFFF /* First byte zeroed because there is no need of PEC register part from SR2 */ - -#define I2C_FLG_1BTR 0x01 /* Single byte to be received and processed */ -#define I2C_FLG_2BTR 0x02 /* Two bytes to be received and processed */ -#define I2C_FLG_3BTR 0x04 /* Last three received bytes to be processed */ -#define I2C_FLG_MASTER_RECEIVER 0x10 -#define I2C_FLG_HEADER_SENT 0x80 -#define I2C_FLG_TIMER_ARMED 0x40 /* Used to check locks on the bus */ - -#define EV6_SUBEV_MASK (I2C_FLG_1BTR|I2C_FLG_2BTR|I2C_FLG_MASTER_RECEIVER) -#define EV7_SUBEV_MASK (I2C_FLG_2BTR|I2C_FLG_3BTR|I2C_FLG_MASTER_RECEIVER) - -#define I2C_EV6_1_MASTER_REC_2BTR_MODE_SELECTED (I2C_FLG_2BTR|I2C_FLG_MASTER_RECEIVER) -#define I2C_EV6_3_MASTER_REC_1BTR_MODE_SELECTED (I2C_FLG_1BTR|I2C_FLG_MASTER_RECEIVER) -#define I2C_EV7_2_MASTER_REC_3BYTES_TO_PROCESS (I2C_FLG_3BTR|I2C_FLG_MASTER_RECEIVER) -#define I2C_EV7_3_MASTER_REC_2BYTES_TO_PROCESS (I2C_FLG_2BTR|I2C_FLG_MASTER_RECEIVER) - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @brief I2C Driver condition flags type. - */ -typedef uint32_t i2cflags_t; - -typedef enum { - OPMODE_I2C = 1, - OPMODE_SMBUS_DEVICE = 2, - OPMODE_SMBUS_HOST = 3, -} i2copmode_t; - -typedef enum { - STD_DUTY_CYCLE = 1, - FAST_DUTY_CYCLE_2 = 2, - FAST_DUTY_CYCLE_16_9 = 3, -} i2cdutycycle_t; - -/** - * @brief Driver configuration structure. - */ -typedef struct { - i2copmode_t op_mode; /**< @brief Specifies the I2C mode.*/ - uint32_t clock_speed; /**< @brief Specifies the clock frequency. Must be set to a value lower than 400kHz */ - i2cdutycycle_t duty_cycle; /**< @brief Specifies the I2C fast mode duty cycle */ - uint8_t own_addr_7; /**< @brief Specifies the first device 7-bit own address. */ - uint16_t own_addr_10; /**< @brief Specifies the second part of device own address in 10-bit mode. Set to NULL if not used. */ - uint8_t nbit_own_addr; /**< @brief Specifies if 7-bit or 10-bit address is acknowledged */ -} I2CConfig; - - -/** - * @brief Type of a structure representing an I2C driver. - */ -typedef struct I2CDriver I2CDriver; - -/** - * @brief Type of a structure representing an I2C slave config. - */ -typedef struct I2CSlaveConfig I2CSlaveConfig; - -/** - * @brief Structure representing an I2C driver. - */ -struct I2CDriver{ - /** - * @brief Driver state. - */ - i2cstate_t id_state; - -#if I2C_USE_WAIT - /** - * @brief Thread waiting for I/O completion. - */ - Thread *id_thread; -#endif /* I2C_USE_WAIT */ -#if I2C_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__) -#if CH_USE_MUTEXES || defined(__DOXYGEN__) - /** - * @brief Mutex protecting the bus. - */ - Mutex id_mutex; -#elif CH_USE_SEMAPHORES - Semaphore id_semaphore; -#endif -#endif /* I2C_USE_MUTUAL_EXCLUSION */ - - /** - * @brief Current configuration data. - */ - const I2CConfig *id_config; - /** - * @brief Current slave configuration data. - */ - const I2CSlaveConfig *id_slave_config; - - __IO size_t txbytes; /*!< @brief Number of bytes to be transmitted. */ - __IO size_t rxbytes; /*!< @brief Number of bytes to be received. */ - uint8_t *rxbuf; /*!< @brief Pointer to receive buffer. */ - uint8_t *txbuf; /*!< @brief Pointer to transmit buffer.*/ - uint8_t *rxbuff_p; /*!< @brief Pointer to the current byte in slave rx buffer. */ - uint8_t *txbuff_p; /*!< @brief Pointer to the current byte in slave tx buffer. */ - - __IO i2cflags_t errors; /*!< @brief Error flags.*/ - __IO i2cflags_t flags; /*!< @brief State flags.*/ - - uint16_t slave_addr; /*!< @brief Current slave address. */ - uint8_t slave_addr1;/*!< @brief 7-bit address of the slave with r\w bit.*/ - uint8_t slave_addr2;/*!< @brief Uses in 10-bit address mode. */ - -#if CH_USE_EVENTS - EventSource sevent; /*!< @brief Status Change @p EventSource.*/ -#endif - - /*********** End of the mandatory fields. **********************************/ - - /** - * @brief Pointer to the I2Cx registers block. - */ - I2C_TypeDef *id_i2c; - -#if !(STM32_I2C_I2C1_USE_POLLING_WAIT) - /* TODO: capability to switch this GPT fields off */ - /** - * @brief Timer for waiting STOP condition on the bus. - * @details This is workaround for STM32 buggy I2C cell. - */ - GPTDriver *timer; - - /** - * @brief Config for workaround timer. - */ - const GPTConfig *timer_cfg; -#endif /* !(STM32_I2C_I2C1_USE_POLLING_WAIT) */ -}; - - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -#define i2c_lld_bus_is_busy(i2cp) \ - (i2cp->id_i2c->SR2 & I2C_SR2_BUSY) - - -/* Wait until BUSY flag is reset: a STOP has been generated on the bus - * signaling the end of transmission. Normally this wait function - * does not block thread, only if slave not response it does. - */ -#define i2c_lld_wait_bus_free(i2cp) { \ - uint32_t tmo = 0xfffff; \ - while((i2cp->id_i2c->SR2 & I2C_SR2_BUSY) && tmo--) \ - ; \ -} - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -/** @cond never*/ -#if STM32_I2C_USE_I2C1 -extern I2CDriver I2CD1; -#endif - -#if STM32_I2C_USE_I2C2 -extern I2CDriver I2CD2; -#endif - -#ifdef __cplusplus -extern "C" { -#endif - -void i2c_lld_init(void); -void i2c_lld_reset(I2CDriver *i2cp); -void i2c_lld_set_clock(I2CDriver *i2cp); -void i2c_lld_set_opmode(I2CDriver *i2cp); -void i2c_lld_set_own_address(I2CDriver *i2cp); -void i2c_lld_start(I2CDriver *i2cp); -void i2c_lld_stop(I2CDriver *i2cp); -void i2c_lld_master_transmit(I2CDriver *i2cp, uint16_t slave_addr, - uint8_t *txbuf, size_t txbytes, uint8_t *rxbuf, size_t rxbytes); -void i2c_lld_master_receive(I2CDriver *i2cp, uint16_t slave_addr, - uint8_t *rxbuf, size_t rxbytes); -void i2c_lld_master_transceive(I2CDriver *i2cp); - -#ifdef __cplusplus -} -#endif -/** @endcond*/ - -#endif /* CH_HAL_USE_I2C */ - -#endif /* _I2C_LLD_H_ */ |