diff options
Diffstat (limited to 'os/hal/platforms/SPC5xx/eMIOS_v1/spc5_emios.h')
| -rw-r--r-- | os/hal/platforms/SPC5xx/eMIOS_v1/spc5_emios.h | 169 |
1 files changed, 0 insertions, 169 deletions
diff --git a/os/hal/platforms/SPC5xx/eMIOS_v1/spc5_emios.h b/os/hal/platforms/SPC5xx/eMIOS_v1/spc5_emios.h deleted file mode 100644 index 946db2400..000000000 --- a/os/hal/platforms/SPC5xx/eMIOS_v1/spc5_emios.h +++ /dev/null @@ -1,169 +0,0 @@ -/*
- SPC5 HAL - Copyright (C) 2013 STMicroelectronics
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file eMIOS_v1/spc5_emios.h
- * @brief SPC5xx low level ICU - PWM driver common header.
- *
- * @addtogroup ICU - PWM
- * @{
- */
-
-#ifndef _SPC5_EMIOS_H_
-#define _SPC5_EMIOS_H_
-
-#if HAL_USE_ICU || defined(__DOXYGEN__)
-
-/*===========================================================================*/
-/* Driver constants. */
-/*===========================================================================*/
-
-#define EMIOSMCR_MDIS (1U << 30U)
-#define EMIOSMCR_FRZ (1U << 29U)
-#define EMIOSMCR_GTBE (1U << 28U)
-#define EMIOSMCR_GPREN (1U << 26U)
-#define EMIOSMCR_GPRE(n) ((n) << 8U)
-
-#define EMIOSC_FREN (1U << 31U)
-#define EMIOSC_UCPRE(n) ((n) << 26U)
-#define EMIOSC_UCPREN (1U << 25U)
-#define EMIOSC_DMA (1U << 24U)
-#define EMIOSC_IF(n) ((n) << 19U)
-#define EMIOSC_FCK (1U << 18U)
-#define EMIOSC_FEN (1U << 17U)
-#define EMIOSC_FORCMA (1U << 13U)
-#define EMIOSC_FORCMB (1U << 12U)
-#define EMIOSC_BSL(n) ((n) << 9U)
-#define EMIOSC_EDSEL (1U << 8U)
-#define EMIOSC_EDPOL (1U << 7U)
-#define EMIOSC_MODE(n) ((n) << 0)
-
-#define EMIOS_BSL_COUNTER_BUS_A 0
-#define EMIOS_BSL_COUNTER_BUS_2 1U
-#define EMIOS_BSL_INTERNAL_COUNTER 3U
-
-#define EMIOS_CCR_MODE_GPIO_IN 0
-#define EMIOS_CCR_MODE_GPIO_OUT 1U
-#define EMIOS_CCR_MODE_SAIC 2U
-#define EMIOS_CCR_MODE_SAOC 3U
-#define EMIOS_CCR_MODE_IPWM 4U
-#define EMIOS_CCR_MODE_IPM 5U
-#define EMIOS_CCR_MODE_DAOC_B_MATCH 6U
-#define EMIOS_CCR_MODE_DAOC_BOTH_MATCH 7U
-#define EMIOS_CCR_MODE_MC_CMS 16U
-#define EMIOS_CCR_MODE_MC_CME 17U
-#define EMIOS_CCR_MODE_MC_UP_DOWN 18U
-#define EMIOS_CCR_MODE_OPWMT 38U
-#define EMIOS_CCR_MODE_MCB_UP 80U
-#define EMIOS_CCR_MODE_MCB_UP_DOWN 84U
-#define EMIOS_CCR_MODE_OPWFMB 88U
-#define EMIOS_CCR_MODE_OPWMCB_TE 92U
-#define EMIOS_CCR_MODE_OPWMCB_LE 93U
-#define EMIOS_CCR_MODE_OPWMB 96U
-
-#define EMIOSS_OVR (1U << 31U)
-#define EMIOSS_OVRC (1U << 31U)
-#define EMIOSS_OVFL (1U << 15U)
-#define EMIOSS_OVFLC (1U << 15U)
-#define EMIOSS_FLAG (1U << 0)
-#define EMIOSS_FLAGC (1U << 0)
-
-/*===========================================================================*/
-/* Driver pre-compile time settings. */
-/*===========================================================================*/
-
-#if SPC5_HAS_EMIOS0
-/**
- * @brief eMIOS0 peripheral configuration when started.
- * @note The default configuration is 1 (always run) in run mode and
- * 2 (only halt) in low power mode. The defaults of the run modes
- * are defined in @p hal_lld.h.
- */
-#if !defined(SPC5_EMIOS0_START_PCTL) || defined(__DOXYGEN__)
-#define SPC5_EMIOS0_START_PCTL (SPC5_ME_PCTL_RUN(1) | \
- SPC5_ME_PCTL_LP(2))
-#endif
-
-/**
- * @brief eMIOS0 peripheral configuration when stopped.
- * @note The default configuration is 0 (never run) in run mode and
- * 0 (never run) in low power mode. The defaults of the run modes
- * are defined in @p hal_lld.h.
- */
-#if !defined(SPC5_EMIOS0_STOP_PCTL) || defined(__DOXYGEN__)
-#define SPC5_EMIOS0_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \
- SPC5_ME_PCTL_LP(0))
-#endif
-#endif
-
-#if SPC5_HAS_EMIOS1
-/**
- * @brief eMIOS1 peripheral configuration when started.
- * @note The default configuration is 1 (always run) in run mode and
- * 2 (only halt) in low power mode. The defaults of the run modes
- * are defined in @p hal_lld.h.
- */
-#if !defined(SPC5_EMIOS1_START_PCTL) || defined(__DOXYGEN__)
-#define SPC5_EMIOS1_START_PCTL (SPC5_ME_PCTL_RUN(1) | \
- SPC5_ME_PCTL_LP(2))
-#endif
-
-/**
- * @brief eMIOS1 peripheral configuration when stopped.
- * @note The default configuration is 0 (never run) in run mode and
- * 0 (never run) in low power mode. The defaults of the run modes
- * are defined in @p hal_lld.h.
- */
-#if !defined(SPC5_EMIOS1_STOP_PCTL) || defined(__DOXYGEN__)
-#define SPC5_EMIOS1_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \
- SPC5_ME_PCTL_LP(0))
-#endif
-#endif
-
-/*===========================================================================*/
-/* Derived constants and error checks. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver data structures and types. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver macros. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* External declarations. */
-/*===========================================================================*/
-
-void reset_emios0_active_channels(void);
-void reset_emios1_active_channels(void);
-uint32_t get_emios0_active_channels(void);
-uint32_t get_emios1_active_channels(void);
-void increase_emios0_active_channels(void);
-void decrease_emios0_active_channels(void);
-void increase_emios1_active_channels(void);
-void decrease_emios1_active_channels(void);
-void active_emios0_clock(ICUDriver *icup, PWMDriver *pwmp);
-void active_emios1_clock(ICUDriver *icup, PWMDriver *pwmp);
-void deactive_emios0_clock(ICUDriver *icup, PWMDriver *pwmp);
-void deactive_emios1_clock(ICUDriver *icup, PWMDriver *pwmp);
-
-#endif /* HAL_USE_ICU */
-
-#endif /* _SPC5_EMIOS_H_ */
-
-/** @} */
|