diff options
Diffstat (limited to 'os/hal/platforms/SPC5xx/ESCI_v1/serial_lld.h')
| -rw-r--r-- | os/hal/platforms/SPC5xx/ESCI_v1/serial_lld.h | 170 |
1 files changed, 0 insertions, 170 deletions
diff --git a/os/hal/platforms/SPC5xx/ESCI_v1/serial_lld.h b/os/hal/platforms/SPC5xx/ESCI_v1/serial_lld.h deleted file mode 100644 index b8b29fb99..000000000 --- a/os/hal/platforms/SPC5xx/ESCI_v1/serial_lld.h +++ /dev/null @@ -1,170 +0,0 @@ -/*
- SPC5 HAL - Copyright (C) 2013 STMicroelectronics
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file SPC5xx/ESCI_v1/serial_lld.c
- * @brief SPC5xx low level serial driver header.
- *
- * @addtogroup SERIAL
- * @{
- */
-
-#ifndef _SERIAL_LLD_H_
-#define _SERIAL_LLD_H_
-
-#if HAL_USE_SERIAL || defined(__DOXYGEN__)
-
-/*===========================================================================*/
-/* Driver constants. */
-/*===========================================================================*/
-
-/**
- * @name Serial port modes
- * @{
- */
-#define SD_MODE_PARITY_MASK 0x03 /**< @brief Parity field mask. */
-#define SD_MODE_PARITY_NONE 0x00 /**< @brief No parity. */
-#define SD_MODE_PARITY_EVEN 0x01 /**< @brief Even parity. */
-#define SD_MODE_PARITY_ODD 0x02 /**< @brief Odd parity. */
-
-#define SD_MODE_NORMAL 0x00 /**< @brief Normal operations. */
-#define SD_MODE_LOOPBACK 0x80 /**< @brief Internal loopback. */
-/** @} */
-
-/*===========================================================================*/
-/* Driver pre-compile time settings. */
-/*===========================================================================*/
-
-/**
- * @brief eSCI-A driver enable switch.
- * @details If set to @p TRUE the support for eSCI-A is included.
- * @note The default is @p TRUE.
- */
-#if !defined(SPC5_USE_ESCIA) || defined(__DOXYGEN__)
-#define SPC5_USE_ESCIA TRUE
-#endif
-
-/**
- * @brief eSCI-B driver enable switch.
- * @details If set to @p TRUE the support for eSCI-B is included.
- * @note The default is @p TRUE.
- */
-#if !defined(SPC5_USE_ESCIB) || defined(__DOXYGEN__)
-#define SPC5_USE_ESCIB TRUE
-#endif
-
-/**
- * @brief eSCI-A interrupt priority level setting.
- */
-#if !defined(SPC_ESCIA_PRIORITY) || defined(__DOXYGEN__)
-#define SPC5_ESCIA_PRIORITY 8
-#endif
-
-/**
- * @brief eSCI-B interrupt priority level setting.
- */
-#if !defined(SPC_ESCIB_PRIORITY) || defined(__DOXYGEN__)
-#define SPC5_ESCIB_PRIORITY 8
-#endif
-
-/*===========================================================================*/
-/* Derived constants and error checks. */
-/*===========================================================================*/
-
-#if SPC5_USE_ESCIA && !SPC5_HAS_ESCIA
-#error "eSCI-A not present in the selected device"
-#endif
-
-#if SPC5_USE_ESCIB && !SPC5_HAS_ESCIB
-#error "eSCI-B not present in the selected device"
-#endif
-
-#if !SPC5_USE_ESCIA && !SPC5_USE_ESCIB
-#error "SERIAL driver activated but no eSCI peripheral assigned"
-#endif
-
-/*===========================================================================*/
-/* Driver data structures and types. */
-/*===========================================================================*/
-
-/**
- * @brief Generic Serial Driver configuration structure.
- * @details An instance of this structure must be passed to @p sdStart()
- * in order to configure and start a serial driver operations.
- * @note This structure content is architecture dependent, each driver
- * implementation defines its own version and the custom static
- * initializers.
- */
-typedef struct {
- /**
- * @brief Bit rate.
- */
- uint32_t sc_speed;
- /**
- * @brief Mode flags.
- */
- uint8_t sc_mode;
-} SerialConfig;
-
-/**
- * @brief @p SerialDriver specific data.
- */
-#define _serial_driver_data \
- _base_asynchronous_channel_data \
- /* Driver state.*/ \
- sdstate_t state; \
- /* Input queue.*/ \
- InputQueue iqueue; \
- /* Output queue.*/ \
- OutputQueue oqueue; \
- /* Input circular buffer.*/ \
- uint8_t ib[SERIAL_BUFFERS_SIZE]; \
- /* Output circular buffer.*/ \
- uint8_t ob[SERIAL_BUFFERS_SIZE]; \
- /* End of the mandatory fields.*/ \
- /* Pointer to the volatile eSCI registers block.*/ \
- volatile struct ESCI_tag *escip;
-
-/*===========================================================================*/
-/* Driver macros. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* External declarations. */
-/*===========================================================================*/
-
-#if SPC5_USE_ESCIA && !defined(__DOXYGEN__)
-extern SerialDriver SD1;
-#endif
-#if SPC5_USE_ESCIB && !defined(__DOXYGEN__)
-extern SerialDriver SD2;
-#endif
-
-#ifdef __cplusplus
-extern "C" {
-#endif
- void sd_lld_init(void);
- void sd_lld_start(SerialDriver *sdp, const SerialConfig *config);
- void sd_lld_stop(SerialDriver *sdp);
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* HAL_USE_SERIAL */
-
-#endif /* _SERIAL_LLD_H_ */
-
-/** @} */
|