diff options
Diffstat (limited to 'os/hal/platforms/SAM4L/sam4l_patch_asf.h')
| -rw-r--r-- | os/hal/platforms/SAM4L/sam4l_patch_asf.h | 101 |
1 files changed, 0 insertions, 101 deletions
diff --git a/os/hal/platforms/SAM4L/sam4l_patch_asf.h b/os/hal/platforms/SAM4L/sam4l_patch_asf.h deleted file mode 100644 index 4e421f8d0..000000000 --- a/os/hal/platforms/SAM4L/sam4l_patch_asf.h +++ /dev/null @@ -1,101 +0,0 @@ -/**
- * \file
- *
- * \brief ASF Patch Header file definitions for SAM4L.
- *
- * Copyright (c) 2012 Atmel Corporation. All rights reserved.
- *
- * \asf_license_start
- *
- * \page License
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- *
- * 3. The name of Atmel may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * 4. This software may only be redistributed and used in connection with an
- * Atmel microcontroller product.
- *
- * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
- * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- * \asf_license_stop
- *
- */
-
-#ifndef SAM4L_PATCH_ASF_H_INCLUDED
-#define SAM4L_PATCH_ASF_H_INCLUDED
-
-// These defines are used for sam/drivers/flashcalw implementation.
-#define FLASHCALW_FCMD_CMD_HSEN (0x10u << 0)
-#define FLASHCALW_FCMD_CMD_HSDIS (0x11u << 0)
-
-// These defines are used to keep compatibility with existing
-// sam/drivers/usart implementation from SAM3/4 products with SAM4L product.
-#define US_MR_USART_MODE_HW_HANDSHAKING US_MR_USART_MODE_HARDWARE
-#define US_MR_USART_MODE_IS07816_T_0 US_MR_USART_MODE_ISO7816_T0
-#define US_MR_USART_MODE_IS07816_T_1 US_MR_USART_MODE_ISO7816_T1
-#define US_MR_NBSTOP_2_BIT US_MR_NBSTOP_2
-#define US_MR_NBSTOP_1_BIT US_MR_NBSTOP_1
-#define US_MR_CHRL_8_BIT US_MR_CHRL_8
-#define US_MR_PAR_NO US_MR_PAR_NONE
-#define US_MR_PAR_MULTIDROP US_MR_PAR_MULTI
-#define US_IF US_IFR
-#define US_WPSR_WPVS US_WPSR_WPV_1
-
-#if (!defined SCIF_RCOSC_FREQUENCY)
-# define SCIF_RCOSC_FREQUENCY 115200
-#endif
-
-// These defines for homogeneity with other SAM header files.
-#define CHIP_FREQ_FWS_0 (18000000UL) /**< \brief Maximum operating frequency when FWS is 0 */
-#define CHIP_FREQ_FWS_1 (36000000UL) /**< \brief Maximum operating frequency when FWS is 1 */
-// WARNING NOTE: these are preliminary values.
-#define CHIP_FREQ_FLASH_HSEN_FWS_0 (18000000UL) /**< \brief Maximum operating frequency when FWS is 0 and the FLASH HS mode is enabled */
-#define CHIP_FREQ_FLASH_HSEN_FWS_1 (36000000UL) /**< \brief Maximum operating frequency when FWS is 1 and the FLASH HS mode is enabled */
-
-// Size of HRAMC1 with 32-bit access
-#undef HRAMC1_SIZE
-#define HRAMC1_SIZE (0x800UL)
-
-// USBC related offsets
-#define USBC_UHINT_P0INT_Pos 8
-#define USBC_UHINTE_P0INTE_Pos 8
-#define USBC_UPCFG0_PBK_Pos 2
-#define USBC_UPCFG0_PBK_Msk (0x1u << USBC_UPCFG0_PBK_Pos)
-
-// These defines are used to keep compatibility with existing
-// sam/drivers/tc implementation from SAM3/4 products with SAM4L product.
-#define TC_SMMR TC_SMC
-#define TC_CMR_LDRA_RISING TC_CMR_LDRA_POS_EDGE_TIOA
-#define TC_CMR_LDRB_FALLING TC_CMR_LDRB_NEG_EDGE_TIOA
-#define TC_CMR_ETRGEDG_FALLING TC_CMR_ETRGEDG_NEG_EDGE
-
-// These defines are used to keep compatibility with existing
-// sam/drivers/spi implementation from SAM3/4 products with SAM4L product.
-#define SPI_CSR_BITS_8_BIT SPI_CSR_BITS_8_BPT
-
-#define SPI_WPSR_WPVS_Pos SPI_WPSR_SPIWPVS_Pos
-#define SPI_WPSR_WPVS_Msk SPI_WPSR_SPIWPVS_Msk
-#define SPI_WPSR_WPVSRC_Pos SPI_WPSR_SPIWPVSRC_Pos
-#define SPI_WPSR_WPVSRC_Msk SPI_WPSR_SPIWPVSRC_Msk
-
-#endif // SAM4L_PATCH_ASF_H_INCLUDED
|