1 files changed, 0 insertions, 103 deletions
diff --git a/os/hal/platforms/MSP430X/platform.dox b/os/hal/platforms/MSP430X/platform.dox
deleted file mode 100644
index 528e80570..000000000
--- a/os/hal/platforms/MSP430X/platform.dox
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
-    ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
-                 2011,2012 Giovanni Di Sirio.
-
-    This file is part of ChibiOS/RT.
-
-    ChibiOS/RT is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 3 of the License, or
-    (at your option) any later version.
-
-    ChibiOS/RT is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/**
- * @defgroup MSP430_DRIVERS MSP430 Drivers
- * @details This section describes all the supported drivers on the MSP430
- *          platform and the implementation details of the single drivers.
- *
- * @ingroup platforms
- */
-
-/**
- * @defgroup MSP430_HAL MSP430 Initialization Support
- * @details The MSP430 HAL support is responsible for system initialization.
- *
- * @section msp430_hal_1 Supported HW resources
- * - DCOCTL.
- * - BCSCTL1.
- * - BCSCTL2.
- * .
- * @section msp430_hal_2 MSP430 HAL driver implementation features
- * - Clock source selection.
- * .
- * @ingroup MSP430_DRIVERS
- */
-
-/**
- * @defgroup MSP430_PAL MSP430 PAL Support
- * @details The MSP430 PAL driver uses the PORT peripherals.
- *
- * @section msp430_pal_1 Supported HW resources
- * - PORT1 (where present).
- * - PORT2 (where present).
- * - PORT3 (where present).
- * - PORT4 (where present).
- * - PORT5 (where present).
- * - PORT6 (where present).
- * - PORT7 (where present).
- * - PORT8 (where present).
- * - PORT9 (where present).
- * - PORT10 (where present).
- * - PORT11 (where present).
- * - PORT12 (PORT_J) (where present).
- * .
- * @section msp430_pal_2 MSP430 PAL driver implementation features
- * The PAL driver implementation fully supports the following hardware
- * capabilities:
- * - 8 bits wide ports.
- * - Atomic set/reset/toggle functions because special MSP430 instruction set.
- * - Output latched regardless of the pad setting.
- * - Direct read of input pads regardless of the pad setting.
- * .
- * @section msp430_pal_3 Supported PAL setup modes
- * The MSP430 PAL driver supports the following I/O modes:
- * - @p PAL_MODE_RESET.
- * - @p PAL_MODE_UNCONNECTED.
- * - @p PAL_MODE_INPUT.
- * - @p PAL_MODE_OUTPUT_PUSHPULL.
- * .
- * Any attempt to setup an invalid mode is ignored.
- *
- * @section msp430_pal_4 Suboptimal behavior
- * The MSP430 PORT is less than optimal in several areas, the limitations
- * should be taken in account while using the PAL driver:
- * - Bus/group writes is not atomic.
- * - Pad/group mode setup is not atomic.
- * .
- * @ingroup MSP430_DRIVERS
- */
-
-/**
- * @defgroup MSP430_SERIAL MSP430 Serial Support
- * @details The MSP430 Serial driver uses the USART peripherals in a
- *          buffered, interrupt driven, implementation.
- *
- * @section msp430_serial_1 Supported HW resources
- * The serial driver can support any of the following hardware resources:
- * - USART0.
- * - USART1.
- * .
- * @section msp430_serial_2 MSP430 Serial driver implementation features
- * - Each USART can be independently enabled and programmed.
- * - Fully interrupt driven.
- * .
- * @ingroup MSP430_DRIVERS
- */