diff options
Diffstat (limited to 'os/hal/platforms/LPC122x/spi_lld.h')
| -rw-r--r-- | os/hal/platforms/LPC122x/spi_lld.h | 281 |
1 files changed, 281 insertions, 0 deletions
diff --git a/os/hal/platforms/LPC122x/spi_lld.h b/os/hal/platforms/LPC122x/spi_lld.h new file mode 100644 index 000000000..0cb48f89f --- /dev/null +++ b/os/hal/platforms/LPC122x/spi_lld.h @@ -0,0 +1,281 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file LPC122x/spi_lld.h
+ * @brief LPC122x low level SPI driver header.
+ *
+ * @addtogroup SPI
+ * @{
+ */
+
+#ifndef _SPI_LLD_H_
+#define _SPI_LLD_H_
+
+#if HAL_USE_SPI || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/**
+ * @brief Hardware FIFO depth.
+ */
+#define LPC122x_SSP_FIFO_DEPTH 8
+
+#define CR0_DSSMASK 0x0F
+#define CR0_DSS4BIT 3
+#define CR0_DSS5BIT 4
+#define CR0_DSS6BIT 5
+#define CR0_DSS7BIT 6
+#define CR0_DSS8BIT 7
+#define CR0_DSS9BIT 8
+#define CR0_DSS10BIT 9
+#define CR0_DSS11BIT 0xA
+#define CR0_DSS12BIT 0xB
+#define CR0_DSS13BIT 0xC
+#define CR0_DSS14BIT 0xD
+#define CR0_DSS15BIT 0xE
+#define CR0_DSS16BIT 0xF
+#define CR0_FRFSPI 0
+#define CR0_FRFSSI 0x10
+#define CR0_FRFMW 0x20
+#define CR0_CPOL 0x40
+#define CR0_CPHA 0x80
+#define CR0_CLOCKRATE(n) ((n) << 8)
+
+#define CR1_LBM 1
+#define CR1_SSE 2
+#define CR1_MS 4
+#define CR1_SOD 8
+
+#define SR_TFE 1
+#define SR_TNF 2
+#define SR_RNE 4
+#define SR_RFF 8
+#define SR_BSY 16
+
+#define IMSC_ROR 1
+#define IMSC_RT 2
+#define IMSC_RX 4
+#define IMSC_TX 8
+
+#define RIS_ROR 1
+#define RIS_RT 2
+#define RIS_RX 4
+#define RIS_TX 8
+
+#define MIS_ROR 1
+#define MIS_RT 2
+#define MIS_RX 4
+#define MIS_TX 8
+
+#define ICR_ROR 1
+#define ICR_RT 2
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @brief SPI1 driver enable switch.
+ * @details If set to @p TRUE the support for device SSP0 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(LPC122x_SPI_USE_SSP0) || defined(__DOXYGEN__)
+#define LPC122x_SPI_USE_SSP0 TRUE
+#endif
+
+/**
+ * @brief SSP0 PCLK divider.
+ */
+#if !defined(LPC122x_SPI_SSP0CLKDIV) || defined(__DOXYGEN__)
+#define LPC122x_SPI_SSP0CLKDIV 1
+#endif
+
+/**
+ * @brief SPI0 interrupt priority level setting.
+ */
+#if !defined(LPC122x_SPI_SSP0_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define LPC122x_SPI_SSP0_IRQ_PRIORITY 1
+#endif
+
+/**
+ * @brief Overflow error hook.
+ * @details The default action is to stop the system.
+ */
+#if !defined(LPC122x_SPI_SSP_ERROR_HOOK) || defined(__DOXYGEN__)
+#define LPC122x_SPI_SSP_ERROR_HOOK(spip) chSysHalt()
+#endif
+
+/**
+ * @brief SCK0 signal selector.
+ */
+#if !defined(LPC122x_SPI_SCK0_SELECTOR) || defined(__DOXYGEN__)
+#define LPC122x_SPI_SCK0_SELECTOR SCK0_IS_PIO2_11
+#endif
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+#if (LPC122x_SPI_SSP0CLKDIV < 1) || (LPC122x_SPI_SSP0CLKDIV > 255)
+#error "invalid LPC122x_SPI_SSP0CLKDIV setting"
+#endif
+
+#if !LPC122x_SPI_USE_SSP0 && !LPC122x_SPI_USE_SSP1
+#error "SPI driver activated but no SPI peripheral assigned"
+#endif
+
+/**
+ * @brief SSP0 clock.
+ */
+#define LPC122x_SPI_SSP0_PCLK \
+ (LPC122x_MAINCLK / LPC122x_SPI_SSP0CLKDIV)
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief Type of a structure representing an SPI driver.
+ */
+typedef struct SPIDriver SPIDriver;
+
+/**
+ * @brief SPI notification callback type.
+ *
+ * @param[in] spip pointer to the @p SPIDriver object triggering the
+ * callback
+ */
+typedef void (*spicallback_t)(SPIDriver *spip);
+
+/**
+ * @brief Driver configuration structure.
+ */
+typedef struct {
+ /**
+ * @brief Operation complete callback or @p NULL.
+ */
+ spicallback_t end_cb;
+ /* End of the mandatory fields.*/
+ /**
+ * @brief The chip select line port.
+ */
+ ioportid_t ssport;
+ /**
+ * @brief The chip select line pad number.
+ */
+ uint16_t sspad;
+ /**
+ * @brief SSP CR0 initialization data.
+ */
+ uint16_t cr0;
+ /**
+ * @brief SSP CPSR initialization data.
+ */
+ uint32_t cpsr;
+} SPIConfig;
+
+/**
+ * @brief Structure representing a SPI driver.
+ */
+struct SPIDriver {
+ /**
+ * @brief Driver state.
+ */
+ spistate_t state;
+ /**
+ * @brief Current configuration data.
+ */
+ const SPIConfig *config;
+#if SPI_USE_WAIT || defined(__DOXYGEN__)
+ /**
+ * @brief Waiting thread.
+ */
+ Thread *thread;
+#endif /* SPI_USE_WAIT */
+#if SPI_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__)
+#if CH_USE_MUTEXES || defined(__DOXYGEN__)
+ /**
+ * @brief Mutex protecting the bus.
+ */
+ Mutex mutex;
+#elif CH_USE_SEMAPHORES
+ Semaphore semaphore;
+#endif
+#endif /* SPI_USE_MUTUAL_EXCLUSION */
+#if defined(SPI_DRIVER_EXT_FIELDS)
+ SPI_DRIVER_EXT_FIELDS
+#endif
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Pointer to the SSP registers block.
+ */
+ LPC_SSP_Type *ssp;
+ /**
+ * @brief Number of bytes yet to be received.
+ */
+ uint32_t rxcnt;
+ /**
+ * @brief Receive pointer or @p NULL.
+ */
+ void *rxptr;
+ /**
+ * @brief Number of bytes yet to be transmitted.
+ */
+ uint32_t txcnt;
+ /**
+ * @brief Transmit pointer or @p NULL.
+ */
+ const void *txptr;
+};
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#if LPC122x_SPI_USE_SSP0 && !defined(__DOXYGEN__)
+extern SPIDriver SPID1;
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void spi_lld_init(void);
+ void spi_lld_start(SPIDriver *spip);
+ void spi_lld_stop(SPIDriver *spip);
+ void spi_lld_select(SPIDriver *spip);
+ void spi_lld_unselect(SPIDriver *spip);
+ void spi_lld_ignore(SPIDriver *spip, size_t n);
+ void spi_lld_exchange(SPIDriver *spip, size_t n,
+ const void *txbuf, void *rxbuf);
+ void spi_lld_send(SPIDriver *spip, size_t n, const void *txbuf);
+ void spi_lld_receive(SPIDriver *spip, size_t n, void *rxbuf);
+ uint16_t spi_lld_polled_exchange(SPIDriver *spip, uint16_t frame);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_SPI */
+
+#endif /* _SPI_LLD_H_ */
+
+/** @} */
|