diff options
Diffstat (limited to 'os/hal/platforms/LPC11xx/serial_lld.h')
| -rw-r--r-- | os/hal/platforms/LPC11xx/serial_lld.h | 26 |
1 files changed, 12 insertions, 14 deletions
diff --git a/os/hal/platforms/LPC11xx/serial_lld.h b/os/hal/platforms/LPC11xx/serial_lld.h index e14cea679..bb91680cf 100644 --- a/os/hal/platforms/LPC11xx/serial_lld.h +++ b/os/hal/platforms/LPC11xx/serial_lld.h @@ -84,29 +84,29 @@ /*===========================================================================*/
/**
- * @brief UART0 driver enable switch.
+ * @brief UART0 driver enable switch.
* @details If set to @p TRUE the support for UART0 is included.
- * @note The default is @p TRUE .
+ * @note The default is @p TRUE .
*/
#if !defined(USE_LPC11xx_UART0) || defined(__DOXYGEN__)
#define USE_LPC11xx_UART0 TRUE
#endif
/**
- * @brief FIFO preload parameter.
+ * @brief FIFO preload parameter.
* @details Configuration parameter, this values defines how many bytes are
- * preloaded in the HW transmit FIFO for each interrupt, the maximum value is
- * 16 the minimum is 1.
- * @note An high value reduces the number of interrupts generated but can
- * also increase the worst case interrupt response time because the
- * preload loops.
+ * preloaded in the HW transmit FIFO for each interrupt, the maximum
+ * value is 16 the minimum is 1.
+ * @note An high value reduces the number of interrupts generated but can
+ * also increase the worst case interrupt response time because the
+ * preload loops.
*/
#if !defined(LPC11xx_UART_FIFO_PRELOAD) || defined(__DOXYGEN__)
#define LPC11xx_UART_FIFO_PRELOAD 16
#endif
/**
- * @brief UART0 interrupt priority level setting.
+ * @brief UART0 interrupt priority level setting.
*/
#if !defined(LPC11xx_UART0_PRIORITY) || defined(__DOXYGEN__)
#define LPC11xx_UART0_PRIORITY 3
@@ -117,7 +117,7 @@ /*===========================================================================*/
#if (LPC11xx_UART_FIFO_PRELOAD < 1) || (LPC11xx_UART_FIFO_PRELOAD > 16)
-#error "invalid LPC214x_UART_FIFO_PRELOAD setting"
+#error "invalid LPC11xx_UART_FIFO_PRELOAD setting"
#endif
/*===========================================================================*/
@@ -130,7 +130,7 @@ typedef uint32_t sdflags_t;
/**
- * @brief LPC214x Serial Driver configuration structure.
+ * @brief LPC11xx Serial Driver configuration structure.
* @details An instance of this structure must be passed to @p sdStart()
* in order to configure and start a serial driver operations.
*/
@@ -156,8 +156,6 @@ typedef struct { _base_asynchronous_channel_data \
/* Driver state.*/ \
sdstate_t state; \
- /* Current configuration data.*/ \
- const SerialConfig *config; \
/* Input queue.*/ \
InputQueue iqueue; \
/* Output queue.*/ \
@@ -190,7 +188,7 @@ extern SerialDriver SD1; extern "C" {
#endif
void sd_lld_init(void);
- void sd_lld_start(SerialDriver *sdp);
+ void sd_lld_start(SerialDriver *sdp, const SerialConfig *config);
void sd_lld_stop(SerialDriver *sdp);
#ifdef __cplusplus
}
|