diff options
Diffstat (limited to 'os/hal/include/mii.h')
| -rw-r--r-- | os/hal/include/mii.h | 161 |
1 files changed, 0 insertions, 161 deletions
diff --git a/os/hal/include/mii.h b/os/hal/include/mii.h deleted file mode 100644 index 4c9e7a03a..000000000 --- a/os/hal/include/mii.h +++ /dev/null @@ -1,161 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
- 2011,2012,2013 Giovanni Di Sirio.
-
- This file is part of ChibiOS/RT.
-
- ChibiOS/RT is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- ChibiOS/RT is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/*-*
- * @file mii.h
- * @brief MII Driver macros and structures.
- *
- * @addtogroup MII
- * @{
- */
-
-#ifndef _MII_H_
-#define _MII_H_
-
-/*
- * Generic MII registers. Note, not all registers are present on all PHY
- * devices and some extra registers may be present.
- */
-#define MII_BMCR 0x00 /**< Basic mode control register. */
-#define MII_BMSR 0x01 /**< Basic mode status register. */
-#define MII_PHYSID1 0x02 /**< PHYS ID 1. */
-#define MII_PHYSID2 0x03 /**< PHYS ID 2. */
-#define MII_ADVERTISE 0x04 /**< Advertisement control reg. */
-#define MII_LPA 0x05 /**< Link partner ability reg. */
-#define MII_EXPANSION 0x06 /**< Expansion register. */
-#define MII_ANNPTR 0x07 /**< 1000BASE-T control. */
-#define MII_CTRL1000 0x09 /**< 1000BASE-T control. */
-#define MII_STAT1000 0x0a /**< 1000BASE-T status. */
-#define MII_ESTATUS 0x0f /**< Extended Status. */
-#define MII_PHYSTS 0x10 /**< PHY Status register. */
-#define MII_MICR 0x11 /**< MII Interrupt ctrl register. */
-#define MII_DCOUNTER 0x12 /**< Disconnect counter. */
-#define MII_FCSCOUNTER 0x13 /**< False carrier counter. */
-#define MII_NWAYTEST 0x14 /**< N-way auto-neg test reg. */
-#define MII_RERRCOUNTER 0x15 /**< Receive error counter. */
-#define MII_SREVISION 0x16 /**< Silicon revision. */
-#define MII_RESV1 0x17 /**< Reserved. */
-#define MII_LBRERROR 0x18 /**< Lpback, rx, bypass error. */
-#define MII_PHYADDR 0x19 /**< PHY address. */
-#define MII_RESV2 0x1a /**< Reserved. */
-#define MII_TPISTATUS 0x1b /**< TPI status for 10Mbps. */
-#define MII_NCONFIG 0x1c /**< Network interface config. */
-
-/*
- * Basic mode control register.
- */
-#define BMCR_RESV 0x007f /**< Unused. */
-#define BMCR_CTST 0x0080 /**< Collision test. */
-#define BMCR_FULLDPLX 0x0100 /**< Full duplex. */
-#define BMCR_ANRESTART 0x0200 /**< Auto negotiation restart. */
-#define BMCR_ISOLATE 0x0400 /**< Disconnect DP83840 from MII. */
-#define BMCR_PDOWN 0x0800 /**< Powerdown. */
-#define BMCR_ANENABLE 0x1000 /**< Enable auto negotiation. */
-#define BMCR_SPEED100 0x2000 /**< Select 100Mbps. */
-#define BMCR_LOOPBACK 0x4000 /**< TXD loopback bit. */
-#define BMCR_RESET 0x8000 /**< Reset. */
-
-/*
- * Basic mode status register.
- */
-#define BMSR_ERCAP 0x0001 /**< Ext-reg capability. */
-#define BMSR_JCD 0x0002 /**< Jabber detected. */
-#define BMSR_LSTATUS 0x0004 /**< Link status. */
-#define BMSR_ANEGCAPABLE 0x0008 /**< Able to do auto-negotiation. */
-#define BMSR_RFAULT 0x0010 /**< Remote fault detected. */
-#define BMSR_ANEGCOMPLETE 0x0020 /**< Auto-negotiation complete. */
-#define BMSR_MFPRESUPPCAP 0x0040 /**< Able to suppress preamble. */
-#define BMSR_RESV 0x0780 /**< Unused. */
-#define BMSR_10HALF 0x0800 /**< Can do 10mbps, half-duplex. */
-#define BMSR_10FULL 0x1000 /**< Can do 10mbps, full-duplex. */
-#define BMSR_100HALF 0x2000 /**< Can do 100mbps, half-duplex. */
-#define BMSR_100FULL 0x4000 /**< Can do 100mbps, full-duplex. */
-#define BMSR_100BASE4 0x8000 /**< Can do 100mbps, 4k packets. */
-
-/*
- * Advertisement control register.
- */
-#define ADVERTISE_SLCT 0x001f /**< Selector bits. */
-#define ADVERTISE_CSMA 0x0001 /**< Only selector supported. */
-#define ADVERTISE_10HALF 0x0020 /**< Try for 10mbps half-duplex. */
-#define ADVERTISE_10FULL 0x0040 /**< Try for 10mbps full-duplex. */
-#define ADVERTISE_100HALF 0x0080 /**< Try for 100mbps half-duplex. */
-#define ADVERTISE_100FULL 0x0100 /**< Try for 100mbps full-duplex. */
-#define ADVERTISE_100BASE4 0x0200 /**< Try for 100mbps 4k packets. */
-#define ADVERTISE_PAUSE_CAP 0x0400 /**< Try for pause. */
-#define ADVERTISE_PAUSE_ASYM 0x0800 /**< Try for asymetric pause. */
-#define ADVERTISE_RESV 0x1000 /**< Unused. */
-#define ADVERTISE_RFAULT 0x2000 /**< Say we can detect faults. */
-#define ADVERTISE_LPACK 0x4000 /**< Ack link partners response. */
-#define ADVERTISE_NPAGE 0x8000 /**< Next page bit. */
-
-#define ADVERTISE_FULL (ADVERTISE_100FULL | ADVERTISE_10FULL | \
- ADVERTISE_CSMA)
-#define ADVERTISE_ALL (ADVERTISE_10HALF | ADVERTISE_10FULL | \
- ADVERTISE_100HALF | ADVERTISE_100FULL)
-
-/*
- * Link partner ability register.
- */
-#define LPA_SLCT 0x001f /**< Same as advertise selector. */
-#define LPA_10HALF 0x0020 /**< Can do 10mbps half-duplex. */
-#define LPA_10FULL 0x0040 /**< Can do 10mbps full-duplex. */
-#define LPA_100HALF 0x0080 /**< Can do 100mbps half-duplex. */
-#define LPA_100FULL 0x0100 /**< Can do 100mbps full-duplex. */
-#define LPA_100BASE4 0x0200 /**< Can do 100mbps 4k packets. */
-#define LPA_PAUSE_CAP 0x0400 /**< Can pause. */
-#define LPA_PAUSE_ASYM 0x0800 /**< Can pause asymetrically. */
-#define LPA_RESV 0x1000 /**< Unused. */
-#define LPA_RFAULT 0x2000 /**< Link partner faulted. */
-#define LPA_LPACK 0x4000 /**< Link partner acked us. */
-#define LPA_NPAGE 0x8000 /**< Next page bit. */
-
-#define LPA_DUPLEX (LPA_10FULL | LPA_100FULL)
-#define LPA_100 (LPA_100FULL | LPA_100HALF | LPA_100BASE4)
-
-/*
- * Expansion register for auto-negotiation.
- */
-#define EXPANSION_NWAY 0x0001 /**< Can do N-way auto-nego. */
-#define EXPANSION_LCWP 0x0002 /**< Got new RX page code word. */
-#define EXPANSION_ENABLENPAGE 0x0004 /**< This enables npage words. */
-#define EXPANSION_NPCAPABLE 0x0008 /**< Link partner supports npage. */
-#define EXPANSION_MFAULTS 0x0010 /**< Multiple faults detected. */
-#define EXPANSION_RESV 0xffe0 /**< Unused. */
-
-/*
- * N-way test register.
- */
-#define NWAYTEST_RESV1 0x00ff /**< Unused. */
-#define NWAYTEST_LOOPBACK 0x0100 /**< Enable loopback for N-way. */
-#define NWAYTEST_RESV2 0xfe00 /**< Unused. */
-
-/*
- * PHY identifiers.
- */
-#define MII_DM9161_ID 0x0181b8a0
-#define MII_AM79C875_ID 0x00225540
-#define MII_KS8721_ID 0x00221610
-#define MII_STE101P_ID 0x00061C50
-#define MII_DP83848I_ID 0x20005C90
-
-#endif /* _MII_H_ */
-
-/** @} */
|