1 files changed, 23 insertions, 0 deletions
diff --git a/demos/AVR/NIL-ARDUINO-MEGA/readme.txt b/demos/AVR/NIL-ARDUINO-MEGA/readme.txt
new file mode 100644
index 000000000..9df55d7f0
--- /dev/null
+++ b/demos/AVR/NIL-ARDUINO-MEGA/readme.txt
@@ -0,0 +1,23 @@
+*****************************************************************************
+** ChibiOS/NIL port for Atmel AVR ATmega2560.                              **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an Arduino Mega board.
+
+** The Demo **
+
+One thread prints a message to the serial console, which is available on
+the board USB connector (FT232 converter).
+
+Another thread toggles the LED on PB7 (pin 13 on Arduino IDE) every 500ms.
+
+** Build Procedure **
+
+The demo was built using the GCC AVR toolchain. It should build with WinAVR too!
+
+** Notes **
+
+This demo runs natively so the Arduino bootloader must be removed and the FUSEs
+reprogrammed. The values used for fuses are LFUSE=0xe7 and HFUSE=0x99.