1 files changed, 85 insertions, 0 deletions
diff --git a/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-WOLFSSL-HALCRYPTO/main.c b/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-WOLFSSL-HALCRYPTO/main.c
new file mode 100644
index 000000000..48525faea
--- /dev/null
+++ b/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-WOLFSSL-HALCRYPTO/main.c
@@ -0,0 +1,85 @@
+/*
+    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+
+
+BaseSequentialStream *serialp;
+
+extern void wolfCrypt_Init(void);
+extern void wolfcrypt_test(void);
+/*
+ * Green LED blinker thread, times are in milliseconds.
+ */
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+  chRegSetThreadName("blinker");
+  while (TRUE) {
+    palClearLine(LINE_LED_BLUE);
+    chThdSleepMilliseconds(500);
+    palSetLine(LINE_LED_BLUE);
+    chThdSleepMilliseconds(500);
+  }
+}
+
+static const SerialConfig sdcfg = { 115200, 0,UART_MR_PAR_NO };
+static const CRYConfig cryptoconf = {
+    TRANSFER_POLLING,
+    AES_CFBS_128,       //cfbs
+};
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  sdStart(&SD1, &sdcfg);
+
+  serialp =(BaseSequentialStream *)&SD1;
+
+  	/* Redirecting  UART0 RX on PD2 and UART0 TX on PD3. */
+  	palSetGroupMode(PIOD, PAL_PORT_BIT(2) | PAL_PORT_BIT(3), 0U,
+  			PAL_SAMA_FUNC_PERIPH_A | PAL_MODE_SECURE);
+
+  	cryStart(&CRYD1, &cryptoconf);
+  /*
+   * Creates the blinker thread.
+   */
+  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
+
+  wolfCrypt_Init();
+  wolfcrypt_test();
+  /*
+   * Normal main() thread activity, in this demo it does nothing except
+   * sleeping in a loop and check the button state.
+   */
+  while (true) {
+    chThdSleepMilliseconds(500);
+  }
+}