diff options
Diffstat (limited to 'demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-NSEC/main.c')
| -rwxr-xr-x | demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-NSEC/main.c | 155 |
1 files changed, 0 insertions, 155 deletions
diff --git a/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-NSEC/main.c b/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-NSEC/main.c deleted file mode 100755 index 8320a69e6..000000000 --- a/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-NSEC/main.c +++ /dev/null @@ -1,155 +0,0 @@ -/*
- ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-#include "tsclient.h"
-#include "daemons/tssockskel.h"
-#include "daemons/tsioblksskel.h"
-#include "rt_test_root.h"
-#include "oslib_test_root.h"
-#include "chprintf.h"
-#include "lwipthread.h"
-#include "sama_sdmmc_lld.h"
-
-/*
- * LED blinker thread, times are in milliseconds.
- */
-static THD_WORKING_AREA(waThread1, 512);
-static THD_FUNCTION(Thread1, arg) {
-
- (void)arg;
- chRegSetThreadName("blinker");
-
- while (true) {
- palToggleLine(LINE_KEYBACK_LED_RED);
- chThdSleepMilliseconds(80);
- palToggleLine(LINE_KEYBACK_LED_RED);
- chThdSleepMilliseconds(120);
- palToggleLine(LINE_KEYBACK_LED_RED);
- chThdSleepMilliseconds(120);
- palToggleLine(LINE_KEYBACK_LED_RED);
- chThdSleepMilliseconds(120);
- palToggleLine(LINE_KEYBACK_LED_RED);
- chThdSleepMilliseconds(160);
- palToggleLine(LINE_KEYBACK_LED_RED);
- chThdSleepMilliseconds(600);
- }
-}
-
-static const SerialConfig sdcfg = {
- 115200,
- 0,
- UART_MR_PAR_NO
-};
-
-#define BLOCK_CNT_MAX 32u
-#define DMADL_CNT_MAX 64u
-#define BLOCK_CNT 3u
-
-CACHE_ALIGNED uint8_t data_buf[BLOCK_CNT_MAX * 512ul];
-CACHE_ALIGNED static uint32_t dma_table[DMADL_CNT_MAX * SDMMC_DMADL_SIZE];
-CACHE_ALIGNED uint8_t sdmmcbuffer[ROUND_UP_MULT(SDMMC_BUFFER_SIZE, L1_CACHE_BYTES)];
-
-static const SamaSDMMCConfig sdmmc_cfg = {
- SDMMC_SLOT0,
- sdmmcbuffer,
- data_buf,
- sizeof data_buf,
- dma_table,
- DMADL_CNT_MAX
-};
-
-bool sdmmcGetInstance(uint8_t index, SdmmcDriver **sdmmcp)
-{
- (void)index;
-
- *sdmmcp = &SDMMCD1;
- return true;
-}
-
-/*
- * Application entry point.
- */
-int main(void) {
- ts_service_t tssvc;
- /*
- * System initializations.
- * - HAL initialization, this also initializes the configured device drivers
- * and performs the board-specific initializations.
- * - Kernel initialization, the main() function becomes a thread and the
- * RTOS is active.
- */
- halInit();
- chSysInit();
- lwipInit(NULL);
-
- /*
- * Activates the serial driver 0 using the driver default configuration.
- */
- sdStart(&SD1, &sdcfg);
-
- /*
- * Creates the blinker thread.
- */
- chThdCreateStatic(waThread1, sizeof waThread1, NORMALPRIO-1, Thread1, NULL);
-
- /*
- * Init and open the sdmmc device.
- */
- sdmmcInit();
- sdmmcStart(&SDMMCD1, &sdmmc_cfg);
- if (SDMMCD1.state != MCID_INIT_ERROR) {
- sdmmcOpenDevice(&SDMMCD1);
- } else {
- chprintf((BaseSequentialStream *)&SD1, "Cannot start sdmmc device.\r\n");
- sdmmcStop(&SDMMCD1);
- }
-
- tsSocksSkelInit();
- tsIOBlksSkelInit();
-
- /*
- * Call the dummy secure service
- */
- chprintf((BaseSequentialStream*)&SD1, "Calling the secure service\n\r");
-
- /* Retrieve the service handle by name */
- tssvc = (ts_service_t) tsInvokeServiceNoYield(TS_HND_DISCOVERY,
- (ts_params_area_t)"TsSimpleService", sizeof "TsSimpleService");
- if ((int32_t)tssvc < 0) {
- chprintf((BaseSequentialStream*)&SD1, "Cannot get the handle of '%s': %d\r\n",
- "TsSimpleService", tssvc);
- }
- /*
- * Normal main() thread activity, in this demo it does nothing except
- * calling periodically the dummy service and check the button state.
- */
- while (true) {
- msg_t r;
-
- /* Invoke the service */
- r = tsInvokeServiceNoYield(tssvc, (ts_params_area_t)"HELO", sizeof "HELO");
- chprintf((BaseSequentialStream*)&SD1, "Call result: %d\r\n", r);
-#if 0
- if(!palReadPad(PIOB, PIOB_USER_PB)) {
- test_execute((BaseSequentialStream *)&SD1, &rt_test_suite);
- test_execute((BaseSequentialStream *)&SD1, &oslib_test_suite);
- }
-#endif
- chThdSleepMilliseconds(500);
- }
-}
|