diff options
Diffstat (limited to 'demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-HTTPS-NSEC')
17 files changed, 0 insertions, 5720 deletions
diff --git a/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-HTTPS-NSEC/.cproject b/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-HTTPS-NSEC/.cproject deleted file mode 100755 index 99484da24..000000000 --- a/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-HTTPS-NSEC/.cproject +++ /dev/null @@ -1,50 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
- <storageModule moduleId="org.eclipse.cdt.core.settings">
- <cconfiguration id="0.114656749">
- <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.114656749" moduleId="org.eclipse.cdt.core.settings" name="Default">
- <externalSettings/>
- <extensions>
- <extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
- <extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
- <extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
- <extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
- <extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
- <extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
- </extensions>
- </storageModule>
- <storageModule moduleId="cdtBuildSystem" version="4.0.0">
- <configuration artifactName="${ProjName}" buildProperties="" description="" id="0.114656749" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
- <folderInfo id="0.114656749." name="/" resourcePath="">
- <toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.1182750861" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
- <targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.1182750861.169007201" name=""/>
- <builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.579570726" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
- <tool id="org.eclipse.cdt.build.core.settings.holder.libs.2143276802" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
- <tool id="org.eclipse.cdt.build.core.settings.holder.1873650595" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
- <inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1337802279" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
- </tool>
- <tool id="org.eclipse.cdt.build.core.settings.holder.1707090075" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
- <inputType id="org.eclipse.cdt.build.core.settings.holder.inType.338985256" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
- </tool>
- <tool id="org.eclipse.cdt.build.core.settings.holder.1165165914" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
- <inputType id="org.eclipse.cdt.build.core.settings.holder.inType.714476670" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
- </tool>
- </toolChain>
- </folderInfo>
- </configuration>
- </storageModule>
- <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
- </cconfiguration>
- </storageModule>
- <storageModule moduleId="cdtBuildSystem" version="4.0.0">
- <project id="RT-SAMA5D2-XPLAINED-HTTPS-NSEC.null.1703860681" name="RT-SAMA5D2-XPLAINED-HTTPS-NSEC"/>
- </storageModule>
- <storageModule moduleId="scannerConfiguration">
- <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
- <scannerConfigBuildInfo instanceId="0.114656749">
- <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
- </scannerConfigBuildInfo>
- </storageModule>
- <storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
- <storageModule moduleId="refreshScope"/>
-</cproject>
diff --git a/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-HTTPS-NSEC/.project b/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-HTTPS-NSEC/.project deleted file mode 100644 index 6cba6c290..000000000 --- a/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-HTTPS-NSEC/.project +++ /dev/null @@ -1,90 +0,0 @@ -<?xml version="1.0" encoding="UTF-8"?> -<projectDescription> - <name>RT-SAMA5D2-XPLAINED-HTTPS-NSEC</name> - <comment></comment> - <projects> - </projects> - <buildSpec> - <buildCommand> - <name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name> - <triggers>clean,full,incremental,</triggers> - <arguments> - <dictionary> - <key>?name?</key> - <value></value> - </dictionary> - <dictionary> - <key>org.eclipse.cdt.make.core.append_environment</key> - <value>true</value> - </dictionary> - <dictionary> - <key>org.eclipse.cdt.make.core.autoBuildTarget</key> - <value>all</value> - </dictionary> - <dictionary> - <key>org.eclipse.cdt.make.core.buildArguments</key> - <value>-j1</value> - </dictionary> - <dictionary> - <key>org.eclipse.cdt.make.core.buildCommand</key> - <value>make</value> - </dictionary> - <dictionary> - <key>org.eclipse.cdt.make.core.cleanBuildTarget</key> - <value>clean</value> - </dictionary> - <dictionary> - <key>org.eclipse.cdt.make.core.contents</key> - <value>org.eclipse.cdt.make.core.activeConfigSettings</value> - </dictionary> - <dictionary> - <key>org.eclipse.cdt.make.core.enableAutoBuild</key> - <value>false</value> - </dictionary> - <dictionary> - <key>org.eclipse.cdt.make.core.enableCleanBuild</key> - <value>true</value> - </dictionary> - <dictionary> - <key>org.eclipse.cdt.make.core.enableFullBuild</key> - <value>true</value> - </dictionary> - <dictionary> - <key>org.eclipse.cdt.make.core.fullBuildTarget</key> - <value>all</value> - </dictionary> - <dictionary> - <key>org.eclipse.cdt.make.core.stopOnError</key> - <value>true</value> - </dictionary> - <dictionary> - <key>org.eclipse.cdt.make.core.useDefaultBuildCmd</key> - <value>true</value> - </dictionary> - </arguments> - </buildCommand> - <buildCommand> - <name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name> - <triggers>full,incremental,</triggers> - <arguments> - </arguments> - </buildCommand> - </buildSpec> - <natures> - <nature>org.eclipse.cdt.core.cnature</nature> - <nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature> - <nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature> - </natures> - <linkedResources> - <link> - <name>board</name> - <type>2</type> - <locationURI>CHIBIOS/os/hal/boards/ATSAMA5D2_XULT_NSEC</locationURI> - </link> - <link> - <name>os</name> - <type>2</type> - <locationURI>CHIBIOS/os</locationURI> - </link> - </linkedResources> -</projectDescription> diff --git a/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-HTTPS-NSEC/Makefile b/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-HTTPS-NSEC/Makefile deleted file mode 100755 index e353c4ecb..000000000 --- a/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-HTTPS-NSEC/Makefile +++ /dev/null @@ -1,254 +0,0 @@ -##############################################################################
-# Build global options
-# NOTE: Can be overridden externally.
-#
-
-# Compiler options here.
-ifeq ($(USE_OPT),)
- USE_OPT = -Og -ggdb -fomit-frame-pointer -falign-functions=16
-endif
-
-# C specific options here (added to USE_OPT).
-ifeq ($(USE_COPT),)
- USE_COPT =
-endif
-
-# C++ specific options here (added to USE_OPT).
-ifeq ($(USE_CPPOPT),)
- USE_CPPOPT = -fno-rtti
-endif
-
-# Enable this if you want the linker to remove unused code and data
-ifeq ($(USE_LINK_GC),)
- USE_LINK_GC = yes
-endif
-
-# Linker extra options here.
-ifeq ($(USE_LDOPT),)
- USE_LDOPT =
-endif
-
-# Enable this if you want link time optimizations (LTO)
-ifeq ($(USE_LTO),)
- USE_LTO = yes
-endif
-
-# If enabled, this option allows to compile the application in THUMB mode.
-ifeq ($(USE_THUMB),)
- USE_THUMB = no
-endif
-
-# Enable this if you want to see the full log while compiling.
-ifeq ($(USE_VERBOSE_COMPILE),)
- USE_VERBOSE_COMPILE = no
-endif
-
-# If enabled, this option makes the build process faster by not compiling
-# modules not used in the current configuration.
-ifeq ($(USE_SMART_BUILD),)
- USE_SMART_BUILD = yes
-endif
-
-#
-# Build global options
-##############################################################################
-
-##############################################################################
-# Architecture or project specific options
-#
-
-# Stack size to be allocated to the ARM System/User stack. This
-# stack is the stack used by the main() thread.
-ifeq ($(USE_SYSTEM_STACKSIZE),)
- USE_SYSTEM_STACKSIZE = 0x800
-endif
-
-# Stack size to the allocated to the ARM IRQ stack. This
-# stack is used for processing interrupts and exceptions.
-ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
- USE_IRQ_STACKSIZE = 0x800
-endif
-
-# Stack size to the allocated to the ARM FIQ stack. This
-# stack is used for processing interrupts and exceptions.
-ifeq ($(USE_FIQ_STACKSIZE),)
- USE_FIQ_STACKSIZE = 0x800
-endif
-
-# Stack size to the allocated to the ARM Supervisor stack. This
-# stack is used for processing interrupts and exceptions.
-ifeq ($(USE_SUPERVISOR_STACKSIZE),)
- USE_SUPERVISOR_STACKSIZE = 8
-endif
-
-# Stack size to the allocated to the ARM Undefined stack. This
-# stack is used for processing interrupts and exceptions.
-ifeq ($(USE_UND_STACKSIZE),)
- USE_UND_STACKSIZE = 8
-endif
-
-# Stack size to the allocated to the ARM Abort stack. This
-# stack is used for processing interrupts and exceptions.
-ifeq ($(USE_ABT_STACKSIZE),)
- USE_ABT_STACKSIZE = 8
-endif
-
-# Enables the use of FPU.
-ifeq ($(USE_FPU),)
- USE_FPU = no
-endif
-
-#
-# Architecture or project specific options
-##############################################################################
-
-##############################################################################
-# Project, sources and paths
-#
-
-# Define project name here
-PROJECT = ch
-BUILDDIR := ./build
-DEPDIR := ./.dep
-
-# Imported source files and paths
-CHIBIOS = ../../..
-
-# Licensing files.
-include $(CHIBIOS)/os/license/license.mk
-# Startup files.
-include $(CHIBIOS)/os/common/startup/ARM/compilers/GCC/mk/startup_sama5d2.mk
-# HAL-OSAL files (optional).
-include $(CHIBIOS)/os/hal/hal.mk
-include $(CHIBIOS)/os/hal/ports/SAMA/SAMA5D2x/platform.mk
-include $(CHIBIOS)/os/hal/boards/ATSAMA5D2_XULT_NSEC/board.mk
-include $(CHIBIOS)/os/hal/osal/rt/osal.mk
-# RTOS files (optional).
-include $(CHIBIOS)/os/rt/rt.mk
-include $(CHIBIOS)/os/common/ports/ARM/compilers/GCC/mk/port_generic.mk
-# Other files (optional).
-include $(CHIBIOS)/test/lib/test.mk
-include $(CHIBIOS)/test/rt/rt_test.mk
-include $(CHIBIOS)/test/oslib/oslib_test.mk
-include $(CHIBIOS)/os/hal/lib/streams/streams.mk
-include lwip.mk
-
-# Define linker script file here
-LDSCRIPT= $(STARTUPLD)/SAMA5D2ddr.ld
-
-# C sources that can be compiled in ARM or THUMB mode depending on the global
-# setting.
-CSRC = $(ALLCSRC) \
- $(TESTSRC) \
- $(CHIBIOS)/os/various/evtimer.c \
- daemons/tssockskel.c \
- tsclient.c \
- lwipthread.c \
- main.c
-
-# C++ sources that can be compiled in ARM or THUMB mode depending on the global
-# setting.
-CPPSRC = $(ALLCPPSRC)
-
-# C sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-ACSRC =
-
-# C++ sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-ACPPSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-TCSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-TCPPSRC =
-
-# List ASM source files here
-ASMSRC = $(ALLASMSRC)
-ASMXSRC = $(ALLXASMSRC)
-
-INCDIR = $(ALLINC) $(TESTINC) \
- $(LWINC) \
- $(CHIBIOS)/os/various
-
-#
-# Project, sources and paths
-##############################################################################
-
-##############################################################################
-# Compiler settings
-#
-
-MCU = cortex-a5
-
-#TRGT = arm-elf-
-TRGT = arm-none-eabi-
-CC = $(TRGT)gcc
-CPPC = $(TRGT)g++
-# Enable loading with g++ only if you need C++ runtime support.
-# NOTE: You can use C++ even without C++ support if you are careful. C++
-# runtime support makes code size explode.
-LD = $(TRGT)gcc
-#LD = $(TRGT)g++
-CP = $(TRGT)objcopy
-AS = $(TRGT)gcc -x assembler-with-cpp
-AR = $(TRGT)ar
-OD = $(TRGT)objdump
-SZ = $(TRGT)size
-HEX = $(CP) -O ihex
-BIN = $(CP) -O binary
-
-# ARM-specific options here
-AOPT =
-
-# THUMB-specific options here
-TOPT = -mthumb -DTHUMB
-
-# Define C warning options here
-CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
-
-# Define C++ warning options here
-CPPWARN = -Wall -Wextra -Wundef
-
-#
-# Compiler settings
-##############################################################################
-
-##############################################################################
-# Start of user section
-#
-
-# List all user C define here, like -D_DEBUG=1
-UDEFS =
-
-# Define ASM defines here
-UADEFS =
-
-# List all user directories here
-UINCDIR =
-
-# List the user directory to look for the libraries here
-ULIBDIR =
-
-# List all user libraries here
-ULIBS =
-
-#
-# End of user defines
-##############################################################################
-
-RULESPATH = $(CHIBIOS)/os/common/startup/ARMCAx-TZ/compilers/GCC
-include $(RULESPATH)/rules.mk
-
-##############################################################################
-# MISRA check rule, requires PCLint and the setup files, not provided.
-#
-misra:
- @lint-nt -v -w3 $(DEFS) pclint/co-gcc.lnt pclint/au-misra3.lnt pclint/waivers.lnt $(IINCDIR) $(CSRC) &> misra.txt
diff --git a/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-HTTPS-NSEC/chconf.h b/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-HTTPS-NSEC/chconf.h deleted file mode 100755 index edd82e2b5..000000000 --- a/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-HTTPS-NSEC/chconf.h +++ /dev/null @@ -1,714 +0,0 @@ -/*
- ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file templates/chconf.h
- * @brief Configuration file template.
- * @details A copy of this file must be placed in each project directory, it
- * contains the application specific kernel settings.
- *
- * @addtogroup config
- * @details Kernel related settings and hooks.
- * @{
- */
-
-#ifndef CHCONF_H
-#define CHCONF_H
-
-#define _CHIBIOS_RT_CONF_
-#define _CHIBIOS_RT_CONF_VER_6_0_
-
-/*===========================================================================*/
-/**
- * @name System timers settings
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief System time counter resolution.
- * @note Allowed values are 16 or 32 bits.
- */
-#if !defined(CH_CFG_ST_RESOLUTION)
-#define CH_CFG_ST_RESOLUTION 32
-#endif
-
-/**
- * @brief System tick frequency.
- * @details Frequency of the system timer that drives the system ticks. This
- * setting also defines the system tick time unit.
- */
-#if !defined(CH_CFG_ST_FREQUENCY)
-#define CH_CFG_ST_FREQUENCY 1000=/*=periodic=tick.=*/
-#endif
-
-/**
- * @brief Time intervals data size.
- * @note Allowed values are 16, 32 or 64 bits.
- */
-#if !defined(CH_CFG_INTERVALS_SIZE)
-#define CH_CFG_INTERVALS_SIZE 32
-#endif
-
-/**
- * @brief Time types data size.
- * @note Allowed values are 16 or 32 bits.
- */
-#if !defined(CH_CFG_TIME_TYPES_SIZE)
-#define CH_CFG_TIME_TYPES_SIZE 32
-#endif
-
-/**
- * @brief Time delta constant for the tick-less mode.
- * @note If this value is zero then the system uses the classic
- * periodic tick. This value represents the minimum number
- * of ticks that is safe to specify in a timeout directive.
- * The value one is not valid, timeouts are rounded up to
- * this value.
- */
-#if !defined(CH_CFG_ST_TIMEDELTA)
-#define CH_CFG_ST_TIMEDELTA 0
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel parameters and options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Round robin interval.
- * @details This constant is the number of system ticks allowed for the
- * threads before preemption occurs. Setting this value to zero
- * disables the preemption for threads with equal priority and the
- * round robin becomes cooperative. Note that higher priority
- * threads can still preempt, the kernel is always preemptive.
- * @note Disabling the round robin preemption makes the kernel more compact
- * and generally faster.
- * @note The round robin preemption is not supported in tickless mode and
- * must be set to zero in that case.
- */
-#if !defined(CH_CFG_TIME_QUANTUM)
-#define CH_CFG_TIME_QUANTUM 0
-#endif
-
-/**
- * @brief Managed RAM size.
- * @details Size of the RAM area to be managed by the OS. If set to zero
- * then the whole available RAM is used. The core memory is made
- * available to the heap allocator and/or can be used directly through
- * the simplified core memory allocator.
- *
- * @note In order to let the OS manage the whole RAM the linker script must
- * provide the @p __heap_base__ and @p __heap_end__ symbols.
- * @note Requires @p CH_CFG_USE_MEMCORE.
- */
-#if !defined(CH_CFG_MEMCORE_SIZE)
-#define CH_CFG_MEMCORE_SIZE 0
-#endif
-
-/**
- * @brief Idle thread automatic spawn suppression.
- * @details When this option is activated the function @p chSysInit()
- * does not spawn the idle thread. The application @p main()
- * function becomes the idle thread and must implement an
- * infinite loop.
- */
-#if !defined(CH_CFG_NO_IDLE_THREAD)
-#define CH_CFG_NO_IDLE_THREAD FALSE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Performance options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief OS optimization.
- * @details If enabled then time efficient rather than space efficient code
- * is used when two possible implementations exist.
- *
- * @note This is not related to the compiler optimization options.
- * @note The default is @p TRUE.
- */
-#if !defined(CH_CFG_OPTIMIZE_SPEED)
-#define CH_CFG_OPTIMIZE_SPEED TRUE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Subsystem options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Time Measurement APIs.
- * @details If enabled then the time measurement APIs are included in
- * the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_TM)
-#define CH_CFG_USE_TM FALSE
-#endif
-
-/**
- * @brief Threads registry APIs.
- * @details If enabled then the registry APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_REGISTRY)
-#define CH_CFG_USE_REGISTRY TRUE
-#endif
-
-/**
- * @brief Threads synchronization APIs.
- * @details If enabled then the @p chThdWait() function is included in
- * the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_WAITEXIT)
-#define CH_CFG_USE_WAITEXIT TRUE
-#endif
-
-/**
- * @brief Semaphores APIs.
- * @details If enabled then the Semaphores APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_SEMAPHORES)
-#define CH_CFG_USE_SEMAPHORES TRUE
-#endif
-
-/**
- * @brief Semaphores queuing mode.
- * @details If enabled then the threads are enqueued on semaphores by
- * priority rather than in FIFO order.
- *
- * @note The default is @p FALSE. Enable this if you have special
- * requirements.
- * @note Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
-#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
-#endif
-
-/**
- * @brief Mutexes APIs.
- * @details If enabled then the mutexes APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_MUTEXES)
-#define CH_CFG_USE_MUTEXES TRUE
-#endif
-
-/**
- * @brief Enables recursive behavior on mutexes.
- * @note Recursive mutexes are heavier and have an increased
- * memory footprint.
- *
- * @note The default is @p FALSE.
- * @note Requires @p CH_CFG_USE_MUTEXES.
- */
-#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
-#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
-#endif
-
-/**
- * @brief Conditional Variables APIs.
- * @details If enabled then the conditional variables APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_MUTEXES.
- */
-#if !defined(CH_CFG_USE_CONDVARS)
-#define CH_CFG_USE_CONDVARS TRUE
-#endif
-
-/**
- * @brief Conditional Variables APIs with timeout.
- * @details If enabled then the conditional variables APIs with timeout
- * specification are included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_CONDVARS.
- */
-#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
-#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
-#endif
-
-/**
- * @brief Events Flags APIs.
- * @details If enabled then the event flags APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_EVENTS)
-#define CH_CFG_USE_EVENTS TRUE
-#endif
-
-/**
- * @brief Events Flags APIs with timeout.
- * @details If enabled then the events APIs with timeout specification
- * are included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_EVENTS.
- */
-#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
-#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
-#endif
-
-/**
- * @brief Synchronous Messages APIs.
- * @details If enabled then the synchronous messages APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_MESSAGES)
-#define CH_CFG_USE_MESSAGES TRUE
-#endif
-
-/**
- * @brief Synchronous Messages queuing mode.
- * @details If enabled then messages are served by priority rather than in
- * FIFO order.
- *
- * @note The default is @p FALSE. Enable this if you have special
- * requirements.
- * @note Requires @p CH_CFG_USE_MESSAGES.
- */
-#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
-#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
-#endif
-
-/**
- * @brief Mailboxes APIs.
- * @details If enabled then the asynchronous messages (mailboxes) APIs are
- * included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#if !defined(CH_CFG_USE_MAILBOXES)
-#define CH_CFG_USE_MAILBOXES TRUE
-#endif
-
-/**
- * @brief Core Memory Manager APIs.
- * @details If enabled then the core memory manager APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_MEMCORE)
-#define CH_CFG_USE_MEMCORE TRUE
-#endif
-
-/**
- * @brief Heap Allocator APIs.
- * @details If enabled then the memory heap allocator APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
- * @p CH_CFG_USE_SEMAPHORES.
- * @note Mutexes are recommended.
- */
-#if !defined(CH_CFG_USE_HEAP)
-#define CH_CFG_USE_HEAP TRUE
-#endif
-
-/**
- * @brief Memory Pools Allocator APIs.
- * @details If enabled then the memory pools allocator APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_MEMPOOLS)
-#define CH_CFG_USE_MEMPOOLS TRUE
-#endif
-
-/**
- * @brief Objects FIFOs APIs.
- * @details If enabled then the objects FIFOs APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_OBJ_FIFOS)
-#define CH_CFG_USE_OBJ_FIFOS TRUE
-#endif
-
-/**
- * @brief Pipes APIs.
- * @details If enabled then the pipes APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_PIPES)
-#define CH_CFG_USE_PIPES TRUE
-#endif
-
-/**
- * @brief Dynamic Threads APIs.
- * @details If enabled then the dynamic threads creation APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_WAITEXIT.
- * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
- */
-#if !defined(CH_CFG_USE_DYNAMIC)
-#define CH_CFG_USE_DYNAMIC TRUE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Objects factory options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Objects Factory APIs.
- * @details If enabled then the objects factory APIs are included in the
- * kernel.
- *
- * @note The default is @p FALSE.
- */
-#if !defined(CH_CFG_USE_FACTORY)
-#define CH_CFG_USE_FACTORY TRUE
-#endif
-
-/**
- * @brief Maximum length for object names.
- * @details If the specified length is zero then the name is stored by
- * pointer but this could have unintended side effects.
- */
-#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
-#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
-#endif
-
-/**
- * @brief Enables the registry of generic objects.
- */
-#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
-#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
-#endif
-
-/**
- * @brief Enables factory for generic buffers.
- */
-#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
-#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
-#endif
-
-/**
- * @brief Enables factory for semaphores.
- */
-#if !defined(CH_CFG_FACTORY_SEMAPHORES)
-#define CH_CFG_FACTORY_SEMAPHORES TRUE
-#endif
-
-/**
- * @brief Enables factory for mailboxes.
- */
-#if !defined(CH_CFG_FACTORY_MAILBOXES)
-#define CH_CFG_FACTORY_MAILBOXES TRUE
-#endif
-
-/**
- * @brief Enables factory for objects FIFOs.
- */
-#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
-#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
-#endif
-
-/**
- * @brief Enables factory for Pipes.
- */
-#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__)
-#define CH_CFG_FACTORY_PIPES TRUE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Debug options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Debug option, kernel statistics.
- *
- * @note The default is @p FALSE.
- */
-#if !defined(CH_DBG_STATISTICS)
-#define CH_DBG_STATISTICS FALSE
-#endif
-
-/**
- * @brief Debug option, system state check.
- * @details If enabled the correct call protocol for system APIs is checked
- * at runtime.
- *
- * @note The default is @p FALSE.
- */
-#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
-#define CH_DBG_SYSTEM_STATE_CHECK TRUE
-#endif
-
-/**
- * @brief Debug option, parameters checks.
- * @details If enabled then the checks on the API functions input
- * parameters are activated.
- *
- * @note The default is @p FALSE.
- */
-#if !defined(CH_DBG_ENABLE_CHECKS)
-#define CH_DBG_ENABLE_CHECKS TRUE
-#endif
-
-/**
- * @brief Debug option, consistency checks.
- * @details If enabled then all the assertions in the kernel code are
- * activated. This includes consistency checks inside the kernel,
- * runtime anomalies and port-defined checks.
- *
- * @note The default is @p FALSE.
- */
-#if !defined(CH_DBG_ENABLE_ASSERTS)
-#define CH_DBG_ENABLE_ASSERTS TRUE
-#endif
-
-/**
- * @brief Debug option, trace buffer.
- * @details If enabled then the trace buffer is activated.
- *
- * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
- */
-#if !defined(CH_DBG_TRACE_MASK)
-#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
-#endif
-
-/**
- * @brief Trace buffer entries.
- * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
- * different from @p CH_DBG_TRACE_MASK_DISABLED.
- */
-#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
-#define CH_DBG_TRACE_BUFFER_SIZE 128
-#endif
-
-/**
- * @brief Debug option, stack checks.
- * @details If enabled then a runtime stack check is performed.
- *
- * @note The default is @p FALSE.
- * @note The stack check is performed in a architecture/port dependent way.
- * It may not be implemented or some ports.
- * @note The default failure mode is to halt the system with the global
- * @p panic_msg variable set to @p NULL.
- */
-#if !defined(CH_DBG_ENABLE_STACK_CHECK)
-#define CH_DBG_ENABLE_STACK_CHECK FALSE
-#endif
-
-/**
- * @brief Debug option, stacks initialization.
- * @details If enabled then the threads working area is filled with a byte
- * value when a thread is created. This can be useful for the
- * runtime measurement of the used stack.
- *
- * @note The default is @p FALSE.
- */
-#if !defined(CH_DBG_FILL_THREADS)
-#define CH_DBG_FILL_THREADS FALSE
-#endif
-
-/**
- * @brief Debug option, threads profiling.
- * @details If enabled then a field is added to the @p thread_t structure that
- * counts the system ticks occurred while executing the thread.
- *
- * @note The default is @p FALSE.
- * @note This debug option is not currently compatible with the
- * tickless mode.
- */
-#if !defined(CH_DBG_THREADS_PROFILING)
-#define CH_DBG_THREADS_PROFILING FALSE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel hooks
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief System structure extension.
- * @details User fields added to the end of the @p ch_system_t structure.
- */
-#define CH_CFG_SYSTEM_EXTRA_FIELDS \
- /* Add threads custom fields here.*/
-
-/**
- * @brief System initialization hook.
- * @details User initialization code added to the @p chSysInit() function
- * just before interrupts are enabled globally.
- */
-#define CH_CFG_SYSTEM_INIT_HOOK() { \
- /* Add threads initialization code here.*/ \
-}
-
-/**
- * @brief Threads descriptor structure extension.
- * @details User fields added to the end of the @p thread_t structure.
- */
-#define CH_CFG_THREAD_EXTRA_FIELDS \
- /* Add threads custom fields here.*/
-
-/**
- * @brief Threads initialization hook.
- * @details User initialization code added to the @p _thread_init() function.
- *
- * @note It is invoked from within @p _thread_init() and implicitly from all
- * the threads creation APIs.
- */
-#define CH_CFG_THREAD_INIT_HOOK(tp) { \
- /* Add threads initialization code here.*/ \
-}
-
-/**
- * @brief Threads finalization hook.
- * @details User finalization code added to the @p chThdExit() API.
- */
-#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
- /* Add threads finalization code here.*/ \
-}
-
-/**
- * @brief Context switch hook.
- * @details This hook is invoked just before switching between threads.
- */
-#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
- /* Context switch code here.*/ \
-}
-
-/**
- * @brief ISR enter hook.
- */
-#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
- /* IRQ prologue code here.*/ \
-}
-
-/**
- * @brief ISR exit hook.
- */
-#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
- /* IRQ epilogue code here.*/ \
-}
-
-/**
- * @brief Idle thread enter hook.
- * @note This hook is invoked within a critical zone, no OS functions
- * should be invoked from here.
- * @note This macro can be used to activate a power saving mode.
- */
-#define CH_CFG_IDLE_ENTER_HOOK() { \
- /* Idle-enter code here.*/ \
-}
-
-/**
- * @brief Idle thread leave hook.
- * @note This hook is invoked within a critical zone, no OS functions
- * should be invoked from here.
- * @note This macro can be used to deactivate a power saving mode.
- */
-#define CH_CFG_IDLE_LEAVE_HOOK() { \
- /* Idle-leave code here.*/ \
-}
-
-/**
- * @brief Idle Loop hook.
- * @details This hook is continuously invoked by the idle thread loop.
- */
-#define CH_CFG_IDLE_LOOP_HOOK() { \
- /* Idle loop code here.*/ \
-}
-
-/**
- * @brief System tick event hook.
- * @details This hook is invoked in the system tick handler immediately
- * after processing the virtual timers queue.
- */
-#define CH_CFG_SYSTEM_TICK_HOOK() { \
- /* System tick event code here.*/ \
-}
-
-/**
- * @brief System halt hook.
- * @details This hook is invoked in case to a system halting error before
- * the system is halted.
- */
-#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
- /* System halt code here.*/ \
-}
-
-/**
- * @brief Trace hook.
- * @details This hook is invoked each time a new record is written in the
- * trace buffer.
- */
-#define CH_CFG_TRACE_HOOK(tep) { \
- /* Trace code here.*/ \
-}
-
-/** @} */
-
-/*===========================================================================*/
-/* Port-specific settings (override port settings defaulted in chcore.h). */
-/*===========================================================================*/
-
-#endif /* CHCONF_H */
-
-/** @} */
diff --git a/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-HTTPS-NSEC/daemons/tscommon.h b/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-HTTPS-NSEC/daemons/tscommon.h deleted file mode 100644 index 411411ad8..000000000 --- a/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-HTTPS-NSEC/daemons/tscommon.h +++ /dev/null @@ -1,91 +0,0 @@ -/*
- ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio.
-
- This file is part of ChibiOS.
-
- ChibiOS is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- ChibiOS is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/**
- * @file tscommon.h
- * @brief Common, shared defines and macros between secure and non secure
- * environment.
- *
- */
-
-#ifndef TSCOMMON_H
-#define TSCOMMON_H
-
-#include "ch.h"
-#include "ccportab.h"
-
-/*===========================================================================*/
-/* Module constants. */
-/*===========================================================================*/
-#define SKEL_REQ_GETOP 1
-#define SKEL_REQ_CPYPRMS 2
-#define SKEL_REQ_PUTRES 3
-#define SKEL_REQ_READY 4
-
-#define STUB_OP_SOCKET 0
-#define STUB_OP_CLOSE 1
-#define STUB_OP_CONNECT 2
-#define STUB_OP_RECV 3
-#define STUB_OP_SEND 4
-#define STUB_OP_SELECT 5
-#define STUB_OP_BIND 6
-#define STUB_OP_LISTEN 7
-#define STUB_OP_WRITE 8
-#define STUB_OP_READ 9
-#define STUB_OP_GETADDRINFO 10
-#define STUB_OP_FREEADDRINFO 11
-
-#define EVT_F_SOCK_NEW_OP 1
-
-/*===========================================================================*/
-/* Module pre-compile time settings. */
-/*===========================================================================*/
-#define METHOD_MAX_PARAMS 6
-
-#define L_FD_SETSIZE 64
-
-/*===========================================================================*/
-/* Derived constants and error checks. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Module data structures and types. */
-/*===========================================================================*/
-typedef struct skel_req {
- uint32_t req; /* getop, cpyprms, putres */
- uint32_t stub_op;
- uint32_t stub_op_code;
- uint32_t stub_op_result;
- uint32_t stub_op_p_sz[METHOD_MAX_PARAMS];
- uint32_t stub_op_p[METHOD_MAX_PARAMS];
-} skel_req_t;
-
-/*===========================================================================*/
-/* Module macros. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* External declarations. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Module inline functions. */
-/*===========================================================================*/
-
-#endif /* TSCOMMON_H */
diff --git a/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-HTTPS-NSEC/daemons/tssockskel.c b/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-HTTPS-NSEC/daemons/tssockskel.c deleted file mode 100644 index a13bb31ac..000000000 --- a/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-HTTPS-NSEC/daemons/tssockskel.c +++ /dev/null @@ -1,499 +0,0 @@ -/*
- ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file tssockskel.c
- * @brief Sockets skeleton daemon for trusted clients.
- *
- */
-
-#include "ch.h"
-#include "chobjfifos.h"
-#include "tsclient.h"
-#include "tssockskel.h"
-#include <string.h>
-
-/*===========================================================================*/
-/* Module local definitions. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Module exported variables. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Module local types. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Module local variables. */
-/*===========================================================================*/
-
-static ts_service_t tsStubsService = NULL;
-static MUTEX_DECL(tsStubsServiceMtx);
-
-static objects_fifo_t skel_req_fifo;
-static msg_t skel_req_msgs[N_SOCKSKEL_THD];
-static skel_req_t skel_reqs[N_SOCKSKEL_THD] = {0};
-
-/*===========================================================================*/
-/* Module local functions. */
-/*===========================================================================*/
-
-/**
- * @brief Invoke the stubs service in order to copy the 'in'
- * parameters in the non secure memory space.
- */
-static void paramsInFromRemote(skel_req_t *skreqp) {
- msg_t r;
-
- skreqp->req = SKEL_REQ_CPYPRMS;
- chMtxLock(&tsStubsServiceMtx);
- r = tsInvokeServiceNoYield(tsStubsService,
- (ts_params_area_t)skreqp, sizeof *skreqp);
- chDbgAssert(r != SMC_SVC_BUSY, "Unexpected SMC_SVC_BUSY");
- chMtxUnlock(&tsStubsServiceMtx);
-}
-
-/**
- * @brief Invoke the stubs service in order to copy the 'out'
- * parameters in the secure memory space and set the
- * remote call result.
- */
-static void returnToRemote(skel_req_t *skreqp, uint32_t res) {
- msg_t r;
-
- skreqp->stub_op_result = res;
- skreqp->req = SKEL_REQ_PUTRES;
-
- chMtxLock(&tsStubsServiceMtx);
- r = tsInvokeServiceNoYield(tsStubsService,
- (ts_params_area_t)skreqp, sizeof *skreqp);
- chDbgAssert(r != SMC_SVC_BUSY, "Unexpected SMC_SVC_BUSY");
- chMtxUnlock(&tsStubsServiceMtx);
- chFifoReturnObject(&skel_req_fifo, skreqp);
-}
-
-/**
- * @name Sockets API skeletons.
- * @{
- */
-
-/**
- * @brief int socket(int domain, int type, int protocol)
- */
-static void l_socket(skel_req_t *skreqp) {
- int result;
-
- /* call the api exposed by the TCP/IP stack.*/
- result = socket((int)skreqp->stub_op_p[0],
- (int)skreqp->stub_op_p[1],
- (int)skreqp->stub_op_p[2]);
-
- /* report the result and copy the 'out' parameters.*/
- returnToRemote(skreqp, result);
-}
-
-/**
- * @brief int connect(int s, const struct sockaddr *name, socklen_t namelen)
- */
-static void l_connect(skel_req_t *skreqp) {
- int s, result, socklen;
- struct sockaddr sockaddr;
-
- s = (int)skreqp->stub_op_p[0];
- skreqp->stub_op_p[1] = (uint32_t)&sockaddr;
- socklen = (int)skreqp->stub_op_p[2];
-
- /* Call the stub service in order to copy the 'in' parameter
- sockaddr.*/
- paramsInFromRemote(skreqp);
-
- /* Call the api exposed by the TCP/IP stack.*/
- result = connect(s, &sockaddr, socklen);
-
- /* Report the result.*/
- returnToRemote(skreqp, result);
-}
-
-/**
- * @brief int close(int s)
- */
-static void l_close(skel_req_t *skreqp) {
- int result;
-
- /* Call the api exposed by the TCP/IP stack.*/
- result = close((int)skreqp->stub_op_p[0]);
-
- /* report the result.*/
- returnToRemote(skreqp, result);
-}
-
-
-/**
- * @brief int recv(int s, void *mem, size_t len, int flags)
- */
-static void l_recv(skel_req_t *skreqp) {
- int result;
- void *mem;
- size_t len;
-
- len = skreqp->stub_op_p[2];
-
- /* Allocate the space for the receive buffer.*/
- mem = chHeapAlloc(NULL, len);
- if (NULL == mem) {
- result = ENOMEM;
- } else {
-
- /* call the api exposed by the TCP/IP stack.*/
- result = recv((int)skreqp->stub_op_p[0], mem, len,
- (int)skreqp->stub_op_p[3]);
- skreqp->stub_op_p_sz[1] = result;
- skreqp->stub_op_p[1] = (uint32_t)mem;
- }
-
- /* report the result and copy 'out' parameter mem.*/
- returnToRemote(skreqp, result);
- if (NULL != mem)
- chHeapFree(mem);
-}
-
-/**
- * @brief int send(int s, const void *dataptr, size_t size, int flags)
- */
-static void l_send(skel_req_t *skreqp) {
- int result;
- void *dataptr;
- size_t size;
-
- size = skreqp->stub_op_p[2];
-
- /* Allocate the space for the send buffer.*/
- dataptr = chHeapAlloc(NULL, size);
- if (NULL == dataptr) {
- result = ENOMEM;
- } else {
- skreqp->stub_op_p[1] = (uint32_t)dataptr;
-
- /* call the stub service in order to copy the
- 'in' parameter dataptr.*/
- paramsInFromRemote(skreqp);
-
- /* call the api exposed by the TCP/IP stack.*/
- result = send((int)skreqp->stub_op_p[0], dataptr, size,
- (int)skreqp->stub_op_p[3]);
- chHeapFree(dataptr);
- }
-
- /* report the result.*/
- returnToRemote(skreqp, result);
-}
-
-
-/**
- * @brief int select(int maxfdp1, fd_set *readset, fd_set *writeset, fd_set *exceptset,
- * struct timeval *timeout)
- */
-static void l_select(skel_req_t *skreqp) {
- int result;
- int maxfdpl;
- fd_set readset, writeset, exceptset;
- struct timeval timeout;
-
- maxfdpl = skreqp->stub_op_p[0];
-
- skreqp->stub_op_p_sz[1] = sizeof (fd_set);
- skreqp->stub_op_p_sz[2] = sizeof (fd_set);
- skreqp->stub_op_p_sz[3] = sizeof (fd_set);
- skreqp->stub_op_p[1] = (uint32_t)&readset;
- skreqp->stub_op_p[2] = (uint32_t)&writeset;
- skreqp->stub_op_p[3] = (uint32_t)&exceptset;
- skreqp->stub_op_p[4] = (uint32_t)&timeout;
-
- /* call the stub service in order to copy the
- 'in' parameter readset, writeset, exceptset and timeout.*/
- paramsInFromRemote(skreqp);
-
- /* call the api exposed by the TCP/IP stack.*/
- result = select(maxfdpl, &readset, &writeset, &exceptset, &timeout);
-
- /* report the result and the parameters readset, writeset and exceptset.*/
- returnToRemote(skreqp, result);
-}
-
-/**
- * @brief bind(int s, const struct sockaddr *name, socklen_t namelen);
- */
-static void l_bind(skel_req_t *skreqp) {
- int s, result, socklen;
- struct sockaddr sockaddr;
-
- s = (int)skreqp->stub_op_p[0];
- skreqp->stub_op_p[1] = (uint32_t)&sockaddr;
- socklen = (int)skreqp->stub_op_p[2];
-
- /* Call the stub service in order to copy the 'in' parameter
- sockaddr.*/
- paramsInFromRemote(skreqp);
-
- /* Call the api exposed by the TCP/IP stack.*/
- result = bind(s, &sockaddr, socklen);
-
- /* Report the result.*/
- returnToRemote(skreqp, result);
-}
-
-/**
- * @brief listen(int s, int backlog);
- */
-static void l_listen(skel_req_t *skreqp) {
- int s, result, backlog;
-
- s = (int)skreqp->stub_op_p[0];
- backlog = (int)skreqp->stub_op_p[1];
-
- /* Call the api exposed by the TCP/IP stack.*/
- result = listen(s, backlog);
-
- /* Report the result.*/
- returnToRemote(skreqp, result);
-}
-
-/**
- * @brief write(int s, const void *dataptr, size_t size);
- */
-static void l_write(skel_req_t *skreqp) {
- int result;
- void *dataptr;
- size_t size;
-
- size = skreqp->stub_op_p[2];
-
- /* Allocate the space for the send buffer.*/
- dataptr = chHeapAlloc(NULL, size);
- if (NULL == dataptr) {
- result = ENOMEM;
- } else {
- skreqp->stub_op_p[1] = (uint32_t)dataptr;
-
- /* call the stub service in order to copy the
- 'in' parameter dataptr.*/
- paramsInFromRemote(skreqp);
-
- /* call the api exposed by the TCP/IP stack.*/
- result = write((int)skreqp->stub_op_p[0], dataptr, size);
- chHeapFree(dataptr);
- }
- /* Report the result.*/
- returnToRemote(skreqp, result);
-}
-
-/**
- * @brief int read(int s, void *mem, size_t len);
- */
-static void l_read(skel_req_t *skreqp) {
- int result;
- void *mem;
- size_t len;
-
- len = skreqp->stub_op_p[2];
-
- /* Allocate the space for the receive buffer.*/
- mem = chHeapAlloc(NULL, len);
- if (NULL == mem) {
- result = ENOMEM;
- } else {
-
- /* call the api exposed by the TCP/IP stack.*/
- result = read((int)skreqp->stub_op_p[0], mem, len);
- skreqp->stub_op_p_sz[1] = result;
- skreqp->stub_op_p[1] = (uint32_t)mem;
- }
-
- /* report the result and copy 'out' parameter mem.*/
- returnToRemote(skreqp, result);
- if (NULL != mem)
- chHeapFree(mem);
-}
-
-/**
- * @brief int lwip_getaddrinfo(const char *nodename, const char *servname,
- * const struct addrinfo *hints,
- * struct addrinfo **res);
- */
-static void l_getaddrinfo(skel_req_t *skreqp) {
-
- int result;
- char nodename;
- char servname;
- struct addrinfo hints;
- struct addrinfo *res;
-
- skreqp->stub_op_p[0] = (uint32_t)&nodename;
- skreqp->stub_op_p[1] = (uint32_t)&servname;
- skreqp->stub_op_p[2] = (uint32_t)&hints;
- skreqp->stub_op_p_sz[3] = sizeof (res);
- skreqp->stub_op_p[3] = (uint32_t)&res;
-
- /* Call the stub service in order to copy the 'in' parameter.*/
- paramsInFromRemote(skreqp);
-
- /* Call the api exposed by the TCP/IP stack.*/
- result = getaddrinfo(&nodename, &servname, &hints, &res);
-
- /* Report the result.*/
- returnToRemote(skreqp, result);
-}
-
-/**
- * @brief int freeaddrinfo(struct addrinfo *ai);
- */
-static void l_freeaddrinfo(skel_req_t *skreqp) {
-
- int result = 0;
- struct addrinfo ai;
-
- skreqp->stub_op_p[0] = (uint32_t)&ai;
-
- /* Call the stub service in order to copy the 'in' parameter.*/
- paramsInFromRemote(skreqp);
-
- /* Call the api exposed by the TCP/IP stack.*/
- freeaddrinfo(&ai);
-
- /* Report the result.*/
- returnToRemote(skreqp, result);
-}
-/** @} */
-
-/*===========================================================================*/
-/* Module exported functions. */
-/*===========================================================================*/
-
-/**
- * @brief Dispatch a request to a local method.
- */
-static THD_FUNCTION(TsSockSkelDaemon, arg) {
- (void)arg;
-
- skel_req_t *skreqp;
-
- for (;/* ever */;) {
- chFifoReceiveObjectTimeout(&skel_req_fifo, (void **)&skreqp,
- TIME_INFINITE);
- switch (skreqp->stub_op_code) {
- case STUB_OP_SOCKET:
- l_socket(skreqp);
- break;
- case STUB_OP_CONNECT:
- l_connect(skreqp);
- break;
- case STUB_OP_CLOSE:
- l_close(skreqp);
- break;
- case STUB_OP_RECV:
- l_recv(skreqp);
- break;
- case STUB_OP_SEND:
- l_send(skreqp);
- break;
- case STUB_OP_SELECT:
- l_select(skreqp);
- break;
- case STUB_OP_BIND:
- l_bind(skreqp);
- break;
- case STUB_OP_LISTEN:
- l_listen(skreqp);
- break;
- case STUB_OP_WRITE:
- l_write(skreqp);
- break;
- case STUB_OP_READ:
- l_read(skreqp);
- break;
- case STUB_OP_GETADDRINFO:
- l_getaddrinfo(skreqp);
- break;
- case STUB_OP_FREEADDRINFO:
- l_freeaddrinfo(skreqp);
- break;
- default:
- break;
- }
- }
-}
-
-/**
- * @brief Dispatch a request to a skeleton worker thread.
- */
-static THD_WORKING_AREA(waTsSkelsDaemon, 512);
-static THD_FUNCTION(TsSkelsDaemon, arg) {
- (void)arg;
-
- event_listener_t el;
- skel_req_t *skreqp;
- msg_t r;
-
- chEvtRegisterMaskWithFlags(&stubsEventSource, &el, ALL_EVENTS,
- EVT_F_SOCK_NEW_OP);
- tsStubsService = (ts_service_t)tsInvokeServiceNoYield(TS_HND_DISCOVERY,
- (ts_params_area_t)"TsStubsService", sizeof "TsStubsService");
-
- /* Tell to stubs service that we are ready.*/
- skreqp = chFifoTakeObjectTimeout(&skel_req_fifo, TIME_INFINITE);
- skreqp->req = SKEL_REQ_READY;
- tsInvokeServiceNoYield(tsStubsService, (ts_params_area_t)skreqp,
- sizeof *skreqp);
- chFifoReturnObject(&skel_req_fifo, skreqp);
-
- /* Start to receive ops from stubs.*/
- for (;/* ever */;) {
- chEvtWaitAny(ALL_EVENTS);
- (void)chEvtGetAndClearFlags(&el);
- while (true) {
- skreqp = chFifoTakeObjectTimeout(&skel_req_fifo, TIME_INFINITE);
- skreqp->req = SKEL_REQ_GETOP;
- chMtxLock(&tsStubsServiceMtx);
- r = tsInvokeServiceNoYield(tsStubsService, (ts_params_area_t)skreqp,
- sizeof *skreqp);
- chDbgAssert(r != SMC_SVC_BUSY, "Unexpected SMC_SVC_BUSY");
- chMtxUnlock(&tsStubsServiceMtx);
- if (r == SMC_SVC_NHND)
- break;
- chFifoSendObject(&skel_req_fifo, skreqp);
- }
- chFifoReturnObject(&skel_req_fifo, skreqp);
- }
-}
-
-/**
- * @brief Init the skeletons daemon objects and create the
- * corresponding threads.
- */
-void tsSkelsDaemonInit(void) {
- int i;
-
- chFifoObjectInit(&skel_req_fifo, sizeof (skel_req_t), N_SOCKSKEL_THD,
- sizeof (uint8_t), skel_reqs, skel_req_msgs);
-
- for (i = 0; i < N_SOCKSKEL_THD; ++i)
- chThdCreateFromHeap(NULL, 2048, "TsSkelDaemonWrk", NORMALPRIO,
- TsSockSkelDaemon, NULL);
- chThdCreateStatic(waTsSkelsDaemon, sizeof waTsSkelsDaemon, NORMALPRIO,
- TsSkelsDaemon, NULL);
-}
diff --git a/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-HTTPS-NSEC/daemons/tssockskel.h b/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-HTTPS-NSEC/daemons/tssockskel.h deleted file mode 100644 index 6d26678c7..000000000 --- a/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-HTTPS-NSEC/daemons/tssockskel.h +++ /dev/null @@ -1,78 +0,0 @@ -/*
- ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio.
-
- This file is part of ChibiOS.
-
- ChibiOS is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- ChibiOS is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/**
- * @file tssockskel.h
- * @brief Sockets skeleton module macros and structures.
- *
- */
-
-#ifndef TSSOCKSKEL_H
-#define TSSOCKSKEL_H
-
-#include "ch.h"
-#include "ccportab.h"
-#include "lwip/netdb.h"
-#include "lwip/sockets.h"
-#include "tscommon.h"
-
-/*===========================================================================*/
-/* Module constants. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Module pre-compile time settings. */
-/*===========================================================================*/
-#define N_SOCKSKEL_THD 4
-
-/*===========================================================================*/
-/* Derived constants and error checks. */
-/*===========================================================================*/
-#if (L_FD_SETSIZE) != (FD_SETSIZE)
-#error "Configuration error of L_FD_SETSIZE, it must be set to FD_SETSIZE "
-#define VALUE(x) #x
-#define VAR_NAME_VALUE(var) #var "=" VALUE(var)
-#pragma message(VAR_NAME_VALUE(FD_SETSIZE))
-#endif
-
-/*===========================================================================*/
-/* Module data structures and types. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Module macros. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* External declarations. */
-/*===========================================================================*/
-
-#ifdef __cplusplus
-extern "C" {
-#endif
- void tsSkelsDaemonInit(void);
-#ifdef __cplusplus
-}
-#endif
-
-/*===========================================================================*/
-/* Module inline functions. */
-/*===========================================================================*/
-
-#endif /* TSSOCKSKEL_H */
diff --git a/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-HTTPS-NSEC/halconf.h b/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-HTTPS-NSEC/halconf.h deleted file mode 100644 index 8172f7817..000000000 --- a/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-HTTPS-NSEC/halconf.h +++ /dev/null @@ -1,532 +0,0 @@ -/*
- ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file templates/halconf.h
- * @brief HAL configuration header.
- * @details HAL configuration file, this file allows to enable or disable the
- * various device drivers from your application. You may also use
- * this file in order to override the device drivers default settings.
- *
- * @addtogroup HAL_CONF
- * @{
- */
-
-#ifndef HALCONF_H
-#define HALCONF_H
-
-#define _CHIBIOS_HAL_CONF_
-#define _CHIBIOS_HAL_CONF_VER_6_0_
-
-#include "mcuconf.h"
-
-/**
- * @brief Enables the PAL subsystem.
- */
-#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
-#define HAL_USE_PAL TRUE
-#endif
-
-/**
- * @brief Enables the ADC subsystem.
- */
-#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
-#define HAL_USE_ADC FALSE
-#endif
-
-/**
- * @brief Enables the CAN subsystem.
- */
-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
-#define HAL_USE_CAN FALSE
-#endif
-
-/**
- * @brief Enables the cryptographic subsystem.
- */
-#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__)
-#define HAL_USE_CRY FALSE
-#endif
-
-/**
- * @brief Enables the DAC subsystem.
- */
-#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
-#define HAL_USE_DAC FALSE
-#endif
-
-/**
- * @brief Enables the EXT subsystem.
- */
-#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
-#define HAL_USE_EXT FALSE
-#endif
-
-/**
- * @brief Enables the GPT subsystem.
- */
-#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT FALSE
-#endif
-
-/**
- * @brief Enables the I2C subsystem.
- */
-#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C FALSE
-#endif
-
-/**
- * @brief Enables the I2S subsystem.
- */
-#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
-#define HAL_USE_I2S FALSE
-#endif
-
-/**
- * @brief Enables the ICU subsystem.
- */
-#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
-#define HAL_USE_ICU FALSE
-#endif
-
-/**
- * @brief Enables the MAC subsystem.
- */
-#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
-#define HAL_USE_MAC TRUE
-#endif
-
-/**
- * @brief Enables the MMC_SPI subsystem.
- */
-#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_MMC_SPI FALSE
-#endif
-
-/**
- * @brief Enables the PWM subsystem.
- */
-#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM FALSE
-#endif
-
-/**
- * @brief Enables the RTC subsystem.
- */
-#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
-#define HAL_USE_RTC FALSE
-#endif
-
-/**
- * @brief Enables the SDC subsystem.
- */
-#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
-#define HAL_USE_SDC FALSE
-#endif
-
-/**
- * @brief Enables the SERIAL subsystem.
- */
-#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL TRUE
-#endif
-
-/**
- * @brief Enables the SERIAL over USB subsystem.
- */
-#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL_USB FALSE
-#endif
-
-/**
- * @brief Enables the SIO subsystem.
- */
-#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__)
-#define HAL_USE_SIO FALSE
-#endif
-
-/**
- * @brief Enables the SPI subsystem.
- */
-#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_SPI FALSE
-#endif
-
-/**
- * @brief Enables the TRNG subsystem.
- */
-#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__)
-#define HAL_USE_TRNG FALSE
-#endif
-
-/**
- * @brief Enables the UART subsystem.
- */
-#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
-#define HAL_USE_UART FALSE
-#endif
-
-/**
- * @brief Enables the USB subsystem.
- */
-#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
-#define HAL_USE_USB FALSE
-#endif
-
-/**
- * @brief Enables the WDG subsystem.
- */
-#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
-#define HAL_USE_WDG FALSE
-#endif
-
-/**
- * @brief Enables the WSPI subsystem.
- */
-#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__)
-#define HAL_USE_WSPI FALSE
-#endif
-
-/*===========================================================================*/
-/* PAL driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__)
-#define PAL_USE_CALLBACKS FALSE
-#endif
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__)
-#define PAL_USE_WAIT FALSE
-#endif
-
-/*===========================================================================*/
-/* ADC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
-#define ADC_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define ADC_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* CAN driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Sleep mode related APIs inclusion switch.
- */
-#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
-#define CAN_USE_SLEEP_MODE TRUE
-#endif
-
-/**
- * @brief Enforces the driver to use direct callbacks rather than OSAL events.
- */
-#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__)
-#define CAN_ENFORCE_USE_CALLBACKS FALSE
-#endif
-
-/*===========================================================================*/
-/* CRY driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables the SW fall-back of the cryptographic driver.
- * @details When enabled, this option, activates a fall-back software
- * implementation for algorithms not supported by the underlying
- * hardware.
- * @note Fall-back implementations may not be present for all algorithms.
- */
-#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__)
-#define HAL_CRY_USE_FALLBACK FALSE
-#endif
-
-/**
- * @brief Makes the driver forcibly use the fall-back implementations.
- */
-#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__)
-#define HAL_CRY_ENFORCE_FALLBACK FALSE
-#endif
-
-/*===========================================================================*/
-/* DAC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__)
-#define DAC_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define DAC_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* I2C driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables the mutual exclusion APIs on the I2C bus.
- */
-#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define I2C_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* MAC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables the zero-copy API.
- */
-#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
-#define MAC_USE_ZERO_COPY FALSE
-#endif
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
-#define MAC_USE_EVENTS TRUE
-#endif
-
-/*===========================================================================*/
-/* MMC_SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- * This option is recommended also if the SPI driver does not
- * use a DMA channel and heavily loads the CPU.
- */
-#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
-#define MMC_NICE_WAITING TRUE
-#endif
-
-/*===========================================================================*/
-/* SDC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Number of initialization attempts before rejecting the card.
- * @note Attempts are performed at 10mS intervals.
- */
-#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
-#define SDC_INIT_RETRY 100
-#endif
-
-/**
- * @brief Include support for MMC cards.
- * @note MMC support is not yet implemented so this option must be kept
- * at @p FALSE.
- */
-#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
-#define SDC_MMC_SUPPORT FALSE
-#endif
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- */
-#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
-#define SDC_NICE_WAITING TRUE
-#endif
-
-/**
- * @brief OCR initialization constant for V20 cards.
- */
-#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__)
-#define SDC_INIT_OCR_V20 0x50FF8000U
-#endif
-
-/**
- * @brief OCR initialization constant for non-V20 cards.
- */
-#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__)
-#define SDC_INIT_OCR 0x80100000U
-#endif
-
-/*===========================================================================*/
-/* SERIAL driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Default bit rate.
- * @details Configuration parameter, this is the baud rate selected for the
- * default configuration.
- */
-#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
-#define SERIAL_DEFAULT_BITRATE 38400
-#endif
-
-/**
- * @brief Serial buffers size.
- * @details Configuration parameter, you can change the depth of the queue
- * buffers depending on the requirements of your application.
- * @note The default is 16 bytes for both the transmission and receive
- * buffers.
- */
-#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_BUFFERS_SIZE 16
-#endif
-
-/*===========================================================================*/
-/* SERIAL_USB driver related setting. */
-/*===========================================================================*/
-
-/**
- * @brief Serial over USB buffers size.
- * @details Configuration parameter, the buffer size must be a multiple of
- * the USB data endpoint maximum packet size.
- * @note The default is 256 bytes for both the transmission and receive
- * buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_SIZE 256
-#endif
-
-/**
- * @brief Serial over USB number of buffers.
- * @note The default is 2 buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_NUMBER 2
-#endif
-
-/*===========================================================================*/
-/* SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
-#define SPI_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables circular transfers APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__)
-#define SPI_USE_CIRCULAR FALSE
-#endif
-
-
-/**
- * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define SPI_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/**
- * @brief Handling method for SPI CS line.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__)
-#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD
-#endif
-
-/*===========================================================================*/
-/* UART driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
-#define UART_USE_WAIT FALSE
-#endif
-
-/**
- * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define UART_USE_MUTUAL_EXCLUSION FALSE
-#endif
-
-/*===========================================================================*/
-/* USB driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
-#define USB_USE_WAIT FALSE
-#endif
-
-/*===========================================================================*/
-/* WSPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__)
-#define WSPI_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define WSPI_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-#endif /* HALCONF_H */
-
-/** @} */
diff --git a/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-HTTPS-NSEC/lwip.mk b/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-HTTPS-NSEC/lwip.mk deleted file mode 100644 index f96cc7983..000000000 --- a/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-HTTPS-NSEC/lwip.mk +++ /dev/null @@ -1,20 +0,0 @@ -# List of the required lwIP files.
-LWIPDIR = $(CHIBIOS)/ext/lwip/src
-
-# The various blocks of files are outlined in Filelists.mk.
-include $(LWIPDIR)/Filelists.mk
-
-LWBINDSRC = \
- $(CHIBIOS)/os/various/lwip_bindings/arch/sys_arch.c
-
-
-# Add blocks of files from Filelists.mk as required for enabled options
-LWSRC = $(COREFILES) $(CORE4FILES) $(APIFILES) $(LWBINDSRC) $(NETIFFILES)
-
-LWINC = \
- $(CHIBIOS)/os/various/lwip_bindings \
- $(LWIPDIR)/include
-
-# Shared variables
-ALLCSRC += $(LWSRC)
-ALLINC += $(LWINC)
diff --git a/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-HTTPS-NSEC/lwipopts.h b/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-HTTPS-NSEC/lwipopts.h deleted file mode 100644 index 3c4a42665..000000000 --- a/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-HTTPS-NSEC/lwipopts.h +++ /dev/null @@ -1,2133 +0,0 @@ -/*
- * Copyright (c) 2001-2003 Swedish Institute of Computer Science.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
- * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
- * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * This file is part of the lwIP TCP/IP stack.
- *
- * Author: Simon Goldschmidt
- *
- */
-#ifndef LWIP_HDR_LWIPOPTS_H__
-#define LWIP_HDR_LWIPOPTS_H__
-
-/* Fixed settings mandated by the ChibiOS integration.*/
-#include "static_lwipopts.h"
-#include <stdlib.h>
-
-/*
- -----------------------------------------------
- ---------- Platform specific locking ----------
- -----------------------------------------------
-*/
-
-/**
- * SYS_LIGHTWEIGHT_PROT==1: if you want inter-task protection for certain
- * critical regions during buffer allocation, deallocation and memory
- * allocation and deallocation.
- */
-#ifndef SYS_LIGHTWEIGHT_PROT
-#define SYS_LIGHTWEIGHT_PROT 1
-#endif
-
-/**
- * NO_SYS==1: Provides VERY minimal functionality. Otherwise,
- * use lwIP facilities.
- */
-#ifndef NO_SYS
-#define NO_SYS 0
-#endif
-
-/**
- * NO_SYS_NO_TIMERS==1: Drop support for sys_timeout when NO_SYS==1
- * Mainly for compatibility to old versions.
- */
-#ifndef NO_SYS_NO_TIMERS
-#define NO_SYS_NO_TIMERS 0
-#endif
-
-/**
- * MEMCPY: override this if you have a faster implementation at hand than the
- * one included in your C library
- */
-#ifndef MEMCPY
-#define MEMCPY(dst,src,len) memcpy(dst,src,len)
-#endif
-
-/**
- * SMEMCPY: override this with care! Some compilers (e.g. gcc) can inline a
- * call to memcpy() if the length is known at compile time and is small.
- */
-#ifndef SMEMCPY
-#define SMEMCPY(dst,src,len) memcpy(dst,src,len)
-#endif
-
-/*
- ------------------------------------
- ---------- Memory options ----------
- ------------------------------------
-*/
-/**
- * MEM_LIBC_MALLOC==1: Use malloc/free/realloc provided by your C-library
- * instead of the lwip internal allocator. Can save code size if you
- * already use it.
- */
-#ifndef MEM_LIBC_MALLOC
-#define MEM_LIBC_MALLOC 0
-#endif
-
-/**
-* MEMP_MEM_MALLOC==1: Use mem_malloc/mem_free instead of the lwip pool allocator.
-* Especially useful with MEM_LIBC_MALLOC but handle with care regarding execution
-* speed and usage from interrupts!
-*/
-#ifndef MEMP_MEM_MALLOC
-#define MEMP_MEM_MALLOC 0
-#endif
-
-/**
- * MEM_ALIGNMENT: should be set to the alignment of the CPU
- * 4 byte alignment -> #define MEM_ALIGNMENT 4
- * 2 byte alignment -> #define MEM_ALIGNMENT 2
- */
-#ifndef MEM_ALIGNMENT
-#define MEM_ALIGNMENT 4
-#endif
-
-/**
- * MEM_SIZE: the size of the heap memory. If the application will send
- * a lot of data that needs to be copied, this should be set high.
- */
-#ifndef MEM_SIZE
-#define MEM_SIZE 1600
-#endif
-
-/**
- * MEMP_SEPARATE_POOLS: if defined to 1, each pool is placed in its own array.
- * This can be used to individually change the location of each pool.
- * Default is one big array for all pools
- */
-#ifndef MEMP_SEPARATE_POOLS
-#define MEMP_SEPARATE_POOLS 0
-#endif
-
-/**
- * MEMP_OVERFLOW_CHECK: memp overflow protection reserves a configurable
- * amount of bytes before and after each memp element in every pool and fills
- * it with a prominent default value.
- * MEMP_OVERFLOW_CHECK == 0 no checking
- * MEMP_OVERFLOW_CHECK == 1 checks each element when it is freed
- * MEMP_OVERFLOW_CHECK >= 2 checks each element in every pool every time
- * memp_malloc() or memp_free() is called (useful but slow!)
- */
-#ifndef MEMP_OVERFLOW_CHECK
-#define MEMP_OVERFLOW_CHECK 0
-#endif
-
-/**
- * MEMP_SANITY_CHECK==1: run a sanity check after each memp_free() to make
- * sure that there are no cycles in the linked lists.
- */
-#ifndef MEMP_SANITY_CHECK
-#define MEMP_SANITY_CHECK 0
-#endif
-
-/**
- * MEM_USE_POOLS==1: Use an alternative to malloc() by allocating from a set
- * of memory pools of various sizes. When mem_malloc is called, an element of
- * the smallest pool that can provide the length needed is returned.
- * To use this, MEMP_USE_CUSTOM_POOLS also has to be enabled.
- */
-#ifndef MEM_USE_POOLS
-#define MEM_USE_POOLS 0
-#endif
-
-/**
- * MEM_USE_POOLS_TRY_BIGGER_POOL==1: if one malloc-pool is empty, try the next
- * bigger pool - WARNING: THIS MIGHT WASTE MEMORY but it can make a system more
- * reliable. */
-#ifndef MEM_USE_POOLS_TRY_BIGGER_POOL
-#define MEM_USE_POOLS_TRY_BIGGER_POOL 0
-#endif
-
-/**
- * MEMP_USE_CUSTOM_POOLS==1: whether to include a user file lwippools.h
- * that defines additional pools beyond the "standard" ones required
- * by lwIP. If you set this to 1, you must have lwippools.h in your
- * inlude path somewhere.
- */
-#ifndef MEMP_USE_CUSTOM_POOLS
-#define MEMP_USE_CUSTOM_POOLS 0
-#endif
-
-/**
- * Set this to 1 if you want to free PBUF_RAM pbufs (or call mem_free()) from
- * interrupt context (or another context that doesn't allow waiting for a
- * semaphore).
- * If set to 1, mem_malloc will be protected by a semaphore and SYS_ARCH_PROTECT,
- * while mem_free will only use SYS_ARCH_PROTECT. mem_malloc SYS_ARCH_UNPROTECTs
- * with each loop so that mem_free can run.
- *
- * ATTENTION: As you can see from the above description, this leads to dis-/
- * enabling interrupts often, which can be slow! Also, on low memory, mem_malloc
- * can need longer.
- *
- * If you don't want that, at least for NO_SYS=0, you can still use the following
- * functions to enqueue a deallocation call which then runs in the tcpip_thread
- * context:
- * - pbuf_free_callback(p);
- * - mem_free_callback(m);
- */
-#ifndef LWIP_ALLOW_MEM_FREE_FROM_OTHER_CONTEXT
-#define LWIP_ALLOW_MEM_FREE_FROM_OTHER_CONTEXT 0
-#endif
-
-/*
- ------------------------------------------------
- ---------- Internal Memory Pool Sizes ----------
- ------------------------------------------------
-*/
-/**
- * MEMP_NUM_PBUF: the number of memp struct pbufs (used for PBUF_ROM and PBUF_REF).
- * If the application sends a lot of data out of ROM (or other static memory),
- * this should be set high.
- */
-#ifndef MEMP_NUM_PBUF
-#define MEMP_NUM_PBUF 16
-#endif
-
-/**
- * MEMP_NUM_RAW_PCB: Number of raw connection PCBs
- * (requires the LWIP_RAW option)
- */
-#ifndef MEMP_NUM_RAW_PCB
-#define MEMP_NUM_RAW_PCB 4
-#endif
-
-/**
- * MEMP_NUM_UDP_PCB: the number of UDP protocol control blocks. One
- * per active UDP "connection".
- * (requires the LWIP_UDP option)
- */
-#ifndef MEMP_NUM_UDP_PCB
-#define MEMP_NUM_UDP_PCB 4
-#endif
-
-/**
- * MEMP_NUM_TCP_PCB: the number of simulatenously active TCP connections.
- * (requires the LWIP_TCP option)
- */
-#ifndef MEMP_NUM_TCP_PCB
-#define MEMP_NUM_TCP_PCB 5
-#endif
-
-/**
- * MEMP_NUM_TCP_PCB_LISTEN: the number of listening TCP connections.
- * (requires the LWIP_TCP option)
- */
-#ifndef MEMP_NUM_TCP_PCB_LISTEN
-#define MEMP_NUM_TCP_PCB_LISTEN 8
-#endif
-
-/**
- * MEMP_NUM_TCP_SEG: the number of simultaneously queued TCP segments.
- * (requires the LWIP_TCP option)
- */
-#ifndef MEMP_NUM_TCP_SEG
-#define MEMP_NUM_TCP_SEG 16
-#endif
-
-/**
- * MEMP_NUM_REASSDATA: the number of IP packets simultaneously queued for
- * reassembly (whole packets, not fragments!)
- */
-#ifndef MEMP_NUM_REASSDATA
-#define MEMP_NUM_REASSDATA 5
-#endif
-
-/**
- * MEMP_NUM_FRAG_PBUF: the number of IP fragments simultaneously sent
- * (fragments, not whole packets!).
- * This is only used with IP_FRAG_USES_STATIC_BUF==0 and
- * LWIP_NETIF_TX_SINGLE_PBUF==0 and only has to be > 1 with DMA-enabled MACs
- * where the packet is not yet sent when netif->output returns.
- */
-#ifndef MEMP_NUM_FRAG_PBUF
-#define MEMP_NUM_FRAG_PBUF 15
-#endif
-
-/**
- * MEMP_NUM_ARP_QUEUE: the number of simulateously queued outgoing
- * packets (pbufs) that are waiting for an ARP request (to resolve
- * their destination address) to finish.
- * (requires the ARP_QUEUEING option)
- */
-#ifndef MEMP_NUM_ARP_QUEUE
-#define MEMP_NUM_ARP_QUEUE 30
-#endif
-
-/**
- * MEMP_NUM_IGMP_GROUP: The number of multicast groups whose network interfaces
- * can be members et the same time (one per netif - allsystems group -, plus one
- * per netif membership).
- * (requires the LWIP_IGMP option)
- */
-#ifndef MEMP_NUM_IGMP_GROUP
-#define MEMP_NUM_IGMP_GROUP 8
-#endif
-
-/**
- * MEMP_NUM_SYS_TIMEOUT: the number of simulateously active timeouts.
- * (requires NO_SYS==0)
- * The default number of timeouts is calculated here for all enabled modules.
- * The formula expects settings to be either '0' or '1'.
- */
-#ifndef MEMP_NUM_SYS_TIMEOUT
-#define MEMP_NUM_SYS_TIMEOUT (LWIP_TCP + IP_REASSEMBLY + LWIP_ARP + (2*LWIP_DHCP) + LWIP_AUTOIP + LWIP_IGMP + LWIP_DNS + PPP_SUPPORT)
-#endif
-
-/**
- * MEMP_NUM_NETBUF: the number of struct netbufs.
- * (only needed if you use the sequential API, like api_lib.c)
- */
-#ifndef MEMP_NUM_NETBUF
-#define MEMP_NUM_NETBUF 2
-#endif
-
-/**
- * MEMP_NUM_NETCONN: the number of struct netconns.
- * (only needed if you use the sequential API, like api_lib.c)
- */
-#ifndef MEMP_NUM_NETCONN
-#define MEMP_NUM_NETCONN 4
-#endif
-
-/**
- * MEMP_NUM_TCPIP_MSG_API: the number of struct tcpip_msg, which are used
- * for callback/timeout API communication.
- * (only needed if you use tcpip.c)
- */
-#ifndef MEMP_NUM_TCPIP_MSG_API
-#define MEMP_NUM_TCPIP_MSG_API 8
-#endif
-
-/**
- * MEMP_NUM_TCPIP_MSG_INPKT: the number of struct tcpip_msg, which are used
- * for incoming packets.
- * (only needed if you use tcpip.c)
- */
-#ifndef MEMP_NUM_TCPIP_MSG_INPKT
-#define MEMP_NUM_TCPIP_MSG_INPKT 8
-#endif
-
-/**
- * MEMP_NUM_SNMP_NODE: the number of leafs in the SNMP tree.
- */
-#ifndef MEMP_NUM_SNMP_NODE
-#define MEMP_NUM_SNMP_NODE 50
-#endif
-
-/**
- * MEMP_NUM_SNMP_ROOTNODE: the number of branches in the SNMP tree.
- * Every branch has one leaf (MEMP_NUM_SNMP_NODE) at least!
- */
-#ifndef MEMP_NUM_SNMP_ROOTNODE
-#define MEMP_NUM_SNMP_ROOTNODE 30
-#endif
-
-/**
- * MEMP_NUM_SNMP_VARBIND: the number of concurrent requests (does not have to
- * be changed normally) - 2 of these are used per request (1 for input,
- * 1 for output)
- */
-#ifndef MEMP_NUM_SNMP_VARBIND
-#define MEMP_NUM_SNMP_VARBIND 2
-#endif
-
-/**
- * MEMP_NUM_SNMP_VALUE: the number of OID or values concurrently used
- * (does not have to be changed normally) - 3 of these are used per request
- * (1 for the value read and 2 for OIDs - input and output)
- */
-#ifndef MEMP_NUM_SNMP_VALUE
-#define MEMP_NUM_SNMP_VALUE 3
-#endif
-
-/**
- * MEMP_NUM_NETDB: the number of concurrently running lwip_addrinfo() calls
- * (before freeing the corresponding memory using lwip_freeaddrinfo()).
- */
-#ifndef MEMP_NUM_NETDB
-#define MEMP_NUM_NETDB 1
-#endif
-
-/**
- * MEMP_NUM_LOCALHOSTLIST: the number of host entries in the local host list
- * if DNS_LOCAL_HOSTLIST_IS_DYNAMIC==1.
- */
-#ifndef MEMP_NUM_LOCALHOSTLIST
-#define MEMP_NUM_LOCALHOSTLIST 1
-#endif
-
-/**
- * MEMP_NUM_PPPOE_INTERFACES: the number of concurrently active PPPoE
- * interfaces (only used with PPPOE_SUPPORT==1)
- */
-#ifndef MEMP_NUM_PPPOE_INTERFACES
-#define MEMP_NUM_PPPOE_INTERFACES 1
-#endif
-
-/**
- * PBUF_POOL_SIZE: the number of buffers in the pbuf pool.
- */
-#ifndef PBUF_POOL_SIZE
-#define PBUF_POOL_SIZE 16
-#endif
-
-/*
- ---------------------------------
- ---------- ARP options ----------
- ---------------------------------
-*/
-/**
- * LWIP_ARP==1: Enable ARP functionality.
- */
-#ifndef LWIP_ARP
-#define LWIP_ARP 1
-#endif
-
-/**
- * ARP_TABLE_SIZE: Number of active MAC-IP address pairs cached.
- */
-#ifndef ARP_TABLE_SIZE
-#define ARP_TABLE_SIZE 20
-#endif
-
-/**
- * ARP_QUEUEING==1: Multiple outgoing packets are queued during hardware address
- * resolution. By default, only the most recent packet is queued per IP address.
- * This is sufficient for most protocols and mainly reduces TCP connection
- * startup time. Set this to 1 if you know your application sends more than one
- * packet in a row to an IP address that is not in the ARP cache.
- */
-#ifndef ARP_QUEUEING
-#define ARP_QUEUEING 0
-#endif
-
-/**
- * ETHARP_TRUST_IP_MAC==1: Incoming IP packets cause the ARP table to be
- * updated with the source MAC and IP addresses supplied in the packet.
- * You may want to disable this if you do not trust LAN peers to have the
- * correct addresses, or as a limited approach to attempt to handle
- * spoofing. If disabled, lwIP will need to make a new ARP request if
- * the peer is not already in the ARP table, adding a little latency.
- * The peer *is* in the ARP table if it requested our address before.
- * Also notice that this slows down input processing of every IP packet!
- */
-#ifndef ETHARP_TRUST_IP_MAC
-#define ETHARP_TRUST_IP_MAC 0
-#endif
-
-/**
- * ETHARP_SUPPORT_VLAN==1: support receiving ethernet packets with VLAN header.
- * Additionally, you can define ETHARP_VLAN_CHECK to an u16_t VLAN ID to check.
- * If ETHARP_VLAN_CHECK is defined, only VLAN-traffic for this VLAN is accepted.
- * If ETHARP_VLAN_CHECK is not defined, all traffic is accepted.
- * Alternatively, define a function/define ETHARP_VLAN_CHECK_FN(eth_hdr, vlan)
- * that returns 1 to accept a packet or 0 to drop a packet.
- */
-#ifndef ETHARP_SUPPORT_VLAN
-#define ETHARP_SUPPORT_VLAN 0
-#endif
-
-/** LWIP_ETHERNET==1: enable ethernet support for PPPoE even though ARP
- * might be disabled
- */
-#ifndef LWIP_ETHERNET
-#define LWIP_ETHERNET (LWIP_ARP || PPPOE_SUPPORT)
-#endif
-
-/** ETH_PAD_SIZE: number of bytes added before the ethernet header to ensure
- * alignment of payload after that header. Since the header is 14 bytes long,
- * without this padding e.g. addresses in the IP header will not be aligned
- * on a 32-bit boundary, so setting this to 2 can speed up 32-bit-platforms.
- */
-#ifndef ETH_PAD_SIZE
-#define ETH_PAD_SIZE 0
-#endif
-
-/** ETHARP_SUPPORT_STATIC_ENTRIES==1: enable code to support static ARP table
- * entries (using etharp_add_static_entry/etharp_remove_static_entry).
- */
-#ifndef ETHARP_SUPPORT_STATIC_ENTRIES
-#define ETHARP_SUPPORT_STATIC_ENTRIES 0
-#endif
-
-
-/*
- --------------------------------
- ---------- IP options ----------
- --------------------------------
-*/
-/**
- * IP_FORWARD==1: Enables the ability to forward IP packets across network
- * interfaces. If you are going to run lwIP on a device with only one network
- * interface, define this to 0.
- */
-#ifndef IP_FORWARD
-#define IP_FORWARD 0
-#endif
-
-/**
- * IP_OPTIONS_ALLOWED: Defines the behavior for IP options.
- * IP_OPTIONS_ALLOWED==0: All packets with IP options are dropped.
- * IP_OPTIONS_ALLOWED==1: IP options are allowed (but not parsed).
- */
-#ifndef IP_OPTIONS_ALLOWED
-#define IP_OPTIONS_ALLOWED 1
-#endif
-
-/**
- * IP_REASSEMBLY==1: Reassemble incoming fragmented IP packets. Note that
- * this option does not affect outgoing packet sizes, which can be controlled
- * via IP_FRAG.
- */
-#ifndef IP_REASSEMBLY
-#define IP_REASSEMBLY 1
-#endif
-
-/**
- * IP_FRAG==1: Fragment outgoing IP packets if their size exceeds MTU. Note
- * that this option does not affect incoming packet sizes, which can be
- * controlled via IP_REASSEMBLY.
- */
-#ifndef IP_FRAG
-#define IP_FRAG 1
-#endif
-
-/**
- * IP_REASS_MAXAGE: Maximum time (in multiples of IP_TMR_INTERVAL - so seconds, normally)
- * a fragmented IP packet waits for all fragments to arrive. If not all fragments arrived
- * in this time, the whole packet is discarded.
- */
-#ifndef IP_REASS_MAXAGE
-#define IP_REASS_MAXAGE 3
-#endif
-
-/**
- * IP_REASS_MAX_PBUFS: Total maximum amount of pbufs waiting to be reassembled.
- * Since the received pbufs are enqueued, be sure to configure
- * PBUF_POOL_SIZE > IP_REASS_MAX_PBUFS so that the stack is still able to receive
- * packets even if the maximum amount of fragments is enqueued for reassembly!
- */
-#ifndef IP_REASS_MAX_PBUFS
-#define IP_REASS_MAX_PBUFS 10
-#endif
-
-/**
- * IP_FRAG_USES_STATIC_BUF==1: Use a static MTU-sized buffer for IP
- * fragmentation. Otherwise pbufs are allocated and reference the original
- * packet data to be fragmented (or with LWIP_NETIF_TX_SINGLE_PBUF==1,
- * new PBUF_RAM pbufs are used for fragments).
- * ATTENTION: IP_FRAG_USES_STATIC_BUF==1 may not be used for DMA-enabled MACs!
- */
-#ifndef IP_FRAG_USES_STATIC_BUF
-#define IP_FRAG_USES_STATIC_BUF 0
-#endif
-
-/**
- * IP_FRAG_MAX_MTU: Assumed max MTU on any interface for IP frag buffer
- * (requires IP_FRAG_USES_STATIC_BUF==1)
- */
-#if IP_FRAG_USES_STATIC_BUF && !defined(IP_FRAG_MAX_MTU)
-#define IP_FRAG_MAX_MTU 1500
-#endif
-
-/**
- * IP_DEFAULT_TTL: Default value for Time-To-Live used by transport layers.
- */
-#ifndef IP_DEFAULT_TTL
-#define IP_DEFAULT_TTL 255
-#endif
-
-/**
- * IP_SOF_BROADCAST=1: Use the SOF_BROADCAST field to enable broadcast
- * filter per pcb on udp and raw send operations. To enable broadcast filter
- * on recv operations, you also have to set IP_SOF_BROADCAST_RECV=1.
- */
-#ifndef IP_SOF_BROADCAST
-#define IP_SOF_BROADCAST 0
-#endif
-
-/**
- * IP_SOF_BROADCAST_RECV (requires IP_SOF_BROADCAST=1) enable the broadcast
- * filter on recv operations.
- */
-#ifndef IP_SOF_BROADCAST_RECV
-#define IP_SOF_BROADCAST_RECV 0
-#endif
-
-/**
- * IP_FORWARD_ALLOW_TX_ON_RX_NETIF==1: allow ip_forward() to send packets back
- * out on the netif where it was received. This should only be used for
- * wireless networks.
- * ATTENTION: When this is 1, make sure your netif driver correctly marks incoming
- * link-layer-broadcast/multicast packets as such using the corresponding pbuf flags!
- */
-#ifndef IP_FORWARD_ALLOW_TX_ON_RX_NETIF
-#define IP_FORWARD_ALLOW_TX_ON_RX_NETIF 0
-#endif
-
-/**
- * LWIP_RANDOMIZE_INITIAL_LOCAL_PORTS==1: randomize the local port for the first
- * local TCP/UDP pcb (default==0). This can prevent creating predictable port
- * numbers after booting a device.
- */
-#ifndef LWIP_RANDOMIZE_INITIAL_LOCAL_PORTS
-#define LWIP_RANDOMIZE_INITIAL_LOCAL_PORTS 0
-#endif
-
-/*
- ----------------------------------
- ---------- ICMP options ----------
- ----------------------------------
-*/
-/**
- * LWIP_ICMP==1: Enable ICMP module inside the IP stack.
- * Be careful, disable that make your product non-compliant to RFC1122
- */
-#ifndef LWIP_ICMP
-#define LWIP_ICMP 1
-#endif
-
-/**
- * ICMP_TTL: Default value for Time-To-Live used by ICMP packets.
- */
-#ifndef ICMP_TTL
-#define ICMP_TTL (IP_DEFAULT_TTL)
-#endif
-
-/**
- * LWIP_BROADCAST_PING==1: respond to broadcast pings (default is unicast only)
- */
-#ifndef LWIP_BROADCAST_PING
-#define LWIP_BROADCAST_PING 0
-#endif
-
-/**
- * LWIP_MULTICAST_PING==1: respond to multicast pings (default is unicast only)
- */
-#ifndef LWIP_MULTICAST_PING
-#define LWIP_MULTICAST_PING 0
-#endif
-
-/*
- ---------------------------------
- ---------- RAW options ----------
- ---------------------------------
-*/
-/**
- * LWIP_RAW==1: Enable application layer to hook into the IP layer itself.
- */
-#ifndef LWIP_RAW
-#define LWIP_RAW 0
-#endif
-
-/**
- * LWIP_RAW==1: Enable application layer to hook into the IP layer itself.
- */
-#ifndef RAW_TTL
-#define RAW_TTL (IP_DEFAULT_TTL)
-#endif
-
-/*
- ----------------------------------
- ---------- DHCP options ----------
- ----------------------------------
-*/
-/**
- * LWIP_DHCP==1: Enable DHCP module.
- */
-#ifndef LWIP_DHCP
-#define LWIP_DHCP 1
-#endif
-
-/**
- * DHCP_DOES_ARP_CHECK==1: Do an ARP check on the offered address.
- */
-#ifndef DHCP_DOES_ARP_CHECK
-#define DHCP_DOES_ARP_CHECK ((LWIP_DHCP) && (LWIP_ARP))
-#endif
-
-/*
- ------------------------------------
- ---------- AUTOIP options ----------
- ------------------------------------
-*/
-/**
- * LWIP_AUTOIP==1: Enable AUTOIP module.
- */
-#ifndef LWIP_AUTOIP
-#define LWIP_AUTOIP 0
-#endif
-
-/**
- * LWIP_DHCP_AUTOIP_COOP==1: Allow DHCP and AUTOIP to be both enabled on
- * the same interface at the same time.
- */
-#ifndef LWIP_DHCP_AUTOIP_COOP
-#define LWIP_DHCP_AUTOIP_COOP 0
-#endif
-
-/**
- * LWIP_DHCP_AUTOIP_COOP_TRIES: Set to the number of DHCP DISCOVER probes
- * that should be sent before falling back on AUTOIP. This can be set
- * as low as 1 to get an AutoIP address very quickly, but you should
- * be prepared to handle a changing IP address when DHCP overrides
- * AutoIP.
- */
-#ifndef LWIP_DHCP_AUTOIP_COOP_TRIES
-#define LWIP_DHCP_AUTOIP_COOP_TRIES 9
-#endif
-
-/*
- ----------------------------------
- ---------- SNMP options ----------
- ----------------------------------
-*/
-/**
- * LWIP_SNMP==1: Turn on SNMP module. UDP must be available for SNMP
- * transport.
- */
-#ifndef LWIP_SNMP
-#define LWIP_SNMP 0
-#endif
-
-/**
- * SNMP_CONCURRENT_REQUESTS: Number of concurrent requests the module will
- * allow. At least one request buffer is required.
- * Does not have to be changed unless external MIBs answer request asynchronously
- */
-#ifndef SNMP_CONCURRENT_REQUESTS
-#define SNMP_CONCURRENT_REQUESTS 1
-#endif
-
-/**
- * SNMP_TRAP_DESTINATIONS: Number of trap destinations. At least one trap
- * destination is required
- */
-#ifndef SNMP_TRAP_DESTINATIONS
-#define SNMP_TRAP_DESTINATIONS 1
-#endif
-
-/**
- * SNMP_PRIVATE_MIB:
- * When using a private MIB, you have to create a file 'private_mib.h' that contains
- * a 'struct mib_array_node mib_private' which contains your MIB.
- */
-#ifndef SNMP_PRIVATE_MIB
-#define SNMP_PRIVATE_MIB 0
-#endif
-
-/**
- * Only allow SNMP write actions that are 'safe' (e.g. disabeling netifs is not
- * a safe action and disabled when SNMP_SAFE_REQUESTS = 1).
- * Unsafe requests are disabled by default!
- */
-#ifndef SNMP_SAFE_REQUESTS
-#define SNMP_SAFE_REQUESTS 1
-#endif
-
-/**
- * The maximum length of strings used. This affects the size of
- * MEMP_SNMP_VALUE elements.
- */
-#ifndef SNMP_MAX_OCTET_STRING_LEN
-#define SNMP_MAX_OCTET_STRING_LEN 127
-#endif
-
-/**
- * The maximum depth of the SNMP tree.
- * With private MIBs enabled, this depends on your MIB!
- * This affects the size of MEMP_SNMP_VALUE elements.
- */
-#ifndef SNMP_MAX_TREE_DEPTH
-#define SNMP_MAX_TREE_DEPTH 15
-#endif
-
-/**
- * The size of the MEMP_SNMP_VALUE elements, normally calculated from
- * SNMP_MAX_OCTET_STRING_LEN and SNMP_MAX_TREE_DEPTH.
- */
-#ifndef SNMP_MAX_VALUE_SIZE
-#define SNMP_MAX_VALUE_SIZE LWIP_MAX((SNMP_MAX_OCTET_STRING_LEN)+1, sizeof(s32_t)*(SNMP_MAX_TREE_DEPTH))
-#endif
-
-/*
- ----------------------------------
- ---------- IGMP options ----------
- ----------------------------------
-*/
-/**
- * LWIP_IGMP==1: Turn on IGMP module.
- */
-#ifndef LWIP_IGMP
-#define LWIP_IGMP 0
-#endif
-
-#define LWIP_RAND() rand()
-
-/*
- ----------------------------------
- ---------- DNS options -----------
- ----------------------------------
-*/
-/**
- * LWIP_DNS==1: Turn on DNS module. UDP must be available for DNS
- * transport.
- */
-#ifndef LWIP_DNS
-#define LWIP_DNS 1
-#endif
-
-/** DNS maximum number of entries to maintain locally. */
-#ifndef DNS_TABLE_SIZE
-#define DNS_TABLE_SIZE 4
-#endif
-
-/** DNS maximum host name length supported in the name table. */
-#ifndef DNS_MAX_NAME_LENGTH
-#define DNS_MAX_NAME_LENGTH 256
-#endif
-
-/** The maximum of DNS servers
- * The first server can be initialized automatically by defining
- * DNS_SERVER_ADDRESS(ipaddr), where 'ipaddr' is an 'ip_addr_t*'
- */
-#ifndef DNS_SERVER_ADDRESS
-#define DNS_SERVER_ADDRESS(ipaddr) (((ipaddr)->addr) = 134744072)
-#endif
-
-/** The maximum of DNS servers */
-#ifndef DNS_MAX_SERVERS
-#define DNS_MAX_SERVERS 2
-#endif
-
-/** DNS do a name checking between the query and the response. */
-#ifndef DNS_DOES_NAME_CHECK
-#define DNS_DOES_NAME_CHECK 1
-#endif
-
-/** DNS message max. size. Default value is RFC compliant. */
-#ifndef DNS_MSG_SIZE
-#define DNS_MSG_SIZE 512
-#endif
-
-/** DNS_LOCAL_HOSTLIST: Implements a local host-to-address list. If enabled,
- * you have to define
- * #define DNS_LOCAL_HOSTLIST_INIT {{"host1", 0x123}, {"host2", 0x234}}
- * (an array of structs name/address, where address is an u32_t in network
- * byte order).
- *
- * Instead, you can also use an external function:
- * #define DNS_LOOKUP_LOCAL_EXTERN(x) extern u32_t my_lookup_function(const char *name)
- * that returns the IP address or INADDR_NONE if not found.
- */
-#ifndef DNS_LOCAL_HOSTLIST
-#define DNS_LOCAL_HOSTLIST 0
-#endif /* DNS_LOCAL_HOSTLIST */
-
-/** If this is turned on, the local host-list can be dynamically changed
- * at runtime. */
-#ifndef DNS_LOCAL_HOSTLIST_IS_DYNAMIC
-#define DNS_LOCAL_HOSTLIST_IS_DYNAMIC 0
-#endif /* DNS_LOCAL_HOSTLIST_IS_DYNAMIC */
-
-/*
- ---------------------------------
- ---------- UDP options ----------
- ---------------------------------
-*/
-/**
- * LWIP_UDP==1: Turn on UDP.
- */
-#ifndef LWIP_UDP
-#define LWIP_UDP 1
-#endif
-
-/**
- * LWIP_UDPLITE==1: Turn on UDP-Lite. (Requires LWIP_UDP)
- */
-#ifndef LWIP_UDPLITE
-#define LWIP_UDPLITE 0
-#endif
-
-/**
- * UDP_TTL: Default Time-To-Live value.
- */
-#ifndef UDP_TTL
-#define UDP_TTL (IP_DEFAULT_TTL)
-#endif
-
-/**
- * LWIP_NETBUF_RECVINFO==1: append destination addr and port to every netbuf.
- */
-#ifndef LWIP_NETBUF_RECVINFO
-#define LWIP_NETBUF_RECVINFO 0
-#endif
-
-/*
- ---------------------------------
- ---------- TCP options ----------
- ---------------------------------
-*/
-/**
- * LWIP_TCP==1: Turn on TCP.
- */
-#ifndef LWIP_TCP
-#define LWIP_TCP 1
-#endif
-
-/**
- * TCP_TTL: Default Time-To-Live value.
- */
-#ifndef TCP_TTL
-#define TCP_TTL (IP_DEFAULT_TTL)
-#endif
-
-/**
- * TCP_WND: The size of a TCP window. This must be at least
- * (2 * TCP_MSS) for things to work well
- */
-#ifndef TCP_WND
-#define TCP_WND (4 * TCP_MSS)
-#endif
-
-/**
- * TCP_MAXRTX: Maximum number of retransmissions of data segments.
- */
-#ifndef TCP_MAXRTX
-#define TCP_MAXRTX 12
-#endif
-
-/**
- * TCP_SYNMAXRTX: Maximum number of retransmissions of SYN segments.
- */
-#ifndef TCP_SYNMAXRTX
-#define TCP_SYNMAXRTX 6
-#endif
-
-/**
- * TCP_QUEUE_OOSEQ==1: TCP will queue segments that arrive out of order.
- * Define to 0 if your device is low on memory.
- */
-#ifndef TCP_QUEUE_OOSEQ
-#define TCP_QUEUE_OOSEQ (LWIP_TCP)
-#endif
-
-/**
- * TCP_MSS: TCP Maximum segment size. (default is 536, a conservative default,
- * you might want to increase this.)
- * For the receive side, this MSS is advertised to the remote side
- * when opening a connection. For the transmit size, this MSS sets
- * an upper limit on the MSS advertised by the remote host.
- */
-#ifndef TCP_MSS
-#define TCP_MSS 536
-#endif
-
-/**
- * TCP_CALCULATE_EFF_SEND_MSS: "The maximum size of a segment that TCP really
- * sends, the 'effective send MSS,' MUST be the smaller of the send MSS (which
- * reflects the available reassembly buffer size at the remote host) and the
- * largest size permitted by the IP layer" (RFC 1122)
- * Setting this to 1 enables code that checks TCP_MSS against the MTU of the
- * netif used for a connection and limits the MSS if it would be too big otherwise.
- */
-#ifndef TCP_CALCULATE_EFF_SEND_MSS
-#define TCP_CALCULATE_EFF_SEND_MSS 1
-#endif
-
-
-/**
- * TCP_SND_BUF: TCP sender buffer space (bytes).
- * To achieve good performance, this should be at least 2 * TCP_MSS.
- */
-#ifndef TCP_SND_BUF
-#define TCP_SND_BUF (2 * TCP_MSS)
-#endif
-
-/**
- * TCP_SND_QUEUELEN: TCP sender buffer space (pbufs). This must be at least
- * as much as (2 * TCP_SND_BUF/TCP_MSS) for things to work.
- */
-#ifndef TCP_SND_QUEUELEN
-#define TCP_SND_QUEUELEN ((4 * (TCP_SND_BUF) + (TCP_MSS - 1))/(TCP_MSS))
-#endif
-
-/**
- * TCP_SNDLOWAT: TCP writable space (bytes). This must be less than
- * TCP_SND_BUF. It is the amount of space which must be available in the
- * TCP snd_buf for select to return writable (combined with TCP_SNDQUEUELOWAT).
- */
-#ifndef TCP_SNDLOWAT
-#define TCP_SNDLOWAT LWIP_MIN(LWIP_MAX(((TCP_SND_BUF)/2), (2 * TCP_MSS) + 1), (TCP_SND_BUF) - 1)
-#endif
-
-/**
- * TCP_SNDQUEUELOWAT: TCP writable bufs (pbuf count). This must be less
- * than TCP_SND_QUEUELEN. If the number of pbufs queued on a pcb drops below
- * this number, select returns writable (combined with TCP_SNDLOWAT).
- */
-#ifndef TCP_SNDQUEUELOWAT
-#define TCP_SNDQUEUELOWAT LWIP_MAX(((TCP_SND_QUEUELEN)/2), 5)
-#endif
-
-/**
- * TCP_OOSEQ_MAX_BYTES: The maximum number of bytes queued on ooseq per pcb.
- * Default is 0 (no limit). Only valid for TCP_QUEUE_OOSEQ==0.
- */
-#ifndef TCP_OOSEQ_MAX_BYTES
-#define TCP_OOSEQ_MAX_BYTES 0
-#endif
-
-/**
- * TCP_OOSEQ_MAX_PBUFS: The maximum number of pbufs queued on ooseq per pcb.
- * Default is 0 (no limit). Only valid for TCP_QUEUE_OOSEQ==0.
- */
-#ifndef TCP_OOSEQ_MAX_PBUFS
-#define TCP_OOSEQ_MAX_PBUFS 0
-#endif
-
-/**
- * TCP_LISTEN_BACKLOG: Enable the backlog option for tcp listen pcb.
- */
-#ifndef TCP_LISTEN_BACKLOG
-#define TCP_LISTEN_BACKLOG 0
-#endif
-
-/**
- * The maximum allowed backlog for TCP listen netconns.
- * This backlog is used unless another is explicitly specified.
- * 0xff is the maximum (u8_t).
- */
-#ifndef TCP_DEFAULT_LISTEN_BACKLOG
-#define TCP_DEFAULT_LISTEN_BACKLOG 0xff
-#endif
-
-/**
- * TCP_OVERSIZE: The maximum number of bytes that tcp_write may
- * allocate ahead of time in an attempt to create shorter pbuf chains
- * for transmission. The meaningful range is 0 to TCP_MSS. Some
- * suggested values are:
- *
- * 0: Disable oversized allocation. Each tcp_write() allocates a new
- pbuf (old behaviour).
- * 1: Allocate size-aligned pbufs with minimal excess. Use this if your
- * scatter-gather DMA requires aligned fragments.
- * 128: Limit the pbuf/memory overhead to 20%.
- * TCP_MSS: Try to create unfragmented TCP packets.
- * TCP_MSS/4: Try to create 4 fragments or less per TCP packet.
- */
-#ifndef TCP_OVERSIZE
-#define TCP_OVERSIZE TCP_MSS
-#endif
-
-/**
- * LWIP_TCP_TIMESTAMPS==1: support the TCP timestamp option.
- */
-#ifndef LWIP_TCP_TIMESTAMPS
-#define LWIP_TCP_TIMESTAMPS 0
-#endif
-
-/**
- * TCP_WND_UPDATE_THRESHOLD: difference in window to trigger an
- * explicit window update
- */
-#ifndef TCP_WND_UPDATE_THRESHOLD
-#define TCP_WND_UPDATE_THRESHOLD (TCP_WND / 4)
-#endif
-
-/**
- * LWIP_EVENT_API and LWIP_CALLBACK_API: Only one of these should be set to 1.
- * LWIP_EVENT_API==1: The user defines lwip_tcp_event() to receive all
- * events (accept, sent, etc) that happen in the system.
- * LWIP_CALLBACK_API==1: The PCB callback function is called directly
- * for the event. This is the default.
- */
-#if !defined(LWIP_EVENT_API) && !defined(LWIP_CALLBACK_API)
-#define LWIP_EVENT_API 0
-#define LWIP_CALLBACK_API 1
-#endif
-
-
-/*
- ----------------------------------
- ---------- Pbuf options ----------
- ----------------------------------
-*/
-/**
- * PBUF_LINK_HLEN: the number of bytes that should be allocated for a
- * link level header. The default is 14, the standard value for
- * Ethernet.
- */
-#ifndef PBUF_LINK_HLEN
-#define PBUF_LINK_HLEN (14 + ETH_PAD_SIZE)
-#endif
-
-/**
- * PBUF_POOL_BUFSIZE: the size of each pbuf in the pbuf pool. The default is
- * designed to accomodate single full size TCP frame in one pbuf, including
- * TCP_MSS, IP header, and link header.
- */
-#ifndef PBUF_POOL_BUFSIZE
-#define PBUF_POOL_BUFSIZE LWIP_MEM_ALIGN_SIZE(TCP_MSS+40+PBUF_LINK_HLEN)
-#endif
-
-/*
- ------------------------------------------------
- ---------- Network Interfaces options ----------
- ------------------------------------------------
-*/
-/**
- * LWIP_NETIF_HOSTNAME==1: use DHCP_OPTION_HOSTNAME with netif's hostname
- * field.
- */
-#ifndef LWIP_NETIF_HOSTNAME
-#define LWIP_NETIF_HOSTNAME 0
-#endif
-
-/**
- * LWIP_NETIF_API==1: Support netif api (in netifapi.c)
- */
-#ifndef LWIP_NETIF_API
-#define LWIP_NETIF_API 0
-#endif
-
-/**
- * LWIP_NETIF_STATUS_CALLBACK==1: Support a callback function whenever an interface
- * changes its up/down status (i.e., due to DHCP IP acquistion)
- */
-#ifndef LWIP_NETIF_STATUS_CALLBACK
-#define LWIP_NETIF_STATUS_CALLBACK 0
-#endif
-
-/**
- * LWIP_NETIF_LINK_CALLBACK==1: Support a callback function from an interface
- * whenever the link changes (i.e., link down)
- */
-#ifndef LWIP_NETIF_LINK_CALLBACK
-#define LWIP_NETIF_LINK_CALLBACK 0
-#endif
-
-/**
- * LWIP_NETIF_REMOVE_CALLBACK==1: Support a callback function that is called
- * when a netif has been removed
- */
-#ifndef LWIP_NETIF_REMOVE_CALLBACK
-#define LWIP_NETIF_REMOVE_CALLBACK 0
-#endif
-
-/**
- * LWIP_NETIF_HWADDRHINT==1: Cache link-layer-address hints (e.g. table
- * indices) in struct netif. TCP and UDP can make use of this to prevent
- * scanning the ARP table for every sent packet. While this is faster for big
- * ARP tables or many concurrent connections, it might be counterproductive
- * if you have a tiny ARP table or if there never are concurrent connections.
- */
-#ifndef LWIP_NETIF_HWADDRHINT
-#define LWIP_NETIF_HWADDRHINT 0
-#endif
-
-/**
- * LWIP_NETIF_LOOPBACK==1: Support sending packets with a destination IP
- * address equal to the netif IP address, looping them back up the stack.
- */
-#ifndef LWIP_NETIF_LOOPBACK
-#define LWIP_NETIF_LOOPBACK 0
-#endif
-
-/**
- * LWIP_LOOPBACK_MAX_PBUFS: Maximum number of pbufs on queue for loopback
- * sending for each netif (0 = disabled)
- */
-#ifndef LWIP_LOOPBACK_MAX_PBUFS
-#define LWIP_LOOPBACK_MAX_PBUFS 0
-#endif
-
-/**
- * LWIP_NETIF_LOOPBACK_MULTITHREADING: Indicates whether threading is enabled in
- * the system, as netifs must change how they behave depending on this setting
- * for the LWIP_NETIF_LOOPBACK option to work.
- * Setting this is needed to avoid reentering non-reentrant functions like
- * tcp_input().
- * LWIP_NETIF_LOOPBACK_MULTITHREADING==1: Indicates that the user is using a
- * multithreaded environment like tcpip.c. In this case, netif->input()
- * is called directly.
- * LWIP_NETIF_LOOPBACK_MULTITHREADING==0: Indicates a polling (or NO_SYS) setup.
- * The packets are put on a list and netif_poll() must be called in
- * the main application loop.
- */
-#ifndef LWIP_NETIF_LOOPBACK_MULTITHREADING
-#define LWIP_NETIF_LOOPBACK_MULTITHREADING (!NO_SYS)
-#endif
-
-/**
- * LWIP_NETIF_TX_SINGLE_PBUF: if this is set to 1, lwIP tries to put all data
- * to be sent into one single pbuf. This is for compatibility with DMA-enabled
- * MACs that do not support scatter-gather.
- * Beware that this might involve CPU-memcpy before transmitting that would not
- * be needed without this flag! Use this only if you need to!
- *
- * @todo: TCP and IP-frag do not work with this, yet:
- */
-#ifndef LWIP_NETIF_TX_SINGLE_PBUF
-#define LWIP_NETIF_TX_SINGLE_PBUF 0
-#endif /* LWIP_NETIF_TX_SINGLE_PBUF */
-
-/*
- ------------------------------------
- ---------- LOOPIF options ----------
- ------------------------------------
-*/
-/**
- * LWIP_HAVE_LOOPIF==1: Support loop interface (127.0.0.1) and loopif.c
- */
-#ifndef LWIP_HAVE_LOOPIF
-#define LWIP_HAVE_LOOPIF 0
-#endif
-
-/*
- ------------------------------------
- ---------- SLIPIF options ----------
- ------------------------------------
-*/
-/**
- * LWIP_HAVE_SLIPIF==1: Support slip interface and slipif.c
- */
-#ifndef LWIP_HAVE_SLIPIF
-#define LWIP_HAVE_SLIPIF 0
-#endif
-
-/*
- ------------------------------------
- ---------- Thread options ----------
- ------------------------------------
-*/
-/**
- * TCPIP_THREAD_NAME: The name assigned to the main tcpip thread.
- */
-#ifndef TCPIP_THREAD_NAME
-#define TCPIP_THREAD_NAME "tcpip_thread"
-#endif
-
-/**
- * TCPIP_THREAD_STACKSIZE: The stack size used by the main tcpip thread.
- * The stack size value itself is platform-dependent, but is passed to
- * sys_thread_new() when the thread is created.
- */
-#ifndef TCPIP_THREAD_STACKSIZE
-#define TCPIP_THREAD_STACKSIZE 1024
-#endif
-
-/**
- * TCPIP_MBOX_SIZE: The mailbox size for the tcpip thread messages
- * The queue size value itself is platform-dependent, but is passed to
- * sys_mbox_new() when tcpip_init is called.
- */
-#ifndef TCPIP_MBOX_SIZE
-#define TCPIP_MBOX_SIZE MEMP_NUM_PBUF
-#endif
-
-/**
- * SLIPIF_THREAD_NAME: The name assigned to the slipif_loop thread.
- */
-#ifndef SLIPIF_THREAD_NAME
-#define SLIPIF_THREAD_NAME "slipif_loop"
-#endif
-
-/**
- * SLIP_THREAD_STACKSIZE: The stack size used by the slipif_loop thread.
- * The stack size value itself is platform-dependent, but is passed to
- * sys_thread_new() when the thread is created.
- */
-#ifndef SLIPIF_THREAD_STACKSIZE
-#define SLIPIF_THREAD_STACKSIZE 1024
-#endif
-
-/**
- * SLIPIF_THREAD_PRIO: The priority assigned to the slipif_loop thread.
- * The priority value itself is platform-dependent, but is passed to
- * sys_thread_new() when the thread is created.
- */
-#ifndef SLIPIF_THREAD_PRIO
-#define SLIPIF_THREAD_PRIO (LOWPRIO + 1)
-#endif
-
-/**
- * PPP_THREAD_NAME: The name assigned to the pppInputThread.
- */
-#ifndef PPP_THREAD_NAME
-#define PPP_THREAD_NAME "pppInputThread"
-#endif
-
-/**
- * PPP_THREAD_STACKSIZE: The stack size used by the pppInputThread.
- * The stack size value itself is platform-dependent, but is passed to
- * sys_thread_new() when the thread is created.
- */
-#ifndef PPP_THREAD_STACKSIZE
-#define PPP_THREAD_STACKSIZE 1024
-#endif
-
-/**
- * PPP_THREAD_PRIO: The priority assigned to the pppInputThread.
- * The priority value itself is platform-dependent, but is passed to
- * sys_thread_new() when the thread is created.
- */
-#ifndef PPP_THREAD_PRIO
-#define PPP_THREAD_PRIO (LOWPRIO + 1)
-#endif
-
-/**
- * DEFAULT_THREAD_NAME: The name assigned to any other lwIP thread.
- */
-#ifndef DEFAULT_THREAD_NAME
-#define DEFAULT_THREAD_NAME "lwIP"
-#endif
-
-/**
- * DEFAULT_THREAD_STACKSIZE: The stack size used by any other lwIP thread.
- * The stack size value itself is platform-dependent, but is passed to
- * sys_thread_new() when the thread is created.
- */
-#ifndef DEFAULT_THREAD_STACKSIZE
-#define DEFAULT_THREAD_STACKSIZE 4096
-#endif
-
-/**
- * DEFAULT_THREAD_PRIO: The priority assigned to any other lwIP thread.
- * The priority value itself is platform-dependent, but is passed to
- * sys_thread_new() when the thread is created.
- */
-#ifndef DEFAULT_THREAD_PRIO
-#define DEFAULT_THREAD_PRIO (LOWPRIO + 1)
-#endif
-
-/**
- * DEFAULT_RAW_RECVMBOX_SIZE: The mailbox size for the incoming packets on a
- * NETCONN_RAW. The queue size value itself is platform-dependent, but is passed
- * to sys_mbox_new() when the recvmbox is created.
- */
-#ifndef DEFAULT_RAW_RECVMBOX_SIZE
-#define DEFAULT_RAW_RECVMBOX_SIZE 4
-#endif
-
-/**
- * DEFAULT_UDP_RECVMBOX_SIZE: The mailbox size for the incoming packets on a
- * NETCONN_UDP. The queue size value itself is platform-dependent, but is passed
- * to sys_mbox_new() when the recvmbox is created.
- */
-#ifndef DEFAULT_UDP_RECVMBOX_SIZE
-#define DEFAULT_UDP_RECVMBOX_SIZE 4
-#endif
-
-/**
- * DEFAULT_TCP_RECVMBOX_SIZE: The mailbox size for the incoming packets on a
- * NETCONN_TCP. The queue size value itself is platform-dependent, but is passed
- * to sys_mbox_new() when the recvmbox is created.
- */
-#ifndef DEFAULT_TCP_RECVMBOX_SIZE
-#define DEFAULT_TCP_RECVMBOX_SIZE 40
-#endif
-
-/**
- * DEFAULT_ACCEPTMBOX_SIZE: The mailbox size for the incoming connections.
- * The queue size value itself is platform-dependent, but is passed to
- * sys_mbox_new() when the acceptmbox is created.
- */
-#ifndef DEFAULT_ACCEPTMBOX_SIZE
-#define DEFAULT_ACCEPTMBOX_SIZE 4
-#endif
-
-/*
- ----------------------------------------------
- ---------- Sequential layer options ----------
- ----------------------------------------------
-*/
-/**
- * LWIP_TCPIP_CORE_LOCKING: (EXPERIMENTAL!)
- * Don't use it if you're not an active lwIP project member
- */
-#ifndef LWIP_TCPIP_CORE_LOCKING
-#define LWIP_TCPIP_CORE_LOCKING 0
-#endif
-
-/**
- * LWIP_TCPIP_CORE_LOCKING_INPUT: (EXPERIMENTAL!)
- * Don't use it if you're not an active lwIP project member
- */
-#ifndef LWIP_TCPIP_CORE_LOCKING_INPUT
-#define LWIP_TCPIP_CORE_LOCKING_INPUT 0
-#endif
-
-/**
- * LWIP_NETCONN==1: Enable Netconn API (require to use api_lib.c)
- */
-#ifndef LWIP_NETCONN
-#define LWIP_NETCONN 1
-#endif
-
-/** LWIP_TCPIP_TIMEOUT==1: Enable tcpip_timeout/tcpip_untimeout tod create
- * timers running in tcpip_thread from another thread.
- */
-#ifndef LWIP_TCPIP_TIMEOUT
-#define LWIP_TCPIP_TIMEOUT 1
-#endif
-
-/*
- ------------------------------------
- ---------- Socket options ----------
- ------------------------------------
-*/
-/**
- * LWIP_SOCKET==1: Enable Socket API (require to use sockets.c)
- */
-#ifndef LWIP_SOCKET
-#define LWIP_SOCKET 1
-#endif
-
-/**
- * LWIP_COMPAT_SOCKETS==1: Enable BSD-style sockets functions names.
- * (only used if you use sockets.c)
- */
-#ifndef LWIP_COMPAT_SOCKETS
-#define LWIP_COMPAT_SOCKETS 1
-#endif
-
-/**
- * LWIP_POSIX_SOCKETS_IO_NAMES==1: Enable POSIX-style sockets functions names.
- * Disable this option if you use a POSIX operating system that uses the same
- * names (read, write & close). (only used if you use sockets.c)
- */
-#ifndef LWIP_POSIX_SOCKETS_IO_NAMES
-#define LWIP_POSIX_SOCKETS_IO_NAMES 1
-#endif
-
-/**
- * LWIP_TCP_KEEPALIVE==1: Enable TCP_KEEPIDLE, TCP_KEEPINTVL and TCP_KEEPCNT
- * options processing. Note that TCP_KEEPIDLE and TCP_KEEPINTVL have to be set
- * in seconds. (does not require sockets.c, and will affect tcp.c)
- */
-#ifndef LWIP_TCP_KEEPALIVE
-#define LWIP_TCP_KEEPALIVE 0
-#endif
-
-/**
- * LWIP_SO_SNDTIMEO==1: Enable send timeout for sockets/netconns and
- * SO_SNDTIMEO processing.
- */
-#ifndef LWIP_SO_SNDTIMEO
-#define LWIP_SO_SNDTIMEO 0
-#endif
-
-/**
- * LWIP_SO_RCVTIMEO==1: Enable receive timeout for sockets/netconns and
- * SO_RCVTIMEO processing.
- */
-#ifndef LWIP_SO_RCVTIMEO
-#define LWIP_SO_RCVTIMEO 0
-#endif
-
-/**
- * LWIP_SO_RCVBUF==1: Enable SO_RCVBUF processing.
- */
-#ifndef LWIP_SO_RCVBUF
-#define LWIP_SO_RCVBUF 0
-#endif
-
-/**
- * If LWIP_SO_RCVBUF is used, this is the default value for recv_bufsize.
- */
-#ifndef RECV_BUFSIZE_DEFAULT
-#define RECV_BUFSIZE_DEFAULT INT_MAX
-#endif
-
-/**
- * SO_REUSE==1: Enable SO_REUSEADDR option.
- */
-#ifndef SO_REUSE
-#define SO_REUSE 0
-#endif
-
-/**
- * SO_REUSE_RXTOALL==1: Pass a copy of incoming broadcast/multicast packets
- * to all local matches if SO_REUSEADDR is turned on.
- * WARNING: Adds a memcpy for every packet if passing to more than one pcb!
- */
-#ifndef SO_REUSE_RXTOALL
-#define SO_REUSE_RXTOALL 0
-#endif
-
-/*
- ----------------------------------------
- ---------- Statistics options ----------
- ----------------------------------------
-*/
-/**
- * LWIP_STATS==1: Enable statistics collection in lwip_stats.
- */
-#ifndef LWIP_STATS
-#define LWIP_STATS 1
-#endif
-
-#if LWIP_STATS
-
-/**
- * LWIP_STATS_DISPLAY==1: Compile in the statistics output functions.
- */
-#ifndef LWIP_STATS_DISPLAY
-#define LWIP_STATS_DISPLAY 0
-#endif
-
-/**
- * LINK_STATS==1: Enable link stats.
- */
-#ifndef LINK_STATS
-#define LINK_STATS 1
-#endif
-
-/**
- * ETHARP_STATS==1: Enable etharp stats.
- */
-#ifndef ETHARP_STATS
-#define ETHARP_STATS (LWIP_ARP)
-#endif
-
-/**
- * IP_STATS==1: Enable IP stats.
- */
-#ifndef IP_STATS
-#define IP_STATS 1
-#endif
-
-/**
- * IPFRAG_STATS==1: Enable IP fragmentation stats. Default is
- * on if using either frag or reass.
- */
-#ifndef IPFRAG_STATS
-#define IPFRAG_STATS (IP_REASSEMBLY || IP_FRAG)
-#endif
-
-/**
- * ICMP_STATS==1: Enable ICMP stats.
- */
-#ifndef ICMP_STATS
-#define ICMP_STATS 1
-#endif
-
-/**
- * IGMP_STATS==1: Enable IGMP stats.
- */
-#ifndef IGMP_STATS
-#define IGMP_STATS (LWIP_IGMP)
-#endif
-
-/**
- * UDP_STATS==1: Enable UDP stats. Default is on if
- * UDP enabled, otherwise off.
- */
-#ifndef UDP_STATS
-#define UDP_STATS (LWIP_UDP)
-#endif
-
-/**
- * TCP_STATS==1: Enable TCP stats. Default is on if TCP
- * enabled, otherwise off.
- */
-#ifndef TCP_STATS
-#define TCP_STATS (LWIP_TCP)
-#endif
-
-/**
- * MEM_STATS==1: Enable mem.c stats.
- */
-#ifndef MEM_STATS
-#define MEM_STATS ((MEM_LIBC_MALLOC == 0) && (MEM_USE_POOLS == 0))
-#endif
-
-/**
- * MEMP_STATS==1: Enable memp.c pool stats.
- */
-#ifndef MEMP_STATS
-#define MEMP_STATS (MEMP_MEM_MALLOC == 0)
-#endif
-
-/**
- * SYS_STATS==1: Enable system stats (sem and mbox counts, etc).
- */
-#ifndef SYS_STATS
-#define SYS_STATS (NO_SYS == 0)
-#endif
-
-#else
-
-#define LINK_STATS 0
-#define IP_STATS 0
-#define IPFRAG_STATS 0
-#define ICMP_STATS 0
-#define IGMP_STATS 0
-#define UDP_STATS 0
-#define TCP_STATS 0
-#define MEM_STATS 0
-#define MEMP_STATS 0
-#define SYS_STATS 0
-#define LWIP_STATS_DISPLAY 0
-
-#endif /* LWIP_STATS */
-
-/*
- ---------------------------------
- ---------- PPP options ----------
- ---------------------------------
-*/
-/**
- * PPP_SUPPORT==1: Enable PPP.
- */
-#ifndef PPP_SUPPORT
-#define PPP_SUPPORT 0
-#endif
-
-/**
- * PPPOE_SUPPORT==1: Enable PPP Over Ethernet
- */
-#ifndef PPPOE_SUPPORT
-#define PPPOE_SUPPORT 0
-#endif
-
-/**
- * PPPOS_SUPPORT==1: Enable PPP Over Serial
- */
-#ifndef PPPOS_SUPPORT
-#define PPPOS_SUPPORT PPP_SUPPORT
-#endif
-
-#if PPP_SUPPORT
-
-/**
- * NUM_PPP: Max PPP sessions.
- */
-#ifndef NUM_PPP
-#define NUM_PPP 1
-#endif
-
-/**
- * PAP_SUPPORT==1: Support PAP.
- */
-#ifndef PAP_SUPPORT
-#define PAP_SUPPORT 0
-#endif
-
-/**
- * CHAP_SUPPORT==1: Support CHAP.
- */
-#ifndef CHAP_SUPPORT
-#define CHAP_SUPPORT 0
-#endif
-
-/**
- * MSCHAP_SUPPORT==1: Support MSCHAP. CURRENTLY NOT SUPPORTED! DO NOT SET!
- */
-#ifndef MSCHAP_SUPPORT
-#define MSCHAP_SUPPORT 0
-#endif
-
-/**
- * CBCP_SUPPORT==1: Support CBCP. CURRENTLY NOT SUPPORTED! DO NOT SET!
- */
-#ifndef CBCP_SUPPORT
-#define CBCP_SUPPORT 0
-#endif
-
-/**
- * CCP_SUPPORT==1: Support CCP. CURRENTLY NOT SUPPORTED! DO NOT SET!
- */
-#ifndef CCP_SUPPORT
-#define CCP_SUPPORT 0
-#endif
-
-/**
- * VJ_SUPPORT==1: Support VJ header compression.
- */
-#ifndef VJ_SUPPORT
-#define VJ_SUPPORT 0
-#endif
-
-/**
- * MD5_SUPPORT==1: Support MD5 (see also CHAP).
- */
-#ifndef MD5_SUPPORT
-#define MD5_SUPPORT 0
-#endif
-
-/*
- * Timeouts
- */
-#ifndef FSM_DEFTIMEOUT
-#define FSM_DEFTIMEOUT 6 /* Timeout time in seconds */
-#endif
-
-#ifndef FSM_DEFMAXTERMREQS
-#define FSM_DEFMAXTERMREQS 2 /* Maximum Terminate-Request transmissions */
-#endif
-
-#ifndef FSM_DEFMAXCONFREQS
-#define FSM_DEFMAXCONFREQS 10 /* Maximum Configure-Request transmissions */
-#endif
-
-#ifndef FSM_DEFMAXNAKLOOPS
-#define FSM_DEFMAXNAKLOOPS 5 /* Maximum number of nak loops */
-#endif
-
-#ifndef UPAP_DEFTIMEOUT
-#define UPAP_DEFTIMEOUT 6 /* Timeout (seconds) for retransmitting req */
-#endif
-
-#ifndef UPAP_DEFREQTIME
-#define UPAP_DEFREQTIME 30 /* Time to wait for auth-req from peer */
-#endif
-
-#ifndef CHAP_DEFTIMEOUT
-#define CHAP_DEFTIMEOUT 6 /* Timeout time in seconds */
-#endif
-
-#ifndef CHAP_DEFTRANSMITS
-#define CHAP_DEFTRANSMITS 10 /* max # times to send challenge */
-#endif
-
-/* Interval in seconds between keepalive echo requests, 0 to disable. */
-#ifndef LCP_ECHOINTERVAL
-#define LCP_ECHOINTERVAL 0
-#endif
-
-/* Number of unanswered echo requests before failure. */
-#ifndef LCP_MAXECHOFAILS
-#define LCP_MAXECHOFAILS 3
-#endif
-
-/* Max Xmit idle time (in jiffies) before resend flag char. */
-#ifndef PPP_MAXIDLEFLAG
-#define PPP_MAXIDLEFLAG 100
-#endif
-
-/*
- * Packet sizes
- *
- * Note - lcp shouldn't be allowed to negotiate stuff outside these
- * limits. See lcp.h in the pppd directory.
- * (XXX - these constants should simply be shared by lcp.c instead
- * of living in lcp.h)
- */
-#define PPP_MTU 1500 /* Default MTU (size of Info field) */
-#ifndef PPP_MAXMTU
-/* #define PPP_MAXMTU 65535 - (PPP_HDRLEN + PPP_FCSLEN) */
-#define PPP_MAXMTU 1500 /* Largest MTU we allow */
-#endif
-#define PPP_MINMTU 64
-#define PPP_MRU 1500 /* default MRU = max length of info field */
-#define PPP_MAXMRU 1500 /* Largest MRU we allow */
-#ifndef PPP_DEFMRU
-#define PPP_DEFMRU 296 /* Try for this */
-#endif
-#define PPP_MINMRU 128 /* No MRUs below this */
-
-#ifndef MAXNAMELEN
-#define MAXNAMELEN 256 /* max length of hostname or name for auth */
-#endif
-#ifndef MAXSECRETLEN
-#define MAXSECRETLEN 256 /* max length of password or secret */
-#endif
-
-#endif /* PPP_SUPPORT */
-
-/*
- --------------------------------------
- ---------- Checksum options ----------
- --------------------------------------
-*/
-/**
- * CHECKSUM_GEN_IP==1: Generate checksums in software for outgoing IP packets.
- */
-#ifndef CHECKSUM_GEN_IP
-#define CHECKSUM_GEN_IP 0
-#endif
-
-/**
- * CHECKSUM_GEN_UDP==1: Generate checksums in software for outgoing UDP packets.
- */
-#ifndef CHECKSUM_GEN_UDP
-#define CHECKSUM_GEN_UDP 0
-#endif
-
-/**
- * CHECKSUM_GEN_TCP==1: Generate checksums in software for outgoing TCP packets.
- */
-#ifndef CHECKSUM_GEN_TCP
-#define CHECKSUM_GEN_TCP 0
-#endif
-
-/**
- * CHECKSUM_GEN_ICMP==1: Generate checksums in software for outgoing ICMP packets.
- */
-#ifndef CHECKSUM_GEN_ICMP
-#define CHECKSUM_GEN_ICMP 1
-#endif
-
-/**
- * CHECKSUM_CHECK_IP==1: Check checksums in software for incoming IP packets.
- */
-#ifndef CHECKSUM_CHECK_IP
-#define CHECKSUM_CHECK_IP 0
-#endif
-
-/**
- * CHECKSUM_CHECK_UDP==1: Check checksums in software for incoming UDP packets.
- */
-#ifndef CHECKSUM_CHECK_UDP
-#define CHECKSUM_CHECK_UDP 0
-#endif
-
-/**
- * CHECKSUM_CHECK_TCP==1: Check checksums in software for incoming TCP packets.
- */
-#ifndef CHECKSUM_CHECK_TCP
-#define CHECKSUM_CHECK_TCP 0
-#endif
-
-/**
- * LWIP_CHECKSUM_ON_COPY==1: Calculate checksum when copying data from
- * application buffers to pbufs.
- */
-#ifndef LWIP_CHECKSUM_ON_COPY
-#define LWIP_CHECKSUM_ON_COPY 0
-#endif
-
-/*
- ---------------------------------------
- ---------- Hook options ---------------
- ---------------------------------------
-*/
-
-/* Hooks are undefined by default, define them to a function if you need them. */
-
-/**
- * LWIP_HOOK_IP4_INPUT(pbuf, input_netif):
- * - called from ip_input() (IPv4)
- * - pbuf: received struct pbuf passed to ip_input()
- * - input_netif: struct netif on which the packet has been received
- * Return values:
- * - 0: Hook has not consumed the packet, packet is processed as normal
- * - != 0: Hook has consumed the packet.
- * If the hook consumed the packet, 'pbuf' is in the responsibility of the hook
- * (i.e. free it when done).
- */
-
-/**
- * LWIP_HOOK_IP4_ROUTE(dest):
- * - called from ip_route() (IPv4)
- * - dest: destination IPv4 address
- * Returns the destination netif or NULL if no destination netif is found. In
- * that case, ip_route() continues as normal.
- */
-
-/*
- ---------------------------------------
- ---------- Debugging options ----------
- ---------------------------------------
-*/
-/**
- * LWIP_DBG_MIN_LEVEL: After masking, the value of the debug is
- * compared against this value. If it is smaller, then debugging
- * messages are written.
- */
-#ifndef LWIP_DBG_MIN_LEVEL
-#define LWIP_DBG_MIN_LEVEL LWIP_DBG_LEVEL_ALL
-#endif
-
-/**
- * LWIP_DBG_TYPES_ON: A mask that can be used to globally enable/disable
- * debug messages of certain types.
- */
-#ifndef LWIP_DBG_TYPES_ON
-#define LWIP_DBG_TYPES_ON LWIP_DBG_OFF
-#endif
-
-/**
- * ETHARP_DEBUG: Enable debugging in etharp.c.
- */
-#ifndef ETHARP_DEBUG
-#define ETHARP_DEBUG LWIP_DBG_OFF
-#endif
-
-/**
- * NETIF_DEBUG: Enable debugging in netif.c.
- */
-#ifndef NETIF_DEBUG
-#define NETIF_DEBUG LWIP_DBG_OFF
-#endif
-
-/**
- * PBUF_DEBUG: Enable debugging in pbuf.c.
- */
-#ifndef PBUF_DEBUG
-#define PBUF_DEBUG LWIP_DBG_OFF
-#endif
-
-/**
- * API_LIB_DEBUG: Enable debugging in api_lib.c.
- */
-#ifndef API_LIB_DEBUG
-#define API_LIB_DEBUG LWIP_DBG_OFF
-#endif
-
-/**
- * API_MSG_DEBUG: Enable debugging in api_msg.c.
- */
-#ifndef API_MSG_DEBUG
-#define API_MSG_DEBUG LWIP_DBG_OFF
-#endif
-
-/**
- * SOCKETS_DEBUG: Enable debugging in sockets.c.
- */
-#ifndef SOCKETS_DEBUG
-#define SOCKETS_DEBUG LWIP_DBG_OFF
-#endif
-
-/**
- * ICMP_DEBUG: Enable debugging in icmp.c.
- */
-#ifndef ICMP_DEBUG
-#define ICMP_DEBUG LWIP_DBG_OFF
-#endif
-
-/**
- * IGMP_DEBUG: Enable debugging in igmp.c.
- */
-#ifndef IGMP_DEBUG
-#define IGMP_DEBUG LWIP_DBG_OFF
-#endif
-
-/**
- * INET_DEBUG: Enable debugging in inet.c.
- */
-#ifndef INET_DEBUG
-#define INET_DEBUG LWIP_DBG_OFF
-#endif
-
-/**
- * IP_DEBUG: Enable debugging for IP.
- */
-#ifndef IP_DEBUG
-#define IP_DEBUG LWIP_DBG_OFF
-#endif
-
-/**
- * IP_REASS_DEBUG: Enable debugging in ip_frag.c for both frag & reass.
- */
-#ifndef IP_REASS_DEBUG
-#define IP_REASS_DEBUG LWIP_DBG_OFF
-#endif
-
-/**
- * RAW_DEBUG: Enable debugging in raw.c.
- */
-#ifndef RAW_DEBUG
-#define RAW_DEBUG LWIP_DBG_OFF
-#endif
-
-/**
- * MEM_DEBUG: Enable debugging in mem.c.
- */
-#ifndef MEM_DEBUG
-#define MEM_DEBUG LWIP_DBG_OFF
-#endif
-
-/**
- * MEMP_DEBUG: Enable debugging in memp.c.
- */
-#ifndef MEMP_DEBUG
-#define MEMP_DEBUG LWIP_DBG_OFF
-#endif
-
-/**
- * SYS_DEBUG: Enable debugging in sys.c.
- */
-#ifndef SYS_DEBUG
-#define SYS_DEBUG LWIP_DBG_OFF
-#endif
-
-/**
- * TIMERS_DEBUG: Enable debugging in timers.c.
- */
-#ifndef TIMERS_DEBUG
-#define TIMERS_DEBUG LWIP_DBG_OFF
-#endif
-
-/**
- * TCP_DEBUG: Enable debugging for TCP.
- */
-#ifndef TCP_DEBUG
-#define TCP_DEBUG LWIP_DBG_OFF
-#endif
-
-/**
- * TCP_INPUT_DEBUG: Enable debugging in tcp_in.c for incoming debug.
- */
-#ifndef TCP_INPUT_DEBUG
-#define TCP_INPUT_DEBUG LWIP_DBG_OFF
-#endif
-
-/**
- * TCP_FR_DEBUG: Enable debugging in tcp_in.c for fast retransmit.
- */
-#ifndef TCP_FR_DEBUG
-#define TCP_FR_DEBUG LWIP_DBG_OFF
-#endif
-
-/**
- * TCP_RTO_DEBUG: Enable debugging in TCP for retransmit
- * timeout.
- */
-#ifndef TCP_RTO_DEBUG
-#define TCP_RTO_DEBUG LWIP_DBG_OFF
-#endif
-
-/**
- * TCP_CWND_DEBUG: Enable debugging for TCP congestion window.
- */
-#ifndef TCP_CWND_DEBUG
-#define TCP_CWND_DEBUG LWIP_DBG_OFF
-#endif
-
-/**
- * TCP_WND_DEBUG: Enable debugging in tcp_in.c for window updating.
- */
-#ifndef TCP_WND_DEBUG
-#define TCP_WND_DEBUG LWIP_DBG_OFF
-#endif
-
-/**
- * TCP_OUTPUT_DEBUG: Enable debugging in tcp_out.c output functions.
- */
-#ifndef TCP_OUTPUT_DEBUG
-#define TCP_OUTPUT_DEBUG LWIP_DBG_OFF
-#endif
-
-/**
- * TCP_RST_DEBUG: Enable debugging for TCP with the RST message.
- */
-#ifndef TCP_RST_DEBUG
-#define TCP_RST_DEBUG LWIP_DBG_OFF
-#endif
-
-/**
- * TCP_QLEN_DEBUG: Enable debugging for TCP queue lengths.
- */
-#ifndef TCP_QLEN_DEBUG
-#define TCP_QLEN_DEBUG LWIP_DBG_OFF
-#endif
-
-/**
- * UDP_DEBUG: Enable debugging in UDP.
- */
-#ifndef UDP_DEBUG
-#define UDP_DEBUG LWIP_DBG_OFF
-#endif
-
-/**
- * TCPIP_DEBUG: Enable debugging in tcpip.c.
- */
-#ifndef TCPIP_DEBUG
-#define TCPIP_DEBUG LWIP_DBG_OFF
-#endif
-
-/**
- * PPP_DEBUG: Enable debugging for PPP.
- */
-#ifndef PPP_DEBUG
-#define PPP_DEBUG LWIP_DBG_OFF
-#endif
-
-/**
- * SLIP_DEBUG: Enable debugging in slipif.c.
- */
-#ifndef SLIP_DEBUG
-#define SLIP_DEBUG LWIP_DBG_OFF
-#endif
-
-/**
- * DHCP_DEBUG: Enable debugging in dhcp.c.
- */
-#ifndef DHCP_DEBUG
-#define DHCP_DEBUG LWIP_DBG_OFF
-#endif
-
-/**
- * AUTOIP_DEBUG: Enable debugging in autoip.c.
- */
-#ifndef AUTOIP_DEBUG
-#define AUTOIP_DEBUG LWIP_DBG_OFF
-#endif
-
-/**
- * SNMP_MSG_DEBUG: Enable debugging for SNMP messages.
- */
-#ifndef SNMP_MSG_DEBUG
-#define SNMP_MSG_DEBUG LWIP_DBG_OFF
-#endif
-
-/**
- * SNMP_MIB_DEBUG: Enable debugging for SNMP MIBs.
- */
-#ifndef SNMP_MIB_DEBUG
-#define SNMP_MIB_DEBUG LWIP_DBG_OFF
-#endif
-
-/**
- * DNS_DEBUG: Enable debugging for DNS.
- */
-#ifndef DNS_DEBUG
-#define DNS_DEBUG LWIP_DBG_OFF
-#endif
-
-/* Use ChibiOS specific priorities. */
-#if !defined(TCPIP_THREAD_PRIO)
-#define TCPIP_THREAD_PRIO (LOWPRIO + 1)
-#endif
-#if !defined(LWIP_THREAD_PRIORITY)
-#define LWIP_THREAD_PRIORITY (LOWPRIO)
-#endif
-
-#endif /* LWIP_HDR_LWIPOPTS_H__ */
diff --git a/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-HTTPS-NSEC/lwipthread.c b/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-HTTPS-NSEC/lwipthread.c deleted file mode 100644 index c431d0703..000000000 --- a/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-HTTPS-NSEC/lwipthread.c +++ /dev/null @@ -1,428 +0,0 @@ -/*
- ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-/*
- * **** This file incorporates work covered by the following copyright and ****
- * **** permission notice: ****
- *
- * Copyright (c) 2001-2004 Swedish Institute of Computer Science.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
- * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
- * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * This file is part of the lwIP TCP/IP stack.
- *
- * Author: Adam Dunkels <adam@sics.se>
- *
- */
-
-/**
- * @file lwipthread.c
- * @brief LWIP wrapper thread code.
- * @addtogroup LWIP_THREAD
- * @{
- */
-
-#include "lwipthread.h"
-
-#include "hal.h"
-#include "evtimer.h"
-
-#include <lwip/opt.h>
-#include <lwip/def.h>
-#include <lwip/mem.h>
-#include <lwip/pbuf.h>
-#include <lwip/sys.h>
-#include <lwip/stats.h>
-#include <lwip/snmp.h>
-#include <lwip/tcpip.h>
-#include <netif/etharp.h>
-#include <lwip/netifapi.h>
-
-#if LWIP_DHCP
-#include <lwip/dhcp.h>
-#endif
-
-#if LWIP_AUTOIP
-#include <lwip/autoip.h>
-#endif
-
-#define PERIODIC_TIMER_ID 1
-#define FRAME_RECEIVED_ID 2
-
-/*
- * Suspension point for initialization procedure.
- */
-thread_reference_t lwip_trp = NULL;
-
-/*
- * Stack area for the LWIP-MAC thread.
- */
-static THD_WORKING_AREA(wa_lwip_thread, LWIP_THREAD_STACK_SIZE);
-
-/*
- * Initialization.
- */
-static void low_level_init(struct netif *netif) {
- /* set MAC hardware address length */
- netif->hwaddr_len = ETHARP_HWADDR_LEN;
-
- /* maximum transfer unit */
- netif->mtu = LWIP_NETIF_MTU;
-
- /* device capabilities */
- /* don't set NETIF_FLAG_ETHARP if this device is not an Ethernet one */
- netif->flags = NETIF_FLAG_BROADCAST | NETIF_FLAG_ETHARP | NETIF_FLAG_LINK_UP;
-
- /* Do whatever else is needed to initialize interface. */
-}
-
-/*
- * This function does the actual transmission of the packet. The packet is
- * contained in the pbuf that is passed to the function. This pbuf
- * might be chained.
- *
- * @param netif the lwip network interface structure for this ethernetif
- * @param p the MAC packet to send (e.g. IP packet including MAC addresses and type)
- * @return ERR_OK if the packet could be sent
- * an err_t value if the packet couldn't be sent
- *
- * @note Returning ERR_MEM here if a DMA queue of your MAC is full can lead to
- * strange results. You might consider waiting for space in the DMA queue
- * to become available since the stack doesn't retry to send a packet
- * dropped because of memory failure (except for the TCP timers).
- */
-static err_t low_level_output(struct netif *netif, struct pbuf *p) {
- struct pbuf *q;
- MACTransmitDescriptor td;
-
- (void)netif;
- if (macWaitTransmitDescriptor(ÐD0, &td, TIME_MS2I(LWIP_SEND_TIMEOUT)) != MSG_OK)
- return ERR_TIMEOUT;
-
-#if ETH_PAD_SIZE
- pbuf_header(p, -ETH_PAD_SIZE); /* drop the padding word */
-#endif
-
- /* Iterates through the pbuf chain. */
- for(q = p; q != NULL; q = q->next)
- macWriteTransmitDescriptor(&td, (uint8_t *)q->payload, (size_t)q->len);
- macReleaseTransmitDescriptor(&td);
-
- MIB2_STATS_NETIF_ADD(netif, ifoutoctets, p->tot_len);
- if (((u8_t*)p->payload)[0] & 1) {
- /* broadcast or multicast packet*/
- MIB2_STATS_NETIF_INC(netif, ifoutnucastpkts);
- }
- else {
- /* unicast packet */
- MIB2_STATS_NETIF_INC(netif, ifoutucastpkts);
- }
- /* increase ifoutdiscards or ifouterrors on error */
-
-#if ETH_PAD_SIZE
- pbuf_header(p, ETH_PAD_SIZE); /* reclaim the padding word */
-#endif
-
- LINK_STATS_INC(link.xmit);
-
- return ERR_OK;
-}
-
-/*
- * Receives a frame.
- * Allocates a pbuf and transfers the bytes of the incoming
- * packet from the interface into the pbuf.
- *
- * @param netif the lwip network interface structure for this ethernetif
- * @return a pbuf filled with the received packet (including MAC header)
- * NULL on memory error
- */
-static bool low_level_input(struct netif *netif, struct pbuf **pbuf) {
- MACReceiveDescriptor rd;
- struct pbuf *q;
- u16_t len;
-
- (void)netif;
-
- osalDbgAssert(pbuf != NULL, "invalid null pointer");
-
- if (macWaitReceiveDescriptor(ÐD0, &rd, TIME_IMMEDIATE) != MSG_OK)
- return false;
-
- len = (u16_t)rd.size;
-
-#if ETH_PAD_SIZE
- len += ETH_PAD_SIZE; /* allow room for Ethernet padding */
-#endif
-
- /* We allocate a pbuf chain of pbufs from the pool. */
- *pbuf = pbuf_alloc(PBUF_RAW, len, PBUF_POOL);
-
- if (*pbuf != NULL) {
-#if ETH_PAD_SIZE
- pbuf_header(pbuf, -ETH_PAD_SIZE); /* drop the padding word */
-#endif
-
- /* Iterates through the pbuf chain. */
- for(q = *pbuf; q != NULL; q = q->next)
- macReadReceiveDescriptor(&rd, (uint8_t *)q->payload, (size_t)q->len);
- macReleaseReceiveDescriptor(&rd);
-
- MIB2_STATS_NETIF_ADD(netif, ifinoctets, *pbuf->tot_len);
-
- if (*(uint8_t *)((*pbuf)->payload) & 1) {
- /* broadcast or multicast packet*/
- MIB2_STATS_NETIF_INC(netif, ifinnucastpkts);
- }
- else {
- /* unicast packet*/
- MIB2_STATS_NETIF_INC(netif, ifinucastpkts);
- }
-
-#if ETH_PAD_SIZE
- pbuf_header(pbuf, ETH_PAD_SIZE); /* reclaim the padding word */
-#endif
-
- LINK_STATS_INC(link.recv);
- }
- else {
- macReleaseReceiveDescriptor(&rd); // Drop packet
- LINK_STATS_INC(link.memerr);
- LINK_STATS_INC(link.drop);
- MIB2_STATS_NETIF_INC(netif, ifindiscards);
- }
-
- return true;
-}
-
-/*
- * Called at the beginning of the program to set up the
- * network interface. It calls the function low_level_init() to do the
- * actual setup of the hardware.
- *
- * This function should be passed as a parameter to netifapi_netif_add().
- *
- * @param netif the lwip network interface structure for this ethernetif
- * @return ERR_OK if the loopif is initialised
- * ERR_MEM if private data couldn't be allocated
- * any other err_t on error
- */
-static err_t ethernetif_init(struct netif *netif) {
- osalDbgAssert((netif != NULL), "netif != NULL");
-
- /*
- * Initialize the snmp variables and counters inside the struct netif.
- * The last argument should be replaced with your link speed, in units
- * of bits per second.
- */
- MIB2_INIT_NETIF(netif, snmp_ifType_ethernet_csmacd, LWIP_LINK_SPEED);
-
- netif->state = NULL;
- netif->name[0] = LWIP_IFNAME0;
- netif->name[1] = LWIP_IFNAME1;
- /* We directly use etharp_output() here to save a function call.
- * You can instead declare your own function an call etharp_output()
- * from it if you have to do some checks before sending (e.g. if link
- * is available...) */
- netif->output = etharp_output;
- netif->linkoutput = low_level_output;
-
- /* initialize the hardware */
- low_level_init(netif);
-
- return ERR_OK;
-}
-
-/**
- * @brief LWIP handling thread.
- *
- * @param[in] p pointer to a @p lwipthread_opts structure or @p NULL
- * @return The function does not return.
- */
-static THD_FUNCTION(lwip_thread, p) {
- event_timer_t evt;
- event_listener_t el0, el1;
- ip_addr_t ip, gateway, netmask;
- static struct netif thisif = { 0 };
- static const MACConfig mac_config = {thisif.hwaddr};
- net_addr_mode_t addressMode;
- err_t result;
-
- chRegSetThreadName(LWIP_THREAD_NAME);
-
- /* Initializes the thing.*/
- tcpip_init(NULL, NULL);
-
- /* TCP/IP parameters, runtime or compile time.*/
- if (p) {
- struct lwipthread_opts *opts = p;
- unsigned i;
-
- for (i = 0; i < 6; i++)
- thisif.hwaddr[i] = opts->macaddress[i];
- ip.addr = opts->address;
- gateway.addr = opts->gateway;
- netmask.addr = opts->netmask;
- addressMode = opts->addrMode;
-#if LWIP_NETIF_HOSTNAME
- thisif.hostname = opts->ourHostName;
-#endif
- }
- else {
- thisif.hwaddr[0] = LWIP_ETHADDR_0;
- thisif.hwaddr[1] = LWIP_ETHADDR_1;
- thisif.hwaddr[2] = LWIP_ETHADDR_2;
- thisif.hwaddr[3] = LWIP_ETHADDR_3;
- thisif.hwaddr[4] = LWIP_ETHADDR_4;
- thisif.hwaddr[5] = LWIP_ETHADDR_5;
- LWIP_IPADDR(&ip);
- LWIP_GATEWAY(&gateway);
- LWIP_NETMASK(&netmask);
- addressMode = NET_ADDRESS_STATIC;
-#if LWIP_NETIF_HOSTNAME
- thisif.hostname = NULL;
-#endif
- }
-
-#if LWIP_NETIF_HOSTNAME
- if (thisif.hostname == NULL)
- thisif.hostname = LWIP_NETIF_HOSTNAME_STRING;
-#endif
-
- macStart(ÐD0, &mac_config);
-
- /* Add interface. */
- result = netifapi_netif_add(&thisif, &ip, &netmask, &gateway, NULL, ethernetif_init, tcpip_input);
- if (result != ERR_OK)
- {
- chThdSleepMilliseconds(1000); // Give some time to print any other diagnostics.
- osalSysHalt("netif_add error"); // Not sure what else we can do if an error occurs here.
- };
-
- netif_set_default(&thisif);
-
- switch (addressMode)
- {
-#if LWIP_AUTOIP
- case NET_ADDRESS_AUTO:
- autoip_start(&thisif);
- break;
-#endif
-
- default:
- netif_set_up(&thisif);
- break;
- }
-
- /* Setup event sources.*/
- evtObjectInit(&evt, LWIP_LINK_POLL_INTERVAL);
- evtStart(&evt);
- chEvtRegisterMask(&evt.et_es, &el0, PERIODIC_TIMER_ID);
- chEvtRegisterMask(macGetReceiveEventSource(ÐD0), &el1, FRAME_RECEIVED_ID);
- chEvtAddEvents(PERIODIC_TIMER_ID | FRAME_RECEIVED_ID);
-
- /* Resumes the caller and goes to the final priority.*/
- chThdResume(&lwip_trp, MSG_OK);
- chThdSetPriority(LWIP_THREAD_PRIORITY);
-
- while (true) {
- eventmask_t mask = chEvtWaitAny(ALL_EVENTS);
- if (mask & PERIODIC_TIMER_ID) {
- bool current_link_status = macPollLinkStatus(ÐD0);
- if (current_link_status != netif_is_link_up(&thisif)) {
- if (current_link_status) {
- tcpip_callback_with_block((tcpip_callback_fn) netif_set_link_up,
- &thisif, 0);
-#if LWIP_DHCP
- if (addressMode == NET_ADDRESS_DHCP)
- dhcp_start(&thisif);
-#endif
- }
- else {
- tcpip_callback_with_block((tcpip_callback_fn) netif_set_link_down,
- &thisif, 0);
-#if LWIP_DHCP
- if (addressMode == NET_ADDRESS_DHCP)
- dhcp_stop(&thisif);
-#endif
- }
- }
- }
-
- if (mask & FRAME_RECEIVED_ID) {
- struct pbuf *p;
- while (low_level_input(&thisif, &p)) {
- if (p != NULL) {
- struct eth_hdr *ethhdr = p->payload;
- switch (htons(ethhdr->type)) {
- /* IP or ARP packet? */
- case ETHTYPE_IP:
- case ETHTYPE_ARP:
- /* full packet send to tcpip_thread to process */
- if (thisif.input(p, &thisif) == ERR_OK)
- break;
- LWIP_DEBUGF(NETIF_DEBUG, ("ethernetif_input: IP input error\n"));
- /* Falls through */
- default:
- pbuf_free(p);
- }
- }
- }
- }
- }
-}
-
-/**
- * @brief Initializes the lwIP subsystem.
- * @note The function exits after the initialization is finished.
- *
- * @param[in] opts pointer to the configuration structure, if @p NULL
- * then the static configuration is used.
- */
-void lwipInit(const lwipthread_opts_t *opts) {
- /* Creating the lwIP thread (it changes priority internally).*/
- chThdCreateStatic(wa_lwip_thread, sizeof (wa_lwip_thread),
- chThdGetPriorityX() - 1, lwip_thread, (void *)opts);
-
- /* Waiting for the lwIP thread complete initialization. Note,
- this thread reaches the thread reference object first because
- the relative priorities.*/
- chSysLock();
- chThdSuspendS(&lwip_trp);
- chSysUnlock();
-}
-
-/** @} */
diff --git a/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-HTTPS-NSEC/lwipthread.h b/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-HTTPS-NSEC/lwipthread.h deleted file mode 100644 index 42632dcbe..000000000 --- a/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-HTTPS-NSEC/lwipthread.h +++ /dev/null @@ -1,247 +0,0 @@ -/*
- ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file lwipthread.h
- * @brief LWIP wrapper thread macros and structures.
- * @addtogroup LWIP_THREAD
- * @{
- */
-
-#ifndef LWIPTHREAD_H
-#define LWIPTHREAD_H
-
-#include <lwip/opt.h>
-
-/**
- * @brief lwIP default network interface maximum transmission unit (MTU).
- */
-#if !defined(LWIP_NETIF_MTU) || defined(__DOXYGEN__)
-#define LWIP_NETIF_MTU 1500
-#endif
-
-/**
- * @brief Default network interface hostname.
- */
-#if !defined(LWIP_NETIF_HOSTNAME_STRING) || defined(__DOXYGEN__)
-#define LWIP_NETIF_HOSTNAME_STRING "lwip"
-#endif
-
-/**
- * @brief Default network interface hostname.
- */
-#if !defined(LWIP_THREAD_NAME) || defined(__DOXYGEN__)
-#define LWIP_THREAD_NAME "lwipthread"
-#endif
-
-/**
- * @brief lwIP thread priority.
- */
-#ifndef LWIP_THREAD_PRIORITY
-#define LWIP_THREAD_PRIORITY LOWPRIO
-#endif
-
-/**
- * @brief lwIP thread stack size.
- */
-#if !defined(LWIP_THREAD_STACK_SIZE) || defined(__DOXYGEN__)
-#define LWIP_THREAD_STACK_SIZE 4096
-#endif
-
-/**
- * @brief Link poll interval.
- */
-#if !defined(LWIP_LINK_POLL_INTERVAL) || defined(__DOXYGEN__)
-#define LWIP_LINK_POLL_INTERVAL TIME_S2I(5)
-#endif
-
-/**
- * @brief IP Address.
- */
-#if !defined(LWIP_IPADDR) || defined(__DOXYGEN__)
-#define LWIP_IPADDR(p) IP4_ADDR(p, 192, 168, 21, 11)
-#endif
-
-/**
- * @brief IP Gateway.
- */
-#if !defined(LWIP_GATEWAY) || defined(__DOXYGEN__)
-#define LWIP_GATEWAY(p) IP4_ADDR(p, 192, 168, 21, 1)
-#endif
-
-/**
- * @brief IP netmask.
- */
-#if !defined(LWIP_NETMASK) || defined(__DOXYGEN__)
-#define LWIP_NETMASK(p) IP4_ADDR(p, 255, 255, 255, 0)
-#endif
-
-/**
- * @brief Transmission timeout.
- */
-#if !defined(LWIP_SEND_TIMEOUT) || defined(__DOXYGEN__)
-#define LWIP_SEND_TIMEOUT 100
-#endif
-
-/**
- * @brief Link speed.
- */
-#if !defined(LWIP_LINK_SPEED) || defined(__DOXYGEN__)
-#define LWIP_LINK_SPEED 100000000
-#endif
-
-/**
- * @brief MAC Address byte 0.
- */
-#if !defined(LWIP_ETHADDR_0) || defined(__DOXYGEN__)
-#define LWIP_ETHADDR_0 0x54
-#endif
-
-/**
- * @brief MAC Address byte 1.
- */
-#if !defined(LWIP_ETHADDR_1) || defined(__DOXYGEN__)
-#define LWIP_ETHADDR_1 0x54
-#endif
-
-/**
- * @brief MAC Address byte 2.
- */
-#if !defined(LWIP_ETHADDR_2) || defined(__DOXYGEN__)
-#define LWIP_ETHADDR_2 0x08
-#endif
-
-/**
- * @brief MAC Address byte 3.
- */
-#if !defined(LWIP_ETHADDR_3) || defined(__DOXYGEN__)
-#define LWIP_ETHADDR_3 0x34
-#endif
-
-/**
- * @brief MAC Address byte 4.
- */
-#if !defined(LWIP_ETHADDR_4) || defined(__DOXYGEN__)
-#define LWIP_ETHADDR_4 0x1f
-#endif
-
-/**
- * @brief MAC Address byte 5.
- */
-#if !defined(LWIP_ETHADDR_5) || defined(__DOXYGEN__)
-#define LWIP_ETHADDR_5 0x3a
-#endif
-
-/**
- * @brief Interface name byte 0.
- */
-#if !defined(LWIP_IFNAME0) || defined(__DOXYGEN__)
-#define LWIP_IFNAME0 'e'
-#endif
-
-/**
- * @brief Interface name byte 1.
- */
-#if !defined(LWIP_IFNAME1) || defined(__DOXYGEN__)
-#define LWIP_IFNAME1 'n'
-#endif
-
-/**
- * @brief Utility macro to define an IPv4 address.
- *
- * @note Within the networking subsystem, IPv4 network addresses are
- * stored with LS byte of network address in MS byte of unsigned int.
- */
-#if BYTE_ORDER == LITTLE_ENDIAN
-#define IP4_ADDR_VALUE(a,b,c,d) \
- (((u32_t)((d) & 0xff) << 24) | \
- ((u32_t)((c) & 0xff) << 16) | \
- ((u32_t)((b) & 0xff) << 8) | \
- (u32_t)((a) & 0xff))
-#else
-#define IP4_ADDR_VALUE(a,b,c,d) \
- (((u32_t)((a) & 0xff) << 24) | \
- ((u32_t)((b) & 0xff) << 16) | \
- ((u32_t)((c) & 0xff) << 8) | \
- (u32_t)((d) & 0xff))
-#endif
-
-/**
- * @brief Startup network assigning modes.
- */
-typedef enum {
-#if LWIP_DHCP || defined(__DOXYGEN__)
- /**
- * @brief Assign a DHCP given address.
- */
- NET_ADDRESS_DHCP = 1,
-#endif
- /**
- * @brief Assign a statically IPv4 address.
- */
- NET_ADDRESS_STATIC = 2,
-#if LWIP_AUTOIP || defined(__DOXYGEN__)
- /**
- * @brief Assign an IPv4 link-Local address.
- */
- NET_ADDRESS_AUTO = 3
-#endif
-} net_addr_mode_t;
-
-/**
- * @brief Runtime TCP/IP settings.
- */
-typedef struct lwipthread_opts {
- /**
- * @brief Pointer to MAC address as an array of 6 unsigned bytes.
- */
- uint8_t *macaddress;
- /**
- * @brief Network address as 32-bit unsigned integer.
- */
- uint32_t address;
- /**
- * @brief Network subnet mask as 32-bit unsigned integer.
- */
- uint32_t netmask;
- /**
- * @brief Network gateway as 32-bit unsigned integer.
- */
- uint32_t gateway;
- /**
- * @brief Startup network addressing mode - static, DHCP, auto.
- */
- net_addr_mode_t addrMode;
- /**
- * @brief Host name. If NULL, a default string is used.
- * @note Not checked for validity. In particular, spaces not allowed.
- */
-#if LWIP_NETIF_HOSTNAME || defined(__DOXYGEN__)
- const char *ourHostName;
-#endif
-} lwipthread_opts_t;
-
-#ifdef __cplusplus
-extern "C" {
-#endif
- void lwipInit(const lwipthread_opts_t *opts);
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* LWIPTHREAD_H */
-
-/** @} */
diff --git a/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-HTTPS-NSEC/main.c b/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-HTTPS-NSEC/main.c deleted file mode 100755 index a142ad107..000000000 --- a/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-HTTPS-NSEC/main.c +++ /dev/null @@ -1,115 +0,0 @@ -/*
- ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-#include "tsclient.h"
-#include "daemons/tssockskel.h"
-#include "rt_test_root.h"
-#include "oslib_test_root.h"
-#include "chprintf.h"
-#include "lwipthread.h"
-
-/*
- * LED blinker thread, times are in milliseconds.
- */
-static THD_WORKING_AREA(waThread1, 512);
-static THD_FUNCTION(Thread1, arg) {
-
- (void)arg;
- chRegSetThreadName("blinker");
-
- while (true) {
- palToggleLine(LINE_LED_RED);
- chThdSleepMilliseconds(80);
- palToggleLine(LINE_LED_RED);
- chThdSleepMilliseconds(120);
- palToggleLine(LINE_LED_RED);
- chThdSleepMilliseconds(120);
- palToggleLine(LINE_LED_RED);
- chThdSleepMilliseconds(120);
- palToggleLine(LINE_LED_RED);
- chThdSleepMilliseconds(160);
- palToggleLine(LINE_LED_RED);
- chThdSleepMilliseconds(600);
- }
-}
-
-static const SerialConfig sdcfg = {
- 115200,
- 0,
- UART_MR_PAR_NO
-};
-
-/*
- * Application entry point.
- */
-int main(void) {
- ts_service_t tssvc;
- /*
- * System initializations.
- * - HAL initialization, this also initializes the configured device drivers
- * and performs the board-specific initializations.
- * - Kernel initialization, the main() function becomes a thread and the
- * RTOS is active.
- */
- halInit();
- chSysInit();
- lwipInit(NULL);
-
- /*
- * Activates the serial driver 0 using the driver default configuration.
- */
- sdStart(&SD0, &sdcfg);
-
- /*
- * Creates the blinker thread.
- */
- chThdCreateStatic(waThread1, sizeof waThread1, NORMALPRIO-1, Thread1, NULL);
-
- tsSkelsDaemonInit();
-
- /*
- * Call the dummy secure service
- */
- chprintf((BaseSequentialStream*)&SD0, "Calling the secure service\n\r");
-
- /* Retrieve the service handle by name */
- tssvc = (ts_service_t) tsInvokeServiceNoYield(TS_HND_DISCOVERY,
- (ts_params_area_t)"TsSimpleService", sizeof "TsSimpleService");
- if ((int32_t)tssvc < 0) {
- chprintf((BaseSequentialStream*)&SD0, "Cannot get the handle of '%s': %d\r\n",
- "TsSimpleService", tssvc);
- }
- /*
- * Normal main() thread activity, in this demo it does nothing except
- * calling periodically the dummy service and check the button state.
- */
- while (true) {
- msg_t r;
-
- /* Invoke the service */
- r = tsInvokeServiceNoYield(tssvc, (ts_params_area_t)"HELO", sizeof "HELO");
- chprintf((BaseSequentialStream*)&SD0, "Call result: %d\r\n", r);
-#if 0
- if(!palReadPad(PIOB, PIOB_USER_PB)) {
- test_execute((BaseSequentialStream *)&SD0, &rt_test_suite);
- test_execute((BaseSequentialStream *)&SD0, &oslib_test_suite);
- }
-#endif
- chThdSleepMilliseconds(500);
- }
-}
diff --git a/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-HTTPS-NSEC/mcuconf.h b/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-HTTPS-NSEC/mcuconf.h deleted file mode 100644 index 324e467e4..000000000 --- a/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-HTTPS-NSEC/mcuconf.h +++ /dev/null @@ -1,143 +0,0 @@ -/*
- ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef MCUCONF_H
-#define MCUCONF_H
-
-#define SAMA5D2x_MCUCONF
-
-/*
- * HAL driver system settings.
- */
-#define SAMA_HAL_IS_SECURE FALSE
-#define SAMA_NO_INIT TRUE
-#define SAMA_MOSCRC_ENABLED FALSE
-#define SAMA_MOSCXT_ENABLED TRUE
-#define SAMA_MOSC_SEL SAMA_MOSC_MOSCXT
-#define SAMA_OSC_SEL SAMA_OSC_OSCXT
-#define SAMA_MCK_SEL SAMA_MCK_PLLA_CLK
-#define SAMA_MCK_PRES_VALUE 1
-#define SAMA_MCK_MDIV_VALUE 3
-#define SAMA_PLLA_MUL_VALUE 83
-#define SAMA_PLLADIV2_EN TRUE
-#define SAMA_H64MX_H32MX_RATIO 2
-
-/*
- * SPI driver system settings.
- */
-#define SAMA_SPI_USE_SPI0 FALSE
-#define SAMA_SPI_USE_SPI1 FALSE
-#define SAMA_SPI_USE_FLEXCOM0 FALSE
-#define SAMA_SPI_USE_FLEXCOM1 FALSE
-#define SAMA_SPI_USE_FLEXCOM2 FALSE
-#define SAMA_SPI_USE_FLEXCOM3 FALSE
-#define SAMA_SPI_USE_FLEXCOM4 FALSE
-#define SAMA_SPI_SPI0_DMA_IRQ_PRIORITY 4
-#define SAMA_SPI_SPI1_DMA_IRQ_PRIORITY 4
-#define SAMA_SPI_FLEXCOM0_DMA_IRQ_PRIORITY 4
-#define SAMA_SPI_FLEXCOM1_DMA_IRQ_PRIORITY 4
-#define SAMA_SPI_FLEXCOM2_DMA_IRQ_PRIORITY 4
-#define SAMA_SPI_FLEXCOM3_DMA_IRQ_PRIORITY 4
-#define SAMA_SPI_FLEXCOM4_DMA_IRQ_PRIORITY 4
-#define SAMA_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
-
-/*
- * SERIAL driver system settings.
- */
-#define SAMA_SERIAL_USE_UART0 TRUE
-#define SAMA_SERIAL_USE_UART1 FALSE
-#define SAMA_SERIAL_USE_UART2 FALSE
-#define SAMA_SERIAL_USE_UART3 FALSE
-#define SAMA_SERIAL_USE_UART4 FALSE
-#define SAMA_SERIAL_USE_UART5 FALSE
-#define SAMA_SERIAL_USE_FLEXCOM0 FALSE
-#define SAMA_SERIAL_USE_FLEXCOM1 FALSE
-#define SAMA_SERIAL_USE_FLEXCOM2 FALSE
-#define SAMA_SERIAL_USE_FLEXCOM3 FALSE
-#define SAMA_SERIAL_USE_FLEXCOM4 FALSE
-#define SAMA_SERIAL_UART0_IRQ_PRIORITY 4
-#define SAMA_SERIAL_UART1_IRQ_PRIORITY 4
-#define SAMA_SERIAL_UART2_IRQ_PRIORITY 4
-#define SAMA_SERIAL_UART3_IRQ_PRIORITY 4
-#define SAMA_SERIAL_UART4_IRQ_PRIORITY 4
-#define SAMA_SERIAL_FLEXCOM0_IRQ_PRIORITY 4
-#define SAMA_SERIAL_FLEXCOM1_IRQ_PRIORITY 4
-#define SAMA_SERIAL_FLEXCOM2_IRQ_PRIORITY 4
-#define SAMA_SERIAL_FLEXCOM3_IRQ_PRIORITY 4
-#define SAMA_SERIAL_FLEXCOM4_IRQ_PRIORITY 4
-
-/*
- * ST driver settings.
- */
-#define SAMA_ST_USE_PIT TRUE
-#define SAMA_ST_USE_TC0 FALSE
-#define SAMA_ST_USE_TC1 FALSE
-
-/*
- * TC driver system settings.
- */
-#define HAL_USE_TC FALSE
-#define SAMA_USE_TC0 FALSE
-#define SAMA_USE_TC1 FALSE
-#define SAMA_TC0_IRQ_PRIORITY 2
-#define SAMA_TC1_IRQ_PRIORITY 2
-
-/*
- * SECUMOD driver settings.
- */
-#define HAL_USE_SECUMOD FALSE
-
-/*
- * SDMMC driver settings.
- */
-#define HAL_USE_SDMMC FALSE
-
-/*
- * UART driver system settings.
- */
-#define SAMA_UART_USE_UART0 FALSE
-#define SAMA_UART_USE_UART1 FALSE
-#define SAMA_UART_USE_UART2 FALSE
-#define SAMA_UART_USE_UART3 FALSE
-#define SAMA_UART_USE_UART4 FALSE
-#define SAMA_UART_USE_FLEXCOM0 FALSE
-#define SAMA_UART_USE_FLEXCOM1 FALSE
-#define SAMA_UART_USE_FLEXCOM2 FALSE
-#define SAMA_UART_USE_FLEXCOM3 FALSE
-#define SAMA_UART_USE_FLEXCOM4 FALSE
-#define SAMA_UART_UART0_IRQ_PRIORITY 4
-#define SAMA_UART_UART1_IRQ_PRIORITY 4
-#define SAMA_UART_UART2_IRQ_PRIORITY 4
-#define SAMA_UART_UART3_IRQ_PRIORITY 4
-#define SAMA_UART_UART4_IRQ_PRIORITY 4
-#define SAMA_UART_FLEXCOM0_IRQ_PRIORITY 4
-#define SAMA_UART_FLEXCOM1_IRQ_PRIORITY 4
-#define SAMA_UART_FLEXCOM2_IRQ_PRIORITY 4
-#define SAMA_UART_FLEXCOM3_IRQ_PRIORITY 4
-#define SAMA_UART_FLEXCOM4_IRQ_PRIORITY 4
-#define SAMA_UART_UART0_DMA_IRQ_PRIORITY 4
-#define SAMA_UART_UART1_DMA_IRQ_PRIORITY 4
-#define SAMA_UART_UART2_DMA_IRQ_PRIORITY 4
-#define SAMA_UART_UART3_DMA_IRQ_PRIORITY 4
-#define SAMA_UART_UART4_DMA_IRQ_PRIORITY 4
-#define SAMA_UART_FLEXCOM0_DMA_IRQ_PRIORITY 4
-#define SAMA_UART_FLEXCOM1_DMA_IRQ_PRIORITY 4
-#define SAMA_UART_FLEXCOM2_DMA_IRQ_PRIORITY 4
-#define SAMA_UART_FLEXCOM3_DMA_IRQ_PRIORITY 4
-#define SAMA_UART_FLEXCOM4_DMA_IRQ_PRIORITY 4
-#define SAMA_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
-
-#endif /* MCUCONF_H */
diff --git a/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-HTTPS-NSEC/readme.txt b/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-HTTPS-NSEC/readme.txt deleted file mode 100755 index cc6e568f6..000000000 --- a/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-HTTPS-NSEC/readme.txt +++ /dev/null @@ -1,13 +0,0 @@ -*****************************************************************************
-** ChibiOS/RT port for ARM-A5. **
-*****************************************************************************
-
-** TARGET **
-
-The demo targets a generic ARM Cortex-A5 device without HAL support.
-
-** The Demo **
-
-** Build Procedure **
-
-** Notes **
diff --git a/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-HTTPS-NSEC/tsclient.c b/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-HTTPS-NSEC/tsclient.c deleted file mode 100644 index dcf3ed064..000000000 --- a/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-HTTPS-NSEC/tsclient.c +++ /dev/null @@ -1,137 +0,0 @@ -/*
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio.
-
- This file is part of ChibiOS.
-
- ChibiOS is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- ChibiOS is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/**
- * @file tsclient.c
- * @brief TSSI client module code.
- */
-
-#include "ch.h"
-#include "tsclient.h"
-
-/*===========================================================================*/
-/* Module local definitions. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Module exported variables. */
-/*===========================================================================*/
-EVENTSOURCE_DECL(stubsEventSource);
-
-/*===========================================================================*/
-/* Module local types. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Module local variables. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Module local functions. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Module exported functions. */
-/*===========================================================================*/
-
-/*
- * @brief Yields all the idle time to secure world.
- * @note see CH_CFG_IDLE_LOOP_HOOK in chconf.h
- *
- * @notapi
- */
-void tsIdle(void) {
- (void)tsInvoke1(TS_HND_IDLE, 0, 0, TS_GRANTED_TIMESLICE * 10);
-}
-
-/**
- * @brief Call a service via smc instruction with yield times.
- * @details a time slice will be yielded also to the lower prio NSEC threads,
- * whenever the service call is interrupted.
- * This avoids the starvation of NSEC threads that run to lower prio,
- * due to continue polling of the called service status.
- *
- * @param[in] handle The handle of the service to invoke.
- * The handle is obtained by an invoke to discovery
- * service.
- * @param[in,out] svc_data Service request data, often a reference to a more
- * complex structure.
- * @param[in] svc_datalen Size of the svc_data memory area.
- * @param[in] svc_nsec_time The time slice that will be yielded to the lower
- * prio NSEC threads, whenever the service call is
- * interrupted, in microseconds.
- * This avoids the starvation of NSEC threads that run
- * to lower prio, due to continue polling of the
- * called service status.
- * 0 means no time slice is yielded.
- *
- * @return The service status. The value depends on the service.
- *
- * @retval SMC_SVC_OK generic success value.
- * @retval SMC_SVC_BUSY the service has a pending request.
- * @retval SMC_SVC_INVALID bad parameters.
- * @retval SMC_SVC_NOENT no such service.
- * @retval SMC_SVC_BADH bad handle.
- *
- * @api
- */
-msg_t tsInvokeService(ts_service_t handle, ts_params_area_t data,
- size_t size)
-{
- msg_t result;
-
- result = tsInvoke1(handle, data, size, TS_GRANTED_TIMESLICE);
- while (result == SMC_SVC_INTR) {
- chThdSleepMicroseconds(TS_GRANTED_TIMESLICE);
- result = tsInvoke1(TS_HND_STQRY, handle, 0, TS_GRANTED_TIMESLICE);
- }
- return result;
-}
-
-/**
- * @brief Call a service via smc instruction without yield time to NSEC.
- *
- * @param[in] handle The handle of the service to invoke.
- * The handle is obtained by an invoke to discovery
- * service.
- * @param[in,out] svc_data Service request data, often a reference to a more
- * complex structure.
- * @param[in] svc_datalen Size of the svc_data memory area.
- *
- * @return The service status. The value depends on the service.
- *
- * @retval SMC_SVC_OK generic success value.
- * @retval SMC_SVC_BUSY the service has a pending request.
- * @retval SMC_SVC_INVALID bad parameters.
- * @retval SMC_SVC_NOENT no such service.
- * @retval SMC_SVC_BADH bad handle.
- *
- * @api
- */
-msg_t tsInvokeServiceNoYield(ts_service_t handle, ts_params_area_t data,
- size_t size)
-{
- msg_t result;
-
- result = tsInvoke1(handle, data, size, TS_GRANTED_TIMESLICE);
- while (result == SMC_SVC_INTR) {
- result = tsInvoke1(TS_HND_STQRY, handle, 0, TS_GRANTED_TIMESLICE);
- }
- return result;
-}
diff --git a/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-HTTPS-NSEC/tsclient.h b/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-HTTPS-NSEC/tsclient.h deleted file mode 100644 index e92c732db..000000000 --- a/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-HTTPS-NSEC/tsclient.h +++ /dev/null @@ -1,176 +0,0 @@ -/*
- ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio.
-
- This file is part of ChibiOS.
-
- ChibiOS is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- ChibiOS is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/**
- * @file tsclient.h
- * @brief TSSI client module macros and structures.
- */
-
-#ifndef TSCLIENT_H
-#define TSCLIENT_H
-
-/*===========================================================================*/
-/* Module constants. */
-/*===========================================================================*/
-
-/* Service registry errors as returned by smc.*/
-#define SMC_SVC_OK MSG_OK /* No error.*/
-#define SMC_SVC_INTR (msg_t)-1 /* Service interrupted.*/
-#define SMC_SVC_NOENT (msg_t)-2 /* No existent service.*/
-#define SMC_SVC_INVALID (msg_t)-3 /* Invalid service parameter(s).*/
-#define SMC_SVC_BADH (msg_t)-4 /* Invalid service handle.*/
-#define SMC_SVC_EXIST (msg_t)-5 /* Service already exists.*/
-#define SMC_SVC_NHND (msg_t)-6 /* No more services.*/
-#define SMC_SVC_BUSY (msg_t)-7 /* Service busy.*/
-
-/* Special trusted service handles.*/
-#define TS_HND_DISCOVERY ((ts_service_t *)1) /* Discovery service handle.*/
-#define TS_HND_STQRY ((ts_service_t *)2) /* Query status service handle.*/
-#define TS_HND_IDLE ((ts_service_t *)3) /* Idle service handle.*/
-
-/*===========================================================================*/
-/* Module pre-compile time settings. */
-/*===========================================================================*/
-
-#define TS_GRANTED_TIMESLICE 1000 /* Microseconds.*/
-
-#if !defined(TS_CHECK_EVENT_HOOK)
-#define TS_CHECK_EVENT_HOOK(f) { \
- extern event_source_t stubsEventSource; \
- if (f) \
- chEvtBroadcastFlags(&stubsEventSource, f); \
-}
-#endif
-
-/*===========================================================================*/
-/* Derived constants and error checks. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Module data structures and types. */
-/*===========================================================================*/
-
-typedef uint8_t * ts_params_area_t;
-typedef void * ts_service_t;
-
-/*===========================================================================*/
-/* Module macros. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Module inline functions. */
-/*===========================================================================*/
-
-/**
- * @brief Call a service via smc instruction.
- * @details call a given service via smc.
- *
- * @param[in] handle The handle of the service to invoke.
- * The handle is obtained by an invoke to discovery
- * service.
- * @param[in,out] svc_data Service request data, often a reference to a more
- * complex structure.
- * @param[in] svc_datalen Size of the svc_data memory area.
- * @param[in] yieldtime The time yield to SEC service to run, in microsec.
- *
- * @return A 64bit value. It is composed by the 32bit service
- * status in the lo-word with the 32bit event mask in
- * the hi-word.
- * The retval values are returned in the lower word
- * as 32bit int.
- * @retval SMC_SVC_OK generic success value.
- * @retval SMC_SVC_INTR call interrupted.
- * @retval SMC_SVC_BUSY the service has a pending request.
- * @retval SMC_SVC_INVALID bad parameters.
- * @retval SMC_SVC_NOENT no such service.
- * @retval SMC_SVC_BADH bad handle.
- *
- * @notapi
- */
-static inline int64_t tsInvoke0(ts_service_t handle, ts_params_area_t data,
- size_t size, sysinterval_t yieldtime) {
- register int64_t result asm("r0");
-
- register int32_t r0 asm("r0") = (int32_t) handle;
- register int32_t r1 asm("r1") = (int32_t) data;
- register int32_t r2 asm("r2") = (int32_t) size;
- register int32_t r3 asm("r3") = (int32_t) yieldtime;
-
- __asm volatile ("smc #0" : "=r" (result) : "r" (r0), "r" (r1), "r" (r2),
- "r" (r3) : "memory");
- return result;
-}
-
-/**
- * @brief Call a service via smc instruction.
- * @details call a given service via smc and evaluate the eventflags mask
- * returned by the secure world. The flags mask is checked by a
- * macro, TS_CHECK_EVENT_HOOK, supplied by the user.
- *
- * @param[in] handle The handle of the service to invoke.
- * The handle is obtained by an invoke to discovery
- * service.
- * @param[in,out] svc_data Service request data, often a reference to a more
- * complex structure.
- * @param[in] svc_datalen Size of the svc_data memory area.
- * @param[in] yieldtime The time yield to SEC service to run, in microsec.
- *
- * @return The service status. The value depends on the service.
- *
- * @retval SMC_SVC_OK generic success value.
- * @retval SMC_SVC_INTR call interrupted.
- * @retval SMC_SVC_BUSY the service has a pending request.
- * @retval SMC_SVC_INVALID bad parameters.
- * @retval SMC_SVC_NOENT no such service.
- * @retval SMC_SVC_BADH bad handle.
- *
- * @api
- */
-static inline msg_t tsInvoke1(ts_service_t handle, ts_params_area_t data,
- size_t size, sysinterval_t yieldtime) {
- int64_t result;
- eventflags_t f;
-
- result = tsInvoke0(handle, data, size, yieldtime);
- f = (eventflags_t)(result >> 32);
- TS_CHECK_EVENT_HOOK(f);
- return (msg_t)result;
-}
-
-/*===========================================================================*/
-/* External declarations. */
-/*===========================================================================*/
-
-#ifdef __cplusplus
-extern "C" {
-#endif
- msg_t tsInvokeService(ts_service_t handle, ts_params_area_t data,
- size_t size);
- msg_t tsInvokeServiceNoYield(ts_service_t handle, ts_params_area_t data,
- size_t size);
- extern event_source_t stubsEventSource;
-#ifdef __cplusplus
-}
-#endif
-
-/*===========================================================================*/
-/* Module inline functions. */
-/*===========================================================================*/
-
-#endif /* TSCLIENT_H */
|