1 files changed, 0 insertions, 124 deletions
diff --git a/demos/ARMCM4-STM32F303-DISCOVERY/main.c b/demos/ARMCM4-STM32F303-DISCOVERY/main.c
deleted file mode 100644
index ed10165af..000000000
--- a/demos/ARMCM4-STM32F303-DISCOVERY/main.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
-    ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-#include "test.h"
-
-#if 0
-/*
- * This is a periodic thread that does absolutely nothing except flashing LEDs.
- */
-static WORKING_AREA(waThread1, 128);
-static msg_t Thread1(void *arg) {
-
-  (void)arg;
-  chRegSetThreadName("blinker");
-  while (TRUE) {
-    palSetPad(GPIOE, GPIOE_LED3_RED);
-    chThdSleepMilliseconds(125);
-    palClearPad(GPIOE, GPIOE_LED3_RED);
-    palSetPad(GPIOE, GPIOE_LED5_ORANGE);
-    chThdSleepMilliseconds(125);
-    palClearPad(GPIOE, GPIOE_LED5_ORANGE);
-    palSetPad(GPIOE, GPIOE_LED7_GREEN);
-    chThdSleepMilliseconds(125);
-    palClearPad(GPIOE, GPIOE_LED7_GREEN);
-    palSetPad(GPIOE, GPIOE_LED9_BLUE);
-    chThdSleepMilliseconds(125);
-    palClearPad(GPIOE, GPIOE_LED9_BLUE);
-    palSetPad(GPIOE, GPIOE_LED10_RED);
-    chThdSleepMilliseconds(125);
-    palClearPad(GPIOE, GPIOE_LED10_RED);
-    palSetPad(GPIOE, GPIOE_LED8_ORANGE);
-    chThdSleepMilliseconds(125);
-    palClearPad(GPIOE, GPIOE_LED8_ORANGE);
-    palSetPad(GPIOE, GPIOE_LED6_GREEN);
-    chThdSleepMilliseconds(125);
-    palClearPad(GPIOE, GPIOE_LED6_GREEN);
-    palSetPad(GPIOE, GPIOE_LED4_BLUE);
-    chThdSleepMilliseconds(125);
-    palClearPad(GPIOE, GPIOE_LED4_BLUE);
-  }
-}
-#endif
-
-static WORKING_AREA(waThread1, 128);
-static msg_t Thread1(void *arg) {
-
-  (void)arg;
-  chRegSetThreadName("blinker1");
-  while (TRUE) {
-    palSetPad(GPIOE, GPIOE_LED3_RED);
-    chThdSleepMilliseconds(250);
-    palClearPad(GPIOE, GPIOE_LED3_RED);
-    chThdSleepMilliseconds(250);
-  }
-}
-
-static WORKING_AREA(waThread2, 128);
-static msg_t Thread2(void *arg) {
-
-  (void)arg;
-  chRegSetThreadName("blinker2");
-  while (TRUE) {
-    palSetPad(GPIOE, GPIOE_LED4_BLUE);
-    chThdSleepMilliseconds(500);
-    palClearPad(GPIOE, GPIOE_LED4_BLUE);
-    chThdSleepMilliseconds(500);
-  }
-}
-
-/*
- * Application entry point.
- */
-int main(void) {
-
-  /*
-   * System initializations.
-   * - HAL initialization, this also initializes the configured device drivers
-   *   and performs the board-specific initializations.
-   * - Kernel initialization, the main() function becomes a thread and the
-   *   RTOS is active.
-   */
-  halInit();
-  chSysInit();
-
-  /*
-   * Activates the serial driver 1 using the driver default configuration.
-   * PA9(TX) and PA10(RX) are routed to USART1.
-   */
-  sdStart(&SD1, NULL);
-  palSetPadMode(GPIOA, 9, PAL_MODE_ALTERNATE(7));
-  palSetPadMode(GPIOA, 10, PAL_MODE_ALTERNATE(7));
-
-  /*
-   * Creates the example thread.
-   */
-  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO+1, Thread1, NULL);
-  chThdCreateStatic(waThread2, sizeof(waThread2), NORMALPRIO+2, Thread2, NULL);
-
-  /*
-   * Normal main() thread activity, in this demo it does nothing except
-   * sleeping in a loop and check the button state, when the button is
-   * pressed the test procedure is launched.
-   */
-  while (TRUE) {
-    if (palReadPad(GPIOA, GPIOA_BUTTON))
-      TestThread(&SD1);
-    chThdSleepMilliseconds(500);
-  }
-}