1 files changed, 0 insertions, 137 deletions
diff --git a/demos/ARMCM3-LPC1343-LPCXPRESSO/main.c b/demos/ARMCM3-LPC1343-LPCXPRESSO/main.c
deleted file mode 100644
index cf5d3b96a..000000000
--- a/demos/ARMCM3-LPC1343-LPCXPRESSO/main.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
-    ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-#include "test.h"
-
-/*
- * Conversion table from hex digit to 7 segments encoding, bit 5 controls the
- * dot.
- * 8 = LU, 4 = RL, 2 = D, 1 = RU, 8 = U, 4 = M, 2 = LL, 1 = L.
- */
-static uint8_t digits[32] = {
-  0x24, 0xAF, 0xE0, 0xA2, 0x2B, 0x32, 0x30, 0xA7,
-  0x20, 0x22, 0x21, 0x38, 0x74, 0xA8, 0x70, 0x71,
-  0x04, 0x8F, 0xC0, 0x82, 0x0B, 0x12, 0x10, 0x87,
-  0x00, 0x02, 0x01, 0x18, 0x54, 0x88, 0x50, 0x51
-};
-
-/*
- * SPI configuration (1MHz, CPHA=0, CPOL=0).
- */
-static SPIConfig spicfg = {
-  NULL,
-  GPIO1,
-  GPIO1_SPI0SEL,
-  CR0_DSS8BIT | CR0_FRFSPI | CR0_CLOCKRATE(0),
-  72
-};
-
-/*
- * Red LED blinker thread, times are in milliseconds.
- */
-static WORKING_AREA(waThread1, 128);
-static msg_t Thread1(void *arg) {
-
-  (void)arg;
-  chRegSetThreadName("blinker1");
-  while (TRUE) {
-    palClearPad(GPIO0, GPIO0_LED2);
-    chThdSleepMilliseconds(500);
-    palSetPad(GPIO0, GPIO0_LED2);
-    chThdSleepMilliseconds(500);
-  }
-}
-
-/*
- * RGB LED blinker thread, times are in milliseconds.
- */
-static WORKING_AREA(waThread2, 128);
-static msg_t Thread2(void *arg) {
-
-  (void)arg;
-  chRegSetThreadName("blinker2");
-  while (TRUE) {
-    palClearPort(GPIO1, PAL_PORT_BIT(GPIO1_LED3B) |
-                        PAL_PORT_BIT(GPIO1_LED3R) |
-                        PAL_PORT_BIT(GPIO1_LED3G));
-    chThdSleepMilliseconds(250);
-    palClearPort(GPIO1, PAL_PORT_BIT(GPIO1_LED3B) |
-                        PAL_PORT_BIT(GPIO1_LED3R) |
-                        PAL_PORT_BIT(GPIO1_LED3G));
-    palSetPort(GPIO1, PAL_PORT_BIT(GPIO1_LED3B));
-    chThdSleepMilliseconds(250);
-    palClearPort(GPIO1, PAL_PORT_BIT(GPIO1_LED3B) |
-                        PAL_PORT_BIT(GPIO1_LED3R) |
-                        PAL_PORT_BIT(GPIO1_LED3G));
-    palSetPort(GPIO1, PAL_PORT_BIT(GPIO1_LED3R));
-    chThdSleepMilliseconds(250);
-    palClearPort(GPIO1, PAL_PORT_BIT(GPIO1_LED3B) |
-                        PAL_PORT_BIT(GPIO1_LED3R) |
-                        PAL_PORT_BIT(GPIO1_LED3G));
-    palSetPort(GPIO1, PAL_PORT_BIT(GPIO1_LED3G));
-    chThdSleepMilliseconds(250);
-  }
-}
-
-/*
- * Application entry point.
- */
-int main(void) {
-  uint8_t i;
-
-  /*
-   * System initializations.
-   * - HAL initialization, this also initializes the configured device drivers
-   *   and performs the board-specific initializations.
-   * - Kernel initialization, the main() function becomes a thread and the
-   *   RTOS is active.
-   */
-  halInit();
-  chSysInit();
-
-  /*
-   * Activates the SD1 and SPI1 drivers.
-   */
-  sdStart(&SD1, NULL);                  /* Default: 38400,8,N,1.            */
-  spiStart(&SPID1, &spicfg);
-
-  /*
-   * Creates the blinker threads.
-   */
-  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
-  chThdCreateStatic(waThread2, sizeof(waThread2), NORMALPRIO, Thread2, NULL);
-
-  /*
-   * Normal main() thread activity, in this demo it updates the 7-segments
-   * display on the LPCXpresso main board using the SPI driver.
-   */
-  i = 0;
-  while (TRUE) {
-    if (!palReadPad(GPIO0, GPIO0_SW3))
-      TestThread(&SD1);
-    spiSelect(&SPID1);
-    spiSend(&SPID1, 1, &digits[i]);                 /* Non polled method.   */
-    spiUnselect(&SPID1);
-    chThdSleepMilliseconds(500);
-    spiSelect(&SPID1);
-    spiPolledExchange(&SPID1, digits[i | 0x10]);    /* Polled method.       */
-    spiUnselect(&SPID1);
-    chThdSleepMilliseconds(500);
-    i = (i + 1) & 15;
-  }
-}