diff options
Diffstat (limited to 'demos/ARM7-AT91SAM7X-LWIP-GCC')
-rw-r--r-- | demos/ARM7-AT91SAM7X-LWIP-GCC/halconf.h | 232 |
1 files changed, 161 insertions, 71 deletions
diff --git a/demos/ARM7-AT91SAM7X-LWIP-GCC/halconf.h b/demos/ARM7-AT91SAM7X-LWIP-GCC/halconf.h index 0fdc6cf1c..3ccb9a219 100644 --- a/demos/ARM7-AT91SAM7X-LWIP-GCC/halconf.h +++ b/demos/ARM7-AT91SAM7X-LWIP-GCC/halconf.h @@ -18,156 +18,246 @@ */
/**
- * @file templates/halconf.h
- * @brief HAL configuration header.
+ * @file templates/halconf.h
+ * @brief HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ * various device drivers from your application. You may also use
+ * this file in order to override the device drivers default settings.
+ *
* @addtogroup HAL_CONF
* @{
*/
/*
- * HAL configuration file, this file allows to enable or disable the various
- * device drivers from your application. You may also use this file in order
- * to override the device drivers default settings.
+ *
*/
#ifndef _HALCONF_H_
#define _HALCONF_H_
-/*
- * Uncomment the following line in order to include a mcu-related
- * settings file. This file can be used to include platform specific
- * header files or to override the low level drivers settings.
- */
#include "mcuconf.h"
-/*===========================================================================*/
-/* PAL driver related settings. */
-/*===========================================================================*/
+/**
+ * @brief Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL TRUE
+#endif
/**
- * @brief Enables the PAL subsystem.
+ * @brief Enables the ADC subsystem.
*/
-#if !defined(CH_HAL_USE_PAL) || defined(__DOXYGEN__)
-#define CH_HAL_USE_PAL TRUE
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC FALSE
#endif
-/*===========================================================================*/
-/* ADC driver related settings. */
-/*===========================================================================*/
+/**
+ * @brief Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN FALSE
+#endif
/**
- * @brief Enables the ADC subsystem.
+ * @brief Enables the I2C subsystem.
*/
-#if !defined(CH_HAL_USE_ADC) || defined(__DOXYGEN__)
-#define CH_HAL_USE_ADC FALSE
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C FALSE
#endif
-/*
- * Default ADC settings overrides (uncomment to override).
+/**
+ * @brief Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC TRUE
+#endif
+
+/**
+ * @brief Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM FALSE
+#endif
+
+/**
+ * @brief Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL TRUE
+#endif
+
+/**
+ * @brief Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the UART subsystem.
*/
-/*#define ADC_USE_WAIT TRUE*/
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART FALSE
+#endif
/*===========================================================================*/
-/* CAN driver related settings. */
+/* ADC driver related settings. */
/*===========================================================================*/
/**
- * @brief Enables the CAN subsystem.
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
*/
-#if !defined(CH_HAL_USE_CAN) || defined(__DOXYGEN__)
-#define CH_HAL_USE_CAN FALSE
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT TRUE
#endif
-/*
- * Default CAN settings overrides (uncomment to override).
+/**
+ * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
*/
-/*#define CAN_USE_SLEEP_MODE TRUE*/
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION TRUE
+#endif
/*===========================================================================*/
-/* MAC driver related settings. */
+/* CAN driver related settings. */
/*===========================================================================*/
/**
- * @brief Enables the MAC subsystem.
+ * @brief Sleep mode related APIs inclusion switch.
*/
-#if !defined(CH_HAL_USE_MAC) || defined(__DOXYGEN__)
-#define CH_HAL_USE_MAC TRUE
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE TRUE
#endif
/*===========================================================================*/
-/* PWM driver related settings. */
+/* I2C driver related settings. */
/*===========================================================================*/
/**
- * @brief Enables the PWM subsystem.
+ * @brief Enables the mutual exclusion APIs on the I2C bus.
*/
-#if !defined(CH_HAL_USE_PWM) || defined(__DOXYGEN__)
-#define CH_HAL_USE_PWM FALSE
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION TRUE
#endif
/*===========================================================================*/
-/* SERIAL driver related settings. */
+/* MAC driver related settings. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings. */
/*===========================================================================*/
/**
- * @brief Enables the SERIAL subsystem.
+ * @brief Block size for MMC transfers.
*/
-#if !defined(CH_HAL_USE_SERIAL) || defined(__DOXYGEN__)
-#define CH_HAL_USE_SERIAL TRUE
+#if !defined(MMC_SECTOR_SIZE) || defined(__DOXYGEN__)
+#define MMC_SECTOR_SIZE 512
#endif
-/*
- * Default SERIAL settings overrides (uncomment to override).
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ * This option is recommended also if the SPI driver does not
+ * use a DMA channel and heavily loads the CPU.
*/
-/*#define SERIAL_DEFAULT_BITRATE 38400*/
-/*#define SERIAL_BUFFERS_SIZE 64*/
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING TRUE
+#endif
-/*===========================================================================*/
-/* SPI driver related settings. */
-/*===========================================================================*/
+/**
+ * @brief Number of positive insertion queries before generating the
+ * insertion event.
+ */
+#if !defined(MMC_POLLING_INTERVAL) || defined(__DOXYGEN__)
+#define MMC_POLLING_INTERVAL 10
+#endif
/**
- * @brief Enables the SPI subsystem.
+ * @brief Interval, in milliseconds, between insertion queries.
*/
-#if !defined(CH_HAL_USE_SPI) || defined(__DOXYGEN__)
-#define CH_HAL_USE_SPI FALSE
+#if !defined(MMC_POLLING_DELAY) || defined(__DOXYGEN__)
+#define MMC_POLLING_DELAY 10
#endif
-/*
- * Default SPI settings overrides (uncomment to override).
+/**
+ * @brief Uses the SPI polled API for small data transfers.
+ * @details Polled transfers usually improve performance because it
+ * saves two context switches and interrupt servicing. Note
+ * that this option has no effect on large transfers which
+ * are always performed using DMAs/IRQs.
*/
-/*#define SPI_USE_MUTUAL_EXCLUSION TRUE*/
+#if !defined(MMC_USE_SPI_POLLING) || defined(__DOXYGEN__)
+#define MMC_USE_SPI_POLLING TRUE
+#endif
/*===========================================================================*/
-/* MMC_SPI driver related settings. */
+/* PAL driver related settings. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* PWM driver related settings. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* SERIAL driver related settings. */
/*===========================================================================*/
/**
- * @brief Enables the MMC_SPI subsystem.
+ * @brief Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ * default configuration.
*/
-#if !defined(CH_HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
-#define CH_HAL_USE_MMC_SPI FALSE
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE 38400
#endif
-/*
- * Default MMC_SPI settings overrides (uncomment to override).
+/**
+ * @brief Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ * buffers depending on the requirements of your application.
+ * @note The default is 64 bytes for both the transmission and receive
+ * buffers.
*/
-/*#define MMC_SECTOR_SIZE 512*/
-/*#define MMC_NICE_WAITING TRUE*/
-/*#define MMC_POLLING_INTERVAL 10*/
-/*#define MMC_POLLING_DELAY 10*/
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE 16
+#endif
/*===========================================================================*/
-/* UART driver related settings. */
+/* SPI driver related settings. */
/*===========================================================================*/
/**
- * @brief Enables the UART subsystem.
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
*/
-#if !defined(CH_HAL_USE_UART) || defined(__DOXYGEN__)
-#define CH_HAL_USE_UART FALSE
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT TRUE
#endif
+/**
+ * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings. */
+/*===========================================================================*/
+
#endif /* _HALCONF_H_ */
/** @} */
|