diff options
Diffstat (limited to 'boards')
137 files changed, 0 insertions, 19713 deletions
diff --git a/boards/ARDUINO_MEGA/board.c b/boards/ARDUINO_MEGA/board.c deleted file mode 100644 index a33d693ad..000000000 --- a/boards/ARDUINO_MEGA/board.c +++ /dev/null @@ -1,102 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-/**
- * @brief PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- * This variable is used by the HAL when initializing the PAL driver.
- */
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-const PALConfig pal_default_config =
-{
-#if defined(PORTA)
- {VAL_PORTA, VAL_DDRA},
-#endif
-#if defined(PORTB)
- {VAL_PORTB, VAL_DDRB},
-#endif
-#if defined(PORTC)
- {VAL_PORTC, VAL_DDRC},
-#endif
-#if defined(PORTD)
- {VAL_PORTD, VAL_DDRD},
-#endif
-#if defined(PORTE)
- {VAL_PORTE, VAL_DDRE},
-#endif
-#if defined(PORTF)
- {VAL_PORTF, VAL_DDRF},
-#endif
-#if defined(PORTG)
- {VAL_PORTG, VAL_DDRG},
-#endif
-#if defined(PORTH)
- {VAL_PORTH, VAL_DDRH},
-#endif
-#if defined(PORTJ)
- {VAL_PORTJ, VAL_DDRJ},
-#endif
-#if defined(PORTK)
- {VAL_PORTK, VAL_DDRK},
-#endif
-#if defined(PORTL)
- {VAL_PORTL, VAL_DDRL},
-#endif
-};
-#endif /* HAL_USE_PAL */
-
-/**
- * @brief Timer0 interrupt handler.
- */
-CH_IRQ_HANDLER(TIMER0_COMPA_vect) {
-
- CH_IRQ_PROLOGUE();
-
- chSysLockFromIsr();
- chSysTimerHandlerI();
- chSysUnlockFromIsr();
-
- CH_IRQ_EPILOGUE();
-}
-
-/**
- * Board-specific initialization code.
- */
-void boardInit(void) {
-
- /*
- * External interrupts setup, all disabled initially.
- */
- EICRA = 0x00;
- EICRB = 0x00;
- EIMSK = 0x00;
-
- /*
- * Timer 0 setup.
- */
- TCCR0A = (1 << WGM01) | (0 << WGM00) | /* CTC mode. */
- (0 << COM0A1) | (0 << COM0A0) | /* OC0A disabled. */
- (0 << COM0B1) | (0 << COM0B0); /* OC0B disabled. */
- TCCR0B = (0 << WGM02) | /* CTC mode. */
- (0 << CS02) | (1 << CS01) | (1 << CS00); /* CLK/64 clock. */
- OCR0A = F_CPU / 64 / CH_FREQUENCY - 1;
- TCNT0 = 0; /* Reset counter. */
- TIFR0 = (1 << OCF0A); /* Reset pending. */
- TIMSK0 = (1 << OCIE0A); /* IRQ on compare. */
-}
diff --git a/boards/ARDUINO_MEGA/board.h b/boards/ARDUINO_MEGA/board.h deleted file mode 100644 index 9dc3b09e4..000000000 --- a/boards/ARDUINO_MEGA/board.h +++ /dev/null @@ -1,86 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for the Arduino Mega board.
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_ARDUINO_MEGA
-#define BOARD_NAME "Arduino Mega"
-
-/* All inputs with pull-ups */
-#define VAL_DDRA 0x00
-#define VAL_PORTA 0xFF
-
-/* All inputs except PB7 which has a LED connected */
-#define VAL_DDRB 0x80
-#define VAL_PORTB 0xFF
-
-/* All inputs with pull-ups */
-#define VAL_DDRC 0x00
-#define VAL_PORTC 0xFF
-
-/* All inputs with pull-ups */
-#define VAL_DDRD 0x00
-#define VAL_PORTD 0xFF
-
-/* All inputs except PE1 (Serial TX0) */
-#define VAL_DDRE 0x02
-#define VAL_PORTE 0xFF
-
-/* All inputs with pull-ups */
-#define VAL_DDRF 0x00
-#define VAL_PORTF 0xFF
-
-/* All inputs with pull-ups */
-#define VAL_DDRG 0x00
-#define VAL_PORTG 0xFF
-
-/* All inputs with pull-ups */
-#define VAL_DDRH 0x00
-#define VAL_PORTH 0xFF
-
-/* All inputs with pull-ups */
-#define VAL_DDRJ 0x00
-#define VAL_PORTJ 0xFF
-
-/* All inputs with pull-ups */
-#define VAL_DDRK 0x00
-#define VAL_PORTK 0xFF
-
-/* All inputs with pull-ups */
-#define VAL_DDRL 0x00
-#define VAL_PORTL 0xFF
-
-#define PORTB_LED1 7
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
diff --git a/boards/ARDUINO_MEGA/board.mk b/boards/ARDUINO_MEGA/board.mk deleted file mode 100644 index 8e7f1117e..000000000 --- a/boards/ARDUINO_MEGA/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files.
-BOARDSRC = ${CHIBIOS}/boards/ARDUINO_MEGA/board.c
-
-# Required include directories
-BOARDINC = ${CHIBIOS}/boards/ARDUINO_MEGA
diff --git a/boards/EA_LPCXPRESSO_11C24/board.c b/boards/EA_LPCXPRESSO_11C24/board.c deleted file mode 100644 index 0e00ff2a3..000000000 --- a/boards/EA_LPCXPRESSO_11C24/board.c +++ /dev/null @@ -1,54 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
- LPC11C24 EA Board support - Copyright (C) 2013 mike brown
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-/**
- * @brief PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- * This variable is used by the HAL when initializing the PAL driver.
- */
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-const PALConfig pal_default_config = {
- {VAL_GPIO0DATA, VAL_GPIO0DIR},
- {VAL_GPIO1DATA, VAL_GPIO1DIR},
- {VAL_GPIO2DATA, VAL_GPIO2DIR},
- {VAL_GPIO3DATA, VAL_GPIO3DIR},
-};
-#endif
-
-/*
- * Early initialization code.
- * This initialization must be performed just after stack setup and before
- * any other initialization.
- */
-void __early_init(void) {
-
- lpc111x_clock_init();
-}
-
-/*
- * Board-specific initialization code.
- */
-void boardInit(void) {
-
- /*
- * Extra, board-specific, initializations.
- */
- LPC_IOCON->PIO0_7 = 0xC0; /* Disables pull-up on LED2 output. */
-}
diff --git a/boards/EA_LPCXPRESSO_11C24/board.h b/boards/EA_LPCXPRESSO_11C24/board.h deleted file mode 100644 index b8de6f790..000000000 --- a/boards/EA_LPCXPRESSO_11C24/board.h +++ /dev/null @@ -1,82 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
- LPC11C24 EA Board support - Copyright (C) 2013 mike brown
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for Embedded Artists LPCXpresso LPC11C24
- * board.
- */
-
-/*
- * Board identifiers.
- */
-#define BOARD_EA_BB_LPC11C24
-#define BOARD_NAME "Embedded Artists LPCXpresso LPC11C24"
-
-/*
- * Board frequencies.
- */
-#define SYSOSCCLK 12000000
-
-/*
- * SCK0 connection on this board.
- */
-#define LPC11xx_SPI_SCK0_SELECTOR SCK0_IS_PIO2_11
-
-/*
- * GPIO 0 initial setup.
- */
-#define VAL_GPIO0DIR PAL_PORT_BIT(GPIO0_LED)
-#define VAL_GPIO0DATA 0x00000000
-
-/*
- * GPIO 1 initial setup.
- */
-#define VAL_GPIO1DIR 0x00000000
-#define VAL_GPIO1DATA 0x00000000
-
-/*
- * GPIO 2 initial setup.
- */
-#define VAL_GPIO2DIR 0x00000000
-#define VAL_GPIO2DATA 0x00000000
-
-/*
- * GPIO 3 initial setup.
- */
-#define VAL_GPIO3DIR 0x00000000
-#define VAL_GPIO3DATA 0x00000000
-
-/*
- * Pin definitions.
- */
-#define GPIO0_SW_ISP 1
-#define GPIO0_LED 7
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
diff --git a/boards/EA_LPCXPRESSO_11C24/board.mk b/boards/EA_LPCXPRESSO_11C24/board.mk deleted file mode 100644 index d60e6ea6d..000000000 --- a/boards/EA_LPCXPRESSO_11C24/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files.
-BOARDSRC = ${CHIBIOS}/boards/EA_LPCXPRESSO_11C24/board.c
-
-# Required include directories
-BOARDINC = ${CHIBIOS}/boards/EA_LPCXPRESSO_11C24
diff --git a/boards/EA_LPCXPRESSO_BB_1114/board.c b/boards/EA_LPCXPRESSO_BB_1114/board.c deleted file mode 100644 index a0af7d697..000000000 --- a/boards/EA_LPCXPRESSO_BB_1114/board.c +++ /dev/null @@ -1,59 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-/**
- * @brief PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- * This variable is used by the HAL when initializing the PAL driver.
- */
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-const PALConfig pal_default_config = {
- {VAL_GPIO0DATA, VAL_GPIO0DIR},
- {VAL_GPIO1DATA, VAL_GPIO1DIR},
- {VAL_GPIO2DATA, VAL_GPIO2DIR},
- {VAL_GPIO3DATA, VAL_GPIO3DIR},
-};
-#endif
-
-/*
- * Early initialization code.
- * This initialization must be performed just after stack setup and before
- * any other initialization.
- */
-void __early_init(void) {
-
- lpc111x_clock_init();
-}
-
-/*
- * Board-specific initialization code.
- */
-void boardInit(void) {
-
- /*
- * Extra, board-specific, initializations.
- * NOTE: PIO1_2 is associated also to the JTAG, if you need to use JTAG
- * you must comment that line first.
- */
- LPC_IOCON->PIO0_7 = 0xC0; /* Disables pull-up on LED2 output. */
- LPC_IOCON->R_PIO1_2 = 0xC1; /* Disables pull-up on LED3B output
- and makes it GPIO1_2. */
- LPC_IOCON->PIO1_9 = 0xC0; /* Disables pull-up on LED3R output.*/
- LPC_IOCON->PIO1_10 = 0xC0; /* Disables pull-up on LED3G output.*/
-}
diff --git a/boards/EA_LPCXPRESSO_BB_1114/board.h b/boards/EA_LPCXPRESSO_BB_1114/board.h deleted file mode 100644 index c27830d28..000000000 --- a/boards/EA_LPCXPRESSO_BB_1114/board.h +++ /dev/null @@ -1,96 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for Embedded Artists LPCXpresso Base Board with LPC1114 daughter
- * board.
- */
-
-/*
- * Board identifiers.
- */
-#define BOARD_EA_BB_LPC1114
-#define BOARD_NAME "Embedded Artists LPCXpresso Base Board + LPC1114"
-
-/*
- * Board frequencies.
- */
-#define SYSOSCCLK 12000000
-
-/*
- * SCK0 connection on this board.
- */
-#define LPC11xx_SPI_SCK0_SELECTOR SCK0_IS_PIO2_11
-
-/*
- * GPIO 0 initial setup.
- */
-#define VAL_GPIO0DIR PAL_PORT_BIT(GPIO0_OLEDSEL) | \
- PAL_PORT_BIT(GPIO0_LED2)
-#define VAL_GPIO0DATA PAL_PORT_BIT(GPIO0_OLEDSEL) | \
- PAL_PORT_BIT(GPIO0_LED2)
-
-/*
- * GPIO 1 initial setup.
- */
-#define VAL_GPIO1DIR PAL_PORT_BIT(GPIO1_LED3B) | \
- PAL_PORT_BIT(GPIO1_LED3R) | \
- PAL_PORT_BIT(GPIO1_LED3G) | \
- PAL_PORT_BIT(GPIO1_SPI0SEL)
-#define VAL_GPIO1DATA PAL_PORT_BIT(GPIO1_LED3B) | \
- PAL_PORT_BIT(GPIO1_LED3R) | \
- PAL_PORT_BIT(GPIO1_LED3G) | \
- PAL_PORT_BIT(GPIO1_SPI0SEL)
-
-/*
- * GPIO 2 initial setup.
- */
-#define VAL_GPIO2DIR 0x00000000
-#define VAL_GPIO2DATA 0x00000000
-
-/*
- * GPIO 3 initial setup.
- */
-#define VAL_GPIO3DIR 0x00000000
-#define VAL_GPIO3DATA 0x00000000
-
-/*
- * Pin definitions.
- */
-#define GPIO0_SW3 1
-#define GPIO0_OLEDSEL 2
-#define GPIO0_LED2 7
-
-#define GPIO1_LED3B 2
-#define GPIO1_SW4 4
-#define GPIO1_LED3R 9
-#define GPIO1_LED3G 10
-#define GPIO1_SPI0SEL 11
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
diff --git a/boards/EA_LPCXPRESSO_BB_1114/board.mk b/boards/EA_LPCXPRESSO_BB_1114/board.mk deleted file mode 100644 index affca2d05..000000000 --- a/boards/EA_LPCXPRESSO_BB_1114/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files.
-BOARDSRC = ${CHIBIOS}/boards/EA_LPCXPRESSO_BB_1114/board.c
-
-# Required include directories
-BOARDINC = ${CHIBIOS}/boards/EA_LPCXPRESSO_BB_1114
diff --git a/boards/EA_LPCXPRESSO_BB_11U14/board.c b/boards/EA_LPCXPRESSO_BB_11U14/board.c deleted file mode 100644 index 117e78c0e..000000000 --- a/boards/EA_LPCXPRESSO_BB_11U14/board.c +++ /dev/null @@ -1,66 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-/**
- * @brief PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- * This variable is used by the HAL when initializing the PAL driver.
- */
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-const PALConfig pal_default_config = {
- {VAL_GPIO0DATA, VAL_GPIO0DIR},
- {VAL_GPIO1DATA, VAL_GPIO1DIR}
-};
-#endif
-
-/*
- * Early initialization code.
- * This initialization must be performed just after stack setup and before
- * any other initialization.
- */
-void __early_init(void) {
-
- lpc_clock_init();
-}
-
-/*
- * Board-specific initialization code.
- */
-void boardInit(void) {
-
- /*
- * Extra, board-specific, initializations.
- * NOTE: PIO1_2 is associated also to the JTAG, if you need to use JTAG
- * you must comment that line first.
- */
- LPC_IOCON->PIO0_7 = 0x80; /* Disables pull-up on LED2 output. */
- LPC_IOCON->TRST_PIO0_14 = 0x81; /* Disables pull-up on LED3B output
- and makes it GPIO1_2. */
- LPC_IOCON->PIO0_21 = 0x80; /* Disables pull-up on LED3R output.*/
- LPC_IOCON->PIO0_22 = 0x80; /* Disables pull-up on LED3G output.*/
-
- /* SSP0 mapping.*/
- LPC_IOCON->PIO1_29 = 0x81; /* SCK0 without resistors. */
- LPC_IOCON->PIO0_8 = 0x81; /* MISO0 without resistors. */
- LPC_IOCON->PIO0_9 = 0x81; /* MOSI0 without resistors. */
-
- /* USART mapping.*/
- LPC_IOCON->PIO0_18 = 0x81; /* RDX without resistors. */
- LPC_IOCON->PIO0_19 = 0x81; /* TDX without resistors. */
-}
diff --git a/boards/EA_LPCXPRESSO_BB_11U14/board.h b/boards/EA_LPCXPRESSO_BB_11U14/board.h deleted file mode 100644 index dac011460..000000000 --- a/boards/EA_LPCXPRESSO_BB_11U14/board.h +++ /dev/null @@ -1,88 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for Embedded Artists LPCXpresso Base Board with LPC1114 daughter
- * board.
- */
-
-/*
- * Board identifiers.
- */
-#define BOARD_EA_BB_LPC11U14
-#define BOARD_NAME "Embedded Artists LPCXpresso Base Board + LPC11U14"
-
-/*
- * Board frequencies.
- */
-#define SYSOSCCLK 12000000
-
-/*
- * SCK0 connection on this board.
- */
-#define LPC11xx_SPI_SCK0_SELECTOR SCK0_IS_PIO2_11
-
-/*
- * GPIO 0 initial setup.
- */
-#define VAL_GPIO0DIR PAL_PORT_BIT(GPIO0_OLEDSEL) | \
- PAL_PORT_BIT(GPIO0_USB_DPCTL) | \
- PAL_PORT_BIT(GPIO0_LED2) | \
- PAL_PORT_BIT(GPIO0_LED3B) | \
- PAL_PORT_BIT(GPIO0_LED3R) | \
- PAL_PORT_BIT(GPIO0_LED3G) | \
- PAL_PORT_BIT(GPIO0_SPI0SEL)
-#define VAL_GPIO0DATA PAL_PORT_BIT(GPIO0_OLEDSEL) | \
- PAL_PORT_BIT(GPIO0_LED2) | \
- PAL_PORT_BIT(GPIO0_LED3B) | \
- PAL_PORT_BIT(GPIO0_LED3R) | \
- PAL_PORT_BIT(GPIO0_LED3G) | \
- PAL_PORT_BIT(GPIO0_SPI0SEL)
-
-/*
- * GPIO 1 initial setup.
- */
-#define VAL_GPIO1DIR 0x00000000
-#define VAL_GPIO1DATA 0x00000000
-
-/*
- * Pin definitions.
- */
-#define GPIO0_SW3 1
-#define GPIO0_OLEDSEL 2
-#define GPIO0_USB_VBUS 3
-#define GPIO0_USB_DPCTL 6
-#define GPIO0_LED2 7
-#define GPIO0_SW4 16
-#define GPIO0_LED3B 14
-#define GPIO0_LED3R 21
-#define GPIO0_LED3G 22
-#define GPIO0_SPI0SEL 23
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
diff --git a/boards/EA_LPCXPRESSO_BB_11U14/board.mk b/boards/EA_LPCXPRESSO_BB_11U14/board.mk deleted file mode 100644 index 1c5d132d2..000000000 --- a/boards/EA_LPCXPRESSO_BB_11U14/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files.
-BOARDSRC = ${CHIBIOS}/boards/EA_LPCXPRESSO_BB_11U14/board.c
-
-# Required include directories
-BOARDINC = ${CHIBIOS}/boards/EA_LPCXPRESSO_BB_11U14
diff --git a/boards/EA_LPCXPRESSO_BB_1343/board.c b/boards/EA_LPCXPRESSO_BB_1343/board.c deleted file mode 100644 index d25d93d20..000000000 --- a/boards/EA_LPCXPRESSO_BB_1343/board.c +++ /dev/null @@ -1,59 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-/**
- * @brief PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- * This variable is used by the HAL when initializing the PAL driver.
- */
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-const PALConfig pal_default_config = {
- {VAL_GPIO0DATA, VAL_GPIO0DIR},
- {VAL_GPIO1DATA, VAL_GPIO1DIR},
- {VAL_GPIO2DATA, VAL_GPIO2DIR},
- {VAL_GPIO3DATA, VAL_GPIO3DIR},
-};
-#endif
-
-/*
- * Early initialization code.
- * This initialization must be performed just after stack setup and before
- * any other initialization.
- */
-void __early_init(void) {
-
- LPC13xx_clock_init();
-}
-
-/*
- * Board-specific initialization code.
- */
-void boardInit(void) {
-
- /*
- * Extra, board-specific, initializations.
- * NOTE: PIO1_2 is associated also to the JTAG, if you need to use JTAG
- * you must comment that line first.
- */
- LPC_IOCON->PIO0_7 = 0xC0; /* Disables pull-up on LED2 output. */
- LPC_IOCON->R_PIO1_2 = 0xC1; /* Disables pull-up on LED3B output
- and makes it GPIO1_2. */
- LPC_IOCON->PIO1_9 = 0xC0; /* Disables pull-up on LED3R output.*/
- LPC_IOCON->PIO1_10 = 0xC0; /* Disables pull-up on LED3G output.*/
-}
diff --git a/boards/EA_LPCXPRESSO_BB_1343/board.h b/boards/EA_LPCXPRESSO_BB_1343/board.h deleted file mode 100644 index b5ad73dbd..000000000 --- a/boards/EA_LPCXPRESSO_BB_1343/board.h +++ /dev/null @@ -1,91 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for Embedded Artists LPCXpresso Base Board with LPC1343 daughter
- * board.
- */
-
-/*
- * Board identifiers.
- */
-#define BOARD_EA_BB_LPC1343
-#define BOARD_NAME "Embedded Artists LPCXpresso Base Board + LPC1343"
-
-/*
- * Board frequencies.
- */
-#define SYSOSCCLK 12000000
-
-/*
- * GPIO 0 initial setup.
- */
-#define VAL_GPIO0DIR PAL_PORT_BIT(GPIO0_OLEDSEL) | \
- PAL_PORT_BIT(GPIO0_LED2)
-#define VAL_GPIO0DATA PAL_PORT_BIT(GPIO0_OLEDSEL) | \
- PAL_PORT_BIT(GPIO0_LED2)
-
-/*
- * GPIO 1 initial setup.
- */
-#define VAL_GPIO1DIR PAL_PORT_BIT(GPIO1_LED3B) | \
- PAL_PORT_BIT(GPIO1_LED3R) | \
- PAL_PORT_BIT(GPIO1_LED3G) | \
- PAL_PORT_BIT(GPIO1_SPI0SEL)
-#define VAL_GPIO1DATA PAL_PORT_BIT(GPIO1_LED3B) | \
- PAL_PORT_BIT(GPIO1_LED3R) | \
- PAL_PORT_BIT(GPIO1_LED3G) | \
- PAL_PORT_BIT(GPIO1_SPI0SEL)
-
-/*
- * GPIO 2 initial setup.
- */
-#define VAL_GPIO2DIR 0x00000000
-#define VAL_GPIO2DATA 0x00000000
-
-/*
- * GPIO 3 initial setup.
- */
-#define VAL_GPIO3DIR 0x00000000
-#define VAL_GPIO3DATA 0x00000000
-
-/*
- * Pin definitions.
- */
-#define GPIO0_SW3 1
-#define GPIO0_OLEDSEL 2
-#define GPIO0_LED2 7
-
-#define GPIO1_LED3B 2
-#define GPIO1_SW4 4
-#define GPIO1_LED3R 9
-#define GPIO1_LED3G 10
-#define GPIO1_SPI0SEL 11
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
diff --git a/boards/EA_LPCXPRESSO_BB_1343/board.mk b/boards/EA_LPCXPRESSO_BB_1343/board.mk deleted file mode 100644 index da59e98c4..000000000 --- a/boards/EA_LPCXPRESSO_BB_1343/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files.
-BOARDSRC = ${CHIBIOS}/boards/EA_LPCXPRESSO_BB_1343/board.c
-
-# Required include directories
-BOARDINC = ${CHIBIOS}/boards/EA_LPCXPRESSO_BB_1343
diff --git a/boards/EA_LPCXPRESSO_LPC812/board.c b/boards/EA_LPCXPRESSO_LPC812/board.c deleted file mode 100644 index 1f1952dbf..000000000 --- a/boards/EA_LPCXPRESSO_LPC812/board.c +++ /dev/null @@ -1,136 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-/**
- * @brief PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- * This variable is used by the HAL when initializing the PAL driver.
- */
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-const PALConfig pal_default_config = {VAL_GPIO0DATA, VAL_GPIO0DIR};
-#endif
-
-/*
- * Early initialization code.
- * This initialization must be performed just after stack setup and before
- * any other initialization.
- */
-void __early_init(void){
-
- lpc8xx_clock_init();
-}
-
-/*
- * Board-specific initialization code.
- */
-void boardInit(void){
-
- /* Enable clocks to IOCON & SWM */
- LPC_SYSCON->SYSAHBCLKCTRL |= ((1<<18)|(1<<7));
-
-#if defined VAL_PIO0_0
- LPC_IOCON->PIO0_0 = PIN_RSVD|VAL_PIO0_0;
-#endif
-#if defined VAL_PIO0_1
- LPC_IOCON->PIO0_1 = PIN_RSVD|VAL_PIO0_1;
-#endif
-#if defined VAL_PIO0_2
- LPC_IOCON->PIO0_2 = PIN_RSVD|VAL_PIO0_2;
-#endif
-#if defined VAL_PIO0_3
- LPC_IOCON->PIO0_3 = PIN_RSVD|VAL_PIO0_3;
-#endif
-#if defined VAL_PIO0_4
- LPC_IOCON->PIO0_4 = PIN_RSVD|VAL_PIO0_4;
-#endif
-#if defined VAL_PIO0_5
- LPC_IOCON->PIO0_5 = PIN_RSVD|VAL_PIO0_5;
-#endif
-#if defined VAL_PIO0_6
- LPC_IOCON->PIO0_6 = PIN_RSVD|VAL_PIO0_6;
-#endif
-#if defined VAL_PIO0_7
- LPC_IOCON->PIO0_7 = PIN_RSVD|VAL_PIO0_7;
-#endif
-#if defined VAL_PIO0_8
- LPC_IOCON->PIO0_8 = PIN_RSVD|VAL_PIO0_8;
-#endif
-#if defined VAL_PIO0_9
- LPC_IOCON->PIO0_9 = PIN_RSVD|VAL_PIO0_9;
-#endif
-#if defined VAL_PIO0_10
- LPC_IOCON->PIO0_10 = PIN_RSVD|VAL_PIO0_10;
-#endif
-#if defined VAL_PIO0_11
- LPC_IOCON->PIO0_11 = PIN_RSVD|VAL_PIO0_11;
-#endif
-#if defined VAL_PIO0_12
- LPC_IOCON->PIO0_12 = PIN_RSVD|VAL_PIO0_12;
-#endif
-#if defined VAL_PIO0_13
- LPC_IOCON->PIO0_13 = PIN_RSVD|VAL_PIO0_13;
-#endif
-#if defined VAL_PIO0_14
- LPC_IOCON->PIO0_14 = PIN_RSVD|VAL_PIO0_14;
-#endif
-#if defined VAL_PIO0_15
- LPC_IOCON->PIO0_15 = PIN_RSVD|VAL_PIO0_15;
-#endif
-#if defined VAL_PIO0_16
- LPC_IOCON->PIO0_16 = PIN_RSVD|VAL_PIO0_16;
-#endif
-#if defined VAL_PIO0_17
- LPC_IOCON->PIO0_17 = PIN_RSVD|VAL_PIO0_17;
-#endif
-
-
-#if defined VAL_PINASSIGN0
- LPC_SWM->PINASSIGN0 = VAL_PINASSIGN0;
-#endif
-#if defined VAL_PINASSIGN1
- LPC_SWM->PINASSIGN1 = VAL_PINASSIGN1;
-#endif
-#if defined VAL_PINASSIGN2
- LPC_SWM->PINASSIGN2 = VAL_PINASSIGN2;
-#endif
-#if defined VAL_PINASSIGN3
- LPC_SWM->PINASSIGN3 = VAL_PINASSIGN3;
-#endif
-#if defined VAL_PINASSIGN4
- LPC_SWM->PINASSIGN4 = VAL_PINASSIGN4;
-#endif
-#if defined VAL_PINASSIGN5
- LPC_SWM->PINASSIGN5 = VAL_PINASSIGN5;
-#endif
-#if defined VAL_PINASSIGN6
- LPC_SWM->PINASSIGN6 = VAL_PINASSIGN6;
-#endif
-#if defined VAL_PINASSIGN7
- LPC_SWM->PINASSIGN7 = VAL_PINASSIGN7;
-#endif
-#if defined VAL_PINASSIGN8
- LPC_SWM->PINASSIGN8 = VAL_PINASSIGN8;
-#endif
-
- /* Disable clocks to IOCON & SWM */
- LPC_SYSCON->SYSAHBCLKCTRL &= ~((1<<18)|(1<<7));
-
-}
-
-
diff --git a/boards/EA_LPCXPRESSO_LPC812/board.h b/boards/EA_LPCXPRESSO_LPC812/board.h deleted file mode 100644 index 0a1618292..000000000 --- a/boards/EA_LPCXPRESSO_LPC812/board.h +++ /dev/null @@ -1,125 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for Embedded Artists LPCXpresso LPC812 board.
- */
-
-/*
- * Board identifiers.
- */
-#define BOARD_EA_LPC812
-#define BOARD_NAME "Embedded Artists LPCXpresso LPC812"
-
-/*
- * Board frequencies.
- */
-#define SYSOSCCLK 12000000
-
-
-/*
- * I/O ports initial setup, this configuration is established soon after reset
- * in the initialization code.
- * Please refer to the LPC8xx Reference Manual for details.
- */
-/* Pull-up/down */
-#define PIN_MODE_NOPULL (0<<3)
-#define PIN_MODE_PULLDOWN (1<<3)
-#define PIN_MODE_PULLUP (2<<3)
-#define PIN_MODE_REPEATER (3<<3)
-/* Hysteresis */
-#define PIN_HYS_EN (1<<5)
-/* Invert Input */
-#define PIN_INV_INPUT (1<<6)
-/* Reserved bits */
-#define PIN_RSVD (1<<7)
-/* I2C Mode */
-#define PIN_I2CMODE_STD (0<<8)
-#define PIN_I2CMODE_STDIO (1<<8)
-#define PIN_I2CMODE_FAST (2<<8)
-/* Open Drain */
-#define PIN_OPEN_DRAIN (1<<10)
-/* Input Filter Sample Clocks */
-#define PIN_SMODE_FILTER(n) ((n)<<11)
-/* Input Filter clock divider */
-#define PIN_CLKDIV_FILTER(n) ((n)<<13)
-
-/*
- * Pin definitions.
- */
-#define LED_RED 7
-#define LED_BLUE 16
-#define LED_GREEN 17
-
-
-/*
- * GPIO 0 initial setup.
- */
-/*#define VAL_PIO0_0 PIN_MODE_PULLUP*/
-/*#define VAL_PIO0_1 PIN_MODE_PULLUP*/
-/*#define VAL_PIO0_2 PIN_MODE_PULLUP*/
-/*#define VAL_PIO0_3 PIN_MODE_PULLUP*/
-/*#define VAL_PIO0_4 PIN_MODE_PULLUP*/
-/*#define VAL_PIO0_5 PIN_MODE_PULLUP*/
-/*#define VAL_PIO0_6 PIN_MODE_PULLUP*/
-#define VAL_PIO0_7 PIN_MODE_NOPULL
-/*#define VAL_PIO0_8 PIN_MODE_PULLUP*/
-/*#define VAL_PIO0_9 PIN_MODE_PULLUP*/
-/*#define VAL_PIO0_10 PIN_MODE_PULLUP*/
-/*#define VAL_PIO0_11 PIN_MODE_PULLUP*/
-/*#define VAL_PIO0_12 PIN_MODE_PULLUP*/
-/*#define VAL_PIO0_13 PIN_MODE_PULLUP*/
-/*#define VAL_PIO0_14 PIN_MODE_PULLUP*/
-/*#define VAL_PIO0_15 PIN_MODE_PULLUP*/
-#define VAL_PIO0_16 PIN_MODE_NOPULL
-#define VAL_PIO0_17 PIN_MODE_NOPULL
-
- /* UART0: TXD = P0.4, RXD = P0.0)*/
-#define VAL_PINASSIGN0 ((0xFFFF0000) | (0<<8) | (4))
-/*#define VAL_PINASSIGN1 0xFFFFFFFF*/
-/*#define VAL_PINASSIGN2 0xFFFFFFFF*/
-/*#define VAL_PINASSIGN3 0xFFFFFFFF*/
-/*#define VAL_PINASSIGN4 0xFFFFFFFF*/
-/*#define VAL_PINASSIGN5 0xFFFFFFFF*/
-/*#define VAL_PINASSIGN6 0xFFFFFFFF*/
-/*#define VAL_PINASSIGN7 0xFFFFFFFF*/
-/*#define VAL_PINASSIGN8 0xFFFFFFFF*/
-
-
-#define VAL_GPIO0DIR (PAL_PORT_BIT(LED_RED) | \
- PAL_PORT_BIT(LED_BLUE) | \
- PAL_PORT_BIT(LED_GREEN))
-
-#define VAL_GPIO0DATA (PAL_PORT_BIT(LED_RED) | \
- PAL_PORT_BIT(LED_BLUE) | \
- PAL_PORT_BIT(LED_GREEN))
-
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-
-#endif /* _BOARD_H_ */
diff --git a/boards/EA_LPCXPRESSO_LPC812/board.mk b/boards/EA_LPCXPRESSO_LPC812/board.mk deleted file mode 100644 index de80424bb..000000000 --- a/boards/EA_LPCXPRESSO_LPC812/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files.
-BOARDSRC = ${CHIBIOS}/boards/EA_LPCXPRESSO_LPC812/board.c
-
-# Required include directories
-BOARDINC = ${CHIBIOS}/boards/EA_LPCXPRESSO_LPC812
diff --git a/boards/MAPLEMINI_STM32_F103/board.c b/boards/MAPLEMINI_STM32_F103/board.c deleted file mode 100644 index 91ae5c34a..000000000 --- a/boards/MAPLEMINI_STM32_F103/board.c +++ /dev/null @@ -1,50 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-/**
- * @brief PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- * This variable is used by the HAL when initializing the PAL driver.
- */
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-const PALConfig pal_default_config =
-{
- {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH},
- {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH},
- {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH},
- {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH},
- {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH},
-};
-#endif
-
-/*
- * Early initialization code.
- * This initialization must be performed just after stack setup and before
- * any other initialization.
- */
-void __early_init(void) {
-
- stm32_clock_init();
-}
-
-/*
- * Board-specific initialization code.
- */
-void boardInit(void) {
-}
diff --git a/boards/MAPLEMINI_STM32_F103/board.h b/boards/MAPLEMINI_STM32_F103/board.h deleted file mode 100644 index 977a54bb7..000000000 --- a/boards/MAPLEMINI_STM32_F103/board.h +++ /dev/null @@ -1,137 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for the LeafLabs Maple Mini.
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_MAPLEMINI_STM32_F103
-#define BOARD_NAME "LeafLabs Maple Mini"
-
-/*
- * Board frequencies.
- */
-#define STM32_LSECLK 32768
-#define STM32_HSECLK 8000000
-
-/*
- * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
- */
-#define STM32F10X_MD
-
-/*
- * IO pins assignments.
- */
-/* Missing.*/
-
-/*
- * I/O ports initial setup, this configuration is established soon after reset
- * in the initialization code.
- *
- * The digits have the following meaning:
- * 0 - Analog input.
- * 1 - Push Pull output 10MHz.
- * 2 - Push Pull output 2MHz.
- * 3 - Push Pull output 50MHz.
- * 4 - Digital input.
- * 5 - Open Drain output 10MHz.
- * 6 - Open Drain output 2MHz.
- * 7 - Open Drain output 50MHz.
- * 8 - Digital input with PullUp or PullDown resistor depending on ODR.
- * 9 - Alternate Push Pull output 10MHz.
- * A - Alternate Push Pull output 2MHz.
- * B - Alternate Push Pull output 50MHz.
- * C - Reserved.
- * D - Alternate Open Drain output 10MHz.
- * E - Alternate Open Drain output 2MHz.
- * F - Alternate Open Drain output 50MHz.
- * Please refer to the STM32 Reference Manual for details.
- */
-
-/*
- * Port A setup.
- * Everything input with pull-up except:
- * PA2 - Alternate output (USART2 TX).
- * PA3 - Normal input (USART2 RX).
- * PA9 - Alternate output (USART1 TX).
- * PA10 - Normal input (USART1 RX).
- */
-#define VAL_GPIOACRL 0x88884B88 /* PA7...PA0 */
-#define VAL_GPIOACRH 0x888884B8 /* PA15...PA8 */
-#define VAL_GPIOAODR 0xFFFFFFFF
-
-/*
- * Port B setup.
- * Everything input with pull-up except:
- * PB1 - Push Pull output (LED).
- */
-#define VAL_GPIOBCRL 0x88888838 /* PB7...PB0 */
-#define VAL_GPIOBCRH 0x88888888 /* PB15...PB8 */
-#define VAL_GPIOBODR 0xFFFFFFFF
-
-/*
- * Port C setup.
- * Everything input with pull-up except:
- */
-#define VAL_GPIOCCRL 0x88888888 /* PC7...PC0 */
-#define VAL_GPIOCCRH 0x88888888 /* PC15...PC8 */
-#define VAL_GPIOCODR 0xFFFFFFFF
-
-/*
- * Port D setup.
- * Everything input with pull-up except:
- * PD0 - Normal input (XTAL).
- * PD1 - Normal input (XTAL).
- */
-#define VAL_GPIODCRL 0x88888844 /* PD7...PD0 */
-#define VAL_GPIODCRH 0x88888888 /* PD15...PD8 */
-#define VAL_GPIODODR 0xFFFFFFFF
-
-/*
- * Port E setup.
- * Everything input with pull-up except:
- */
-#define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */
-#define VAL_GPIOECRH 0x88888888 /* PE15...PE8 */
-#define VAL_GPIOEODR 0xFFFFFFFF
-
-/*
- * USB bus activation macro, required by the USB driver.
- */
-#define usb_lld_connect_bus(usbp) palClearPad(GPIOC, GPIOC_USB_DISC)
-
-/*
- * USB bus de-activation macro, required by the USB driver.
- */
-#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOC, GPIOC_USB_DISC)
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
diff --git a/boards/MAPLEMINI_STM32_F103/board.mk b/boards/MAPLEMINI_STM32_F103/board.mk deleted file mode 100644 index ab4b30cac..000000000 --- a/boards/MAPLEMINI_STM32_F103/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files.
-BOARDSRC = ${CHIBIOS}/boards/MAPLEMINI_STM32_F103/board.c
-
-# Required include directories
-BOARDINC = ${CHIBIOS}/boards/MAPLEMINI_STM32_F103
diff --git a/boards/NGX_BB_LPC11U14/board.c b/boards/NGX_BB_LPC11U14/board.c deleted file mode 100644 index 3f3c3d726..000000000 --- a/boards/NGX_BB_LPC11U14/board.c +++ /dev/null @@ -1,61 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-/**
- * @brief PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- * This variable is used by the HAL when initializing the PAL driver.
- */
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-const PALConfig pal_default_config = {
- {VAL_GPIO0DATA, VAL_GPIO0DIR},
- {VAL_GPIO1DATA, VAL_GPIO1DIR}
-};
-#endif
-
-/*
- * Early initialization code.
- * This initialization must be performed just after stack setup and before
- * any other initialization.
- */
-__inline void __early_init(void) {
-
- lpc_clock_init();
-}
-
-/*
- * Board-specific initialization code.
- */
-__inline void boardInit(void) {
-
- /* LCD */
- LPC_IOCON->TMS_PIO0_12 = 0x91; /* LCD_EN: GPIO - pull-up */
- LPC_IOCON->TDO_PIO0_13 = 0x81; /* LCD_RW: GPIO - No pull-up */
- LPC_IOCON->TRST_PIO0_14 = 0x81; /* LCD_RS: GPIO - No pull-up */
-
- /* USART */
- LPC_IOCON->PIO0_18 = 0x81; /* RDX: RXD - No pull-up */
- LPC_IOCON->PIO0_19 = 0x81; /* TDX: TXD - No pull-up */
-
- /* Test LEDs */
- LPC_IOCON->PIO0_22 = 0x80; /* LED_TEST1: GPIO - No pull-up */
- LPC_IOCON->PIO0_23 = 0x80; /* LED_TEST2: GPIO - No pull-up */
-
-}
-
diff --git a/boards/NGX_BB_LPC11U14/board.h b/boards/NGX_BB_LPC11U14/board.h deleted file mode 100644 index 9a59a9c44..000000000 --- a/boards/NGX_BB_LPC11U14/board.h +++ /dev/null @@ -1,125 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for NGX BlueBoard LPC11U14.
- */
-
-/*
- * Board identifiers.
- */
-#define BOARD_NGX_BB_LPC11U14
-#define BOARD_NAME "NGX BlueBoard LPC11U14"
-
-/*
- * Board frequencies.
- */
-#define SYSOSCCLK 12000000
-
-/*
- * Pin definitions.
- */
-
-/* GPIO Port0 */
-#define BUTTON_ISP_PORT GPIO0
-#define BUTTON_ISP 1
-
-#define LCD_ERD_PORT GPIO0
-#define LCD_ERD 12
-
-#define LCD_RWR_PORT GPIO0
-#define LCD_RWR 13
-
-#define LCD_RS_PORT GPIO0
-#define LCD_RS 14
-
-#define LED_PORT GPIO0
-#define LED_TEST1 22
-#define LED_TEST2 23
-
-/* GPIO Port1 */
-#define LCD_RST_PORT GPIO1
-#define LCD_RST 0
-
-#define LCD_CS_PORT GPIO1
-#define LCD_CS 13
-
-#define LCD_BL_PORT GPIO1
-#define LCD_BL 14
-#define LCD_VCCEN_PORT GPIO1
-#define LCD_VCCEN 14
-
-#define WHEEL_SENSOR_PORT GPIO0
-#define WHEEL_SENSOR 21
-
-#define LCD_DATA_PORT GPIO1
-#define LCD_D0 19
-#define LCD_D1 20
-#define LCD_D2 21
-#define LCD_D3 22
-#define LCD_D4 26
-#define LCD_D5 27
-#define LCD_D6 28
-#define LCD_D7 31
-
-#define LCD_DATA_MASK PAL_PORT_BIT(LCD_D0) | \
- PAL_PORT_BIT(LCD_D1) | \
- PAL_PORT_BIT(LCD_D2) | \
- PAL_PORT_BIT(LCD_D3) | \
- PAL_PORT_BIT(LCD_D4) | \
- PAL_PORT_BIT(LCD_D5) | \
- PAL_PORT_BIT(LCD_D6) | \
- PAL_PORT_BIT(LCD_D7)
-
-/*
- * GPIO 0 initial setup.
- */
-#define VAL_GPIO0DIR PAL_PORT_BIT(LCD_ERD) | \
- PAL_PORT_BIT(LCD_RWR) | \
- PAL_PORT_BIT(LCD_RS) | \
- PAL_PORT_BIT(LED_TEST1) | \
- PAL_PORT_BIT(LED_TEST2)
-
-#define VAL_GPIO0DATA PAL_PORT_BIT(LCD_ERD) | \
- PAL_PORT_BIT(LCD_RWR) | \
- PAL_PORT_BIT(LED_TEST1) | \
- PAL_PORT_BIT(LED_TEST2)
-
-/*
- * GPIO 1 initial setup.
- */
-#define VAL_GPIO1DIR PAL_PORT_BIT(LCD_RST) | \
- PAL_PORT_BIT(LCD_CS) | \
- PAL_PORT_BIT(LCD_BL) | \
- LCD_DATA_MASK
-
-#define VAL_GPIO1DATA 0x00000000
-
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif
-
-#endif
diff --git a/boards/NGX_BB_LPC11U14/board.mk b/boards/NGX_BB_LPC11U14/board.mk deleted file mode 100644 index 451d160dd..000000000 --- a/boards/NGX_BB_LPC11U14/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files.
-BOARDSRC = ${CHIBIOS}/boards/NGX_BB_LPC11U14/board.c
-
-# Required include directories
-BOARDINC = ${CHIBIOS}/boards/NGX_BB_LPC11U14
diff --git a/boards/NONSTANDARD_STM32F4_BARTHESS1/board.c b/boards/NONSTANDARD_STM32F4_BARTHESS1/board.c deleted file mode 100644 index 193217320..000000000 --- a/boards/NONSTANDARD_STM32F4_BARTHESS1/board.c +++ /dev/null @@ -1,83 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-/**
- * @brief PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- * This variable is used by the HAL when initializing the PAL driver.
- */
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-const PALConfig pal_default_config =
-{
- {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH},
- {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR, VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH},
- {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR, VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH},
- {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR, VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH},
- {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR, VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH},
- {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR, VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH},
- {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR, VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH},
- {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR, VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH},
- {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH}
-};
-#endif
-
-/*
- * Early initialization code.
- * This initialization must be performed just after stack setup and before
- * any other initialization.
- */
-void __early_init(void) {
-
- stm32_clock_init();
-}
-
-/*
- * Board-specific initialization code.
- */
-void boardInit(void) {
-}
-
-#if HAL_USE_SDC
-/**
- * @brief Insertion monitor function.
- *
- * @param[in] sdcp pointer to the @p SDCDriver object
- *
- * @notapi
- */
-bool_t sdc_lld_is_card_inserted(SDCDriver *sdcp) {
-
- (void)sdcp;
- return !palReadPad(GPIOE, GPIOE_SDIO_DETECT);
-}
-
-/**
- * @brief Protection detection.
- * @note Not supported, always not protected.
- *
- * @param[in] sdcp pointer to the @p SDCDriver object
- *
- * @notapi
- */
-bool_t sdc_lld_is_write_protected(SDCDriver *sdcp) {
-
- (void)sdcp;
- return FALSE;
-}
-#endif /* HAL_USE_SDC */
diff --git a/boards/NONSTANDARD_STM32F4_BARTHESS1/board.h b/boards/NONSTANDARD_STM32F4_BARTHESS1/board.h deleted file mode 100644 index 78ae3bd0e..000000000 --- a/boards/NONSTANDARD_STM32F4_BARTHESS1/board.h +++ /dev/null @@ -1,520 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for STMicroelectronics STM32F4-Discovery board.
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_NONSTANDARD_STM32F4_BARTHESS1
-#define BOARD_NAME "Hand made STM32F4x board"
-
-/*
- * Board frequencies.
- * NOTE: The LSE crystal is not fitted by default on the board.
- */
-#define STM32_LSECLK 32768
-#define STM32_HSECLK 8000000
-
-/*
- * Board voltages.
- * Required for performance limits calculation.
- */
-#define STM32_VDD 300
-
-/*
- * MCU type as defined in the ST header file stm32f4xx.h.
- */
-#define STM32F4XX
-
-/*
- * IO pins assignments.
- */
-#define GPIOA_USART2_CTS 0 /* xbee */
-#define GPIOA_USART2_RTS 1 /* xbee */
-#define GPIOA_USART2_TX 2 /* xbee */
-#define GPIOA_USART2_RX 3 /* xbee */
-#define GPIOA_SPI1_NSS 4
-#define GPIOA_SPI1_SCK 5
-#define GPIOA_SPI1_MISO 6
-#define GPIOA_SPI1_MOSI 7
-#define GPIOA_5V_DOMAIN_EN 8
-#define GPIOA_USART1_TX 9 /* gps */
-#define GPIOA_USART1_RX 10/* gps */
-#define GPIOA_OTG_FS_DM 11
-#define GPIOA_OTG_FS_DP 12
-#define GPIOA_JTMS 13
-#define GPIOA_JTCK 14
-#define GPIOA_JTDI 15
-
-#define GPIOB_RECEIVER_PPM 0
-#define GPIOB_TACHOMETER 1
-#define GPIOB_BOOT1 2
-#define GPIOB_JTDO 3
-#define GPIOB_NJTRST 4
-#define GPIOB_LED_R 6
-#define GPIOB_LED_G 7
-#define GPIOB_LED_B 8
-#define GPIOB_I2C2_SCL 10
-#define GPIOB_I2C2_SDA 11
-
-
-#define GPIOC_AN_CURRENT_SENS 0
-#define GPIOC_AN_SUPPLY_SENS 1
-#define GPIOC_AN_6V_SENS 2
-#define GPIOC_AN33_0 3
-#define GPIOC_AN33_1 4
-#define GPIOC_AN33_2 5
-#define GPIOC_SDIO_D0 8
-#define GPIOC_SDIO_D1 9
-#define GPIOC_SDIO_D2 10
-#define GPIOC_SDIO_D3 11
-#define GPIOC_SDIO_CK 12
-#define GPIOC_TAMPER_RTC 13
-#define GPIOC_OSC32_IN 14
-#define GPIOC_OSC32_OUT 15
-
-#define GPIOD_SDIO_CMD 2
-#define GPIOD_PWM1 12
-#define GPIOD_PWM2 13
-#define GPIOD_PWM3 14
-#define GPIOD_PWM4 15
-
-#define GPIOE_GPS_PPS 0
-#define GPIOE_XBEE_SLEEP 1
-#define GPIOE_XBEE_RESET 2
-#define GPIOE_SDIO_DETECT 3
-#define GPIOE_USB_DISCOVERY 4
-#define GPIOE_GPS_PWR_EN 5
-#define GPIOE_BMP085_EOC 6
-#define GPIOE_MAG_INT 7
-#define GPIOE_MMA8451_INT1 8
-#define GPIOE_PWM5 9
-#define GPIOE_ITG3200_INT 10
-#define GPIOE_PWM6 11
-#define GPIOE_PWM7 13
-#define GPIOE_PWM8 14
-#define GPIOE_MMA8451_INT2 15
-
-/*
- * I/O ports initial setup, this configuration is established soon after reset
- * in the initialization code.
- * Please refer to the STM32 Reference Manual for details.
- *
- * 1 for open drain outputs denotes hi-Z state
- */
-#define PIN_MODE_INPUT(n) (0U << ((n) * 2))
-#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2))
-#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2))
-#define PIN_MODE_ANALOG(n) (3U << ((n) * 2))
-#define PIN_OTYPE_PUSHPULL(n) (0U << (n))
-#define PIN_OTYPE_OPENDRAIN(n) (1U << (n))
-#define PIN_OSPEED_2M(n) (0U << ((n) * 2))
-#define PIN_OSPEED_25M(n) (1U << ((n) * 2))
-#define PIN_OSPEED_50M(n) (2U << ((n) * 2))
-#define PIN_OSPEED_100M(n) (3U << ((n) * 2))
-#define PIN_PUDR_FLOATING(n) (0U << ((n) * 2))
-#define PIN_PUDR_PULLUP(n) (1U << ((n) * 2))
-#define PIN_PUDR_PULLDOWN(n) (2U << ((n) * 2))
-#define PIN_AFIO_AF(n, v) ((v##U) << ((n % 8) * 4))
-
-/*
- * Port A setup.
- * All input with pull-up except:
-#define GPIOA_USART2_CTS 0 //xbee
-#define GPIOA_USART2_RTS 1 //xbee
-#define GPIOA_USART2_TX 2 //xbee
-#define GPIOA_USART2_Rx 3 //xbee
-#define GPIOA_SPI1_NSS 4
-#define GPIOA_SPI1_SCK 5
-#define GPIOA_SPI1_MISO 6
-#define GPIOA_SPI1_MOSI 7
-#define GPIOA_5V_DOMAIN_EN 8
-#define GPIOA_USART1_TX 9
-#define GPIOA_USART1_RX 10
-#define GPIOA_OTG_FS_DM 11
-#define GPIOA_OTG_FS_DP 12
-#define GPIOA_JTMS 13
-#define GPIOA_JTCK 14
-#define GPIOA_JTDI 15
- */
-
-/* default after reset 0xA8000000 */
-#define VAL_GPIOA_MODER (PIN_MODE_ALTERNATE(GPIOA_USART2_CTS) | \
- PIN_MODE_ALTERNATE(GPIOA_USART2_RTS) | \
- PIN_MODE_ALTERNATE(GPIOA_USART2_TX) | \
- PIN_MODE_ALTERNATE(GPIOA_USART2_RX) | \
- PIN_MODE_ALTERNATE(GPIOA_SPI1_NSS) | \
- PIN_MODE_ALTERNATE(GPIOA_SPI1_SCK) | \
- PIN_MODE_ALTERNATE(GPIOA_SPI1_MISO) | \
- PIN_MODE_ALTERNATE(GPIOA_SPI1_MOSI) | \
- PIN_MODE_OUTPUT(GPIOA_5V_DOMAIN_EN) | \
- PIN_MODE_ALTERNATE(GPIOA_USART1_TX) | \
- PIN_MODE_ALTERNATE(GPIOA_USART1_RX) | \
- PIN_MODE_ALTERNATE(GPIOA_OTG_FS_DM) | \
- PIN_MODE_ALTERNATE(GPIOA_OTG_FS_DP) | \
- PIN_MODE_ALTERNATE(GPIOA_JTMS) | \
- PIN_MODE_ALTERNATE(GPIOA_JTCK) | \
- PIN_MODE_ALTERNATE(GPIOA_JTDI))
-/* default 0x00000000 */
-#define VAL_GPIOA_OTYPER 0x00000000
-/* default 0x00000000 */
-#define VAL_GPIOA_OSPEEDR 0x00000000
-/* 0x64000000 */
-#define VAL_GPIOA_PUPDR (PIN_PUDR_FLOATING(GPIOA_USART2_CTS) | \
- PIN_PUDR_FLOATING(GPIOA_USART2_RTS) | \
- PIN_PUDR_FLOATING(GPIOA_USART2_TX) | \
- PIN_PUDR_FLOATING(GPIOA_USART2_RX) | \
- PIN_PUDR_PULLUP(GPIOA_SPI1_NSS) | \
- PIN_PUDR_PULLUP(GPIOA_SPI1_SCK) | \
- PIN_PUDR_PULLUP(GPIOA_SPI1_MISO) | \
- PIN_PUDR_PULLUP(GPIOA_SPI1_MOSI) | \
- PIN_PUDR_FLOATING(GPIOA_5V_DOMAIN_EN) | \
- PIN_PUDR_FLOATING(GPIOA_USART1_TX) | \
- PIN_PUDR_FLOATING(GPIOA_USART1_RX) | \
- PIN_PUDR_FLOATING(GPIOA_OTG_FS_DM) | \
- PIN_PUDR_FLOATING(GPIOA_OTG_FS_DP) | \
- PIN_PUDR_PULLUP(GPIOA_JTMS) | \
- PIN_PUDR_PULLDOWN(GPIOA_JTCK) | \
- PIN_PUDR_PULLUP(GPIOA_JTDI))
-/* 0x00000000 */
-#define VAL_GPIOA_ODR 0x00000000
-/* 0x00000000 */
-#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_USART2_CTS, 7) | \
- PIN_AFIO_AF(GPIOA_USART2_RTS, 7) | \
- PIN_AFIO_AF(GPIOA_USART2_TX, 7) | \
- PIN_AFIO_AF(GPIOA_USART2_RX, 7)| \
- PIN_AFIO_AF(GPIOA_SPI1_NSS, 5) | \
- PIN_AFIO_AF(GPIOA_SPI1_SCK, 5) | \
- PIN_AFIO_AF(GPIOA_SPI1_MISO, 5) | \
- PIN_AFIO_AF(GPIOA_SPI1_MOSI, 5))
-/* 0x00000000 */
-#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_USART1_TX, 7) | \
- PIN_AFIO_AF(GPIOA_USART1_RX, 7) | \
- PIN_AFIO_AF(GPIOA_OTG_FS_DM, 10) | \
- PIN_AFIO_AF(GPIOA_OTG_FS_DP, 10) | \
- PIN_AFIO_AF(GPIOA_JTMS, 0) | \
- PIN_AFIO_AF(GPIOA_JTCK, 0) | \
- PIN_AFIO_AF(GPIOA_JTDI, 0))
-
-/*
- * Port B setup.
-#define GPIOB_RECEIVER_PPM 0
-#define GPIOB_TACHOMETER 1
-#define GPIOB_BOOT1 2
-#define GPIOB_JTDO 3
-#define GPIOB_NJTRST 4
-#define GPIOB_LED_R 6
-#define GPIOB_LED_G 7
-#define GPIOB_LED_B 8
-#define GPIOB_I2C2_SCL 10
-#define GPIOB_I2C2_SDA 11
- */
-/* 0x00000280 */
-#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_RECEIVER_PPM) | \
- PIN_MODE_INPUT(GPIOB_TACHOMETER) | \
- PIN_MODE_INPUT(GPIOB_BOOT1) | \
- PIN_MODE_ALTERNATE(GPIOB_JTDO) | \
- PIN_MODE_ALTERNATE(GPIOB_NJTRST) | \
- PIN_MODE_INPUT(5) | \
- PIN_MODE_OUTPUT(GPIOB_LED_R) | \
- PIN_MODE_OUTPUT(GPIOB_LED_G) | \
- PIN_MODE_OUTPUT(GPIOB_LED_B) | \
- PIN_MODE_INPUT(9) | \
- PIN_MODE_ALTERNATE(GPIOB_I2C2_SCL) | \
- PIN_MODE_ALTERNATE(GPIOB_I2C2_SDA) | \
- PIN_MODE_INPUT(12) | \
- PIN_MODE_INPUT(13) | \
- PIN_MODE_INPUT(14) | \
- PIN_MODE_INPUT(15))
-/* 0x00000000 */
-#define VAL_GPIOB_OTYPER (PIN_OTYPE_OPENDRAIN(GPIOB_LED_R) | \
- PIN_OTYPE_OPENDRAIN(GPIOB_LED_G) | \
- PIN_OTYPE_OPENDRAIN(GPIOB_LED_B) | \
- PIN_OTYPE_OPENDRAIN(GPIOB_I2C2_SCL) | \
- PIN_OTYPE_OPENDRAIN(GPIOB_I2C2_SDA))
-/* 0x000000C0 */
-#define VAL_GPIOB_OSPEEDR 0x000000C0//0xAAAAAAEA
-/* 0x00000100 */
-#define VAL_GPIOB_PUPDR (PIN_PUDR_PULLDOWN(GPIOB_RECEIVER_PPM) | \
- PIN_PUDR_PULLDOWN(GPIOB_TACHOMETER) | \
- PIN_PUDR_FLOATING(GPIOB_BOOT1) | \
- PIN_PUDR_FLOATING(GPIOB_JTDO) | \
- PIN_PUDR_PULLUP(GPIOB_NJTRST) | \
- PIN_PUDR_FLOATING(5) | \
- PIN_PUDR_FLOATING(GPIOB_LED_R) | \
- PIN_PUDR_FLOATING(GPIOB_LED_G) | \
- PIN_PUDR_FLOATING(GPIOB_LED_B) | \
- PIN_PUDR_FLOATING(9) | \
- PIN_PUDR_FLOATING(GPIOB_I2C2_SCL) | \
- PIN_PUDR_FLOATING(GPIOB_I2C2_SDA) | \
- PIN_PUDR_PULLUP(12) | \
- PIN_PUDR_PULLUP(13) | \
- PIN_PUDR_PULLUP(14) | \
- PIN_PUDR_PULLUP(15))
-/* 0x00000000 */
-#define VAL_GPIOB_ODR 0x000001C0
-/* 0x00000000 */
-#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_RECEIVER_PPM, 0) | \
- PIN_AFIO_AF(GPIOB_JTDO, 0))
-/* 0x00000000 */
-#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_I2C2_SCL, 4) | \
- PIN_AFIO_AF(GPIOB_I2C2_SDA, 4))
-
-
-/*
- * Port C setup.
-#define GPIOC_AN_CURRENT_SENS 0
-#define GPIOC_AN_SUPPLY_SENS 1
-#define GPIOC_AN_6V_SENS 2
-#define GPIOC_AN33_0 3
-#define GPIOC_AN33_1 4
-#define GPIOC_AN33_2 5
-
-#define GPIOC_SDIO_D0 8
-#define GPIOC_SDIO_D1 9
-#define GPIOC_SDIO_D2 10
-#define GPIOC_SDIO_D3 11
-#define GPIOC_SDIO_CK 12
-
-#define GPIOC_TAMPER_RTC 13
-#define GPIOC_OSC32_IN 14
-#define GPIOC_OSC32_OUT 15
- */
-/* 0x00000000 */
-#define VAL_GPIOC_MODER (PIN_MODE_ANALOG(GPIOC_AN_CURRENT_SENS) | \
- PIN_MODE_ANALOG(GPIOC_AN_SUPPLY_SENS) | \
- PIN_MODE_ANALOG(GPIOC_AN_6V_SENS) | \
- PIN_MODE_ANALOG(GPIOC_AN33_0) | \
- PIN_MODE_ANALOG(GPIOC_AN33_1) | \
- PIN_MODE_ANALOG(GPIOC_AN33_2) | \
- PIN_MODE_INPUT(6) | \
- PIN_MODE_INPUT(7) | \
- PIN_MODE_ALTERNATE(GPIOC_SDIO_D0) | \
- PIN_MODE_ALTERNATE(GPIOC_SDIO_D1) | \
- PIN_MODE_ALTERNATE(GPIOC_SDIO_D2) | \
- PIN_MODE_ALTERNATE(GPIOC_SDIO_D3) | \
- PIN_MODE_ALTERNATE(GPIOC_SDIO_CK) | \
- PIN_MODE_INPUT(GPIOC_TAMPER_RTC) | \
- PIN_MODE_INPUT(GPIOC_OSC32_IN) | \
- PIN_MODE_INPUT(GPIOC_OSC32_OUT))
-
-/* 0x00000000 */
-#define VAL_GPIOC_OTYPER 0x00000000
-/* 0x00000000 */
-#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_25M(GPIOC_SDIO_D0) | \
- PIN_OSPEED_25M(GPIOC_SDIO_D1) | \
- PIN_OSPEED_25M(GPIOC_SDIO_D2) | \
- PIN_OSPEED_25M(GPIOC_SDIO_D3) | \
- PIN_OSPEED_25M(GPIOC_SDIO_CK) | \
- PIN_OSPEED_2M(GPIOC_TAMPER_RTC))
-/* 0x00000000 */
-#define VAL_GPIOC_PUPDR (PIN_PUDR_FLOATING(GPIOC_AN_CURRENT_SENS) | \
- PIN_PUDR_FLOATING(GPIOC_AN_SUPPLY_SENS) | \
- PIN_PUDR_FLOATING(GPIOC_AN_6V_SENS) | \
- PIN_PUDR_FLOATING(GPIOC_AN33_0) | \
- PIN_PUDR_FLOATING(GPIOC_AN33_1) | \
- PIN_PUDR_FLOATING(GPIOC_AN33_2) | \
- PIN_PUDR_PULLUP(6) | \
- PIN_PUDR_PULLUP(7) | \
- PIN_PUDR_PULLUP(GPIOC_SDIO_D0) | \
- PIN_PUDR_PULLUP(GPIOC_SDIO_D1) | \
- PIN_PUDR_PULLUP(GPIOC_SDIO_D2) | \
- PIN_PUDR_PULLUP(GPIOC_SDIO_D3) | \
- PIN_PUDR_PULLUP(GPIOC_SDIO_CK) | \
- PIN_PUDR_FLOATING(GPIOC_TAMPER_RTC) | \
- PIN_PUDR_FLOATING(GPIOC_OSC32_IN) | \
- PIN_PUDR_FLOATING(GPIOC_OSC32_OUT))
-/* 0x00000000 */
-#define VAL_GPIOC_ODR 0x00000000
-/* 0x00000000 */
-#define VAL_GPIOC_AFRL 0x00000000
-/* 0x00000000 */
-#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_SDIO_D0, 12) | \
- PIN_AFIO_AF(GPIOC_SDIO_D1, 12) | \
- PIN_AFIO_AF(GPIOC_SDIO_D2, 12) | \
- PIN_AFIO_AF(GPIOC_SDIO_D3, 12) | \
- PIN_AFIO_AF(GPIOC_SDIO_CK, 12))
-
-/*
- * Port D setup.
-#define GPIOD_SDIO_CMD 2
-#define GPIOD_PWM1 12
-#define GPIOD_PWM2 13
-#define GPIOD_PWM3 14
-#define GPIOD_PWM4 15
- */
-/* 0x00000000 */
-#define VAL_GPIOD_MODER (PIN_MODE_ALTERNATE(GPIOD_SDIO_CMD) | \
- PIN_MODE_ALTERNATE(GPIOD_PWM1) | \
- PIN_MODE_ALTERNATE(GPIOD_PWM2) | \
- PIN_MODE_ALTERNATE(GPIOD_PWM3) | \
- PIN_MODE_ALTERNATE(GPIOD_PWM4))
-/* 0x00000000 */
-#define VAL_GPIOD_OTYPER 0x00000000
-/* 0x00000000 */
-#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_25M(GPIOD_SDIO_CMD))
-/* 0x00000000 */
-#define VAL_GPIOD_PUPDR (PIN_PUDR_PULLUP(GPIOD_SDIO_CMD) | \
- PIN_PUDR_PULLDOWN(GPIOD_PWM1) | \
- PIN_PUDR_PULLDOWN(GPIOD_PWM2) | \
- PIN_PUDR_PULLDOWN(GPIOD_PWM3) | \
- PIN_PUDR_PULLDOWN(GPIOD_PWM4))
-/* 0x00000000 */
-#define VAL_GPIOD_ODR 0x00000000
-/* 0x00000000 */
-#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_SDIO_CMD, 12))
-/* 0x00000000 */
-#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PWM1, 2) | \
- PIN_AFIO_AF(GPIOD_PWM2, 2) | \
- PIN_AFIO_AF(GPIOD_PWM3, 2) | \
- PIN_AFIO_AF(GPIOD_PWM4, 2))
-
-
-/*
- * Port E setup.
-#define GPIOE_GPS_PPS 0
-#define GPIOE_XBEE_SLEEP 1
-#define GPIOE_XBEE_RESET 2
-#define GPIOE_SDIO_DETECT 3
-#define GPIOE_USB_DISCOVERY 4
-#define GPIOE_GPS_EN 5
-#define GPIOE_BMP085_EOC 6
-#define GPIOE_MAG_INT 7
-#define GPIOE_MMA8451_INT1 8
-#define GPIOE_PWM5 9
-#define GPIOE_ITG3200_INT 10
-#define GPIOE_PWM6 11
-#define GPIOE_TACHOMETER 12
-#define GPIOE_PWM7 13
-#define GPIOE_PWM8 14
-#define GPIOE_MMA8451_INT2 15
- */
-/* 0x00000000 */
-#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_GPS_PPS) | \
- PIN_MODE_OUTPUT(GPIOE_XBEE_SLEEP) | \
- PIN_MODE_OUTPUT(GPIOE_XBEE_RESET) | \
- PIN_MODE_INPUT(GPIOE_SDIO_DETECT) | \
- PIN_MODE_OUTPUT(GPIOE_USB_DISCOVERY) | \
- PIN_MODE_OUTPUT(GPIOE_GPS_PWR_EN) | \
- PIN_MODE_INPUT(GPIOE_BMP085_EOC) | \
- PIN_MODE_INPUT(GPIOE_MAG_INT) | \
- PIN_MODE_INPUT(GPIOE_MMA8451_INT1) | \
- PIN_MODE_ALTERNATE(GPIOE_PWM5) | \
- PIN_MODE_INPUT(GPIOE_ITG3200_INT) | \
- PIN_MODE_ALTERNATE(GPIOE_PWM6) | \
- PIN_MODE_INPUT(12) | \
- PIN_MODE_ALTERNATE(GPIOE_PWM7) | \
- PIN_MODE_ALTERNATE(GPIOE_PWM8) | \
- PIN_MODE_INPUT(GPIOE_MMA8451_INT2))
-/* 0x00000000 */
-#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_XBEE_SLEEP) | \
- PIN_OTYPE_PUSHPULL(GPIOE_XBEE_RESET) | \
- PIN_OTYPE_PUSHPULL(GPIOE_USB_DISCOVERY) | \
- PIN_OTYPE_OPENDRAIN(GPIOE_GPS_PWR_EN) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PWM5) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PWM6) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PWM7) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PWM8))
-/* 0x00000000 */
-#define VAL_GPIOE_OSPEEDR 0x00000000
-/* 0x00000000 */
-#define VAL_GPIOE_PUPDR (PIN_PUDR_PULLDOWN(GPIOE_GPS_PPS) | \
- PIN_PUDR_PULLUP(GPIOE_XBEE_SLEEP) | \
- PIN_PUDR_FLOATING(GPIOE_XBEE_RESET) | \
- PIN_PUDR_PULLUP(GPIOE_SDIO_DETECT) | \
- PIN_PUDR_FLOATING(GPIOE_USB_DISCOVERY) | \
- PIN_PUDR_FLOATING(GPIOE_GPS_PWR_EN) | \
- PIN_PUDR_PULLDOWN(GPIOE_BMP085_EOC) | \
- PIN_PUDR_PULLDOWN(GPIOE_MAG_INT) | \
- PIN_PUDR_PULLDOWN(GPIOE_MMA8451_INT1) | \
- PIN_PUDR_PULLDOWN(GPIOE_PWM5) | \
- PIN_PUDR_PULLDOWN(GPIOE_ITG3200_INT) | \
- PIN_PUDR_PULLDOWN(GPIOE_PWM6) | \
- PIN_PUDR_PULLUP(12) | \
- PIN_PUDR_PULLDOWN(GPIOE_PWM7) | \
- PIN_PUDR_PULLDOWN(GPIOE_PWM8) | \
- PIN_PUDR_PULLDOWN(GPIOE_MMA8451_INT2))
-/* 0x00000000 */
-#define VAL_GPIOE_ODR 0x30
-/* 0x00000000 */
-#define VAL_GPIOE_AFRL 0x00000000
-/* 0x00000000 */
-#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PWM5, 1) | \
- PIN_AFIO_AF(GPIOE_PWM6, 1) | \
- PIN_AFIO_AF(GPIOE_PWM7, 1) | \
- PIN_AFIO_AF(GPIOE_PWM8, 1))
-
-/*
- * Port F setup.
- */
-#define VAL_GPIOF_MODER 0x00000000
-#define VAL_GPIOF_OTYPER 0x00000000
-#define VAL_GPIOF_OSPEEDR 0x00000000
-#define VAL_GPIOF_PUPDR 0x00000000
-#define VAL_GPIOF_ODR 0x00000000
-#define VAL_GPIOF_AFRL 0x00000000
-#define VAL_GPIOF_AFRH 0x00000000
-
-/*
- * Port G setup.
- */
-#define VAL_GPIOG_MODER 0x00000000
-#define VAL_GPIOG_OTYPER 0x00000000
-#define VAL_GPIOG_OSPEEDR 0x00000000
-#define VAL_GPIOG_PUPDR 0x00000000
-#define VAL_GPIOG_ODR 0x00000000
-#define VAL_GPIOG_AFRL 0x00000000
-#define VAL_GPIOG_AFRH 0x00000000
-
-/*
- * Port H setup.
- */
-#define VAL_GPIOH_MODER 0x00000000
-#define VAL_GPIOH_OTYPER 0x00000000
-#define VAL_GPIOH_OSPEEDR 0x00000000
-#define VAL_GPIOH_PUPDR 0x00000000
-#define VAL_GPIOH_ODR 0x00000000
-#define VAL_GPIOH_AFRL 0x00000000
-#define VAL_GPIOH_AFRH 0x00000000
-
-/*
- * Port I setup.
- */
-#define VAL_GPIOI_MODER 0x00000000
-#define VAL_GPIOI_OTYPER 0x00000000
-#define VAL_GPIOI_OSPEEDR 0x00000000
-#define VAL_GPIOI_PUPDR 0x00000000
-#define VAL_GPIOI_ODR 0x00000000
-#define VAL_GPIOI_AFRL 0x00000000
-#define VAL_GPIOI_AFRH 0x00000000
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
diff --git a/boards/NONSTANDARD_STM32F4_BARTHESS1/board.mk b/boards/NONSTANDARD_STM32F4_BARTHESS1/board.mk deleted file mode 100644 index 8f50edf14..000000000 --- a/boards/NONSTANDARD_STM32F4_BARTHESS1/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files.
-BOARDSRC = $(CHIBIOS)/boards/NONSTANDARD_STM32F4_BARTHESS1/board.c
-
-# Required include directories
-BOARDINC = $(CHIBIOS)/boards/NONSTANDARD_STM32F4_BARTHESS1
diff --git a/boards/OLIMEX_AVR_CAN/board.c b/boards/OLIMEX_AVR_CAN/board.c deleted file mode 100644 index f7e458d9b..000000000 --- a/boards/OLIMEX_AVR_CAN/board.c +++ /dev/null @@ -1,90 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-/**
- * @brief PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- * This variable is used by the HAL when initializing the PAL driver.
- */
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-const PALConfig pal_default_config =
-{
-#if defined(PORTA)
- {VAL_PORTA, VAL_DDRA},
-#endif
-#if defined(PORTB)
- {VAL_PORTB, VAL_DDRB},
-#endif
-#if defined(PORTC)
- {VAL_PORTC, VAL_DDRC},
-#endif
-#if defined(PORTD)
- {VAL_PORTD, VAL_DDRD},
-#endif
-#if defined(PORTE)
- {VAL_PORTE, VAL_DDRE},
-#endif
-#if defined(PORTF)
- {VAL_PORTF, VAL_DDRF},
-#endif
-#if defined(PORTG)
- {VAL_PORTG, VAL_DDRG},
-#endif
-};
-#endif /* HAL_USE_PAL */
-
-CH_IRQ_HANDLER(TIMER0_COMP_vect) {
-
- CH_IRQ_PROLOGUE();
-
- chSysLockFromIsr();
- chSysTimerHandlerI();
- chSysUnlockFromIsr();
-
- CH_IRQ_EPILOGUE();
-}
-
-/*
- * Board-specific initialization code.
- */
-void boardInit(void) {
-
- /*
- * External interrupts setup, all disabled initially.
- */
- EICRA = 0x00;
- EICRB = 0x00;
- EIMSK = 0x00;
-
- /*
- * Enables Idle mode for SLEEP instruction.
- */
- SMCR = (1 << SE);
-
- /*
- * Timer 0 setup.
- */
- TCCR0A = (1 << WGM01) | (0 << WGM00) | /* CTC mode. */
- (0 << COM0A1) | (0 << COM0A0) | /* OC0A disabled. */
- (0 << CS02) | (1 << CS01) | (1 << CS00); /* CLK/64 clock. */
- OCR0A = F_CPU / 64 / CH_FREQUENCY - 1;
- TCNT0 = 0; /* Reset counter. */
- TIFR0 = (1 << OCF0A); /* Reset pending. */
- TIMSK0 = (1 << OCIE0A); /* IRQ on compare. */
-}
diff --git a/boards/OLIMEX_AVR_CAN/board.h b/boards/OLIMEX_AVR_CAN/board.h deleted file mode 100644 index 4d674756e..000000000 --- a/boards/OLIMEX_AVR_CAN/board.h +++ /dev/null @@ -1,99 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for the Olimex AVR-CAN proto board.
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_OLIMEX_AVR_CAN
-#define BOARD_NAME "Olimex AVR-CAN"
-
-/*
- * All inputs with pullups.
- */
-#define VAL_DDRA 0x00
-#define VAL_PORTA 0xFF
-
-/*
- * All inputs with pullups.
- */
-#define VAL_DDRB 0x00
-#define VAL_PORTB 0xFF
-
-/*
- * All inputs with pullups.
- */
-#define VAL_DDRC 0x00
-#define VAL_PORTC 0xFF
-
-/* PD7 PD6 PD5 PD4 PD3 PD2 PD1 PD0
- * IN IN OUT IN OUT IN IN IN
- * DDRD 0 0 1 0 1 0 0 0
- * PU HiZ VAL PU VAL HiZ HiZ HiZ
- * PORTD 1 0 ?1 1 1 0 0 0
- */
-#define VAL_DDRD 0x28
-#define VAL_PORTD 0xB8
-
-/* PE7 PE6 BUT LED PE3 PE2 PE1 PE0
- * IN IN IN OUT IN IN OUT IN
- * DDRE 0 0 0 1 0 0 1 0
- * PU PU HiZ VAL PU PU VAL HiZ
- * PORTE 1 1 0 1 1 1 1 0
- */
-#define VAL_DDRE 0x12
-#define VAL_PORTE 0xDE
-
-/* TDI TDO TMS TCK PF3 PF2 PF1 PF0
- * x x x x IN IN IN IN
- * DDRF 0 0 0 0 0 0 0 0
- * x x x x PU PU PU PU
- * PORTF 0 0 0 0 1 1 1 1
- *
- */
-#define VAL_DDRF 0x00
-#define VAL_PORTF 0x0F
-
-/* x x x x x PG2 PG1 PG0
- * x x x x x IN IN IN
- * DDRG 0 0 0 0 0 0 0 0
- * x x x x x PU PU PU
- * PORTG 0 0 0 0 0 1 1 1
- *
- */
-#define VAL_DDRG 0x00
-#define VAL_PORTG 0x07
-
-#define PORTE_LED 4
-#define PORTE_BUTTON 5
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
diff --git a/boards/OLIMEX_AVR_CAN/board.mk b/boards/OLIMEX_AVR_CAN/board.mk deleted file mode 100644 index 4d2d406ad..000000000 --- a/boards/OLIMEX_AVR_CAN/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files.
-BOARDSRC = ${CHIBIOS}/boards/OLIMEX_AVR_CAN/board.c
-
-# Required include directories
-BOARDINC = ${CHIBIOS}/boards/OLIMEX_AVR_CAN
diff --git a/boards/OLIMEX_AVR_MT_128/board.c b/boards/OLIMEX_AVR_MT_128/board.c deleted file mode 100644 index ff1ee85e8..000000000 --- a/boards/OLIMEX_AVR_MT_128/board.c +++ /dev/null @@ -1,93 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-/**
- * @brief PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- * This variable is used by the HAL when initializing the PAL driver.
- */
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-const PALConfig pal_default_config =
-{
-#if defined(PORTA)
- {VAL_PORTA, VAL_DDRA},
-#endif
-#if defined(PORTB)
- {VAL_PORTB, VAL_DDRB},
-#endif
-#if defined(PORTC)
- {VAL_PORTC, VAL_DDRC},
-#endif
-#if defined(PORTD)
- {VAL_PORTD, VAL_DDRD},
-#endif
-#if defined(PORTE)
- {VAL_PORTE, VAL_DDRE},
-#endif
-#if defined(PORTF)
- {VAL_PORTF, VAL_DDRF},
-#endif
-#if defined(PORTG)
- {VAL_PORTG, VAL_DDRG},
-#endif
-};
-#endif /* HAL_USE_PAL */
-
-/**
- * @brief Timer0 interrupt handler.
- */
-CH_IRQ_HANDLER(TIMER0_COMP_vect) {
-
- CH_IRQ_PROLOGUE();
-
- chSysLockFromIsr();
- chSysTimerHandlerI();
- chSysUnlockFromIsr();
-
- CH_IRQ_EPILOGUE();
-}
-
-/**
- * Board-specific initialization code.
- */
-void boardInit(void) {
-
- /*
- * External interrupts setup, all disabled initially.
- */
- EICRA = 0x00;
- EICRB = 0x00;
- EIMSK = 0x00;
-
- /*
- * Enables Idle mode for SLEEP instruction.
- */
- MCUCR = (1 << SE);
-
- /*
- * Timer 0 setup.
- */
- TCCR0 = (1 << WGM01) | (0 << WGM00) | /* CTC mode. */
- (0 << COM01) | (0 << COM00) | /* OC0A disabled. */
- (1 << CS02) | (0 << CS01) | (0 << CS00); /* CLK/64 clock. */
- OCR0 = F_CPU / 64 / CH_FREQUENCY - 1;
- TCNT0 = 0; /* Reset counter. */
- TIFR = (1 << OCF0); /* Reset pending. */
- TIMSK = (1 << OCIE0); /* IRQ on compare. */
-}
diff --git a/boards/OLIMEX_AVR_MT_128/board.h b/boards/OLIMEX_AVR_MT_128/board.h deleted file mode 100644 index 3c99f9d53..000000000 --- a/boards/OLIMEX_AVR_MT_128/board.h +++ /dev/null @@ -1,124 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for the Olimex AVR-MT-128 proto board.
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_OLIMEX_AVR_MT_128
-#define BOARD_NAME "Olimex AVR-MT-128"
-
-/* PA7 RLY DS B5 B4 B3 B2 B1
- * IN OUT IN IN IN IN IN IN
- * DDRA 0 1 0 0 0 0 0 0
- * PU VAL HiZ HiZ HiZ HiZ HiZ HiZ
- * PORTA 1 0 0 0 0 0 0 0
- */
-#define VAL_DDRA 0x40
-#define VAL_PORTA 0x80
-
-/*
- * All inputs with pullups.
- */
-#define VAL_DDRB 0x00
-#define VAL_PORTB 0xFF
-
-/* D7 D6 D5 D4 PC3 E R/W RS
- * OUT OUT OUT OUT IN OUT OUT OUT
- * DDRC 1 1 1 1 0 1 1 1
- * PU PU PU PU PU VAL VAL VAL
- * PORTC 0 0 0 0 1 0 0 0
- */
-#define VAL_DDRC 0xF7
-#define VAL_PORTC 0x08
-
-/* PD7 PD6 PD5 PD4 TXD RXD PD1 PD0
- * IN IN IN IN OUT IN IN IN
- * DDRD 0 0 0 0 1 0 0 0
- * PU PU PU PU VAL HiZ PU PU
- * PORTD 1 1 1 1 1 0 1 1
- */
-#define VAL_DDRD 0x08
-#define VAL_PORTD 0xFB
-
-/* PE7 PE6 BZ2 BZ2 PE3 PE2 PE1 PE0
- * IN IN OUT OUT IN IN OUT IN
- * DDRE 0 0 1 1 0 0 1 0
- * PU PU VAL VAL PU PU VAL PU
- * PORTE 1 1 1 1 1 1 1 1
- */
-#define VAL_DDRE 0x32
-#define VAL_PORTE 0xFF
-
-/* TDI TDO TMS TCK PF3 PF2 PF1 PF0
- * x x x x IN IN IN IN
- * DDRF 0 0 0 0 0 0 0 0
- * x x x x PU PU PU PU
- * PORTF 0 0 0 0 1 1 1 1
- *
- */
-#define VAL_DDRF 0x00
-#define VAL_PORTF 0x0F
-
-/* x x x x x PG2 PG1 PG0
- * x x x x x IN IN IN
- * DDRG 0 0 0 0 0 0 0 0
- * x x x x x PU PU PU
- * PORTG 0 0 0 0 0 1 1 1
- *
- */
-#define VAL_DDRG 0x00
-#define VAL_PORTG 0x07
-
-
-#define PORTA_BUTTON1 0
-#define PORTA_BUTTON2 1
-#define PORTA_BUTTON3 2
-#define PORTA_BUTTON4 3
-#define PORTA_BUTTON5 4
-#define PORTA_DALLAS 5
-#define PORTA_RELAY 6
-
-#define PORTC_44780_RS_MASK (1 << 0)
-#define PORTC_44780_RW_MASK (1 << 1)
-#define PORTC_44780_E_MASK (1 << 2)
-#define PORTC_44780_D4_MASK (1 << 4)
-#define PORTC_44780_D5_MASK (1 << 5)
-#define PORTC_44780_D6_MASK (1 << 6)
-#define PORTC_44780_D7_MASK (1 << 7)
-#define PORTC_44780_DATA_MASK (PORTC_44780_D4_MASK | PORTC_44780_D5_MASK | \
- PORTC_44780_D6_MASK | PORTC_44780_D7_MASK)
-
-#define PORTE_BUZZ1 (1 << 4)
-#define PORTE_BUZZ2 (1 << 5)
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
diff --git a/boards/OLIMEX_AVR_MT_128/board.mk b/boards/OLIMEX_AVR_MT_128/board.mk deleted file mode 100644 index 7b903ffec..000000000 --- a/boards/OLIMEX_AVR_MT_128/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files.
-BOARDSRC = ${CHIBIOS}/boards/OLIMEX_AVR_MT_128/board.c
-
-# Required include directories
-BOARDINC = ${CHIBIOS}/boards/OLIMEX_AVR_MT_128
diff --git a/boards/OLIMEX_LPC-P1227/board.c b/boards/OLIMEX_LPC-P1227/board.c deleted file mode 100644 index 09bb82e7b..000000000 --- a/boards/OLIMEX_LPC-P1227/board.c +++ /dev/null @@ -1,54 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-/**
- * @brief PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- * This variable is used by the HAL when initializing the PAL driver.
- */
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-const PALConfig pal_default_config = {
- {VAL_GPIO0DATA, VAL_GPIO0DIR},
- {VAL_GPIO1DATA, VAL_GPIO1DIR},
- {VAL_GPIO2DATA, VAL_GPIO2DIR},
-};
-#endif
-
-/*
- * Early initialization code.
- * This initialization must be performed just after stack setup and before
- * any other initialization.
- */
-void __early_init(void) {
-
- lpc122x_clock_init();
-}
-
-/*
- * Board-specific initialization code.
- */
-void boardInit(void) {
-
- /*
- * Extra, board-specific, initializations.
- */
- LPC_IOCON->PIO1_4 = 0x80; /* Disables pull-up on LED2 output. */
- LPC_IOCON->PIO1_5 = 0x80; /* Disables pull-up on LED1 output */
- LPC_IOCON->PIO1_6 = 0x80; /* Disables pull-up on Buzzer output */
-}
diff --git a/boards/OLIMEX_LPC-P1227/board.h b/boards/OLIMEX_LPC-P1227/board.h deleted file mode 100644 index ae2e879a7..000000000 --- a/boards/OLIMEX_LPC-P1227/board.h +++ /dev/null @@ -1,98 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
- 2011,2012,2013 Giovanni Di Sirio.
-
- This file is part of ChibiOS/RT.
-
- ChibiOS/RT is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- ChibiOS/RT is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for Olimex LPC-P1227 board.
- *
- */
-
-/*
- * Board identifiers.
- */
-#define OLIMEX_LPC_P1227
-#define BOARD_NAME "Olimex LPC-P1227"
-
-/*
- * Board frequencies.
- */
-#define SYSOSCCLK 12000000
-
-
-/*
- * GPIO 0 initial setup.
- */
-#define VAL_GPIO0DIR 0x00000000
-#define VAL_GPIO0DATA 0x00000000
-
-/*
- * GPIO 1 initial setup.
- */
-#define VAL_GPIO1DIR PAL_PORT_BIT(GPIO1_LED1) | \
- PAL_PORT_BIT(GPIO1_LED2) | \
- PAL_PORT_BIT(GPIO1_BUZZER)
-
-#define VAL_GPIO1DATA PAL_PORT_BIT(GPIO1_LED1)
-
-
-/*
- * GPIO 2 initial setup.
- */
-#define VAL_GPIO2DIR PAL_PORT_BIT(GPIO2_LCD_DC) | \
- PAL_PORT_BIT(GPIO2_LCD_SS) | \
- PAL_PORT_BIT(GPIO2_LCD_RES)
-#define VAL_GPIO2DATA PAL_PORT_BIT(GPIO2_LCD_SS)
-
-
-/*
- * Pin definitions.
- */
-
-#define GPIO1_LED1 5
-#define GPIO1_LED2 4
-#define GPIO1_SW_WAKEUP 3
-#define GPIO1_BUZZER 6
-
-#define GPIO2_SW_USER1 12
-#define GPIO2_SW_USER2 11
-#define GPIO2_SW_USER3 10
-#define GPIO2_LCD_DC 15
-#define GPIO2_LCD_SS 14
-#define GPIO2_LCD_RES 13
-
-/* LCD3310 pins */
-#define LCD3310_RES_PIN GPIO2_LCD_RES
-#define LCD3310_RES_PORT GPIO2
-#define LCD3310_DC_PIN GPIO2_LCD_DC
-#define LCD3310_DC_PORT GPIO2
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
diff --git a/boards/OLIMEX_LPC-P1227/board.mk b/boards/OLIMEX_LPC-P1227/board.mk deleted file mode 100644 index 090251880..000000000 --- a/boards/OLIMEX_LPC-P1227/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files.
-BOARDSRC = ${CHIBIOS}/boards/OLIMEX_LPC-P1227/board.c
-
-# Required include directories
-BOARDINC = ${CHIBIOS}/boards/OLIMEX_LPC-P1227
diff --git a/boards/OLIMEX_LPC_P1343/board.c b/boards/OLIMEX_LPC_P1343/board.c deleted file mode 100644 index a0757d587..000000000 --- a/boards/OLIMEX_LPC_P1343/board.c +++ /dev/null @@ -1,52 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-/**
- * @brief PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- * This variable is used by the HAL when initializing the PAL driver.
- */
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-const PALConfig pal_default_config = {
- {VAL_GPIO0DATA, VAL_GPIO0DIR},
- {VAL_GPIO1DATA, VAL_GPIO1DIR},
- {VAL_GPIO2DATA, VAL_GPIO2DIR},
- {VAL_GPIO3DATA, VAL_GPIO3DIR},
-};
-#endif
-
-/*
- * Early initialization code.
- * This initialization must be performed just after stack setup and before
- * any other initialization.
- */
-void __early_init(void) {
-
- LPC13xx_clock_init();
-}
-
-/*
- * Board-specific initialization code.
- */
-void boardInit(void) {
-
- /*
- * Extra, board-specific, initializations.
- */
-}
diff --git a/boards/OLIMEX_LPC_P1343/board.h b/boards/OLIMEX_LPC_P1343/board.h deleted file mode 100644 index ca7934f4d..000000000 --- a/boards/OLIMEX_LPC_P1343/board.h +++ /dev/null @@ -1,104 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for the Olimex LPC-P1343 proto board.
- */
-
-/*
- * Board identifiers.
- */
-#define BOARD_OLIMEX_LPC_P1343
-#define BOARD_NAME "Olimex LPC-P1343"
-
-/*
- * Board frequencies.
- */
-#define SYSOSCCLK 12000000
-
-/*
- * GPIO 0 initial setup.
- */
-#define VAL_GPIO0DIR 0x00000000
-#define VAL_GPIO0DATA 0x00000000
-
-/*
- * GPIO 1 initial setup.
- */
-#define VAL_GPIO1DIR PAL_PORT_BIT(GPIO1_SW2)
-
-#define VAL_GPIO1DATA PAL_PORT_BIT(GPIO1_SW2)
-
-/*
- * GPIO 2 initial setup.
- */
-
-#define VAL_GPIO2DIR PAL_PORT_BIT(GPIO2_SW1) | \
- PAL_PORT_BIT(GPIO2_LED5) | \
- PAL_PORT_BIT(GPIO2_LED6) | \
- PAL_PORT_BIT(GPIO2_LED7) | \
- PAL_PORT_BIT(GPIO2_LED8)
-
-#define VAL_GPIO2DATA PAL_PORT_BIT(GPIO2_LED5) | \
- PAL_PORT_BIT(GPIO2_LED6) | \
- PAL_PORT_BIT(GPIO2_LED7) | \
- PAL_PORT_BIT(GPIO2_LED8)
-
-/*
- * GPIO 3 initial setup.
- */
-
-#define VAL_GPIO3DIR PAL_PORT_BIT(GPIO3_LED1) | \
- PAL_PORT_BIT(GPIO3_LED2) | \
- PAL_PORT_BIT(GPIO3_LED3) | \
- PAL_PORT_BIT(GPIO3_LED4)
-
-#define VAL_GPIO3DATA PAL_PORT_BIT(GPIO3_LED1) | \
- PAL_PORT_BIT(GPIO3_LED2) | \
- PAL_PORT_BIT(GPIO3_LED3) | \
- PAL_PORT_BIT(GPIO3_LED4)
-
-/*
- * Pin definitions.
- */
-#define GPIO1_SW2 4
-#define GPIO1_SPI0SEL 11
-
-#define GPIO2_SW1 9
-
-#define GPIO3_LED1 0
-#define GPIO3_LED2 1
-#define GPIO3_LED3 2
-#define GPIO3_LED4 3
-#define GPIO2_LED5 4
-#define GPIO2_LED6 5
-#define GPIO2_LED7 6
-#define GPIO2_LED8 7
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
diff --git a/boards/OLIMEX_LPC_P1343/board.mk b/boards/OLIMEX_LPC_P1343/board.mk deleted file mode 100644 index 718cc6e29..000000000 --- a/boards/OLIMEX_LPC_P1343/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files.
-BOARDSRC = ${CHIBIOS}/boards/OLIMEX_LPC_P1343/board.c
-
-# Required include directories
-BOARDINC = ${CHIBIOS}/boards/OLIMEX_LPC_P1343
diff --git a/boards/OLIMEX_LPC_P2148/board.c b/boards/OLIMEX_LPC_P2148/board.c deleted file mode 100644 index 1c0a00302..000000000 --- a/boards/OLIMEX_LPC_P2148/board.c +++ /dev/null @@ -1,95 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-#define VAL_TC0_PRESCALER 0
-
-/**
- * @brief PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- * This variable is used by the HAL when initializing the PAL driver.
- */
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-const PALConfig pal_default_config =
-{
- VAL_PINSEL0,
- VAL_PINSEL1,
- VAL_PINSEL2,
- {VAL_FIO0PIN, VAL_FIO0DIR},
- {VAL_FIO1PIN, VAL_FIO1DIR}
-};
-#endif
-
-/*
- * Timer 0 IRQ handling here.
- */
-static CH_IRQ_HANDLER(T0IrqHandler) {
-
- CH_IRQ_PROLOGUE();
- T0IR = 1; /* Clear interrupt on match MR0. */
-
- chSysLockFromIsr();
- chSysTimerHandlerI();
- chSysUnlockFromIsr();
-
- VICVectAddr = 0;
- CH_IRQ_EPILOGUE();
-}
-
-/*
- * Early initialization code.
- * This initialization must be performed just after stack setup and before
- * any other initialization.
- */
-void __early_init(void) {
-
- lpc214x_clock_init();
-}
-
-#if HAL_USE_MMC_SPI
-/* Board-related functions related to the MMC_SPI driver.*/
-bool_t mmc_lld_is_card_inserted(MMCDriver *mmcp) {
-
- (void)mmcp;
- return !palReadPad(IOPORT2, PB_CP1);
-}
-
-bool_t mmc_lld_is_write_protected(MMCDriver *mmcp) {
-
- (void)mmcp;
- return palReadPad(IOPORT2, PB_WP1);
-}
-#endif
-
-/*
- * Board-specific initialization code.
- */
-void boardInit(void) {
-
- /*
- * System Timer initialization, 1ms intervals.
- */
- SetVICVector(T0IrqHandler, 0, SOURCE_Timer0);
- VICIntEnable = INTMASK(SOURCE_Timer0);
- TC *timer = T0Base;
- timer->TC_PR = VAL_TC0_PRESCALER;
- timer->TC_MR0 = (PCLK / CH_FREQUENCY) / (VAL_TC0_PRESCALER + 1);
- timer->TC_MCR = 3; /* Interrupt and clear TC on match MR0. */
- timer->TC_TCR = 2; /* Reset counter and prescaler. */
- timer->TC_TCR = 1; /* Timer enabled. */
-}
diff --git a/boards/OLIMEX_LPC_P2148/board.h b/boards/OLIMEX_LPC_P2148/board.h deleted file mode 100644 index 17651b313..000000000 --- a/boards/OLIMEX_LPC_P2148/board.h +++ /dev/null @@ -1,92 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for the Olimex LPC-P2148 proto board.
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_OLIMEX_LPC_P2148
-#define BOARD_NAME "Olimex LPC-P2148"
-
-/*
- * The following values are implementation dependent. You may change them in
- * order to match your HW.
- */
-#define FOSC 12000000
-#define CCLK 48000000
-#define PCLK 12000000
-
-/*
- * Pins configuration for Olimex LPC-P2148.
- *
- * PINSEL0
- * P0 P0 P0 P0 P0 P0 RXD TXD SSE MOS MIS SCK SDA SCL RXD TXD
- * 15 14 13 12 11 10 1 1 L0 I0 O0 0 0 0 0 0
- * 00 00 00 00 00 00 01 01 01 01 01 01 01 01 01 01
- * FIO0DIR (15...0)
- * IN IN OUT OUT OUT OUT -- -- -- -- -- -- -- -- -- --
- * 0 0 1 1 1 1 0 0 0 0 0 0 0 0 0 0
- *
- * PINSEL1
- * P0 AD P0 P0 -- -- AO -- VB P0 P0 P0 MOS MIS SCK P0
- * 31 03 29 28 -- -- UT -- US 22 21 20 I1 O1 1 16
- * 00 01 00 00 00 00 10 00 01 00 00 00 10 10 10 00
- * FIO0DIR (31...16)
- * OUT -- OUT OUT -- -- -- -- -- OUT OUT OUT -- -- -- IN
- * 1 0 1 1 0 0 0 0 0 1 1 1 0 0 0 0
- *
- * FIO1DIR (31...16)
- * -- -- -- -- -- IN IN OUT OUT OUT OUT OUT OUT OUT OUT OUT
- * 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1
- */
-#define VAL_PINSEL0 0x00055555
-#define VAL_PINSEL1 0x100840A8
-#define VAL_PINSEL2 0x00000004 /* Do not modify */
-#define VAL_FIO0DIR 0xB0703C00
-#define VAL_FIO1DIR 0x01FF0000
-#define VAL_FIO0PIN 0xFFFFFFFF
-#define VAL_FIO1PIN 0xFFFFFFFF
-
-#define PA_LED1 10
-#define PA_LED2 11
-#define PA_BUZZ1 12
-#define PA_BUZZ2 13
-#define PA_BSL 14
-#define PA_BUTTON1 15
-#define PA_BUTTON2 16
-#define PA_SSEL1 20
-#define PA_LEDUSB 31
-
-#define PB_WP1 24
-#define PB_CP1 25
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
diff --git a/boards/OLIMEX_LPC_P2148/board.mk b/boards/OLIMEX_LPC_P2148/board.mk deleted file mode 100644 index 5d0937e6d..000000000 --- a/boards/OLIMEX_LPC_P2148/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the mandatory board related files.
-BOARDSRC = ${CHIBIOS}/boards/OLIMEX_LPC_P2148/board.c
-
-# Required include directories
-BOARDINC = ${CHIBIOS}/boards/OLIMEX_LPC_P2148
diff --git a/boards/OLIMEX_LPC_P2148/buzzer.c b/boards/OLIMEX_LPC_P2148/buzzer.c deleted file mode 100644 index cf2182f08..000000000 --- a/boards/OLIMEX_LPC_P2148/buzzer.c +++ /dev/null @@ -1,111 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/*
- * Buzzer driver for Olimex LPC-P2148.
- * Uses the timer 1 for wave generation and a Virtual Timer for the sound
- * duration.
- * The driver also generates an event when the sound is done and the buzzer
- * goes silent.
- */
-
-#include "ch.h"
-#include "hal.h"
-
-#include "buzzer.h"
-
-EventSource BuzzerSilentEventSource;
-
-#define StartCounter(t) ((t)->TC_EMR = 0xF1, (t)->TC_TCR = 1)
-#define StopCounter(t) ((t)->TC_EMR = 0, (t)->TC_TCR = 2)
-
-/**
- * @brief Buzzer driver initialization.
- */
-void buzzInit(void) {
-
- chEvtInit(&BuzzerSilentEventSource);
-
- /*
- * Switches P0.12 and P0.13 to MAT1.0 and MAT1.1 functions.
- * Enables Timer1 clock.
- */
- PINSEL0 &= 0xF0FFFFFF;
- PINSEL0 |= 0x0A000000;
- PCONP = (PCONP & PCALL) | PCTIM1;
-
- /*
- * Timer setup.
- */
- TC *tc = T1Base;
- StopCounter(tc);
- tc->TC_CTCR = 0; /* Clock source is PCLK. */
- tc->TC_PR = 0; /* Prescaler disabled. */
- tc->TC_MCR = 2; /* Clear TC on match MR0. */
-}
-
-/**
- * @brief Stops the sound.
- *
- * @param[in] p pointer to the timer
- */
-static void stop(void *p) {
-
- StopCounter((TC *)p);
- chSysLockFromIsr();
- chEvtBroadcastI(&BuzzerSilentEventSource);
- chSysUnlockFromIsr();
-}
-
-/**
- * @brief Plays a tone asynchronously.
- *
- * @param[in] freq approximated tone frequency
- * @param[in] duration tone duration in systicks
- */
-void buzzPlay(uint32_t freq, systime_t duration) {
- static VirtualTimer bvt;
- TC *tc = T1Base;
-
- chSysLock();
-
- if (chVTIsArmedI(&bvt)) { /* If a sound is already being */
- chVTResetI(&bvt); /* played then aborts it. */
- StopCounter(tc);
- }
-
- tc->TC_MR0 = tc->TC_MR1 = (PCLK / (freq * 2));
- StartCounter(tc);
- chVTSetI(&bvt, duration, stop, tc);
-
- chSysUnlock();
-}
-
-/**
- * @brief Plays a tone.
- *
- * @param[in] freq approximated tone frequency
- * @param[in] duration tone duration in systicks
- */
-void buzzPlayWait(uint32_t freq, systime_t duration) {
- TC *tc = T1Base;
-
- StopCounter(tc);
- tc->TC_MR0 = tc->TC_MR1 = (PCLK / (freq * 2));
- StartCounter(tc);
- chThdSleep(duration);
- StopCounter(tc);
-}
diff --git a/boards/OLIMEX_LPC_P2148/buzzer.h b/boards/OLIMEX_LPC_P2148/buzzer.h deleted file mode 100644 index 82f573902..000000000 --- a/boards/OLIMEX_LPC_P2148/buzzer.h +++ /dev/null @@ -1,32 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BUZZER_H_
-#define _BUZZER_H_
-
-#ifdef __cplusplus
-extern "C" {
-#endif
- void buzzInit(void);
- void buzzPlay(uint32_t freq, systime_t duration);
- void buzzPlayWait(uint32_t freq, systime_t duration);
-#ifdef __cplusplus
-}
-#endif
-
-extern EventSource BuzzerSilentEventSource;
-
-#endif /* _BUZZER_H_ */
diff --git a/boards/OLIMEX_MSP430_P1611/board.c b/boards/OLIMEX_MSP430_P1611/board.c deleted file mode 100644 index bf89db001..000000000 --- a/boards/OLIMEX_MSP430_P1611/board.c +++ /dev/null @@ -1,80 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-/**
- * @brief PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- * This variable is used by the HAL when initializing the PAL driver.
- */
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-const PALConfig pal_default_config =
-{
-#if defined(__MSP430_HAS_PORT1__) || defined(__MSP430_HAS_PORT1_R__)
- {VAL_P1OUT, VAL_P1DIR},
-#endif
-#if defined(__MSP430_HAS_PORT2__) || defined(__MSP430_HAS_PORT2_R__)
- {VAL_P2OUT, VAL_P2DIR},
-#endif
-#if defined(__MSP430_HAS_PORT3__) || defined(__MSP430_HAS_PORT3_R__)
- {VAL_P3OUT, VAL_P3DIR},
-#endif
-#if defined(__MSP430_HAS_PORT4__) || defined(__MSP430_HAS_PORT4_R__)
- {VAL_P4OUT, VAL_P4DIR},
-#endif
-#if defined(__MSP430_HAS_PORT5__) || defined(__MSP430_HAS_PORT5_R__)
- {VAL_P5OUT, VAL_P5DIR},
-#endif
-#if defined(__MSP430_HAS_PORT6__) || defined(__MSP430_HAS_PORT6_R__)
- {VAL_P6OUT, VAL_P6DIR},
-#endif
-};
-#endif
-
-CH_IRQ_HANDLER(TIMERA0) {
-
- CH_IRQ_PROLOGUE();
-
- chSysLockFromIsr();
- chSysTimerHandlerI();
- chSysUnlockFromIsr();
-
- CH_IRQ_EPILOGUE();
-}
-
-/*
- * Board-specific initialization code.
- */
-void boardInit(void) {
-
-#if USE_MSP430_USART0
- P3SEL |= (1 << 4) | (1 << 5);
-#endif
-
-#if USE_MSP430_USART1
- P3SEL |= (1 << 6) | (1 << 7);
-#endif
-
- /*
- * Timer 0 setup, uses SMCLK as source.
- */
- TACCR0 = SMCLK / 4 / CH_FREQUENCY - 1;/* Counter limit. */
- TACTL = TACLR; /* Clean start. */
- TACTL = TASSEL_2 | ID_2 | MC_1; /* Src=SMCLK, ID=4, cmp=TACCR0. */
- TACCTL0 = CCIE; /* Interrupt on compare. */
-}
diff --git a/boards/OLIMEX_MSP430_P1611/board.h b/boards/OLIMEX_MSP430_P1611/board.h deleted file mode 100644 index e28b85bf5..000000000 --- a/boards/OLIMEX_MSP430_P1611/board.h +++ /dev/null @@ -1,80 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for the Olimex MSP430-P1611 proto board.
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_OLIMEX_MSP430_P1611
-#define BOARD_NAME "Olimex MSP430-P1611"
-
-/*
- * Clock constants.
- */
-#define LFXT1CLK 32768
-#define XT2CLK 8000000
-#define DCOCLK 750000
-
-/*
- * Pin definitions for the Olimex MSP430-P1611 board.
- */
-#define P3_O_TXD0 4
-#define P3_O_TXD0_MASK (1 << P3_O_TXD0)
-#define P3_I_RXD0 5
-#define P3_I_RXD0_MASK (1 << P3_I_RXD0)
-#define P6_O_LED 0
-#define P6_O_LED_MASK (1 << P6_O_LED)
-#define P6_I_BUTTON 1
-#define P6_I_BUTTON_MASK (1 << P6_I_BUTTON)
-
-/*
- * Initial I/O ports settings.
- */
-#define VAL_P1OUT 0x00
-#define VAL_P1DIR 0xFF
-
-#define VAL_P2OUT 0x00
-#define VAL_P2DIR 0xFF
-
-#define VAL_P3OUT P3_O_TXD0_MASK
-#define VAL_P3DIR ~P3_I_RXD0_MASK
-
-#define VAL_P4OUT 0x00
-#define VAL_P4DIR 0xFF
-
-#define VAL_P5OUT 0x00
-#define VAL_P5DIR 0xFF
-
-#define VAL_P6OUT P6_O_LED_MASK
-#define VAL_P6DIR ~P6_I_BUTTON_MASK
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
diff --git a/boards/OLIMEX_MSP430_P1611/board.mk b/boards/OLIMEX_MSP430_P1611/board.mk deleted file mode 100644 index 84acad8ed..000000000 --- a/boards/OLIMEX_MSP430_P1611/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files.
-BOARDSRC = ${CHIBIOS}/boards/OLIMEX_MSP430_P1611/board.c
-
-# Required include directories
-BOARDINC = ${CHIBIOS}/boards/OLIMEX_MSP430_P1611
diff --git a/boards/OLIMEX_SAM7_EX256/board.c b/boards/OLIMEX_SAM7_EX256/board.c deleted file mode 100644 index 9de1b3ffc..000000000 --- a/boards/OLIMEX_SAM7_EX256/board.c +++ /dev/null @@ -1,137 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-/**
- * @brief PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- * This variable is used by the HAL when initializing the PAL driver.
- */
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-const PALConfig pal_default_config =
-{
- {VAL_PIOA_ODSR, VAL_PIOA_OSR, VAL_PIOA_PUSR},
-#if (SAM7_PLATFORM == SAM7X128) || (SAM7_PLATFORM == SAM7X256) || \
- (SAM7_PLATFORM == SAM7X512) || (SAM7_PLATFORM == SAM7A3)
- {VAL_PIOB_ODSR, VAL_PIOB_OSR, VAL_PIOB_PUSR}
-#endif
-};
-#endif
-
-/*
- * SYS IRQ handling here.
- */
-static CH_IRQ_HANDLER(SYSIrqHandler) {
-
- CH_IRQ_PROLOGUE();
-
- if (AT91C_BASE_PITC->PITC_PISR & AT91C_PITC_PITS) {
- (void) AT91C_BASE_PITC->PITC_PIVR;
- chSysLockFromIsr();
- chSysTimerHandlerI();
- chSysUnlockFromIsr();
- }
-
-#if USE_SAM7_DBGU_UART
- if (AT91C_BASE_DBGU->DBGU_CSR &
- (AT91C_US_RXRDY | AT91C_US_TXRDY | AT91C_US_PARE | AT91C_US_FRAME |
- AT91C_US_OVRE | AT91C_US_RXBRK)) {
- sd_lld_serve_interrupt(&SDDBG);
- }
-#endif
- AT91C_BASE_AIC->AIC_EOICR = 0;
- CH_IRQ_EPILOGUE();
-}
-
-/*
- * Early initialization code.
- * This initialization must be performed just after stack setup and before
- * any other initialization.
- */
-void __early_init(void) {
-
- /* Watchdog disabled.*/
- AT91C_BASE_WDTC->WDTC_WDMR = AT91C_WDTC_WDDIS;
-
- at91sam7_clock_init();
-}
-
-#if HAL_USE_MMC_SPI
-/* Board-related functions related to the MMC_SPI driver.*/
-bool_t mmc_lld_is_card_inserted(MMCDriver *mmcp) {
-
- (void)mmcp;
- return !palReadPad(IOPORT2, PIOB_MMC_CP);
-}
-
-bool_t mmc_lld_is_write_protected(MMCDriver *mmcp) {
-
- (void)mmcp;
- return palReadPad(IOPORT2, PIOB_MMC_WP);
-}
-#endif
-
-/*
- * Board-specific initialization code.
- */
-void boardInit(void) {
-
- /*
- * LCD pins setup.
- */
- palClearPad(IOPORT2, PIOB_LCD_BL);
- palSetPadMode(IOPORT2, PIOB_LCD_BL, PAL_MODE_OUTPUT_PUSHPULL);
-
- palSetPad(IOPORT1, PIOA_LCD_RESET);
- palSetPadMode(IOPORT1, PIOA_LCD_RESET, PAL_MODE_OUTPUT_PUSHPULL);
-
- /*
- * Joystick and buttons setup.
- */
- palSetGroupMode(IOPORT1,
- PIOA_B1_MASK | PIOA_B2_MASK | PIOA_B3_MASK |
- PIOA_B4_MASK | PIOA_B5_MASK,
- 0,
- PAL_MODE_INPUT);
- palSetGroupMode(IOPORT2, PIOB_SW1_MASK | PIOB_SW2_MASK, 0, PAL_MODE_INPUT);
-
- /*
- * MMC/SD slot setup.
- */
- palSetGroupMode(IOPORT2,
- PIOB_MMC_WP_MASK | PIOB_MMC_CP_MASK,
- 0,
- PAL_MODE_INPUT);
-
- /*
- * PIT Initialization.
- */
- AIC_ConfigureIT(AT91C_ID_SYS,
- AT91C_AIC_SRCTYPE_HIGH_LEVEL | (AT91C_AIC_PRIOR_HIGHEST - 1),
- SYSIrqHandler);
- AIC_EnableIT(AT91C_ID_SYS);
- AT91C_BASE_PITC->PITC_PIMR = (MCK / 16 / CH_FREQUENCY) - 1;
- AT91C_BASE_PITC->PITC_PIMR |= AT91C_PITC_PITEN | AT91C_PITC_PITIEN;
-
- /*
- * RTS/CTS pins enabled for USART0 only.
- */
- AT91C_BASE_PIOA->PIO_PDR = AT91C_PA3_RTS0 | AT91C_PA4_CTS0;
- AT91C_BASE_PIOA->PIO_ASR = AT91C_PIO_PA3 | AT91C_PIO_PA4;
- AT91C_BASE_PIOA->PIO_PPUDR = AT91C_PIO_PA3 | AT91C_PIO_PA4;
-}
diff --git a/boards/OLIMEX_SAM7_EX256/board.h b/boards/OLIMEX_SAM7_EX256/board.h deleted file mode 100644 index efe5ead0c..000000000 --- a/boards/OLIMEX_SAM7_EX256/board.h +++ /dev/null @@ -1,101 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for the Olimex SAM7-EX256 development board.
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_OLIMEX_SAM7_EX256
-#define BOARD_NAME "Olimex SAM7-EX256"
-
-/*
- * Select your platform by modifying the following line.
- */
-#if !defined(SAM7_PLATFORM)
-#define SAM7_PLATFORM SAM7X256
-#endif
-
-#include "at91sam7.h"
-
-#define CLK 18432000
-#define MCK 48054857
-
-/*
- * Initial I/O setup.
- */
-#define VAL_PIOA_ODSR 0x00000000 /* Output data. */
-#define VAL_PIOA_OSR 0x00000000 /* Direction. */
-#define VAL_PIOA_PUSR 0xFFFFFFFF /* Pull-up. */
-
-#define VAL_PIOB_ODSR 0x00000000 /* Output data. */
-#define VAL_PIOB_OSR 0x00000000 /* Direction. */
-#define VAL_PIOB_PUSR 0xFFFFFFFF /* Pull-up. */
-
-/*
- * I/O definitions.
- */
-#define PIOA_LCD_RESET 2
-#define PIOA_LCD_RESET_MASK (1 << PIOA_LCD_RESET)
-#define PIOA_B1 7
-#define PIOA_B1_MASK (1 << PIOA_B1)
-#define PIOA_B2 8
-#define PIOA_B2_MASK (1 << PIOA_B2)
-#define PIOA_B3 9
-#define PIOA_B3_MASK (1 << PIOA_B3)
-#define PIOA_B4 14
-#define PIOA_B4_MASK (1 << PIOA_B4)
-#define PIOA_B5 15
-#define PIOA_B5_MASK (1 << PIOA_B5)
-#define PIOA_USB_PUP 25
-#define PIOA_USB_PUP_MASK (1 << PIOA_USB_PUP)
-#define PIOA_USB_PR 26
-#define PIOA_USB_PR_MASK (1 << PIOA_USB_PR)
-#define PIOA_CS_MMC 13
-
-#define PIOB_PHY_PD 18
-#define PIOB_PHY_PD_MASK (1 << PIOB_PHY_PD)
-#define PIOB_AUDIO_OUT 19
-#define PIOB_AUDIO_OUT_MASK (1 << PIOB_AUDIO_OUT)
-#define PIOB_LCD_BL 20
-#define PIOB_LCD_BL_MASK (1 << PIOB_LCD_BL)
-#define PIOB_MMC_WP 22
-#define PIOB_MMC_WP_MASK (1 << PIOB_MMC_WP)
-#define PIOB_MMC_CP 23
-#define PIOB_MMC_CP_MASK (1 << PIOB_MMC_CP)
-#define PIOB_SW1 24
-#define PIOB_SW1_MASK (1 << PIOB_SW1)
-#define PIOB_SW2 25
-#define PIOB_SW2_MASK (1 << PIOB_SW2)
-#define PIOB_PHY_IRQ 26
-#define PIOB_PHY_IRQ_MASK (1 << PIOB_PHY_IRQ)
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
diff --git a/boards/OLIMEX_SAM7_EX256/board.mk b/boards/OLIMEX_SAM7_EX256/board.mk deleted file mode 100644 index d0a4816f1..000000000 --- a/boards/OLIMEX_SAM7_EX256/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files.
-BOARDSRC = ${CHIBIOS}/boards/OLIMEX_SAM7_EX256/board.c
-
-# Required include directories
-BOARDINC = ${CHIBIOS}/boards/OLIMEX_SAM7_EX256
diff --git a/boards/OLIMEX_SAM7_P256/board.c b/boards/OLIMEX_SAM7_P256/board.c deleted file mode 100644 index 936019c4d..000000000 --- a/boards/OLIMEX_SAM7_P256/board.c +++ /dev/null @@ -1,117 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-/**
- * @brief PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- * This variable is used by the HAL when initializing the PAL driver.
- */
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-const PALConfig pal_default_config =
-{
- {VAL_PIOA_ODSR, VAL_PIOA_OSR, VAL_PIOA_PUSR},
-#if (SAM7_PLATFORM == SAM7X128) || (SAM7_PLATFORM == SAM7X256) || \
- (SAM7_PLATFORM == SAM7X512) || (SAM7_PLATFORM == SAM7A3)
- {VAL_PIOB_ODSR, VAL_PIOB_OSR, VAL_PIOB_PUSR}
-#endif
-};
-#endif
-
-/*
- * SYS IRQ handling here.
- */
-static CH_IRQ_HANDLER(SYSIrqHandler) {
-
- CH_IRQ_PROLOGUE();
-
- if (AT91C_BASE_PITC->PITC_PISR & AT91C_PITC_PITS) {
- (void) AT91C_BASE_PITC->PITC_PIVR;
- chSysLockFromIsr();
- chSysTimerHandlerI();
- chSysUnlockFromIsr();
- }
- AT91C_BASE_AIC->AIC_EOICR = 0;
-
- CH_IRQ_EPILOGUE();
-}
-
-/*
- * Early initialization code.
- * This initialization must be performed just after stack setup and before
- * any other initialization.
- */
-void __early_init(void) {
-
- /* Watchdog disabled.*/
- AT91C_BASE_WDTC->WDTC_WDMR = AT91C_WDTC_WDDIS;
-
- at91sam7_clock_init();
-}
-
-#if HAL_USE_MMC_SPI
-/* Board-related functions related to the MMC_SPI driver.*/
-bool_t mmc_lld_is_card_inserted(MMCDriver *mmcp) {
-
- (void)mmcp;
- return !palReadPad(IOPORT1, PIOA_MMC_CP);
-}
-
-bool_t mmc_lld_is_write_protected(MMCDriver *mmcp) {
-
- (void)mmcp;
- return palReadPad(IOPORT1, PIOA_MMC_WP);
-}
-#endif
-
-/*
- * Board-specific initialization code.
- */
-void boardInit(void) {
-
- /*
- * LED pins setup.
- */
- palClearPad(IOPORT1, PIOA_LED1);
- palSetPadMode(IOPORT1, PIOA_LED1, PAL_MODE_OUTPUT_PUSHPULL);
- palClearPad(IOPORT1, PIOA_LED2);
- palSetPadMode(IOPORT1, PIOA_LED2, PAL_MODE_OUTPUT_PUSHPULL);
-
- /*
- * buttons setup.
- */
- palSetGroupMode(IOPORT1, PIOA_B1_MASK | PIOA_B2_MASK, 0, PAL_MODE_INPUT);
-
- /*
- * MMC/SD slot setup.
- */
- palSetGroupMode(IOPORT1,
- PIOA_MMC_WP_MASK | PIOA_MMC_CP_MASK,
- 0,
- PAL_MODE_INPUT);
-
- /*
- * PIT Initialization.
- */
- AIC_ConfigureIT(AT91C_ID_SYS,
- AT91C_AIC_SRCTYPE_HIGH_LEVEL | (AT91C_AIC_PRIOR_HIGHEST - 1),
- SYSIrqHandler);
- AIC_EnableIT(AT91C_ID_SYS);
- AT91C_BASE_PITC->PITC_PIMR = (MCK / 16 / CH_FREQUENCY) - 1;
- AT91C_BASE_PITC->PITC_PIMR |= AT91C_PITC_PITEN | AT91C_PITC_PITIEN;
-}
diff --git a/boards/OLIMEX_SAM7_P256/board.h b/boards/OLIMEX_SAM7_P256/board.h deleted file mode 100644 index d16c13271..000000000 --- a/boards/OLIMEX_SAM7_P256/board.h +++ /dev/null @@ -1,81 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for the Olimex SAM7-P256 development board.
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_OLIMEX_SAM7_P256
-
-/*
- * Select your platform by modifying the following line.
- */
-#if !defined(SAM7_PLATFORM)
-#define SAM7_PLATFORM SAM7S256
-#endif
-
-#include "at91sam7.h"
-
-#define CLK 18432000
-#define MCK 48054857
-
-/*
- * Initial I/O setup.
- */
-#define VAL_PIOA_ODSR 0x00000000 /* Output data. */
-#define VAL_PIOA_OSR 0x00000000 /* Direction. */
-#define VAL_PIOA_PUSR 0xFFFFFFFF /* Pull-up. */
-
-/*
- * I/O definitions.
- */
-#define PIOA_LED1 18
-#define PIOA_LED1_MASK (1 << PIOA_LED1_MASK)
-#define PIOA_LED2 17
-#define PIOA_LED2_MASK (1 << PIOA_LED2_MASK)
-#define PIOA_B1 19
-#define PIOA_B1_MASK (1 << PIOA_B1)
-#define PIOA_B2 20
-#define PIOA_B2_MASK (1 << PIOA_B2)
-#define PIOA_DP_PUP 25
-#define PIOA_DD_PUP_MASK (1 << PIOA_DP_PUP)
-#define PIOA_USB_D 26
-#define PIOA_USB_D_MASK (1 << PIOA_USB_D)
-
-#define PIOA_MMC_WP 25
-#define PIOA_MMC_WP_MASK (1 << PIOA_MMC_WP)
-#define PIOA_MMC_CP 15
-#define PIOA_MMC_CP_MASK (1 << PIOA_MMC_CP)
-#define PIOA_MMC_NPCS0 11
-#define PIOA_MMC_NPCS0_MASK (1 << PIOA_MMC_NPCS0_MASK)
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
diff --git a/boards/OLIMEX_SAM7_P256/board.mk b/boards/OLIMEX_SAM7_P256/board.mk deleted file mode 100644 index e9fb6691a..000000000 --- a/boards/OLIMEX_SAM7_P256/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files.
-BOARDSRC = ${CHIBIOS}/boards/OLIMEX_SAM7_P256/board.c
-
-# Required include directories
-BOARDINC = ${CHIBIOS}/boards/OLIMEX_SAM7_P256
diff --git a/boards/OLIMEX_STM32_103STK/board.c b/boards/OLIMEX_STM32_103STK/board.c deleted file mode 100644 index 91ae5c34a..000000000 --- a/boards/OLIMEX_STM32_103STK/board.c +++ /dev/null @@ -1,50 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-/**
- * @brief PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- * This variable is used by the HAL when initializing the PAL driver.
- */
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-const PALConfig pal_default_config =
-{
- {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH},
- {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH},
- {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH},
- {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH},
- {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH},
-};
-#endif
-
-/*
- * Early initialization code.
- * This initialization must be performed just after stack setup and before
- * any other initialization.
- */
-void __early_init(void) {
-
- stm32_clock_init();
-}
-
-/*
- * Board-specific initialization code.
- */
-void boardInit(void) {
-}
diff --git a/boards/OLIMEX_STM32_103STK/board.h b/boards/OLIMEX_STM32_103STK/board.h deleted file mode 100644 index df1b832d2..000000000 --- a/boards/OLIMEX_STM32_103STK/board.h +++ /dev/null @@ -1,168 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for the Olimex STM32-103STK proto board.
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_OLIMEX_STM32_103STK
-#define BOARD_NAME "Olimex STM32-103STK"
-
-/*
- * Board frequencies.
- */
-#define STM32_LSECLK 32768
-#define STM32_HSECLK 8000000
-
-/*
- * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
- */
-#define STM32F10X_MD
-
-/*
- * IO pins assignments.
- */
-#define GPIOA_BUTTON_WAKEUP 0
-#define GPIOC_BUTTON_TAMPER 13
-#define GPIOC_JOY 5
-#define GPIOC_JOY_CENTER_BUT 6
-
-#define GPIOA_SPI1NSS 4
-#define GPIOB_SPI2NSS 12
-
-#define GPIOC_MMCWP 2
-#define GPIOC_MMCCP 1
-
-#define GPIOC_USB_P 4
-#define GPIOC_LCD_RES 7
-#define GPIOC_NRF_CE 8
-#define GPIOC_NRF_IRQ 9
-#define GPIOC_LCD_E 10
-
-#define GPIOC_USB_DISC 11
-#define GPIOC_LED 12
-
-#define GPIOB_ACCEL_IRQ 5
-
-/*
- * I/O ports initial setup, this configuration is established soon after reset
- * in the initialization code.
- *
- * The digits have the following meaning:
- * 0 - Analog input.
- * 1 - Push Pull output 10MHz.
- * 2 - Push Pull output 2MHz.
- * 3 - Push Pull output 50MHz.
- * 4 - Digital input.
- * 5 - Open Drain output 10MHz.
- * 6 - Open Drain output 2MHz.
- * 7 - Open Drain output 50MHz.
- * 8 - Digital input with PullUp or PullDown resistor depending on ODR.
- * 9 - Alternate Push Pull output 10MHz.
- * A - Alternate Push Pull output 2MHz.
- * B - Alternate Push Pull output 50MHz.
- * C - Reserved.
- * D - Alternate Open Drain output 10MHz.
- * E - Alternate Open Drain output 2MHz.
- * F - Alternate Open Drain output 50MHz.
- * Please refer to the STM32 Reference Manual for details.
- */
-
-/*
- * Port A setup.
- * Everything input with pull-up except:
- * PA0 - Normal input (BUTTON).
- * PA2 - Alternate output (USART2 TX).
- * PA3 - Normal input (USART2 RX).
- */
-#define VAL_GPIOACRL 0x88884B84 /* PA7...PA0 */
-#define VAL_GPIOACRH 0x88888888 /* PA15...PA8 */
-#define VAL_GPIOAODR 0xFFFFFFFF
-
-/*
- * Port B setup.
- * Everything input with pull-up except:
- * PB6,7 - Alternate open drain (I2C1).
- * PB10,11 - Alternate open drain (I2C2).
- * PB12 - Push Pull output (MMC SPI2 NSS).
- * PB13 - Alternate output (MMC SPI2 SCK).
- * PB14 - Normal input (MMC SPI2 MISO).
- * PB15 - Alternate output (MMC SPI2 MOSI).
- */
-#define VAL_GPIOBCRL 0xEE888888 /* PB7...PB0 */
-#define VAL_GPIOBCRH 0xB4B3EE88 /* PB15...PB8 */
-#define VAL_GPIOBODR 0xFFFFFFFF
-
-/*
- * Port C setup.
- * Everything input with pull-up except:
- * PC4 - Normal input because there is an external resistor.
- * PC5 - Analog input (joystick).
- * PC6 - Normal input because there is an external resistor.
- * PC7 - Normal input because there is an external resistor.
- * PC10 - Push Pull output (CAN CNTRL).
- * PC11 - Push Pull output (USB DISC).
- * PC12 - Open Drain output (LED).
- */
-#define VAL_GPIOCCRL 0x44048888 /* PC7...PC0 */
-#define VAL_GPIOCCRH 0x88863388 /* PC15...PC8 */
-#define VAL_GPIOCODR 0xFFFFFFFF
-
-/*
- * Port D setup.
- * Everything input with pull-up except:
- * PD0 - Normal input (XTAL).
- * PD1 - Normal input (XTAL).
- */
-#define VAL_GPIODCRL 0x88888844 /* PD7...PD0 */
-#define VAL_GPIODCRH 0x88888888 /* PD15...PD8 */
-#define VAL_GPIODODR 0xFFFFFFFF
-
-/*
- * Port E setup.
- * Everything input with pull-up except:
- */
-#define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */
-#define VAL_GPIOECRH 0x88888888 /* PE15...PE8 */
-#define VAL_GPIOEODR 0xFFFFFFFF
-
-/*
- * USB bus activation macro, required by the USB driver.
- */
-#define usb_lld_connect_bus(usbp) palClearPad(GPIOC, GPIOC_USB_DISC)
-
-/*
- * USB bus de-activation macro, required by the USB driver.
- */
-#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOC, GPIOC_USB_DISC)
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
diff --git a/boards/OLIMEX_STM32_103STK/board.mk b/boards/OLIMEX_STM32_103STK/board.mk deleted file mode 100644 index 383e1c490..000000000 --- a/boards/OLIMEX_STM32_103STK/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files.
-BOARDSRC = ${CHIBIOS}/boards/OLIMEX_STM32_103STK/board.c
-
-# Required include directories
-BOARDINC = ${CHIBIOS}/boards/OLIMEX_STM32_103STK
diff --git a/boards/OLIMEX_STM32_E407/board.c b/boards/OLIMEX_STM32_E407/board.c deleted file mode 100644 index a4152433a..000000000 --- a/boards/OLIMEX_STM32_E407/board.c +++ /dev/null @@ -1,108 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-/**
- * @brief PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- * This variable is used by the HAL when initializing the PAL driver.
- */
-const PALConfig pal_default_config =
-{
- {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
- VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH},
- {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
- VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH},
- {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
- VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH},
- {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
- VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH},
- {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
- VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH},
- {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
- VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH},
- {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
- VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH},
- {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
- VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH},
- {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
- VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH}
-};
-#endif
-
-/**
- * @brief Early initialization code.
- * @details This initialization must be performed just after stack setup
- * and before any other initialization.
- */
-void __early_init(void) {
-
- stm32_clock_init();
-}
-
-#if HAL_USE_SDC || defined(__DOXYGEN__)
-/**
- * @brief SDC card detection.
- */
-bool_t sdc_lld_is_card_inserted(SDCDriver *sdcp) {
- static bool_t last_status = FALSE;
-
- if (blkIsTransferring(sdcp))
- return last_status;
- return last_status = (bool_t)palReadPad(GPIOC, GPIOC_SD_D3);
-}
-
-/**
- * @brief SDC card write protection detection.
- */
-bool_t sdc_lld_is_write_protected(SDCDriver *sdcp) {
-
- (void)sdcp;
- return FALSE;
-}
-#endif /* HAL_USE_SDC */
-
-#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
-/**
- * @brief MMC_SPI card detection.
- */
-bool_t mmc_lld_is_card_inserted(MMCDriver *mmcp) {
-
- (void)mmcp;
- /* TODO: Fill the implementation.*/
- return TRUE;
-}
-
-/**
- * @brief MMC_SPI card write protection detection.
- */
-bool_t mmc_lld_is_write_protected(MMCDriver *mmcp) {
-
- (void)mmcp;
- /* TODO: Fill the implementation.*/
- return FALSE;
-}
-#endif
-
-/**
- * @brief Board-specific initialization code.
- * @todo Add your board-specific code, if any.
- */
-void boardInit(void) {
-}
diff --git a/boards/OLIMEX_STM32_E407/board.h b/boards/OLIMEX_STM32_E407/board.h deleted file mode 100644 index 505f30f7d..000000000 --- a/boards/OLIMEX_STM32_E407/board.h +++ /dev/null @@ -1,1301 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for Olimex STM32-E407 board.
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_OLIMEX_STM32_E407
-#define BOARD_NAME "Olimex STM32-E407"
-
-/*
- * Ethernet PHY type.
- */
-#define BOARD_PHY_ID MII_KS8721_ID
-#define BOARD_PHY_RMII
-
-/*
- * Board oscillators-related settings.
- */
-#if !defined(STM32_LSECLK)
-#define STM32_LSECLK 32768
-#endif
-
-#if !defined(STM32_HSECLK)
-#define STM32_HSECLK 12000000
-#endif
-
-
-/*
- * Board voltages.
- * Required for performance limits calculation.
- */
-#define STM32_VDD 330
-
-/*
- * MCU type as defined in the ST header file stm32f4xx.h.
- */
-#define STM32F4XX
-
-/*
- * IO pins assignments.
- */
-#define GPIOA_BUTTON_WKUP 0
-#define GPIOA_ETH_RMII_REF_CLK 1
-#define GPIOA_ETH_RMII_MDIO 2
-#define GPIOA_ETH_RMII_MDINT 3
-#define GPIOA_PIN4 4
-#define GPIOA_PIN5 5
-#define GPIOA_PIN6 6
-#define GPIOA_ETH_RMII_CRS_DV 7
-#define GPIOA_USB_HS_BUSON 8
-#define GPIOA_OTG_FS_VBUS 9
-#define GPIOA_OTG_FS_ID 10
-#define GPIOA_OTG_FS_DM 11
-#define GPIOA_OTG_FS_DP 12
-#define GPIOA_JTAG_TMS 13
-#define GPIOA_JTAG_TCK 14
-#define GPIOA_JTAG_TDI 15
-
-#define GPIOB_USB_FS_BUSON 0
-#define GPIOB_USB_HS_FAULT 1
-#define GPIOB_BOOT1 2
-#define GPIOB_JTAG_TDO 3
-#define GPIOB_JTAG_TRST 4
-#define GPIOB_PIN5 5
-#define GPIOB_PIN6 6
-#define GPIOB_PIN7 7
-#define GPIOB_I2C1_SCL 8
-#define GPIOB_I2C1_SDA 9
-#define GPIOB_SPI2_SCK 10
-#define GPIOB_PIN11 11
-#define GPIOB_OTG_HS_ID 12
-#define GPIOB_OTG_HS_VBUS 13
-#define GPIOB_OTG_HS_DM 14
-#define GPIOB_OTG_HS_DP 15
-
-#define GPIOC_PIN0 0
-#define GPIOC_ETH_RMII_MDC 1
-#define GPIOC_SPI2_MISO 2
-#define GPIOC_SPI2_MOSI 3
-#define GPIOC_ETH_RMII_RXD0 4
-#define GPIOC_ETH_RMII_RXD1 5
-#define GPIOC_USART6_TX 6
-#define GPIOC_USART6_RX 7
-#define GPIOC_SD_D0 8
-#define GPIOC_SD_D1 9
-#define GPIOC_SD_D2 10
-#define GPIOC_SD_D3 11
-#define GPIOC_SD_CLK 12
-#define GPIOC_LED 13
-#define GPIOC_OSC32_IN 14
-#define GPIOC_OSC32_OUT 15
-
-#define GPIOD_PIN0 0
-#define GPIOD_PIN1 1
-#define GPIOD_SD_CMD 2
-#define GPIOD_PIN3 3
-#define GPIOD_PIN4 4
-#define GPIOD_PIN5 5
-#define GPIOD_PIN6 6
-#define GPIOD_PIN7 7
-#define GPIOD_PIN8 8
-#define GPIOD_PIN9 9
-#define GPIOD_PIN10 10
-#define GPIOD_PIN11 11
-#define GPIOD_PIN12 12
-#define GPIOD_PIN13 13
-#define GPIOD_PIN14 14
-#define GPIOD_PIN15 15
-
-#define GPIOE_PIN0 0
-#define GPIOE_PIN1 1
-#define GPIOE_PIN2 2
-#define GPIOE_PIN3 3
-#define GPIOE_PIN4 4
-#define GPIOE_PIN5 5
-#define GPIOE_PIN6 6
-#define GPIOE_PIN7 7
-#define GPIOE_PIN8 8
-#define GPIOE_PIN9 9
-#define GPIOE_PIN10 10
-#define GPIOE_PIN11 11
-#define GPIOE_PIN12 12
-#define GPIOE_PIN13 13
-#define GPIOE_PIN14 14
-#define GPIOE_PIN15 15
-
-#define GPIOF_PIN0 0
-#define GPIOF_PIN1 1
-#define GPIOF_PIN2 2
-#define GPIOF_PIN3 3
-#define GPIOF_PIN4 4
-#define GPIOF_PIN5 5
-#define GPIOF_PIN6 6
-#define GPIOF_PIN7 7
-#define GPIOF_PIN8 8
-#define GPIOF_PIN9 9
-#define GPIOF_PIN10 10
-#define GPIOF_USB_FS_FAULT 11
-#define GPIOF_PIN12 12
-#define GPIOF_PIN13 13
-#define GPIOF_PIN14 14
-#define GPIOF_PIN15 15
-
-#define GPIOG_PIN0 0
-#define GPIOG_PIN1 1
-#define GPIOG_PIN2 2
-#define GPIOG_PIN3 3
-#define GPIOG_PIN4 4
-#define GPIOG_PIN5 5
-#define GPIOG_PIN6 6
-#define GPIOG_PIN7 7
-#define GPIOG_PIN8 8
-#define GPIOG_PIN9 9
-#define GPIOG_SPI2_CS 10
-#define GPIOG_ETH_RMII_TXEN 11
-#define GPIOG_PIN12 12
-#define GPIOG_ETH_RMII_TXD0 13
-#define GPIOG_ETH_RMII_TXD1 14
-#define GPIOG_PIN15 15
-
-#define GPIOH_OSC_IN 0
-#define GPIOH_OSC_OUT 1
-#define GPIOH_PIN2 2
-#define GPIOH_PIN3 3
-#define GPIOH_PIN4 4
-#define GPIOH_PIN5 5
-#define GPIOH_PIN6 6
-#define GPIOH_PIN7 7
-#define GPIOH_PIN8 8
-#define GPIOH_PIN9 9
-#define GPIOH_PIN10 10
-#define GPIOH_PIN11 11
-#define GPIOH_PIN12 12
-#define GPIOH_PIN13 13
-#define GPIOH_PIN14 14
-#define GPIOH_PIN15 15
-
-#define GPIOI_PIN0 0
-#define GPIOI_PIN1 1
-#define GPIOI_PIN2 2
-#define GPIOI_PIN3 3
-#define GPIOI_PIN4 4
-#define GPIOI_PIN5 5
-#define GPIOI_PIN6 6
-#define GPIOI_PIN7 7
-#define GPIOI_PIN8 8
-#define GPIOI_PIN9 9
-#define GPIOI_PIN10 10
-#define GPIOI_PIN11 11
-#define GPIOI_PIN12 12
-#define GPIOI_PIN13 13
-#define GPIOI_PIN14 14
-#define GPIOI_PIN15 15
-
-/*
- * I/O ports initial setup, this configuration is established soon after reset
- * in the initialization code.
- * Please refer to the STM32 Reference Manual for details.
- */
-#define PIN_MODE_INPUT(n) (0U << ((n) * 2))
-#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2))
-#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2))
-#define PIN_MODE_ANALOG(n) (3U << ((n) * 2))
-#define PIN_ODR_LOW(n) (0U << (n))
-#define PIN_ODR_HIGH(n) (1U << (n))
-#define PIN_OTYPE_PUSHPULL(n) (0U << (n))
-#define PIN_OTYPE_OPENDRAIN(n) (1U << (n))
-#define PIN_OSPEED_2M(n) (0U << ((n) * 2))
-#define PIN_OSPEED_25M(n) (1U << ((n) * 2))
-#define PIN_OSPEED_50M(n) (2U << ((n) * 2))
-#define PIN_OSPEED_100M(n) (3U << ((n) * 2))
-#define PIN_PUPDR_FLOATING(n) (0U << ((n) * 2))
-#define PIN_PUPDR_PULLUP(n) (1U << ((n) * 2))
-#define PIN_PUPDR_PULLDOWN(n) (2U << ((n) * 2))
-#define PIN_AFIO_AF(n, v) ((v##U) << ((n % 8) * 4))
-
-/*
- * GPIOA setup:
- *
- * PA0 - BUTTON_WKUP (input floating).
- * PA1 - ETH_RMII_REF_CLK (alternate 11).
- * PA2 - ETH_RMII_MDIO (alternate 11).
- * PA3 - ETH_RMII_MDINT (input floating).
- * PA4 - PIN4 (input pullup).
- * PA5 - PIN5 (input pullup).
- * PA6 - PIN6 (input pullup).
- * PA7 - ETH_RMII_CRS_DV (alternate 11).
- * PA8 - USB_HS_BUSON (output pushpull maximum).
- * PA9 - OTG_FS_VBUS (input pulldown).
- * PA10 - OTG_FS_ID (alternate 10).
- * PA11 - OTG_FS_DM (alternate 10).
- * PA12 - OTG_FS_DP (alternate 10).
- * PA13 - JTAG_TMS (alternate 0).
- * PA14 - JTAG_TCK (alternate 0).
- * PA15 - JTAG_TDI (alternate 0).
- */
-#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_BUTTON_WKUP) | \
- PIN_MODE_ALTERNATE(GPIOA_ETH_RMII_REF_CLK) |\
- PIN_MODE_ALTERNATE(GPIOA_ETH_RMII_MDIO) |\
- PIN_MODE_INPUT(GPIOA_ETH_RMII_MDINT) | \
- PIN_MODE_INPUT(GPIOA_PIN4) | \
- PIN_MODE_INPUT(GPIOA_PIN5) | \
- PIN_MODE_INPUT(GPIOA_PIN6) | \
- PIN_MODE_ALTERNATE(GPIOA_ETH_RMII_CRS_DV) |\
- PIN_MODE_OUTPUT(GPIOA_USB_HS_BUSON) | \
- PIN_MODE_INPUT(GPIOA_OTG_FS_VBUS) | \
- PIN_MODE_ALTERNATE(GPIOA_OTG_FS_ID) | \
- PIN_MODE_ALTERNATE(GPIOA_OTG_FS_DM) | \
- PIN_MODE_ALTERNATE(GPIOA_OTG_FS_DP) | \
- PIN_MODE_ALTERNATE(GPIOA_JTAG_TMS) | \
- PIN_MODE_ALTERNATE(GPIOA_JTAG_TCK) | \
- PIN_MODE_ALTERNATE(GPIOA_JTAG_TDI))
-#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON_WKUP) |\
- PIN_OTYPE_PUSHPULL(GPIOA_ETH_RMII_REF_CLK) |\
- PIN_OTYPE_PUSHPULL(GPIOA_ETH_RMII_MDIO) |\
- PIN_OTYPE_PUSHPULL(GPIOA_ETH_RMII_MDINT) |\
- PIN_OTYPE_PUSHPULL(GPIOA_PIN4) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN5) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN6) | \
- PIN_OTYPE_PUSHPULL(GPIOA_ETH_RMII_CRS_DV) |\
- PIN_OTYPE_PUSHPULL(GPIOA_USB_HS_BUSON) |\
- PIN_OTYPE_PUSHPULL(GPIOA_OTG_FS_VBUS) |\
- PIN_OTYPE_PUSHPULL(GPIOA_OTG_FS_ID) | \
- PIN_OTYPE_PUSHPULL(GPIOA_OTG_FS_DM) | \
- PIN_OTYPE_PUSHPULL(GPIOA_OTG_FS_DP) | \
- PIN_OTYPE_PUSHPULL(GPIOA_JTAG_TMS) | \
- PIN_OTYPE_PUSHPULL(GPIOA_JTAG_TCK) | \
- PIN_OTYPE_PUSHPULL(GPIOA_JTAG_TDI))
-#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_100M(GPIOA_BUTTON_WKUP) | \
- PIN_OSPEED_100M(GPIOA_ETH_RMII_REF_CLK) |\
- PIN_OSPEED_100M(GPIOA_ETH_RMII_MDIO) | \
- PIN_OSPEED_100M(GPIOA_ETH_RMII_MDINT) |\
- PIN_OSPEED_100M(GPIOA_PIN4) | \
- PIN_OSPEED_100M(GPIOA_PIN5) | \
- PIN_OSPEED_100M(GPIOA_PIN6) | \
- PIN_OSPEED_100M(GPIOA_ETH_RMII_CRS_DV) |\
- PIN_OSPEED_100M(GPIOA_USB_HS_BUSON) | \
- PIN_OSPEED_100M(GPIOA_OTG_FS_VBUS) | \
- PIN_OSPEED_100M(GPIOA_OTG_FS_ID) | \
- PIN_OSPEED_100M(GPIOA_OTG_FS_DM) | \
- PIN_OSPEED_100M(GPIOA_OTG_FS_DP) | \
- PIN_OSPEED_100M(GPIOA_JTAG_TMS) | \
- PIN_OSPEED_100M(GPIOA_JTAG_TCK) | \
- PIN_OSPEED_100M(GPIOA_JTAG_TDI))
-#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_BUTTON_WKUP) |\
- PIN_PUPDR_FLOATING(GPIOA_ETH_RMII_REF_CLK) |\
- PIN_PUPDR_FLOATING(GPIOA_ETH_RMII_MDIO) |\
- PIN_PUPDR_FLOATING(GPIOA_ETH_RMII_MDINT) |\
- PIN_PUPDR_PULLUP(GPIOA_PIN4) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN5) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN6) | \
- PIN_PUPDR_FLOATING(GPIOA_ETH_RMII_CRS_DV) |\
- PIN_PUPDR_FLOATING(GPIOA_USB_HS_BUSON) |\
- PIN_PUPDR_PULLDOWN(GPIOA_OTG_FS_VBUS) |\
- PIN_PUPDR_FLOATING(GPIOA_OTG_FS_ID) | \
- PIN_PUPDR_FLOATING(GPIOA_OTG_FS_DM) | \
- PIN_PUPDR_FLOATING(GPIOA_OTG_FS_DP) | \
- PIN_PUPDR_FLOATING(GPIOA_JTAG_TMS) | \
- PIN_PUPDR_PULLDOWN(GPIOA_JTAG_TCK) | \
- PIN_PUPDR_FLOATING(GPIOA_JTAG_TDI))
-#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_BUTTON_WKUP) | \
- PIN_ODR_HIGH(GPIOA_ETH_RMII_REF_CLK) | \
- PIN_ODR_HIGH(GPIOA_ETH_RMII_MDIO) | \
- PIN_ODR_HIGH(GPIOA_ETH_RMII_MDINT) | \
- PIN_ODR_HIGH(GPIOA_PIN4) | \
- PIN_ODR_HIGH(GPIOA_PIN5) | \
- PIN_ODR_HIGH(GPIOA_PIN6) | \
- PIN_ODR_HIGH(GPIOA_ETH_RMII_CRS_DV) | \
- PIN_ODR_HIGH(GPIOA_USB_HS_BUSON) | \
- PIN_ODR_HIGH(GPIOA_OTG_FS_VBUS) | \
- PIN_ODR_HIGH(GPIOA_OTG_FS_ID) | \
- PIN_ODR_HIGH(GPIOA_OTG_FS_DM) | \
- PIN_ODR_HIGH(GPIOA_OTG_FS_DP) | \
- PIN_ODR_HIGH(GPIOA_JTAG_TMS) | \
- PIN_ODR_HIGH(GPIOA_JTAG_TCK) | \
- PIN_ODR_HIGH(GPIOA_JTAG_TDI))
-#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_BUTTON_WKUP, 0) | \
- PIN_AFIO_AF(GPIOA_ETH_RMII_REF_CLK, 11) |\
- PIN_AFIO_AF(GPIOA_ETH_RMII_MDIO, 11) | \
- PIN_AFIO_AF(GPIOA_ETH_RMII_MDINT, 0) | \
- PIN_AFIO_AF(GPIOA_PIN4, 0) | \
- PIN_AFIO_AF(GPIOA_PIN5, 0) | \
- PIN_AFIO_AF(GPIOA_PIN6, 0) | \
- PIN_AFIO_AF(GPIOA_ETH_RMII_CRS_DV, 11))
-#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_USB_HS_BUSON, 0) | \
- PIN_AFIO_AF(GPIOA_OTG_FS_VBUS, 0) | \
- PIN_AFIO_AF(GPIOA_OTG_FS_ID, 10) | \
- PIN_AFIO_AF(GPIOA_OTG_FS_DM, 10) | \
- PIN_AFIO_AF(GPIOA_OTG_FS_DP, 10) | \
- PIN_AFIO_AF(GPIOA_JTAG_TMS, 0) | \
- PIN_AFIO_AF(GPIOA_JTAG_TCK, 0) | \
- PIN_AFIO_AF(GPIOA_JTAG_TDI, 0))
-
-/*
- * GPIOB setup:
- *
- * PB0 - USB_FS_BUSON (output pushpull maximum).
- * PB1 - USB_HS_FAULT (input floating).
- * PB2 - BOOT1 (input floating).
- * PB3 - JTAG_TDO (alternate 0).
- * PB4 - JTAG_TRST (alternate 0).
- * PB5 - PIN5 (input pullup).
- * PB6 - PIN6 (input pullup).
- * PB7 - PIN7 (input pullup).
- * PB8 - I2C1_SCL (alternate 4).
- * PB9 - I2C1_SDA (alternate 4).
- * PB10 - SPI2_SCK (alternate 5).
- * PB11 - PIN11 (input pullup).
- * PB12 - OTG_HS_ID (alternate 12).
- * PB13 - OTG_HS_VBUS (input pulldown).
- * PB14 - OTG_HS_DM (alternate 12).
- * PB15 - OTG_HS_DP (alternate 12).
- */
-#define VAL_GPIOB_MODER (PIN_MODE_OUTPUT(GPIOB_USB_FS_BUSON) | \
- PIN_MODE_INPUT(GPIOB_USB_HS_FAULT) | \
- PIN_MODE_INPUT(GPIOB_BOOT1) | \
- PIN_MODE_ALTERNATE(GPIOB_JTAG_TDO) | \
- PIN_MODE_ALTERNATE(GPIOB_JTAG_TRST) | \
- PIN_MODE_INPUT(GPIOB_PIN5) | \
- PIN_MODE_INPUT(GPIOB_PIN6) | \
- PIN_MODE_INPUT(GPIOB_PIN7) | \
- PIN_MODE_ALTERNATE(GPIOB_I2C1_SCL) | \
- PIN_MODE_ALTERNATE(GPIOB_I2C1_SDA) | \
- PIN_MODE_ALTERNATE(GPIOB_SPI2_SCK) | \
- PIN_MODE_INPUT(GPIOB_PIN11) | \
- PIN_MODE_ALTERNATE(GPIOB_OTG_HS_ID) | \
- PIN_MODE_INPUT(GPIOB_OTG_HS_VBUS) | \
- PIN_MODE_ALTERNATE(GPIOB_OTG_HS_DM) | \
- PIN_MODE_ALTERNATE(GPIOB_OTG_HS_DP))
-#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_USB_FS_BUSON) |\
- PIN_OTYPE_PUSHPULL(GPIOB_USB_HS_FAULT) |\
- PIN_OTYPE_PUSHPULL(GPIOB_BOOT1) | \
- PIN_OTYPE_PUSHPULL(GPIOB_JTAG_TDO) | \
- PIN_OTYPE_PUSHPULL(GPIOB_JTAG_TRST) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN6) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | \
- PIN_OTYPE_OPENDRAIN(GPIOB_I2C1_SCL) | \
- PIN_OTYPE_OPENDRAIN(GPIOB_I2C1_SDA) | \
- PIN_OTYPE_PUSHPULL(GPIOB_SPI2_SCK) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | \
- PIN_OTYPE_PUSHPULL(GPIOB_OTG_HS_ID) | \
- PIN_OTYPE_PUSHPULL(GPIOB_OTG_HS_VBUS) |\
- PIN_OTYPE_PUSHPULL(GPIOB_OTG_HS_DM) | \
- PIN_OTYPE_PUSHPULL(GPIOB_OTG_HS_DP))
-#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_100M(GPIOB_USB_FS_BUSON) | \
- PIN_OSPEED_100M(GPIOB_USB_HS_FAULT) | \
- PIN_OSPEED_100M(GPIOB_BOOT1) | \
- PIN_OSPEED_100M(GPIOB_JTAG_TDO) | \
- PIN_OSPEED_100M(GPIOB_JTAG_TRST) | \
- PIN_OSPEED_100M(GPIOB_PIN5) | \
- PIN_OSPEED_100M(GPIOB_PIN6) | \
- PIN_OSPEED_100M(GPIOB_PIN7) | \
- PIN_OSPEED_100M(GPIOB_I2C1_SCL) | \
- PIN_OSPEED_100M(GPIOB_I2C1_SDA) | \
- PIN_OSPEED_100M(GPIOB_SPI2_SCK) | \
- PIN_OSPEED_100M(GPIOB_PIN11) | \
- PIN_OSPEED_100M(GPIOB_OTG_HS_ID) | \
- PIN_OSPEED_100M(GPIOB_OTG_HS_VBUS) | \
- PIN_OSPEED_100M(GPIOB_OTG_HS_DM) | \
- PIN_OSPEED_100M(GPIOB_OTG_HS_DP))
-#define VAL_GPIOB_PUPDR (PIN_PUPDR_FLOATING(GPIOB_USB_FS_BUSON) |\
- PIN_PUPDR_FLOATING(GPIOB_USB_HS_FAULT) |\
- PIN_PUPDR_FLOATING(GPIOB_BOOT1) | \
- PIN_PUPDR_FLOATING(GPIOB_JTAG_TDO) | \
- PIN_PUPDR_FLOATING(GPIOB_JTAG_TRST) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN5) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN6) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN7) | \
- PIN_PUPDR_FLOATING(GPIOB_I2C1_SCL) | \
- PIN_PUPDR_FLOATING(GPIOB_I2C1_SDA) | \
- PIN_PUPDR_FLOATING(GPIOB_SPI2_SCK) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN11) | \
- PIN_PUPDR_FLOATING(GPIOB_OTG_HS_ID) | \
- PIN_PUPDR_PULLDOWN(GPIOB_OTG_HS_VBUS) |\
- PIN_PUPDR_FLOATING(GPIOB_OTG_HS_DM) | \
- PIN_PUPDR_FLOATING(GPIOB_OTG_HS_DP))
-#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_USB_FS_BUSON) | \
- PIN_ODR_HIGH(GPIOB_USB_HS_FAULT) | \
- PIN_ODR_HIGH(GPIOB_BOOT1) | \
- PIN_ODR_HIGH(GPIOB_JTAG_TDO) | \
- PIN_ODR_HIGH(GPIOB_JTAG_TRST) | \
- PIN_ODR_HIGH(GPIOB_PIN5) | \
- PIN_ODR_HIGH(GPIOB_PIN6) | \
- PIN_ODR_HIGH(GPIOB_PIN7) | \
- PIN_ODR_HIGH(GPIOB_I2C1_SCL) | \
- PIN_ODR_HIGH(GPIOB_I2C1_SDA) | \
- PIN_ODR_HIGH(GPIOB_SPI2_SCK) | \
- PIN_ODR_HIGH(GPIOB_PIN11) | \
- PIN_ODR_HIGH(GPIOB_OTG_HS_ID) | \
- PIN_ODR_HIGH(GPIOB_OTG_HS_VBUS) | \
- PIN_ODR_HIGH(GPIOB_OTG_HS_DM) | \
- PIN_ODR_HIGH(GPIOB_OTG_HS_DP))
-#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_USB_FS_BUSON, 0) | \
- PIN_AFIO_AF(GPIOB_USB_HS_FAULT, 0) | \
- PIN_AFIO_AF(GPIOB_BOOT1, 0) | \
- PIN_AFIO_AF(GPIOB_JTAG_TDO, 0) | \
- PIN_AFIO_AF(GPIOB_JTAG_TRST, 0) | \
- PIN_AFIO_AF(GPIOB_PIN5, 0) | \
- PIN_AFIO_AF(GPIOB_PIN6, 0) | \
- PIN_AFIO_AF(GPIOB_PIN7, 0))
-#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_I2C1_SCL, 4) | \
- PIN_AFIO_AF(GPIOB_I2C1_SDA, 4) | \
- PIN_AFIO_AF(GPIOB_SPI2_SCK, 5) | \
- PIN_AFIO_AF(GPIOB_PIN11, 0) | \
- PIN_AFIO_AF(GPIOB_OTG_HS_ID, 12) | \
- PIN_AFIO_AF(GPIOB_OTG_HS_VBUS, 0) | \
- PIN_AFIO_AF(GPIOB_OTG_HS_DM, 12) | \
- PIN_AFIO_AF(GPIOB_OTG_HS_DP, 12))
-
-/*
- * GPIOC setup:
- *
- * PC0 - PIN0 (input pullup).
- * PC1 - ETH_RMII_MDC (alternate 11).
- * PC2 - SPI2_MISO (alternate 5).
- * PC3 - SPI2_MOSI (alternate 5).
- * PC4 - ETH_RMII_RXD0 (alternate 11).
- * PC5 - ETH_RMII_RXD1 (alternate 11).
- * PC6 - USART6_TX (alternate 8).
- * PC7 - USART6_RX (alternate 8).
- * PC8 - SD_D0 (alternate 12).
- * PC9 - SD_D1 (alternate 12).
- * PC10 - SD_D2 (alternate 12).
- * PC11 - SD_D3 (alternate 12).
- * PC12 - SD_CLK (alternate 12).
- * PC13 - LED (output pushpull maximum).
- * PC14 - OSC32_IN (input floating).
- * PC15 - OSC32_OUT (input floating).
- */
-#define VAL_GPIOC_MODER (PIN_MODE_INPUT(GPIOC_PIN0) | \
- PIN_MODE_ALTERNATE(GPIOC_ETH_RMII_MDC) |\
- PIN_MODE_ALTERNATE(GPIOC_SPI2_MISO) | \
- PIN_MODE_ALTERNATE(GPIOC_SPI2_MOSI) | \
- PIN_MODE_ALTERNATE(GPIOC_ETH_RMII_RXD0) |\
- PIN_MODE_ALTERNATE(GPIOC_ETH_RMII_RXD1) |\
- PIN_MODE_ALTERNATE(GPIOC_USART6_TX) | \
- PIN_MODE_ALTERNATE(GPIOC_USART6_RX) | \
- PIN_MODE_ALTERNATE(GPIOC_SD_D0) | \
- PIN_MODE_ALTERNATE(GPIOC_SD_D1) | \
- PIN_MODE_ALTERNATE(GPIOC_SD_D2) | \
- PIN_MODE_ALTERNATE(GPIOC_SD_D3) | \
- PIN_MODE_ALTERNATE(GPIOC_SD_CLK) | \
- PIN_MODE_OUTPUT(GPIOC_LED) | \
- PIN_MODE_INPUT(GPIOC_OSC32_IN) | \
- PIN_MODE_INPUT(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_PIN0) | \
- PIN_OTYPE_PUSHPULL(GPIOC_ETH_RMII_MDC) |\
- PIN_OTYPE_PUSHPULL(GPIOC_SPI2_MISO) | \
- PIN_OTYPE_PUSHPULL(GPIOC_SPI2_MOSI) | \
- PIN_OTYPE_PUSHPULL(GPIOC_ETH_RMII_RXD0) |\
- PIN_OTYPE_PUSHPULL(GPIOC_ETH_RMII_RXD1) |\
- PIN_OTYPE_PUSHPULL(GPIOC_USART6_TX) | \
- PIN_OTYPE_PUSHPULL(GPIOC_USART6_RX) | \
- PIN_OTYPE_PUSHPULL(GPIOC_SD_D0) | \
- PIN_OTYPE_PUSHPULL(GPIOC_SD_D1) | \
- PIN_OTYPE_PUSHPULL(GPIOC_SD_D2) | \
- PIN_OTYPE_PUSHPULL(GPIOC_SD_D3) | \
- PIN_OTYPE_PUSHPULL(GPIOC_SD_CLK) | \
- PIN_OTYPE_PUSHPULL(GPIOC_LED) | \
- PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) | \
- PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_100M(GPIOC_PIN0) | \
- PIN_OSPEED_100M(GPIOC_ETH_RMII_MDC) | \
- PIN_OSPEED_100M(GPIOC_SPI2_MISO) | \
- PIN_OSPEED_100M(GPIOC_SPI2_MOSI) | \
- PIN_OSPEED_100M(GPIOC_ETH_RMII_RXD0) | \
- PIN_OSPEED_100M(GPIOC_ETH_RMII_RXD1) | \
- PIN_OSPEED_100M(GPIOC_USART6_TX) | \
- PIN_OSPEED_100M(GPIOC_USART6_RX) | \
- PIN_OSPEED_100M(GPIOC_SD_D0) | \
- PIN_OSPEED_100M(GPIOC_SD_D1) | \
- PIN_OSPEED_100M(GPIOC_SD_D2) | \
- PIN_OSPEED_100M(GPIOC_SD_D3) | \
- PIN_OSPEED_100M(GPIOC_SD_CLK) | \
- PIN_OSPEED_100M(GPIOC_LED) | \
- PIN_OSPEED_100M(GPIOC_OSC32_IN) | \
- PIN_OSPEED_100M(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_PUPDR (PIN_PUPDR_PULLUP(GPIOC_PIN0) | \
- PIN_PUPDR_FLOATING(GPIOC_ETH_RMII_MDC) |\
- PIN_PUPDR_FLOATING(GPIOC_SPI2_MISO) | \
- PIN_PUPDR_FLOATING(GPIOC_SPI2_MOSI) | \
- PIN_PUPDR_FLOATING(GPIOC_ETH_RMII_RXD0) |\
- PIN_PUPDR_FLOATING(GPIOC_ETH_RMII_RXD1) |\
- PIN_PUPDR_FLOATING(GPIOC_USART6_TX) | \
- PIN_PUPDR_FLOATING(GPIOC_USART6_RX) | \
- PIN_PUPDR_FLOATING(GPIOC_SD_D0) | \
- PIN_PUPDR_FLOATING(GPIOC_SD_D1) | \
- PIN_PUPDR_FLOATING(GPIOC_SD_D2) | \
- PIN_PUPDR_FLOATING(GPIOC_SD_D3) | \
- PIN_PUPDR_FLOATING(GPIOC_SD_CLK) | \
- PIN_PUPDR_FLOATING(GPIOC_LED) | \
- PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) | \
- PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_PIN0) | \
- PIN_ODR_HIGH(GPIOC_ETH_RMII_MDC) | \
- PIN_ODR_HIGH(GPIOC_SPI2_MISO) | \
- PIN_ODR_HIGH(GPIOC_SPI2_MOSI) | \
- PIN_ODR_HIGH(GPIOC_ETH_RMII_RXD0) | \
- PIN_ODR_HIGH(GPIOC_ETH_RMII_RXD1) | \
- PIN_ODR_HIGH(GPIOC_USART6_TX) | \
- PIN_ODR_HIGH(GPIOC_USART6_RX) | \
- PIN_ODR_HIGH(GPIOC_SD_D0) | \
- PIN_ODR_HIGH(GPIOC_SD_D1) | \
- PIN_ODR_HIGH(GPIOC_SD_D2) | \
- PIN_ODR_HIGH(GPIOC_SD_D3) | \
- PIN_ODR_HIGH(GPIOC_SD_CLK) | \
- PIN_ODR_HIGH(GPIOC_LED) | \
- PIN_ODR_HIGH(GPIOC_OSC32_IN) | \
- PIN_ODR_HIGH(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_PIN0, 0) | \
- PIN_AFIO_AF(GPIOC_ETH_RMII_MDC, 11) | \
- PIN_AFIO_AF(GPIOC_SPI2_MISO, 5) | \
- PIN_AFIO_AF(GPIOC_SPI2_MOSI, 5) | \
- PIN_AFIO_AF(GPIOC_ETH_RMII_RXD0, 11) | \
- PIN_AFIO_AF(GPIOC_ETH_RMII_RXD1, 11) | \
- PIN_AFIO_AF(GPIOC_USART6_TX, 8) | \
- PIN_AFIO_AF(GPIOC_USART6_RX, 8))
-#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_SD_D0, 12) | \
- PIN_AFIO_AF(GPIOC_SD_D1, 12) | \
- PIN_AFIO_AF(GPIOC_SD_D2, 12) | \
- PIN_AFIO_AF(GPIOC_SD_D3, 12) | \
- PIN_AFIO_AF(GPIOC_SD_CLK, 12) | \
- PIN_AFIO_AF(GPIOC_LED, 0) | \
- PIN_AFIO_AF(GPIOC_OSC32_IN, 0) | \
- PIN_AFIO_AF(GPIOC_OSC32_OUT, 0))
-
-/*
- * GPIOD setup:
- *
- * PD0 - PIN0 (input pullup).
- * PD1 - PIN1 (input pullup).
- * PD2 - SD_CMD (alternate 12).
- * PD3 - PIN3 (input pullup).
- * PD4 - PIN4 (input pullup).
- * PD5 - PIN5 (input pullup).
- * PD6 - PIN6 (input pullup).
- * PD7 - PIN7 (input pullup).
- * PD8 - PIN8 (input pullup).
- * PD9 - PIN9 (input pullup).
- * PD10 - PIN10 (input pullup).
- * PD11 - PIN11 (input pullup).
- * PD12 - PIN12 (input pullup).
- * PD13 - PIN13 (input pullup).
- * PD14 - PIN14 (input pullup).
- * PD15 - PIN15 (input pullup).
- */
-#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | \
- PIN_MODE_INPUT(GPIOD_PIN1) | \
- PIN_MODE_ALTERNATE(GPIOD_SD_CMD) | \
- PIN_MODE_INPUT(GPIOD_PIN3) | \
- PIN_MODE_INPUT(GPIOD_PIN4) | \
- PIN_MODE_INPUT(GPIOD_PIN5) | \
- PIN_MODE_INPUT(GPIOD_PIN6) | \
- PIN_MODE_INPUT(GPIOD_PIN7) | \
- PIN_MODE_INPUT(GPIOD_PIN8) | \
- PIN_MODE_INPUT(GPIOD_PIN9) | \
- PIN_MODE_INPUT(GPIOD_PIN10) | \
- PIN_MODE_INPUT(GPIOD_PIN11) | \
- PIN_MODE_INPUT(GPIOD_PIN12) | \
- PIN_MODE_INPUT(GPIOD_PIN13) | \
- PIN_MODE_INPUT(GPIOD_PIN14) | \
- PIN_MODE_INPUT(GPIOD_PIN15))
-#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | \
- PIN_OTYPE_PUSHPULL(GPIOD_SD_CMD) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN4) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN5) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN15))
-#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_100M(GPIOD_PIN0) | \
- PIN_OSPEED_100M(GPIOD_PIN1) | \
- PIN_OSPEED_100M(GPIOD_SD_CMD) | \
- PIN_OSPEED_100M(GPIOD_PIN3) | \
- PIN_OSPEED_100M(GPIOD_PIN4) | \
- PIN_OSPEED_100M(GPIOD_PIN5) | \
- PIN_OSPEED_100M(GPIOD_PIN6) | \
- PIN_OSPEED_100M(GPIOD_PIN7) | \
- PIN_OSPEED_100M(GPIOD_PIN8) | \
- PIN_OSPEED_100M(GPIOD_PIN9) | \
- PIN_OSPEED_100M(GPIOD_PIN10) | \
- PIN_OSPEED_100M(GPIOD_PIN11) | \
- PIN_OSPEED_100M(GPIOD_PIN12) | \
- PIN_OSPEED_100M(GPIOD_PIN13) | \
- PIN_OSPEED_100M(GPIOD_PIN14) | \
- PIN_OSPEED_100M(GPIOD_PIN15))
-#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN1) | \
- PIN_PUPDR_FLOATING(GPIOD_SD_CMD) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN3) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN4) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN5) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN6) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN7) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN8) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN9) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN10) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN11) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN12) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN13) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN14) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN15))
-#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | \
- PIN_ODR_HIGH(GPIOD_PIN1) | \
- PIN_ODR_HIGH(GPIOD_SD_CMD) | \
- PIN_ODR_HIGH(GPIOD_PIN3) | \
- PIN_ODR_HIGH(GPIOD_PIN4) | \
- PIN_ODR_HIGH(GPIOD_PIN5) | \
- PIN_ODR_HIGH(GPIOD_PIN6) | \
- PIN_ODR_HIGH(GPIOD_PIN7) | \
- PIN_ODR_HIGH(GPIOD_PIN8) | \
- PIN_ODR_HIGH(GPIOD_PIN9) | \
- PIN_ODR_HIGH(GPIOD_PIN10) | \
- PIN_ODR_HIGH(GPIOD_PIN11) | \
- PIN_ODR_HIGH(GPIOD_PIN12) | \
- PIN_ODR_HIGH(GPIOD_PIN13) | \
- PIN_ODR_HIGH(GPIOD_PIN14) | \
- PIN_ODR_HIGH(GPIOD_PIN15))
-#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0) | \
- PIN_AFIO_AF(GPIOD_PIN1, 0) | \
- PIN_AFIO_AF(GPIOD_SD_CMD, 12) | \
- PIN_AFIO_AF(GPIOD_PIN3, 0) | \
- PIN_AFIO_AF(GPIOD_PIN4, 0) | \
- PIN_AFIO_AF(GPIOD_PIN5, 0) | \
- PIN_AFIO_AF(GPIOD_PIN6, 0) | \
- PIN_AFIO_AF(GPIOD_PIN7, 0))
-#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0) | \
- PIN_AFIO_AF(GPIOD_PIN9, 0) | \
- PIN_AFIO_AF(GPIOD_PIN10, 0) | \
- PIN_AFIO_AF(GPIOD_PIN11, 0) | \
- PIN_AFIO_AF(GPIOD_PIN12, 0) | \
- PIN_AFIO_AF(GPIOD_PIN13, 0) | \
- PIN_AFIO_AF(GPIOD_PIN14, 0) | \
- PIN_AFIO_AF(GPIOD_PIN15, 0))
-
-/*
- * GPIOE setup:
- *
- * PE0 - PIN0 (input pullup).
- * PE1 - PIN1 (input pullup).
- * PE2 - PIN2 (input pullup).
- * PE3 - PIN3 (input pullup).
- * PE4 - PIN4 (input pullup).
- * PE5 - PIN5 (input pullup).
- * PE6 - PIN6 (input pullup).
- * PE7 - PIN7 (input pullup).
- * PE8 - PIN8 (input pullup).
- * PE9 - PIN9 (input pullup).
- * PE10 - PIN10 (input pullup).
- * PE11 - PIN11 (input pullup).
- * PE12 - PIN12 (input pullup).
- * PE13 - PIN13 (input pullup).
- * PE14 - PIN14 (input pullup).
- * PE15 - PIN15 (input pullup).
- */
-#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_PIN0) | \
- PIN_MODE_INPUT(GPIOE_PIN1) | \
- PIN_MODE_INPUT(GPIOE_PIN2) | \
- PIN_MODE_INPUT(GPIOE_PIN3) | \
- PIN_MODE_INPUT(GPIOE_PIN4) | \
- PIN_MODE_INPUT(GPIOE_PIN5) | \
- PIN_MODE_INPUT(GPIOE_PIN6) | \
- PIN_MODE_INPUT(GPIOE_PIN7) | \
- PIN_MODE_INPUT(GPIOE_PIN8) | \
- PIN_MODE_INPUT(GPIOE_PIN9) | \
- PIN_MODE_INPUT(GPIOE_PIN10) | \
- PIN_MODE_INPUT(GPIOE_PIN11) | \
- PIN_MODE_INPUT(GPIOE_PIN12) | \
- PIN_MODE_INPUT(GPIOE_PIN13) | \
- PIN_MODE_INPUT(GPIOE_PIN14) | \
- PIN_MODE_INPUT(GPIOE_PIN15))
-#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN1) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN2) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN3) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN4) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN5) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN10) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN14) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN15))
-#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_100M(GPIOE_PIN0) | \
- PIN_OSPEED_100M(GPIOE_PIN1) | \
- PIN_OSPEED_100M(GPIOE_PIN2) | \
- PIN_OSPEED_100M(GPIOE_PIN3) | \
- PIN_OSPEED_100M(GPIOE_PIN4) | \
- PIN_OSPEED_100M(GPIOE_PIN5) | \
- PIN_OSPEED_100M(GPIOE_PIN6) | \
- PIN_OSPEED_100M(GPIOE_PIN7) | \
- PIN_OSPEED_100M(GPIOE_PIN8) | \
- PIN_OSPEED_100M(GPIOE_PIN9) | \
- PIN_OSPEED_100M(GPIOE_PIN10) | \
- PIN_OSPEED_100M(GPIOE_PIN11) | \
- PIN_OSPEED_100M(GPIOE_PIN12) | \
- PIN_OSPEED_100M(GPIOE_PIN13) | \
- PIN_OSPEED_100M(GPIOE_PIN14) | \
- PIN_OSPEED_100M(GPIOE_PIN15))
-#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_PIN0) | \
- PIN_PUPDR_PULLUP(GPIOE_PIN1) | \
- PIN_PUPDR_PULLUP(GPIOE_PIN2) | \
- PIN_PUPDR_PULLUP(GPIOE_PIN3) | \
- PIN_PUPDR_PULLUP(GPIOE_PIN4) | \
- PIN_PUPDR_PULLUP(GPIOE_PIN5) | \
- PIN_PUPDR_PULLUP(GPIOE_PIN6) | \
- PIN_PUPDR_PULLUP(GPIOE_PIN7) | \
- PIN_PUPDR_PULLUP(GPIOE_PIN8) | \
- PIN_PUPDR_PULLUP(GPIOE_PIN9) | \
- PIN_PUPDR_PULLUP(GPIOE_PIN10) | \
- PIN_PUPDR_PULLUP(GPIOE_PIN11) | \
- PIN_PUPDR_PULLUP(GPIOE_PIN12) | \
- PIN_PUPDR_PULLUP(GPIOE_PIN13) | \
- PIN_PUPDR_PULLUP(GPIOE_PIN14) | \
- PIN_PUPDR_PULLUP(GPIOE_PIN15))
-#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_PIN0) | \
- PIN_ODR_HIGH(GPIOE_PIN1) | \
- PIN_ODR_HIGH(GPIOE_PIN2) | \
- PIN_ODR_HIGH(GPIOE_PIN3) | \
- PIN_ODR_HIGH(GPIOE_PIN4) | \
- PIN_ODR_HIGH(GPIOE_PIN5) | \
- PIN_ODR_HIGH(GPIOE_PIN6) | \
- PIN_ODR_HIGH(GPIOE_PIN7) | \
- PIN_ODR_HIGH(GPIOE_PIN8) | \
- PIN_ODR_HIGH(GPIOE_PIN9) | \
- PIN_ODR_HIGH(GPIOE_PIN10) | \
- PIN_ODR_HIGH(GPIOE_PIN11) | \
- PIN_ODR_HIGH(GPIOE_PIN12) | \
- PIN_ODR_HIGH(GPIOE_PIN13) | \
- PIN_ODR_HIGH(GPIOE_PIN14) | \
- PIN_ODR_HIGH(GPIOE_PIN15))
-#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_PIN0, 0) | \
- PIN_AFIO_AF(GPIOE_PIN1, 0) | \
- PIN_AFIO_AF(GPIOE_PIN2, 0) | \
- PIN_AFIO_AF(GPIOE_PIN3, 0) | \
- PIN_AFIO_AF(GPIOE_PIN4, 0) | \
- PIN_AFIO_AF(GPIOE_PIN5, 0) | \
- PIN_AFIO_AF(GPIOE_PIN6, 0) | \
- PIN_AFIO_AF(GPIOE_PIN7, 0))
-#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0) | \
- PIN_AFIO_AF(GPIOE_PIN9, 0) | \
- PIN_AFIO_AF(GPIOE_PIN10, 0) | \
- PIN_AFIO_AF(GPIOE_PIN11, 0) | \
- PIN_AFIO_AF(GPIOE_PIN12, 0) | \
- PIN_AFIO_AF(GPIOE_PIN13, 0) | \
- PIN_AFIO_AF(GPIOE_PIN14, 0) | \
- PIN_AFIO_AF(GPIOE_PIN15, 0))
-
-/*
- * GPIOF setup:
- *
- * PF0 - PIN0 (input pullup).
- * PF1 - PIN1 (input pullup).
- * PF2 - PIN2 (input pullup).
- * PF3 - PIN3 (input pullup).
- * PF4 - PIN4 (input pullup).
- * PF5 - PIN5 (input pullup).
- * PF6 - PIN6 (input pullup).
- * PF7 - PIN7 (input pullup).
- * PF8 - PIN8 (input pullup).
- * PF9 - PIN9 (input pullup).
- * PF10 - PIN10 (input pullup).
- * PF11 - USB_FS_FAULT (input floating).
- * PF12 - PIN12 (input pullup).
- * PF13 - PIN13 (input pullup).
- * PF14 - PIN14 (input pullup).
- * PF15 - PIN15 (input pullup).
- */
-#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_PIN0) | \
- PIN_MODE_INPUT(GPIOF_PIN1) | \
- PIN_MODE_INPUT(GPIOF_PIN2) | \
- PIN_MODE_INPUT(GPIOF_PIN3) | \
- PIN_MODE_INPUT(GPIOF_PIN4) | \
- PIN_MODE_INPUT(GPIOF_PIN5) | \
- PIN_MODE_INPUT(GPIOF_PIN6) | \
- PIN_MODE_INPUT(GPIOF_PIN7) | \
- PIN_MODE_INPUT(GPIOF_PIN8) | \
- PIN_MODE_INPUT(GPIOF_PIN9) | \
- PIN_MODE_INPUT(GPIOF_PIN10) | \
- PIN_MODE_INPUT(GPIOF_USB_FS_FAULT) | \
- PIN_MODE_INPUT(GPIOF_PIN12) | \
- PIN_MODE_INPUT(GPIOF_PIN13) | \
- PIN_MODE_INPUT(GPIOF_PIN14) | \
- PIN_MODE_INPUT(GPIOF_PIN15))
-#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_PIN0) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN1) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | \
- PIN_OTYPE_PUSHPULL(GPIOF_USB_FS_FAULT) |\
- PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN15))
-#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_100M(GPIOF_PIN0) | \
- PIN_OSPEED_100M(GPIOF_PIN1) | \
- PIN_OSPEED_100M(GPIOF_PIN2) | \
- PIN_OSPEED_100M(GPIOF_PIN3) | \
- PIN_OSPEED_100M(GPIOF_PIN4) | \
- PIN_OSPEED_100M(GPIOF_PIN5) | \
- PIN_OSPEED_100M(GPIOF_PIN6) | \
- PIN_OSPEED_100M(GPIOF_PIN7) | \
- PIN_OSPEED_100M(GPIOF_PIN8) | \
- PIN_OSPEED_100M(GPIOF_PIN9) | \
- PIN_OSPEED_100M(GPIOF_PIN10) | \
- PIN_OSPEED_100M(GPIOF_USB_FS_FAULT) | \
- PIN_OSPEED_100M(GPIOF_PIN12) | \
- PIN_OSPEED_100M(GPIOF_PIN13) | \
- PIN_OSPEED_100M(GPIOF_PIN14) | \
- PIN_OSPEED_100M(GPIOF_PIN15))
-#define VAL_GPIOF_PUPDR (PIN_PUPDR_PULLUP(GPIOF_PIN0) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN1) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN2) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN3) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN4) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN5) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN6) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN7) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN8) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN9) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN10) | \
- PIN_PUPDR_FLOATING(GPIOF_USB_FS_FAULT) |\
- PIN_PUPDR_PULLUP(GPIOF_PIN12) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN13) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN14) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN15))
-#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_PIN0) | \
- PIN_ODR_HIGH(GPIOF_PIN1) | \
- PIN_ODR_HIGH(GPIOF_PIN2) | \
- PIN_ODR_HIGH(GPIOF_PIN3) | \
- PIN_ODR_HIGH(GPIOF_PIN4) | \
- PIN_ODR_HIGH(GPIOF_PIN5) | \
- PIN_ODR_HIGH(GPIOF_PIN6) | \
- PIN_ODR_HIGH(GPIOF_PIN7) | \
- PIN_ODR_HIGH(GPIOF_PIN8) | \
- PIN_ODR_HIGH(GPIOF_PIN9) | \
- PIN_ODR_HIGH(GPIOF_PIN10) | \
- PIN_ODR_HIGH(GPIOF_USB_FS_FAULT) | \
- PIN_ODR_HIGH(GPIOF_PIN12) | \
- PIN_ODR_HIGH(GPIOF_PIN13) | \
- PIN_ODR_HIGH(GPIOF_PIN14) | \
- PIN_ODR_HIGH(GPIOF_PIN15))
-#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_PIN0, 0) | \
- PIN_AFIO_AF(GPIOF_PIN1, 0) | \
- PIN_AFIO_AF(GPIOF_PIN2, 0) | \
- PIN_AFIO_AF(GPIOF_PIN3, 0) | \
- PIN_AFIO_AF(GPIOF_PIN4, 0) | \
- PIN_AFIO_AF(GPIOF_PIN5, 0) | \
- PIN_AFIO_AF(GPIOF_PIN6, 0) | \
- PIN_AFIO_AF(GPIOF_PIN7, 0))
-#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0) | \
- PIN_AFIO_AF(GPIOF_PIN9, 0) | \
- PIN_AFIO_AF(GPIOF_PIN10, 0) | \
- PIN_AFIO_AF(GPIOF_USB_FS_FAULT, 0) | \
- PIN_AFIO_AF(GPIOF_PIN12, 0) | \
- PIN_AFIO_AF(GPIOF_PIN13, 0) | \
- PIN_AFIO_AF(GPIOF_PIN14, 0) | \
- PIN_AFIO_AF(GPIOF_PIN15, 0))
-
-/*
- * GPIOG setup:
- *
- * PG0 - PIN0 (input pullup).
- * PG1 - PIN1 (input pullup).
- * PG2 - PIN2 (input pullup).
- * PG3 - PIN3 (input pullup).
- * PG4 - PIN4 (input pullup).
- * PG5 - PIN5 (input pullup).
- * PG6 - PIN6 (input pullup).
- * PG7 - PIN7 (input pullup).
- * PG8 - PIN8 (input pullup).
- * PG9 - PIN9 (input pullup).
- * PG10 - SPI2_CS (output pushpull maximum).
- * PG11 - ETH_RMII_TXEN (alternate 11).
- * PG12 - PIN12 (input pullup).
- * PG13 - ETH_RMII_TXD0 (alternate 11).
- * PG14 - ETH_RMII_TXD1 (alternate 11).
- * PG15 - PIN15 (input pullup).
- */
-#define VAL_GPIOG_MODER (PIN_MODE_INPUT(GPIOG_PIN0) | \
- PIN_MODE_INPUT(GPIOG_PIN1) | \
- PIN_MODE_INPUT(GPIOG_PIN2) | \
- PIN_MODE_INPUT(GPIOG_PIN3) | \
- PIN_MODE_INPUT(GPIOG_PIN4) | \
- PIN_MODE_INPUT(GPIOG_PIN5) | \
- PIN_MODE_INPUT(GPIOG_PIN6) | \
- PIN_MODE_INPUT(GPIOG_PIN7) | \
- PIN_MODE_INPUT(GPIOG_PIN8) | \
- PIN_MODE_INPUT(GPIOG_PIN9) | \
- PIN_MODE_OUTPUT(GPIOG_SPI2_CS) | \
- PIN_MODE_ALTERNATE(GPIOG_ETH_RMII_TXEN) |\
- PIN_MODE_INPUT(GPIOG_PIN12) | \
- PIN_MODE_ALTERNATE(GPIOG_ETH_RMII_TXD0) |\
- PIN_MODE_ALTERNATE(GPIOG_ETH_RMII_TXD1) |\
- PIN_MODE_INPUT(GPIOG_PIN15))
-#define VAL_GPIOG_OTYPER (PIN_OTYPE_PUSHPULL(GPIOG_PIN0) | \
- PIN_OTYPE_PUSHPULL(GPIOG_PIN1) | \
- PIN_OTYPE_PUSHPULL(GPIOG_PIN2) | \
- PIN_OTYPE_PUSHPULL(GPIOG_PIN3) | \
- PIN_OTYPE_PUSHPULL(GPIOG_PIN4) | \
- PIN_OTYPE_PUSHPULL(GPIOG_PIN5) | \
- PIN_OTYPE_PUSHPULL(GPIOG_PIN6) | \
- PIN_OTYPE_PUSHPULL(GPIOG_PIN7) | \
- PIN_OTYPE_PUSHPULL(GPIOG_PIN8) | \
- PIN_OTYPE_PUSHPULL(GPIOG_PIN9) | \
- PIN_OTYPE_PUSHPULL(GPIOG_SPI2_CS) | \
- PIN_OTYPE_PUSHPULL(GPIOG_ETH_RMII_TXEN) |\
- PIN_OTYPE_PUSHPULL(GPIOG_PIN12) | \
- PIN_OTYPE_PUSHPULL(GPIOG_ETH_RMII_TXD0) |\
- PIN_OTYPE_PUSHPULL(GPIOG_ETH_RMII_TXD1) |\
- PIN_OTYPE_PUSHPULL(GPIOG_PIN15))
-#define VAL_GPIOG_OSPEEDR (PIN_OSPEED_100M(GPIOG_PIN0) | \
- PIN_OSPEED_100M(GPIOG_PIN1) | \
- PIN_OSPEED_100M(GPIOG_PIN2) | \
- PIN_OSPEED_100M(GPIOG_PIN3) | \
- PIN_OSPEED_100M(GPIOG_PIN4) | \
- PIN_OSPEED_100M(GPIOG_PIN5) | \
- PIN_OSPEED_100M(GPIOG_PIN6) | \
- PIN_OSPEED_100M(GPIOG_PIN7) | \
- PIN_OSPEED_100M(GPIOG_PIN8) | \
- PIN_OSPEED_100M(GPIOG_PIN9) | \
- PIN_OSPEED_100M(GPIOG_SPI2_CS) | \
- PIN_OSPEED_100M(GPIOG_ETH_RMII_TXEN) | \
- PIN_OSPEED_100M(GPIOG_PIN12) | \
- PIN_OSPEED_100M(GPIOG_ETH_RMII_TXD0) | \
- PIN_OSPEED_100M(GPIOG_ETH_RMII_TXD1) | \
- PIN_OSPEED_100M(GPIOG_PIN15))
-#define VAL_GPIOG_PUPDR (PIN_PUPDR_PULLUP(GPIOG_PIN0) | \
- PIN_PUPDR_PULLUP(GPIOG_PIN1) | \
- PIN_PUPDR_PULLUP(GPIOG_PIN2) | \
- PIN_PUPDR_PULLUP(GPIOG_PIN3) | \
- PIN_PUPDR_PULLUP(GPIOG_PIN4) | \
- PIN_PUPDR_PULLUP(GPIOG_PIN5) | \
- PIN_PUPDR_PULLUP(GPIOG_PIN6) | \
- PIN_PUPDR_PULLUP(GPIOG_PIN7) | \
- PIN_PUPDR_PULLUP(GPIOG_PIN8) | \
- PIN_PUPDR_PULLUP(GPIOG_PIN9) | \
- PIN_PUPDR_FLOATING(GPIOG_SPI2_CS) | \
- PIN_PUPDR_FLOATING(GPIOG_ETH_RMII_TXEN) |\
- PIN_PUPDR_PULLUP(GPIOG_PIN12) | \
- PIN_PUPDR_FLOATING(GPIOG_ETH_RMII_TXD0) |\
- PIN_PUPDR_FLOATING(GPIOG_ETH_RMII_TXD1) |\
- PIN_PUPDR_PULLUP(GPIOG_PIN15))
-#define VAL_GPIOG_ODR (PIN_ODR_HIGH(GPIOG_PIN0) | \
- PIN_ODR_HIGH(GPIOG_PIN1) | \
- PIN_ODR_HIGH(GPIOG_PIN2) | \
- PIN_ODR_HIGH(GPIOG_PIN3) | \
- PIN_ODR_HIGH(GPIOG_PIN4) | \
- PIN_ODR_HIGH(GPIOG_PIN5) | \
- PIN_ODR_HIGH(GPIOG_PIN6) | \
- PIN_ODR_HIGH(GPIOG_PIN7) | \
- PIN_ODR_HIGH(GPIOG_PIN8) | \
- PIN_ODR_HIGH(GPIOG_PIN9) | \
- PIN_ODR_HIGH(GPIOG_SPI2_CS) | \
- PIN_ODR_HIGH(GPIOG_ETH_RMII_TXEN) | \
- PIN_ODR_HIGH(GPIOG_PIN12) | \
- PIN_ODR_HIGH(GPIOG_ETH_RMII_TXD0) | \
- PIN_ODR_HIGH(GPIOG_ETH_RMII_TXD1) | \
- PIN_ODR_HIGH(GPIOG_PIN15))
-#define VAL_GPIOG_AFRL (PIN_AFIO_AF(GPIOG_PIN0, 0) | \
- PIN_AFIO_AF(GPIOG_PIN1, 0) | \
- PIN_AFIO_AF(GPIOG_PIN2, 0) | \
- PIN_AFIO_AF(GPIOG_PIN3, 0) | \
- PIN_AFIO_AF(GPIOG_PIN4, 0) | \
- PIN_AFIO_AF(GPIOG_PIN5, 0) | \
- PIN_AFIO_AF(GPIOG_PIN6, 0) | \
- PIN_AFIO_AF(GPIOG_PIN7, 0))
-#define VAL_GPIOG_AFRH (PIN_AFIO_AF(GPIOG_PIN8, 0) | \
- PIN_AFIO_AF(GPIOG_PIN9, 0) | \
- PIN_AFIO_AF(GPIOG_SPI2_CS, 0) | \
- PIN_AFIO_AF(GPIOG_ETH_RMII_TXEN, 11) | \
- PIN_AFIO_AF(GPIOG_PIN12, 0) | \
- PIN_AFIO_AF(GPIOG_ETH_RMII_TXD0, 11) | \
- PIN_AFIO_AF(GPIOG_ETH_RMII_TXD1, 11) | \
- PIN_AFIO_AF(GPIOG_PIN15, 0))
-
-/*
- * GPIOH setup:
- *
- * PH0 - OSC_IN (input floating).
- * PH1 - OSC_OUT (input floating).
- * PH2 - PIN2 (input pullup).
- * PH3 - PIN3 (input pullup).
- * PH4 - PIN4 (input pullup).
- * PH5 - PIN5 (input pullup).
- * PH6 - PIN6 (input pullup).
- * PH7 - PIN7 (input pullup).
- * PH8 - PIN8 (input pullup).
- * PH9 - PIN9 (input pullup).
- * PH10 - PIN10 (input pullup).
- * PH11 - PIN11 (input pullup).
- * PH12 - PIN12 (input pullup).
- * PH13 - PIN13 (input pullup).
- * PH14 - PIN14 (input pullup).
- * PH15 - PIN15 (input pullup).
- */
-#define VAL_GPIOH_MODER (PIN_MODE_INPUT(GPIOH_OSC_IN) | \
- PIN_MODE_INPUT(GPIOH_OSC_OUT) | \
- PIN_MODE_INPUT(GPIOH_PIN2) | \
- PIN_MODE_INPUT(GPIOH_PIN3) | \
- PIN_MODE_INPUT(GPIOH_PIN4) | \
- PIN_MODE_INPUT(GPIOH_PIN5) | \
- PIN_MODE_INPUT(GPIOH_PIN6) | \
- PIN_MODE_INPUT(GPIOH_PIN7) | \
- PIN_MODE_INPUT(GPIOH_PIN8) | \
- PIN_MODE_INPUT(GPIOH_PIN9) | \
- PIN_MODE_INPUT(GPIOH_PIN10) | \
- PIN_MODE_INPUT(GPIOH_PIN11) | \
- PIN_MODE_INPUT(GPIOH_PIN12) | \
- PIN_MODE_INPUT(GPIOH_PIN13) | \
- PIN_MODE_INPUT(GPIOH_PIN14) | \
- PIN_MODE_INPUT(GPIOH_PIN15))
-#define VAL_GPIOH_OTYPER (PIN_OTYPE_PUSHPULL(GPIOH_OSC_IN) | \
- PIN_OTYPE_PUSHPULL(GPIOH_OSC_OUT) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN2) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN3) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN4) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN5) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN6) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN7) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN8) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN9) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN10) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN11) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN12) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN13) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN14) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN15))
-#define VAL_GPIOH_OSPEEDR (PIN_OSPEED_100M(GPIOH_OSC_IN) | \
- PIN_OSPEED_100M(GPIOH_OSC_OUT) | \
- PIN_OSPEED_100M(GPIOH_PIN2) | \
- PIN_OSPEED_100M(GPIOH_PIN3) | \
- PIN_OSPEED_100M(GPIOH_PIN4) | \
- PIN_OSPEED_100M(GPIOH_PIN5) | \
- PIN_OSPEED_100M(GPIOH_PIN6) | \
- PIN_OSPEED_100M(GPIOH_PIN7) | \
- PIN_OSPEED_100M(GPIOH_PIN8) | \
- PIN_OSPEED_100M(GPIOH_PIN9) | \
- PIN_OSPEED_100M(GPIOH_PIN10) | \
- PIN_OSPEED_100M(GPIOH_PIN11) | \
- PIN_OSPEED_100M(GPIOH_PIN12) | \
- PIN_OSPEED_100M(GPIOH_PIN13) | \
- PIN_OSPEED_100M(GPIOH_PIN14) | \
- PIN_OSPEED_100M(GPIOH_PIN15))
-#define VAL_GPIOH_PUPDR (PIN_PUPDR_FLOATING(GPIOH_OSC_IN) | \
- PIN_PUPDR_FLOATING(GPIOH_OSC_OUT) | \
- PIN_PUPDR_PULLUP(GPIOH_PIN2) | \
- PIN_PUPDR_PULLUP(GPIOH_PIN3) | \
- PIN_PUPDR_PULLUP(GPIOH_PIN4) | \
- PIN_PUPDR_PULLUP(GPIOH_PIN5) | \
- PIN_PUPDR_PULLUP(GPIOH_PIN6) | \
- PIN_PUPDR_PULLUP(GPIOH_PIN7) | \
- PIN_PUPDR_PULLUP(GPIOH_PIN8) | \
- PIN_PUPDR_PULLUP(GPIOH_PIN9) | \
- PIN_PUPDR_PULLUP(GPIOH_PIN10) | \
- PIN_PUPDR_PULLUP(GPIOH_PIN11) | \
- PIN_PUPDR_PULLUP(GPIOH_PIN12) | \
- PIN_PUPDR_PULLUP(GPIOH_PIN13) | \
- PIN_PUPDR_PULLUP(GPIOH_PIN14) | \
- PIN_PUPDR_PULLUP(GPIOH_PIN15))
-#define VAL_GPIOH_ODR (PIN_ODR_HIGH(GPIOH_OSC_IN) | \
- PIN_ODR_HIGH(GPIOH_OSC_OUT) | \
- PIN_ODR_HIGH(GPIOH_PIN2) | \
- PIN_ODR_HIGH(GPIOH_PIN3) | \
- PIN_ODR_HIGH(GPIOH_PIN4) | \
- PIN_ODR_HIGH(GPIOH_PIN5) | \
- PIN_ODR_HIGH(GPIOH_PIN6) | \
- PIN_ODR_HIGH(GPIOH_PIN7) | \
- PIN_ODR_HIGH(GPIOH_PIN8) | \
- PIN_ODR_HIGH(GPIOH_PIN9) | \
- PIN_ODR_HIGH(GPIOH_PIN10) | \
- PIN_ODR_HIGH(GPIOH_PIN11) | \
- PIN_ODR_HIGH(GPIOH_PIN12) | \
- PIN_ODR_HIGH(GPIOH_PIN13) | \
- PIN_ODR_HIGH(GPIOH_PIN14) | \
- PIN_ODR_HIGH(GPIOH_PIN15))
-#define VAL_GPIOH_AFRL (PIN_AFIO_AF(GPIOH_OSC_IN, 0) | \
- PIN_AFIO_AF(GPIOH_OSC_OUT, 0) | \
- PIN_AFIO_AF(GPIOH_PIN2, 0) | \
- PIN_AFIO_AF(GPIOH_PIN3, 0) | \
- PIN_AFIO_AF(GPIOH_PIN4, 0) | \
- PIN_AFIO_AF(GPIOH_PIN5, 0) | \
- PIN_AFIO_AF(GPIOH_PIN6, 0) | \
- PIN_AFIO_AF(GPIOH_PIN7, 0))
-#define VAL_GPIOH_AFRH (PIN_AFIO_AF(GPIOH_PIN8, 0) | \
- PIN_AFIO_AF(GPIOH_PIN9, 0) | \
- PIN_AFIO_AF(GPIOH_PIN10, 0) | \
- PIN_AFIO_AF(GPIOH_PIN11, 0) | \
- PIN_AFIO_AF(GPIOH_PIN12, 0) | \
- PIN_AFIO_AF(GPIOH_PIN13, 0) | \
- PIN_AFIO_AF(GPIOH_PIN14, 0) | \
- PIN_AFIO_AF(GPIOH_PIN15, 0))
-
-/*
- * GPIOI setup:
- *
- * PI0 - PIN0 (input pullup).
- * PI1 - PIN1 (input pullup).
- * PI2 - PIN2 (input pullup).
- * PI3 - PIN3 (input pullup).
- * PI4 - PIN4 (input pullup).
- * PI5 - PIN5 (input pullup).
- * PI6 - PIN6 (input pullup).
- * PI7 - PIN7 (input pullup).
- * PI8 - PIN8 (input pullup).
- * PI9 - PIN9 (input pullup).
- * PI10 - PIN10 (input pullup).
- * PI11 - PIN11 (input pullup).
- * PI12 - PIN12 (input pullup).
- * PI13 - PIN13 (input pullup).
- * PI14 - PIN14 (input pullup).
- * PI15 - PIN15 (input pullup).
- */
-#define VAL_GPIOI_MODER (PIN_MODE_INPUT(GPIOI_PIN0) | \
- PIN_MODE_INPUT(GPIOI_PIN1) | \
- PIN_MODE_INPUT(GPIOI_PIN2) | \
- PIN_MODE_INPUT(GPIOI_PIN3) | \
- PIN_MODE_INPUT(GPIOI_PIN4) | \
- PIN_MODE_INPUT(GPIOI_PIN5) | \
- PIN_MODE_INPUT(GPIOI_PIN6) | \
- PIN_MODE_INPUT(GPIOI_PIN7) | \
- PIN_MODE_INPUT(GPIOI_PIN8) | \
- PIN_MODE_INPUT(GPIOI_PIN9) | \
- PIN_MODE_INPUT(GPIOI_PIN10) | \
- PIN_MODE_INPUT(GPIOI_PIN11) | \
- PIN_MODE_INPUT(GPIOI_PIN12) | \
- PIN_MODE_INPUT(GPIOI_PIN13) | \
- PIN_MODE_INPUT(GPIOI_PIN14) | \
- PIN_MODE_INPUT(GPIOI_PIN15))
-#define VAL_GPIOI_OTYPER (PIN_OTYPE_PUSHPULL(GPIOI_PIN0) | \
- PIN_OTYPE_PUSHPULL(GPIOI_PIN1) | \
- PIN_OTYPE_PUSHPULL(GPIOI_PIN2) | \
- PIN_OTYPE_PUSHPULL(GPIOI_PIN3) | \
- PIN_OTYPE_PUSHPULL(GPIOI_PIN4) | \
- PIN_OTYPE_PUSHPULL(GPIOI_PIN5) | \
- PIN_OTYPE_PUSHPULL(GPIOI_PIN6) | \
- PIN_OTYPE_PUSHPULL(GPIOI_PIN7) | \
- PIN_OTYPE_PUSHPULL(GPIOI_PIN8) | \
- PIN_OTYPE_PUSHPULL(GPIOI_PIN9) | \
- PIN_OTYPE_PUSHPULL(GPIOI_PIN10) | \
- PIN_OTYPE_PUSHPULL(GPIOI_PIN11) | \
- PIN_OTYPE_PUSHPULL(GPIOI_PIN12) | \
- PIN_OTYPE_PUSHPULL(GPIOI_PIN13) | \
- PIN_OTYPE_PUSHPULL(GPIOI_PIN14) | \
- PIN_OTYPE_PUSHPULL(GPIOI_PIN15))
-#define VAL_GPIOI_OSPEEDR (PIN_OSPEED_100M(GPIOI_PIN0) | \
- PIN_OSPEED_100M(GPIOI_PIN1) | \
- PIN_OSPEED_100M(GPIOI_PIN2) | \
- PIN_OSPEED_100M(GPIOI_PIN3) | \
- PIN_OSPEED_100M(GPIOI_PIN4) | \
- PIN_OSPEED_100M(GPIOI_PIN5) | \
- PIN_OSPEED_100M(GPIOI_PIN6) | \
- PIN_OSPEED_100M(GPIOI_PIN7) | \
- PIN_OSPEED_100M(GPIOI_PIN8) | \
- PIN_OSPEED_100M(GPIOI_PIN9) | \
- PIN_OSPEED_100M(GPIOI_PIN10) | \
- PIN_OSPEED_100M(GPIOI_PIN11) | \
- PIN_OSPEED_100M(GPIOI_PIN12) | \
- PIN_OSPEED_100M(GPIOI_PIN13) | \
- PIN_OSPEED_100M(GPIOI_PIN14) | \
- PIN_OSPEED_100M(GPIOI_PIN15))
-#define VAL_GPIOI_PUPDR (PIN_PUPDR_PULLUP(GPIOI_PIN0) | \
- PIN_PUPDR_PULLUP(GPIOI_PIN1) | \
- PIN_PUPDR_PULLUP(GPIOI_PIN2) | \
- PIN_PUPDR_PULLUP(GPIOI_PIN3) | \
- PIN_PUPDR_PULLUP(GPIOI_PIN4) | \
- PIN_PUPDR_PULLUP(GPIOI_PIN5) | \
- PIN_PUPDR_PULLUP(GPIOI_PIN6) | \
- PIN_PUPDR_PULLUP(GPIOI_PIN7) | \
- PIN_PUPDR_PULLUP(GPIOI_PIN8) | \
- PIN_PUPDR_PULLUP(GPIOI_PIN9) | \
- PIN_PUPDR_PULLUP(GPIOI_PIN10) | \
- PIN_PUPDR_PULLUP(GPIOI_PIN11) | \
- PIN_PUPDR_PULLUP(GPIOI_PIN12) | \
- PIN_PUPDR_PULLUP(GPIOI_PIN13) | \
- PIN_PUPDR_PULLUP(GPIOI_PIN14) | \
- PIN_PUPDR_PULLUP(GPIOI_PIN15))
-#define VAL_GPIOI_ODR (PIN_ODR_HIGH(GPIOI_PIN0) | \
- PIN_ODR_HIGH(GPIOI_PIN1) | \
- PIN_ODR_HIGH(GPIOI_PIN2) | \
- PIN_ODR_HIGH(GPIOI_PIN3) | \
- PIN_ODR_HIGH(GPIOI_PIN4) | \
- PIN_ODR_HIGH(GPIOI_PIN5) | \
- PIN_ODR_HIGH(GPIOI_PIN6) | \
- PIN_ODR_HIGH(GPIOI_PIN7) | \
- PIN_ODR_HIGH(GPIOI_PIN8) | \
- PIN_ODR_HIGH(GPIOI_PIN9) | \
- PIN_ODR_HIGH(GPIOI_PIN10) | \
- PIN_ODR_HIGH(GPIOI_PIN11) | \
- PIN_ODR_HIGH(GPIOI_PIN12) | \
- PIN_ODR_HIGH(GPIOI_PIN13) | \
- PIN_ODR_HIGH(GPIOI_PIN14) | \
- PIN_ODR_HIGH(GPIOI_PIN15))
-#define VAL_GPIOI_AFRL (PIN_AFIO_AF(GPIOI_PIN0, 0) | \
- PIN_AFIO_AF(GPIOI_PIN1, 0) | \
- PIN_AFIO_AF(GPIOI_PIN2, 0) | \
- PIN_AFIO_AF(GPIOI_PIN3, 0) | \
- PIN_AFIO_AF(GPIOI_PIN4, 0) | \
- PIN_AFIO_AF(GPIOI_PIN5, 0) | \
- PIN_AFIO_AF(GPIOI_PIN6, 0) | \
- PIN_AFIO_AF(GPIOI_PIN7, 0))
-#define VAL_GPIOI_AFRH (PIN_AFIO_AF(GPIOI_PIN8, 0) | \
- PIN_AFIO_AF(GPIOI_PIN9, 0) | \
- PIN_AFIO_AF(GPIOI_PIN10, 0) | \
- PIN_AFIO_AF(GPIOI_PIN11, 0) | \
- PIN_AFIO_AF(GPIOI_PIN12, 0) | \
- PIN_AFIO_AF(GPIOI_PIN13, 0) | \
- PIN_AFIO_AF(GPIOI_PIN14, 0) | \
- PIN_AFIO_AF(GPIOI_PIN15, 0))
-
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
diff --git a/boards/OLIMEX_STM32_E407/board.mk b/boards/OLIMEX_STM32_E407/board.mk deleted file mode 100644 index 0f9c9e4a7..000000000 --- a/boards/OLIMEX_STM32_E407/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files.
-BOARDSRC = ${CHIBIOS}/boards/OLIMEX_STM32_E407/board.c
-
-# Required include directories
-BOARDINC = ${CHIBIOS}/boards/OLIMEX_STM32_E407
diff --git a/boards/OLIMEX_STM32_E407/cfg/board.chcfg b/boards/OLIMEX_STM32_E407/cfg/board.chcfg deleted file mode 100644 index 4d4abeb04..000000000 --- a/boards/OLIMEX_STM32_E407/cfg/board.chcfg +++ /dev/null @@ -1,335 +0,0 @@ -<?xml version="1.0" encoding="UTF-8"?>
-<!-- STM32F4xx board Template -->
-<board xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
- xsi:noNamespaceSchemaLocation="http://www.chibios.org/xml/schema/boards/stm32f4xx_board.xsd">
- <configuration_settings>
- <templates_path>resources/gencfg/processors/boards/stm32f4xx/templates</templates_path>
- <output_path>..</output_path>
- </configuration_settings>
- <board_name>Olimex STM32-E407</board_name>
- <board_id>OLIMEX_STM32_E407</board_id>
- <board_functions>
- <sdc_lld_is_card_inserted><![CDATA[ static bool_t last_status = FALSE;
-
- if (blkIsTransferring(sdcp))
- return last_status;
- return last_status = (bool_t)palReadPad(GPIOC, GPIOC_SD_D3);]]></sdc_lld_is_card_inserted>
- <sdc_lld_is_write_protected>
-<![CDATA[ (void)sdcp;
- return FALSE;]]></sdc_lld_is_write_protected>
- </board_functions>
- <ethernet_phy>
- <identifier>MII_KS8721_ID</identifier>
- <bus_type>RMII</bus_type>
- </ethernet_phy>
- <clocks HSEFrequency="12000000" HSEBypass="false" LSEFrequency="32768"
- VDD="330" />
- <ports>
- <GPIOA>
- <pin0 ID="BUTTON_WKUP" Type="PushPull" Speed="Maximum" Resistor="Floating"
- Level="High" Mode="Input" Alternate="0" />
- <pin1 ID="ETH_RMII_REF_CLK" Type="PushPull" Speed="Maximum"
- Resistor="Floating" Level="High" Mode="Alternate" Alternate="11" />
- <pin2 ID="ETH_RMII_MDIO" Type="PushPull" Speed="Maximum"
- Resistor="Floating" Level="High" Mode="Alternate" Alternate="11" />
- <pin3 ID="ETH_RMII_MDINT" Type="PushPull" Speed="Maximum"
- Resistor="Floating" Level="High" Mode="Input" Alternate="0" />
- <pin4 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin5 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin6 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin7 ID="ETH_RMII_CRS_DV" Type="PushPull" Speed="Maximum"
- Resistor="Floating" Level="High" Mode="Alternate" Alternate="11" />
- <pin8 ID="USB_HS_BUSON" Type="PushPull" Speed="Maximum"
- Resistor="Floating" Level="High" Mode="Output" Alternate="0" />
- <pin9 ID="OTG_FS_VBUS" Type="PushPull" Speed="Maximum" Resistor="PullDown"
- Level="High" Mode="Input" Alternate="0" />
- <pin10 ID="OTG_FS_ID" Type="PushPull" Speed="Maximum" Resistor="Floating"
- Level="High" Mode="Alternate" Alternate="10" />
- <pin11 ID="OTG_FS_DM" Type="PushPull" Speed="Maximum" Resistor="Floating"
- Level="High" Mode="Alternate" Alternate="10" />
- <pin12 ID="OTG_FS_DP" Type="PushPull" Speed="Maximum" Resistor="Floating"
- Level="High" Mode="Alternate" Alternate="10" />
- <pin13 ID="JTAG_TMS" Type="PushPull" Speed="Maximum" Resistor="Floating"
- Level="High" Mode="Alternate" Alternate="0" />
- <pin14 ID="JTAG_TCK" Type="PushPull" Speed="Maximum" Resistor="PullDown"
- Level="High" Mode="Alternate" Alternate="0" />
- <pin15 ID="JTAG_TDI" Type="PushPull" Speed="Maximum" Resistor="Floating"
- Level="High" Mode="Alternate" Alternate="0" />
- </GPIOA>
- <GPIOB>
- <pin0 ID="USB_FS_BUSON" Type="PushPull" Speed="Maximum"
- Resistor="Floating" Level="High" Mode="Output" Alternate="0" />
- <pin1 ID="USB_HS_FAULT" Type="PushPull" Speed="Maximum"
- Resistor="Floating" Level="High" Mode="Input" Alternate="0" />
- <pin2 ID="BOOT1" Type="PushPull" Speed="Maximum" Resistor="Floating"
- Level="High" Mode="Input" Alternate="0" />
- <pin3 ID="JTAG_TDO" Type="PushPull" Speed="Maximum" Resistor="Floating"
- Level="High" Mode="Alternate" Alternate="0" />
- <pin4 ID="JTAG_TRST" Type="PushPull" Speed="Maximum" Resistor="Floating"
- Level="High" Mode="Alternate" Alternate="0" />
- <pin5 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin6 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin7 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin8 ID="I2C1_SCL" Type="OpenDrain" Speed="Maximum" Resistor="Floating"
- Level="High" Mode="Alternate" Alternate="4" />
- <pin9 ID="I2C1_SDA" Type="OpenDrain" Speed="Maximum" Resistor="Floating"
- Level="High" Mode="Alternate" Alternate="4" />
- <pin10 ID="SPI2_SCK" Type="PushPull" Speed="Maximum" Resistor="Floating"
- Level="High" Mode="Alternate" Alternate="5" />
- <pin11 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin12 ID="OTG_HS_ID" Type="PushPull" Speed="Maximum" Resistor="Floating"
- Level="High" Mode="Alternate" Alternate="12" />
- <pin13 ID="OTG_HS_VBUS" Type="PushPull" Speed="Maximum"
- Resistor="PullDown" Level="High" Mode="Input" Alternate="0" />
- <pin14 ID="OTG_HS_DM" Type="PushPull" Speed="Maximum" Resistor="Floating"
- Level="High" Mode="Alternate" Alternate="12" />
- <pin15 ID="OTG_HS_DP" Type="PushPull" Speed="Maximum" Resistor="Floating"
- Level="High" Mode="Alternate" Alternate="12" />
- </GPIOB>
- <GPIOC>
- <pin0 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin1 ID="ETH_RMII_MDC" Type="PushPull" Speed="Maximum"
- Resistor="Floating" Level="High" Mode="Alternate" Alternate="11" />
- <pin2 ID="SPI2_MISO" Type="PushPull" Speed="Maximum" Resistor="Floating"
- Level="High" Mode="Alternate" Alternate="5" />
- <pin3 ID="SPI2_MOSI" Type="PushPull" Speed="Maximum" Resistor="Floating"
- Level="High" Mode="Alternate" Alternate="5" />
- <pin4 ID="ETH_RMII_RXD0" Type="PushPull" Speed="Maximum"
- Resistor="Floating" Level="High" Mode="Alternate" Alternate="11" />
- <pin5 ID="ETH_RMII_RXD1" Type="PushPull" Speed="Maximum"
- Resistor="Floating" Level="High" Mode="Alternate" Alternate="11" />
- <pin6 ID="USART6_TX" Type="PushPull" Speed="Maximum" Resistor="Floating"
- Level="High" Mode="Alternate" Alternate="8" />
- <pin7 ID="USART6_RX" Type="PushPull" Speed="Maximum" Resistor="Floating"
- Level="High" Mode="Alternate" Alternate="8" />
- <pin8 ID="SD_D0" Type="PushPull" Speed="Maximum" Resistor="Floating"
- Level="High" Mode="Alternate" Alternate="12" />
- <pin9 ID="SD_D1" Type="PushPull" Speed="Maximum" Resistor="Floating"
- Level="High" Mode="Alternate" Alternate="12" />
- <pin10 ID="SD_D2" Type="PushPull" Speed="Maximum" Resistor="Floating"
- Level="High" Mode="Alternate" Alternate="12" />
- <pin11 ID="SD_D3" Type="PushPull" Speed="Maximum" Resistor="Floating"
- Level="High" Mode="Alternate" Alternate="12" />
- <pin12 ID="SD_CLK" Type="PushPull" Speed="Maximum" Resistor="Floating"
- Level="High" Mode="Alternate" Alternate="12" />
- <pin13 ID="LED" Type="PushPull" Speed="Maximum" Resistor="Floating"
- Level="High" Mode="Output" Alternate="0" />
- <pin14 ID="OSC32_IN" Type="PushPull" Speed="Maximum" Resistor="Floating"
- Level="High" Mode="Input" Alternate="0" />
- <pin15 ID="OSC32_OUT" Type="PushPull" Speed="Maximum" Resistor="Floating"
- Level="High" Mode="Input" Alternate="0" />
- </GPIOC>
- <GPIOD>
- <pin0 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin1 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin2 ID="SD_CMD" Type="PushPull" Speed="Maximum" Resistor="Floating"
- Level="High" Mode="Alternate" Alternate="12" />
- <pin3 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin4 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin5 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin6 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin7 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin8 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin9 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin10 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin11 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin12 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin13 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin14 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin15 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- </GPIOD>
- <GPIOE>
- <pin0 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin1 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin2 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin3 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin4 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin5 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin6 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin7 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin8 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin9 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin10 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin11 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin12 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin13 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin14 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin15 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- </GPIOE>
- <GPIOF>
- <pin0 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin1 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin2 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin3 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin4 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin5 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin6 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin7 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin8 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin9 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin10 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin11 ID="USB_FS_FAULT" Type="PushPull" Speed="Maximum"
- Resistor="Floating" Level="High" Mode="Input" Alternate="0" />
- <pin12 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin13 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin14 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin15 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- </GPIOF>
- <GPIOG>
- <pin0 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin1 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin2 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin3 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin4 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin5 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin6 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin7 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin8 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin9 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin10 ID="SPI2_CS" Type="PushPull" Speed="Maximum" Resistor="Floating"
- Level="High" Mode="Output" Alternate="0" />
- <pin11 ID="ETH_RMII_TXEN" Type="PushPull" Speed="Maximum"
- Resistor="Floating" Level="High" Mode="Alternate" Alternate="11" />
- <pin12 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin13 ID="ETH_RMII_TXD0" Type="PushPull" Speed="Maximum"
- Resistor="Floating" Level="High" Mode="Alternate" Alternate="11" />
- <pin14 ID="ETH_RMII_TXD1" Type="PushPull" Speed="Maximum"
- Resistor="Floating" Level="High" Mode="Alternate" Alternate="11" />
- <pin15 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- </GPIOG>
- <GPIOH>
- <pin0 ID="OSC_IN" Type="PushPull" Speed="Maximum" Resistor="Floating"
- Level="High" Mode="Input" Alternate="0"></pin0>
- <pin1 ID="OSC_OUT" Type="PushPull" Speed="Maximum" Resistor="Floating"
- Level="High" Mode="Input" Alternate="0" />
- <pin2 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin3 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin4 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin5 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin6 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin7 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin8 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin9 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin10 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin11 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin12 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin13 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin14 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin15 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- </GPIOH>
- <GPIOI>
- <pin0 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin1 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin2 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin3 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin4 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin5 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin6 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin7 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin8 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin9 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin10 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin11 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin12 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin13 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin14 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- <pin15 ID="" Type="PushPull" Speed="Maximum" Resistor="PullUp"
- Level="High" Mode="Input" Alternate="0" />
- </GPIOI>
- </ports>
-</board>
diff --git a/boards/OLIMEX_STM32_H103/board.c b/boards/OLIMEX_STM32_H103/board.c deleted file mode 100644 index 91ae5c34a..000000000 --- a/boards/OLIMEX_STM32_H103/board.c +++ /dev/null @@ -1,50 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-/**
- * @brief PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- * This variable is used by the HAL when initializing the PAL driver.
- */
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-const PALConfig pal_default_config =
-{
- {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH},
- {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH},
- {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH},
- {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH},
- {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH},
-};
-#endif
-
-/*
- * Early initialization code.
- * This initialization must be performed just after stack setup and before
- * any other initialization.
- */
-void __early_init(void) {
-
- stm32_clock_init();
-}
-
-/*
- * Board-specific initialization code.
- */
-void boardInit(void) {
-}
diff --git a/boards/OLIMEX_STM32_H103/board.h b/boards/OLIMEX_STM32_H103/board.h deleted file mode 100644 index 76c66099d..000000000 --- a/boards/OLIMEX_STM32_H103/board.h +++ /dev/null @@ -1,132 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for the Olimex STM33-H103 proto board.
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_OLIMEX_STM32_H103
-#define BOARD_NAME "Olimex STM32-H103"
-
-/*
- * Board frequencies.
- */
-#define STM32_LSECLK 32768
-#define STM32_HSECLK 8000000
-
-/*
- * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
- */
-#define STM32F10X_MD
-
-/*
- * IO pins assignments.
- */
-#define GPIOA_BUTTON 0
-
-#define GPIOC_USB_DISC 11
-#define GPIOC_LED 12
-
-/*
- * I/O ports initial setup, this configuration is established soon after reset
- * in the initialization code.
- *
- * The digits have the following meaning:
- * 0 - Analog input.
- * 1 - Push Pull output 10MHz.
- * 2 - Push Pull output 2MHz.
- * 3 - Push Pull output 50MHz.
- * 4 - Digital input.
- * 5 - Open Drain output 10MHz.
- * 6 - Open Drain output 2MHz.
- * 7 - Open Drain output 50MHz.
- * 8 - Digital input with PullUp or PullDown resistor depending on ODR.
- * 9 - Alternate Push Pull output 10MHz.
- * A - Alternate Push Pull output 2MHz.
- * B - Alternate Push Pull output 50MHz.
- * C - Reserved.
- * D - Alternate Open Drain output 10MHz.
- * E - Alternate Open Drain output 2MHz.
- * F - Alternate Open Drain output 50MHz.
- * Please refer to the STM32 Reference Manual for details.
- */
-
-/*
- * Port A setup.
- * Everything input with pull-up except:
- * PA0 - Normal input (BUTTON).
- * PA2 - Alternate output (USART2 TX).
- * PA3 - Normal input (USART2 RX).
- */
-#define VAL_GPIOACRL 0x88884B84 /* PA7...PA0 */
-#define VAL_GPIOACRH 0x88888888 /* PA15...PA8 */
-#define VAL_GPIOAODR 0xFFFFFFFF
-
-/*
- * Port B setup.
- * Everything input with pull-up except:
- */
-#define VAL_GPIOBCRL 0x88888888 /* PB7...PB0 */
-#define VAL_GPIOBCRH 0x88888888 /* PB15...PB8 */
-#define VAL_GPIOBODR 0xFFFFFFFF
-
-/*
- * Port C setup.
- * Everything input with pull-up except:
- * PC6 - Normal input because there is an external resistor.
- * PC7 - Normal input because there is an external resistor.
- * PC11 - Open Drain output (USB disconnect).
- * PC12 - Push Pull output (LED).
- */
-#define VAL_GPIOCCRL 0x44888888 /* PC7...PC0 */
-#define VAL_GPIOCCRH 0x88837888 /* PC15...PC8 */
-#define VAL_GPIOCODR 0xFFFFFFFF
-
-/*
- * Port D setup.
- * Everything input with pull-up except:
- * PD0 - Normal input (XTAL).
- * PD1 - Normal input (XTAL).
- */
-#define VAL_GPIODCRL 0x88888844 /* PD7...PD0 */
-#define VAL_GPIODCRH 0x88888888 /* PD15...PD8 */
-#define VAL_GPIODODR 0xFFFFFFFF
-
-/*
- * Port E setup.
- * Everything input with pull-up except:
- */
-#define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */
-#define VAL_GPIOECRH 0x88888888 /* PE15...PE8 */
-#define VAL_GPIOEODR 0xFFFFFFFF
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
diff --git a/boards/OLIMEX_STM32_H103/board.mk b/boards/OLIMEX_STM32_H103/board.mk deleted file mode 100644 index 040374ffc..000000000 --- a/boards/OLIMEX_STM32_H103/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files.
-BOARDSRC = ${CHIBIOS}/boards/OLIMEX_STM32_H103/board.c
-
-# Required include directories
-BOARDINC = ${CHIBIOS}/boards/OLIMEX_STM32_H103
diff --git a/boards/OLIMEX_STM32_LCD/board.c b/boards/OLIMEX_STM32_LCD/board.c deleted file mode 100644 index 397ed99b9..000000000 --- a/boards/OLIMEX_STM32_LCD/board.c +++ /dev/null @@ -1,88 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-/**
- * @brief PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- * This variable is used by the HAL when initializing the PAL driver.
- */
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-const PALConfig pal_default_config =
-{
- {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH},
- {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH},
- {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH},
- {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH},
- {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH},
- {VAL_GPIOFODR, VAL_GPIOFCRL, VAL_GPIOFCRH},
- {VAL_GPIOGODR, VAL_GPIOGCRL, VAL_GPIOGCRH},
-};
-#endif
-
-/*
- * Early initialization code.
- * This initialization must be performed just after stack setup and before
- * any other initialization.
- */
-void __early_init(void) {
- stm32_clock_init();
-}
-
-#if HAL_USE_SDC || defined(__DOXYGEN__)
-/**
- * @brief SDC card detection.
- */
-bool_t sdc_lld_is_card_inserted(SDCDriver *sdcp) {
- (void)sdcp;
-
- return TRUE;
-}
-
-/**
- * @brief SDC card write protection detection.
- */
-bool_t sdc_lld_is_write_protected(SDCDriver *sdcp) {
- (void)sdcp;
-
- return FALSE;
-}
-#endif /* HAL_USE_SDC */
-
-#if HAL_USE_MMC_SPI
-/* Board-related functions related to the MMC_SPI driver.*/
-bool_t mmc_lld_is_card_inserted(MMCDriver *mmcp) {
- (void)mmcp;
-
- return TRUE;
-}
-
-bool_t mmc_lld_is_write_protected(MMCDriver *mmcp) {
- (void)mmcp;
-
- return FALSE;
-}
-#endif
-
-/*
- * Board-specific initialization code.
- */
-void boardInit(void) {
-
-}
-
diff --git a/boards/OLIMEX_STM32_LCD/board.h b/boards/OLIMEX_STM32_LCD/board.h deleted file mode 100644 index 0d510abac..000000000 --- a/boards/OLIMEX_STM32_LCD/board.h +++ /dev/null @@ -1,196 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for the Olimex STM32-LCD proto board.
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_OLIMEX_STM32_LCD
-#define BOARD_NAME "Olimex STM32-LCD"
-
-/*
- * Board frequencies.
- */
-#define STM32_LSECLK 32768
-#define STM32_HSECLK 8000000
-
-/*
- * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
- */
-#define STM32F10X_HD
-
-/*
- * IO pins assignments.
- */
-#define GPIOA_SPI1NSS 4
-
-#define GPIOB_SPI2NSS 12
-
-#define GPIOA_USB_P 0
-#define GPIOD_USB_DISC 2
-
-#define GPIOE_TFT_RST 2
-#define GPIOD_TFT_LIGHT 13
-#define GPIOC_TFT_YD 0
-#define GPIOC_TFT_YU 1
-#define GPIOC_TFT_XL 2
-#define GPIOC_TFT_XR 3
-
-/*
- * I/O ports initial setup, this configuration is established soon after reset
- * in the initialization code.
- *
- * The digits have the following meaning:
- * 0 - Analog input.
- * 1 - Push Pull output 10MHz.
- * 2 - Push Pull output 2MHz.
- * 3 - Push Pull output 50MHz.
- * 4 - Digital input.
- * 5 - Open Drain output 10MHz.
- * 6 - Open Drain output 2MHz.
- * 7 - Open Drain output 50MHz.
- * 8 - Digital input with PullUp or PullDown resistor depending on ODR.
- * 9 - Alternate Push Pull output 10MHz.
- * A - Alternate Push Pull output 2MHz.
- * B - Alternate Push Pull output 50MHz.
- * C - Reserved.
- * D - Alternate Open Drain output 10MHz.
- * E - Alternate Open Drain output 2MHz.
- * F - Alternate Open Drain output 50MHz.
- * Please refer to the STM32 Reference Manual for details.
- */
-
-/*
- * Port A setup.
- * Everything input with pull-up except:
- * PA0 - Normal input (USB P).
- * PA2 - Alternate output (USART2 TX).
- * PA3 - Normal input (USART2 RX).
- * PA11 - Normal input (USB DM).
- * PA12 - Normal input (USB DP).
- */
-#define VAL_GPIOACRL 0x88884B84 /* PA7...PA0 */
-#define VAL_GPIOACRH 0x88844888 /* PA15...PA8 */
-#define VAL_GPIOAODR 0xFFFFFFFF
-
-/*
- * Port B setup.
- * Everything input with pull-up except:
- */
-#define VAL_GPIOBCRL 0x88888888 /* PB7...PB0 */
-#define VAL_GPIOBCRH 0x88888888 /* PB15...PB8 */
-#define VAL_GPIOBODR 0xFFFFFFFF
-
-/*
- * Port C setup.
- * Everything input with pull-up except:
- * PC0 - Analog Input (TP_YD).
- * PC1 - Analog Input (TP_YU).
- * PC2 - Analog Input (TP_XL).
- * PC3 - Analog Input (TP_XR).
- * PC8 - Alternate PP 50M (SD_D0).
- * PC9 - Alternate PP 50M (SD_D1).
- * PC10 - Alternate PP 50M (SD_D2).
- * PC11 - Alternate PP 50M (SD_D3).
- * PC12 - Alternate PP 50M (SD_CLK).
- * PC14 - Normal input (XTAL).
- * PC15 - Normal input (XTAL).
- */
-#define VAL_GPIOCCRL 0x88880000 /* PC7...PC0 */
-#define VAL_GPIOCCRH 0x448BBBBB /* PC15...PC8 */
-#define VAL_GPIOCODR 0xFFFFFFFF
-
-/*
- * Port D setup.
- * Everything input with pull-up except:
- * PD2 - Alternate PP 50M (SD_CMD)
- * PD0 - Alternate PP 50M (FSMC_D2)
- * PD1 - Alternate PP 50M (FSMC_D3)
- * PD4 - Alternate PP 50M (TFT_RD)
- * PD5 - Alternate PP 50M (TFT_WR)
- * PD7 - Alternate PP 50M (TFT_CS)
- * PD8 - Alternate PP 50M (FSMC_D13)
- * PD9 - Alternate PP 50M (FSMC_D14)
- * PD10 - Alternate PP 50M (FSMC_D15)
- * PD14 - Alternate PP 50M (FSMC_D0)
- * PD15 - Alternate PP 50M (FSMC_D1)
- */
-#define VAL_GPIODCRL 0xBBBB8BBB /* PD7...PD0 */
-#define VAL_GPIODCRH 0xBB388BBB /* PD15...PD8 */
-#define VAL_GPIODODR 0xFFFFFFFF
-
-/*
- * Port E setup.
- * Everything input with pull-up except:
- * PE2 - Digital Output (TFT_RST)
- * PE3 - Alternate PP 50M (TFT_RS)
- * PE7 - Alternate PP 50M (FSMC_D4)
- * PE8 - Alternate PP 50M (FSMC_D5)
- * PE9 - Alternate PP 50M (FSMC_D6)
- * PE10 - Alternate PP 50M (FSMC_D7)
- * PE11 - Alternate PP 50M (FSMC_D8)
- * PE12 - Alternate PP 50M (FSMC_D9)
- * PE13 - Alternate PP 50M (FSMC_D10)
- * PE14 - Alternate PP 50M (FSMC_D11)
- * PE15 - Alternate PP 50M (FSMC_D12)
- */
-#define VAL_GPIOECRL 0xB888B388 /* PE7...PE0 */
-#define VAL_GPIOECRH 0xBBBBBBBB /* PE15...PE8 */
-#define VAL_GPIOEODR 0xFFFFFFFF
-
-/*
- * Port F setup.
- * Everything input with pull-up expect:
- */
-#define VAL_GPIOFCRL 0x88888888 /* PF7...PF0 */
-#define VAL_GPIOFCRH 0x88888888 /* PF15...PF8 */
-#define VAL_GPIOFODR 0xFFFFFFFF
-
-/*
- * Port G setup.
- * Everything input with pull-up expect:
- */
-#define VAL_GPIOGCRL 0x88888888 /* PG7...PG0 */
-#define VAL_GPIOGCRH 0x88888888 /* PG15...PG8 */
-#define VAL_GPIOGODR 0xFFFFFFFF
-
-/*
- * USB bus activation macro, required by the USB driver.
- */
-#define usb_lld_connect_bus(usbp) palClearPad(GPIOD, GPIOD_USB_DISC)
-
-/*
- * USB bus de-activation macro, required by the USB driver.
- */
-#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOD, GPIOD_USB_DISC)
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
diff --git a/boards/OLIMEX_STM32_LCD/board.mk b/boards/OLIMEX_STM32_LCD/board.mk deleted file mode 100644 index c1cc061de..000000000 --- a/boards/OLIMEX_STM32_LCD/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files.
-BOARDSRC = ${CHIBIOS}/boards/OLIMEX_STM32_LCD/board.c
-
-# Required include directories
-BOARDINC = ${CHIBIOS}/boards/OLIMEX_STM32_LCD
diff --git a/boards/OLIMEX_STM32_P103/board.c b/boards/OLIMEX_STM32_P103/board.c deleted file mode 100644 index ab992f116..000000000 --- a/boards/OLIMEX_STM32_P103/board.c +++ /dev/null @@ -1,65 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-/**
- * @brief PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- * This variable is used by the HAL when initializing the PAL driver.
- */
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-const PALConfig pal_default_config =
-{
- {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH},
- {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH},
- {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH},
- {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH},
- {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH},
-};
-#endif
-
-/*
- * Early initialization code.
- * This initialization must be performed just after stack setup and before
- * any other initialization.
- */
-void __early_init(void) {
-
- stm32_clock_init();
-}
-
-#if HAL_USE_MMC_SPI
-/* Board-related functions related to the MMC_SPI driver.*/
-bool_t mmc_lld_is_card_inserted(MMCDriver *mmcp) {
-
- (void)mmcp;
- return palReadPad(GPIOC, GPIOC_MMCCP);
-}
-
-bool_t mmc_lld_is_write_protected(MMCDriver *mmcp) {
-
- (void)mmcp;
- return !palReadPad(GPIOC, GPIOC_MMCWP);
-}
-#endif
-
-/*
- * Board-specific initialization code.
- */
-void boardInit(void) {
-}
diff --git a/boards/OLIMEX_STM32_P103/board.h b/boards/OLIMEX_STM32_P103/board.h deleted file mode 100644 index 58f020bcc..000000000 --- a/boards/OLIMEX_STM32_P103/board.h +++ /dev/null @@ -1,156 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for the Olimex STM32-P103 proto board.
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_OLIMEX_STM32_P103
-#define BOARD_NAME "Olimex STM32-P103"
-
-/*
- * Board frequencies.
- */
-#define STM32_LSECLK 32768
-#define STM32_HSECLK 8000000
-
-/*
- * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
- */
-#define STM32F10X_MD
-
-/*
- * IO pins assignments.
- */
-#define GPIOA_BUTTON 0
-#define GPIOA_SPI1NSS 4
-
-#define GPIOB_SPI2NSS 12
-
-#define GPIOC_USB_P 4
-#define GPIOC_MMCWP 6
-#define GPIOC_MMCCP 7
-#define GPIOC_CAN_CNTL 10
-#define GPIOC_USB_DISC 11
-#define GPIOC_LED 12
-
-/*
- * I/O ports initial setup, this configuration is established soon after reset
- * in the initialization code.
- *
- * The digits have the following meaning:
- * 0 - Analog input.
- * 1 - Push Pull output 10MHz.
- * 2 - Push Pull output 2MHz.
- * 3 - Push Pull output 50MHz.
- * 4 - Digital input.
- * 5 - Open Drain output 10MHz.
- * 6 - Open Drain output 2MHz.
- * 7 - Open Drain output 50MHz.
- * 8 - Digital input with PullUp or PullDown resistor depending on ODR.
- * 9 - Alternate Push Pull output 10MHz.
- * A - Alternate Push Pull output 2MHz.
- * B - Alternate Push Pull output 50MHz.
- * C - Reserved.
- * D - Alternate Open Drain output 10MHz.
- * E - Alternate Open Drain output 2MHz.
- * F - Alternate Open Drain output 50MHz.
- * Please refer to the STM32 Reference Manual for details.
- */
-
-/*
- * Port A setup.
- * Everything input with pull-up except:
- * PA0 - Normal input (BUTTON).
- * PA2 - Alternate output (USART2 TX).
- * PA3 - Normal input (USART2 RX).
- * PA11 - Normal input (USB DM).
- * PA12 - Normal input (USB DP).
- */
-#define VAL_GPIOACRL 0x88884B84 /* PA7...PA0 */
-#define VAL_GPIOACRH 0x88844888 /* PA15...PA8 */
-#define VAL_GPIOAODR 0xFFFFFFFF
-
-/*
- * Port B setup.
- * Everything input with pull-up except:
- * PB13 - Alternate output (MMC SPI2 SCK).
- * PB14 - Normal input (MMC SPI2 MISO).
- * PB15 - Alternate output (MMC SPI2 MOSI).
- */
-#define VAL_GPIOBCRL 0x88888888 /* PB7...PB0 */
-#define VAL_GPIOBCRH 0xB4B88888 /* PB15...PB8 */
-#define VAL_GPIOBODR 0xFFFFFFFF
-
-/*
- * Port C setup.
- * Everything input with pull-up except:
- * PC4 - Normal input because there is an external resistor.
- * PC6 - Normal input because there is an external resistor.
- * PC7 - Normal input because there is an external resistor.
- * PC10 - Push Pull output (CAN CNTRL).
- * PC11 - Push Pull output (USB DISC).
- * PC12 - Push Pull output (LED).
- */
-#define VAL_GPIOCCRL 0x44848888 /* PC7...PC0 */
-#define VAL_GPIOCCRH 0x88833388 /* PC15...PC8 */
-#define VAL_GPIOCODR 0xFFFFFFFF
-
-/*
- * Port D setup.
- * Everything input with pull-up except:
- * PD0 - Normal input (XTAL).
- * PD1 - Normal input (XTAL).
- */
-#define VAL_GPIODCRL 0x88888844 /* PD7...PD0 */
-#define VAL_GPIODCRH 0x88888888 /* PD15...PD8 */
-#define VAL_GPIODODR 0xFFFFFFFF
-
-/*
- * Port E setup.
- * Everything input with pull-up except:
- */
-#define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */
-#define VAL_GPIOECRH 0x88888888 /* PE15...PE8 */
-#define VAL_GPIOEODR 0xFFFFFFFF
-
-/*
- * USB bus activation macro, required by the USB driver.
- */
-#define usb_lld_connect_bus(usbp) palClearPad(GPIOC, GPIOC_USB_DISC)
-
-/*
- * USB bus de-activation macro, required by the USB driver.
- */
-#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOC, GPIOC_USB_DISC)
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
diff --git a/boards/OLIMEX_STM32_P103/board.mk b/boards/OLIMEX_STM32_P103/board.mk deleted file mode 100644 index 701970e84..000000000 --- a/boards/OLIMEX_STM32_P103/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files.
-BOARDSRC = ${CHIBIOS}/boards/OLIMEX_STM32_P103/board.c
-
-# Required include directories
-BOARDINC = ${CHIBIOS}/boards/OLIMEX_STM32_P103
diff --git a/boards/OLIMEX_STM32_P107/board.c b/boards/OLIMEX_STM32_P107/board.c deleted file mode 100644 index 586c27c13..000000000 --- a/boards/OLIMEX_STM32_P107/board.c +++ /dev/null @@ -1,84 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-/**
- * @brief PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- * This variable is used by the HAL when initializing the PAL driver.
- */
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-const PALConfig pal_default_config =
-{
- {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH},
- {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH},
- {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH},
- {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH},
- {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH},
-};
-#endif
-
-/*
- * Early initialization code.
- * This initialization must be performed just after stack setup and before
- * any other initialization.
- */
-void __early_init(void) {
-
- stm32_clock_init();
-}
-
-#if HAL_USE_MMC_SPI
-/*
- * Card detection through the card internal pull-up on D3.
- */
-bool_t mmc_lld_is_card_inserted(MMCDriver *mmcp) {
- static bool_t last_status = FALSE;
-
- (void)mmcp;
- if ((palReadLatch(GPIOA) & PAL_PORT_BIT(GPIOA_SPI3_CS_MMC)) == 0)
- return last_status;
- return last_status = (bool_t)palReadPad(GPIOA, GPIOA_SPI3_CS_MMC);
-}
-
-/*
- * Card write protection detection is not possible, the card is always
- * reported as not protected.
- */
-bool_t mmc_lld_is_write_protected(MMCDriver *mmcp) {
-
- (void)mmcp;
- return FALSE;
-}
-#endif
-
-/*
- * Board-specific initialization code.
- */
-void boardInit(void) {
-
- /*
- * Several I/O pins are re-mapped:
- * USART3 to the PD8/PD9 pins.
- * I2C1 to the PB8/PB9 pins.
- * SPI3 to the PC10/PC11/PC12 pins.
- */
- AFIO->MAPR |= AFIO_MAPR_USART3_REMAP_FULLREMAP |
- AFIO_MAPR_I2C1_REMAP |
- AFIO_MAPR_SPI3_REMAP;
-}
diff --git a/boards/OLIMEX_STM32_P107/board.h b/boards/OLIMEX_STM32_P107/board.h deleted file mode 100644 index 8bf523d33..000000000 --- a/boards/OLIMEX_STM32_P107/board.h +++ /dev/null @@ -1,193 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for the Olimex STM32-P107 Rev.A evaluation board.
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_OLIMEX_STM32_P107_REV_A
-#define BOARD_NAME "Olimex STM32-P107 Rev.A"
-
-/*
- * Board frequencies.
- */
-#define STM32_LSECLK 32768
-#define STM32_HSECLK 25000000
-
-/*
- * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
- */
-#define STM32F10X_CL
-
-/*
- * Ethernet PHY type.
- */
-#define BOARD_PHY_ID MII_STE101P_ID
-#define BOARD_PHY_RMII
-
-/*
- * IO pins assignments.
- */
-#define GPIOA_SWITCH_WKUP 0
-#define GPIOA_SPI3_CS_MMC 4
-#define GPIOC_LED_STATUS1 6
-#define GPIOC_LED_STATUS2 7
-#define GPIOC_SWITCH_TAMPER 13
-
-/*
- * I/O ports initial setup, this configuration is established soon after reset
- * in the initialization code.
- *
- * The digits have the following meaning:
- * 0 - Analog input.
- * 1 - Push Pull output 10MHz.
- * 2 - Push Pull output 2MHz.
- * 3 - Push Pull output 50MHz.
- * 4 - Digital input.
- * 5 - Open Drain output 10MHz.
- * 6 - Open Drain output 2MHz.
- * 7 - Open Drain output 50MHz.
- * 8 - Digital input with PullUp or PullDown resistor depending on ODR.
- * 9 - Alternate Push Pull output 10MHz.
- * A - Alternate Push Pull output 2MHz.
- * B - Alternate Push Pull output 50MHz.
- * C - Reserved.
- * D - Alternate Open Drain output 10MHz.
- * E - Alternate Open Drain output 2MHz.
- * F - Alternate Open Drain output 50MHz.
- * Please refer to the STM32 Reference Manual for details.
- */
-
-/*
- * Port A setup.
- * Everything input with pull-up except:
- * PA0 - Normal input (WKUP BUTTON).
- * PA1 - Normal input (ETH_RMII_REF_CLK).
- * PA2 - Alternate output (ETH_RMII_MDIO).
- * PA3 - Input with PU (unconnected).
- * PA4 - Open Drain output (CS_MMC).
- * PA5 - Input with PU (unconnected).
- * PA6 - Input with PU (unconnected).
- * PA7 - Normal input (ETH_RMII_CRS_DV).
- * PA8 - Alternate output (MCO).
- * PA9 - Normal input (OTG_VBUS).
- * PA10 - Normal input (OTG_ID).
- * PA11 - Normal input (OTG_DM).
- * PA12 - Normal input (OTG_DP).
- * PA13 - Normal input (TMS).
- * PA14 - Normal input (TCK).
- * PA15 - Normal input (TDI).
- */
-#define VAL_GPIOACRL 0x48878B44 /* PA7...PA0 */
-#define VAL_GPIOACRH 0x4444444B /* PA15...PA8 */
-#define VAL_GPIOAODR 0xFFFFFFFF
-
-/*
- * Port B setup:
- * PB0 - Input with PU (unconnected).
- * PB1 - Input with PU (unconnected).
- * PB2 - Normal input (BOOT1).
- * PB3 - Normal input (TDO).
- * PB4 - Normal input (TRST).
- * PB5 - Input with PU (unconnected).
- * PB6 - Input with PU (unconnected).
- * PB7 - Input with PU (unconnected).
- * PB8 - Alternate O.D. (I2C1 SCL, remapped).
- * PB9 - Alternate O.D. (I2C1 SDA, remapped).
- * PB10 - Input with PU (unconnected).
- * PB11 - Alternate output (ETH_RMII_TX_EN).
- * PB12 - Alternate output (ETH_RMII_TXD0).
- * PB13 - Alternate output (ETH_RMII_TXD1).
- * PB14 - Input with PU (unconnected).
- * PB15 - Push Pull output (CS_UEXT).
- */
-#define VAL_GPIOBCRL 0x88844488 /* PB7...PB0 */
-#define VAL_GPIOBCRH 0x38BBB8FF /* PB15...PB8 */
-#define VAL_GPIOBODR 0xFFFFFFFF
-
-/*
- * Port C setup:
- * PC0 - Input with PU (unconnected).
- * PC1 - Alternate output (ETH_MDC).
- * PC2 - Input with PU (unconnected).
- * PC3 - Input with PU (unconnected).
- * PC4 - Normal input (ETH_RMII_RXD0).
- * PC5 - Normal input (ETH_RMII_RXD1).
- * PC6 - Push Pull output (STAT1 green LED).
- * PC7 - Push Pull output (STAT2 yellow LED).
- * PC8 - Input with PU (unconnected).
- * PC9 - Input with PU (unconnected).
- * PC10 - Alternate output (SPI3 SCK).
- * PC11 - Input with PU (SPI3 MISO).
- * PC12 - Alternate output (SPI3 MOSI).
- * PC13 - Normal input (TAMPER).
- * PC14 - Normal input (OSC32 IN).
- * PC15 - Normal input (OSC32 OUT).
- */
-#define VAL_GPIOCCRL 0x334488B8 /* PC7...PC0 */
-#define VAL_GPIOCCRH 0x444B8B88 /* PC15...PC8 */
-#define VAL_GPIOCODR 0xFFFFFF3F
-
-/*
- * Port D setup:
- * PD0 - Input with PU (unconnected).
- * PD1 - Input with PU (unconnected).
- * PD2 - Input with PU (unconnected).
- * PD3 - Input with PU (unconnected).
- * PD4 - Input with PU (unconnected).
- * PD5 - Alternate output (USART2 TX, UEXT).
- * PD6 - Input with PU (USART2 RX, UEXT).
- * PD7 - Push Pull output (USB_VBUSON).
- * PD8 - Alternate output (USART2 TX, remapped).
- * PD9 - Normal input (USART2 RX, remapped).
- * PD10 - Input with PU (unconnected).
- * PD11 - Normal input (USART2 CTS, remapped).
- * PD12 - Alternate output (USART2 RTS, remapped).
- * PD13 - Input with PU (unconnected).
- * PD14 - Input with PU (unconnected).
- * PD15 - Input with PU (unconnected).
- */
-#define VAL_GPIODCRL 0x38B88888 /* PD7...PD0 */
-#define VAL_GPIODCRH 0x888B484B /* PD15...PD8 */
-#define VAL_GPIODODR 0xFFFFFFFF
-
-/*
- * Port E setup.
- * Everything input with pull-up except:
- * PE14 - Normal input (ETH_RMII_MDINT).
- * PE15 - Normal input (USB_FAULT).
- */
-#define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */
-#define VAL_GPIOECRH 0x44888888 /* PE15...PE8 */
-#define VAL_GPIOEODR 0xFFFFFFFF
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
diff --git a/boards/OLIMEX_STM32_P107/board.mk b/boards/OLIMEX_STM32_P107/board.mk deleted file mode 100644 index 63f70119a..000000000 --- a/boards/OLIMEX_STM32_P107/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files.
-BOARDSRC = ${CHIBIOS}/boards/OLIMEX_STM32_P107/board.c
-
-# Required include directories
-BOARDINC = ${CHIBIOS}/boards/OLIMEX_STM32_P107
diff --git a/boards/OLIMEX_STM32_P407/board.c b/boards/OLIMEX_STM32_P407/board.c deleted file mode 100644 index 17ef1d54f..000000000 --- a/boards/OLIMEX_STM32_P407/board.c +++ /dev/null @@ -1,78 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-/**
- * @brief PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- * This variable is used by the HAL when initializing the PAL driver.
- */
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-const PALConfig pal_default_config =
-{
- {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH},
- {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR, VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH},
- {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR, VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH},
- {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR, VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH},
- {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR, VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH},
- {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR, VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH},
- {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR, VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH},
- {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR, VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH},
- {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH}
-};
-#endif
-
-/*
- * Early initialization code.
- * This initialization must be performed just after stack setup and before
- * any other initialization.
- */
-void __early_init(void) {
-
- stm32_clock_init();
-}
-
-#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
-/**
- * @brief MMC_SPI card detection.
- */
-bool_t mmc_lld_is_card_inserted(MMCDriver *mmcp) {
- static bool_t last_status = FALSE;
- (void)mmcp;
-
- if ((palReadLatch(GPIOD) & PAL_PORT_BIT(GPIOD_SPI3_CS)) == 0)
- return last_status;
- return last_status = (bool_t)palReadPad(GPIOD, GPIOD_SPI3_CS);
-}
-
-/**
- * @brief MMC_SPI card write protection detection.
- */
-bool_t mmc_lld_is_write_protected(MMCDriver *mmcp) {
-
- (void)mmcp;
- /* TODO: Fill the implementation.*/
- return FALSE;
-}
-#endif
-
-/*
- * Board-specific initialization code.
- */
-void boardInit(void) {
-}
diff --git a/boards/OLIMEX_STM32_P407/board.h b/boards/OLIMEX_STM32_P407/board.h deleted file mode 100644 index 66279a8f9..000000000 --- a/boards/OLIMEX_STM32_P407/board.h +++ /dev/null @@ -1,651 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for Olimex STM32-P407 board.
- * NOTE: Part of JTAG signals are used for other functions, this board can be
- * used using SWD only.
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_OLIMEX_STM32_P407
-#define BOARD_NAME "Olimex STM32-P407"
-
-/*
- * Ethernet PHY type.
- */
-#define BOARD_PHY_ID MII_KS8721_ID
-#define BOARD_PHY_RMII
-
-/*
- * Board frequencies.
- * NOTE: The LSE crystal is not fitted by default on the board.
- */
-#define STM32_LSECLK 32768
-#define STM32_HSECLK 25000000
-
-/*
- * Board voltages.
- * Required for performance limits calculation.
- */
-#define STM32_VDD 330
-
-/*
- * MCU type as defined in the ST header file stm32f4xx.h.
- */
-#define STM32F4XX
-
-/*
- * IO pins assignments.
- */
-#define GPIOA_BUTTON_WKUP 0
-#define GPIOA_ETH_RMII_REF_CLK 1
-#define GPIOA_ETH_RMII_MDIO 2
-#define GPIOA_ETH_RMII_MDINT 3
-#define GPIOA_DCMI_HSYNC 4
-#define GPIOA_LCD_SCK 5
-#define GPIOA_DCMI_PIXCLK 6
-#define GPIOA_ETH_RMII_CRS_DV 7
-#define GPIOA_MCO1 8
-#define GPIOA_OTG_FS_VBUS 9
-#define GPIOA_DCMI_D1 10
-#define GPIOA_OTG_FS_DM 11
-#define GPIOA_OTG_FS_DP 12
-#define GPIOA_SWDIO 13
-#define GPIOA_SWCLK 14
-#define GPIOA_I2S3_WS 15
-
-#define GPIOB_LCD_BL 0
-#define GPIOB_BUZ 1
-#define GPIOB_CAM_ENB 2
-#define GPIOB_I2S3_CK 3
-#define GPIOB_LCD_MISO 4
-#define GPIOB_I2S3_SD 5
-#define GPIOB_DCMI_D5 6
-#define GPIOB_DCMI_VSYNC 7
-#define GPIOB_CAN1_RX 8
-#define GPIOB_CAN1_TX 9
-#define GPIOB_USB_FS_FAULT 10
-#define GPIOB_ETH_RMII_TX_EN 11
-#define GPIOB_OTG_HS_ID 12
-#define GPIOB_OTG_HS_VBUS 13
-#define GPIOB_OTG_HS_DM 14
-#define GPIOB_OTG_HS_DP 15
-
-#define GPIOC_TRIM 0
-#define GPIOC_ETH_RMII_MDC 1
-#define GPIOC_USB_FS_VBUSON 2
-#define GPIOC_LCD_MOSI 3
-#define GPIOC_ETH_RMII_RXD0 4
-#define GPIOC_ETH_RMII_RXD1 5
-#define GPIOC_DCMI_D0_US6_TX 6
-#define GPIOC_I2S3_MCK 7
-#define GPIOC_DCMI_D2 8
-#define GPIOC_DCMI_D3 9
-#define GPIOC_SPI3_SCK 10
-#define GPIOC_SPI3_MISO 11
-#define GPIOC_SPI3_MOSI 12
-#define GPIOC_SWITCH_TAMPER 13
-#define GPIOC_OSC32_IN 14
-#define GPIOC_OSC32_OUT 15
-
-#define GPIOD_USELESS0 0
-#define GPIOD_USELESS1 1
-#define GPIOD_SPI3_CS 2
-#define GPIOD_LCD_RST 3
-#define GPIOD_USELESS4 4
-#define GPIOD_USELESS5 5
-#define GPIOD_LCD_CS 6
-#define GPIOD_USELESS7 7
-#define GPIOD_USART3_TX 8
-#define GPIOD_USART3_RX 9
-#define GPIOD_USELESS10 10
-#define GPIOD_USART3_CTS 11
-#define GPIOD_USART3_RTS 12
-#define GPIOD_USB_HS_FAULT 13
-#define GPIOD_USELESS14 14
-#define GPIOD_USELESS15 15
-
-#define GPIOE_0 0
-#define GPIOE_1 1
-#define GPIOE_TEMP_ALERT 2
-#define GPIOE_USB_HS_VBUSON 3
-#define GPIOE_4 4
-#define GPIOE_5 5
-#define GPIOE_6 6
-#define GPIOE_7 7
-#define GPIOE_8 8
-#define GPIOE_9 9
-#define GPIOE_10 10
-#define GPIOE_11 11
-#define GPIOE_12 12
-#define GPIOE_13 13
-#define GPIOE_14 14
-#define GPIOE_15 15
-
-#define GPIOF_0 0
-#define GPIOF_1 1
-#define GPIOF_2 2
-#define GPIOF_3 3
-#define GPIOF_4 4
-#define GPIOF_5 5
-#define GPIOF_STAT1 6
-#define GPIOF_STAT2 7
-#define GPIOF_STAT3 8
-#define GPIOF_CAM_PWR 9
-#define GPIOF_10 10
-#define GPIOF_CAM_RS 11
-#define GPIOF_12 12
-#define GPIOF_13 13
-#define GPIOF_14 14
-#define GPIOF_15 15
-
-#define GPIOG_0 0
-#define GPIOG_1 1
-#define GPIOG_2 2
-#define GPIOG_3 3
-#define GPIOG_4 4
-#define GPIOG_5 5
-#define GPIOG_RIGHT 6
-#define GPIOG_UP 7
-#define GPIOG_DOWN 8
-#define GPIOG_USART6_RX 9
-#define GPIOG_10 10
-#define GPIOG_LEFT 11
-#define GPIOG_12 12
-#define GPIOG_ETH_RMII_TXD0 13
-#define GPIOG_ETH_RMII_TXD1 14
-#define GPIOG_CENT 15
-
-#define GPIOH_OSC_IN 0
-#define GPIOH_OSC_OUT 1
-
-/*
- * I/O ports initial setup, this configuration is established soon after reset
- * in the initialization code.
- * Please refer to the STM32 Reference Manual for details.
- */
-#define PIN_MODE_INPUT(n) (0U << ((n) * 2))
-#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2))
-#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2))
-#define PIN_MODE_ANALOG(n) (3U << ((n) * 2))
-#define PIN_OTYPE_PUSHPULL(n) (0U << (n))
-#define PIN_OTYPE_OPENDRAIN(n) (1U << (n))
-#define PIN_OSPEED_2M(n) (0U << ((n) * 2))
-#define PIN_OSPEED_25M(n) (1U << ((n) * 2))
-#define PIN_OSPEED_50M(n) (2U << ((n) * 2))
-#define PIN_OSPEED_100M(n) (3U << ((n) * 2))
-#define PIN_PUDR_FLOATING(n) (0U << ((n) * 2))
-#define PIN_PUDR_PULLUP(n) (1U << ((n) * 2))
-#define PIN_PUDR_PULLDOWN(n) (2U << ((n) * 2))
-#define PIN_AFIO_AF(n, v) ((v##U) << ((n % 8) * 4))
-
-/*
- * Port A setup.
- *
- * PA0 - GPIOA_BUTTON_WKUP (input floating).
- * PA1 - GPIOA_ETH_RMII_REF_CLK(alternate 11).
- * PA2 - GPIOA_ETH_RMII_MDIO (alternate 11).
- * PA3 - GPIOA_ETH_RMII_MDINT (input floating).
- * PA4 - GPIOA_DCMI_HSYNC (input pull-up).
- * PA5 - GPIOA_LCD_SCK (output push-pull).
- * PA6 - GPIOA_DCMI_PIXCLK (input pull-up).
- * PA7 - GPIOA_ETH_RMII_CRS_DV (alternate 11).
- * PA8 - GPIOA_MCO1 (alternate 0).
- * PA9 - GPIOA_OTG_FS_VBUS (input pull-up).
- * PA10 - GPIOA_DCMI_D1 (input pull-up).
- * PA11 - GPIOA_OTG_FS_DM (alternate 10).
- * PA12 - GPIOA_OTG_FS_DP (alternate 10).
- * PA13 - GPIOA_SWDIO (alternate 0).
- * PA14 - GPIOA_SWCLK (alternate 0, pull-down).
- * PA15 - GPIOA_I2S3_WS (alternate 6).
- */
-#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_BUTTON_WKUP) | \
- PIN_MODE_ALTERNATE(GPIOA_ETH_RMII_REF_CLK) | \
- PIN_MODE_ALTERNATE(GPIOA_ETH_RMII_MDIO) | \
- PIN_MODE_INPUT(GPIOA_ETH_RMII_MDINT) | \
- PIN_MODE_INPUT(GPIOA_DCMI_HSYNC) | \
- PIN_MODE_OUTPUT(GPIOA_LCD_SCK) | \
- PIN_MODE_INPUT(GPIOA_DCMI_PIXCLK) | \
- PIN_MODE_ALTERNATE(GPIOA_ETH_RMII_CRS_DV) | \
- PIN_MODE_ALTERNATE(GPIOA_MCO1) | \
- PIN_MODE_INPUT(GPIOA_OTG_FS_VBUS) | \
- PIN_MODE_INPUT(GPIOA_DCMI_D1) | \
- PIN_MODE_ALTERNATE(GPIOA_OTG_FS_DM) | \
- PIN_MODE_ALTERNATE(GPIOA_OTG_FS_DP) | \
- PIN_MODE_ALTERNATE(GPIOA_SWDIO) | \
- PIN_MODE_ALTERNATE(GPIOA_SWCLK) | \
- PIN_MODE_ALTERNATE(GPIOA_I2S3_WS))
-#define VAL_GPIOA_OTYPER 0x00000000
-#define VAL_GPIOA_OSPEEDR 0xFFFFFFFF
-#define VAL_GPIOA_PUPDR (PIN_PUDR_PULLUP(GPIOA_DCMI_HSYNC) | \
- PIN_PUDR_PULLUP(GPIOA_DCMI_PIXCLK) | \
- PIN_PUDR_PULLDOWN(GPIOA_OTG_FS_VBUS) | \
- PIN_PUDR_PULLUP(GPIOA_DCMI_D1) | \
- PIN_PUDR_PULLDOWN(GPIOA_SWCLK))
-#define VAL_GPIOA_ODR 0xFFFFFFDF
-#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_ETH_RMII_REF_CLK, 11) | \
- PIN_AFIO_AF(GPIOA_ETH_RMII_MDIO, 11) | \
- PIN_AFIO_AF(GPIOA_ETH_RMII_CRS_DV, 11))
-#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_MCO1, 0) | \
- PIN_AFIO_AF(GPIOA_OTG_FS_DM, 10) | \
- PIN_AFIO_AF(GPIOA_OTG_FS_DP, 10) | \
- PIN_AFIO_AF(GPIOA_SWDIO, 0) | \
- PIN_AFIO_AF(GPIOA_SWCLK, 0) | \
- PIN_AFIO_AF(GPIOA_I2S3_WS, 6))
-
-/*
- * Port B setup.
- *
- * PB0 - GPIOB_LCD_BL (output push-pull).
- * PB1 - GPIOB_BUZ (output push-pull).
- * PB2 - GPIOB_CAM_ENB (input floating).
- * PB3 - GPIOB_I2S3_CK (alternate 6).
- * PB4 - GPIOB_LCD_MISO (input floating).
- * PB5 - GPIOB_I2S3_SD (alternate 6).
- * PB6 - GPIOB_DCMI_D5 (input pull-up).
- * PB7 - GPIOB_DCMI_VSYNC (input pull-up).
- * PB8 - GPIOB_CAN1_RX (alternate 9).
- * PB9 - GPIOB_CAN1_TX (alternate 9).
- * PB10 - GPIOB_USB_FS_FAULT (input floating).
- * PB11 - GPIOB_ETH_RMII_TX_EN (alternate 11).
- * PB12 - GPIOB_OTG_HS_ID (alternate 12).
- * PB13 - GPIOB_OTG_HS_VBUS (input pull-up).
- * PB14 - GPIOB_OTG_HS_DM (alternate 12).
- * PB15 - GPIOB_OTG_HS_DP (alternate 12).
- */
-#define VAL_GPIOB_MODER (PIN_MODE_OUTPUT(GPIOB_LCD_BL) | \
- PIN_MODE_OUTPUT(GPIOB_BUZ) | \
- PIN_MODE_INPUT(GPIOB_CAM_ENB) | \
- PIN_MODE_ALTERNATE(GPIOB_I2S3_CK) | \
- PIN_MODE_INPUT(GPIOB_LCD_MISO) | \
- PIN_MODE_ALTERNATE(GPIOB_I2S3_SD) | \
- PIN_MODE_INPUT(GPIOB_DCMI_D5) | \
- PIN_MODE_INPUT(GPIOB_DCMI_VSYNC) | \
- PIN_MODE_ALTERNATE(GPIOB_CAN1_RX) | \
- PIN_MODE_ALTERNATE(GPIOB_CAN1_TX) | \
- PIN_MODE_INPUT(GPIOB_USB_FS_FAULT) | \
- PIN_MODE_ALTERNATE(GPIOB_ETH_RMII_TX_EN) | \
- PIN_MODE_ALTERNATE(GPIOB_OTG_HS_ID) | \
- PIN_MODE_INPUT(GPIOB_OTG_HS_VBUS) | \
- PIN_MODE_ALTERNATE(GPIOB_OTG_HS_DM) | \
- PIN_MODE_ALTERNATE(GPIOB_OTG_HS_DP))
-#define VAL_GPIOB_OTYPER 0x00000000
-#define VAL_GPIOB_OSPEEDR 0xFFFFFFFF
-#define VAL_GPIOB_PUPDR (PIN_PUDR_PULLUP(GPIOB_DCMI_D5) | \
- PIN_PUDR_PULLUP(GPIOB_DCMI_VSYNC) | \
- PIN_PUDR_PULLDOWN(GPIOB_OTG_HS_VBUS))
-#define VAL_GPIOB_ODR 0xFFFFFFFC
-#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_I2S3_CK, 6) | \
- PIN_AFIO_AF(GPIOB_I2S3_SD, 6))
-#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_CAN1_RX, 9) | \
- PIN_AFIO_AF(GPIOB_CAN1_TX, 9) | \
- PIN_AFIO_AF(GPIOB_ETH_RMII_TX_EN, 11) | \
- PIN_AFIO_AF(GPIOB_OTG_HS_ID, 12) | \
- PIN_AFIO_AF(GPIOB_OTG_HS_DM, 12) | \
- PIN_AFIO_AF(GPIOB_OTG_HS_DP, 12))
-
-/*
- * Port C setup.
- *
- * PC0 - GPIOC_TRIM (input floating).
- * PC1 - GPIOC_ETH_RMII_MDC (alternate 11).
- * PC2 - GPIOC_USB_FS_VBUSON (output push-pull).
- * PC3 - GPIOC_LCD_MOSI (output push-pull).
- * PC4 - GPIOC_ETH_RMII_RXD0 (alternate 11).
- * PC5 - GPIOC_ETH_RMII_RXD1 (alternate 11).
- * PC6 - GPIOC_DCMI_D0_US6_TX (alternate 8).
- * PC7 - GPIOC_I2S3_MCK (alternate 6).
- * PC8 - GPIOC_DCMI_D2 (input pull-up).
- * PC9 - GPIOC_DCMI_D3 (input pull-up).
- * PC10 - GPIOC_SPI3_SCK (alternate 6).
- * PC11 - GPIOC_SPI3_MISO (alternate 6).
- * PC12 - GPIOC_SPI3_MOSI (alternate 6).
- * PC13 - GPIOC_SWITCH_TAMPER (input floating).
- * PC14 - GPIOC_OSC32_IN (input floating).
- * PC15 - GPIOC_OSC32_OUT (input floating).
- */
-#define VAL_GPIOC_MODER (PIN_MODE_INPUT(GPIOC_TRIM) | \
- PIN_MODE_ALTERNATE(GPIOC_ETH_RMII_MDC) | \
- PIN_MODE_OUTPUT(GPIOC_USB_FS_VBUSON) | \
- PIN_MODE_OUTPUT(GPIOC_LCD_MOSI) | \
- PIN_MODE_ALTERNATE(GPIOC_ETH_RMII_RXD0) | \
- PIN_MODE_ALTERNATE(GPIOC_ETH_RMII_RXD1) | \
- PIN_MODE_ALTERNATE(GPIOC_DCMI_D0_US6_TX) | \
- PIN_MODE_ALTERNATE(GPIOC_I2S3_MCK) | \
- PIN_MODE_INPUT(GPIOC_DCMI_D2) | \
- PIN_MODE_INPUT(GPIOC_DCMI_D3) | \
- PIN_MODE_ALTERNATE(GPIOC_SPI3_SCK) | \
- PIN_MODE_ALTERNATE(GPIOC_SPI3_MISO) | \
- PIN_MODE_ALTERNATE(GPIOC_SPI3_MOSI) | \
- PIN_MODE_INPUT(GPIOC_SWITCH_TAMPER) | \
- PIN_MODE_INPUT(GPIOC_OSC32_IN) | \
- PIN_MODE_INPUT(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_OTYPER 0x00000000
-#define VAL_GPIOC_OSPEEDR 0xFFFFFFFF
-#define VAL_GPIOC_PUPDR (PIN_PUDR_PULLUP(GPIOC_DCMI_D2) | \
- PIN_PUDR_PULLUP(GPIOC_DCMI_D3))
-#define VAL_GPIOC_ODR 0xFFFFFFF3
-#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_ETH_RMII_MDC, 11) | \
- PIN_AFIO_AF(GPIOC_ETH_RMII_RXD0, 11) | \
- PIN_AFIO_AF(GPIOC_ETH_RMII_RXD1, 11) | \
- PIN_AFIO_AF(GPIOC_DCMI_D0_US6_TX, 8) | \
- PIN_AFIO_AF(GPIOC_I2S3_MCK, 6))
-#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_SPI3_SCK, 6) | \
- PIN_AFIO_AF(GPIOC_SPI3_MISO, 6) | \
- PIN_AFIO_AF(GPIOC_SPI3_MOSI, 6))
-
-/*
- * Port D setup.
- *
- * PD0 - GPIOD_USELESS0 (input pull-up).
- * PD1 - GPIOD_USELESS1 (input pull-up).
- * PD2 - GPIOD_SPI3_CS (output opendrain).
- * PD3 - GPIOD_LCD_RST (output push-pull).
- * PD4 - GPIOD_USELESS4 (input pull-up).
- * PD5 - GPIOD_USELESS5 (input pull-up).
- * PD6 - GPIOD_LCD_CS (output push-pull).
- * PD7 - GPIOD_USELESS7 (input pull-up).
- * PD8 - GPIOD_USART3_TX (alternate 8).
- * PD9 - GPIOD_USART3_RX (alternate 8).
- * PD10 - GPIOD_USELESS10 (input pull-up).
- * PD11 - GPIOD_USART3_CTS (alternate 8).
- * PD12 - GPIOD_USART3_RTS (alternate 8).
- * PD13 - GPIOD_USB_HS_FAULT (input floating).
- * PD14 - GPIOD_USELESS14 (input pull-up).
- * PD15 - GPIOD_USELESS15 (input pull-up).
- */
-#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_USELESS0) | \
- PIN_MODE_INPUT(GPIOD_USELESS1) | \
- PIN_MODE_OUTPUT(GPIOD_SPI3_CS) | \
- PIN_MODE_OUTPUT(GPIOD_LCD_RST) | \
- PIN_MODE_INPUT(GPIOD_USELESS4) | \
- PIN_MODE_INPUT(GPIOD_USELESS5) | \
- PIN_MODE_OUTPUT(GPIOD_LCD_CS) | \
- PIN_MODE_INPUT(GPIOD_USELESS7) | \
- PIN_MODE_ALTERNATE(GPIOD_USART3_TX) | \
- PIN_MODE_ALTERNATE(GPIOD_USART3_RX) | \
- PIN_MODE_INPUT(GPIOD_USELESS10) | \
- PIN_MODE_ALTERNATE(GPIOD_USART3_CTS) | \
- PIN_MODE_ALTERNATE(GPIOD_USART3_RTS) | \
- PIN_MODE_INPUT(GPIOD_USB_HS_FAULT) | \
- PIN_MODE_INPUT(GPIOD_USELESS14) | \
- PIN_MODE_INPUT(GPIOD_USELESS15))
-#define VAL_GPIOD_OTYPER PIN_OTYPE_OPENDRAIN(GPIOD_SPI3_CS)
-#define VAL_GPIOD_OSPEEDR 0xFFFFFFFF
-#define VAL_GPIOD_PUPDR (PIN_PUDR_PULLUP(GPIOD_USELESS0) | \
- PIN_PUDR_PULLUP(GPIOD_USELESS1) | \
- PIN_PUDR_PULLUP(GPIOD_USELESS4) | \
- PIN_PUDR_PULLUP(GPIOD_USELESS5) | \
- PIN_PUDR_PULLUP(GPIOD_USELESS7) | \
- PIN_PUDR_PULLUP(GPIOD_USELESS10) | \
- PIN_PUDR_PULLUP(GPIOD_USELESS14) | \
- PIN_PUDR_PULLUP(GPIOD_USELESS15))
-#define VAL_GPIOD_ODR 0xFFFFFFFF
-#define VAL_GPIOD_AFRL 0x00000000
-#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_USART3_TX, 7) | \
- PIN_AFIO_AF(GPIOD_USART3_RX, 7) | \
- PIN_AFIO_AF(GPIOD_USART3_CTS, 7) | \
- PIN_AFIO_AF(GPIOD_USART3_RTS, 7))
-
-/*
- * Port E setup.
- *
- * PE0 - GPIOE_0 (input pull-up).
- * PE1 - GPIOE_1 (input pull-up).
- * PE2 - GPIOE_TEMP_ALERT (input floating).
- * PE3 - GPIOE_USB_HS_VBUSON (output push-pull).
- * PE4 - GPIOE_4 (input pull-up).
- * PE5 - GPIOE_5 (input pull-up).
- * PE6 - GPIOE_6 (input pull-up).
- * PE7 - GPIOE_7 (input pull-up).
- * PE8 - GPIOE_8 (input pull-up).
- * PE9 - GPIOE_9 (input pull-up).
- * PE10 - GPIOE_10 (input pull-up).
- * PE11 - GPIOE_11 (input pull-up).
- * PE12 - GPIOE_12 (input pull-up).
- * PE13 - GPIOE_13 (input pull-up).
- * PE14 - GPIOE_14 (input pull-up).
- * PE15 - GPIOE_15 (input pull-up).
- */
-#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_0) | \
- PIN_MODE_INPUT(GPIOE_1) | \
- PIN_MODE_INPUT(GPIOE_TEMP_ALERT) | \
- PIN_MODE_OUTPUT(GPIOE_USB_HS_VBUSON) | \
- PIN_MODE_INPUT(GPIOE_4) | \
- PIN_MODE_INPUT(GPIOE_5) | \
- PIN_MODE_INPUT(GPIOE_6) | \
- PIN_MODE_INPUT(GPIOE_7) | \
- PIN_MODE_INPUT(GPIOE_8) | \
- PIN_MODE_INPUT(GPIOE_9) | \
- PIN_MODE_INPUT(GPIOE_10) | \
- PIN_MODE_INPUT(GPIOE_11) | \
- PIN_MODE_INPUT(GPIOE_12) | \
- PIN_MODE_INPUT(GPIOE_13) | \
- PIN_MODE_INPUT(GPIOE_14) | \
- PIN_MODE_INPUT(GPIOE_15))
-#define VAL_GPIOE_OTYPER 0x00000000
-#define VAL_GPIOE_OSPEEDR 0xFFFFFFFF
-#define VAL_GPIOE_PUPDR (PIN_PUDR_PULLUP(GPIOE_0) | \
- PIN_PUDR_PULLUP(GPIOE_1) | \
- PIN_PUDR_PULLUP(GPIOE_4) | \
- PIN_PUDR_PULLUP(GPIOE_5) | \
- PIN_PUDR_PULLUP(GPIOE_6) | \
- PIN_PUDR_PULLUP(GPIOE_7) | \
- PIN_PUDR_PULLUP(GPIOE_8) | \
- PIN_PUDR_PULLUP(GPIOE_9) | \
- PIN_PUDR_PULLUP(GPIOE_10) | \
- PIN_PUDR_PULLUP(GPIOE_11) | \
- PIN_PUDR_PULLUP(GPIOE_12) | \
- PIN_PUDR_PULLUP(GPIOE_13) | \
- PIN_PUDR_PULLUP(GPIOE_14) | \
- PIN_PUDR_PULLUP(GPIOE_15))
-#define VAL_GPIOE_ODR 0xFFFFFFF7
-#define VAL_GPIOE_AFRL 0x00000000
-#define VAL_GPIOE_AFRH 0x00000000
-
-/*
- * Port F setup.
- *
- * PF0 - GPIOF_0 (input pull-up).
- * PF1 - GPIOF_1 (input pull-up).
- * PF2 - GPIOF_2 (input pull-up).
- * PF3 - GPIOF_3 (input pull-up).
- * PF4 - GPIOF_4 (input pull-up).
- * PF5 - GPIOF_5 (input pull-up).
- * PF6 - GPIOF_STAT1 (output push-pull).
- * PF7 - GPIOF_STAT2 (output push-pull).
- * PF8 - GPIOF_STAT3 (output push-pull).
- * PF9 - GPIOF_CAM_PWR (output push-pull).
- * PF10 - GPIOF_10 (input pull-up).
- * PF11 - GPIOF_CAM_RS (output push-pull).
- * PF12 - GPIOF_12 (input pull-up).
- * PF13 - GPIOF_13 (input pull-up).
- * PF14 - GPIOF_14 (input pull-up).
- * PF15 - GPIOF_15 (input pull-up).
- */
-#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_0) | \
- PIN_MODE_INPUT(GPIOF_1) | \
- PIN_MODE_INPUT(GPIOF_2) | \
- PIN_MODE_INPUT(GPIOF_3) | \
- PIN_MODE_INPUT(GPIOF_4) | \
- PIN_MODE_INPUT(GPIOF_5) | \
- PIN_MODE_OUTPUT(GPIOF_STAT1) | \
- PIN_MODE_OUTPUT(GPIOF_STAT2) | \
- PIN_MODE_OUTPUT(GPIOF_STAT3) | \
- PIN_MODE_OUTPUT(GPIOF_CAM_PWR) | \
- PIN_MODE_INPUT(GPIOF_10) | \
- PIN_MODE_OUTPUT(GPIOF_CAM_RS) | \
- PIN_MODE_INPUT(GPIOF_12) | \
- PIN_MODE_INPUT(GPIOF_13) | \
- PIN_MODE_INPUT(GPIOF_14) | \
- PIN_MODE_INPUT(GPIOF_15))
-#define VAL_GPIOF_OTYPER 0x00000000
-#define VAL_GPIOF_OSPEEDR 0xFFFFFFFF
-#define VAL_GPIOF_PUPDR (PIN_PUDR_PULLUP(GPIOF_0) | \
- PIN_PUDR_PULLUP(GPIOF_1) | \
- PIN_PUDR_PULLUP(GPIOF_2) | \
- PIN_PUDR_PULLUP(GPIOF_3) | \
- PIN_PUDR_PULLUP(GPIOF_4) | \
- PIN_PUDR_PULLUP(GPIOF_5) | \
- PIN_PUDR_PULLUP(GPIOF_10) | \
- PIN_PUDR_PULLUP(GPIOF_12) | \
- PIN_PUDR_PULLUP(GPIOF_13) | \
- PIN_PUDR_PULLUP(GPIOF_14) | \
- PIN_PUDR_PULLUP(GPIOF_15))
-#define VAL_GPIOF_ODR 0xFFFFFC3F
-#define VAL_GPIOF_AFRL 0x00000000
-#define VAL_GPIOF_AFRH 0x00000000
-
-/*
- * Port G setup.
- *
- * PG0 - GPIOG_0 (input pull-up).
- * PG1 - GPIOG_1 (input pull-up).
- * PG2 - GPIOG_2 (input pull-up).
- * PG3 - GPIOG_3 (input pull-up).
- * PG4 - GPIOG_4 (input pull-up).
- * PG5 - GPIOG_5 (input pull-up).
- * PG6 - GPIOG_RIGHT (input floating).
- * PG7 - GPIOG_UP (input floating).
- * PG8 - GPIOG_DOWN (input floating).
- * PG9 - GPIOG_USART6_RX (alternate 8).
- * PG10 - GPIOG_10 (input pull-up).
- * PG11 - GPIOG_LEFT (input floating).
- * PG12 - GPIOG_12 (input pull-up).
- * PG13 - GPIOG_ETH_RMII_TXD0 (alternate 11).
- * PG14 - GPIOG_ETH_RMII_TXD1 (alternate 11).
- * PG15 - GPIOG_CENT (input pull-up).
- */
-#define VAL_GPIOG_MODER (PIN_MODE_INPUT(GPIOG_0) | \
- PIN_MODE_INPUT(GPIOG_1) | \
- PIN_MODE_INPUT(GPIOG_2) | \
- PIN_MODE_INPUT(GPIOG_3) | \
- PIN_MODE_INPUT(GPIOG_4) | \
- PIN_MODE_INPUT(GPIOG_5) | \
- PIN_MODE_INPUT(GPIOG_RIGHT) | \
- PIN_MODE_INPUT(GPIOG_UP) | \
- PIN_MODE_INPUT(GPIOG_DOWN) | \
- PIN_MODE_ALTERNATE(GPIOG_USART6_RX) | \
- PIN_MODE_INPUT(GPIOG_10) | \
- PIN_MODE_INPUT(GPIOG_LEFT) | \
- PIN_MODE_INPUT(GPIOG_12) | \
- PIN_MODE_ALTERNATE(GPIOG_ETH_RMII_TXD0) | \
- PIN_MODE_ALTERNATE(GPIOG_ETH_RMII_TXD1) | \
- PIN_MODE_INPUT(GPIOG_CENT))
-#define VAL_GPIOG_OTYPER 0x00000000
-#define VAL_GPIOG_OSPEEDR 0xFFFFFFFF
-#define VAL_GPIOG_PUPDR (PIN_PUDR_PULLUP(GPIOG_0) | \
- PIN_PUDR_PULLUP(GPIOG_1) | \
- PIN_PUDR_PULLUP(GPIOG_2) | \
- PIN_PUDR_PULLUP(GPIOG_3) | \
- PIN_PUDR_PULLUP(GPIOG_4) | \
- PIN_PUDR_PULLUP(GPIOG_5) | \
- PIN_PUDR_PULLUP(GPIOG_10) | \
- PIN_PUDR_PULLUP(GPIOG_12))
-#define VAL_GPIOG_ODR 0xFFFFFFFF
-#define VAL_GPIOG_AFRL 0x00000000
-#define VAL_GPIOG_AFRH (PIN_AFIO_AF(GPIOG_USART6_RX, 8) | \
- PIN_AFIO_AF(GPIOG_ETH_RMII_TXD0, 11) | \
- PIN_AFIO_AF(GPIOG_ETH_RMII_TXD1, 11))
-
-/*
- * Port H setup.
- * All input with pull-up except:
- * PH0 - GPIOH_OSC_IN (input floating).
- * PH1 - GPIOH_OSC_OUT (input floating).
- */
-#define VAL_GPIOH_MODER (PIN_MODE_INPUT(GPIOH_OSC_IN) | \
- PIN_MODE_INPUT(GPIOH_OSC_OUT) | \
- PIN_MODE_INPUT(2) | \
- PIN_MODE_INPUT(3) | \
- PIN_MODE_INPUT(4) | \
- PIN_MODE_INPUT(5) | \
- PIN_MODE_INPUT(6) | \
- PIN_MODE_INPUT(7) | \
- PIN_MODE_INPUT(8) | \
- PIN_MODE_INPUT(9) | \
- PIN_MODE_INPUT(10) | \
- PIN_MODE_INPUT(11) | \
- PIN_MODE_INPUT(12) | \
- PIN_MODE_INPUT(13) | \
- PIN_MODE_INPUT(14) | \
- PIN_MODE_INPUT(15))
-#define VAL_GPIOH_OTYPER 0x00000000
-#define VAL_GPIOH_OSPEEDR 0xFFFFFFFF
-#define VAL_GPIOH_PUPDR (PIN_PUDR_FLOATING(GPIOH_OSC_IN) | \
- PIN_PUDR_FLOATING(GPIOH_OSC_OUT) | \
- PIN_PUDR_PULLUP(2) | \
- PIN_PUDR_PULLUP(3) | \
- PIN_PUDR_PULLUP(4) | \
- PIN_PUDR_PULLUP(5) | \
- PIN_PUDR_PULLUP(6) | \
- PIN_PUDR_PULLUP(7) | \
- PIN_PUDR_PULLUP(8) | \
- PIN_PUDR_PULLUP(9) | \
- PIN_PUDR_PULLUP(10) | \
- PIN_PUDR_PULLUP(11) | \
- PIN_PUDR_PULLUP(12) | \
- PIN_PUDR_PULLUP(13) | \
- PIN_PUDR_PULLUP(14) | \
- PIN_PUDR_PULLUP(15))
-#define VAL_GPIOH_ODR 0xFFFFFFFF
-#define VAL_GPIOH_AFRL 0x00000000
-#define VAL_GPIOH_AFRH 0x00000000
-
-/*
- * Port I setup.
- * All input with pull-up.
- */
-#define VAL_GPIOI_MODER 0x00000000
-#define VAL_GPIOI_OTYPER 0x00000000
-#define VAL_GPIOI_OSPEEDR 0xFFFFFFFF
-#define VAL_GPIOI_PUPDR (PIN_PUDR_PULLUP(0) | \
- PIN_PUDR_PULLUP(1) | \
- PIN_PUDR_PULLUP(2) | \
- PIN_PUDR_PULLUP(3) | \
- PIN_PUDR_PULLUP(4) | \
- PIN_PUDR_PULLUP(5) | \
- PIN_PUDR_PULLUP(6) | \
- PIN_PUDR_PULLUP(7) | \
- PIN_PUDR_PULLUP(8) | \
- PIN_PUDR_PULLUP(9) | \
- PIN_PUDR_PULLUP(10) | \
- PIN_PUDR_PULLUP(11) | \
- PIN_PUDR_PULLUP(12) | \
- PIN_PUDR_PULLUP(13) | \
- PIN_PUDR_PULLUP(14) | \
- PIN_PUDR_PULLUP(15))
-#define VAL_GPIOI_ODR 0xFFFFFFFF
-#define VAL_GPIOI_AFRL 0x00000000
-#define VAL_GPIOI_AFRH 0x00000000
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
diff --git a/boards/OLIMEX_STM32_P407/board.mk b/boards/OLIMEX_STM32_P407/board.mk deleted file mode 100644 index b1e5aafe2..000000000 --- a/boards/OLIMEX_STM32_P407/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files.
-BOARDSRC = ${CHIBIOS}/boards/OLIMEX_STM32_P407/board.c
-
-# Required include directories
-BOARDINC = ${CHIBIOS}/boards/OLIMEX_STM32_P407
diff --git a/boards/RAISONANCE_REVA_STM8S/board.c b/boards/RAISONANCE_REVA_STM8S/board.c deleted file mode 100644 index 33e1fa1e9..000000000 --- a/boards/RAISONANCE_REVA_STM8S/board.c +++ /dev/null @@ -1,78 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-/**
- * @brief PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- */
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-ROMCONST PALConfig pal_default_config =
-{
- {
- {VAL_GPIOAODR, 0, VAL_GPIOADDR, VAL_GPIOACR1, VAL_GPIOACR2},
- {VAL_GPIOBODR, 0, VAL_GPIOBDDR, VAL_GPIOBCR1, VAL_GPIOBCR2},
- {VAL_GPIOCODR, 0, VAL_GPIOCDDR, VAL_GPIOCCR1, VAL_GPIOCCR2},
- {VAL_GPIODODR, 0, VAL_GPIODDDR, VAL_GPIODCR1, VAL_GPIODCR2},
- {VAL_GPIOEODR, 0, VAL_GPIOEDDR, VAL_GPIOECR1, VAL_GPIOECR2},
- {VAL_GPIOFODR, 0, VAL_GPIOFDDR, VAL_GPIOFCR1, VAL_GPIOFCR2},
- {VAL_GPIOGODR, 0, VAL_GPIOGDDR, VAL_GPIOGCR1, VAL_GPIOGCR2},
- }
-};
-#endif
-
-/*
- * TIM 2 clock after the prescaler.
- */
-#define TIM2_CLOCK (SYSCLK / 16)
-#define TIM2_ARR ((TIM2_CLOCK / CH_FREQUENCY) - 1)
-
-/*
- * TIM2 interrupt handler.
- */
-CH_IRQ_HANDLER(13) {
-
- CH_IRQ_PROLOGUE();
-
- chSysLockFromIsr();
- chSysTimerHandlerI();
- chSysUnlockFromIsr();
-
- TIM2->SR1 = 0;
-
- CH_IRQ_EPILOGUE();
-}
-
-/*
- * Board-specific initialization code.
- */
-void boardInit(void) {
-
- /*
- * TIM2 initialization as system tick.
- */
- CLK->PCKENR1 |= CLK_PCKENR1_TIM2;
- TIM2->PSCR = 4; /* Prescaler divide by 2^4=16.*/
- TIM2->ARRH = (uint8_t)(TIM2_ARR >> 8);
- TIM2->ARRL = (uint8_t)(TIM2_ARR);
- TIM2->CNTRH = 0;
- TIM2->CNTRL = 0;
- TIM2->SR1 = 0;
- TIM2->IER = TIM2_IER_UIE;
- TIM2->CR1 = TIM2_CR1_CEN;
-}
diff --git a/boards/RAISONANCE_REVA_STM8S/board.h b/boards/RAISONANCE_REVA_STM8S/board.h deleted file mode 100644 index d61e50513..000000000 --- a/boards/RAISONANCE_REVA_STM8S/board.h +++ /dev/null @@ -1,184 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for Raisonance REva V3 + STM8S208RB daughter board.
- */
-
-/*
- * Board identifiers.
- */
-#define BOARD_REVA_V3_STM8S208RB
-#define BOARD_NAME "Raisonance REva V3 + STM8S208RB"
-
-/*
- * Board frequencies.
- */
-#define HSECLK 0
-
-/*
- * MCU model used on the board.
- */
-#define STM8S208
-
-/*
- * Pin definitions.
- */
-#define PA_OSCIN 1
-#define PA_J2_25 2 /* It is also OSCOUT. */
-#define PA_J2_27 3
-#define PA_RX 4
-#define PA_TX 5
-
-#define PB_LED(n) (n)
-#define PB_LCD_D0 0
-#define PB_LCD_D1 1
-#define PB_LCD_CSB 2
-#define PB_LCD_RESB 3
-
-#define PC_ADC_ETR 0
-#define PC_J2_51 1
-#define PC_J2_53 2
-#define PC_J2_55 3
-#define PC_J2_57 4
-#define PC_SCK 5
-#define PC_MOSI 6
-#define PC_MISO 7
-
-#define PD_J2_69 0
-#define PD_J2_21 1
-#define PD_J2_67 2
-#define PD_J2_65 3
-#define PD_PWM 4
-#define PD_J2_63 5
-#define PD_J2_61 6
-#define PD_J2_59 7
-
-#define PE_P2_49 0
-#define PE_SCL 1
-#define PE_SDA 2
-#define PE_P2_47 3
-#define PE_P2_45 4
-#define PE_P2_43 5
-#define PE_P2_41 6
-#define PE_P2_39 7
-
-#define PF_J2_37 0
-#define PF_J2_35 1
-#define PF_J2_33 2
-#define PF_J2_31 3
-#define PF_ANA_IN1 4
-#define PF_ANA_IN2 5
-#define PF_ANA_TEMP 6
-#define PF_ANA_POT 7
-
-#define PG_CAN_TX 0
-#define PG_CAN_RX 1
-#define PG_BT5 2
-#define PG_BT6 3
-#define PG_SW4 4
-#define PG_SW3 5
-#define PG_SW2 6
-#define PG_SW1 7
-
-#define PI_J2_71 0
-
-/*
- * Port A initial setup.
- */
-#define VAL_GPIOAODR (1 << PA_TX) /* PA_TX initially to 1. */
-#define VAL_GPIOADDR (1 << PA_TX) /* PA_TX output, others inputs. */
-#define VAL_GPIOACR1 0xFF /* All pull-up or push-pull. */
-#define VAL_GPIOACR2 0
-
-/*
- * Port B initial setup.
- */
-#define VAL_GPIOBODR 0xFF /* Initially all set to high. */
-#define VAL_GPIOBDDR 0xFF /* All outputs. */
-#define VAL_GPIOBCR1 0xFF /* All push-pull. */
-#define VAL_GPIOBCR2 0
-
-/*
- * Port C initial setup.
- */
-#define VAL_GPIOCODR 0
-#define VAL_GPIOCDDR 0 /* All inputs. */
-#define VAL_GPIOCCR1 0xFF /* All pull-up. */
-#define VAL_GPIOCCR2 0
-
-/*
- * Port D initial setup.
- */
-#define VAL_GPIODODR 0
-#define VAL_GPIODDDR 0 /* All inputs. */
-#define VAL_GPIODCR1 0xFF /* All pull-up. */
-#define VAL_GPIODCR2 0
-
-/*
- * Port E initial setup.
- */
-#define VAL_GPIOEODR 0
-#define VAL_GPIOEDDR 0 /* All inputs. */
-#define VAL_GPIOECR1 0xFF /* All pull-up. */
-#define VAL_GPIOECR2 0
-
-/*
- * Port F initial setup.
- */
-#define VAL_GPIOFODR 0
-#define VAL_GPIOFDDR 0 /* All inputs. */
-#define VAL_GPIOFCR1 0xFF /* All pull-up. */
-#define VAL_GPIOFCR2 0
-
-/*
- * Port G initial setup.
- */
-#define VAL_GPIOGODR (1 << PG_CAN_TX)/* CAN_TX initially to 1. */
-#define VAL_GPIOGDDR (1 << PG_CAN_TX)/* CAN_TX output, others inputs. */
-#define VAL_GPIOGCR1 0xFF /* All pull-up or push-pull. */
-#define VAL_GPIOGCR2 0
-
-/*
- * Port H initial setup (dummy, not present).
- */
-#define VAL_GPIOHODR 0
-#define VAL_GPIOHDDR 0 /* All inputs. */
-#define VAL_GPIOHCR1 0xFF /* All pull-up. */
-#define VAL_GPIOHCR2 0
-
-/*
- * Port I initial setup.
- */
-#define VAL_GPIOIODR 0
-#define VAL_GPIOIDDR 0 /* All inputs. */
-#define VAL_GPIOICR1 0xFF /* All pull-up. */
-#define VAL_GPIOICR2 0
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
diff --git a/boards/STUDIEL_AT91SAM7A3_EK/board.c b/boards/STUDIEL_AT91SAM7A3_EK/board.c deleted file mode 100644 index 2a3dc015b..000000000 --- a/boards/STUDIEL_AT91SAM7A3_EK/board.c +++ /dev/null @@ -1,109 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-/**
- * @brief PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- * This variable is used by the HAL when initializing the PAL driver.
- */
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-const PALConfig pal_default_config =
-{
- {VAL_PIOA_ODSR, VAL_PIOA_OSR, VAL_PIOA_PUSR},
-#if (SAM7_PLATFORM == SAM7X128) || (SAM7_PLATFORM == SAM7X256) || \
- (SAM7_PLATFORM == SAM7X512) || (SAM7_PLATFORM == SAM7A3)
- {VAL_PIOB_ODSR, VAL_PIOB_OSR, VAL_PIOB_PUSR}
-#endif
-};
-#endif
-
-/*
- * SYS IRQ handling here.
- */
-static CH_IRQ_HANDLER(SYSIrqHandler) {
-
- CH_IRQ_PROLOGUE();
-
- if (AT91C_BASE_PITC->PITC_PISR & AT91C_PITC_PITS) {
- (void) AT91C_BASE_PITC->PITC_PIVR;
- chSysLockFromIsr();
- chSysTimerHandlerI();
- chSysUnlockFromIsr();
- }
-
-#if USE_SAM7_DBGU_UART
- if (AT91C_BASE_DBGU->DBGU_CSR &
- (AT91C_US_RXRDY | AT91C_US_TXRDY | AT91C_US_PARE | AT91C_US_FRAME | AT91C_US_OVRE | AT91C_US_RXBRK)) {
- sd_lld_serve_interrupt(&SDDBG);
- }
-#endif
- AT91C_BASE_AIC->AIC_EOICR = 0;
- CH_IRQ_EPILOGUE();
-}
-
-/*
- * Early initialization code.
- * This initialization must be performed just after stack setup and before
- * any other initialization.
- */
-void __early_init(void) {
-
- /* Watchdog disabled.*/
- AT91C_BASE_WDTC->WDTC_WDMR = AT91C_WDTC_WDDIS;
-
- at91sam7_clock_init();
-}
-
-#if HAL_USE_MMC_SPI
-/* Board-related functions related to the MMC_SPI driver.*/
-bool_t mmc_lld_is_card_inserted(MMCDriver *mmcp) {
-
- (void)mmcp;
- return !palReadPad(IOPORT2, PIOB_MMC_CP);
-}
-
-bool_t mmc_lld_is_write_protected(MMCDriver *mmcp) {
-
- (void)mmcp;
- return palReadPad(IOPORT2, PIOB_MMC_WP);
-}
-#endif
-
-/*
- * Board-specific initialization code.
- */
-void boardInit(void) {
-
- /*
- * PIT Initialization.
- */
- AIC_ConfigureIT(AT91C_ID_SYS,
- AT91C_AIC_SRCTYPE_HIGH_LEVEL | (AT91C_AIC_PRIOR_HIGHEST - 1),
- SYSIrqHandler);
- AIC_EnableIT(AT91C_ID_SYS);
- AT91C_BASE_PITC->PITC_PIMR = (MCK / 16 / CH_FREQUENCY) - 1;
- AT91C_BASE_PITC->PITC_PIMR |= AT91C_PITC_PITEN | AT91C_PITC_PITIEN;
-
- /*
- * RTS/CTS pins enabled for USART0 only.
- */
- AT91C_BASE_PIOA->PIO_PDR = AT91C_PA3_RTS0 | AT91C_PA4_CTS0;
- AT91C_BASE_PIOA->PIO_ASR = AT91C_PIO_PA3 | AT91C_PIO_PA4;
- AT91C_BASE_PIOA->PIO_PPUDR = AT91C_PIO_PA3 | AT91C_PIO_PA4;
-}
diff --git a/boards/STUDIEL_AT91SAM7A3_EK/board.h b/boards/STUDIEL_AT91SAM7A3_EK/board.h deleted file mode 100644 index 1bb61e40c..000000000 --- a/boards/STUDIEL_AT91SAM7A3_EK/board.h +++ /dev/null @@ -1,93 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for the Studiel AT91SAM7A3-EK board.
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_STUDIEL_AT91SAM7A3_EK
-#define BOARD_NAME "Studiel AT91SAM7A3-EK eval. board"
-
-/*
- * Select your platform by modifying the following line.
- */
-#if !defined(SAM7A3_PLATFORM)
-#define SAM7_PLATFORM SAM7A3
-#endif
-
-#include "at91sam7.h"
-
-#define CLK 18432000
-#define MCK 48054857
-
-/*
- * I/O definitions.
- */
-#define PIOA_RXD0 2
-#define PIOA_RXD0_MASK (1 << PIOA_RXD0)
-#define PIOA_TXD0 3
-#define PIOA_TXD0_MASK (1 << PIOA_TXD0)
-#define PIOA_LED1 20
-#define PIOA_LED1_MASK (1 << PIOA_LED1)
-#define PIOA_LED2 21
-#define PIOA_LED2_MASK (1 << PIOA_LED2)
-#define PIOA_LED3 24
-#define PIOA_LED3_MASK (1 << PIOA_LED3)
-#define PIOA_LED4 25
-#define PIOA_LED4_MASK (1 << PIOA_LED4)
-// mmc-spi
-#define PIOA_SPI0_NSS 14
-#define PIOA_SPI0_NSS_MASK (1 << PIOA_SPI0_NSS)
-#define PIOA_SPI0_MISO 15
-#define PIOA_SPI0_MISO_MASK (1 << PIOA_SPI0_MISO)
-#define PIOA_SPI0_MOSI 16
-#define PIOA_SPI0_MOSI_MASK (1 << PIOA_SPI0_MOSI)
-#define PIOA_SPI0_CLK 17
-#define PIOA_SPI0_CLK_MASK (1 << PIOA_SPI0_CLK)
-
-/*
- * Initial I/O setup.
- */
-/* Output data. */
-#define VAL_PIOA_ODSR 0x00000000
-/* Direction. */
-#define VAL_PIOA_OSR 0x00000000 | PIOA_LED1_MASK | PIOA_LED2_MASK | \
- PIOA_LED3_MASK | PIOA_LED4_MASK
-/* Pull-up. */
-#define VAL_PIOA_PUSR 0xFFFFFFFF
-
-#define VAL_PIOB_ODSR 0x00000000 /* Output data. */
-#define VAL_PIOB_OSR 0x00000000 /* Direction. */
-#define VAL_PIOB_PUSR 0xFFFFFFFF /* Pull-up. */
-
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
diff --git a/boards/ST_EVB_SPC560BC/board.c b/boards/ST_EVB_SPC560BC/board.c deleted file mode 100644 index 5c067606b..000000000 --- a/boards/ST_EVB_SPC560BC/board.c +++ /dev/null @@ -1,67 +0,0 @@ -/*
- SPC5 HAL - Copyright (C) 2013 STMicroelectronics
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-/* Initial setup of all defined pads, the list is terminated by a {-1, 0, 0}.*/
-static const spc_siu_init_t spc_siu_init[] = {
- {PCR(PORT_B, PB_LIN0_TDX), PAL_HIGH, PAL_MODE_OUTPUT_ALTERNATE(1)},
- {PCR(PORT_B, PB_LIN0_RDX), PAL_HIGH, PAL_MODE_INPUT},
- {PCR(PORT_E, PE_BUTTON1), PAL_LOW, PAL_MODE_INPUT},
- {PCR(PORT_E, PE_BUTTON2), PAL_LOW, PAL_MODE_INPUT},
- {PCR(PORT_E, PE_BUTTON3), PAL_LOW, PAL_MODE_INPUT},
- {PCR(PORT_E, PE_BUTTON4), PAL_LOW, PAL_MODE_INPUT},
- {PCR(PORT_E, PE_LED1), PAL_HIGH, PAL_MODE_OUTPUT_PUSHPULL},
- {PCR(PORT_E, PE_LED2), PAL_HIGH, PAL_MODE_OUTPUT_PUSHPULL},
- {PCR(PORT_E, PE_LED3), PAL_HIGH, PAL_MODE_OUTPUT_PUSHPULL},
- {PCR(PORT_E, PE_LED4), PAL_HIGH, PAL_MODE_OUTPUT_PUSHPULL},
- {-1, 0, 0}
-};
-
-/* Initialization array for the PSMI registers.*/
-static const uint8_t spc_padsels_init[SPC5_SIUL_NUM_PADSELS] = {
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
-};
-
-/**
- * @brief PAL setup.
- */
-const PALConfig pal_default_config = {
- PAL_MODE_UNCONNECTED, /* Default mode for all undefined pads. */
- spc_siu_init,
- spc_padsels_init
-};
-#endif
-
-/*
- * Early initialization code.
- * This initialization must be performed just after stack setup and before
- * any other initialization.
- */
-void __early_init(void) {
-
- spc_clock_init();
-}
-
-/*
- * Board-specific initialization code.
- */
-void boardInit(void) {
-
-}
diff --git a/boards/ST_EVB_SPC560BC/board.h b/boards/ST_EVB_SPC560BC/board.h deleted file mode 100644 index 70e3ee548..000000000 --- a/boards/ST_EVB_SPC560BC/board.h +++ /dev/null @@ -1,68 +0,0 @@ -/*
- SPC5 HAL - Copyright (C) 2013 STMicroelectronics
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for a generic SPC560B/Cxx proto board.
- */
-
-/*
- * Board identifiers.
- */
-#define BOARD_GENERIC_SPC560BC
-#define BOARD_NAME "Generic SPC560B/Cxx"
-
-/*
- * Board frequencies.
- */
-#if !defined(SPC5_XOSC_CLK)
-#define SPC5_XOSC_CLK 8000000
-#endif
-
-/*
- * I/O definitions.
- */
-#define PB_LIN0_TDX 2
-#define PB_LIN0_RDX 3
-
-#define PE_BUTTON1 0
-#define PE_BUTTON2 1
-#define PE_BUTTON3 2
-#define PE_BUTTON4 3
-
-#define PE_LED1 4
-#define PE_LED2 5
-#define PE_LED3 6
-#define PE_LED4 7
-
-/*
- * Support macros.
- */
-#define PCR(port, pin) (((port) * 16) + (pin))
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
diff --git a/boards/ST_EVB_SPC560BC/board.mk b/boards/ST_EVB_SPC560BC/board.mk deleted file mode 100644 index 92aadc984..000000000 --- a/boards/ST_EVB_SPC560BC/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files.
-BOARDSRC = ${CHIBIOS}/boards/ST_EVB_SPC560BC/board.c
-
-# Required include directories
-BOARDINC = ${CHIBIOS}/boards/ST_EVB_SPC560BC
diff --git a/boards/ST_EVB_SPC560D/board.c b/boards/ST_EVB_SPC560D/board.c deleted file mode 100644 index fc5f2c6bc..000000000 --- a/boards/ST_EVB_SPC560D/board.c +++ /dev/null @@ -1,68 +0,0 @@ -/*
- SPC5 HAL - Copyright (C) 2013 STMicroelectronics
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-/* Initial setup of all defined pads, the list is terminated by a {-1, 0, 0}.*/
-static const spc_siu_init_t spc_siu_init[] = {
- {PCR(PORT_B, PB_LIN0_TDX), PAL_HIGH, PAL_MODE_OUTPUT_ALTERNATE(1)},
- {PCR(PORT_B, PB_LIN0_RDX), PAL_HIGH, PAL_MODE_INPUT},
- {PCR(PORT_E, PE_BUTTON1), PAL_LOW, PAL_MODE_INPUT},
- {PCR(PORT_E, PE_BUTTON2), PAL_LOW, PAL_MODE_INPUT},
- {PCR(PORT_E, PE_BUTTON3), PAL_LOW, PAL_MODE_INPUT},
- {PCR(PORT_E, PE_BUTTON4), PAL_LOW, PAL_MODE_INPUT},
- {PCR(PORT_E, PE_LED1), PAL_HIGH, PAL_MODE_OUTPUT_PUSHPULL},
- {PCR(PORT_E, PE_LED2), PAL_HIGH, PAL_MODE_OUTPUT_PUSHPULL},
- {PCR(PORT_E, PE_LED3), PAL_HIGH, PAL_MODE_OUTPUT_PUSHPULL},
- {PCR(PORT_E, PE_LED4), PAL_HIGH, PAL_MODE_OUTPUT_PUSHPULL},
- {-1, 0, 0}
-};
-
-/* Initialization array for the PSMI registers.*/
-static const uint8_t spc_padsels_init[SPC5_SIUL_NUM_PADSELS] = {
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0
-};
-
-/**
- * @brief PAL setup.
- */
-const PALConfig pal_default_config = {
- PAL_MODE_UNCONNECTED, /* Default mode for all undefined pads. */
- spc_siu_init,
- spc_padsels_init
-};
-#endif
-
-/*
- * Early initialization code.
- * This initialization must be performed just after stack setup and before
- * any other initialization.
- */
-void __early_init(void) {
-
- spc_clock_init();
-}
-
-/*
- * Board-specific initialization code.
- */
-void boardInit(void) {
-
-}
diff --git a/boards/ST_EVB_SPC560D/board.h b/boards/ST_EVB_SPC560D/board.h deleted file mode 100644 index bca6f7245..000000000 --- a/boards/ST_EVB_SPC560D/board.h +++ /dev/null @@ -1,68 +0,0 @@ -/*
- SPC5 HAL - Copyright (C) 2013 STMicroelectronics
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for a generic SPC560Dxx proto board.
- */
-
-/*
- * Board identifiers.
- */
-#define BOARD_GENERIC_SPC560D
-#define BOARD_NAME "Generic SPC560Dxx"
-
-/*
- * Board frequencies.
- */
-#if !defined(SPC5_XOSC_CLK)
-#define SPC5_XOSC_CLK 8000000
-#endif
-
-/*
- * I/O definitions.
- */
-#define PB_LIN0_TDX 2
-#define PB_LIN0_RDX 3
-
-#define PE_BUTTON1 0
-#define PE_BUTTON2 1
-#define PE_BUTTON3 2
-#define PE_BUTTON4 3
-
-#define PE_LED1 4
-#define PE_LED2 5
-#define PE_LED3 6
-#define PE_LED4 7
-
-/*
- * Support macros.
- */
-#define PCR(port, pin) (((port) * 16) + (pin))
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
diff --git a/boards/ST_EVB_SPC560D/board.mk b/boards/ST_EVB_SPC560D/board.mk deleted file mode 100644 index 8a18b37df..000000000 --- a/boards/ST_EVB_SPC560D/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files.
-BOARDSRC = ${CHIBIOS}/boards/ST_EVB_SPC560D/board.c
-
-# Required include directories
-BOARDINC = ${CHIBIOS}/boards/ST_EVB_SPC560D
diff --git a/boards/ST_EVB_SPC560P/board.c b/boards/ST_EVB_SPC560P/board.c deleted file mode 100644 index 5410436bb..000000000 --- a/boards/ST_EVB_SPC560P/board.c +++ /dev/null @@ -1,68 +0,0 @@ -/*
- SPC5 HAL - Copyright (C) 2013 STMicroelectronics
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-/* Initial setup of all defined pads, the list is terminated by a {-1, 0, 0}.*/
-static const spc_siu_init_t spc_siu_init[] = {
- {PCR(PORT_B, PB_LIN0_TDX), PAL_HIGH, PAL_MODE_OUTPUT_ALTERNATE(1)},
- {PCR(PORT_B, PB_LIN0_RDX), PAL_HIGH, PAL_MODE_INPUT},
- {PCR(PORT_D, PD_BUTTON1), PAL_LOW, PAL_MODE_INPUT},
- {PCR(PORT_D, PD_BUTTON2), PAL_LOW, PAL_MODE_INPUT},
- {PCR(PORT_D, PD_BUTTON3), PAL_LOW, PAL_MODE_INPUT},
- {PCR(PORT_D, PD_BUTTON4), PAL_LOW, PAL_MODE_INPUT},
- {PCR(PORT_D, PD_LED1), PAL_HIGH, PAL_MODE_OUTPUT_PUSHPULL},
- {PCR(PORT_D, PD_LED2), PAL_HIGH, PAL_MODE_OUTPUT_PUSHPULL},
- {PCR(PORT_D, PD_LED3), PAL_HIGH, PAL_MODE_OUTPUT_PUSHPULL},
- {PCR(PORT_D, PD_LED4), PAL_HIGH, PAL_MODE_OUTPUT_PUSHPULL},
- {-1, 0, 0}
-};
-
-/* Initialization array for the PSMI registers.*/
-static const uint8_t spc_padsels_init[SPC5_SIUL_NUM_PADSELS] = {
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0
-};
-
-/**
- * @brief PAL setup.
- */
-const PALConfig pal_default_config = {
- PAL_MODE_UNCONNECTED, /* Default mode for all undefined pads. */
- spc_siu_init,
- spc_padsels_init
-};
-#endif
-
-/*
- * Early initialization code.
- * This initialization must be performed just after stack setup and before
- * any other initialization.
- */
-void __early_init(void) {
-
- spc_clock_init();
-}
-
-/*
- * Board-specific initialization code.
- */
-void boardInit(void) {
-
-}
diff --git a/boards/ST_EVB_SPC560P/board.h b/boards/ST_EVB_SPC560P/board.h deleted file mode 100644 index a02225c13..000000000 --- a/boards/ST_EVB_SPC560P/board.h +++ /dev/null @@ -1,68 +0,0 @@ -/*
- SPC5 HAL - Copyright (C) 2013 STMicroelectronics
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for a generic SPC560Pxx proto board.
- */
-
-/*
- * Board identifiers.
- */
-#define BOARD_GENERIC_SPC560P
-#define BOARD_NAME "Generic SPC560Pxx"
-
-/*
- * Board frequencies.
- */
-#if !defined(SPC5_XOSC_CLK)
-#define SPC5_XOSC_CLK 40000000
-#endif
-
-/*
- * I/O definitions.
- */
-#define PB_LIN0_TDX 2
-#define PB_LIN0_RDX 3
-
-#define PD_BUTTON1 0
-#define PD_BUTTON2 1
-#define PD_BUTTON3 2
-#define PD_BUTTON4 3
-
-#define PD_LED1 4
-#define PD_LED2 5
-#define PD_LED3 6
-#define PD_LED4 7
-
-/*
- * Support macros.
- */
-#define PCR(port, pin) (((port) * 16) + (pin))
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
diff --git a/boards/ST_EVB_SPC560P/board.mk b/boards/ST_EVB_SPC560P/board.mk deleted file mode 100644 index 01d5f533b..000000000 --- a/boards/ST_EVB_SPC560P/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files.
-BOARDSRC = ${CHIBIOS}/boards/ST_EVB_SPC560P/board.c
-
-# Required include directories
-BOARDINC = ${CHIBIOS}/boards/ST_EVB_SPC560P
diff --git a/boards/ST_EVB_SPC563M/board.c b/boards/ST_EVB_SPC563M/board.c deleted file mode 100644 index 523d1d7e5..000000000 --- a/boards/ST_EVB_SPC563M/board.c +++ /dev/null @@ -1,59 +0,0 @@ -/*
- SPC5 HAL - Copyright (C) 2013 STMicroelectronics
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-/* Initial setup of all defined pads, the list is terminated by a {-1, 0, 0}.*/
-static const spc_siu_init_t spc_siu_init[] = {
- {PCR(PORT5, P5_ESCI_A_TX), PAL_HIGH, PAL_MODE_OUTPUT_ALTERNATE(1)},
- {PCR(PORT5, P5_ESCI_A_RX), PAL_HIGH, PAL_MODE_OUTPUT_ALTERNATE(1)},
- {PCR(PORT11, P11_BUTTON1), PAL_LOW, PAL_MODE_INPUT},
- {PCR(PORT11, P11_BUTTON2), PAL_LOW, PAL_MODE_INPUT},
- {PCR(PORT11, P11_BUTTON3), PAL_LOW, PAL_MODE_INPUT},
- {PCR(PORT11, P11_BUTTON4), PAL_LOW, PAL_MODE_INPUT},
- {PCR(PORT11, P11_LED1), PAL_HIGH, PAL_MODE_OUTPUT_PUSHPULL},
- {PCR(PORT11, P11_LED2), PAL_HIGH, PAL_MODE_OUTPUT_PUSHPULL},
- {PCR(PORT11, P11_LED3), PAL_HIGH, PAL_MODE_OUTPUT_PUSHPULL},
- {PCR(PORT11, P11_LED4), PAL_HIGH, PAL_MODE_OUTPUT_PUSHPULL},
- {-1, 0, 0}
-};
-
-/**
- * @brief PAL setup.
- */
-const PALConfig pal_default_config = {
- spc_siu_init
-};
-#endif
-
-/*
- * Early initialization code.
- * This initialization must be performed just after stack setup and before
- * any other initialization.
- */
-void __early_init(void) {
-
- spc_clock_init();
-}
-
-/*
- * Board-specific initialization code.
- */
-void boardInit(void) {
-
-}
diff --git a/boards/ST_EVB_SPC563M/board.h b/boards/ST_EVB_SPC563M/board.h deleted file mode 100644 index 3a258f2f9..000000000 --- a/boards/ST_EVB_SPC563M/board.h +++ /dev/null @@ -1,68 +0,0 @@ -/*
- SPC5 HAL - Copyright (C) 2013 STMicroelectronics
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for a generic SPC563Mxx proto board.
- */
-
-/*
- * Board identifiers.
- */
-#define BOARD_GENERIC_SPC563M
-#define BOARD_NAME "Generic SPC563Mxx"
-
-/*
- * Board frequencies.
- */
-#if !defined(SPC5_XOSC_CLK)
-#define SPC5_XOSC_CLK 8000000
-#endif
-
-/*
- * I/O definitions.
- */
-#define P5_ESCI_A_TX 9
-#define P5_ESCI_A_RX 10
-
-#define P11_BUTTON1 3
-#define P11_BUTTON2 5
-#define P11_BUTTON3 7
-#define P11_BUTTON4 9
-
-#define P11_LED1 12
-#define P11_LED2 13
-#define P11_LED3 14
-#define P11_LED4 15
-
-/*
- * Support macros.
- */
-#define PCR(port, pin) (((port) * 16) + (pin))
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
diff --git a/boards/ST_EVB_SPC563M/board.mk b/boards/ST_EVB_SPC563M/board.mk deleted file mode 100644 index 63b4368ec..000000000 --- a/boards/ST_EVB_SPC563M/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files.
-BOARDSRC = ${CHIBIOS}/boards/ST_EVB_SPC563M/board.c
-
-# Required include directories
-BOARDINC = ${CHIBIOS}/boards/ST_EVB_SPC563M
diff --git a/boards/ST_EVB_SPC564A/board.c b/boards/ST_EVB_SPC564A/board.c deleted file mode 100644 index 523d1d7e5..000000000 --- a/boards/ST_EVB_SPC564A/board.c +++ /dev/null @@ -1,59 +0,0 @@ -/*
- SPC5 HAL - Copyright (C) 2013 STMicroelectronics
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-/* Initial setup of all defined pads, the list is terminated by a {-1, 0, 0}.*/
-static const spc_siu_init_t spc_siu_init[] = {
- {PCR(PORT5, P5_ESCI_A_TX), PAL_HIGH, PAL_MODE_OUTPUT_ALTERNATE(1)},
- {PCR(PORT5, P5_ESCI_A_RX), PAL_HIGH, PAL_MODE_OUTPUT_ALTERNATE(1)},
- {PCR(PORT11, P11_BUTTON1), PAL_LOW, PAL_MODE_INPUT},
- {PCR(PORT11, P11_BUTTON2), PAL_LOW, PAL_MODE_INPUT},
- {PCR(PORT11, P11_BUTTON3), PAL_LOW, PAL_MODE_INPUT},
- {PCR(PORT11, P11_BUTTON4), PAL_LOW, PAL_MODE_INPUT},
- {PCR(PORT11, P11_LED1), PAL_HIGH, PAL_MODE_OUTPUT_PUSHPULL},
- {PCR(PORT11, P11_LED2), PAL_HIGH, PAL_MODE_OUTPUT_PUSHPULL},
- {PCR(PORT11, P11_LED3), PAL_HIGH, PAL_MODE_OUTPUT_PUSHPULL},
- {PCR(PORT11, P11_LED4), PAL_HIGH, PAL_MODE_OUTPUT_PUSHPULL},
- {-1, 0, 0}
-};
-
-/**
- * @brief PAL setup.
- */
-const PALConfig pal_default_config = {
- spc_siu_init
-};
-#endif
-
-/*
- * Early initialization code.
- * This initialization must be performed just after stack setup and before
- * any other initialization.
- */
-void __early_init(void) {
-
- spc_clock_init();
-}
-
-/*
- * Board-specific initialization code.
- */
-void boardInit(void) {
-
-}
diff --git a/boards/ST_EVB_SPC564A/board.h b/boards/ST_EVB_SPC564A/board.h deleted file mode 100644 index 67084dd79..000000000 --- a/boards/ST_EVB_SPC564A/board.h +++ /dev/null @@ -1,68 +0,0 @@ -/*
- SPC5 HAL - Copyright (C) 2013 STMicroelectronics
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for a generic SPC564Axx proto board.
- */
-
-/*
- * Board identifiers.
- */
-#define BOARD_GENERIC_SPC564A
-#define BOARD_NAME "Generic SPC564Axx"
-
-/*
- * Board frequencies.
- */
-#if !defined(SPC5_XOSC_CLK)
-#define SPC5_XOSC_CLK 8000000
-#endif
-
-/*
- * I/O definitions.
- */
-#define P5_ESCI_A_TX 9
-#define P5_ESCI_A_RX 10
-
-#define P11_BUTTON1 3
-#define P11_BUTTON2 5
-#define P11_BUTTON3 7
-#define P11_BUTTON4 9
-
-#define P11_LED1 12
-#define P11_LED2 13
-#define P11_LED3 14
-#define P11_LED4 15
-
-/*
- * Support macros.
- */
-#define PCR(port, pin) (((port) * 16) + (pin))
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
diff --git a/boards/ST_EVB_SPC564A/board.mk b/boards/ST_EVB_SPC564A/board.mk deleted file mode 100644 index 1dc4a1117..000000000 --- a/boards/ST_EVB_SPC564A/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files.
-BOARDSRC = ${CHIBIOS}/boards/ST_EVB_SPC564A/board.c
-
-# Required include directories
-BOARDINC = ${CHIBIOS}/boards/ST_EVB_SPC564A
diff --git a/boards/ST_EVB_SPC56EL/board.c b/boards/ST_EVB_SPC56EL/board.c deleted file mode 100644 index 7373f595d..000000000 --- a/boards/ST_EVB_SPC56EL/board.c +++ /dev/null @@ -1,68 +0,0 @@ -/*
- SPC5 HAL - Copyright (C) 2013 STMicroelectronics
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-/* Initial setup of all defined pads, the list is terminated by a {-1, 0, 0}.*/
-static const spc_siu_init_t spc_siu_init[] = {
- {PCR(PORT_B, PB_LIN0_TDX), PAL_HIGH, PAL_MODE_OUTPUT_ALTERNATE(1)},
- {PCR(PORT_B, PB_LIN0_RDX), PAL_HIGH, PAL_MODE_INPUT},
- {PCR(PORT_D, PD_BUTTON1), PAL_LOW, PAL_MODE_INPUT},
- {PCR(PORT_D, PD_BUTTON2), PAL_LOW, PAL_MODE_INPUT},
- {PCR(PORT_D, PD_BUTTON3), PAL_LOW, PAL_MODE_INPUT},
- {PCR(PORT_D, PD_BUTTON4), PAL_LOW, PAL_MODE_INPUT},
- {PCR(PORT_D, PD_LED1), PAL_HIGH, PAL_MODE_OUTPUT_PUSHPULL},
- {PCR(PORT_D, PD_LED2), PAL_HIGH, PAL_MODE_OUTPUT_PUSHPULL},
- {PCR(PORT_D, PD_LED3), PAL_HIGH, PAL_MODE_OUTPUT_PUSHPULL},
- {PCR(PORT_D, PD_LED4), PAL_HIGH, PAL_MODE_OUTPUT_PUSHPULL},
- {-1, 0, 0}
-};
-
-/* Initialization array for the PSMI registers.*/
-static const uint8_t spc_padsels_init[SPC5_SIUL_NUM_PADSELS] = {
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
-};
-
-/**
- * @brief PAL setup.
- */
-const PALConfig pal_default_config = {
- PAL_MODE_UNCONNECTED, /* Default mode for all undefined pads. */
- spc_siu_init,
- spc_padsels_init
-};
-#endif
-
-/*
- * Early initialization code.
- * This initialization must be performed just after stack setup and before
- * any other initialization.
- */
-void __early_init(void) {
-
- spc_early_init();
-}
-
-/*
- * Board-specific initialization code.
- */
-void boardInit(void) {
-
-}
diff --git a/boards/ST_EVB_SPC56EL/board.h b/boards/ST_EVB_SPC56EL/board.h deleted file mode 100644 index 5c64e99bb..000000000 --- a/boards/ST_EVB_SPC56EL/board.h +++ /dev/null @@ -1,68 +0,0 @@ -/*
- SPC5 HAL - Copyright (C) 2013 STMicroelectronics
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for a generic SPC560Pxx proto board.
- */
-
-/*
- * Board identifiers.
- */
-#define BOARD_GENERIC_SPC56EL
-#define BOARD_NAME "Generic SPC56ELxx"
-
-/*
- * Board frequencies.
- */
-#if !defined(SPC5_XOSC_CLK)
-#define SPC5_XOSC_CLK 40000000
-#endif
-
-/*
- * I/O definitions.
- */
-#define PB_LIN0_TDX 2
-#define PB_LIN0_RDX 3
-
-#define PD_BUTTON1 0
-#define PD_BUTTON2 1
-#define PD_BUTTON3 2
-#define PD_BUTTON4 3
-
-#define PD_LED1 4
-#define PD_LED2 5
-#define PD_LED3 6
-#define PD_LED4 7
-
-/*
- * Support macros.
- */
-#define PCR(port, pin) (((port) * 16) + (pin))
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
diff --git a/boards/ST_EVB_SPC56EL/board.mk b/boards/ST_EVB_SPC56EL/board.mk deleted file mode 100644 index 8e5c03bce..000000000 --- a/boards/ST_EVB_SPC56EL/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files.
-BOARDSRC = ${CHIBIOS}/boards/ST_EVB_SPC56EL/board.c
-
-# Required include directories
-BOARDINC = ${CHIBIOS}/boards/ST_EVB_SPC56EL
diff --git a/boards/ST_STM3210C_EVAL/board.c b/boards/ST_STM3210C_EVAL/board.c deleted file mode 100644 index 030d2f9ae..000000000 --- a/boards/ST_STM3210C_EVAL/board.c +++ /dev/null @@ -1,55 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-/**
- * @brief PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- * This variable is used by the HAL when initializing the PAL driver.
- */
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-const PALConfig pal_default_config =
-{
- {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH},
- {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH},
- {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH},
- {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH},
- {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH},
-};
-#endif
-
-/*
- * Early initialization code.
- * This initialization must be performed just after stack setup and before
- * any other initialization.
- */
-void __early_init(void) {
-
- stm32_clock_init();
-}
-
-/*
- * Board-specific initialization code.
- */
-void boardInit(void) {
-
- /*
- * Remap USART2 to the PD5/PD6 pins.
- */
- AFIO->MAPR |= AFIO_MAPR_USART2_REMAP;
-}
diff --git a/boards/ST_STM3210C_EVAL/board.h b/boards/ST_STM3210C_EVAL/board.h deleted file mode 100644 index 2193179b8..000000000 --- a/boards/ST_STM3210C_EVAL/board.h +++ /dev/null @@ -1,128 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for the STMicroelectronics STM3210C-EVAL evaluation board.
- */
-
-#define GPIOD_LED1 7
-#define GPIOD_LED2 13
-#define GPIOD_LED3 3
-#define GPIOD_LED4 4
-
-/*
- * Board identifier.
- */
-#define BOARD_ST_STM3210C_EVAL
-#define BOARD_NAME "ST STM3210C-EVAL"
-
-/*
- * Board frequencies.
- */
-#define STM32_LSECLK 32768
-#define STM32_HSECLK 25000000
-
-/*
- * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
- */
-#define STM32F10X_CL
-
-/*
- * IO pins assignments.
- * *********************TO BE COMPLETED*********************
- */
-
-/*
- * I/O ports initial setup, this configuration is established soon after reset
- * in the initialization code.
- *
- * The digits have the following meaning:
- * 0 - Analog input.
- * 1 - Push Pull output 10MHz.
- * 2 - Push Pull output 2MHz.
- * 3 - Push Pull output 50MHz.
- * 4 - Digital input.
- * 5 - Open Drain output 10MHz.
- * 6 - Open Drain output 2MHz.
- * 7 - Open Drain output 50MHz.
- * 8 - Digital input with PullUp or PullDown resistor depending on ODR.
- * 9 - Alternate Push Pull output 10MHz.
- * A - Alternate Push Pull output 2MHz.
- * B - Alternate Push Pull output 50MHz.
- * C - Reserved.
- * D - Alternate Open Drain output 10MHz.
- * E - Alternate Open Drain output 2MHz.
- * F - Alternate Open Drain output 50MHz.
- * Please refer to the STM32 Reference Manual for details.
- */
-
-/*
- * Port A setup.
- * Everything input except:
- */
-#define VAL_GPIOACRL 0x44444444 /* PA7...PA0 */
-#define VAL_GPIOACRH 0x44444444 /* PA15...PA8 */
-#define VAL_GPIOAODR 0xFFFFFFFF
-
-/*
- * Port B setup.
- * Everything input except:
- */
-#define VAL_GPIOBCRL 0x44444444 /* PB7...PB0 */
-#define VAL_GPIOBCRH 0x44444444 /* PB15...PB8 */
-#define VAL_GPIOBODR 0xFFFFFFFF
-
-/*
- * Port C setup.
- * Everything input except:
- */
-#define VAL_GPIOCCRL 0x44444444 /* PC7...PC0 */
-#define VAL_GPIOCCRH 0x44444444 /* PC15...PC8 */
-#define VAL_GPIOCODR 0xFFFFFFFF
-
-/*
- * Port D setup.
- * Everything input except:
- * PD5 - USART2TX (remapped) AF PP Output
- * PD6 - USART2RX (remapped) Digital Input
- * PD7 - LED (LD1) PP Output
- */
-#define VAL_GPIODCRL 0x34B33444 /* PD7...PD0 */
-#define VAL_GPIODCRH 0x44344444 /* PD15...PD8 */
-#define VAL_GPIODODR 0x0000DF67
-
-/*
- * Port E setup.
- * Everything input except:
- */
-#define VAL_GPIOECRL 0x44444444 /* PE7...PE0 */
-#define VAL_GPIOECRH 0x44344444 /* PE15...PE8 */
-#define VAL_GPIOEODR 0xFFFFFFFF
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
diff --git a/boards/ST_STM3210C_EVAL/board.mk b/boards/ST_STM3210C_EVAL/board.mk deleted file mode 100644 index eaa17162b..000000000 --- a/boards/ST_STM3210C_EVAL/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files.
-BOARDSRC = ${CHIBIOS}/boards/ST_STM3210C_EVAL/board.c
-
-# Required include directories
-BOARDINC = ${CHIBIOS}/boards/ST_STM3210C_EVAL
diff --git a/boards/ST_STM3210E_EVAL/board.c b/boards/ST_STM3210E_EVAL/board.c deleted file mode 100644 index 95f58e3b0..000000000 --- a/boards/ST_STM3210E_EVAL/board.c +++ /dev/null @@ -1,68 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-/**
- * @brief PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- * This variable is used by the HAL when initializing the PAL driver.
- */
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-const PALConfig pal_default_config =
-{
- {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH},
- {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH},
- {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH},
- {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH},
- {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH},
- {VAL_GPIOFODR, VAL_GPIOFCRL, VAL_GPIOFCRH},
- {VAL_GPIOGODR, VAL_GPIOGCRL, VAL_GPIOGCRH},
-};
-#endif
-
-/*
- * Early initialization code.
- * This initialization must be performed just after stack setup and before
- * any other initialization.
- */
-void __early_init(void) {
-
- stm32_clock_init();
-}
-
-#if HAL_USE_SDC
-/* Board-related functions related to the SDC driver.*/
-bool_t sdc_lld_is_card_inserted(SDCDriver *sdcp) {
-
- (void)sdcp;
- return !palReadPad(GPIOF, GPIOF_SD_DETECT);
-}
-
-bool_t sdc_lld_is_write_protected(SDCDriver *sdcp) {
-
- (void)sdcp;
- return FALSE;
-}
-#endif
-
-/*
- * Board-specific initialization code.
- */
-void boardInit(void) {
-
-}
diff --git a/boards/ST_STM3210E_EVAL/board.h b/boards/ST_STM3210E_EVAL/board.h deleted file mode 100644 index 739b3e089..000000000 --- a/boards/ST_STM3210E_EVAL/board.h +++ /dev/null @@ -1,251 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for the STMicroelectronics STM3210E-EVAL evaluation board.
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_ST_STM3210E_EVAL
-#define BOARD_NAME "ST STM3210E-EVAL"
-
-/*
- * Board frequencies.
- */
-#define STM32_LSECLK 32768
-#define STM32_HSECLK 8000000
-
-/*
- * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
- * Note: Older board revisions should define STM32F10X_HD instead, please
- * verify the STM32 model mounted on your board. The change also
- * affects your linker script.
- */
-#define STM32F10X_XL
-
-/*
- * IO pins assignments.
- */
-#define GPIOA_WAKEUP_BUTTON 0
-
-#define GPIOB_SC_3V_5V 0
-#define GPIOB_SPI1_CS 2
-#define GPIOB_TEMP_INT 5
-#define GPIOB_USB_DISC 14
-
-#define GPIOC_SC_CMDVCC 6
-#define GPIOC_SC_OFF 7
-#define GPIOC_TAMPER_BUTTON 13
-
-#define GPIOD_JOY_DOWN 3
-
-#define GPIOF_LED1 6
-#define GPIOF_LED2 7
-#define GPIOF_LED3 8
-#define GPIOF_LED4 9
-#define GPIOF_SD_DETECT 11
-
-#define GPIOG_JOY_SEL 7
-#define GPIOG_USER_BUTTON 8
-#define GPIOG_JOY_RIGHT 13
-#define GPIOG_JOY_LEFT 14
-#define GPIOG_JOY_UP 15
-
-/*
- * I/O ports initial setup, this configuration is established soon after reset
- * in the initialization code.
- * Please refer to the STM32 Reference Manual for details.
- */
-#define PIN_ANALOG(n) (0 << (((n) & 7) * 4))
-#define PIN_OUTPUT_PP_10(n) (1 << (((n) & 7) * 4))
-#define PIN_OUTPUT_PP_2(n) (2 << (((n) & 7) * 4))
-#define PIN_OUTPUT_PP_50(n) (3 << (((n) & 7) * 4))
-#define PIN_INPUT(n) (4 << (((n) & 7) * 4))
-#define PIN_OUTPUT_OD_10(n) (5 << (((n) & 7) * 4))
-#define PIN_OUTPUT_OD_2(n) (6 << (((n) & 7) * 4))
-#define PIN_OUTPUT_OD_50(n) (7 << (((n) & 7) * 4))
-#define PIN_INPUT_PUD(n) (8 << (((n) & 7) * 4))
-#define PIN_ALTERNATE_PP_10(n) (9 << (((n) & 7) * 4))
-#define PIN_ALTERNATE_PP_2(n) (10 << (((n) & 7) * 4))
-#define PIN_ALTERNATE_PP_50(n) (11 << (((n) & 7) * 4))
-#define PIN_ALTERNATE_OD_10(n) (13 << (((n) & 7) * 4))
-#define PIN_ALTERNATE_OD_2(n) (14 << (((n) & 7) * 4))
-#define PIN_ALTERNATE_OD_50(n) (15 << (((n) & 7) * 4))
-#define PIN_UNDEFINED(n) PIN_INPUT_PUD(n)
-
-/*
- * Port A setup.
- */
-#define VAL_GPIOACRL (PIN_INPUT(0) | /* Wakeup Button. */ \
- PIN_OUTPUT_PP_50(1) | /* USART2_RTS. */ \
- PIN_ALTERNATE_PP_50(2) | /* USART2_TX. */ \
- PIN_INPUT(3) | /* USART2_RX. */ \
- PIN_UNDEFINED(4) | \
- PIN_ALTERNATE_PP_50(5) | /* SPI1_SCK. */ \
- PIN_INPUT(6) | /* SPI1_MISO. */ \
- PIN_ALTERNATE_PP_50(7)) /* SPI1_MOSI. */
-#define VAL_GPIOACRH (PIN_ALTERNATE_PP_50(8) | /* MCO. */ \
- PIN_ALTERNATE_PP_50(9) | /* USART1_TX. */ \
- PIN_INPUT(10) | /* USART1_RX. */ \
- PIN_INPUT_PUD(11) | /* USB_DM. */ \
- PIN_INPUT_PUD(12) | /* USB_DP. */ \
- PIN_INPUT(13) | /* TMS. */ \
- PIN_INPUT(14) | /* TCK. */ \
- PIN_INPUT(15)) /* TDI. */
-#define VAL_GPIOAODR 0xFFFFFFFF
-
-/*
- * Port B setup.
- */
-#define VAL_GPIOBCRL (PIN_OUTPUT_PP_50(0) | /* SmartCard_3/5V. */ \
- PIN_INPUT_PUD(1) | /* Unconnected. */ \
- PIN_OUTPUT_PP_50(2) | /* SPI1_CS. */ \
- PIN_INPUT(3) | /* TDO. */ \
- PIN_INPUT(4) | /* TRST. */ \
- PIN_INPUT_PUD(5) | /* Temp.Sensor INT. */ \
- PIN_ALTERNATE_OD_50(6) | /* I2C1_SCK. */ \
- PIN_ALTERNATE_OD_50(7)) /* I2C1_SDA. */
-#define VAL_GPIOBCRH (PIN_INPUT(8) | /* CAN_RX. */ \
- PIN_ALTERNATE_PP_50(9) | /* CAN_TX. */ \
- PIN_ALTERNATE_OD_50(10)| /* SmartCard IO. */ \
- PIN_OUTPUT_PP_50(11) | /* SmartCard RST. */ \
- PIN_ALTERNATE_PP_50(12)| /* SmartCard CLK. */ \
- PIN_UNDEFINED(13) | \
- PIN_OUTPUT_PP_50(14) | /* USB disconnect. */ \
- PIN_UNDEFINED(15))
-#define VAL_GPIOBODR 0xFFFFFFFF
-
-/*
- * Port C setup.
- */
-#define VAL_GPIOCCRL (PIN_UNDEFINED(0) | \
- PIN_UNDEFINED(1) | \
- PIN_UNDEFINED(2) | \
- PIN_UNDEFINED(3) | \
- PIN_ANALOG(4) | /* Potentiometer. */ \
- PIN_UNDEFINED(5) | \
- PIN_OUTPUT_PP_50(6) | /* SmartCard CMDVCC. */ \
- PIN_INPUT(7)) /* SmartCard OFF. */
-#define VAL_GPIOCCRH (PIN_ALTERNATE_PP_50(8) | /* SDIO D0. */ \
- PIN_ALTERNATE_PP_50(9) | /* SDIO D1. */ \
- PIN_ALTERNATE_PP_50(10)| /* SDIO D2. */ \
- PIN_ALTERNATE_PP_50(11)| /* SDIO D3. */ \
- PIN_ALTERNATE_PP_50(12)| /* SDIO CLK. */ \
- PIN_INPUT(13) | /* Tamper Button. */ \
- PIN_INPUT(14) | /* OSC IN. */ \
- PIN_INPUT(15)) /* OSC OUT. */
-#define VAL_GPIOCODR 0xFFFFFFFF
-
-/*
- * Port D setup
- */
-#define VAL_GPIODCRL (PIN_ALTERNATE_PP_50(0) | /* FSMC_D2. */ \
- PIN_ALTERNATE_PP_50(1) | /* FSMC_D3. */ \
- PIN_ALTERNATE_PP_50(2) | /* SDIO CMD. */ \
- PIN_INPUT(3) | /* Joy Down. */ \
- PIN_ALTERNATE_PP_50(4) | /* FSMC_NOE. */ \
- PIN_ALTERNATE_PP_50(5) | /* FSMC_NWE. */ \
- PIN_INPUT(6) | /* FSMC_NWAIT. */ \
- PIN_ALTERNATE_PP_50(7)) /* FSMC_NCE2. */
-#define VAL_GPIODCRH (PIN_ALTERNATE_PP_50(8) | /* FSMC_D13. */ \
- PIN_ALTERNATE_PP_50(9) | /* FSMC_D14. */ \
- PIN_ALTERNATE_PP_50(10)| /* FSMC_D15. */ \
- PIN_ALTERNATE_PP_50(11)| /* FSMC_A16. */ \
- PIN_ALTERNATE_PP_50(12)| /* FSMC_A17. */ \
- PIN_ALTERNATE_PP_50(13)| /* FSMC_A18. */ \
- PIN_ALTERNATE_PP_50(14)| /* FSMC_D0. */ \
- PIN_ALTERNATE_PP_50(15)) /* FSMC_D1. */
-#define VAL_GPIODODR 0xFFFFFFFF
-
-/*
- * Port E setup.
- */
-#define VAL_GPIOECRL (PIN_ALTERNATE_PP_50(0) | /* FSMC_NBL0. */ \
- PIN_ALTERNATE_PP_50(1) | /* FSMC_NBL1. */ \
- PIN_ALTERNATE_PP_50(2) | /* FSMC_A23. */ \
- PIN_ALTERNATE_PP_50(3) | /* FSMC_A19. */ \
- PIN_ALTERNATE_PP_50(4) | /* FSMC_A20. */ \
- PIN_ALTERNATE_PP_50(5) | /* FSMC_A21. */ \
- PIN_ALTERNATE_PP_50(6) | /* FSMC_A22. */ \
- PIN_ALTERNATE_PP_50(7)) /* FSMC_D4. */
-#define VAL_GPIOECRH (PIN_ALTERNATE_PP_50(8) | /* FSMC_D5. */ \
- PIN_ALTERNATE_PP_50(9) | /* FSMC_D6. */ \
- PIN_ALTERNATE_PP_50(10)| /* FSMC_D7. */ \
- PIN_ALTERNATE_PP_50(11)| /* FSMC_D8. */ \
- PIN_ALTERNATE_PP_50(12)| /* FSMC_D9. */ \
- PIN_ALTERNATE_PP_50(13)| /* FSMC_D10. */ \
- PIN_ALTERNATE_PP_50(14)| /* FSMC_D11. */ \
- PIN_ALTERNATE_PP_50(15)) /* FSMC_D12. */
-#define VAL_GPIOEODR 0xFFFFFFFF
-
-/*
- * Port F setup.
- */
-#define VAL_GPIOFCRL (PIN_ALTERNATE_PP_50(0) | /* FSMC_A0. */ \
- PIN_ALTERNATE_PP_50(1) | /* FSMC_A1. */ \
- PIN_ALTERNATE_PP_50(2) | /* FSMC_A2. */ \
- PIN_ALTERNATE_PP_50(3) | /* FSMC_A3. */ \
- PIN_ALTERNATE_PP_50(4) | /* FSMC_A4. */ \
- PIN_ALTERNATE_PP_50(5) | /* FSMC_A5. */ \
- PIN_OUTPUT_PP_50(6) | /* LED1. */ \
- PIN_OUTPUT_PP_50(7)) /* LED2. */
-#define VAL_GPIOFCRH (PIN_OUTPUT_PP_50(8) | /* LED3. */ \
- PIN_OUTPUT_PP_50(9) | /* LED4. */ \
- PIN_UNDEFINED(10) | \
- PIN_INPUT_PUD(11) | /* SDCard detect. */ \
- PIN_ALTERNATE_PP_50(12)| /* FSMC_A6. */ \
- PIN_ALTERNATE_PP_50(13)| /* FSMC_A7. */ \
- PIN_ALTERNATE_PP_50(14)| /* FSMC_A8. */ \
- PIN_ALTERNATE_PP_50(15)) /* FSMC_A9. */
-#define VAL_GPIOFODR 0xFFFFFC3F
-
-/*
- * Port G setup.
- */
-#define VAL_GPIOGCRL (PIN_ALTERNATE_PP_50(0) | /* FSMC_A10. */ \
- PIN_ALTERNATE_PP_50(1) | /* FSMC_A11. */ \
- PIN_ALTERNATE_PP_50(2) | /* FSMC_A12. */ \
- PIN_ALTERNATE_PP_50(3) | /* FSMC_A13. */ \
- PIN_ALTERNATE_PP_50(4) | /* FSMC_A14. */ \
- PIN_ALTERNATE_PP_50(5) | /* FSMC_A15. */ \
- PIN_INPUT(6) | /* FSMC_INT2. */ \
- PIN_INPUT(7)) /* Joy Select. */
-#define VAL_GPIOGCRH (PIN_INPUT(8) | /* User Button. */ \
- PIN_ALTERNATE_PP_50(9) | /* FSMC_NE2. */ \
- PIN_ALTERNATE_PP_50(10)| /* FSMC_NE3. */ \
- PIN_OUTPUT_PP_50(11) | /* Audio PDN. */ \
- PIN_ALTERNATE_PP_50(12)| /* FSMC_NE4. */ \
- PIN_INPUT(13) | /* Joy Right. */ \
- PIN_INPUT(14) | /* Joy Left. */ \
- PIN_INPUT(15)) /* Joy Up. */
-#define VAL_GPIOGODR 0xFFFFF7FF
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
diff --git a/boards/ST_STM3210E_EVAL/board.mk b/boards/ST_STM3210E_EVAL/board.mk deleted file mode 100644 index edd0baf21..000000000 --- a/boards/ST_STM3210E_EVAL/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files.
-BOARDSRC = ${CHIBIOS}/boards/ST_STM3210E_EVAL/board.c
-
-# Required include directories
-BOARDINC = ${CHIBIOS}/boards/ST_STM3210E_EVAL
diff --git a/boards/ST_STM3220G_EVAL/board.c b/boards/ST_STM3220G_EVAL/board.c deleted file mode 100644 index c78a97b8d..000000000 --- a/boards/ST_STM3220G_EVAL/board.c +++ /dev/null @@ -1,54 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-/**
- * @brief PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- * This variable is used by the HAL when initializing the PAL driver.
- */
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-const PALConfig pal_default_config =
-{
- {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH},
- {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR, VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH},
- {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR, VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH},
- {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR, VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH},
- {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR, VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH},
- {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR, VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH},
- {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR, VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH},
- {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR, VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH},
- {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH}
-};
-#endif
-
-/*
- * Early initialization code.
- * This initialization must be performed just after stack setup and before
- * any other initialization.
- */
-void __early_init(void) {
-
- stm32_clock_init();
-}
-
-/*
- * Board-specific initialization code.
- */
-void boardInit(void) {
-}
diff --git a/boards/ST_STM3220G_EVAL/board.h b/boards/ST_STM3220G_EVAL/board.h deleted file mode 100644 index 07cfc5dea..000000000 --- a/boards/ST_STM3220G_EVAL/board.h +++ /dev/null @@ -1,226 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for STMicroelectronics STM3220G-EVAL board.
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_ST_STM3220G_EVAL
-#define BOARD_NAME "ST STM3220G-EVAL"
-
-/*
- * Board frequencies.
- * NOTE: The HSE crystal is not fitted by default on the board.
- */
-#define STM32_LSECLK 32768
-#define STM32_HSECLK 25000000
-
-/*
- * MCU type as defined in the ST header file stm32f2xx.h.
- */
-#define STM32F2XX
-
-/*
- * IO pins assignments.
- */
-
-#define GPIOA_WAKEUP_BUTTON 0
-
-#define GPIOB_ETHER_INT 14
-#define GPIOB_NAND_INT 15
-
-#define GPIOC_TAMPER_BUTTON 0
-#define GPIOC_LED4 7
-
-#define GPIOF_POT 9
-
-#define GPIOG_LED1 6
-#define GPIOG_LED2 8
-#define GPIOG_USER_BUTTON 15
-
-#define GPIOH_EXPANDER_INT 12
-#define GPIOH_SD_DETECT 13
-
-#define GPIOI_LED3 9
-
-/*
- * I/O ports initial setup, this configuration is established soon after reset
- * in the initialization code.
- * Please refer to the STM32 Reference Manual for details.
- */
-#define PIN_MODE_INPUT(n) (0 << ((n) * 2))
-#define PIN_MODE_OUTPUT(n) (1 << ((n) * 2))
-#define PIN_MODE_ALTERNATE(n) (2 << ((n) * 2))
-#define PIN_MODE_ANALOG(n) (3 << ((n) * 2))
-#define PIN_OTYPE_PUSHPULL(n) (0 << (n))
-#define PIN_OTYPE_OPENDRAIN(n) (1 << (n))
-#define PIN_OSPEED_2M(n) (0 << ((n) * 2))
-#define PIN_OSPEED_25M(n) (1 << ((n) * 2))
-#define PIN_OSPEED_50M(n) (2 << ((n) * 2))
-#define PIN_OSPEED_100M(n) (3 << ((n) * 2))
-#define PIN_PUDR_FLOATING(n) (0 << ((n) * 2))
-#define PIN_PUDR_PULLUP(n) (1 << ((n) * 2))
-#define PIN_PUDR_PULLDOWN(n) (2 << ((n) * 2))
-#define PIN_AFIO_AF(n, v) ((v##U) << ((n % 8) * 4))
-
-/*
- * Port A setup.
- * All input with pull-up except:
- * PA8 - MCO 1 (alternate 0).
- * PA13 - JTMS/SWDAT (alternate 0).
- * PA14 - JTCK/SWCLK (alternate 0).
- * PA15 - JTDI (alternate 0).
- */
-#define VAL_GPIOA_MODER (PIN_MODE_ALTERNATE(8) | \
- PIN_MODE_ALTERNATE(13) | \
- PIN_MODE_ALTERNATE(14) | \
- PIN_MODE_ALTERNATE(15))
-#define VAL_GPIOA_OTYPER 0x00000000
-#define VAL_GPIOA_OSPEEDR 0xFFFFFFFF
-#define VAL_GPIOA_PUPDR (PIN_PUDR_FLOATING(13) | \
- PIN_PUDR_FLOATING(14) | \
- PIN_PUDR_FLOATING(15))
-#define VAL_GPIOA_ODR 0xFFFFFFFF
-#define VAL_GPIOA_AFRL 0x00000000
-#define VAL_GPIOA_AFRH 0x00000000
-
-/*
- * Port B setup.
- * All input with pull-up except:
- * PB3 - JTDO (alternate 0).
- * PB4 - JNTRST (alternate 0).
- */
-#define VAL_GPIOB_MODER (PIN_MODE_ALTERNATE(3) | \
- PIN_MODE_ALTERNATE(4))
-#define VAL_GPIOB_OTYPER 0x00000000
-#define VAL_GPIOB_OSPEEDR 0xFFFFFFFF
-#define VAL_GPIOB_PUPDR (~(PIN_PUDR_FLOATING(3) | \
- PIN_PUDR_FLOATING(4)))
-#define VAL_GPIOB_ODR 0xFFFFFFFF
-#define VAL_GPIOB_AFRL 0x00000000
-#define VAL_GPIOB_AFRH 0x00000000
-
-/*
- * Port C setup.
- * All input with pull-up except:
- * PC9 - MCO2 (alternate 0).
- * PC10 - USART3_TX (alternate 7).
- * PC11 - USART3_RX (alternate 7).
- * PC14 - OSC32_INT (input floating).
- * PC15 - OSC32_OUT (input floating).
- */
-#define VAL_GPIOC_MODER (PIN_MODE_ALTERNATE(9) | \
- PIN_MODE_ALTERNATE(10) | \
- PIN_MODE_ALTERNATE(11))
-#define VAL_GPIOC_OTYPER 0x00000000
-#define VAL_GPIOC_OSPEEDR 0xFFFFFFFF
-#define VAL_GPIOC_PUPDR (~(PIN_PUDR_PULLUP(11) | \
- PIN_PUDR_FLOATING(14) | \
- PIN_PUDR_FLOATING(15)))
-#define VAL_GPIOC_ODR 0xFFFFFFFF
-#define VAL_GPIOC_AFRL 0x00000000
-#define VAL_GPIOC_AFRH (PIN_AFIO_AF(7, 10) | \
- PIN_AFIO_AF(7, 11))
-
-/*
- * Port D setup.
- * All input with pull-up.
- */
-#define VAL_GPIOD_MODER 0x00000000
-#define VAL_GPIOD_OTYPER 0x00000000
-#define VAL_GPIOD_OSPEEDR 0xFFFFFFFF
-#define VAL_GPIOD_PUPDR 0xFFFFFFFF
-#define VAL_GPIOD_ODR 0xFFFFFFFF
-#define VAL_GPIOD_AFRL 0x00000000
-#define VAL_GPIOD_AFRH 0x00000000
-
-/*
- * Port E setup.
- * All input with pull-up.
- */
-#define VAL_GPIOE_MODER 0x00000000
-#define VAL_GPIOE_OTYPER 0x00000000
-#define VAL_GPIOE_OSPEEDR 0xFFFFFFFF
-#define VAL_GPIOE_PUPDR 0xFFFFFFFF
-#define VAL_GPIOE_ODR 0xFFFFFFFF
-#define VAL_GPIOE_AFRL 0x00000000
-#define VAL_GPIOE_AFRH 0x00000000
-
-/*
- * Port F setup.
- * All input with pull-up.
- */
-#define VAL_GPIOF_MODER 0x00000000
-#define VAL_GPIOF_OTYPER 0x00000000
-#define VAL_GPIOF_OSPEEDR 0xFFFFFFFF
-#define VAL_GPIOF_PUPDR 0xFFFFFFFF
-#define VAL_GPIOF_ODR 0xFFFFFFFF
-#define VAL_GPIOF_AFRL 0x00000000
-#define VAL_GPIOF_AFRH 0x00000000
-
-/*
- * Port G setup.
- * All input with pull-up.
- */
-#define VAL_GPIOG_MODER (PIN_MODE_OUTPUT(GPIOG_LED1))
-#define VAL_GPIOG_OTYPER 0x00000000
-#define VAL_GPIOG_OSPEEDR 0xFFFFFFFF
-#define VAL_GPIOG_PUPDR (~(PIN_PUDR_FLOATING(GPIOG_LED1)))
-#define VAL_GPIOG_ODR 0xFFFFFFBF
-#define VAL_GPIOG_AFRL 0x00000000
-#define VAL_GPIOG_AFRH 0x00000000
-
-/*
- * Port H setup.
- * All input with pull-up.
- */
-#define VAL_GPIOH_MODER 0x00000000
-#define VAL_GPIOH_OTYPER 0x00000000
-#define VAL_GPIOH_OSPEEDR 0xFFFFFFFF
-#define VAL_GPIOH_PUPDR 0xFFFFFFFF
-#define VAL_GPIOH_ODR 0xFFFFFFFF
-#define VAL_GPIOH_AFRL 0x00000000
-#define VAL_GPIOH_AFRH 0x00000000
-
-/*
- * Port I setup.
- * All input with pull-up.
- */
-#define VAL_GPIOI_MODER 0x00000000
-#define VAL_GPIOI_OTYPER 0x00000000
-#define VAL_GPIOI_OSPEEDR 0xFFFFFFFF
-#define VAL_GPIOI_PUPDR 0xFFFFFFFF
-#define VAL_GPIOI_ODR 0xFFFFFFFF
-#define VAL_GPIOI_AFRL 0x00000000
-#define VAL_GPIOI_AFRH 0x00000000
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
diff --git a/boards/ST_STM3220G_EVAL/board.mk b/boards/ST_STM3220G_EVAL/board.mk deleted file mode 100644 index 3121594a6..000000000 --- a/boards/ST_STM3220G_EVAL/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files.
-BOARDSRC = ${CHIBIOS}/boards/ST_STM3220G_EVAL/board.c
-
-# Required include directories
-BOARDINC = ${CHIBIOS}/boards/ST_STM3220G_EVAL
diff --git a/boards/ST_STM32373C_EVAL/board.c b/boards/ST_STM32373C_EVAL/board.c deleted file mode 100644 index baafd6550..000000000 --- a/boards/ST_STM32373C_EVAL/board.c +++ /dev/null @@ -1,102 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-/**
- * @brief PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- * This variable is used by the HAL when initializing the PAL driver.
- */
-const PALConfig pal_default_config =
-{
- {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
- VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH},
- {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
- VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH},
- {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
- VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH},
- {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
- VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH},
- {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
- VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH},
- {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
- VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH}
-};
-#endif
-
-/**
- * @brief Early initialization code.
- * @details This initialization must be performed just after stack setup
- * and before any other initialization.
- */
-void __early_init(void) {
-
- stm32_clock_init();
-}
-
-#if HAL_USE_SDC || defined(__DOXYGEN__)
-/**
- * @brief SDC card detection.
- */
-bool_t sdc_lld_is_card_inserted(SDCDriver *sdcp) {
-
- (void)sdcp;
- /* TODO: Fill the implementation.*/
- return TRUE;
-}
-
-/**
- * @brief SDC card write protection detection.
- */
-bool_t sdc_lld_is_write_protected(SDCDriver *sdcp) {
-
- (void)sdcp;
- /* TODO: Fill the implementation.*/
- return FALSE;
-}
-#endif /* HAL_USE_SDC */
-
-#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
-/**
- * @brief MMC_SPI card detection.
- */
-bool_t mmc_lld_is_card_inserted(MMCDriver *mmcp) {
-
- (void)mmcp;
- /* TODO: Fill the implementation.*/
- return TRUE;
-}
-
-/**
- * @brief MMC_SPI card write protection detection.
- */
-bool_t mmc_lld_is_write_protected(MMCDriver *mmcp) {
-
- (void)mmcp;
- /* TODO: Fill the implementation.*/
- return FALSE;
-}
-#endif
-
-/**
- * @brief Board-specific initialization code.
- * @todo Add your board-specific code, if any.
- */
-void boardInit(void) {
-}
diff --git a/boards/ST_STM32373C_EVAL/board.h b/boards/ST_STM32373C_EVAL/board.h deleted file mode 100644 index 13676e7e6..000000000 --- a/boards/ST_STM32373C_EVAL/board.h +++ /dev/null @@ -1,888 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for STMicroelectronics STM32373C-EVAL board.
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_ST_STM32373C_EVAL
-#define BOARD_NAME "STMicroelectronics STM32373C-EVAL"
-
-/*
- * Board oscillators-related settings.
- */
-#if !defined(STM32_LSECLK)
-#define STM32_LSECLK 32768
-#endif
-
-#define STM32_LSEDRV (3 << 3)
-
-#if !defined(STM32_HSECLK)
-#define STM32_HSECLK 8000000
-#endif
-
-/*
- * MCU type as defined in the ST header.
- */
-#define STM32F37X
-
-/*
- * IO pins assignments.
- */
-#define GPIOA_WKUP_BUTTON 0
-#define GPIOA_LDR_OUT 1
-#define GPIOA_KEY_BUTTON 2
-#define GPIOA_PIN3 3
-#define GPIOA_PIN4 4
-#define GPIOA_PIN5 5
-#define GPIOA_PIN6 6
-#define GPIOA_COMP2_OUT 7
-#define GPIOA_I2C2_SMB 8
-#define GPIOA_I2C2_SCL 9
-#define GPIOA_I2C2_SDA 10
-#define GPIOA_USB_DM 11
-#define GPIOA_USB_DP 12
-#define GPIOA_SWDIO 13
-#define GPIOA_SWCLK 14
-#define GPIOA_JTDI 15
-
-#define GPIOB_MIC_IN 0
-#define GPIOB_ADC_POT_IN 1
-#define GPIOB_PIN2 2
-#define GPIOB_SWO 3
-#define GPIOB_JTRST 4
-#define GPIOB_PIN5 5
-#define GPIOB_I2C1_SCL 6
-#define GPIOB_I2C1_SDA 7
-#define GPIOB_PIN8 8
-#define GPIOB_PIN9 9
-#define GPIOB_PIN10 10
-#define GPIOB_PIN11 11
-#define GPIOB_PIN12 12
-#define GPIOB_PIN13 13
-#define GPIOB_PIN14 14
-#define GPIOB_PIN15 15
-
-#define GPIOC_LED1 0
-#define GPIOC_LED2 1
-#define GPIOC_LED3 2
-#define GPIOC_LED4 3
-#define GPIOC_PIN4 4
-#define GPIOC_USB_DISCONNECT 5
-#define GPIOC_PIN6 6
-#define GPIOC_PIN7 7
-#define GPIOC_PIN8 8
-#define GPIOC_PIN9 9
-#define GPIOC_SPI3_SCK 10
-#define GPIOC_SPI3_MISO 11
-#define GPIOC_SPI3_MOSI 12
-#define GPIOC_PIN13 13
-#define GPIOC_OSC32_IN 14
-#define GPIOC_OSC32_OUT 15
-
-#define GPIOD_CAN_RX 0
-#define GPIOD_CAN_TX 1
-#define GPIOD_LCD_CS 2
-#define GPIOD_USART2_CTS 3
-#define GPIOD_USART2_RST 4
-#define GPIOD_USART2_TX 5
-#define GPIOD_USART2_RX 6
-#define GPIOD_PIN7 7
-#define GPIOD_PIN8 8
-#define GPIOD_PIN9 9
-#define GPIOD_PIN10 10
-#define GPIOD_AUDIO_RST 11
-#define GPIOD_PIN12 12
-#define GPIOD_PIN13 13
-#define GPIOD_PIN14 14
-#define GPIOD_PIN15 15
-
-#define GPIOE_PIN0 0
-#define GPIOE_PIN1 1
-#define GPIOE_SD_CS 2
-#define GPIOE_SD_DETECT 3
-#define GPIOE_PIN4 4
-#define GPIOE_PIN5 5
-#define GPIOE_JOY_SEL 6
-#define GPIOE_RTD_IN 7
-#define GPIOE_PRESSUREP 8
-#define GPIOE_PRESSUREN 9
-#define GPIOE_PIN10 10
-#define GPIOE_PIN11 11
-#define GPIOE_PIN12 12
-#define GPIOE_PIN13 13
-#define GPIOE_PRESSURE_TEPM 14
-#define GPIOE_PIN15 15
-
-#define GPIOF_OSC_IN 0
-#define GPIOF_OSC_OUT 1
-#define GPIOF_JOY_DOWN 2
-#define GPIOF_PIN3 3
-#define GPIOF_JOY_LEFT 4
-#define GPIOF_PIN5 5
-#define GPIOF_PIN6 6
-#define GPIOF_PIN7 7
-#define GPIOF_PIN8 8
-#define GPIOF_JOY_RIGHT 9
-#define GPIOF_JOY_UP 10
-#define GPIOF_PIN11 11
-#define GPIOF_PIN12 12
-#define GPIOF_PIN13 13
-#define GPIOF_PIN14 14
-#define GPIOF_PIN15 15
-
-/*
- * I/O ports initial setup, this configuration is established soon after reset
- * in the initialization code.
- * Please refer to the STM32 Reference Manual for details.
- */
-#define PIN_MODE_INPUT(n) (0U << ((n) * 2))
-#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2))
-#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2))
-#define PIN_MODE_ANALOG(n) (3U << ((n) * 2))
-#define PIN_ODR_LOW(n) (0U << (n))
-#define PIN_ODR_HIGH(n) (1U << (n))
-#define PIN_OTYPE_PUSHPULL(n) (0U << (n))
-#define PIN_OTYPE_OPENDRAIN(n) (1U << (n))
-#define PIN_OSPEED_2M(n) (0U << ((n) * 2))
-#define PIN_OSPEED_25M(n) (1U << ((n) * 2))
-#define PIN_OSPEED_50M(n) (2U << ((n) * 2))
-#define PIN_OSPEED_100M(n) (3U << ((n) * 2))
-#define PIN_PUPDR_FLOATING(n) (0U << ((n) * 2))
-#define PIN_PUPDR_PULLUP(n) (1U << ((n) * 2))
-#define PIN_PUPDR_PULLDOWN(n) (2U << ((n) * 2))
-#define PIN_AFIO_AF(n, v) ((v##U) << ((n % 8) * 4))
-
-/*
- * GPIOA setup:
- *
- * PA0 - WKUP_BUTTON (input floating).
- * PA1 - LDR_OUT (analog).
- * PA2 - KEY_BUTTON (input floating).
- * PA3 - PIN3 (input pullup).
- * PA4 - PIN4 (input pullup).
- * PA5 - PIN5 (input floating).
- * PA6 - PIN6 (input pullup).
- * PA7 - COMP2_OUT (output pushpull maximum).
- * PA8 - I2C2_SMB (input floating).
- * PA9 - I2C2_SCL (alternate 4).
- * PA10 - I2C2_SDA (alternate 4).
- * PA11 - USB_DM (alternate 14).
- * PA12 - USB_DP (alternate 14).
- * PA13 - SWDIO (alternate 0).
- * PA14 - SWCLK (alternate 0).
- * PA15 - JTDI (alternate 0).
- */
-#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_WKUP_BUTTON) | \
- PIN_MODE_ANALOG(GPIOA_LDR_OUT) | \
- PIN_MODE_INPUT(GPIOA_KEY_BUTTON) | \
- PIN_MODE_INPUT(GPIOA_PIN3) | \
- PIN_MODE_INPUT(GPIOA_PIN4) | \
- PIN_MODE_INPUT(GPIOA_PIN5) | \
- PIN_MODE_INPUT(GPIOA_PIN6) | \
- PIN_MODE_OUTPUT(GPIOA_COMP2_OUT) | \
- PIN_MODE_INPUT(GPIOA_I2C2_SMB) | \
- PIN_MODE_ALTERNATE(GPIOA_I2C2_SCL) | \
- PIN_MODE_ALTERNATE(GPIOA_I2C2_SDA) | \
- PIN_MODE_ALTERNATE(GPIOA_USB_DM) | \
- PIN_MODE_ALTERNATE(GPIOA_USB_DP) | \
- PIN_MODE_ALTERNATE(GPIOA_SWDIO) | \
- PIN_MODE_ALTERNATE(GPIOA_SWCLK) | \
- PIN_MODE_ALTERNATE(GPIOA_JTDI))
-#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_WKUP_BUTTON) |\
- PIN_OTYPE_PUSHPULL(GPIOA_LDR_OUT) | \
- PIN_OTYPE_PUSHPULL(GPIOA_KEY_BUTTON) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN4) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN5) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN6) | \
- PIN_OTYPE_PUSHPULL(GPIOA_COMP2_OUT) | \
- PIN_OTYPE_PUSHPULL(GPIOA_I2C2_SMB) | \
- PIN_OTYPE_OPENDRAIN(GPIOA_I2C2_SCL) | \
- PIN_OTYPE_OPENDRAIN(GPIOA_I2C2_SDA) | \
- PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) | \
- PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) | \
- PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | \
- PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | \
- PIN_OTYPE_PUSHPULL(GPIOA_JTDI))
-#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_2M(GPIOA_WKUP_BUTTON) | \
- PIN_OSPEED_2M(GPIOA_LDR_OUT) | \
- PIN_OSPEED_2M(GPIOA_KEY_BUTTON) | \
- PIN_OSPEED_2M(GPIOA_PIN3) | \
- PIN_OSPEED_2M(GPIOA_PIN4) | \
- PIN_OSPEED_100M(GPIOA_PIN5) | \
- PIN_OSPEED_2M(GPIOA_PIN6) | \
- PIN_OSPEED_100M(GPIOA_COMP2_OUT) | \
- PIN_OSPEED_2M(GPIOA_I2C2_SMB) | \
- PIN_OSPEED_100M(GPIOA_I2C2_SCL) | \
- PIN_OSPEED_100M(GPIOA_I2C2_SDA) | \
- PIN_OSPEED_100M(GPIOA_USB_DM) | \
- PIN_OSPEED_2M(GPIOA_USB_DP) | \
- PIN_OSPEED_100M(GPIOA_SWDIO) | \
- PIN_OSPEED_100M(GPIOA_SWCLK) | \
- PIN_OSPEED_100M(GPIOA_JTDI))
-#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_WKUP_BUTTON) |\
- PIN_PUPDR_FLOATING(GPIOA_LDR_OUT) | \
- PIN_PUPDR_FLOATING(GPIOA_KEY_BUTTON) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN3) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN4) | \
- PIN_PUPDR_FLOATING(GPIOA_PIN5) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN6) | \
- PIN_PUPDR_FLOATING(GPIOA_COMP2_OUT) | \
- PIN_PUPDR_FLOATING(GPIOA_I2C2_SMB) | \
- PIN_PUPDR_FLOATING(GPIOA_I2C2_SCL) | \
- PIN_PUPDR_FLOATING(GPIOA_I2C2_SDA) | \
- PIN_PUPDR_FLOATING(GPIOA_USB_DM) | \
- PIN_PUPDR_FLOATING(GPIOA_USB_DP) | \
- PIN_PUPDR_PULLUP(GPIOA_SWDIO) | \
- PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | \
- PIN_PUPDR_FLOATING(GPIOA_JTDI))
-#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_WKUP_BUTTON) | \
- PIN_ODR_HIGH(GPIOA_LDR_OUT) | \
- PIN_ODR_HIGH(GPIOA_KEY_BUTTON) | \
- PIN_ODR_HIGH(GPIOA_PIN3) | \
- PIN_ODR_HIGH(GPIOA_PIN4) | \
- PIN_ODR_HIGH(GPIOA_PIN5) | \
- PIN_ODR_HIGH(GPIOA_PIN6) | \
- PIN_ODR_LOW(GPIOA_COMP2_OUT) | \
- PIN_ODR_HIGH(GPIOA_I2C2_SMB) | \
- PIN_ODR_HIGH(GPIOA_I2C2_SCL) | \
- PIN_ODR_HIGH(GPIOA_I2C2_SDA) | \
- PIN_ODR_HIGH(GPIOA_USB_DM) | \
- PIN_ODR_HIGH(GPIOA_USB_DP) | \
- PIN_ODR_HIGH(GPIOA_SWDIO) | \
- PIN_ODR_HIGH(GPIOA_SWCLK) | \
- PIN_ODR_HIGH(GPIOA_JTDI))
-#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_WKUP_BUTTON, 0) | \
- PIN_AFIO_AF(GPIOA_LDR_OUT, 0) | \
- PIN_AFIO_AF(GPIOA_KEY_BUTTON, 0) | \
- PIN_AFIO_AF(GPIOA_PIN3, 0) | \
- PIN_AFIO_AF(GPIOA_PIN4, 0) | \
- PIN_AFIO_AF(GPIOA_PIN5, 5) | \
- PIN_AFIO_AF(GPIOA_PIN6, 0) | \
- PIN_AFIO_AF(GPIOA_COMP2_OUT, 0))
-#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_I2C2_SMB, 0) | \
- PIN_AFIO_AF(GPIOA_I2C2_SCL, 4) | \
- PIN_AFIO_AF(GPIOA_I2C2_SDA, 4) | \
- PIN_AFIO_AF(GPIOA_USB_DM, 14) | \
- PIN_AFIO_AF(GPIOA_USB_DP, 14) | \
- PIN_AFIO_AF(GPIOA_SWDIO, 0) | \
- PIN_AFIO_AF(GPIOA_SWCLK, 0) | \
- PIN_AFIO_AF(GPIOA_JTDI, 0))
-
-/*
- * GPIOB setup:
- *
- * PB0 - MIC_IN (analog).
- * PB1 - ADC_POT_IN (analog).
- * PB2 - PIN2 (input pullup).
- * PB3 - SWO (alternate 0).
- * PB4 - JTRST (input floating).
- * PB5 - PIN5 (input pullup).
- * PB6 - I2C1_SCL (alternate 4).
- * PB7 - I2C1_SDA (alternate 4).
- * PB8 - PIN8 (input pullup).
- * PB9 - PIN9 (input pullup).
- * PB10 - PIN10 (input pullup).
- * PB11 - PIN11 (input pullup).
- * PB12 - PIN12 (input pullup).
- * PB13 - PIN13 (input pullup).
- * PB14 - PIN14 (input pullup).
- * PB15 - PIN15 (input pullup).
- */
-#define VAL_GPIOB_MODER (PIN_MODE_ANALOG(GPIOB_MIC_IN) | \
- PIN_MODE_ANALOG(GPIOB_ADC_POT_IN) | \
- PIN_MODE_INPUT(GPIOB_PIN2) | \
- PIN_MODE_ALTERNATE(GPIOB_SWO) | \
- PIN_MODE_INPUT(GPIOB_JTRST) | \
- PIN_MODE_INPUT(GPIOB_PIN5) | \
- PIN_MODE_ALTERNATE(GPIOB_I2C1_SCL) | \
- PIN_MODE_ALTERNATE(GPIOB_I2C1_SDA) | \
- PIN_MODE_INPUT(GPIOB_PIN8) | \
- PIN_MODE_INPUT(GPIOB_PIN9) | \
- PIN_MODE_INPUT(GPIOB_PIN10) | \
- PIN_MODE_INPUT(GPIOB_PIN11) | \
- PIN_MODE_INPUT(GPIOB_PIN12) | \
- PIN_MODE_INPUT(GPIOB_PIN13) | \
- PIN_MODE_INPUT(GPIOB_PIN14) | \
- PIN_MODE_INPUT(GPIOB_PIN15))
-#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_MIC_IN) | \
- PIN_OTYPE_PUSHPULL(GPIOB_ADC_POT_IN) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | \
- PIN_OTYPE_PUSHPULL(GPIOB_SWO) | \
- PIN_OTYPE_PUSHPULL(GPIOB_JTRST) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | \
- PIN_OTYPE_OPENDRAIN(GPIOB_I2C1_SCL) | \
- PIN_OTYPE_OPENDRAIN(GPIOB_I2C1_SDA) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN9) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN10) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN13) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN14) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN15))
-#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_2M(GPIOB_MIC_IN) | \
- PIN_OSPEED_2M(GPIOB_ADC_POT_IN) | \
- PIN_OSPEED_2M(GPIOB_PIN2) | \
- PIN_OSPEED_100M(GPIOB_SWO) | \
- PIN_OSPEED_100M(GPIOB_JTRST) | \
- PIN_OSPEED_2M(GPIOB_PIN5) | \
- PIN_OSPEED_100M(GPIOB_I2C1_SCL) | \
- PIN_OSPEED_100M(GPIOB_I2C1_SDA) | \
- PIN_OSPEED_2M(GPIOB_PIN8) | \
- PIN_OSPEED_2M(GPIOB_PIN9) | \
- PIN_OSPEED_2M(GPIOB_PIN10) | \
- PIN_OSPEED_2M(GPIOB_PIN11) | \
- PIN_OSPEED_2M(GPIOB_PIN12) | \
- PIN_OSPEED_2M(GPIOB_PIN13) | \
- PIN_OSPEED_2M(GPIOB_PIN14) | \
- PIN_OSPEED_2M(GPIOB_PIN15))
-#define VAL_GPIOB_PUPDR (PIN_PUPDR_FLOATING(GPIOB_MIC_IN) | \
- PIN_PUPDR_FLOATING(GPIOB_ADC_POT_IN) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN2) | \
- PIN_PUPDR_FLOATING(GPIOB_SWO) | \
- PIN_PUPDR_FLOATING(GPIOB_JTRST) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN5) | \
- PIN_PUPDR_FLOATING(GPIOB_I2C1_SCL) | \
- PIN_PUPDR_FLOATING(GPIOB_I2C1_SDA) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN8) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN9) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN10) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN11) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN12) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN13) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN14) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN15))
-#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_MIC_IN) | \
- PIN_ODR_HIGH(GPIOB_ADC_POT_IN) | \
- PIN_ODR_HIGH(GPIOB_PIN2) | \
- PIN_ODR_HIGH(GPIOB_SWO) | \
- PIN_ODR_HIGH(GPIOB_JTRST) | \
- PIN_ODR_HIGH(GPIOB_PIN5) | \
- PIN_ODR_HIGH(GPIOB_I2C1_SCL) | \
- PIN_ODR_HIGH(GPIOB_I2C1_SDA) | \
- PIN_ODR_HIGH(GPIOB_PIN8) | \
- PIN_ODR_HIGH(GPIOB_PIN9) | \
- PIN_ODR_HIGH(GPIOB_PIN10) | \
- PIN_ODR_HIGH(GPIOB_PIN11) | \
- PIN_ODR_HIGH(GPIOB_PIN12) | \
- PIN_ODR_HIGH(GPIOB_PIN13) | \
- PIN_ODR_HIGH(GPIOB_PIN14) | \
- PIN_ODR_HIGH(GPIOB_PIN15))
-#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_MIC_IN, 0) | \
- PIN_AFIO_AF(GPIOB_ADC_POT_IN, 0) | \
- PIN_AFIO_AF(GPIOB_PIN2, 0) | \
- PIN_AFIO_AF(GPIOB_SWO, 0) | \
- PIN_AFIO_AF(GPIOB_JTRST, 0) | \
- PIN_AFIO_AF(GPIOB_PIN5, 0) | \
- PIN_AFIO_AF(GPIOB_I2C1_SCL, 4) | \
- PIN_AFIO_AF(GPIOB_I2C1_SDA, 4))
-#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0) | \
- PIN_AFIO_AF(GPIOB_PIN9, 0) | \
- PIN_AFIO_AF(GPIOB_PIN10, 0) | \
- PIN_AFIO_AF(GPIOB_PIN11, 0) | \
- PIN_AFIO_AF(GPIOB_PIN12, 0) | \
- PIN_AFIO_AF(GPIOB_PIN13, 0) | \
- PIN_AFIO_AF(GPIOB_PIN14, 0) | \
- PIN_AFIO_AF(GPIOB_PIN15, 0))
-
-/*
- * GPIOC setup:
- *
- * PC0 - LED1 (output opendrain maximum).
- * PC1 - LED2 (output opendrain maximum).
- * PC2 - LED3 (output opendrain maximum).
- * PC3 - LED4 (output opendrain maximum).
- * PC4 - PIN4 (input pullup).
- * PC5 - USB_DISCONNECT (output pushpull maximum).
- * PC6 - PIN6 (input pullup).
- * PC7 - PIN7 (input pullup).
- * PC8 - PIN8 (input pullup).
- * PC9 - PIN9 (input pullup).
- * PC10 - SPI3_SCK (alternate 6).
- * PC11 - SPI3_MISO (alternate 6).
- * PC12 - SPI3_MOSI (alternate 6).
- * PC13 - PIN13 (input pullup).
- * PC14 - OSC32_IN (input floating).
- * PC15 - OSC32_OUT (input floating).
- */
-#define VAL_GPIOC_MODER (PIN_MODE_OUTPUT(GPIOC_LED1) | \
- PIN_MODE_OUTPUT(GPIOC_LED2) | \
- PIN_MODE_OUTPUT(GPIOC_LED3) | \
- PIN_MODE_OUTPUT(GPIOC_LED4) | \
- PIN_MODE_INPUT(GPIOC_PIN4) | \
- PIN_MODE_OUTPUT(GPIOC_USB_DISCONNECT) |\
- PIN_MODE_INPUT(GPIOC_PIN6) | \
- PIN_MODE_INPUT(GPIOC_PIN7) | \
- PIN_MODE_INPUT(GPIOC_PIN8) | \
- PIN_MODE_INPUT(GPIOC_PIN9) | \
- PIN_MODE_ALTERNATE(GPIOC_SPI3_SCK) | \
- PIN_MODE_ALTERNATE(GPIOC_SPI3_MISO) | \
- PIN_MODE_ALTERNATE(GPIOC_SPI3_MOSI) | \
- PIN_MODE_INPUT(GPIOC_PIN13) | \
- PIN_MODE_INPUT(GPIOC_OSC32_IN) | \
- PIN_MODE_INPUT(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_OTYPER (PIN_OTYPE_OPENDRAIN(GPIOC_LED1) | \
- PIN_OTYPE_OPENDRAIN(GPIOC_LED2) | \
- PIN_OTYPE_OPENDRAIN(GPIOC_LED3) | \
- PIN_OTYPE_OPENDRAIN(GPIOC_LED4) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | \
- PIN_OTYPE_PUSHPULL(GPIOC_USB_DISCONNECT) |\
- PIN_OTYPE_PUSHPULL(GPIOC_PIN6) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN7) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN8) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN9) | \
- PIN_OTYPE_PUSHPULL(GPIOC_SPI3_SCK) | \
- PIN_OTYPE_PUSHPULL(GPIOC_SPI3_MISO) | \
- PIN_OTYPE_PUSHPULL(GPIOC_SPI3_MOSI) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | \
- PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) | \
- PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_100M(GPIOC_LED1) | \
- PIN_OSPEED_100M(GPIOC_LED2) | \
- PIN_OSPEED_100M(GPIOC_LED3) | \
- PIN_OSPEED_100M(GPIOC_LED4) | \
- PIN_OSPEED_2M(GPIOC_PIN4) | \
- PIN_OSPEED_100M(GPIOC_USB_DISCONNECT) |\
- PIN_OSPEED_2M(GPIOC_PIN6) | \
- PIN_OSPEED_2M(GPIOC_PIN7) | \
- PIN_OSPEED_2M(GPIOC_PIN8) | \
- PIN_OSPEED_2M(GPIOC_PIN9) | \
- PIN_OSPEED_100M(GPIOC_SPI3_SCK) | \
- PIN_OSPEED_100M(GPIOC_SPI3_MISO) | \
- PIN_OSPEED_100M(GPIOC_SPI3_MOSI) | \
- PIN_OSPEED_2M(GPIOC_PIN13) | \
- PIN_OSPEED_100M(GPIOC_OSC32_IN) | \
- PIN_OSPEED_100M(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_PUPDR (PIN_PUPDR_FLOATING(GPIOC_LED1) | \
- PIN_PUPDR_FLOATING(GPIOC_LED2) | \
- PIN_PUPDR_FLOATING(GPIOC_LED3) | \
- PIN_PUPDR_FLOATING(GPIOC_LED4) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN4) | \
- PIN_PUPDR_FLOATING(GPIOC_USB_DISCONNECT) |\
- PIN_PUPDR_PULLUP(GPIOC_PIN6) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN7) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN8) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN9) | \
- PIN_PUPDR_FLOATING(GPIOC_SPI3_SCK) | \
- PIN_PUPDR_PULLUP(GPIOC_SPI3_MISO) | \
- PIN_PUPDR_FLOATING(GPIOC_SPI3_MOSI) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN13) | \
- PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) | \
- PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_LED1) | \
- PIN_ODR_HIGH(GPIOC_LED2) | \
- PIN_ODR_HIGH(GPIOC_LED3) | \
- PIN_ODR_HIGH(GPIOC_LED4) | \
- PIN_ODR_HIGH(GPIOC_PIN4) | \
- PIN_ODR_HIGH(GPIOC_USB_DISCONNECT) | \
- PIN_ODR_HIGH(GPIOC_PIN6) | \
- PIN_ODR_HIGH(GPIOC_PIN7) | \
- PIN_ODR_HIGH(GPIOC_PIN8) | \
- PIN_ODR_HIGH(GPIOC_PIN9) | \
- PIN_ODR_HIGH(GPIOC_SPI3_SCK) | \
- PIN_ODR_HIGH(GPIOC_SPI3_MISO) | \
- PIN_ODR_HIGH(GPIOC_SPI3_MOSI) | \
- PIN_ODR_HIGH(GPIOC_PIN13) | \
- PIN_ODR_HIGH(GPIOC_OSC32_IN) | \
- PIN_ODR_HIGH(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_LED1, 0) | \
- PIN_AFIO_AF(GPIOC_LED2, 0) | \
- PIN_AFIO_AF(GPIOC_LED3, 0) | \
- PIN_AFIO_AF(GPIOC_LED4, 0) | \
- PIN_AFIO_AF(GPIOC_PIN4, 0) | \
- PIN_AFIO_AF(GPIOC_USB_DISCONNECT, 0) | \
- PIN_AFIO_AF(GPIOC_PIN6, 0) | \
- PIN_AFIO_AF(GPIOC_PIN7, 0))
-#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_PIN8, 0) | \
- PIN_AFIO_AF(GPIOC_PIN9, 0) | \
- PIN_AFIO_AF(GPIOC_SPI3_SCK, 6) | \
- PIN_AFIO_AF(GPIOC_SPI3_MISO, 6) | \
- PIN_AFIO_AF(GPIOC_SPI3_MOSI, 6) | \
- PIN_AFIO_AF(GPIOC_PIN13, 0) | \
- PIN_AFIO_AF(GPIOC_OSC32_IN, 0) | \
- PIN_AFIO_AF(GPIOC_OSC32_OUT, 0))
-
-/*
- * GPIOD setup:
- *
- * PD0 - CAN_RX (alternate 7).
- * PD1 - CAN_TX (alternate 7).
- * PD2 - LCD_CS (output pushpull maximum).
- * PD3 - USART2_CTS (alternate 7).
- * PD4 - USART2_RST (alternate 7).
- * PD5 - USART2_TX (alternate 7).
- * PD6 - USART2_RX (alternate 7).
- * PD7 - PIN7 (input pullup).
- * PD8 - PIN8 (input pullup).
- * PD9 - PIN9 (input pullup).
- * PD10 - PIN10 (input pullup).
- * PD11 - AUDIO_RST (output pushpull maximum).
- * PD12 - PIN12 (input pullup).
- * PD13 - PIN13 (input pullup).
- * PD14 - PIN14 (input pullup).
- * PD15 - PIN15 (input pullup).
- */
-#define VAL_GPIOD_MODER (PIN_MODE_ALTERNATE(GPIOD_CAN_RX) | \
- PIN_MODE_ALTERNATE(GPIOD_CAN_TX) | \
- PIN_MODE_OUTPUT(GPIOD_LCD_CS) | \
- PIN_MODE_ALTERNATE(GPIOD_USART2_CTS) | \
- PIN_MODE_ALTERNATE(GPIOD_USART2_RST) | \
- PIN_MODE_ALTERNATE(GPIOD_USART2_TX) | \
- PIN_MODE_ALTERNATE(GPIOD_USART2_RX) | \
- PIN_MODE_INPUT(GPIOD_PIN7) | \
- PIN_MODE_INPUT(GPIOD_PIN8) | \
- PIN_MODE_INPUT(GPIOD_PIN9) | \
- PIN_MODE_INPUT(GPIOD_PIN10) | \
- PIN_MODE_OUTPUT(GPIOD_AUDIO_RST) | \
- PIN_MODE_INPUT(GPIOD_PIN12) | \
- PIN_MODE_INPUT(GPIOD_PIN13) | \
- PIN_MODE_INPUT(GPIOD_PIN14) | \
- PIN_MODE_INPUT(GPIOD_PIN15))
-#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_CAN_RX) | \
- PIN_OTYPE_PUSHPULL(GPIOD_CAN_TX) | \
- PIN_OTYPE_PUSHPULL(GPIOD_LCD_CS) | \
- PIN_OTYPE_PUSHPULL(GPIOD_USART2_CTS) | \
- PIN_OTYPE_PUSHPULL(GPIOD_USART2_RST) | \
- PIN_OTYPE_PUSHPULL(GPIOD_USART2_TX) | \
- PIN_OTYPE_PUSHPULL(GPIOD_USART2_RX) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | \
- PIN_OTYPE_PUSHPULL(GPIOD_AUDIO_RST) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN15))
-#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_100M(GPIOD_CAN_RX) | \
- PIN_OSPEED_100M(GPIOD_CAN_TX) | \
- PIN_OSPEED_100M(GPIOD_LCD_CS) | \
- PIN_OSPEED_100M(GPIOD_USART2_CTS) | \
- PIN_OSPEED_100M(GPIOD_USART2_RST) | \
- PIN_OSPEED_100M(GPIOD_USART2_TX) | \
- PIN_OSPEED_100M(GPIOD_USART2_RX) | \
- PIN_OSPEED_2M(GPIOD_PIN7) | \
- PIN_OSPEED_2M(GPIOD_PIN8) | \
- PIN_OSPEED_2M(GPIOD_PIN9) | \
- PIN_OSPEED_2M(GPIOD_PIN10) | \
- PIN_OSPEED_100M(GPIOD_AUDIO_RST) | \
- PIN_OSPEED_2M(GPIOD_PIN12) | \
- PIN_OSPEED_2M(GPIOD_PIN13) | \
- PIN_OSPEED_2M(GPIOD_PIN14) | \
- PIN_OSPEED_2M(GPIOD_PIN15))
-#define VAL_GPIOD_PUPDR (PIN_PUPDR_FLOATING(GPIOD_CAN_RX) | \
- PIN_PUPDR_FLOATING(GPIOD_CAN_TX) | \
- PIN_PUPDR_FLOATING(GPIOD_LCD_CS) | \
- PIN_PUPDR_FLOATING(GPIOD_USART2_CTS) | \
- PIN_PUPDR_FLOATING(GPIOD_USART2_RST) | \
- PIN_PUPDR_FLOATING(GPIOD_USART2_TX) | \
- PIN_PUPDR_FLOATING(GPIOD_USART2_RX) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN7) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN8) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN9) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN10) | \
- PIN_PUPDR_FLOATING(GPIOD_AUDIO_RST) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN12) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN13) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN14) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN15))
-#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_CAN_RX) | \
- PIN_ODR_HIGH(GPIOD_CAN_TX) | \
- PIN_ODR_HIGH(GPIOD_LCD_CS) | \
- PIN_ODR_HIGH(GPIOD_USART2_CTS) | \
- PIN_ODR_HIGH(GPIOD_USART2_RST) | \
- PIN_ODR_HIGH(GPIOD_USART2_TX) | \
- PIN_ODR_HIGH(GPIOD_USART2_RX) | \
- PIN_ODR_HIGH(GPIOD_PIN7) | \
- PIN_ODR_HIGH(GPIOD_PIN8) | \
- PIN_ODR_HIGH(GPIOD_PIN9) | \
- PIN_ODR_HIGH(GPIOD_PIN10) | \
- PIN_ODR_LOW(GPIOD_AUDIO_RST) | \
- PIN_ODR_HIGH(GPIOD_PIN12) | \
- PIN_ODR_HIGH(GPIOD_PIN13) | \
- PIN_ODR_HIGH(GPIOD_PIN14) | \
- PIN_ODR_HIGH(GPIOD_PIN15))
-#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_CAN_RX, 7) | \
- PIN_AFIO_AF(GPIOD_CAN_TX, 7) | \
- PIN_AFIO_AF(GPIOD_LCD_CS, 0) | \
- PIN_AFIO_AF(GPIOD_USART2_CTS, 7) | \
- PIN_AFIO_AF(GPIOD_USART2_RST, 7) | \
- PIN_AFIO_AF(GPIOD_USART2_TX, 7) | \
- PIN_AFIO_AF(GPIOD_USART2_RX, 7) | \
- PIN_AFIO_AF(GPIOD_PIN7, 0))
-#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0) | \
- PIN_AFIO_AF(GPIOD_PIN9, 0) | \
- PIN_AFIO_AF(GPIOD_PIN10, 0) | \
- PIN_AFIO_AF(GPIOD_AUDIO_RST, 0) | \
- PIN_AFIO_AF(GPIOD_PIN12, 0) | \
- PIN_AFIO_AF(GPIOD_PIN13, 0) | \
- PIN_AFIO_AF(GPIOD_PIN14, 0) | \
- PIN_AFIO_AF(GPIOD_PIN15, 0))
-
-/*
- * GPIOE setup:
- *
- * PE0 - PIN0 (input pullup).
- * PE1 - PIN1 (input pullup).
- * PE2 - SD_CS (output opendrain maximum).
- * PE3 - SD_DETECT (input pullup).
- * PE4 - PIN4 (input pullup).
- * PE5 - PIN5 (input pullup).
- * PE6 - JOY_SEL (input pulldown).
- * PE7 - RTD_IN (analog).
- * PE8 - PRESSUREP (analog).
- * PE9 - PRESSUREN (analog).
- * PE10 - PIN10 (input pullup).
- * PE11 - PIN11 (input pullup).
- * PE12 - PIN12 (input pullup).
- * PE13 - PIN13 (input pullup).
- * PE14 - PRESSURE_TEPM (input floating).
- * PE15 - PIN15 (input pullup).
- */
-#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_PIN0) | \
- PIN_MODE_INPUT(GPIOE_PIN1) | \
- PIN_MODE_OUTPUT(GPIOE_SD_CS) | \
- PIN_MODE_INPUT(GPIOE_SD_DETECT) | \
- PIN_MODE_INPUT(GPIOE_PIN4) | \
- PIN_MODE_INPUT(GPIOE_PIN5) | \
- PIN_MODE_INPUT(GPIOE_JOY_SEL) | \
- PIN_MODE_ANALOG(GPIOE_RTD_IN) | \
- PIN_MODE_ANALOG(GPIOE_PRESSUREP) | \
- PIN_MODE_ANALOG(GPIOE_PRESSUREN) | \
- PIN_MODE_INPUT(GPIOE_PIN10) | \
- PIN_MODE_INPUT(GPIOE_PIN11) | \
- PIN_MODE_INPUT(GPIOE_PIN12) | \
- PIN_MODE_INPUT(GPIOE_PIN13) | \
- PIN_MODE_INPUT(GPIOE_PRESSURE_TEPM) | \
- PIN_MODE_INPUT(GPIOE_PIN15))
-#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN1) | \
- PIN_OTYPE_OPENDRAIN(GPIOE_SD_CS) | \
- PIN_OTYPE_PUSHPULL(GPIOE_SD_DETECT) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN4) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN5) | \
- PIN_OTYPE_PUSHPULL(GPIOE_JOY_SEL) | \
- PIN_OTYPE_PUSHPULL(GPIOE_RTD_IN) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PRESSUREP) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PRESSUREN) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN10) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PRESSURE_TEPM) |\
- PIN_OTYPE_PUSHPULL(GPIOE_PIN15))
-#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_2M(GPIOE_PIN0) | \
- PIN_OSPEED_2M(GPIOE_PIN1) | \
- PIN_OSPEED_100M(GPIOE_SD_CS) | \
- PIN_OSPEED_100M(GPIOE_SD_DETECT) | \
- PIN_OSPEED_2M(GPIOE_PIN4) | \
- PIN_OSPEED_2M(GPIOE_PIN5) | \
- PIN_OSPEED_100M(GPIOE_JOY_SEL) | \
- PIN_OSPEED_2M(GPIOE_RTD_IN) | \
- PIN_OSPEED_100M(GPIOE_PRESSUREP) | \
- PIN_OSPEED_100M(GPIOE_PRESSUREN) | \
- PIN_OSPEED_2M(GPIOE_PIN10) | \
- PIN_OSPEED_2M(GPIOE_PIN11) | \
- PIN_OSPEED_2M(GPIOE_PIN12) | \
- PIN_OSPEED_2M(GPIOE_PIN13) | \
- PIN_OSPEED_2M(GPIOE_PRESSURE_TEPM) | \
- PIN_OSPEED_2M(GPIOE_PIN15))
-#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_PIN0) | \
- PIN_PUPDR_PULLUP(GPIOE_PIN1) | \
- PIN_PUPDR_FLOATING(GPIOE_SD_CS) | \
- PIN_PUPDR_PULLUP(GPIOE_SD_DETECT) | \
- PIN_PUPDR_PULLUP(GPIOE_PIN4) | \
- PIN_PUPDR_PULLUP(GPIOE_PIN5) | \
- PIN_PUPDR_PULLDOWN(GPIOE_JOY_SEL) | \
- PIN_PUPDR_FLOATING(GPIOE_RTD_IN) | \
- PIN_PUPDR_FLOATING(GPIOE_PRESSUREP) | \
- PIN_PUPDR_FLOATING(GPIOE_PRESSUREN) | \
- PIN_PUPDR_PULLUP(GPIOE_PIN10) | \
- PIN_PUPDR_PULLUP(GPIOE_PIN11) | \
- PIN_PUPDR_PULLUP(GPIOE_PIN12) | \
- PIN_PUPDR_PULLUP(GPIOE_PIN13) | \
- PIN_PUPDR_FLOATING(GPIOE_PRESSURE_TEPM) |\
- PIN_PUPDR_PULLUP(GPIOE_PIN15))
-#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_PIN0) | \
- PIN_ODR_HIGH(GPIOE_PIN1) | \
- PIN_ODR_HIGH(GPIOE_SD_CS) | \
- PIN_ODR_HIGH(GPIOE_SD_DETECT) | \
- PIN_ODR_HIGH(GPIOE_PIN4) | \
- PIN_ODR_HIGH(GPIOE_PIN5) | \
- PIN_ODR_HIGH(GPIOE_JOY_SEL) | \
- PIN_ODR_HIGH(GPIOE_RTD_IN) | \
- PIN_ODR_HIGH(GPIOE_PRESSUREP) | \
- PIN_ODR_HIGH(GPIOE_PRESSUREN) | \
- PIN_ODR_HIGH(GPIOE_PIN10) | \
- PIN_ODR_HIGH(GPIOE_PIN11) | \
- PIN_ODR_HIGH(GPIOE_PIN12) | \
- PIN_ODR_LOW(GPIOE_PIN13) | \
- PIN_ODR_LOW(GPIOE_PRESSURE_TEPM) | \
- PIN_ODR_LOW(GPIOE_PIN15))
-#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_PIN0, 0) | \
- PIN_AFIO_AF(GPIOE_PIN1, 0) | \
- PIN_AFIO_AF(GPIOE_SD_CS, 0) | \
- PIN_AFIO_AF(GPIOE_SD_DETECT, 0) | \
- PIN_AFIO_AF(GPIOE_PIN4, 0) | \
- PIN_AFIO_AF(GPIOE_PIN5, 0) | \
- PIN_AFIO_AF(GPIOE_JOY_SEL, 0) | \
- PIN_AFIO_AF(GPIOE_RTD_IN, 0))
-#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PRESSUREP, 0) | \
- PIN_AFIO_AF(GPIOE_PRESSUREN, 0) | \
- PIN_AFIO_AF(GPIOE_PIN10, 0) | \
- PIN_AFIO_AF(GPIOE_PIN11, 0) | \
- PIN_AFIO_AF(GPIOE_PIN12, 0) | \
- PIN_AFIO_AF(GPIOE_PIN13, 0) | \
- PIN_AFIO_AF(GPIOE_PRESSURE_TEPM, 0) | \
- PIN_AFIO_AF(GPIOE_PIN15, 0))
-
-/*
- * GPIOF setup:
- *
- * PF0 - OSC_IN (input floating).
- * PF1 - OSC_OUT (input floating).
- * PF2 - JOY_DOWN (input pulldown).
- * PF3 - PIN3 (input pullup).
- * PF4 - JOY_LEFT (input pulldown).
- * PF5 - PIN5 (input pullup).
- * PF6 - PIN6 (input pullup).
- * PF7 - PIN7 (input pullup).
- * PF8 - PIN8 (input pullup).
- * PF9 - JOY_RIGHT (input pulldown).
- * PF10 - JOY_UP (input pulldown).
- * PF11 - PIN11 (input pullup).
- * PF12 - PIN12 (input pullup).
- * PF13 - PIN13 (input pullup).
- * PF14 - PIN14 (input pullup).
- * PF15 - PIN15 (input pullup).
- */
-#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_OSC_IN) | \
- PIN_MODE_INPUT(GPIOF_OSC_OUT) | \
- PIN_MODE_INPUT(GPIOF_JOY_DOWN) | \
- PIN_MODE_INPUT(GPIOF_PIN3) | \
- PIN_MODE_INPUT(GPIOF_JOY_LEFT) | \
- PIN_MODE_INPUT(GPIOF_PIN5) | \
- PIN_MODE_INPUT(GPIOF_PIN6) | \
- PIN_MODE_INPUT(GPIOF_PIN7) | \
- PIN_MODE_INPUT(GPIOF_PIN8) | \
- PIN_MODE_INPUT(GPIOF_JOY_RIGHT) | \
- PIN_MODE_INPUT(GPIOF_JOY_UP) | \
- PIN_MODE_INPUT(GPIOF_PIN11) | \
- PIN_MODE_INPUT(GPIOF_PIN12) | \
- PIN_MODE_INPUT(GPIOF_PIN13) | \
- PIN_MODE_INPUT(GPIOF_PIN14) | \
- PIN_MODE_INPUT(GPIOF_PIN15))
-#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_OSC_IN) | \
- PIN_OTYPE_PUSHPULL(GPIOF_OSC_OUT) | \
- PIN_OTYPE_PUSHPULL(GPIOF_JOY_DOWN) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | \
- PIN_OTYPE_PUSHPULL(GPIOF_JOY_LEFT) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | \
- PIN_OTYPE_PUSHPULL(GPIOF_JOY_RIGHT) | \
- PIN_OTYPE_PUSHPULL(GPIOF_JOY_UP) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN15))
-#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_100M(GPIOF_OSC_IN) | \
- PIN_OSPEED_100M(GPIOF_OSC_OUT) | \
- PIN_OSPEED_100M(GPIOF_JOY_DOWN) | \
- PIN_OSPEED_2M(GPIOF_PIN3) | \
- PIN_OSPEED_100M(GPIOF_JOY_LEFT) | \
- PIN_OSPEED_2M(GPIOF_PIN5) | \
- PIN_OSPEED_2M(GPIOF_PIN6) | \
- PIN_OSPEED_2M(GPIOF_PIN7) | \
- PIN_OSPEED_2M(GPIOF_PIN8) | \
- PIN_OSPEED_100M(GPIOF_JOY_RIGHT) | \
- PIN_OSPEED_100M(GPIOF_JOY_UP) | \
- PIN_OSPEED_2M(GPIOF_PIN11) | \
- PIN_OSPEED_2M(GPIOF_PIN12) | \
- PIN_OSPEED_2M(GPIOF_PIN13) | \
- PIN_OSPEED_2M(GPIOF_PIN14) | \
- PIN_OSPEED_2M(GPIOF_PIN15))
-#define VAL_GPIOF_PUPDR (PIN_PUPDR_FLOATING(GPIOF_OSC_IN) | \
- PIN_PUPDR_FLOATING(GPIOF_OSC_OUT) | \
- PIN_PUPDR_PULLDOWN(GPIOF_JOY_DOWN) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN3) | \
- PIN_PUPDR_PULLDOWN(GPIOF_JOY_LEFT) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN5) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN6) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN7) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN8) | \
- PIN_PUPDR_PULLDOWN(GPIOF_JOY_RIGHT) | \
- PIN_PUPDR_PULLDOWN(GPIOF_JOY_UP) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN11) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN12) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN13) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN14) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN15))
-#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_OSC_IN) | \
- PIN_ODR_HIGH(GPIOF_OSC_OUT) | \
- PIN_ODR_HIGH(GPIOF_JOY_DOWN) | \
- PIN_ODR_HIGH(GPIOF_PIN3) | \
- PIN_ODR_HIGH(GPIOF_JOY_LEFT) | \
- PIN_ODR_HIGH(GPIOF_PIN5) | \
- PIN_ODR_HIGH(GPIOF_PIN6) | \
- PIN_ODR_HIGH(GPIOF_PIN7) | \
- PIN_ODR_HIGH(GPIOF_PIN8) | \
- PIN_ODR_HIGH(GPIOF_JOY_RIGHT) | \
- PIN_ODR_HIGH(GPIOF_JOY_UP) | \
- PIN_ODR_HIGH(GPIOF_PIN11) | \
- PIN_ODR_HIGH(GPIOF_PIN12) | \
- PIN_ODR_HIGH(GPIOF_PIN13) | \
- PIN_ODR_HIGH(GPIOF_PIN14) | \
- PIN_ODR_HIGH(GPIOF_PIN15))
-#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_OSC_IN, 0) | \
- PIN_AFIO_AF(GPIOF_OSC_OUT, 0) | \
- PIN_AFIO_AF(GPIOF_JOY_DOWN, 0) | \
- PIN_AFIO_AF(GPIOF_PIN3, 0) | \
- PIN_AFIO_AF(GPIOF_JOY_LEFT, 0) | \
- PIN_AFIO_AF(GPIOF_PIN5, 0) | \
- PIN_AFIO_AF(GPIOF_PIN6, 0) | \
- PIN_AFIO_AF(GPIOF_PIN7, 0))
-#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0) | \
- PIN_AFIO_AF(GPIOF_JOY_RIGHT, 0) | \
- PIN_AFIO_AF(GPIOF_JOY_UP, 0) | \
- PIN_AFIO_AF(GPIOF_PIN11, 0) | \
- PIN_AFIO_AF(GPIOF_PIN12, 0) | \
- PIN_AFIO_AF(GPIOF_PIN13, 0) | \
- PIN_AFIO_AF(GPIOF_PIN14, 0) | \
- PIN_AFIO_AF(GPIOF_PIN15, 0))
-
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
diff --git a/boards/ST_STM32373C_EVAL/board.mk b/boards/ST_STM32373C_EVAL/board.mk deleted file mode 100644 index 98a37d006..000000000 --- a/boards/ST_STM32373C_EVAL/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files.
-BOARDSRC = ${CHIBIOS}/boards/ST_STM32373C_EVAL/board.c
-
-# Required include directories
-BOARDINC = ${CHIBIOS}/boards/ST_STM32373C_EVAL
diff --git a/boards/ST_STM32373C_EVAL/cfg/board.chcfg b/boards/ST_STM32373C_EVAL/cfg/board.chcfg deleted file mode 100644 index 85f428ef8..000000000 --- a/boards/ST_STM32373C_EVAL/cfg/board.chcfg +++ /dev/null @@ -1,798 +0,0 @@ -<?xml version="1.0" encoding="UTF-8"?>
-<!-- STM32F3xx board Template -->
-<board
- xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
- xsi:noNamespaceSchemaLocation="http://www.chibios.org/xml/schema/boards/stm32f3xx_board.xsd">
- <configuration_settings>
- <templates_path>resources/gencfg/processors/boards/stm32f3xx/templates</templates_path>
- <output_path>..</output_path>
- </configuration_settings>
- <board_name>STMicroelectronics STM32373C-EVAL</board_name>
- <board_id>ST_STM32373C_EVAL</board_id>
- <board_functions></board_functions>
- <subtype>STM32F37X</subtype>
- <clocks HSEFrequency="8000000" HSEBypass="false" LSEFrequency="32768"
- LSEBypass="false" LSEDrive="3 High Drive (default)" />
- <ports>
- <GPIOA>
- <pin0
- ID="WKUP_BUTTON"
- Type="PushPull"
- Speed="Minimum"
- Resistor="Floating"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin1
- ID="LDR_OUT"
- Type="PushPull"
- Speed="Minimum"
- Resistor="Floating"
- Level="High"
- Mode="Analog"
- Alternate="0" />
- <pin2
- ID="KEY_BUTTON"
- Type="PushPull"
- Speed="Minimum"
- Resistor="Floating"
- Level="High"
- Mode="Input"
- Alternate="0" ></pin2>
- <pin3
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin4
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin5
- ID=""
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Input"
- Alternate="5" ></pin5>
- <pin6
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin7
- ID="COMP2_OUT"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="Low"
- Mode="Output"
- Alternate="0" />
- <pin8
- ID="I2C2_SMB"
- Type="PushPull"
- Speed="Minimum"
- Resistor="Floating"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin9
- ID="I2C2_SCL"
- Type="OpenDrain"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Alternate"
- Alternate="4" />
- <pin10
- ID="I2C2_SDA"
- Type="OpenDrain"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Alternate"
- Alternate="4" ></pin10>
- <pin11
- ID="USB_DM"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Alternate"
- Alternate="14" />
- <pin12
- ID="USB_DP"
- Type="PushPull"
- Speed="Minimum"
- Resistor="Floating"
- Level="High"
- Mode="Alternate"
- Alternate="14" ></pin12>
- <pin13
- ID="SWDIO"
- Type="PushPull"
- Speed="Maximum"
- Resistor="PullUp"
- Level="High"
- Mode="Alternate"
- Alternate="0" />
- <pin14
- ID="SWCLK"
- Type="PushPull"
- Speed="Maximum"
- Resistor="PullDown"
- Level="High"
- Mode="Alternate"
- Alternate="0" />
- <pin15
- ID="JTDI"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Alternate"
- Alternate="0" />
- </GPIOA>
- <GPIOB>
- <pin0
- ID="MIC_IN"
- Type="PushPull"
- Speed="Minimum"
- Resistor="Floating"
- Level="High"
- Mode="Analog"
- Alternate="0" />
- <pin1
- ID="ADC_POT_IN"
- Type="PushPull"
- Speed="Minimum"
- Resistor="Floating"
- Level="High"
- Mode="Analog"
- Alternate="0" />
- <pin2
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin3
- ID="SWO"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Alternate"
- Alternate="0" />
- <pin4
- ID="JTRST"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin5
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" ></pin5>
- <pin6
- ID="I2C1_SCL"
- Type="OpenDrain"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Alternate"
- Alternate="4" />
- <pin7
- ID="I2C1_SDA"
- Type="OpenDrain"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Alternate"
- Alternate="4" />
- <pin8
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin9
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin10
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin11
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin12
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin13
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin14
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin15
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- </GPIOB>
- <GPIOC>
- <pin0
- ID="LED1"
- Type="OpenDrain"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Output"
- Alternate="0" />
- <pin1
- ID="LED2"
- Type="OpenDrain"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Output"
- Alternate="0" />
- <pin2
- ID="LED3"
- Type="OpenDrain"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Output"
- Alternate="0" />
- <pin3
- ID="LED4"
- Type="OpenDrain"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Output"
- Alternate="0" ></pin3>
- <pin4
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin5
- ID="USB_DISCONNECT"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Output"
- Alternate="0" />
- <pin6
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin7
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin8
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin9
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin10
- ID="SPI3_SCK"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Alternate"
- Alternate="6" />
- <pin11
- ID="SPI3_MISO"
- Type="PushPull"
- Speed="Maximum"
- Resistor="PullUp"
- Level="High"
- Mode="Alternate"
- Alternate="6" />
- <pin12
- ID="SPI3_MOSI"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Alternate"
- Alternate="6" />
- <pin13
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin14
- ID="OSC32_IN"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin15
- ID="OSC32_OUT"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Input"
- Alternate="0" />
- </GPIOC>
- <GPIOD>
- <pin0
- ID="CAN_RX"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Alternate"
- Alternate="7" />
- <pin1
- ID="CAN_TX"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Alternate"
- Alternate="7" />
- <pin2
- ID="LCD_CS"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Output"
- Alternate="0" />
- <pin3
- ID="USART2_CTS"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Alternate"
- Alternate="7" ></pin3>
- <pin4
- ID="USART2_RST"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Alternate"
- Alternate="7" />
- <pin5
- ID="USART2_TX"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Alternate"
- Alternate="7" />
- <pin6
- ID="USART2_RX"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Alternate"
- Alternate="7" />
- <pin7
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin8
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin9
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin10
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin11
- ID="AUDIO_RST"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="Low"
- Mode="Output"
- Alternate="0" />
- <pin12
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin13
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin14
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin15
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- </GPIOD>
- <GPIOE>
- <pin0
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin1
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin2
- ID="SD_CS"
- Type="OpenDrain"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Output"
- Alternate="0" ></pin2>
- <pin3
- ID="SD_DETECT"
- Type="PushPull"
- Speed="Maximum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" ></pin3>
- <pin4
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin5
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" ></pin5>
- <pin6
- ID="JOY_SEL"
- Type="PushPull"
- Speed="Maximum"
- Resistor="PullDown"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin7
- ID="RTD_IN"
- Type="PushPull"
- Speed="Minimum"
- Resistor="Floating"
- Level="High"
- Mode="Analog"
- Alternate="0" />
- <pin8
- ID="PRESSUREP"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Analog"
- Alternate="0" />
- <pin9
- ID="PRESSUREN"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Analog"
- Alternate="0" />
- <pin10
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" ></pin10>
- <pin11
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin12
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin13
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="Low"
- Mode="Input"
- Alternate="0" ></pin13>
- <pin14
- ID="PRESSURE_TEPM"
- Type="PushPull"
- Speed="Minimum"
- Resistor="Floating"
- Level="Low"
- Mode="Input"
- Alternate="0" />
- <pin15
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="Low"
- Mode="Input"
- Alternate="0" />
- </GPIOE>
- <GPIOF>
- <pin0
- ID="OSC_IN"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin1
- ID="OSC_OUT"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Input"
- Alternate="0" ></pin1>
- <pin2
- ID="JOY_DOWN"
- Type="PushPull"
- Speed="Maximum"
- Resistor="PullDown"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin3
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" ></pin3>
- <pin4
- ID="JOY_LEFT"
- Type="PushPull"
- Speed="Maximum"
- Resistor="PullDown"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin5
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin6
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin7
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin8
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin9
- ID="JOY_RIGHT"
- Type="PushPull"
- Speed="Maximum"
- Resistor="PullDown"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin10
- ID="JOY_UP"
- Type="PushPull"
- Speed="Maximum"
- Resistor="PullDown"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin11
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin12
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin13
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin14
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin15
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- </GPIOF>
- </ports>
-</board>
diff --git a/boards/ST_STM32F0_DISCOVERY/board.c b/boards/ST_STM32F0_DISCOVERY/board.c deleted file mode 100644 index 0393835ad..000000000 --- a/boards/ST_STM32F0_DISCOVERY/board.c +++ /dev/null @@ -1,78 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-/**
- * @brief PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- * This variable is used by the HAL when initializing the PAL driver.
- */
-const PALConfig pal_default_config =
-{
- {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
- VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH},
- {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
- VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH},
- {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
- VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH},
- {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
- VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH},
- {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
- VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH}
-};
-#endif
-
-/**
- * @brief Early initialization code.
- * @details This initialization must be performed just after stack setup
- * and before any other initialization.
- */
-void __early_init(void) {
-
- stm32_clock_init();
-}
-
-#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
-/**
- * @brief MMC_SPI card detection.
- */
-bool_t mmc_lld_is_card_inserted(MMCDriver *mmcp) {
-
- (void)mmcp;
- /* TODO: Fill the implementation.*/
- return TRUE;
-}
-
-/**
- * @brief MMC_SPI card write protection detection.
- */
-bool_t mmc_lld_is_write_protected(MMCDriver *mmcp) {
-
- (void)mmcp;
- /* TODO: Fill the implementation.*/
- return FALSE;
-}
-#endif
-
-/**
- * @brief Board-specific initialization code.
- * @todo Add your board-specific code, if any.
- */
-void boardInit(void) {
-}
diff --git a/boards/ST_STM32F0_DISCOVERY/board.h b/boards/ST_STM32F0_DISCOVERY/board.h deleted file mode 100644 index 088cf38e3..000000000 --- a/boards/ST_STM32F0_DISCOVERY/board.h +++ /dev/null @@ -1,757 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for ST STM32F0-Discovery board.
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_ST_STM32F0_DISCOVERY
-#define BOARD_NAME "ST STM32F0-Discovery"
-
-/*
- * Board oscillators-related settings.
- * NOTE: LSE not fitted.
- * NOTE: HSE not fitted.
- */
-#if !defined(STM32_LSECLK)
-#define STM32_LSECLK 0
-#endif
-
-#define STM32_LSEDRV (3 << 3)
-
-#if !defined(STM32_HSECLK)
-#define STM32_HSECLK 0
-#endif
-
-#define STM32_HSE_BYPASS
-
-/*
- * MCU type as defined in the ST header file stm32f0xx.h.
- */
-#define STM32F0XX
-
-/*
- * IO pins assignments.
- */
-#define GPIOA_BUTTON 0
-#define GPIOA_PIN1 1
-#define GPIOA_PIN2 2
-#define GPIOA_PIN3 3
-#define GPIOA_PIN4 4
-#define GPIOA_PIN5 5
-#define GPIOA_PIN6 6
-#define GPIOA_PIN7 7
-#define GPIOA_PIN8 8
-#define GPIOA_PIN9 9
-#define GPIOA_PIN10 10
-#define GPIOA_PIN11 11
-#define GPIOA_PIN12 12
-#define GPIOA_SWDAT 13
-#define GPIOA_SWCLK 14
-#define GPIOA_PIN15 15
-
-#define GPIOB_PIN0 0
-#define GPIOB_PIN1 1
-#define GPIOB_PIN2 2
-#define GPIOB_PIN3 3
-#define GPIOB_PIN4 4
-#define GPIOB_PIN5 5
-#define GPIOB_PIN6 6
-#define GPIOB_PIN7 7
-#define GPIOB_PIN8 8
-#define GPIOB_PIN9 9
-#define GPIOB_PIN10 10
-#define GPIOB_PIN11 11
-#define GPIOB_PIN12 12
-#define GPIOB_PIN13 13
-#define GPIOB_PIN14 14
-#define GPIOB_PIN15 15
-
-#define GPIOC_PIN0 0
-#define GPIOC_PIN1 1
-#define GPIOC_PIN2 2
-#define GPIOC_PIN3 3
-#define GPIOC_PIN4 4
-#define GPIOC_PIN5 5
-#define GPIOC_PIN6 6
-#define GPIOC_PIN7 7
-#define GPIOC_LED4 8
-#define GPIOC_LED3 9
-#define GPIOC_PIN10 10
-#define GPIOC_PIN11 11
-#define GPIOC_PIN12 12
-#define GPIOC_PIN13 13
-#define GPIOC_OSC32_IN 14
-#define GPIOC_OSC32_OUT 15
-
-#define GPIOD_PIN0 0
-#define GPIOD_PIN1 1
-#define GPIOD_PIN2 2
-#define GPIOD_PIN3 3
-#define GPIOD_PIN4 4
-#define GPIOD_PIN5 5
-#define GPIOD_PIN6 6
-#define GPIOD_PIN7 7
-#define GPIOD_PIN8 8
-#define GPIOD_PIN9 9
-#define GPIOD_PIN10 10
-#define GPIOD_PIN11 11
-#define GPIOD_PIN12 12
-#define GPIOD_PIN13 13
-#define GPIOD_PIN14 14
-#define GPIOD_PIN15 15
-
-#define GPIOF_OSC_IN 0
-#define GPIOF_OSC_OUT 1
-#define GPIOF_PIN2 2
-#define GPIOF_PIN3 3
-#define GPIOF_PIN4 4
-#define GPIOF_PIN5 5
-#define GPIOF_PIN6 6
-#define GPIOF_PIN7 7
-#define GPIOF_PIN8 8
-#define GPIOF_PIN9 9
-#define GPIOF_PIN10 10
-#define GPIOF_PIN11 11
-#define GPIOF_PIN12 12
-#define GPIOF_PIN13 13
-#define GPIOF_PIN14 14
-#define GPIOF_PIN15 15
-
-/*
- * I/O ports initial setup, this configuration is established soon after reset
- * in the initialization code.
- * Please refer to the STM32 Reference Manual for details.
- */
-#define PIN_MODE_INPUT(n) (0U << ((n) * 2))
-#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2))
-#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2))
-#define PIN_MODE_ANALOG(n) (3U << ((n) * 2))
-#define PIN_ODR_LOW(n) (0U << (n))
-#define PIN_ODR_HIGH(n) (1U << (n))
-#define PIN_OTYPE_PUSHPULL(n) (0U << (n))
-#define PIN_OTYPE_OPENDRAIN(n) (1U << (n))
-#define PIN_OSPEED_2M(n) (0U << ((n) * 2))
-#define PIN_OSPEED_10M(n) (1U << ((n) * 2))
-#define PIN_OSPEED_40M(n) (3U << ((n) * 2))
-#define PIN_PUPDR_FLOATING(n) (0U << ((n) * 2))
-#define PIN_PUPDR_PULLUP(n) (1U << ((n) * 2))
-#define PIN_PUPDR_PULLDOWN(n) (2U << ((n) * 2))
-#define PIN_AFIO_AF(n, v) ((v##U) << ((n % 8) * 4))
-
-/*
- * GPIOA setup:
- *
- * PA0 - BUTTON (input floating).
- * PA1 - PIN1 (input pullup).
- * PA2 - PIN2 (input pullup).
- * PA3 - PIN3 (input pullup).
- * PA4 - PIN4 (input pullup).
- * PA5 - PIN5 (input pullup).
- * PA6 - PIN6 (input pullup).
- * PA7 - PIN7 (input pullup).
- * PA8 - PIN8 (input pullup).
- * PA9 - PIN9 (input pullup).
- * PA10 - PIN10 (input pullup).
- * PA11 - PIN11 (input pullup).
- * PA12 - PIN12 (input pullup).
- * PA13 - SWDAT (alternate 0).
- * PA14 - SWCLK (alternate 0).
- * PA15 - PIN15 (input pullup).
- */
-#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_BUTTON) | \
- PIN_MODE_INPUT(GPIOA_PIN1) | \
- PIN_MODE_INPUT(GPIOA_PIN2) | \
- PIN_MODE_INPUT(GPIOA_PIN3) | \
- PIN_MODE_INPUT(GPIOA_PIN4) | \
- PIN_MODE_INPUT(GPIOA_PIN5) | \
- PIN_MODE_INPUT(GPIOA_PIN6) | \
- PIN_MODE_INPUT(GPIOA_PIN7) | \
- PIN_MODE_INPUT(GPIOA_PIN8) | \
- PIN_MODE_INPUT(GPIOA_PIN9) | \
- PIN_MODE_INPUT(GPIOA_PIN10) | \
- PIN_MODE_INPUT(GPIOA_PIN11) | \
- PIN_MODE_INPUT(GPIOA_PIN12) | \
- PIN_MODE_ALTERNATE(GPIOA_SWDAT) | \
- PIN_MODE_ALTERNATE(GPIOA_SWCLK) | \
- PIN_MODE_INPUT(GPIOA_PIN15))
-#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN4) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN5) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN6) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN7) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN9) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN10) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN11) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN12) | \
- PIN_OTYPE_PUSHPULL(GPIOA_SWDAT) | \
- PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN15))
-#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_2M(GPIOA_BUTTON) | \
- PIN_OSPEED_2M(GPIOA_PIN1) | \
- PIN_OSPEED_2M(GPIOA_PIN2) | \
- PIN_OSPEED_2M(GPIOA_PIN3) | \
- PIN_OSPEED_2M(GPIOA_PIN4) | \
- PIN_OSPEED_2M(GPIOA_PIN5) | \
- PIN_OSPEED_2M(GPIOA_PIN6) | \
- PIN_OSPEED_2M(GPIOA_PIN7) | \
- PIN_OSPEED_2M(GPIOA_PIN8) | \
- PIN_OSPEED_2M(GPIOA_PIN9) | \
- PIN_OSPEED_2M(GPIOA_PIN10) | \
- PIN_OSPEED_2M(GPIOA_PIN11) | \
- PIN_OSPEED_2M(GPIOA_PIN12) | \
- PIN_OSPEED_40M(GPIOA_SWDAT) | \
- PIN_OSPEED_40M(GPIOA_SWCLK) | \
- PIN_OSPEED_40M(GPIOA_PIN15))
-#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_BUTTON) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN1) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN2) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN3) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN4) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN5) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN6) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN7) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN8) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN9) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN10) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN11) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN12) | \
- PIN_PUPDR_PULLUP(GPIOA_SWDAT) | \
- PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN15))
-#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_BUTTON) | \
- PIN_ODR_HIGH(GPIOA_PIN1) | \
- PIN_ODR_HIGH(GPIOA_PIN2) | \
- PIN_ODR_HIGH(GPIOA_PIN3) | \
- PIN_ODR_HIGH(GPIOA_PIN4) | \
- PIN_ODR_HIGH(GPIOA_PIN5) | \
- PIN_ODR_HIGH(GPIOA_PIN6) | \
- PIN_ODR_HIGH(GPIOA_PIN7) | \
- PIN_ODR_HIGH(GPIOA_PIN8) | \
- PIN_ODR_HIGH(GPIOA_PIN9) | \
- PIN_ODR_HIGH(GPIOA_PIN10) | \
- PIN_ODR_HIGH(GPIOA_PIN11) | \
- PIN_ODR_HIGH(GPIOA_PIN12) | \
- PIN_ODR_HIGH(GPIOA_SWDAT) | \
- PIN_ODR_HIGH(GPIOA_SWCLK) | \
- PIN_ODR_HIGH(GPIOA_PIN15))
-#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_BUTTON, 0) | \
- PIN_AFIO_AF(GPIOA_PIN1, 0) | \
- PIN_AFIO_AF(GPIOA_PIN2, 0) | \
- PIN_AFIO_AF(GPIOA_PIN3, 0) | \
- PIN_AFIO_AF(GPIOA_PIN4, 0) | \
- PIN_AFIO_AF(GPIOA_PIN5, 0) | \
- PIN_AFIO_AF(GPIOA_PIN6, 0) | \
- PIN_AFIO_AF(GPIOA_PIN7, 0))
-#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0) | \
- PIN_AFIO_AF(GPIOA_PIN9, 0) | \
- PIN_AFIO_AF(GPIOA_PIN10, 0) | \
- PIN_AFIO_AF(GPIOA_PIN11, 0) | \
- PIN_AFIO_AF(GPIOA_PIN12, 0) | \
- PIN_AFIO_AF(GPIOA_SWDAT, 0) | \
- PIN_AFIO_AF(GPIOA_SWCLK, 0) | \
- PIN_AFIO_AF(GPIOA_PIN15, 0))
-
-/*
- * GPIOB setup:
- *
- * PB0 - PIN0 (input pullup).
- * PB1 - PIN1 (input pullup).
- * PB2 - PIN2 (input pullup).
- * PB3 - PIN3 (input pullup).
- * PB4 - PIN4 (input pullup).
- * PB5 - PIN5 (input pullup).
- * PB6 - PIN6 (input pullup).
- * PB7 - PIN7 (input pullup).
- * PB8 - PIN8 (input pullup).
- * PB9 - PIN9 (input pullup).
- * PB10 - PIN10 (input pullup).
- * PB11 - PIN11 (input pullup).
- * PB12 - PIN12 (input pullup).
- * PB13 - PIN13 (input pullup).
- * PB14 - PIN14 (input pullup).
- * PB15 - PIN15 (input pullup).
- */
-#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | \
- PIN_MODE_INPUT(GPIOB_PIN1) | \
- PIN_MODE_INPUT(GPIOB_PIN2) | \
- PIN_MODE_INPUT(GPIOB_PIN3) | \
- PIN_MODE_INPUT(GPIOB_PIN4) | \
- PIN_MODE_INPUT(GPIOB_PIN5) | \
- PIN_MODE_INPUT(GPIOB_PIN6) | \
- PIN_MODE_INPUT(GPIOB_PIN7) | \
- PIN_MODE_INPUT(GPIOB_PIN8) | \
- PIN_MODE_INPUT(GPIOB_PIN9) | \
- PIN_MODE_INPUT(GPIOB_PIN10) | \
- PIN_MODE_INPUT(GPIOB_PIN11) | \
- PIN_MODE_INPUT(GPIOB_PIN12) | \
- PIN_MODE_INPUT(GPIOB_PIN13) | \
- PIN_MODE_INPUT(GPIOB_PIN14) | \
- PIN_MODE_INPUT(GPIOB_PIN15))
-#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN3) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN4) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN6) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN9) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN10) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN13) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN14) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN15))
-#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_2M(GPIOB_PIN0) | \
- PIN_OSPEED_2M(GPIOB_PIN1) | \
- PIN_OSPEED_40M(GPIOB_PIN2) | \
- PIN_OSPEED_40M(GPIOB_PIN3) | \
- PIN_OSPEED_40M(GPIOB_PIN4) | \
- PIN_OSPEED_2M(GPIOB_PIN5) | \
- PIN_OSPEED_2M(GPIOB_PIN6) | \
- PIN_OSPEED_2M(GPIOB_PIN7) | \
- PIN_OSPEED_2M(GPIOB_PIN8) | \
- PIN_OSPEED_2M(GPIOB_PIN9) | \
- PIN_OSPEED_2M(GPIOB_PIN10) | \
- PIN_OSPEED_2M(GPIOB_PIN11) | \
- PIN_OSPEED_2M(GPIOB_PIN12) | \
- PIN_OSPEED_2M(GPIOB_PIN13) | \
- PIN_OSPEED_2M(GPIOB_PIN14) | \
- PIN_OSPEED_2M(GPIOB_PIN15))
-#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN1) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN2) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN3) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN4) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN5) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN6) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN7) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN8) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN9) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN10) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN11) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN12) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN13) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN14) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN15))
-#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | \
- PIN_ODR_HIGH(GPIOB_PIN1) | \
- PIN_ODR_HIGH(GPIOB_PIN2) | \
- PIN_ODR_HIGH(GPIOB_PIN3) | \
- PIN_ODR_HIGH(GPIOB_PIN4) | \
- PIN_ODR_HIGH(GPIOB_PIN5) | \
- PIN_ODR_HIGH(GPIOB_PIN6) | \
- PIN_ODR_HIGH(GPIOB_PIN7) | \
- PIN_ODR_HIGH(GPIOB_PIN8) | \
- PIN_ODR_HIGH(GPIOB_PIN9) | \
- PIN_ODR_HIGH(GPIOB_PIN10) | \
- PIN_ODR_HIGH(GPIOB_PIN11) | \
- PIN_ODR_HIGH(GPIOB_PIN12) | \
- PIN_ODR_HIGH(GPIOB_PIN13) | \
- PIN_ODR_HIGH(GPIOB_PIN14) | \
- PIN_ODR_HIGH(GPIOB_PIN15))
-#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0) | \
- PIN_AFIO_AF(GPIOB_PIN1, 0) | \
- PIN_AFIO_AF(GPIOB_PIN2, 0) | \
- PIN_AFIO_AF(GPIOB_PIN3, 0) | \
- PIN_AFIO_AF(GPIOB_PIN4, 0) | \
- PIN_AFIO_AF(GPIOB_PIN5, 0) | \
- PIN_AFIO_AF(GPIOB_PIN6, 0) | \
- PIN_AFIO_AF(GPIOB_PIN7, 0))
-#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0) | \
- PIN_AFIO_AF(GPIOB_PIN9, 0) | \
- PIN_AFIO_AF(GPIOB_PIN10, 0) | \
- PIN_AFIO_AF(GPIOB_PIN11, 0) | \
- PIN_AFIO_AF(GPIOB_PIN12, 0) | \
- PIN_AFIO_AF(GPIOB_PIN13, 0) | \
- PIN_AFIO_AF(GPIOB_PIN14, 0) | \
- PIN_AFIO_AF(GPIOB_PIN15, 0))
-
-/*
- * GPIOC setup:
- *
- * PC0 - PIN0 (input pullup).
- * PC1 - PIN1 (input pullup).
- * PC2 - PIN2 (input pullup).
- * PC3 - PIN3 (input pullup).
- * PC4 - PIN4 (input pullup).
- * PC5 - PIN5 (input pullup).
- * PC6 - PIN6 (input pullup).
- * PC7 - PIN7 (input pullup).
- * PC8 - LED4 (output pushpull maximum).
- * PC9 - LED3 (output pushpull maximum).
- * PC10 - PIN10 (input pullup).
- * PC11 - PIN11 (input pullup).
- * PC12 - PIN12 (input pullup).
- * PC13 - PIN13 (input pullup).
- * PC14 - OSC32_IN (input floating).
- * PC15 - OSC32_OUT (input floating).
- */
-#define VAL_GPIOC_MODER (PIN_MODE_INPUT(GPIOC_PIN0) | \
- PIN_MODE_INPUT(GPIOC_PIN1) | \
- PIN_MODE_INPUT(GPIOC_PIN2) | \
- PIN_MODE_INPUT(GPIOC_PIN3) | \
- PIN_MODE_INPUT(GPIOC_PIN4) | \
- PIN_MODE_INPUT(GPIOC_PIN5) | \
- PIN_MODE_INPUT(GPIOC_PIN6) | \
- PIN_MODE_INPUT(GPIOC_PIN7) | \
- PIN_MODE_OUTPUT(GPIOC_LED4) | \
- PIN_MODE_OUTPUT(GPIOC_LED3) | \
- PIN_MODE_INPUT(GPIOC_PIN10) | \
- PIN_MODE_INPUT(GPIOC_PIN11) | \
- PIN_MODE_INPUT(GPIOC_PIN12) | \
- PIN_MODE_INPUT(GPIOC_PIN13) | \
- PIN_MODE_INPUT(GPIOC_OSC32_IN) | \
- PIN_MODE_INPUT(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_PIN0) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN3) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN6) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN7) | \
- PIN_OTYPE_PUSHPULL(GPIOC_LED4) | \
- PIN_OTYPE_PUSHPULL(GPIOC_LED3) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN10) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | \
- PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) | \
- PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_2M(GPIOC_PIN0) | \
- PIN_OSPEED_2M(GPIOC_PIN1) | \
- PIN_OSPEED_2M(GPIOC_PIN2) | \
- PIN_OSPEED_2M(GPIOC_PIN3) | \
- PIN_OSPEED_2M(GPIOC_PIN4) | \
- PIN_OSPEED_2M(GPIOC_PIN5) | \
- PIN_OSPEED_2M(GPIOC_PIN6) | \
- PIN_OSPEED_2M(GPIOC_PIN7) | \
- PIN_OSPEED_40M(GPIOC_LED4) | \
- PIN_OSPEED_40M(GPIOC_LED3) | \
- PIN_OSPEED_2M(GPIOC_PIN10) | \
- PIN_OSPEED_2M(GPIOC_PIN11) | \
- PIN_OSPEED_2M(GPIOC_PIN12) | \
- PIN_OSPEED_2M(GPIOC_PIN13) | \
- PIN_OSPEED_40M(GPIOC_OSC32_IN) | \
- PIN_OSPEED_40M(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_PUPDR (PIN_PUPDR_PULLUP(GPIOC_PIN0) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN1) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN2) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN3) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN4) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN5) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN6) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN7) | \
- PIN_PUPDR_FLOATING(GPIOC_LED4) | \
- PIN_PUPDR_FLOATING(GPIOC_LED3) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN10) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN11) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN12) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN13) | \
- PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) | \
- PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_PIN0) | \
- PIN_ODR_HIGH(GPIOC_PIN1) | \
- PIN_ODR_HIGH(GPIOC_PIN2) | \
- PIN_ODR_HIGH(GPIOC_PIN3) | \
- PIN_ODR_HIGH(GPIOC_PIN4) | \
- PIN_ODR_HIGH(GPIOC_PIN5) | \
- PIN_ODR_HIGH(GPIOC_PIN6) | \
- PIN_ODR_HIGH(GPIOC_PIN7) | \
- PIN_ODR_LOW(GPIOC_LED4) | \
- PIN_ODR_LOW(GPIOC_LED3) | \
- PIN_ODR_HIGH(GPIOC_PIN10) | \
- PIN_ODR_HIGH(GPIOC_PIN11) | \
- PIN_ODR_HIGH(GPIOC_PIN12) | \
- PIN_ODR_HIGH(GPIOC_PIN13) | \
- PIN_ODR_HIGH(GPIOC_OSC32_IN) | \
- PIN_ODR_HIGH(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_PIN0, 0) | \
- PIN_AFIO_AF(GPIOC_PIN1, 0) | \
- PIN_AFIO_AF(GPIOC_PIN2, 0) | \
- PIN_AFIO_AF(GPIOC_PIN3, 0) | \
- PIN_AFIO_AF(GPIOC_PIN4, 0) | \
- PIN_AFIO_AF(GPIOC_PIN5, 0) | \
- PIN_AFIO_AF(GPIOC_PIN6, 0) | \
- PIN_AFIO_AF(GPIOC_PIN7, 0))
-#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_LED4, 0) | \
- PIN_AFIO_AF(GPIOC_LED3, 0) | \
- PIN_AFIO_AF(GPIOC_PIN10, 0) | \
- PIN_AFIO_AF(GPIOC_PIN11, 0) | \
- PIN_AFIO_AF(GPIOC_PIN12, 0) | \
- PIN_AFIO_AF(GPIOC_PIN13, 0) | \
- PIN_AFIO_AF(GPIOC_OSC32_IN, 0) | \
- PIN_AFIO_AF(GPIOC_OSC32_OUT, 0))
-
-/*
- * GPIOD setup:
- *
- * PD0 - PIN0 (input pullup).
- * PD1 - PIN1 (input pullup).
- * PD2 - PIN2 (input pullup).
- * PD3 - PIN3 (input pullup).
- * PD4 - PIN4 (input pullup).
- * PD5 - PIN5 (input pullup).
- * PD6 - PIN6 (input pullup).
- * PD7 - PIN7 (input pullup).
- * PD8 - PIN8 (input pullup).
- * PD9 - PIN9 (input pullup).
- * PD10 - PIN10 (input pullup).
- * PD11 - PIN11 (input pullup).
- * PD12 - PIN12 (input pullup).
- * PD13 - PIN13 (input pullup).
- * PD14 - PIN14 (input pullup).
- * PD15 - PIN15 (input pullup).
- */
-#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | \
- PIN_MODE_INPUT(GPIOD_PIN1) | \
- PIN_MODE_INPUT(GPIOD_PIN2) | \
- PIN_MODE_INPUT(GPIOD_PIN3) | \
- PIN_MODE_INPUT(GPIOD_PIN4) | \
- PIN_MODE_INPUT(GPIOD_PIN5) | \
- PIN_MODE_INPUT(GPIOD_PIN6) | \
- PIN_MODE_INPUT(GPIOD_PIN7) | \
- PIN_MODE_INPUT(GPIOD_PIN8) | \
- PIN_MODE_INPUT(GPIOD_PIN9) | \
- PIN_MODE_INPUT(GPIOD_PIN10) | \
- PIN_MODE_INPUT(GPIOD_PIN11) | \
- PIN_MODE_INPUT(GPIOD_PIN12) | \
- PIN_MODE_INPUT(GPIOD_PIN13) | \
- PIN_MODE_INPUT(GPIOD_PIN14) | \
- PIN_MODE_INPUT(GPIOD_PIN15))
-#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN4) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN5) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN15))
-#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_2M(GPIOD_PIN0) | \
- PIN_OSPEED_2M(GPIOD_PIN1) | \
- PIN_OSPEED_2M(GPIOD_PIN2) | \
- PIN_OSPEED_2M(GPIOD_PIN3) | \
- PIN_OSPEED_2M(GPIOD_PIN4) | \
- PIN_OSPEED_2M(GPIOD_PIN5) | \
- PIN_OSPEED_2M(GPIOD_PIN6) | \
- PIN_OSPEED_2M(GPIOD_PIN7) | \
- PIN_OSPEED_2M(GPIOD_PIN8) | \
- PIN_OSPEED_2M(GPIOD_PIN9) | \
- PIN_OSPEED_2M(GPIOD_PIN10) | \
- PIN_OSPEED_2M(GPIOD_PIN11) | \
- PIN_OSPEED_2M(GPIOD_PIN12) | \
- PIN_OSPEED_2M(GPIOD_PIN13) | \
- PIN_OSPEED_2M(GPIOD_PIN14) | \
- PIN_OSPEED_2M(GPIOD_PIN15))
-#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN1) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN2) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN3) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN4) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN5) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN6) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN7) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN8) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN9) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN10) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN11) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN12) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN13) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN14) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN15))
-#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | \
- PIN_ODR_HIGH(GPIOD_PIN1) | \
- PIN_ODR_HIGH(GPIOD_PIN2) | \
- PIN_ODR_HIGH(GPIOD_PIN3) | \
- PIN_ODR_HIGH(GPIOD_PIN4) | \
- PIN_ODR_HIGH(GPIOD_PIN5) | \
- PIN_ODR_HIGH(GPIOD_PIN6) | \
- PIN_ODR_HIGH(GPIOD_PIN7) | \
- PIN_ODR_HIGH(GPIOD_PIN8) | \
- PIN_ODR_HIGH(GPIOD_PIN9) | \
- PIN_ODR_HIGH(GPIOD_PIN10) | \
- PIN_ODR_HIGH(GPIOD_PIN11) | \
- PIN_ODR_HIGH(GPIOD_PIN12) | \
- PIN_ODR_HIGH(GPIOD_PIN13) | \
- PIN_ODR_HIGH(GPIOD_PIN14) | \
- PIN_ODR_HIGH(GPIOD_PIN15))
-#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0) | \
- PIN_AFIO_AF(GPIOD_PIN1, 0) | \
- PIN_AFIO_AF(GPIOD_PIN2, 0) | \
- PIN_AFIO_AF(GPIOD_PIN3, 0) | \
- PIN_AFIO_AF(GPIOD_PIN4, 0) | \
- PIN_AFIO_AF(GPIOD_PIN5, 0) | \
- PIN_AFIO_AF(GPIOD_PIN6, 0) | \
- PIN_AFIO_AF(GPIOD_PIN7, 0))
-#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0) | \
- PIN_AFIO_AF(GPIOD_PIN9, 0) | \
- PIN_AFIO_AF(GPIOD_PIN10, 0) | \
- PIN_AFIO_AF(GPIOD_PIN11, 0) | \
- PIN_AFIO_AF(GPIOD_PIN12, 0) | \
- PIN_AFIO_AF(GPIOD_PIN13, 0) | \
- PIN_AFIO_AF(GPIOD_PIN14, 0) | \
- PIN_AFIO_AF(GPIOD_PIN15, 0))
-
-/*
- * GPIOF setup:
- *
- * PF0 - OSC_IN (input floating).
- * PF1 - OSC_OUT (input floating).
- * PF2 - PIN2 (input pullup).
- * PF3 - PIN3 (input pullup).
- * PF4 - PIN4 (input pullup).
- * PF5 - PIN5 (input pullup).
- * PF6 - PIN6 (input pullup).
- * PF7 - PIN7 (input pullup).
- * PF8 - PIN8 (input pullup).
- * PF9 - PIN9 (input pullup).
- * PF10 - PIN10 (input pullup).
- * PF11 - PIN11 (input pullup).
- * PF12 - PIN12 (input pullup).
- * PF13 - PIN13 (input pullup).
- * PF14 - PIN14 (input pullup).
- * PF15 - PIN15 (input pullup).
- */
-#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_OSC_IN) | \
- PIN_MODE_INPUT(GPIOF_OSC_OUT) | \
- PIN_MODE_INPUT(GPIOF_PIN2) | \
- PIN_MODE_INPUT(GPIOF_PIN3) | \
- PIN_MODE_INPUT(GPIOF_PIN4) | \
- PIN_MODE_INPUT(GPIOF_PIN5) | \
- PIN_MODE_INPUT(GPIOF_PIN6) | \
- PIN_MODE_INPUT(GPIOF_PIN7) | \
- PIN_MODE_INPUT(GPIOF_PIN8) | \
- PIN_MODE_INPUT(GPIOF_PIN9) | \
- PIN_MODE_INPUT(GPIOF_PIN10) | \
- PIN_MODE_INPUT(GPIOF_PIN11) | \
- PIN_MODE_INPUT(GPIOF_PIN12) | \
- PIN_MODE_INPUT(GPIOF_PIN13) | \
- PIN_MODE_INPUT(GPIOF_PIN14) | \
- PIN_MODE_INPUT(GPIOF_PIN15))
-#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_OSC_IN) | \
- PIN_OTYPE_PUSHPULL(GPIOF_OSC_OUT) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN15))
-#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_2M(GPIOF_OSC_IN) | \
- PIN_OSPEED_2M(GPIOF_OSC_OUT) | \
- PIN_OSPEED_2M(GPIOF_PIN2) | \
- PIN_OSPEED_2M(GPIOF_PIN3) | \
- PIN_OSPEED_2M(GPIOF_PIN4) | \
- PIN_OSPEED_2M(GPIOF_PIN5) | \
- PIN_OSPEED_2M(GPIOF_PIN6) | \
- PIN_OSPEED_2M(GPIOF_PIN7) | \
- PIN_OSPEED_2M(GPIOF_PIN8) | \
- PIN_OSPEED_2M(GPIOF_PIN9) | \
- PIN_OSPEED_2M(GPIOF_PIN10) | \
- PIN_OSPEED_2M(GPIOF_PIN11) | \
- PIN_OSPEED_2M(GPIOF_PIN12) | \
- PIN_OSPEED_2M(GPIOF_PIN13) | \
- PIN_OSPEED_2M(GPIOF_PIN14) | \
- PIN_OSPEED_2M(GPIOF_PIN15))
-#define VAL_GPIOF_PUPDR (PIN_PUPDR_FLOATING(GPIOF_OSC_IN) | \
- PIN_PUPDR_FLOATING(GPIOF_OSC_OUT) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN2) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN3) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN4) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN5) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN6) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN7) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN8) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN9) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN10) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN11) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN12) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN13) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN14) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN15))
-#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_OSC_IN) | \
- PIN_ODR_HIGH(GPIOF_OSC_OUT) | \
- PIN_ODR_HIGH(GPIOF_PIN2) | \
- PIN_ODR_HIGH(GPIOF_PIN3) | \
- PIN_ODR_HIGH(GPIOF_PIN4) | \
- PIN_ODR_HIGH(GPIOF_PIN5) | \
- PIN_ODR_HIGH(GPIOF_PIN6) | \
- PIN_ODR_HIGH(GPIOF_PIN7) | \
- PIN_ODR_HIGH(GPIOF_PIN8) | \
- PIN_ODR_HIGH(GPIOF_PIN9) | \
- PIN_ODR_HIGH(GPIOF_PIN10) | \
- PIN_ODR_HIGH(GPIOF_PIN11) | \
- PIN_ODR_HIGH(GPIOF_PIN12) | \
- PIN_ODR_HIGH(GPIOF_PIN13) | \
- PIN_ODR_HIGH(GPIOF_PIN14) | \
- PIN_ODR_HIGH(GPIOF_PIN15))
-#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_OSC_IN, 0) | \
- PIN_AFIO_AF(GPIOF_OSC_OUT, 0) | \
- PIN_AFIO_AF(GPIOF_PIN2, 0) | \
- PIN_AFIO_AF(GPIOF_PIN3, 0) | \
- PIN_AFIO_AF(GPIOF_PIN4, 0) | \
- PIN_AFIO_AF(GPIOF_PIN5, 0) | \
- PIN_AFIO_AF(GPIOF_PIN6, 0) | \
- PIN_AFIO_AF(GPIOF_PIN7, 0))
-#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0) | \
- PIN_AFIO_AF(GPIOF_PIN9, 0) | \
- PIN_AFIO_AF(GPIOF_PIN10, 0) | \
- PIN_AFIO_AF(GPIOF_PIN11, 0) | \
- PIN_AFIO_AF(GPIOF_PIN12, 0) | \
- PIN_AFIO_AF(GPIOF_PIN13, 0) | \
- PIN_AFIO_AF(GPIOF_PIN14, 0) | \
- PIN_AFIO_AF(GPIOF_PIN15, 0))
-
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
diff --git a/boards/ST_STM32F0_DISCOVERY/board.mk b/boards/ST_STM32F0_DISCOVERY/board.mk deleted file mode 100644 index 144ae4963..000000000 --- a/boards/ST_STM32F0_DISCOVERY/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files.
-BOARDSRC = ${CHIBIOS}/boards/ST_STM32F0_DISCOVERY/board.c
-
-# Required include directories
-BOARDINC = ${CHIBIOS}/boards/ST_STM32F0_DISCOVERY
diff --git a/boards/ST_STM32F0_DISCOVERY/cfg/board.chcfg b/boards/ST_STM32F0_DISCOVERY/cfg/board.chcfg deleted file mode 100644 index 3773f03d1..000000000 --- a/boards/ST_STM32F0_DISCOVERY/cfg/board.chcfg +++ /dev/null @@ -1,667 +0,0 @@ -<?xml version="1.0" encoding="UTF-8"?> -<!-- STM32F0xx board Template --> -<board - xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" - xsi:noNamespaceSchemaLocation="http://www.chibios.org/xml/schema/boards/stm32f0xx_board.xsd"> - <configuration_settings> - <templates_path>resources/gencfg/processors/boards/stm32f0xx/templates</templates_path> - <output_path>..</output_path> - </configuration_settings> - <board_name>ST STM32F0-Discovery</board_name> - <board_id>ST_STM32F0_DISCOVERY</board_id> - <board_functions></board_functions> - <clocks HSEFrequency="0" HSEBypass="true" LSEFrequency="0" - LSEBypass="false" LSEDrive="3 High Drive (default)" /> - <ports> - <GPIOA> - <pin0 - ID="BUTTON" - Type="PushPull" - Speed="Minimum" - Resistor="Floating" - Level="High" - Mode="Input" - Alternate="0" /> - <pin1 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin4 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin6 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin7 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin8 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin9 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin11 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin12 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin13 - ID="SWDAT" - Type="PushPull" - Speed="Maximum" - Resistor="PullUp" - Level="High" - Mode="Alternate" - Alternate="0" /> - <pin14 - ID="SWCLK" - Type="PushPull" - Speed="Maximum" - Resistor="PullDown" - Level="High" - Mode="Alternate" - Alternate="0" /> - <pin15 - ID="" - Type="PushPull" - Speed="Maximum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - </GPIOA> - <GPIOB> - <pin0 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin1 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Speed="Maximum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Speed="Maximum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin4 - ID="" - Type="PushPull" - Speed="Maximum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin6 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin7 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin8 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin9 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin11 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin12 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin13 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin14 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin15 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - </GPIOB> - <GPIOC> - <pin0 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin1 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin4 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin6 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin7 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin8 - ID="LED4" - Type="PushPull" - Speed="Maximum" - Resistor="Floating" - Level="Low" - Mode="Output" - Alternate="0" /> - <pin9 - ID="LED3" - Type="PushPull" - Speed="Maximum" - Resistor="Floating" - Level="Low" - Mode="Output" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin11 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin12 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin13 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin14 - ID="OSC32_IN" - Type="PushPull" - Speed="Maximum" - Resistor="Floating" - Level="High" - Mode="Input" - Alternate="0" /> - <pin15 - ID="OSC32_OUT" - Type="PushPull" - Speed="Maximum" - Resistor="Floating" - Level="High" - Mode="Input" - Alternate="0" /> - </GPIOC> - <GPIOD> - <pin0 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin1 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin4 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin6 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin7 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin8 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin9 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin11 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin12 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin13 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin14 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin15 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - </GPIOD> - <GPIOF> - <pin0 - ID="OSC_IN" - Type="PushPull" - Speed="Minimum" - Resistor="Floating" - Level="High" - Mode="Input" - Alternate="0" /> - <pin1 - ID="OSC_OUT" - Type="PushPull" - Speed="Minimum" - Resistor="Floating" - Level="High" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin4 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin6 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin7 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin8 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin9 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin11 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin12 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin13 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin14 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin15 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - </GPIOF> - </ports> -</board> diff --git a/boards/ST_STM32F3_DISCOVERY/board.c b/boards/ST_STM32F3_DISCOVERY/board.c deleted file mode 100644 index baafd6550..000000000 --- a/boards/ST_STM32F3_DISCOVERY/board.c +++ /dev/null @@ -1,102 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-/**
- * @brief PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- * This variable is used by the HAL when initializing the PAL driver.
- */
-const PALConfig pal_default_config =
-{
- {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
- VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH},
- {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
- VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH},
- {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
- VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH},
- {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
- VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH},
- {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
- VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH},
- {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
- VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH}
-};
-#endif
-
-/**
- * @brief Early initialization code.
- * @details This initialization must be performed just after stack setup
- * and before any other initialization.
- */
-void __early_init(void) {
-
- stm32_clock_init();
-}
-
-#if HAL_USE_SDC || defined(__DOXYGEN__)
-/**
- * @brief SDC card detection.
- */
-bool_t sdc_lld_is_card_inserted(SDCDriver *sdcp) {
-
- (void)sdcp;
- /* TODO: Fill the implementation.*/
- return TRUE;
-}
-
-/**
- * @brief SDC card write protection detection.
- */
-bool_t sdc_lld_is_write_protected(SDCDriver *sdcp) {
-
- (void)sdcp;
- /* TODO: Fill the implementation.*/
- return FALSE;
-}
-#endif /* HAL_USE_SDC */
-
-#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
-/**
- * @brief MMC_SPI card detection.
- */
-bool_t mmc_lld_is_card_inserted(MMCDriver *mmcp) {
-
- (void)mmcp;
- /* TODO: Fill the implementation.*/
- return TRUE;
-}
-
-/**
- * @brief MMC_SPI card write protection detection.
- */
-bool_t mmc_lld_is_write_protected(MMCDriver *mmcp) {
-
- (void)mmcp;
- /* TODO: Fill the implementation.*/
- return FALSE;
-}
-#endif
-
-/**
- * @brief Board-specific initialization code.
- * @todo Add your board-specific code, if any.
- */
-void boardInit(void) {
-}
diff --git a/boards/ST_STM32F3_DISCOVERY/board.h b/boards/ST_STM32F3_DISCOVERY/board.h deleted file mode 100644 index 147dfb9b1..000000000 --- a/boards/ST_STM32F3_DISCOVERY/board.h +++ /dev/null @@ -1,891 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for STMicroelectronics STM32F3-Discovery board.
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_ST_STM32F3_DISCOVERY
-#define BOARD_NAME "STMicroelectronics STM32F3-Discovery"
-
-/*
- * Board oscillators-related settings.
- * NOTE: LSE not fitted.
- */
-#if !defined(STM32_LSECLK)
-#define STM32_LSECLK 0
-#endif
-
-#define STM32_LSEDRV (3 << 3)
-
-#if !defined(STM32_HSECLK)
-#define STM32_HSECLK 8000000
-#endif
-
-#define STM32_HSE_BYPASS
-
-/*
- * MCU type as defined in the ST header.
- */
-#define STM32F30X
-
-/*
- * IO pins assignments.
- */
-#define GPIOA_BUTTON 0
-#define GPIOA_PIN1 1
-#define GPIOA_PIN2 2
-#define GPIOA_PIN3 3
-#define GPIOA_PIN4 4
-#define GPIOA_SPI1_SCK 5
-#define GPIOA_SPI1_MISO 6
-#define GPIOA_SPI1_MOSI 7
-#define GPIOA_PIN8 8
-#define GPIOA_PIN9 9
-#define GPIOA_PIN10 10
-#define GPIOA_USB_DM 11
-#define GPIOA_USB_DP 12
-#define GPIOA_SWDIO 13
-#define GPIOA_SWCLK 14
-#define GPIOA_PIN15 15
-
-#define GPIOB_PIN0 0
-#define GPIOB_PIN1 1
-#define GPIOB_PIN2 2
-#define GPIOB_SWO 3
-#define GPIOB_PIN4 4
-#define GPIOB_PIN5 5
-#define GPIOB_I2C1_SCL 6
-#define GPIOB_I2C1_SDA 7
-#define GPIOB_PIN8 8
-#define GPIOB_PIN9 9
-#define GPIOB_PIN10 10
-#define GPIOB_PIN11 11
-#define GPIOB_PIN12 12
-#define GPIOB_PIN13 13
-#define GPIOB_PIN14 14
-#define GPIOB_PIN15 15
-
-#define GPIOC_PIN0 0
-#define GPIOC_PIN1 1
-#define GPIOC_PIN2 2
-#define GPIOC_PIN3 3
-#define GPIOC_PIN4 4
-#define GPIOC_PIN5 5
-#define GPIOC_PIN6 6
-#define GPIOC_PIN7 7
-#define GPIOC_PIN8 8
-#define GPIOC_PIN9 9
-#define GPIOC_PIN10 10
-#define GPIOC_PIN11 11
-#define GPIOC_PIN12 12
-#define GPIOC_PIN13 13
-#define GPIOC_OSC32_IN 14
-#define GPIOC_OSC32_OUT 15
-
-#define GPIOD_PIN0 0
-#define GPIOD_PIN1 1
-#define GPIOD_PIN2 2
-#define GPIOD_PIN3 3
-#define GPIOD_PIN4 4
-#define GPIOD_PIN5 5
-#define GPIOD_PIN6 6
-#define GPIOD_PIN7 7
-#define GPIOD_PIN8 8
-#define GPIOD_PIN9 9
-#define GPIOD_PIN10 10
-#define GPIOD_PIN11 11
-#define GPIOD_PIN12 12
-#define GPIOD_PIN13 13
-#define GPIOD_PIN14 14
-#define GPIOD_PIN15 15
-
-#define GPIOE_L3GD20_INT1 0
-#define GPIOE_L3GD20_INT2 1
-#define GPIOE_LSM303_DRDY 2
-#define GPIOE_SPI1_CS 3
-#define GPIOE_LSM303_INT1 4
-#define GPIOE_LSM303_INT2 5
-#define GPIOE_PIN6 6
-#define GPIOE_PIN7 7
-#define GPIOE_LED4_BLUE 8
-#define GPIOE_LED3_RED 9
-#define GPIOE_LED5_ORANGE 10
-#define GPIOE_LED7_GREEN 11
-#define GPIOE_LED9_BLUE 12
-#define GPIOE_LED10_RED 13
-#define GPIOE_LED8_ORANGE 14
-#define GPIOE_LED6_GREEN 15
-
-#define GPIOF_OSC_IN 0
-#define GPIOF_OSC_OUT 1
-#define GPIOF_PIN2 2
-#define GPIOF_PIN3 3
-#define GPIOF_PIN4 4
-#define GPIOF_PIN5 5
-#define GPIOF_PIN6 6
-#define GPIOF_PIN7 7
-#define GPIOF_PIN8 8
-#define GPIOF_PIN9 9
-#define GPIOF_PIN10 10
-#define GPIOF_PIN11 11
-#define GPIOF_PIN12 12
-#define GPIOF_PIN13 13
-#define GPIOF_PIN14 14
-#define GPIOF_PIN15 15
-
-/*
- * I/O ports initial setup, this configuration is established soon after reset
- * in the initialization code.
- * Please refer to the STM32 Reference Manual for details.
- */
-#define PIN_MODE_INPUT(n) (0U << ((n) * 2))
-#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2))
-#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2))
-#define PIN_MODE_ANALOG(n) (3U << ((n) * 2))
-#define PIN_ODR_LOW(n) (0U << (n))
-#define PIN_ODR_HIGH(n) (1U << (n))
-#define PIN_OTYPE_PUSHPULL(n) (0U << (n))
-#define PIN_OTYPE_OPENDRAIN(n) (1U << (n))
-#define PIN_OSPEED_2M(n) (0U << ((n) * 2))
-#define PIN_OSPEED_25M(n) (1U << ((n) * 2))
-#define PIN_OSPEED_50M(n) (2U << ((n) * 2))
-#define PIN_OSPEED_100M(n) (3U << ((n) * 2))
-#define PIN_PUPDR_FLOATING(n) (0U << ((n) * 2))
-#define PIN_PUPDR_PULLUP(n) (1U << ((n) * 2))
-#define PIN_PUPDR_PULLDOWN(n) (2U << ((n) * 2))
-#define PIN_AFIO_AF(n, v) ((v##U) << ((n % 8) * 4))
-
-/*
- * GPIOA setup:
- *
- * PA0 - BUTTON (input floating).
- * PA1 - PIN1 (input pullup).
- * PA2 - PIN2 (input pullup).
- * PA3 - PIN3 (input pullup).
- * PA4 - PIN4 (input pullup).
- * PA5 - SPI1_SCK (alternate 5).
- * PA6 - SPI1_MISO (alternate 5).
- * PA7 - SPI1_MOSI (alternate 5).
- * PA8 - PIN8 (input pullup).
- * PA9 - PIN9 (input pullup).
- * PA10 - PIN10 (input pullup).
- * PA11 - USB_DM (alternate 14).
- * PA12 - USB_DP (alternate 14).
- * PA13 - SWDIO (alternate 0).
- * PA14 - SWCLK (alternate 0).
- * PA15 - PIN15 (input pullup).
- */
-#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_BUTTON) | \
- PIN_MODE_INPUT(GPIOA_PIN1) | \
- PIN_MODE_INPUT(GPIOA_PIN2) | \
- PIN_MODE_INPUT(GPIOA_PIN3) | \
- PIN_MODE_INPUT(GPIOA_PIN4) | \
- PIN_MODE_ALTERNATE(GPIOA_SPI1_SCK) | \
- PIN_MODE_ALTERNATE(GPIOA_SPI1_MISO) | \
- PIN_MODE_ALTERNATE(GPIOA_SPI1_MOSI) | \
- PIN_MODE_INPUT(GPIOA_PIN8) | \
- PIN_MODE_INPUT(GPIOA_PIN9) | \
- PIN_MODE_INPUT(GPIOA_PIN10) | \
- PIN_MODE_ALTERNATE(GPIOA_USB_DM) | \
- PIN_MODE_ALTERNATE(GPIOA_USB_DP) | \
- PIN_MODE_ALTERNATE(GPIOA_SWDIO) | \
- PIN_MODE_ALTERNATE(GPIOA_SWCLK) | \
- PIN_MODE_INPUT(GPIOA_PIN15))
-#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN4) | \
- PIN_OTYPE_PUSHPULL(GPIOA_SPI1_SCK) | \
- PIN_OTYPE_PUSHPULL(GPIOA_SPI1_MISO) | \
- PIN_OTYPE_PUSHPULL(GPIOA_SPI1_MOSI) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN9) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN10) | \
- PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) | \
- PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) | \
- PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | \
- PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN15))
-#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_2M(GPIOA_BUTTON) | \
- PIN_OSPEED_2M(GPIOA_PIN1) | \
- PIN_OSPEED_2M(GPIOA_PIN2) | \
- PIN_OSPEED_2M(GPIOA_PIN3) | \
- PIN_OSPEED_2M(GPIOA_PIN4) | \
- PIN_OSPEED_100M(GPIOA_SPI1_SCK) | \
- PIN_OSPEED_100M(GPIOA_SPI1_MISO) | \
- PIN_OSPEED_100M(GPIOA_SPI1_MOSI) | \
- PIN_OSPEED_2M(GPIOA_PIN8) | \
- PIN_OSPEED_2M(GPIOA_PIN9) | \
- PIN_OSPEED_2M(GPIOA_PIN10) | \
- PIN_OSPEED_100M(GPIOA_USB_DM) | \
- PIN_OSPEED_2M(GPIOA_USB_DP) | \
- PIN_OSPEED_100M(GPIOA_SWDIO) | \
- PIN_OSPEED_100M(GPIOA_SWCLK) | \
- PIN_OSPEED_2M(GPIOA_PIN15))
-#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_BUTTON) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN1) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN2) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN3) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN4) | \
- PIN_PUPDR_FLOATING(GPIOA_SPI1_SCK) | \
- PIN_PUPDR_PULLUP(GPIOA_SPI1_MISO) | \
- PIN_PUPDR_FLOATING(GPIOA_SPI1_MOSI) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN8) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN9) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN10) | \
- PIN_PUPDR_FLOATING(GPIOA_USB_DM) | \
- PIN_PUPDR_FLOATING(GPIOA_USB_DP) | \
- PIN_PUPDR_PULLUP(GPIOA_SWDIO) | \
- PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN15))
-#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_BUTTON) | \
- PIN_ODR_HIGH(GPIOA_PIN1) | \
- PIN_ODR_HIGH(GPIOA_PIN2) | \
- PIN_ODR_HIGH(GPIOA_PIN3) | \
- PIN_ODR_HIGH(GPIOA_PIN4) | \
- PIN_ODR_HIGH(GPIOA_SPI1_SCK) | \
- PIN_ODR_HIGH(GPIOA_SPI1_MISO) | \
- PIN_ODR_HIGH(GPIOA_SPI1_MOSI) | \
- PIN_ODR_HIGH(GPIOA_PIN8) | \
- PIN_ODR_HIGH(GPIOA_PIN9) | \
- PIN_ODR_HIGH(GPIOA_PIN10) | \
- PIN_ODR_HIGH(GPIOA_USB_DM) | \
- PIN_ODR_HIGH(GPIOA_USB_DP) | \
- PIN_ODR_HIGH(GPIOA_SWDIO) | \
- PIN_ODR_HIGH(GPIOA_SWCLK) | \
- PIN_ODR_HIGH(GPIOA_PIN15))
-#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_BUTTON, 0) | \
- PIN_AFIO_AF(GPIOA_PIN1, 0) | \
- PIN_AFIO_AF(GPIOA_PIN2, 0) | \
- PIN_AFIO_AF(GPIOA_PIN3, 0) | \
- PIN_AFIO_AF(GPIOA_PIN4, 0) | \
- PIN_AFIO_AF(GPIOA_SPI1_SCK, 5) | \
- PIN_AFIO_AF(GPIOA_SPI1_MISO, 5) | \
- PIN_AFIO_AF(GPIOA_SPI1_MOSI, 5))
-#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0) | \
- PIN_AFIO_AF(GPIOA_PIN9, 0) | \
- PIN_AFIO_AF(GPIOA_PIN10, 0) | \
- PIN_AFIO_AF(GPIOA_USB_DM, 14) | \
- PIN_AFIO_AF(GPIOA_USB_DP, 14) | \
- PIN_AFIO_AF(GPIOA_SWDIO, 0) | \
- PIN_AFIO_AF(GPIOA_SWCLK, 0) | \
- PIN_AFIO_AF(GPIOA_PIN15, 0))
-
-/*
- * GPIOB setup:
- *
- * PB0 - PIN0 (input pullup).
- * PB1 - PIN1 (input pullup).
- * PB2 - PIN2 (input pullup).
- * PB3 - SWO (alternate 0).
- * PB4 - PIN4 (input pullup).
- * PB5 - PIN5 (input pullup).
- * PB6 - I2C1_SCL (alternate 4).
- * PB7 - I2C1_SDA (alternate 4).
- * PB8 - PIN8 (input pullup).
- * PB9 - PIN9 (input pullup).
- * PB10 - PIN10 (input pullup).
- * PB11 - PIN11 (input pullup).
- * PB12 - PIN12 (input pullup).
- * PB13 - PIN13 (input pullup).
- * PB14 - PIN14 (input pullup).
- * PB15 - PIN15 (input pullup).
- */
-#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | \
- PIN_MODE_INPUT(GPIOB_PIN1) | \
- PIN_MODE_INPUT(GPIOB_PIN2) | \
- PIN_MODE_ALTERNATE(GPIOB_SWO) | \
- PIN_MODE_INPUT(GPIOB_PIN4) | \
- PIN_MODE_INPUT(GPIOB_PIN5) | \
- PIN_MODE_ALTERNATE(GPIOB_I2C1_SCL) | \
- PIN_MODE_ALTERNATE(GPIOB_I2C1_SDA) | \
- PIN_MODE_INPUT(GPIOB_PIN8) | \
- PIN_MODE_INPUT(GPIOB_PIN9) | \
- PIN_MODE_INPUT(GPIOB_PIN10) | \
- PIN_MODE_INPUT(GPIOB_PIN11) | \
- PIN_MODE_INPUT(GPIOB_PIN12) | \
- PIN_MODE_INPUT(GPIOB_PIN13) | \
- PIN_MODE_INPUT(GPIOB_PIN14) | \
- PIN_MODE_INPUT(GPIOB_PIN15))
-#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | \
- PIN_OTYPE_PUSHPULL(GPIOB_SWO) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN4) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | \
- PIN_OTYPE_OPENDRAIN(GPIOB_I2C1_SCL) | \
- PIN_OTYPE_OPENDRAIN(GPIOB_I2C1_SDA) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN9) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN10) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN13) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN14) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN15))
-#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_2M(GPIOB_PIN0) | \
- PIN_OSPEED_2M(GPIOB_PIN1) | \
- PIN_OSPEED_2M(GPIOB_PIN2) | \
- PIN_OSPEED_100M(GPIOB_SWO) | \
- PIN_OSPEED_2M(GPIOB_PIN4) | \
- PIN_OSPEED_2M(GPIOB_PIN5) | \
- PIN_OSPEED_100M(GPIOB_I2C1_SCL) | \
- PIN_OSPEED_100M(GPIOB_I2C1_SDA) | \
- PIN_OSPEED_2M(GPIOB_PIN8) | \
- PIN_OSPEED_2M(GPIOB_PIN9) | \
- PIN_OSPEED_2M(GPIOB_PIN10) | \
- PIN_OSPEED_2M(GPIOB_PIN11) | \
- PIN_OSPEED_2M(GPIOB_PIN12) | \
- PIN_OSPEED_2M(GPIOB_PIN13) | \
- PIN_OSPEED_2M(GPIOB_PIN14) | \
- PIN_OSPEED_2M(GPIOB_PIN15))
-#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN1) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN2) | \
- PIN_PUPDR_FLOATING(GPIOB_SWO) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN4) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN5) | \
- PIN_PUPDR_FLOATING(GPIOB_I2C1_SCL) | \
- PIN_PUPDR_FLOATING(GPIOB_I2C1_SDA) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN8) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN9) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN10) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN11) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN12) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN13) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN14) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN15))
-#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | \
- PIN_ODR_HIGH(GPIOB_PIN1) | \
- PIN_ODR_HIGH(GPIOB_PIN2) | \
- PIN_ODR_HIGH(GPIOB_SWO) | \
- PIN_ODR_HIGH(GPIOB_PIN4) | \
- PIN_ODR_HIGH(GPIOB_PIN5) | \
- PIN_ODR_HIGH(GPIOB_I2C1_SCL) | \
- PIN_ODR_HIGH(GPIOB_I2C1_SDA) | \
- PIN_ODR_HIGH(GPIOB_PIN8) | \
- PIN_ODR_HIGH(GPIOB_PIN9) | \
- PIN_ODR_HIGH(GPIOB_PIN10) | \
- PIN_ODR_HIGH(GPIOB_PIN11) | \
- PIN_ODR_HIGH(GPIOB_PIN12) | \
- PIN_ODR_HIGH(GPIOB_PIN13) | \
- PIN_ODR_HIGH(GPIOB_PIN14) | \
- PIN_ODR_HIGH(GPIOB_PIN15))
-#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0) | \
- PIN_AFIO_AF(GPIOB_PIN1, 0) | \
- PIN_AFIO_AF(GPIOB_PIN2, 0) | \
- PIN_AFIO_AF(GPIOB_SWO, 0) | \
- PIN_AFIO_AF(GPIOB_PIN4, 0) | \
- PIN_AFIO_AF(GPIOB_PIN5, 0) | \
- PIN_AFIO_AF(GPIOB_I2C1_SCL, 4) | \
- PIN_AFIO_AF(GPIOB_I2C1_SDA, 4))
-#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0) | \
- PIN_AFIO_AF(GPIOB_PIN9, 0) | \
- PIN_AFIO_AF(GPIOB_PIN10, 0) | \
- PIN_AFIO_AF(GPIOB_PIN11, 0) | \
- PIN_AFIO_AF(GPIOB_PIN12, 0) | \
- PIN_AFIO_AF(GPIOB_PIN13, 0) | \
- PIN_AFIO_AF(GPIOB_PIN14, 0) | \
- PIN_AFIO_AF(GPIOB_PIN15, 0))
-
-/*
- * GPIOC setup:
- *
- * PC0 - PIN0 (input pullup).
- * PC1 - PIN1 (input pullup).
- * PC2 - PIN2 (input pullup).
- * PC3 - PIN3 (input pullup).
- * PC4 - PIN4 (input pullup).
- * PC5 - PIN5 (input pullup).
- * PC6 - PIN6 (input pullup).
- * PC7 - PIN7 (input pullup).
- * PC8 - PIN8 (input pullup).
- * PC9 - PIN9 (input pullup).
- * PC10 - PIN10 (input pullup).
- * PC11 - PIN11 (input pullup).
- * PC12 - PIN12 (input pullup).
- * PC13 - PIN13 (input pullup).
- * PC14 - OSC32_IN (input floating).
- * PC15 - OSC32_OUT (input floating).
- */
-#define VAL_GPIOC_MODER (PIN_MODE_INPUT(GPIOC_PIN0) | \
- PIN_MODE_INPUT(GPIOC_PIN1) | \
- PIN_MODE_INPUT(GPIOC_PIN2) | \
- PIN_MODE_INPUT(GPIOC_PIN3) | \
- PIN_MODE_INPUT(GPIOC_PIN4) | \
- PIN_MODE_INPUT(GPIOC_PIN5) | \
- PIN_MODE_INPUT(GPIOC_PIN6) | \
- PIN_MODE_INPUT(GPIOC_PIN7) | \
- PIN_MODE_INPUT(GPIOC_PIN8) | \
- PIN_MODE_INPUT(GPIOC_PIN9) | \
- PIN_MODE_INPUT(GPIOC_PIN10) | \
- PIN_MODE_INPUT(GPIOC_PIN11) | \
- PIN_MODE_INPUT(GPIOC_PIN12) | \
- PIN_MODE_INPUT(GPIOC_PIN13) | \
- PIN_MODE_INPUT(GPIOC_OSC32_IN) | \
- PIN_MODE_INPUT(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_PIN0) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN3) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN6) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN7) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN8) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN9) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN10) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | \
- PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) | \
- PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_2M(GPIOC_PIN0) | \
- PIN_OSPEED_2M(GPIOC_PIN1) | \
- PIN_OSPEED_2M(GPIOC_PIN2) | \
- PIN_OSPEED_2M(GPIOC_PIN3) | \
- PIN_OSPEED_2M(GPIOC_PIN4) | \
- PIN_OSPEED_2M(GPIOC_PIN5) | \
- PIN_OSPEED_2M(GPIOC_PIN6) | \
- PIN_OSPEED_2M(GPIOC_PIN7) | \
- PIN_OSPEED_2M(GPIOC_PIN8) | \
- PIN_OSPEED_2M(GPIOC_PIN9) | \
- PIN_OSPEED_2M(GPIOC_PIN10) | \
- PIN_OSPEED_2M(GPIOC_PIN11) | \
- PIN_OSPEED_2M(GPIOC_PIN12) | \
- PIN_OSPEED_2M(GPIOC_PIN13) | \
- PIN_OSPEED_100M(GPIOC_OSC32_IN) | \
- PIN_OSPEED_100M(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_PUPDR (PIN_PUPDR_PULLUP(GPIOC_PIN0) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN1) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN2) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN3) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN4) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN5) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN6) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN7) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN8) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN9) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN10) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN11) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN12) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN13) | \
- PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) | \
- PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_PIN0) | \
- PIN_ODR_HIGH(GPIOC_PIN1) | \
- PIN_ODR_HIGH(GPIOC_PIN2) | \
- PIN_ODR_HIGH(GPIOC_PIN3) | \
- PIN_ODR_HIGH(GPIOC_PIN4) | \
- PIN_ODR_HIGH(GPIOC_PIN5) | \
- PIN_ODR_HIGH(GPIOC_PIN6) | \
- PIN_ODR_HIGH(GPIOC_PIN7) | \
- PIN_ODR_HIGH(GPIOC_PIN8) | \
- PIN_ODR_HIGH(GPIOC_PIN9) | \
- PIN_ODR_HIGH(GPIOC_PIN10) | \
- PIN_ODR_HIGH(GPIOC_PIN11) | \
- PIN_ODR_HIGH(GPIOC_PIN12) | \
- PIN_ODR_HIGH(GPIOC_PIN13) | \
- PIN_ODR_HIGH(GPIOC_OSC32_IN) | \
- PIN_ODR_HIGH(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_PIN0, 0) | \
- PIN_AFIO_AF(GPIOC_PIN1, 0) | \
- PIN_AFIO_AF(GPIOC_PIN2, 0) | \
- PIN_AFIO_AF(GPIOC_PIN3, 0) | \
- PIN_AFIO_AF(GPIOC_PIN4, 0) | \
- PIN_AFIO_AF(GPIOC_PIN5, 0) | \
- PIN_AFIO_AF(GPIOC_PIN6, 0) | \
- PIN_AFIO_AF(GPIOC_PIN7, 0))
-#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_PIN8, 0) | \
- PIN_AFIO_AF(GPIOC_PIN9, 0) | \
- PIN_AFIO_AF(GPIOC_PIN10, 0) | \
- PIN_AFIO_AF(GPIOC_PIN11, 0) | \
- PIN_AFIO_AF(GPIOC_PIN12, 0) | \
- PIN_AFIO_AF(GPIOC_PIN13, 0) | \
- PIN_AFIO_AF(GPIOC_OSC32_IN, 0) | \
- PIN_AFIO_AF(GPIOC_OSC32_OUT, 0))
-
-/*
- * GPIOD setup:
- *
- * PD0 - PIN0 (input pullup).
- * PD1 - PIN1 (input pullup).
- * PD2 - PIN2 (input pullup).
- * PD3 - PIN3 (input pullup).
- * PD4 - PIN4 (input pullup).
- * PD5 - PIN5 (input pullup).
- * PD6 - PIN6 (input pullup).
- * PD7 - PIN7 (input pullup).
- * PD8 - PIN8 (input pullup).
- * PD9 - PIN9 (input pullup).
- * PD10 - PIN10 (input pullup).
- * PD11 - PIN11 (input pullup).
- * PD12 - PIN12 (input pullup).
- * PD13 - PIN13 (input pullup).
- * PD14 - PIN14 (input pullup).
- * PD15 - PIN15 (input pullup).
- */
-#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | \
- PIN_MODE_INPUT(GPIOD_PIN1) | \
- PIN_MODE_INPUT(GPIOD_PIN2) | \
- PIN_MODE_INPUT(GPIOD_PIN3) | \
- PIN_MODE_INPUT(GPIOD_PIN4) | \
- PIN_MODE_INPUT(GPIOD_PIN5) | \
- PIN_MODE_INPUT(GPIOD_PIN6) | \
- PIN_MODE_INPUT(GPIOD_PIN7) | \
- PIN_MODE_INPUT(GPIOD_PIN8) | \
- PIN_MODE_INPUT(GPIOD_PIN9) | \
- PIN_MODE_INPUT(GPIOD_PIN10) | \
- PIN_MODE_INPUT(GPIOD_PIN11) | \
- PIN_MODE_INPUT(GPIOD_PIN12) | \
- PIN_MODE_INPUT(GPIOD_PIN13) | \
- PIN_MODE_INPUT(GPIOD_PIN14) | \
- PIN_MODE_INPUT(GPIOD_PIN15))
-#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN4) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN5) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN15))
-#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_2M(GPIOD_PIN0) | \
- PIN_OSPEED_2M(GPIOD_PIN1) | \
- PIN_OSPEED_2M(GPIOD_PIN2) | \
- PIN_OSPEED_2M(GPIOD_PIN3) | \
- PIN_OSPEED_2M(GPIOD_PIN4) | \
- PIN_OSPEED_2M(GPIOD_PIN5) | \
- PIN_OSPEED_2M(GPIOD_PIN6) | \
- PIN_OSPEED_2M(GPIOD_PIN7) | \
- PIN_OSPEED_2M(GPIOD_PIN8) | \
- PIN_OSPEED_2M(GPIOD_PIN9) | \
- PIN_OSPEED_2M(GPIOD_PIN10) | \
- PIN_OSPEED_2M(GPIOD_PIN11) | \
- PIN_OSPEED_2M(GPIOD_PIN12) | \
- PIN_OSPEED_2M(GPIOD_PIN13) | \
- PIN_OSPEED_2M(GPIOD_PIN14) | \
- PIN_OSPEED_2M(GPIOD_PIN15))
-#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN1) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN2) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN3) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN4) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN5) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN6) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN7) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN8) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN9) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN10) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN11) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN12) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN13) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN14) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN15))
-#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | \
- PIN_ODR_HIGH(GPIOD_PIN1) | \
- PIN_ODR_HIGH(GPIOD_PIN2) | \
- PIN_ODR_HIGH(GPIOD_PIN3) | \
- PIN_ODR_HIGH(GPIOD_PIN4) | \
- PIN_ODR_HIGH(GPIOD_PIN5) | \
- PIN_ODR_HIGH(GPIOD_PIN6) | \
- PIN_ODR_HIGH(GPIOD_PIN7) | \
- PIN_ODR_HIGH(GPIOD_PIN8) | \
- PIN_ODR_HIGH(GPIOD_PIN9) | \
- PIN_ODR_HIGH(GPIOD_PIN10) | \
- PIN_ODR_HIGH(GPIOD_PIN11) | \
- PIN_ODR_HIGH(GPIOD_PIN12) | \
- PIN_ODR_HIGH(GPIOD_PIN13) | \
- PIN_ODR_HIGH(GPIOD_PIN14) | \
- PIN_ODR_HIGH(GPIOD_PIN15))
-#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0) | \
- PIN_AFIO_AF(GPIOD_PIN1, 0) | \
- PIN_AFIO_AF(GPIOD_PIN2, 0) | \
- PIN_AFIO_AF(GPIOD_PIN3, 0) | \
- PIN_AFIO_AF(GPIOD_PIN4, 0) | \
- PIN_AFIO_AF(GPIOD_PIN5, 0) | \
- PIN_AFIO_AF(GPIOD_PIN6, 0) | \
- PIN_AFIO_AF(GPIOD_PIN7, 0))
-#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0) | \
- PIN_AFIO_AF(GPIOD_PIN9, 0) | \
- PIN_AFIO_AF(GPIOD_PIN10, 0) | \
- PIN_AFIO_AF(GPIOD_PIN11, 0) | \
- PIN_AFIO_AF(GPIOD_PIN12, 0) | \
- PIN_AFIO_AF(GPIOD_PIN13, 0) | \
- PIN_AFIO_AF(GPIOD_PIN14, 0) | \
- PIN_AFIO_AF(GPIOD_PIN15, 0))
-
-/*
- * GPIOE setup:
- *
- * PE0 - L3GD20_INT1 (input pullup).
- * PE1 - L3GD20_INT2 (input pullup).
- * PE2 - LSM303_DRDY (input pullup).
- * PE3 - SPI1_CS (output pushpull maximum).
- * PE4 - LSM303_INT1 (input pullup).
- * PE5 - LSM303_INT2 (input pullup).
- * PE6 - PIN6 (input pullup).
- * PE7 - PIN7 (input pullup).
- * PE8 - LED4_BLUE (output pushpull maximum).
- * PE9 - LED3_RED (output pushpull maximum).
- * PE10 - LED5_ORANGE (output pushpull maximum).
- * PE11 - LED7_GREEN (output pushpull maximum).
- * PE12 - LED9_BLUE (output pushpull maximum).
- * PE13 - LED10_RED (output pushpull maximum).
- * PE14 - LED8_ORANGE (output pushpull maximum).
- * PE15 - LED6_GREEN (output pushpull maximum).
- */
-#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_L3GD20_INT1) | \
- PIN_MODE_INPUT(GPIOE_L3GD20_INT2) | \
- PIN_MODE_INPUT(GPIOE_LSM303_DRDY) | \
- PIN_MODE_OUTPUT(GPIOE_SPI1_CS) | \
- PIN_MODE_INPUT(GPIOE_LSM303_INT1) | \
- PIN_MODE_INPUT(GPIOE_LSM303_INT2) | \
- PIN_MODE_INPUT(GPIOE_PIN6) | \
- PIN_MODE_INPUT(GPIOE_PIN7) | \
- PIN_MODE_OUTPUT(GPIOE_LED4_BLUE) | \
- PIN_MODE_OUTPUT(GPIOE_LED3_RED) | \
- PIN_MODE_OUTPUT(GPIOE_LED5_ORANGE) | \
- PIN_MODE_OUTPUT(GPIOE_LED7_GREEN) | \
- PIN_MODE_OUTPUT(GPIOE_LED9_BLUE) | \
- PIN_MODE_OUTPUT(GPIOE_LED10_RED) | \
- PIN_MODE_OUTPUT(GPIOE_LED8_ORANGE) | \
- PIN_MODE_OUTPUT(GPIOE_LED6_GREEN))
-#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_L3GD20_INT1) |\
- PIN_OTYPE_PUSHPULL(GPIOE_L3GD20_INT2) |\
- PIN_OTYPE_PUSHPULL(GPIOE_LSM303_DRDY) |\
- PIN_OTYPE_PUSHPULL(GPIOE_SPI1_CS) | \
- PIN_OTYPE_PUSHPULL(GPIOE_LSM303_INT1) |\
- PIN_OTYPE_PUSHPULL(GPIOE_LSM303_INT2) |\
- PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | \
- PIN_OTYPE_PUSHPULL(GPIOE_LED4_BLUE) | \
- PIN_OTYPE_PUSHPULL(GPIOE_LED3_RED) | \
- PIN_OTYPE_PUSHPULL(GPIOE_LED5_ORANGE) |\
- PIN_OTYPE_PUSHPULL(GPIOE_LED7_GREEN) | \
- PIN_OTYPE_PUSHPULL(GPIOE_LED9_BLUE) | \
- PIN_OTYPE_PUSHPULL(GPIOE_LED10_RED) | \
- PIN_OTYPE_PUSHPULL(GPIOE_LED8_ORANGE) |\
- PIN_OTYPE_PUSHPULL(GPIOE_LED6_GREEN))
-#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_2M(GPIOE_L3GD20_INT1) | \
- PIN_OSPEED_2M(GPIOE_L3GD20_INT2) | \
- PIN_OSPEED_2M(GPIOE_LSM303_DRDY) | \
- PIN_OSPEED_100M(GPIOE_SPI1_CS) | \
- PIN_OSPEED_2M(GPIOE_LSM303_INT1) | \
- PIN_OSPEED_2M(GPIOE_LSM303_INT2) | \
- PIN_OSPEED_2M(GPIOE_PIN6) | \
- PIN_OSPEED_2M(GPIOE_PIN7) | \
- PIN_OSPEED_100M(GPIOE_LED4_BLUE) | \
- PIN_OSPEED_100M(GPIOE_LED3_RED) | \
- PIN_OSPEED_100M(GPIOE_LED5_ORANGE) | \
- PIN_OSPEED_100M(GPIOE_LED7_GREEN) | \
- PIN_OSPEED_100M(GPIOE_LED9_BLUE) | \
- PIN_OSPEED_100M(GPIOE_LED10_RED) | \
- PIN_OSPEED_100M(GPIOE_LED8_ORANGE) | \
- PIN_OSPEED_100M(GPIOE_LED6_GREEN))
-#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_L3GD20_INT1) | \
- PIN_PUPDR_PULLUP(GPIOE_L3GD20_INT2) | \
- PIN_PUPDR_PULLUP(GPIOE_LSM303_DRDY) | \
- PIN_PUPDR_FLOATING(GPIOE_SPI1_CS) | \
- PIN_PUPDR_PULLUP(GPIOE_LSM303_INT1) | \
- PIN_PUPDR_PULLUP(GPIOE_LSM303_INT2) | \
- PIN_PUPDR_PULLUP(GPIOE_PIN6) | \
- PIN_PUPDR_PULLUP(GPIOE_PIN7) | \
- PIN_PUPDR_PULLUP(GPIOE_LED4_BLUE) | \
- PIN_PUPDR_PULLUP(GPIOE_LED3_RED) | \
- PIN_PUPDR_PULLUP(GPIOE_LED5_ORANGE) | \
- PIN_PUPDR_FLOATING(GPIOE_LED7_GREEN) | \
- PIN_PUPDR_PULLUP(GPIOE_LED9_BLUE) | \
- PIN_PUPDR_FLOATING(GPIOE_LED10_RED) | \
- PIN_PUPDR_FLOATING(GPIOE_LED8_ORANGE) |\
- PIN_PUPDR_FLOATING(GPIOE_LED6_GREEN))
-#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_L3GD20_INT1) | \
- PIN_ODR_HIGH(GPIOE_L3GD20_INT2) | \
- PIN_ODR_HIGH(GPIOE_LSM303_DRDY) | \
- PIN_ODR_HIGH(GPIOE_SPI1_CS) | \
- PIN_ODR_HIGH(GPIOE_LSM303_INT1) | \
- PIN_ODR_HIGH(GPIOE_LSM303_INT2) | \
- PIN_ODR_HIGH(GPIOE_PIN6) | \
- PIN_ODR_HIGH(GPIOE_PIN7) | \
- PIN_ODR_LOW(GPIOE_LED4_BLUE) | \
- PIN_ODR_LOW(GPIOE_LED3_RED) | \
- PIN_ODR_LOW(GPIOE_LED5_ORANGE) | \
- PIN_ODR_LOW(GPIOE_LED7_GREEN) | \
- PIN_ODR_LOW(GPIOE_LED9_BLUE) | \
- PIN_ODR_LOW(GPIOE_LED10_RED) | \
- PIN_ODR_LOW(GPIOE_LED8_ORANGE) | \
- PIN_ODR_LOW(GPIOE_LED6_GREEN))
-#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_L3GD20_INT1, 0) | \
- PIN_AFIO_AF(GPIOE_L3GD20_INT2, 0) | \
- PIN_AFIO_AF(GPIOE_LSM303_DRDY, 0) | \
- PIN_AFIO_AF(GPIOE_SPI1_CS, 0) | \
- PIN_AFIO_AF(GPIOE_LSM303_INT1, 0) | \
- PIN_AFIO_AF(GPIOE_LSM303_INT2, 0) | \
- PIN_AFIO_AF(GPIOE_PIN6, 0) | \
- PIN_AFIO_AF(GPIOE_PIN7, 0))
-#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_LED4_BLUE, 0) | \
- PIN_AFIO_AF(GPIOE_LED3_RED, 0) | \
- PIN_AFIO_AF(GPIOE_LED5_ORANGE, 0) | \
- PIN_AFIO_AF(GPIOE_LED7_GREEN, 0) | \
- PIN_AFIO_AF(GPIOE_LED9_BLUE, 0) | \
- PIN_AFIO_AF(GPIOE_LED10_RED, 0) | \
- PIN_AFIO_AF(GPIOE_LED8_ORANGE, 0) | \
- PIN_AFIO_AF(GPIOE_LED6_GREEN, 0))
-
-/*
- * GPIOF setup:
- *
- * PF0 - OSC_IN (input floating).
- * PF1 - OSC_OUT (input floating).
- * PF2 - PIN2 (input pullup).
- * PF3 - PIN3 (input pullup).
- * PF4 - PIN4 (input pullup).
- * PF5 - PIN5 (input pullup).
- * PF6 - PIN6 (input pullup).
- * PF7 - PIN7 (input pullup).
- * PF8 - PIN8 (input pullup).
- * PF9 - PIN9 (input pullup).
- * PF10 - PIN10 (input pullup).
- * PF11 - PIN11 (input pullup).
- * PF12 - PIN12 (input pullup).
- * PF13 - PIN13 (input pullup).
- * PF14 - PIN14 (input pullup).
- * PF15 - PIN15 (input pullup).
- */
-#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_OSC_IN) | \
- PIN_MODE_INPUT(GPIOF_OSC_OUT) | \
- PIN_MODE_INPUT(GPIOF_PIN2) | \
- PIN_MODE_INPUT(GPIOF_PIN3) | \
- PIN_MODE_INPUT(GPIOF_PIN4) | \
- PIN_MODE_INPUT(GPIOF_PIN5) | \
- PIN_MODE_INPUT(GPIOF_PIN6) | \
- PIN_MODE_INPUT(GPIOF_PIN7) | \
- PIN_MODE_INPUT(GPIOF_PIN8) | \
- PIN_MODE_INPUT(GPIOF_PIN9) | \
- PIN_MODE_INPUT(GPIOF_PIN10) | \
- PIN_MODE_INPUT(GPIOF_PIN11) | \
- PIN_MODE_INPUT(GPIOF_PIN12) | \
- PIN_MODE_INPUT(GPIOF_PIN13) | \
- PIN_MODE_INPUT(GPIOF_PIN14) | \
- PIN_MODE_INPUT(GPIOF_PIN15))
-#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_OSC_IN) | \
- PIN_OTYPE_PUSHPULL(GPIOF_OSC_OUT) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN15))
-#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_100M(GPIOF_OSC_IN) | \
- PIN_OSPEED_100M(GPIOF_OSC_OUT) | \
- PIN_OSPEED_2M(GPIOF_PIN2) | \
- PIN_OSPEED_2M(GPIOF_PIN3) | \
- PIN_OSPEED_2M(GPIOF_PIN4) | \
- PIN_OSPEED_2M(GPIOF_PIN5) | \
- PIN_OSPEED_2M(GPIOF_PIN6) | \
- PIN_OSPEED_2M(GPIOF_PIN7) | \
- PIN_OSPEED_2M(GPIOF_PIN8) | \
- PIN_OSPEED_2M(GPIOF_PIN9) | \
- PIN_OSPEED_2M(GPIOF_PIN10) | \
- PIN_OSPEED_2M(GPIOF_PIN11) | \
- PIN_OSPEED_2M(GPIOF_PIN12) | \
- PIN_OSPEED_2M(GPIOF_PIN13) | \
- PIN_OSPEED_2M(GPIOF_PIN14) | \
- PIN_OSPEED_2M(GPIOF_PIN15))
-#define VAL_GPIOF_PUPDR (PIN_PUPDR_FLOATING(GPIOF_OSC_IN) | \
- PIN_PUPDR_FLOATING(GPIOF_OSC_OUT) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN2) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN3) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN4) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN5) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN6) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN7) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN8) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN9) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN10) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN11) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN12) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN13) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN14) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN15))
-#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_OSC_IN) | \
- PIN_ODR_HIGH(GPIOF_OSC_OUT) | \
- PIN_ODR_HIGH(GPIOF_PIN2) | \
- PIN_ODR_HIGH(GPIOF_PIN3) | \
- PIN_ODR_HIGH(GPIOF_PIN4) | \
- PIN_ODR_HIGH(GPIOF_PIN5) | \
- PIN_ODR_HIGH(GPIOF_PIN6) | \
- PIN_ODR_HIGH(GPIOF_PIN7) | \
- PIN_ODR_HIGH(GPIOF_PIN8) | \
- PIN_ODR_HIGH(GPIOF_PIN9) | \
- PIN_ODR_HIGH(GPIOF_PIN10) | \
- PIN_ODR_HIGH(GPIOF_PIN11) | \
- PIN_ODR_HIGH(GPIOF_PIN12) | \
- PIN_ODR_HIGH(GPIOF_PIN13) | \
- PIN_ODR_HIGH(GPIOF_PIN14) | \
- PIN_ODR_HIGH(GPIOF_PIN15))
-#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_OSC_IN, 0) | \
- PIN_AFIO_AF(GPIOF_OSC_OUT, 0) | \
- PIN_AFIO_AF(GPIOF_PIN2, 0) | \
- PIN_AFIO_AF(GPIOF_PIN3, 0) | \
- PIN_AFIO_AF(GPIOF_PIN4, 0) | \
- PIN_AFIO_AF(GPIOF_PIN5, 0) | \
- PIN_AFIO_AF(GPIOF_PIN6, 0) | \
- PIN_AFIO_AF(GPIOF_PIN7, 0))
-#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0) | \
- PIN_AFIO_AF(GPIOF_PIN9, 0) | \
- PIN_AFIO_AF(GPIOF_PIN10, 0) | \
- PIN_AFIO_AF(GPIOF_PIN11, 0) | \
- PIN_AFIO_AF(GPIOF_PIN12, 0) | \
- PIN_AFIO_AF(GPIOF_PIN13, 0) | \
- PIN_AFIO_AF(GPIOF_PIN14, 0) | \
- PIN_AFIO_AF(GPIOF_PIN15, 0))
-
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
diff --git a/boards/ST_STM32F3_DISCOVERY/board.mk b/boards/ST_STM32F3_DISCOVERY/board.mk deleted file mode 100644 index 522082fe9..000000000 --- a/boards/ST_STM32F3_DISCOVERY/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files.
-BOARDSRC = ${CHIBIOS}/boards/ST_STM32F3_DISCOVERY/board.c
-
-# Required include directories
-BOARDINC = ${CHIBIOS}/boards/ST_STM32F3_DISCOVERY
diff --git a/boards/ST_STM32F3_DISCOVERY/cfg/board.chcfg b/boards/ST_STM32F3_DISCOVERY/cfg/board.chcfg deleted file mode 100644 index cbd264d03..000000000 --- a/boards/ST_STM32F3_DISCOVERY/cfg/board.chcfg +++ /dev/null @@ -1,798 +0,0 @@ -<?xml version="1.0" encoding="UTF-8"?>
-<!-- STM32F3xx board Template -->
-<board
- xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
- xsi:noNamespaceSchemaLocation="http://www.chibios.org/xml/schema/boards/stm32f3xx_board.xsd">
- <configuration_settings>
- <templates_path>resources/gencfg/processors/boards/stm32f3xx/templates</templates_path>
- <output_path>..</output_path>
- </configuration_settings>
- <board_name>STMicroelectronics STM32F3-Discovery</board_name>
- <board_id>ST_STM32F3_DISCOVERY</board_id>
- <board_functions></board_functions>
- <subtype>STM32F30X</subtype>
- <clocks HSEFrequency="8000000" HSEBypass="true" LSEFrequency="0"
- LSEBypass="false" LSEDrive="3 High Drive (default)" />
- <ports>
- <GPIOA>
- <pin0
- ID="BUTTON"
- Type="PushPull"
- Speed="Minimum"
- Resistor="Floating"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin1
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin2
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin3
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin4
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin5
- ID="SPI1_SCK"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Alternate"
- Alternate="5" ></pin5>
- <pin6
- ID="SPI1_MISO"
- Type="PushPull"
- Speed="Maximum"
- Resistor="PullUp"
- Level="High"
- Mode="Alternate"
- Alternate="5" />
- <pin7
- ID="SPI1_MOSI"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Alternate"
- Alternate="5" />
- <pin8
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin9
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin10
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin11
- ID="USB_DM"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Alternate"
- Alternate="14" />
- <pin12
- ID="USB_DP"
- Type="PushPull"
- Speed="Minimum"
- Resistor="Floating"
- Level="High"
- Mode="Alternate"
- Alternate="14" ></pin12>
- <pin13
- ID="SWDIO"
- Type="PushPull"
- Speed="Maximum"
- Resistor="PullUp"
- Level="High"
- Mode="Alternate"
- Alternate="0" />
- <pin14
- ID="SWCLK"
- Type="PushPull"
- Speed="Maximum"
- Resistor="PullDown"
- Level="High"
- Mode="Alternate"
- Alternate="0" />
- <pin15
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- </GPIOA>
- <GPIOB>
- <pin0
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin1
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin2
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin3
- ID="SWO"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Alternate"
- Alternate="0" />
- <pin4
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin5
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" ></pin5>
- <pin6
- ID="I2C1_SCL"
- Type="OpenDrain"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Alternate"
- Alternate="4" />
- <pin7
- ID="I2C1_SDA"
- Type="OpenDrain"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Alternate"
- Alternate="4" />
- <pin8
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin9
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin10
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin11
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin12
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin13
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin14
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin15
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- </GPIOB>
- <GPIOC>
- <pin0
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin1
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin2
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin3
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin4
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin5
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin6
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin7
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin8
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin9
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin10
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin11
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin12
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin13
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin14
- ID="OSC32_IN"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin15
- ID="OSC32_OUT"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Input"
- Alternate="0" />
- </GPIOC>
- <GPIOD>
- <pin0
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin1
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin2
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin3
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin4
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin5
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin6
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin7
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin8
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin9
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin10
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin11
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin12
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin13
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin14
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin15
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- </GPIOD>
- <GPIOE>
- <pin0
- ID="L3GD20_INT1"
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin1
- ID="L3GD20_INT2"
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin2
- ID="LSM303_DRDY"
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin3
- ID="SPI1_CS"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Output"
- Alternate="0" ></pin3>
- <pin4
- ID="LSM303_INT1"
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin5
- ID="LSM303_INT2"
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin6
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin7
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin8
- ID="LED4_BLUE"
- Type="PushPull"
- Speed="Maximum"
- Resistor="PullUp"
- Level="Low"
- Mode="Output"
- Alternate="0" />
- <pin9
- ID="LED3_RED"
- Type="PushPull"
- Speed="Maximum"
- Resistor="PullUp"
- Level="Low"
- Mode="Output"
- Alternate="0" />
- <pin10
- ID="LED5_ORANGE"
- Type="PushPull"
- Speed="Maximum"
- Resistor="PullUp"
- Level="Low"
- Mode="Output"
- Alternate="0" />
- <pin11
- ID="LED7_GREEN"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="Low"
- Mode="Output"
- Alternate="0" />
- <pin12
- ID="LED9_BLUE"
- Type="PushPull"
- Speed="Maximum"
- Resistor="PullUp"
- Level="Low"
- Mode="Output"
- Alternate="0" />
- <pin13
- ID="LED10_RED"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="Low"
- Mode="Output"
- Alternate="0" ></pin13>
- <pin14
- ID="LED8_ORANGE"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="Low"
- Mode="Output"
- Alternate="0" />
- <pin15
- ID="LED6_GREEN"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="Low"
- Mode="Output"
- Alternate="0" />
- </GPIOE>
- <GPIOF>
- <pin0
- ID="OSC_IN"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin1
- ID="OSC_OUT"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Input"
- Alternate="0" ></pin1>
- <pin2
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin3
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" ></pin3>
- <pin4
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin5
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin6
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin7
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin8
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin9
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin10
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin11
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin12
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin13
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin14
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin15
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- </GPIOF>
- </ports>
-</board>
diff --git a/boards/ST_STM32F4_DISCOVERY/board.c b/boards/ST_STM32F4_DISCOVERY/board.c deleted file mode 100644 index 99569f695..000000000 --- a/boards/ST_STM32F4_DISCOVERY/board.c +++ /dev/null @@ -1,108 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-/**
- * @brief PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- * This variable is used by the HAL when initializing the PAL driver.
- */
-const PALConfig pal_default_config =
-{
- {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
- VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH},
- {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
- VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH},
- {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
- VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH},
- {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
- VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH},
- {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
- VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH},
- {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
- VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH},
- {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
- VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH},
- {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
- VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH},
- {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
- VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH}
-};
-#endif
-
-/**
- * @brief Early initialization code.
- * @details This initialization must be performed just after stack setup
- * and before any other initialization.
- */
-void __early_init(void) {
-
- stm32_clock_init();
-}
-
-#if HAL_USE_SDC || defined(__DOXYGEN__)
-/**
- * @brief SDC card detection.
- */
-bool_t sdc_lld_is_card_inserted(SDCDriver *sdcp) {
-
- (void)sdcp;
- /* TODO: Fill the implementation.*/
- return TRUE;
-}
-
-/**
- * @brief SDC card write protection detection.
- */
-bool_t sdc_lld_is_write_protected(SDCDriver *sdcp) {
-
- (void)sdcp;
- /* TODO: Fill the implementation.*/
- return FALSE;
-}
-#endif /* HAL_USE_SDC */
-
-#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
-/**
- * @brief MMC_SPI card detection.
- */
-bool_t mmc_lld_is_card_inserted(MMCDriver *mmcp) {
-
- (void)mmcp;
- /* TODO: Fill the implementation.*/
- return TRUE;
-}
-
-/**
- * @brief MMC_SPI card write protection detection.
- */
-bool_t mmc_lld_is_write_protected(MMCDriver *mmcp) {
-
- (void)mmcp;
- /* TODO: Fill the implementation.*/
- return FALSE;
-}
-#endif
-
-/**
- * @brief Board-specific initialization code.
- * @todo Add your board-specific code, if any.
- */
-void boardInit(void) {
-}
diff --git a/boards/ST_STM32F4_DISCOVERY/board.h b/boards/ST_STM32F4_DISCOVERY/board.h deleted file mode 100644 index 6e636db9e..000000000 --- a/boards/ST_STM32F4_DISCOVERY/board.h +++ /dev/null @@ -1,1297 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for STMicroelectronics STM32F4-Discovery board.
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_ST_STM32F4_DISCOVERY
-#define BOARD_NAME "STMicroelectronics STM32F4-Discovery"
-
-
-/*
- * Board oscillators-related settings.
- * NOTE: LSE not fitted.
- */
-#if !defined(STM32_LSECLK)
-#define STM32_LSECLK 0
-#endif
-
-#if !defined(STM32_HSECLK)
-#define STM32_HSECLK 8000000
-#endif
-
-
-/*
- * Board voltages.
- * Required for performance limits calculation.
- */
-#define STM32_VDD 300
-
-/*
- * MCU type as defined in the ST header file stm32f4xx.h.
- */
-#define STM32F4XX
-
-/*
- * IO pins assignments.
- */
-#define GPIOA_BUTTON 0
-#define GPIOA_PIN1 1
-#define GPIOA_PIN2 2
-#define GPIOA_PIN3 3
-#define GPIOA_LRCK 4
-#define GPIOA_SPC 5
-#define GPIOA_SDO 6
-#define GPIOA_SDI 7
-#define GPIOA_PIN8 8
-#define GPIOA_VBUS_FS 9
-#define GPIOA_OTG_FS_ID 10
-#define GPIOA_OTG_FS_DM 11
-#define GPIOA_OTG_FS_DP 12
-#define GPIOA_SWDIO 13
-#define GPIOA_SWCLK 14
-#define GPIOA_PIN15 15
-
-#define GPIOB_PIN0 0
-#define GPIOB_PIN1 1
-#define GPIOB_PIN2 2
-#define GPIOB_SWO 3
-#define GPIOB_PIN4 4
-#define GPIOB_PIN5 5
-#define GPIOB_SCL 6
-#define GPIOB_PIN7 7
-#define GPIOB_PIN8 8
-#define GPIOB_SDA 9
-#define GPIOB_CLK_IN 10
-#define GPIOB_PIN11 11
-#define GPIOB_PIN12 12
-#define GPIOB_PIN13 13
-#define GPIOB_PIN14 14
-#define GPIOB_PIN15 15
-
-#define GPIOC_OTG_FS_POWER_ON 0
-#define GPIOC_PIN1 1
-#define GPIOC_PIN2 2
-#define GPIOC_PDM_OUT 3
-#define GPIOC_PIN4 4
-#define GPIOC_PIN5 5
-#define GPIOC_PIN6 6
-#define GPIOC_MCLK 7
-#define GPIOC_PIN8 8
-#define GPIOC_PIN9 9
-#define GPIOC_SCLK 10
-#define GPIOC_PIN11 11
-#define GPIOC_SDIN 12
-#define GPIOC_PIN13 13
-#define GPIOC_PIN14 14
-#define GPIOC_PIN15 15
-
-#define GPIOD_PIN0 0
-#define GPIOD_PIN1 1
-#define GPIOD_PIN2 2
-#define GPIOD_PIN3 3
-#define GPIOD_RESET 4
-#define GPIOD_OVER_CURRENT 5
-#define GPIOD_PIN6 6
-#define GPIOD_PIN7 7
-#define GPIOD_PIN8 8
-#define GPIOD_PIN9 9
-#define GPIOD_PIN10 10
-#define GPIOD_PIN11 11
-#define GPIOD_LED4 12
-#define GPIOD_LED3 13
-#define GPIOD_LED5 14
-#define GPIOD_LED6 15
-
-#define GPIOE_INT1 0
-#define GPIOE_INT2 1
-#define GPIOE_PIN2 2
-#define GPIOE_CS_SPI 3
-#define GPIOE_PIN4 4
-#define GPIOE_PIN5 5
-#define GPIOE_PIN6 6
-#define GPIOE_PIN7 7
-#define GPIOE_PIN8 8
-#define GPIOE_PIN9 9
-#define GPIOE_PIN10 10
-#define GPIOE_PIN11 11
-#define GPIOE_PIN12 12
-#define GPIOE_PIN13 13
-#define GPIOE_PIN14 14
-#define GPIOE_PIN15 15
-
-#define GPIOF_PIN0 0
-#define GPIOF_PIN1 1
-#define GPIOF_PIN2 2
-#define GPIOF_PIN3 3
-#define GPIOF_PIN4 4
-#define GPIOF_PIN5 5
-#define GPIOF_PIN6 6
-#define GPIOF_PIN7 7
-#define GPIOF_PIN8 8
-#define GPIOF_PIN9 9
-#define GPIOF_PIN10 10
-#define GPIOF_PIN11 11
-#define GPIOF_PIN12 12
-#define GPIOF_PIN13 13
-#define GPIOF_PIN14 14
-#define GPIOF_PIN15 15
-
-#define GPIOG_PIN0 0
-#define GPIOG_PIN1 1
-#define GPIOG_PIN2 2
-#define GPIOG_PIN3 3
-#define GPIOG_PIN4 4
-#define GPIOG_PIN5 5
-#define GPIOG_PIN6 6
-#define GPIOG_PIN7 7
-#define GPIOG_PIN8 8
-#define GPIOG_PIN9 9
-#define GPIOG_PIN10 10
-#define GPIOG_PIN11 11
-#define GPIOG_PIN12 12
-#define GPIOG_PIN13 13
-#define GPIOG_PIN14 14
-#define GPIOG_PIN15 15
-
-#define GPIOH_OSC_IN 0
-#define GPIOH_OSC_OUT 1
-#define GPIOH_PIN2 2
-#define GPIOH_PIN3 3
-#define GPIOH_PIN4 4
-#define GPIOH_PIN5 5
-#define GPIOH_PIN6 6
-#define GPIOH_PIN7 7
-#define GPIOH_PIN8 8
-#define GPIOH_PIN9 9
-#define GPIOH_PIN10 10
-#define GPIOH_PIN11 11
-#define GPIOH_PIN12 12
-#define GPIOH_PIN13 13
-#define GPIOH_PIN14 14
-#define GPIOH_PIN15 15
-
-#define GPIOI_PIN0 0
-#define GPIOI_PIN1 1
-#define GPIOI_PIN2 2
-#define GPIOI_PIN3 3
-#define GPIOI_PIN4 4
-#define GPIOI_PIN5 5
-#define GPIOI_PIN6 6
-#define GPIOI_PIN7 7
-#define GPIOI_PIN8 8
-#define GPIOI_PIN9 9
-#define GPIOI_PIN10 10
-#define GPIOI_PIN11 11
-#define GPIOI_PIN12 12
-#define GPIOI_PIN13 13
-#define GPIOI_PIN14 14
-#define GPIOI_PIN15 15
-
-/*
- * I/O ports initial setup, this configuration is established soon after reset
- * in the initialization code.
- * Please refer to the STM32 Reference Manual for details.
- */
-#define PIN_MODE_INPUT(n) (0U << ((n) * 2))
-#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2))
-#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2))
-#define PIN_MODE_ANALOG(n) (3U << ((n) * 2))
-#define PIN_ODR_LOW(n) (0U << (n))
-#define PIN_ODR_HIGH(n) (1U << (n))
-#define PIN_OTYPE_PUSHPULL(n) (0U << (n))
-#define PIN_OTYPE_OPENDRAIN(n) (1U << (n))
-#define PIN_OSPEED_2M(n) (0U << ((n) * 2))
-#define PIN_OSPEED_25M(n) (1U << ((n) * 2))
-#define PIN_OSPEED_50M(n) (2U << ((n) * 2))
-#define PIN_OSPEED_100M(n) (3U << ((n) * 2))
-#define PIN_PUPDR_FLOATING(n) (0U << ((n) * 2))
-#define PIN_PUPDR_PULLUP(n) (1U << ((n) * 2))
-#define PIN_PUPDR_PULLDOWN(n) (2U << ((n) * 2))
-#define PIN_AFIO_AF(n, v) ((v##U) << ((n % 8) * 4))
-
-/*
- * GPIOA setup:
- *
- * PA0 - BUTTON (input floating).
- * PA1 - PIN1 (input pullup).
- * PA2 - PIN2 (input pullup).
- * PA3 - PIN3 (input pullup).
- * PA4 - LRCK (alternate 6).
- * PA5 - SPC (alternate 5).
- * PA6 - SDO (alternate 5).
- * PA7 - SDI (alternate 5).
- * PA8 - PIN8 (input pullup).
- * PA9 - VBUS_FS (input floating).
- * PA10 - OTG_FS_ID (alternate 10).
- * PA11 - OTG_FS_DM (alternate 10).
- * PA12 - OTG_FS_DP (alternate 10).
- * PA13 - SWDIO (alternate 0).
- * PA14 - SWCLK (alternate 0).
- * PA15 - PIN15 (input pullup).
- */
-#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_BUTTON) | \
- PIN_MODE_INPUT(GPIOA_PIN1) | \
- PIN_MODE_INPUT(GPIOA_PIN2) | \
- PIN_MODE_INPUT(GPIOA_PIN3) | \
- PIN_MODE_ALTERNATE(GPIOA_LRCK) | \
- PIN_MODE_ALTERNATE(GPIOA_SPC) | \
- PIN_MODE_ALTERNATE(GPIOA_SDO) | \
- PIN_MODE_ALTERNATE(GPIOA_SDI) | \
- PIN_MODE_INPUT(GPIOA_PIN8) | \
- PIN_MODE_INPUT(GPIOA_VBUS_FS) | \
- PIN_MODE_ALTERNATE(GPIOA_OTG_FS_ID) | \
- PIN_MODE_ALTERNATE(GPIOA_OTG_FS_DM) | \
- PIN_MODE_ALTERNATE(GPIOA_OTG_FS_DP) | \
- PIN_MODE_ALTERNATE(GPIOA_SWDIO) | \
- PIN_MODE_ALTERNATE(GPIOA_SWCLK) | \
- PIN_MODE_INPUT(GPIOA_PIN15))
-#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | \
- PIN_OTYPE_PUSHPULL(GPIOA_LRCK) | \
- PIN_OTYPE_PUSHPULL(GPIOA_SPC) | \
- PIN_OTYPE_PUSHPULL(GPIOA_SDO) | \
- PIN_OTYPE_PUSHPULL(GPIOA_SDI) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | \
- PIN_OTYPE_PUSHPULL(GPIOA_VBUS_FS) | \
- PIN_OTYPE_PUSHPULL(GPIOA_OTG_FS_ID) | \
- PIN_OTYPE_PUSHPULL(GPIOA_OTG_FS_DM) | \
- PIN_OTYPE_PUSHPULL(GPIOA_OTG_FS_DP) | \
- PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | \
- PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN15))
-#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_100M(GPIOA_BUTTON) | \
- PIN_OSPEED_100M(GPIOA_PIN1) | \
- PIN_OSPEED_100M(GPIOA_PIN2) | \
- PIN_OSPEED_100M(GPIOA_PIN3) | \
- PIN_OSPEED_100M(GPIOA_LRCK) | \
- PIN_OSPEED_50M(GPIOA_SPC) | \
- PIN_OSPEED_50M(GPIOA_SDO) | \
- PIN_OSPEED_50M(GPIOA_SDI) | \
- PIN_OSPEED_100M(GPIOA_PIN8) | \
- PIN_OSPEED_100M(GPIOA_VBUS_FS) | \
- PIN_OSPEED_100M(GPIOA_OTG_FS_ID) | \
- PIN_OSPEED_100M(GPIOA_OTG_FS_DM) | \
- PIN_OSPEED_100M(GPIOA_OTG_FS_DP) | \
- PIN_OSPEED_100M(GPIOA_SWDIO) | \
- PIN_OSPEED_100M(GPIOA_SWCLK) | \
- PIN_OSPEED_100M(GPIOA_PIN15))
-#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_BUTTON) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN1) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN2) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN3) | \
- PIN_PUPDR_FLOATING(GPIOA_LRCK) | \
- PIN_PUPDR_FLOATING(GPIOA_SPC) | \
- PIN_PUPDR_FLOATING(GPIOA_SDO) | \
- PIN_PUPDR_FLOATING(GPIOA_SDI) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN8) | \
- PIN_PUPDR_FLOATING(GPIOA_VBUS_FS) | \
- PIN_PUPDR_FLOATING(GPIOA_OTG_FS_ID) | \
- PIN_PUPDR_FLOATING(GPIOA_OTG_FS_DM) | \
- PIN_PUPDR_FLOATING(GPIOA_OTG_FS_DP) | \
- PIN_PUPDR_FLOATING(GPIOA_SWDIO) | \
- PIN_PUPDR_FLOATING(GPIOA_SWCLK) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN15))
-#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_BUTTON) | \
- PIN_ODR_HIGH(GPIOA_PIN1) | \
- PIN_ODR_HIGH(GPIOA_PIN2) | \
- PIN_ODR_HIGH(GPIOA_PIN3) | \
- PIN_ODR_HIGH(GPIOA_LRCK) | \
- PIN_ODR_HIGH(GPIOA_SPC) | \
- PIN_ODR_HIGH(GPIOA_SDO) | \
- PIN_ODR_HIGH(GPIOA_SDI) | \
- PIN_ODR_HIGH(GPIOA_PIN8) | \
- PIN_ODR_HIGH(GPIOA_VBUS_FS) | \
- PIN_ODR_HIGH(GPIOA_OTG_FS_ID) | \
- PIN_ODR_HIGH(GPIOA_OTG_FS_DM) | \
- PIN_ODR_HIGH(GPIOA_OTG_FS_DP) | \
- PIN_ODR_HIGH(GPIOA_SWDIO) | \
- PIN_ODR_HIGH(GPIOA_SWCLK) | \
- PIN_ODR_HIGH(GPIOA_PIN15))
-#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_BUTTON, 0) | \
- PIN_AFIO_AF(GPIOA_PIN1, 0) | \
- PIN_AFIO_AF(GPIOA_PIN2, 0) | \
- PIN_AFIO_AF(GPIOA_PIN3, 0) | \
- PIN_AFIO_AF(GPIOA_LRCK, 6) | \
- PIN_AFIO_AF(GPIOA_SPC, 5) | \
- PIN_AFIO_AF(GPIOA_SDO, 5) | \
- PIN_AFIO_AF(GPIOA_SDI, 5))
-#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0) | \
- PIN_AFIO_AF(GPIOA_VBUS_FS, 0) | \
- PIN_AFIO_AF(GPIOA_OTG_FS_ID, 10) | \
- PIN_AFIO_AF(GPIOA_OTG_FS_DM, 10) | \
- PIN_AFIO_AF(GPIOA_OTG_FS_DP, 10) | \
- PIN_AFIO_AF(GPIOA_SWDIO, 0) | \
- PIN_AFIO_AF(GPIOA_SWCLK, 0) | \
- PIN_AFIO_AF(GPIOA_PIN15, 0))
-
-/*
- * GPIOB setup:
- *
- * PB0 - PIN0 (input pullup).
- * PB1 - PIN1 (input pullup).
- * PB2 - PIN2 (input pullup).
- * PB3 - SWO (alternate 0).
- * PB4 - PIN4 (input pullup).
- * PB5 - PIN5 (input pullup).
- * PB6 - SCL (alternate 4).
- * PB7 - PIN7 (input pullup).
- * PB8 - PIN8 (input pullup).
- * PB9 - SDA (alternate 4).
- * PB10 - CLK_IN (input pullup).
- * PB11 - PIN11 (input pullup).
- * PB12 - PIN12 (input pullup).
- * PB13 - PIN13 (input pullup).
- * PB14 - PIN14 (input pullup).
- * PB15 - PIN15 (input pullup).
- */
-#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | \
- PIN_MODE_INPUT(GPIOB_PIN1) | \
- PIN_MODE_INPUT(GPIOB_PIN2) | \
- PIN_MODE_ALTERNATE(GPIOB_SWO) | \
- PIN_MODE_INPUT(GPIOB_PIN4) | \
- PIN_MODE_INPUT(GPIOB_PIN5) | \
- PIN_MODE_ALTERNATE(GPIOB_SCL) | \
- PIN_MODE_INPUT(GPIOB_PIN7) | \
- PIN_MODE_INPUT(GPIOB_PIN8) | \
- PIN_MODE_ALTERNATE(GPIOB_SDA) | \
- PIN_MODE_INPUT(GPIOB_CLK_IN) | \
- PIN_MODE_INPUT(GPIOB_PIN11) | \
- PIN_MODE_INPUT(GPIOB_PIN12) | \
- PIN_MODE_INPUT(GPIOB_PIN13) | \
- PIN_MODE_INPUT(GPIOB_PIN14) | \
- PIN_MODE_INPUT(GPIOB_PIN15))
-#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | \
- PIN_OTYPE_PUSHPULL(GPIOB_SWO) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN4) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | \
- PIN_OTYPE_OPENDRAIN(GPIOB_SCL) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | \
- PIN_OTYPE_OPENDRAIN(GPIOB_SDA) | \
- PIN_OTYPE_PUSHPULL(GPIOB_CLK_IN) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN13) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN14) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN15))
-#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_100M(GPIOB_PIN0) | \
- PIN_OSPEED_100M(GPIOB_PIN1) | \
- PIN_OSPEED_100M(GPIOB_PIN2) | \
- PIN_OSPEED_100M(GPIOB_SWO) | \
- PIN_OSPEED_100M(GPIOB_PIN4) | \
- PIN_OSPEED_100M(GPIOB_PIN5) | \
- PIN_OSPEED_100M(GPIOB_SCL) | \
- PIN_OSPEED_100M(GPIOB_PIN7) | \
- PIN_OSPEED_100M(GPIOB_PIN8) | \
- PIN_OSPEED_100M(GPIOB_SDA) | \
- PIN_OSPEED_100M(GPIOB_CLK_IN) | \
- PIN_OSPEED_100M(GPIOB_PIN11) | \
- PIN_OSPEED_100M(GPIOB_PIN12) | \
- PIN_OSPEED_100M(GPIOB_PIN13) | \
- PIN_OSPEED_100M(GPIOB_PIN14) | \
- PIN_OSPEED_100M(GPIOB_PIN15))
-#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN1) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN2) | \
- PIN_PUPDR_FLOATING(GPIOB_SWO) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN4) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN5) | \
- PIN_PUPDR_FLOATING(GPIOB_SCL) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN7) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN8) | \
- PIN_PUPDR_FLOATING(GPIOB_SDA) | \
- PIN_PUPDR_PULLUP(GPIOB_CLK_IN) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN11) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN12) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN13) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN14) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN15))
-#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | \
- PIN_ODR_HIGH(GPIOB_PIN1) | \
- PIN_ODR_HIGH(GPIOB_PIN2) | \
- PIN_ODR_HIGH(GPIOB_SWO) | \
- PIN_ODR_HIGH(GPIOB_PIN4) | \
- PIN_ODR_HIGH(GPIOB_PIN5) | \
- PIN_ODR_HIGH(GPIOB_SCL) | \
- PIN_ODR_HIGH(GPIOB_PIN7) | \
- PIN_ODR_HIGH(GPIOB_PIN8) | \
- PIN_ODR_HIGH(GPIOB_SDA) | \
- PIN_ODR_HIGH(GPIOB_CLK_IN) | \
- PIN_ODR_HIGH(GPIOB_PIN11) | \
- PIN_ODR_HIGH(GPIOB_PIN12) | \
- PIN_ODR_HIGH(GPIOB_PIN13) | \
- PIN_ODR_HIGH(GPIOB_PIN14) | \
- PIN_ODR_HIGH(GPIOB_PIN15))
-#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0) | \
- PIN_AFIO_AF(GPIOB_PIN1, 0) | \
- PIN_AFIO_AF(GPIOB_PIN2, 0) | \
- PIN_AFIO_AF(GPIOB_SWO, 0) | \
- PIN_AFIO_AF(GPIOB_PIN4, 0) | \
- PIN_AFIO_AF(GPIOB_PIN5, 0) | \
- PIN_AFIO_AF(GPIOB_SCL, 4) | \
- PIN_AFIO_AF(GPIOB_PIN7, 0))
-#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0) | \
- PIN_AFIO_AF(GPIOB_SDA, 4) | \
- PIN_AFIO_AF(GPIOB_CLK_IN, 0) | \
- PIN_AFIO_AF(GPIOB_PIN11, 0) | \
- PIN_AFIO_AF(GPIOB_PIN12, 0) | \
- PIN_AFIO_AF(GPIOB_PIN13, 0) | \
- PIN_AFIO_AF(GPIOB_PIN14, 0) | \
- PIN_AFIO_AF(GPIOB_PIN15, 0))
-
-/*
- * GPIOC setup:
- *
- * PC0 - OTG_FS_POWER_ON (output pushpull maximum).
- * PC1 - PIN1 (input pullup).
- * PC2 - PIN2 (input pullup).
- * PC3 - PDM_OUT (input pullup).
- * PC4 - PIN4 (input pullup).
- * PC5 - PIN5 (input pullup).
- * PC6 - PIN6 (input pullup).
- * PC7 - MCLK (alternate 6).
- * PC8 - PIN8 (input pullup).
- * PC9 - PIN9 (input pullup).
- * PC10 - SCLK (alternate 6).
- * PC11 - PIN11 (input pullup).
- * PC12 - SDIN (alternate 6).
- * PC13 - PIN13 (input pullup).
- * PC14 - PIN14 (input pullup).
- * PC15 - PIN15 (input pullup).
- */
-#define VAL_GPIOC_MODER (PIN_MODE_OUTPUT(GPIOC_OTG_FS_POWER_ON) |\
- PIN_MODE_INPUT(GPIOC_PIN1) | \
- PIN_MODE_INPUT(GPIOC_PIN2) | \
- PIN_MODE_INPUT(GPIOC_PDM_OUT) | \
- PIN_MODE_INPUT(GPIOC_PIN4) | \
- PIN_MODE_INPUT(GPIOC_PIN5) | \
- PIN_MODE_INPUT(GPIOC_PIN6) | \
- PIN_MODE_ALTERNATE(GPIOC_MCLK) | \
- PIN_MODE_INPUT(GPIOC_PIN8) | \
- PIN_MODE_INPUT(GPIOC_PIN9) | \
- PIN_MODE_ALTERNATE(GPIOC_SCLK) | \
- PIN_MODE_INPUT(GPIOC_PIN11) | \
- PIN_MODE_ALTERNATE(GPIOC_SDIN) | \
- PIN_MODE_INPUT(GPIOC_PIN13) | \
- PIN_MODE_INPUT(GPIOC_PIN14) | \
- PIN_MODE_INPUT(GPIOC_PIN15))
-#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_OTG_FS_POWER_ON) |\
- PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PDM_OUT) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN6) | \
- PIN_OTYPE_PUSHPULL(GPIOC_MCLK) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN8) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN9) | \
- PIN_OTYPE_PUSHPULL(GPIOC_SCLK) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | \
- PIN_OTYPE_PUSHPULL(GPIOC_SDIN) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN14) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN15))
-#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_100M(GPIOC_OTG_FS_POWER_ON) |\
- PIN_OSPEED_100M(GPIOC_PIN1) | \
- PIN_OSPEED_100M(GPIOC_PIN2) | \
- PIN_OSPEED_100M(GPIOC_PDM_OUT) | \
- PIN_OSPEED_100M(GPIOC_PIN4) | \
- PIN_OSPEED_100M(GPIOC_PIN5) | \
- PIN_OSPEED_100M(GPIOC_PIN6) | \
- PIN_OSPEED_100M(GPIOC_MCLK) | \
- PIN_OSPEED_100M(GPIOC_PIN8) | \
- PIN_OSPEED_100M(GPIOC_PIN9) | \
- PIN_OSPEED_100M(GPIOC_SCLK) | \
- PIN_OSPEED_100M(GPIOC_PIN11) | \
- PIN_OSPEED_100M(GPIOC_SDIN) | \
- PIN_OSPEED_100M(GPIOC_PIN13) | \
- PIN_OSPEED_100M(GPIOC_PIN14) | \
- PIN_OSPEED_100M(GPIOC_PIN15))
-#define VAL_GPIOC_PUPDR (PIN_PUPDR_FLOATING(GPIOC_OTG_FS_POWER_ON) |\
- PIN_PUPDR_PULLUP(GPIOC_PIN1) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN2) | \
- PIN_PUPDR_PULLUP(GPIOC_PDM_OUT) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN4) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN5) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN6) | \
- PIN_PUPDR_FLOATING(GPIOC_MCLK) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN8) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN9) | \
- PIN_PUPDR_FLOATING(GPIOC_SCLK) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN11) | \
- PIN_PUPDR_FLOATING(GPIOC_SDIN) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN13) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN14) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN15))
-#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_OTG_FS_POWER_ON) | \
- PIN_ODR_HIGH(GPIOC_PIN1) | \
- PIN_ODR_HIGH(GPIOC_PIN2) | \
- PIN_ODR_HIGH(GPIOC_PDM_OUT) | \
- PIN_ODR_HIGH(GPIOC_PIN4) | \
- PIN_ODR_HIGH(GPIOC_PIN5) | \
- PIN_ODR_HIGH(GPIOC_PIN6) | \
- PIN_ODR_HIGH(GPIOC_MCLK) | \
- PIN_ODR_HIGH(GPIOC_PIN8) | \
- PIN_ODR_HIGH(GPIOC_PIN9) | \
- PIN_ODR_HIGH(GPIOC_SCLK) | \
- PIN_ODR_HIGH(GPIOC_PIN11) | \
- PIN_ODR_HIGH(GPIOC_SDIN) | \
- PIN_ODR_HIGH(GPIOC_PIN13) | \
- PIN_ODR_HIGH(GPIOC_PIN14) | \
- PIN_ODR_HIGH(GPIOC_PIN15))
-#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_OTG_FS_POWER_ON, 0) |\
- PIN_AFIO_AF(GPIOC_PIN1, 0) | \
- PIN_AFIO_AF(GPIOC_PIN2, 0) | \
- PIN_AFIO_AF(GPIOC_PDM_OUT, 0) | \
- PIN_AFIO_AF(GPIOC_PIN4, 0) | \
- PIN_AFIO_AF(GPIOC_PIN5, 0) | \
- PIN_AFIO_AF(GPIOC_PIN6, 0) | \
- PIN_AFIO_AF(GPIOC_MCLK, 6))
-#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_PIN8, 0) | \
- PIN_AFIO_AF(GPIOC_PIN9, 0) | \
- PIN_AFIO_AF(GPIOC_SCLK, 6) | \
- PIN_AFIO_AF(GPIOC_PIN11, 0) | \
- PIN_AFIO_AF(GPIOC_SDIN, 6) | \
- PIN_AFIO_AF(GPIOC_PIN13, 0) | \
- PIN_AFIO_AF(GPIOC_PIN14, 0) | \
- PIN_AFIO_AF(GPIOC_PIN15, 0))
-
-/*
- * GPIOD setup:
- *
- * PD0 - PIN0 (input pullup).
- * PD1 - PIN1 (input pullup).
- * PD2 - PIN2 (input pullup).
- * PD3 - PIN3 (input pullup).
- * PD4 - RESET (output pushpull maximum).
- * PD5 - OVER_CURRENT (input floating).
- * PD6 - PIN6 (input pullup).
- * PD7 - PIN7 (input pullup).
- * PD8 - PIN8 (input pullup).
- * PD9 - PIN9 (input pullup).
- * PD10 - PIN10 (input pullup).
- * PD11 - PIN11 (input pullup).
- * PD12 - LED4 (output pushpull maximum).
- * PD13 - LED3 (output pushpull maximum).
- * PD14 - LED5 (output pushpull maximum).
- * PD15 - LED6 (output pushpull maximum).
- */
-#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | \
- PIN_MODE_INPUT(GPIOD_PIN1) | \
- PIN_MODE_INPUT(GPIOD_PIN2) | \
- PIN_MODE_INPUT(GPIOD_PIN3) | \
- PIN_MODE_OUTPUT(GPIOD_RESET) | \
- PIN_MODE_INPUT(GPIOD_OVER_CURRENT) | \
- PIN_MODE_INPUT(GPIOD_PIN6) | \
- PIN_MODE_INPUT(GPIOD_PIN7) | \
- PIN_MODE_INPUT(GPIOD_PIN8) | \
- PIN_MODE_INPUT(GPIOD_PIN9) | \
- PIN_MODE_INPUT(GPIOD_PIN10) | \
- PIN_MODE_INPUT(GPIOD_PIN11) | \
- PIN_MODE_OUTPUT(GPIOD_LED4) | \
- PIN_MODE_OUTPUT(GPIOD_LED3) | \
- PIN_MODE_OUTPUT(GPIOD_LED5) | \
- PIN_MODE_OUTPUT(GPIOD_LED6))
-#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | \
- PIN_OTYPE_PUSHPULL(GPIOD_RESET) | \
- PIN_OTYPE_PUSHPULL(GPIOD_OVER_CURRENT) |\
- PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | \
- PIN_OTYPE_PUSHPULL(GPIOD_LED4) | \
- PIN_OTYPE_PUSHPULL(GPIOD_LED3) | \
- PIN_OTYPE_PUSHPULL(GPIOD_LED5) | \
- PIN_OTYPE_PUSHPULL(GPIOD_LED6))
-#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_100M(GPIOD_PIN0) | \
- PIN_OSPEED_100M(GPIOD_PIN1) | \
- PIN_OSPEED_100M(GPIOD_PIN2) | \
- PIN_OSPEED_100M(GPIOD_PIN3) | \
- PIN_OSPEED_100M(GPIOD_RESET) | \
- PIN_OSPEED_100M(GPIOD_OVER_CURRENT) | \
- PIN_OSPEED_100M(GPIOD_PIN6) | \
- PIN_OSPEED_100M(GPIOD_PIN7) | \
- PIN_OSPEED_100M(GPIOD_PIN8) | \
- PIN_OSPEED_100M(GPIOD_PIN9) | \
- PIN_OSPEED_100M(GPIOD_PIN10) | \
- PIN_OSPEED_100M(GPIOD_PIN11) | \
- PIN_OSPEED_100M(GPIOD_LED4) | \
- PIN_OSPEED_100M(GPIOD_LED3) | \
- PIN_OSPEED_100M(GPIOD_LED5) | \
- PIN_OSPEED_100M(GPIOD_LED6))
-#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN1) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN2) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN3) | \
- PIN_PUPDR_FLOATING(GPIOD_RESET) | \
- PIN_PUPDR_FLOATING(GPIOD_OVER_CURRENT) |\
- PIN_PUPDR_PULLUP(GPIOD_PIN6) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN7) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN8) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN9) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN10) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN11) | \
- PIN_PUPDR_FLOATING(GPIOD_LED4) | \
- PIN_PUPDR_FLOATING(GPIOD_LED3) | \
- PIN_PUPDR_FLOATING(GPIOD_LED5) | \
- PIN_PUPDR_FLOATING(GPIOD_LED6))
-#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | \
- PIN_ODR_HIGH(GPIOD_PIN1) | \
- PIN_ODR_HIGH(GPIOD_PIN2) | \
- PIN_ODR_HIGH(GPIOD_PIN3) | \
- PIN_ODR_HIGH(GPIOD_RESET) | \
- PIN_ODR_HIGH(GPIOD_OVER_CURRENT) | \
- PIN_ODR_HIGH(GPIOD_PIN6) | \
- PIN_ODR_HIGH(GPIOD_PIN7) | \
- PIN_ODR_HIGH(GPIOD_PIN8) | \
- PIN_ODR_HIGH(GPIOD_PIN9) | \
- PIN_ODR_HIGH(GPIOD_PIN10) | \
- PIN_ODR_HIGH(GPIOD_PIN11) | \
- PIN_ODR_LOW(GPIOD_LED4) | \
- PIN_ODR_LOW(GPIOD_LED3) | \
- PIN_ODR_LOW(GPIOD_LED5) | \
- PIN_ODR_LOW(GPIOD_LED6))
-#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0) | \
- PIN_AFIO_AF(GPIOD_PIN1, 0) | \
- PIN_AFIO_AF(GPIOD_PIN2, 0) | \
- PIN_AFIO_AF(GPIOD_PIN3, 0) | \
- PIN_AFIO_AF(GPIOD_RESET, 0) | \
- PIN_AFIO_AF(GPIOD_OVER_CURRENT, 0) | \
- PIN_AFIO_AF(GPIOD_PIN6, 0) | \
- PIN_AFIO_AF(GPIOD_PIN7, 0))
-#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0) | \
- PIN_AFIO_AF(GPIOD_PIN9, 0) | \
- PIN_AFIO_AF(GPIOD_PIN10, 0) | \
- PIN_AFIO_AF(GPIOD_PIN11, 0) | \
- PIN_AFIO_AF(GPIOD_LED4, 0) | \
- PIN_AFIO_AF(GPIOD_LED3, 0) | \
- PIN_AFIO_AF(GPIOD_LED5, 0) | \
- PIN_AFIO_AF(GPIOD_LED6, 0))
-
-/*
- * GPIOE setup:
- *
- * PE0 - INT1 (input floating).
- * PE1 - INT2 (input floating).
- * PE2 - PIN2 (input floating).
- * PE3 - CS_SPI (output pushpull maximum).
- * PE4 - PIN4 (input floating).
- * PE5 - PIN5 (input floating).
- * PE6 - PIN6 (input floating).
- * PE7 - PIN7 (input floating).
- * PE8 - PIN8 (input floating).
- * PE9 - PIN9 (input floating).
- * PE10 - PIN10 (input floating).
- * PE11 - PIN11 (input floating).
- * PE12 - PIN12 (input floating).
- * PE13 - PIN13 (input floating).
- * PE14 - PIN14 (input floating).
- * PE15 - PIN15 (input floating).
- */
-#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_INT1) | \
- PIN_MODE_INPUT(GPIOE_INT2) | \
- PIN_MODE_INPUT(GPIOE_PIN2) | \
- PIN_MODE_OUTPUT(GPIOE_CS_SPI) | \
- PIN_MODE_INPUT(GPIOE_PIN4) | \
- PIN_MODE_INPUT(GPIOE_PIN5) | \
- PIN_MODE_INPUT(GPIOE_PIN6) | \
- PIN_MODE_INPUT(GPIOE_PIN7) | \
- PIN_MODE_INPUT(GPIOE_PIN8) | \
- PIN_MODE_INPUT(GPIOE_PIN9) | \
- PIN_MODE_INPUT(GPIOE_PIN10) | \
- PIN_MODE_INPUT(GPIOE_PIN11) | \
- PIN_MODE_INPUT(GPIOE_PIN12) | \
- PIN_MODE_INPUT(GPIOE_PIN13) | \
- PIN_MODE_INPUT(GPIOE_PIN14) | \
- PIN_MODE_INPUT(GPIOE_PIN15))
-#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_INT1) | \
- PIN_OTYPE_PUSHPULL(GPIOE_INT2) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN2) | \
- PIN_OTYPE_PUSHPULL(GPIOE_CS_SPI) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN4) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN5) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN10) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN14) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN15))
-#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_100M(GPIOE_INT1) | \
- PIN_OSPEED_100M(GPIOE_INT2) | \
- PIN_OSPEED_100M(GPIOE_PIN2) | \
- PIN_OSPEED_100M(GPIOE_CS_SPI) | \
- PIN_OSPEED_100M(GPIOE_PIN4) | \
- PIN_OSPEED_100M(GPIOE_PIN5) | \
- PIN_OSPEED_100M(GPIOE_PIN6) | \
- PIN_OSPEED_100M(GPIOE_PIN7) | \
- PIN_OSPEED_100M(GPIOE_PIN8) | \
- PIN_OSPEED_100M(GPIOE_PIN9) | \
- PIN_OSPEED_100M(GPIOE_PIN10) | \
- PIN_OSPEED_100M(GPIOE_PIN11) | \
- PIN_OSPEED_100M(GPIOE_PIN12) | \
- PIN_OSPEED_100M(GPIOE_PIN13) | \
- PIN_OSPEED_100M(GPIOE_PIN14) | \
- PIN_OSPEED_100M(GPIOE_PIN15))
-#define VAL_GPIOE_PUPDR (PIN_PUPDR_FLOATING(GPIOE_INT1) | \
- PIN_PUPDR_FLOATING(GPIOE_INT2) | \
- PIN_PUPDR_FLOATING(GPIOE_PIN2) | \
- PIN_PUPDR_FLOATING(GPIOE_CS_SPI) | \
- PIN_PUPDR_FLOATING(GPIOE_PIN4) | \
- PIN_PUPDR_FLOATING(GPIOE_PIN5) | \
- PIN_PUPDR_FLOATING(GPIOE_PIN6) | \
- PIN_PUPDR_FLOATING(GPIOE_PIN7) | \
- PIN_PUPDR_FLOATING(GPIOE_PIN8) | \
- PIN_PUPDR_FLOATING(GPIOE_PIN9) | \
- PIN_PUPDR_FLOATING(GPIOE_PIN10) | \
- PIN_PUPDR_FLOATING(GPIOE_PIN11) | \
- PIN_PUPDR_FLOATING(GPIOE_PIN12) | \
- PIN_PUPDR_FLOATING(GPIOE_PIN13) | \
- PIN_PUPDR_FLOATING(GPIOE_PIN14) | \
- PIN_PUPDR_FLOATING(GPIOE_PIN15))
-#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_INT1) | \
- PIN_ODR_HIGH(GPIOE_INT2) | \
- PIN_ODR_HIGH(GPIOE_PIN2) | \
- PIN_ODR_HIGH(GPIOE_CS_SPI) | \
- PIN_ODR_HIGH(GPIOE_PIN4) | \
- PIN_ODR_HIGH(GPIOE_PIN5) | \
- PIN_ODR_HIGH(GPIOE_PIN6) | \
- PIN_ODR_HIGH(GPIOE_PIN7) | \
- PIN_ODR_HIGH(GPIOE_PIN8) | \
- PIN_ODR_HIGH(GPIOE_PIN9) | \
- PIN_ODR_HIGH(GPIOE_PIN10) | \
- PIN_ODR_HIGH(GPIOE_PIN11) | \
- PIN_ODR_HIGH(GPIOE_PIN12) | \
- PIN_ODR_HIGH(GPIOE_PIN13) | \
- PIN_ODR_HIGH(GPIOE_PIN14) | \
- PIN_ODR_HIGH(GPIOE_PIN15))
-#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_INT1, 0) | \
- PIN_AFIO_AF(GPIOE_INT2, 0) | \
- PIN_AFIO_AF(GPIOE_PIN2, 0) | \
- PIN_AFIO_AF(GPIOE_CS_SPI, 0) | \
- PIN_AFIO_AF(GPIOE_PIN4, 0) | \
- PIN_AFIO_AF(GPIOE_PIN5, 0) | \
- PIN_AFIO_AF(GPIOE_PIN6, 0) | \
- PIN_AFIO_AF(GPIOE_PIN7, 0))
-#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0) | \
- PIN_AFIO_AF(GPIOE_PIN9, 0) | \
- PIN_AFIO_AF(GPIOE_PIN10, 0) | \
- PIN_AFIO_AF(GPIOE_PIN11, 0) | \
- PIN_AFIO_AF(GPIOE_PIN12, 0) | \
- PIN_AFIO_AF(GPIOE_PIN13, 0) | \
- PIN_AFIO_AF(GPIOE_PIN14, 0) | \
- PIN_AFIO_AF(GPIOE_PIN15, 0))
-
-/*
- * GPIOF setup:
- *
- * PF0 - PIN0 (input floating).
- * PF1 - PIN1 (input floating).
- * PF2 - PIN2 (input floating).
- * PF3 - PIN3 (input floating).
- * PF4 - PIN4 (input floating).
- * PF5 - PIN5 (input floating).
- * PF6 - PIN6 (input floating).
- * PF7 - PIN7 (input floating).
- * PF8 - PIN8 (input floating).
- * PF9 - PIN9 (input floating).
- * PF10 - PIN10 (input floating).
- * PF11 - PIN11 (input floating).
- * PF12 - PIN12 (input floating).
- * PF13 - PIN13 (input floating).
- * PF14 - PIN14 (input floating).
- * PF15 - PIN15 (input floating).
- */
-#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_PIN0) | \
- PIN_MODE_INPUT(GPIOF_PIN1) | \
- PIN_MODE_INPUT(GPIOF_PIN2) | \
- PIN_MODE_INPUT(GPIOF_PIN3) | \
- PIN_MODE_INPUT(GPIOF_PIN4) | \
- PIN_MODE_INPUT(GPIOF_PIN5) | \
- PIN_MODE_INPUT(GPIOF_PIN6) | \
- PIN_MODE_INPUT(GPIOF_PIN7) | \
- PIN_MODE_INPUT(GPIOF_PIN8) | \
- PIN_MODE_INPUT(GPIOF_PIN9) | \
- PIN_MODE_INPUT(GPIOF_PIN10) | \
- PIN_MODE_INPUT(GPIOF_PIN11) | \
- PIN_MODE_INPUT(GPIOF_PIN12) | \
- PIN_MODE_INPUT(GPIOF_PIN13) | \
- PIN_MODE_INPUT(GPIOF_PIN14) | \
- PIN_MODE_INPUT(GPIOF_PIN15))
-#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_PIN0) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN1) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN15))
-#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_100M(GPIOF_PIN0) | \
- PIN_OSPEED_100M(GPIOF_PIN1) | \
- PIN_OSPEED_100M(GPIOF_PIN2) | \
- PIN_OSPEED_100M(GPIOF_PIN3) | \
- PIN_OSPEED_100M(GPIOF_PIN4) | \
- PIN_OSPEED_100M(GPIOF_PIN5) | \
- PIN_OSPEED_100M(GPIOF_PIN6) | \
- PIN_OSPEED_100M(GPIOF_PIN7) | \
- PIN_OSPEED_100M(GPIOF_PIN8) | \
- PIN_OSPEED_100M(GPIOF_PIN9) | \
- PIN_OSPEED_100M(GPIOF_PIN10) | \
- PIN_OSPEED_100M(GPIOF_PIN11) | \
- PIN_OSPEED_100M(GPIOF_PIN12) | \
- PIN_OSPEED_100M(GPIOF_PIN13) | \
- PIN_OSPEED_100M(GPIOF_PIN14) | \
- PIN_OSPEED_100M(GPIOF_PIN15))
-#define VAL_GPIOF_PUPDR (PIN_PUPDR_FLOATING(GPIOF_PIN0) | \
- PIN_PUPDR_FLOATING(GPIOF_PIN1) | \
- PIN_PUPDR_FLOATING(GPIOF_PIN2) | \
- PIN_PUPDR_FLOATING(GPIOF_PIN3) | \
- PIN_PUPDR_FLOATING(GPIOF_PIN4) | \
- PIN_PUPDR_FLOATING(GPIOF_PIN5) | \
- PIN_PUPDR_FLOATING(GPIOF_PIN6) | \
- PIN_PUPDR_FLOATING(GPIOF_PIN7) | \
- PIN_PUPDR_FLOATING(GPIOF_PIN8) | \
- PIN_PUPDR_FLOATING(GPIOF_PIN9) | \
- PIN_PUPDR_FLOATING(GPIOF_PIN10) | \
- PIN_PUPDR_FLOATING(GPIOF_PIN11) | \
- PIN_PUPDR_FLOATING(GPIOF_PIN12) | \
- PIN_PUPDR_FLOATING(GPIOF_PIN13) | \
- PIN_PUPDR_FLOATING(GPIOF_PIN14) | \
- PIN_PUPDR_FLOATING(GPIOF_PIN15))
-#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_PIN0) | \
- PIN_ODR_HIGH(GPIOF_PIN1) | \
- PIN_ODR_HIGH(GPIOF_PIN2) | \
- PIN_ODR_HIGH(GPIOF_PIN3) | \
- PIN_ODR_HIGH(GPIOF_PIN4) | \
- PIN_ODR_HIGH(GPIOF_PIN5) | \
- PIN_ODR_HIGH(GPIOF_PIN6) | \
- PIN_ODR_HIGH(GPIOF_PIN7) | \
- PIN_ODR_HIGH(GPIOF_PIN8) | \
- PIN_ODR_HIGH(GPIOF_PIN9) | \
- PIN_ODR_HIGH(GPIOF_PIN10) | \
- PIN_ODR_HIGH(GPIOF_PIN11) | \
- PIN_ODR_HIGH(GPIOF_PIN12) | \
- PIN_ODR_HIGH(GPIOF_PIN13) | \
- PIN_ODR_HIGH(GPIOF_PIN14) | \
- PIN_ODR_HIGH(GPIOF_PIN15))
-#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_PIN0, 0) | \
- PIN_AFIO_AF(GPIOF_PIN1, 0) | \
- PIN_AFIO_AF(GPIOF_PIN2, 0) | \
- PIN_AFIO_AF(GPIOF_PIN3, 0) | \
- PIN_AFIO_AF(GPIOF_PIN4, 0) | \
- PIN_AFIO_AF(GPIOF_PIN5, 0) | \
- PIN_AFIO_AF(GPIOF_PIN6, 0) | \
- PIN_AFIO_AF(GPIOF_PIN7, 0))
-#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0) | \
- PIN_AFIO_AF(GPIOF_PIN9, 0) | \
- PIN_AFIO_AF(GPIOF_PIN10, 0) | \
- PIN_AFIO_AF(GPIOF_PIN11, 0) | \
- PIN_AFIO_AF(GPIOF_PIN12, 0) | \
- PIN_AFIO_AF(GPIOF_PIN13, 0) | \
- PIN_AFIO_AF(GPIOF_PIN14, 0) | \
- PIN_AFIO_AF(GPIOF_PIN15, 0))
-
-/*
- * GPIOG setup:
- *
- * PG0 - PIN0 (input floating).
- * PG1 - PIN1 (input floating).
- * PG2 - PIN2 (input floating).
- * PG3 - PIN3 (input floating).
- * PG4 - PIN4 (input floating).
- * PG5 - PIN5 (input floating).
- * PG6 - PIN6 (input floating).
- * PG7 - PIN7 (input floating).
- * PG8 - PIN8 (input floating).
- * PG9 - PIN9 (input floating).
- * PG10 - PIN10 (input floating).
- * PG11 - PIN11 (input floating).
- * PG12 - PIN12 (input floating).
- * PG13 - PIN13 (input floating).
- * PG14 - PIN14 (input floating).
- * PG15 - PIN15 (input floating).
- */
-#define VAL_GPIOG_MODER (PIN_MODE_INPUT(GPIOG_PIN0) | \
- PIN_MODE_INPUT(GPIOG_PIN1) | \
- PIN_MODE_INPUT(GPIOG_PIN2) | \
- PIN_MODE_INPUT(GPIOG_PIN3) | \
- PIN_MODE_INPUT(GPIOG_PIN4) | \
- PIN_MODE_INPUT(GPIOG_PIN5) | \
- PIN_MODE_INPUT(GPIOG_PIN6) | \
- PIN_MODE_INPUT(GPIOG_PIN7) | \
- PIN_MODE_INPUT(GPIOG_PIN8) | \
- PIN_MODE_INPUT(GPIOG_PIN9) | \
- PIN_MODE_INPUT(GPIOG_PIN10) | \
- PIN_MODE_INPUT(GPIOG_PIN11) | \
- PIN_MODE_INPUT(GPIOG_PIN12) | \
- PIN_MODE_INPUT(GPIOG_PIN13) | \
- PIN_MODE_INPUT(GPIOG_PIN14) | \
- PIN_MODE_INPUT(GPIOG_PIN15))
-#define VAL_GPIOG_OTYPER (PIN_OTYPE_PUSHPULL(GPIOG_PIN0) | \
- PIN_OTYPE_PUSHPULL(GPIOG_PIN1) | \
- PIN_OTYPE_PUSHPULL(GPIOG_PIN2) | \
- PIN_OTYPE_PUSHPULL(GPIOG_PIN3) | \
- PIN_OTYPE_PUSHPULL(GPIOG_PIN4) | \
- PIN_OTYPE_PUSHPULL(GPIOG_PIN5) | \
- PIN_OTYPE_PUSHPULL(GPIOG_PIN6) | \
- PIN_OTYPE_PUSHPULL(GPIOG_PIN7) | \
- PIN_OTYPE_PUSHPULL(GPIOG_PIN8) | \
- PIN_OTYPE_PUSHPULL(GPIOG_PIN9) | \
- PIN_OTYPE_PUSHPULL(GPIOG_PIN10) | \
- PIN_OTYPE_PUSHPULL(GPIOG_PIN11) | \
- PIN_OTYPE_PUSHPULL(GPIOG_PIN12) | \
- PIN_OTYPE_PUSHPULL(GPIOG_PIN13) | \
- PIN_OTYPE_PUSHPULL(GPIOG_PIN14) | \
- PIN_OTYPE_PUSHPULL(GPIOG_PIN15))
-#define VAL_GPIOG_OSPEEDR (PIN_OSPEED_100M(GPIOG_PIN0) | \
- PIN_OSPEED_100M(GPIOG_PIN1) | \
- PIN_OSPEED_100M(GPIOG_PIN2) | \
- PIN_OSPEED_100M(GPIOG_PIN3) | \
- PIN_OSPEED_100M(GPIOG_PIN4) | \
- PIN_OSPEED_100M(GPIOG_PIN5) | \
- PIN_OSPEED_100M(GPIOG_PIN6) | \
- PIN_OSPEED_100M(GPIOG_PIN7) | \
- PIN_OSPEED_100M(GPIOG_PIN8) | \
- PIN_OSPEED_100M(GPIOG_PIN9) | \
- PIN_OSPEED_100M(GPIOG_PIN10) | \
- PIN_OSPEED_100M(GPIOG_PIN11) | \
- PIN_OSPEED_100M(GPIOG_PIN12) | \
- PIN_OSPEED_100M(GPIOG_PIN13) | \
- PIN_OSPEED_100M(GPIOG_PIN14) | \
- PIN_OSPEED_100M(GPIOG_PIN15))
-#define VAL_GPIOG_PUPDR (PIN_PUPDR_FLOATING(GPIOG_PIN0) | \
- PIN_PUPDR_FLOATING(GPIOG_PIN1) | \
- PIN_PUPDR_FLOATING(GPIOG_PIN2) | \
- PIN_PUPDR_FLOATING(GPIOG_PIN3) | \
- PIN_PUPDR_FLOATING(GPIOG_PIN4) | \
- PIN_PUPDR_FLOATING(GPIOG_PIN5) | \
- PIN_PUPDR_FLOATING(GPIOG_PIN6) | \
- PIN_PUPDR_FLOATING(GPIOG_PIN7) | \
- PIN_PUPDR_FLOATING(GPIOG_PIN8) | \
- PIN_PUPDR_FLOATING(GPIOG_PIN9) | \
- PIN_PUPDR_FLOATING(GPIOG_PIN10) | \
- PIN_PUPDR_FLOATING(GPIOG_PIN11) | \
- PIN_PUPDR_FLOATING(GPIOG_PIN12) | \
- PIN_PUPDR_FLOATING(GPIOG_PIN13) | \
- PIN_PUPDR_FLOATING(GPIOG_PIN14) | \
- PIN_PUPDR_FLOATING(GPIOG_PIN15))
-#define VAL_GPIOG_ODR (PIN_ODR_HIGH(GPIOG_PIN0) | \
- PIN_ODR_HIGH(GPIOG_PIN1) | \
- PIN_ODR_HIGH(GPIOG_PIN2) | \
- PIN_ODR_HIGH(GPIOG_PIN3) | \
- PIN_ODR_HIGH(GPIOG_PIN4) | \
- PIN_ODR_HIGH(GPIOG_PIN5) | \
- PIN_ODR_HIGH(GPIOG_PIN6) | \
- PIN_ODR_HIGH(GPIOG_PIN7) | \
- PIN_ODR_HIGH(GPIOG_PIN8) | \
- PIN_ODR_HIGH(GPIOG_PIN9) | \
- PIN_ODR_HIGH(GPIOG_PIN10) | \
- PIN_ODR_HIGH(GPIOG_PIN11) | \
- PIN_ODR_HIGH(GPIOG_PIN12) | \
- PIN_ODR_HIGH(GPIOG_PIN13) | \
- PIN_ODR_HIGH(GPIOG_PIN14) | \
- PIN_ODR_HIGH(GPIOG_PIN15))
-#define VAL_GPIOG_AFRL (PIN_AFIO_AF(GPIOG_PIN0, 0) | \
- PIN_AFIO_AF(GPIOG_PIN1, 0) | \
- PIN_AFIO_AF(GPIOG_PIN2, 0) | \
- PIN_AFIO_AF(GPIOG_PIN3, 0) | \
- PIN_AFIO_AF(GPIOG_PIN4, 0) | \
- PIN_AFIO_AF(GPIOG_PIN5, 0) | \
- PIN_AFIO_AF(GPIOG_PIN6, 0) | \
- PIN_AFIO_AF(GPIOG_PIN7, 0))
-#define VAL_GPIOG_AFRH (PIN_AFIO_AF(GPIOG_PIN8, 0) | \
- PIN_AFIO_AF(GPIOG_PIN9, 0) | \
- PIN_AFIO_AF(GPIOG_PIN10, 0) | \
- PIN_AFIO_AF(GPIOG_PIN11, 0) | \
- PIN_AFIO_AF(GPIOG_PIN12, 0) | \
- PIN_AFIO_AF(GPIOG_PIN13, 0) | \
- PIN_AFIO_AF(GPIOG_PIN14, 0) | \
- PIN_AFIO_AF(GPIOG_PIN15, 0))
-
-/*
- * GPIOH setup:
- *
- * PH0 - OSC_IN (input floating).
- * PH1 - OSC_OUT (input floating).
- * PH2 - PIN2 (input floating).
- * PH3 - PIN3 (input floating).
- * PH4 - PIN4 (input floating).
- * PH5 - PIN5 (input floating).
- * PH6 - PIN6 (input floating).
- * PH7 - PIN7 (input floating).
- * PH8 - PIN8 (input floating).
- * PH9 - PIN9 (input floating).
- * PH10 - PIN10 (input floating).
- * PH11 - PIN11 (input floating).
- * PH12 - PIN12 (input floating).
- * PH13 - PIN13 (input floating).
- * PH14 - PIN14 (input floating).
- * PH15 - PIN15 (input floating).
- */
-#define VAL_GPIOH_MODER (PIN_MODE_INPUT(GPIOH_OSC_IN) | \
- PIN_MODE_INPUT(GPIOH_OSC_OUT) | \
- PIN_MODE_INPUT(GPIOH_PIN2) | \
- PIN_MODE_INPUT(GPIOH_PIN3) | \
- PIN_MODE_INPUT(GPIOH_PIN4) | \
- PIN_MODE_INPUT(GPIOH_PIN5) | \
- PIN_MODE_INPUT(GPIOH_PIN6) | \
- PIN_MODE_INPUT(GPIOH_PIN7) | \
- PIN_MODE_INPUT(GPIOH_PIN8) | \
- PIN_MODE_INPUT(GPIOH_PIN9) | \
- PIN_MODE_INPUT(GPIOH_PIN10) | \
- PIN_MODE_INPUT(GPIOH_PIN11) | \
- PIN_MODE_INPUT(GPIOH_PIN12) | \
- PIN_MODE_INPUT(GPIOH_PIN13) | \
- PIN_MODE_INPUT(GPIOH_PIN14) | \
- PIN_MODE_INPUT(GPIOH_PIN15))
-#define VAL_GPIOH_OTYPER (PIN_OTYPE_PUSHPULL(GPIOH_OSC_IN) | \
- PIN_OTYPE_PUSHPULL(GPIOH_OSC_OUT) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN2) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN3) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN4) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN5) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN6) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN7) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN8) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN9) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN10) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN11) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN12) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN13) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN14) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN15))
-#define VAL_GPIOH_OSPEEDR (PIN_OSPEED_100M(GPIOH_OSC_IN) | \
- PIN_OSPEED_100M(GPIOH_OSC_OUT) | \
- PIN_OSPEED_100M(GPIOH_PIN2) | \
- PIN_OSPEED_100M(GPIOH_PIN3) | \
- PIN_OSPEED_100M(GPIOH_PIN4) | \
- PIN_OSPEED_100M(GPIOH_PIN5) | \
- PIN_OSPEED_100M(GPIOH_PIN6) | \
- PIN_OSPEED_100M(GPIOH_PIN7) | \
- PIN_OSPEED_100M(GPIOH_PIN8) | \
- PIN_OSPEED_100M(GPIOH_PIN9) | \
- PIN_OSPEED_100M(GPIOH_PIN10) | \
- PIN_OSPEED_100M(GPIOH_PIN11) | \
- PIN_OSPEED_100M(GPIOH_PIN12) | \
- PIN_OSPEED_100M(GPIOH_PIN13) | \
- PIN_OSPEED_100M(GPIOH_PIN14) | \
- PIN_OSPEED_100M(GPIOH_PIN15))
-#define VAL_GPIOH_PUPDR (PIN_PUPDR_FLOATING(GPIOH_OSC_IN) | \
- PIN_PUPDR_FLOATING(GPIOH_OSC_OUT) | \
- PIN_PUPDR_FLOATING(GPIOH_PIN2) | \
- PIN_PUPDR_FLOATING(GPIOH_PIN3) | \
- PIN_PUPDR_FLOATING(GPIOH_PIN4) | \
- PIN_PUPDR_FLOATING(GPIOH_PIN5) | \
- PIN_PUPDR_FLOATING(GPIOH_PIN6) | \
- PIN_PUPDR_FLOATING(GPIOH_PIN7) | \
- PIN_PUPDR_FLOATING(GPIOH_PIN8) | \
- PIN_PUPDR_FLOATING(GPIOH_PIN9) | \
- PIN_PUPDR_FLOATING(GPIOH_PIN10) | \
- PIN_PUPDR_FLOATING(GPIOH_PIN11) | \
- PIN_PUPDR_FLOATING(GPIOH_PIN12) | \
- PIN_PUPDR_FLOATING(GPIOH_PIN13) | \
- PIN_PUPDR_FLOATING(GPIOH_PIN14) | \
- PIN_PUPDR_FLOATING(GPIOH_PIN15))
-#define VAL_GPIOH_ODR (PIN_ODR_HIGH(GPIOH_OSC_IN) | \
- PIN_ODR_HIGH(GPIOH_OSC_OUT) | \
- PIN_ODR_HIGH(GPIOH_PIN2) | \
- PIN_ODR_HIGH(GPIOH_PIN3) | \
- PIN_ODR_HIGH(GPIOH_PIN4) | \
- PIN_ODR_HIGH(GPIOH_PIN5) | \
- PIN_ODR_HIGH(GPIOH_PIN6) | \
- PIN_ODR_HIGH(GPIOH_PIN7) | \
- PIN_ODR_HIGH(GPIOH_PIN8) | \
- PIN_ODR_HIGH(GPIOH_PIN9) | \
- PIN_ODR_HIGH(GPIOH_PIN10) | \
- PIN_ODR_HIGH(GPIOH_PIN11) | \
- PIN_ODR_HIGH(GPIOH_PIN12) | \
- PIN_ODR_HIGH(GPIOH_PIN13) | \
- PIN_ODR_HIGH(GPIOH_PIN14) | \
- PIN_ODR_HIGH(GPIOH_PIN15))
-#define VAL_GPIOH_AFRL (PIN_AFIO_AF(GPIOH_OSC_IN, 0) | \
- PIN_AFIO_AF(GPIOH_OSC_OUT, 0) | \
- PIN_AFIO_AF(GPIOH_PIN2, 0) | \
- PIN_AFIO_AF(GPIOH_PIN3, 0) | \
- PIN_AFIO_AF(GPIOH_PIN4, 0) | \
- PIN_AFIO_AF(GPIOH_PIN5, 0) | \
- PIN_AFIO_AF(GPIOH_PIN6, 0) | \
- PIN_AFIO_AF(GPIOH_PIN7, 0))
-#define VAL_GPIOH_AFRH (PIN_AFIO_AF(GPIOH_PIN8, 0) | \
- PIN_AFIO_AF(GPIOH_PIN9, 0) | \
- PIN_AFIO_AF(GPIOH_PIN10, 0) | \
- PIN_AFIO_AF(GPIOH_PIN11, 0) | \
- PIN_AFIO_AF(GPIOH_PIN12, 0) | \
- PIN_AFIO_AF(GPIOH_PIN13, 0) | \
- PIN_AFIO_AF(GPIOH_PIN14, 0) | \
- PIN_AFIO_AF(GPIOH_PIN15, 0))
-
-/*
- * GPIOI setup:
- *
- * PI0 - PIN0 (input floating).
- * PI1 - PIN1 (input floating).
- * PI2 - PIN2 (input floating).
- * PI3 - PIN3 (input floating).
- * PI4 - PIN4 (input floating).
- * PI5 - PIN5 (input floating).
- * PI6 - PIN6 (input floating).
- * PI7 - PIN7 (input floating).
- * PI8 - PIN8 (input floating).
- * PI9 - PIN9 (input floating).
- * PI10 - PIN10 (input floating).
- * PI11 - PIN11 (input floating).
- * PI12 - PIN12 (input floating).
- * PI13 - PIN13 (input floating).
- * PI14 - PIN14 (input floating).
- * PI15 - PIN15 (input floating).
- */
-#define VAL_GPIOI_MODER (PIN_MODE_INPUT(GPIOI_PIN0) | \
- PIN_MODE_INPUT(GPIOI_PIN1) | \
- PIN_MODE_INPUT(GPIOI_PIN2) | \
- PIN_MODE_INPUT(GPIOI_PIN3) | \
- PIN_MODE_INPUT(GPIOI_PIN4) | \
- PIN_MODE_INPUT(GPIOI_PIN5) | \
- PIN_MODE_INPUT(GPIOI_PIN6) | \
- PIN_MODE_INPUT(GPIOI_PIN7) | \
- PIN_MODE_INPUT(GPIOI_PIN8) | \
- PIN_MODE_INPUT(GPIOI_PIN9) | \
- PIN_MODE_INPUT(GPIOI_PIN10) | \
- PIN_MODE_INPUT(GPIOI_PIN11) | \
- PIN_MODE_INPUT(GPIOI_PIN12) | \
- PIN_MODE_INPUT(GPIOI_PIN13) | \
- PIN_MODE_INPUT(GPIOI_PIN14) | \
- PIN_MODE_INPUT(GPIOI_PIN15))
-#define VAL_GPIOI_OTYPER (PIN_OTYPE_PUSHPULL(GPIOI_PIN0) | \
- PIN_OTYPE_PUSHPULL(GPIOI_PIN1) | \
- PIN_OTYPE_PUSHPULL(GPIOI_PIN2) | \
- PIN_OTYPE_PUSHPULL(GPIOI_PIN3) | \
- PIN_OTYPE_PUSHPULL(GPIOI_PIN4) | \
- PIN_OTYPE_PUSHPULL(GPIOI_PIN5) | \
- PIN_OTYPE_PUSHPULL(GPIOI_PIN6) | \
- PIN_OTYPE_PUSHPULL(GPIOI_PIN7) | \
- PIN_OTYPE_PUSHPULL(GPIOI_PIN8) | \
- PIN_OTYPE_PUSHPULL(GPIOI_PIN9) | \
- PIN_OTYPE_PUSHPULL(GPIOI_PIN10) | \
- PIN_OTYPE_PUSHPULL(GPIOI_PIN11) | \
- PIN_OTYPE_PUSHPULL(GPIOI_PIN12) | \
- PIN_OTYPE_PUSHPULL(GPIOI_PIN13) | \
- PIN_OTYPE_PUSHPULL(GPIOI_PIN14) | \
- PIN_OTYPE_PUSHPULL(GPIOI_PIN15))
-#define VAL_GPIOI_OSPEEDR (PIN_OSPEED_100M(GPIOI_PIN0) | \
- PIN_OSPEED_100M(GPIOI_PIN1) | \
- PIN_OSPEED_100M(GPIOI_PIN2) | \
- PIN_OSPEED_100M(GPIOI_PIN3) | \
- PIN_OSPEED_100M(GPIOI_PIN4) | \
- PIN_OSPEED_100M(GPIOI_PIN5) | \
- PIN_OSPEED_100M(GPIOI_PIN6) | \
- PIN_OSPEED_100M(GPIOI_PIN7) | \
- PIN_OSPEED_100M(GPIOI_PIN8) | \
- PIN_OSPEED_100M(GPIOI_PIN9) | \
- PIN_OSPEED_100M(GPIOI_PIN10) | \
- PIN_OSPEED_100M(GPIOI_PIN11) | \
- PIN_OSPEED_100M(GPIOI_PIN12) | \
- PIN_OSPEED_100M(GPIOI_PIN13) | \
- PIN_OSPEED_100M(GPIOI_PIN14) | \
- PIN_OSPEED_100M(GPIOI_PIN15))
-#define VAL_GPIOI_PUPDR (PIN_PUPDR_FLOATING(GPIOI_PIN0) | \
- PIN_PUPDR_FLOATING(GPIOI_PIN1) | \
- PIN_PUPDR_FLOATING(GPIOI_PIN2) | \
- PIN_PUPDR_FLOATING(GPIOI_PIN3) | \
- PIN_PUPDR_FLOATING(GPIOI_PIN4) | \
- PIN_PUPDR_FLOATING(GPIOI_PIN5) | \
- PIN_PUPDR_FLOATING(GPIOI_PIN6) | \
- PIN_PUPDR_FLOATING(GPIOI_PIN7) | \
- PIN_PUPDR_FLOATING(GPIOI_PIN8) | \
- PIN_PUPDR_FLOATING(GPIOI_PIN9) | \
- PIN_PUPDR_FLOATING(GPIOI_PIN10) | \
- PIN_PUPDR_FLOATING(GPIOI_PIN11) | \
- PIN_PUPDR_FLOATING(GPIOI_PIN12) | \
- PIN_PUPDR_FLOATING(GPIOI_PIN13) | \
- PIN_PUPDR_FLOATING(GPIOI_PIN14) | \
- PIN_PUPDR_FLOATING(GPIOI_PIN15))
-#define VAL_GPIOI_ODR (PIN_ODR_HIGH(GPIOI_PIN0) | \
- PIN_ODR_HIGH(GPIOI_PIN1) | \
- PIN_ODR_HIGH(GPIOI_PIN2) | \
- PIN_ODR_HIGH(GPIOI_PIN3) | \
- PIN_ODR_HIGH(GPIOI_PIN4) | \
- PIN_ODR_HIGH(GPIOI_PIN5) | \
- PIN_ODR_HIGH(GPIOI_PIN6) | \
- PIN_ODR_HIGH(GPIOI_PIN7) | \
- PIN_ODR_HIGH(GPIOI_PIN8) | \
- PIN_ODR_HIGH(GPIOI_PIN9) | \
- PIN_ODR_HIGH(GPIOI_PIN10) | \
- PIN_ODR_HIGH(GPIOI_PIN11) | \
- PIN_ODR_HIGH(GPIOI_PIN12) | \
- PIN_ODR_HIGH(GPIOI_PIN13) | \
- PIN_ODR_HIGH(GPIOI_PIN14) | \
- PIN_ODR_HIGH(GPIOI_PIN15))
-#define VAL_GPIOI_AFRL (PIN_AFIO_AF(GPIOI_PIN0, 0) | \
- PIN_AFIO_AF(GPIOI_PIN1, 0) | \
- PIN_AFIO_AF(GPIOI_PIN2, 0) | \
- PIN_AFIO_AF(GPIOI_PIN3, 0) | \
- PIN_AFIO_AF(GPIOI_PIN4, 0) | \
- PIN_AFIO_AF(GPIOI_PIN5, 0) | \
- PIN_AFIO_AF(GPIOI_PIN6, 0) | \
- PIN_AFIO_AF(GPIOI_PIN7, 0))
-#define VAL_GPIOI_AFRH (PIN_AFIO_AF(GPIOI_PIN8, 0) | \
- PIN_AFIO_AF(GPIOI_PIN9, 0) | \
- PIN_AFIO_AF(GPIOI_PIN10, 0) | \
- PIN_AFIO_AF(GPIOI_PIN11, 0) | \
- PIN_AFIO_AF(GPIOI_PIN12, 0) | \
- PIN_AFIO_AF(GPIOI_PIN13, 0) | \
- PIN_AFIO_AF(GPIOI_PIN14, 0) | \
- PIN_AFIO_AF(GPIOI_PIN15, 0))
-
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
diff --git a/boards/ST_STM32F4_DISCOVERY/board.mk b/boards/ST_STM32F4_DISCOVERY/board.mk deleted file mode 100644 index eb47aa2af..000000000 --- a/boards/ST_STM32F4_DISCOVERY/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files.
-BOARDSRC = ${CHIBIOS}/boards/ST_STM32F4_DISCOVERY/board.c
-
-# Required include directories
-BOARDINC = ${CHIBIOS}/boards/ST_STM32F4_DISCOVERY
diff --git a/boards/ST_STM32F4_DISCOVERY/cfg/board.chcfg b/boards/ST_STM32F4_DISCOVERY/cfg/board.chcfg deleted file mode 100644 index e30de70e6..000000000 --- a/boards/ST_STM32F4_DISCOVERY/cfg/board.chcfg +++ /dev/null @@ -1,1186 +0,0 @@ -<?xml version="1.0" encoding="UTF-8"?>
-<!-- STM32F4xx board Template -->
-<board
- xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
- xsi:noNamespaceSchemaLocation="http://www.chibios.org/xml/schema/boards/stm32f4xx_board.xsd">
- <configuration_settings>
- <templates_path>resources/gencfg/processors/boards/stm32f4xx/templates</templates_path>
- <output_path>..</output_path>
- </configuration_settings>
- <board_name>STMicroelectronics STM32F4-Discovery</board_name>
- <board_id>ST_STM32F4_DISCOVERY</board_id>
- <board_functions></board_functions>
- <clocks HSEFrequency="8000000" HSEBypass="false" LSEFrequency="0" VDD="300" />
- <ports>
- <GPIOA>
- <pin0
- ID="BUTTON"
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin1
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin2
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin3
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin4
- ID="LRCK"
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Alternate"
- Alternate="6" />
- <pin5
- ID="SPC"
- Type="PushPull"
- Level="High"
- Speed="High"
- Resistor="Floating"
- Mode="Alternate"
- Alternate="5" />
- <pin6
- ID="SDO"
- Type="PushPull"
- Level="High"
- Speed="High"
- Resistor="Floating"
- Mode="Alternate"
- Alternate="5" />
- <pin7
- ID="SDI"
- Type="PushPull"
- Level="High"
- Speed="High"
- Resistor="Floating"
- Mode="Alternate"
- Alternate="5" />
- <pin8
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" ></pin8>
- <pin9
- ID="VBUS_FS"
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin10
- ID="OTG_FS_ID"
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Alternate"
- Alternate="10" />
- <pin11
- ID="OTG_FS_DM"
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Alternate"
- Alternate="10" />
- <pin12
- ID="OTG_FS_DP"
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Alternate"
- Alternate="10" />
- <pin13
- ID="SWDIO"
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Alternate"
- Alternate="0" />
- <pin14
- ID="SWCLK"
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Alternate"
- Alternate="0" />
- <pin15
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- </GPIOA>
- <GPIOB>
- <pin0
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin1
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin2
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin3
- ID="SWO"
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Alternate"
- Alternate="0" ></pin3>
- <pin4
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin5
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin6
- ID="SCL"
- Type="OpenDrain"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Alternate"
- Alternate="4" />
- <pin7
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin8
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin9
- ID="SDA"
- Type="OpenDrain"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Alternate"
- Alternate="4" ></pin9>
- <pin10
- ID="CLK_IN"
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin11
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin12
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin13
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin14
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin15
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- </GPIOB>
- <GPIOC>
- <pin0
- ID="OTG_FS_POWER_ON"
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Output"
- Alternate="0" />
- <pin1
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin2
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin3
- ID="PDM_OUT"
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" ></pin3>
- <pin4
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin5
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin6
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin7
- ID="MCLK"
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Alternate"
- Alternate="6" />
- <pin8
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin9
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin10
- ID="SCLK"
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Alternate"
- Alternate="6" />
- <pin11
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin12
- ID="SDIN"
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Alternate"
- Alternate="6" />
- <pin13
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin14
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin15
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- </GPIOC>
- <GPIOD>
- <pin0
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin1
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin2
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin3
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin4
- ID="RESET"
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Output"
- Alternate="0" />
- <pin5
- ID="OVER_CURRENT"
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" ></pin5>
- <pin6
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin7
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin8
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin9
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin10
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin11
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin12
- ID="LED4"
- Type="PushPull"
- Level="Low"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Output"
- Alternate="0" />
- <pin13
- ID="LED3"
- Type="PushPull"
- Level="Low"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Output"
- Alternate="0" />
- <pin14
- ID="LED5"
- Type="PushPull"
- Level="Low"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Output"
- Alternate="0" ></pin14>
- <pin15
- ID="LED6"
- Type="PushPull"
- Level="Low"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Output"
- Alternate="0" />
- </GPIOD>
- <GPIOE>
- <pin0
- ID="INT1"
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin1
- ID="INT2"
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin2
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin3
- ID="CS_SPI"
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Output"
- Alternate="0" />
- <pin4
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin5
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin6
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin7
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin8
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin9
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin10
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin11
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin12
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin13
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin14
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin15
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- </GPIOE>
- <GPIOF>
- <pin0
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin1
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin2
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin3
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin4
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin5
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin6
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin7
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin8
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin9
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin10
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin11
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin12
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin13
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin14
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin15
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- </GPIOF>
- <GPIOG>
- <pin0
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin1
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin2
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin3
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin4
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin5
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin6
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin7
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin8
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin9
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin10
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin11
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin12
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin13
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin14
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin15
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- </GPIOG>
- <GPIOH>
- <pin0
- ID="OSC_IN"
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin1
- ID="OSC_OUT"
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin2
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" ></pin2>
- <pin3
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin4
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin5
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin6
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin7
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin8
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin9
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin10
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin11
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin12
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin13
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin14
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin15
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- </GPIOH>
- <GPIOI>
- <pin0
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin1
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin2
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin3
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin4
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin5
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin6
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin7
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin8
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin9
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin10
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin11
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin12
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin13
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin14
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin15
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- </GPIOI>
- </ports>
-</board>
diff --git a/boards/ST_STM32L_DISCOVERY/board.c b/boards/ST_STM32L_DISCOVERY/board.c deleted file mode 100644 index 3d5ff42d9..000000000 --- a/boards/ST_STM32L_DISCOVERY/board.c +++ /dev/null @@ -1,102 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-/**
- * @brief PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- * This variable is used by the HAL when initializing the PAL driver.
- */
-const PALConfig pal_default_config =
-{
- {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
- VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH},
- {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
- VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH},
- {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
- VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH},
- {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
- VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH},
- {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
- VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH},
- {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
- VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH}
-};
-#endif
-
-/**
- * @brief Early initialization code.
- * @details This initialization must be performed just after stack setup
- * and before any other initialization.
- */
-void __early_init(void) {
-
- stm32_clock_init();
-}
-
-#if HAL_USE_SDC || defined(__DOXYGEN__)
-/**
- * @brief SDC card detection.
- */
-bool_t sdc_lld_is_card_inserted(SDCDriver *sdcp) {
-
- (void)sdcp;
- /* TODO: Fill the implementation.*/
- return TRUE;
-}
-
-/**
- * @brief SDC card write protection detection.
- */
-bool_t sdc_lld_is_write_protected(SDCDriver *sdcp) {
-
- (void)sdcp;
- /* TODO: Fill the implementation.*/
- return FALSE;
-}
-#endif /* HAL_USE_SDC */
-
-#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
-/**
- * @brief MMC_SPI card detection.
- */
-bool_t mmc_lld_is_card_inserted(MMCDriver *mmcp) {
-
- (void)mmcp;
- /* TODO: Fill the implementation.*/
- return TRUE;
-}
-
-/**
- * @brief MMC_SPI card write protection detection.
- */
-bool_t mmc_lld_is_write_protected(MMCDriver *mmcp) {
-
- (void)mmcp;
- /* TODO: Fill the implementation.*/
- return FALSE;
-}
-#endif
-
-/**
- * @brief Board-specific initialization code.
- * @todo Add your board-specific code, if any.
- */
-void boardInit(void) {
-}
diff --git a/boards/ST_STM32L_DISCOVERY/board.h b/boards/ST_STM32L_DISCOVERY/board.h deleted file mode 100644 index efbd86dae..000000000 --- a/boards/ST_STM32L_DISCOVERY/board.h +++ /dev/null @@ -1,890 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for ST STM32L-Discovery board.
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_ST_STM32L_DISCOVERY
-#define BOARD_NAME "ST STM32L-Discovery"
-
-
-/*
- * Board oscillators-related settings.
- * NOTE: HSE not fitted.
- */
-#if !defined(STM32_LSECLK)
-#define STM32_LSECLK 32768
-#endif
-
-#if !defined(STM32_HSECLK)
-#define STM32_HSECLK 0
-#endif
-
-#define STM32_HSE_BYPASS
-
-/*
- * MCU type as defined in the ST header file stm32l1xx.h.
- */
-#define STM32L1XX_MD
-
-/*
- * IO pins assignments.
- */
-#define GPIOA_BUTTON 0
-#define GPIOA_PIN1 1
-#define GPIOA_PIN2 2
-#define GPIOA_PIN3 3
-#define GPIOA_PIN4 4
-#define GPIOA_PIN5 5
-#define GPIOA_PIN6 6
-#define GPIOA_PIN7 7
-#define GPIOA_PIN8 8
-#define GPIOA_PIN9 9
-#define GPIOA_PIN10 10
-#define GPIOA_PIN11 11
-#define GPIOA_PIN12 12
-#define GPIOA_JTAG_TMS 13
-#define GPIOA_JTAG_TCK 14
-#define GPIOA_JTAG_TDI 15
-
-#define GPIOB_PIN0 0
-#define GPIOB_PIN1 1
-#define GPIOB_BOOT1 2
-#define GPIOB_JTAG_TDO 3
-#define GPIOB_JTAG_TRST 4
-#define GPIOB_PIN5 5
-#define GPIOB_LED4 6
-#define GPIOB_LED3 7
-#define GPIOB_PIN8 8
-#define GPIOB_PIN9 9
-#define GPIOB_PIN10 10
-#define GPIOB_PIN11 11
-#define GPIOB_PIN12 12
-#define GPIOB_PIN13 13
-#define GPIOB_PIN14 14
-#define GPIOB_PIN15 15
-
-#define GPIOC_PIN0 0
-#define GPIOC_PIN1 1
-#define GPIOC_PIN2 2
-#define GPIOC_PIN3 3
-#define GPIOC_PIN4 4
-#define GPIOC_PIN5 5
-#define GPIOC_PIN6 6
-#define GPIOC_PIN7 7
-#define GPIOC_PIN8 8
-#define GPIOC_PIN9 9
-#define GPIOC_PIN10 10
-#define GPIOC_PIN11 11
-#define GPIOC_PIN12 12
-#define GPIOC_PIN13 13
-#define GPIOC_OSC32_IN 14
-#define GPIOC_OSC32_OUT 15
-
-#define GPIOD_PIN0 0
-#define GPIOD_PIN1 1
-#define GPIOD_PIN2 2
-#define GPIOD_PIN3 3
-#define GPIOD_PIN4 4
-#define GPIOD_PIN5 5
-#define GPIOD_PIN6 6
-#define GPIOD_PIN7 7
-#define GPIOD_PIN8 8
-#define GPIOD_PIN9 9
-#define GPIOD_PIN10 10
-#define GPIOD_PIN11 11
-#define GPIOD_PIN12 12
-#define GPIOD_PIN13 13
-#define GPIOD_PIN14 14
-#define GPIOD_PIN15 15
-
-#define GPIOE_PIN0 0
-#define GPIOE_PIN1 1
-#define GPIOE_PIN2 2
-#define GPIOE_PIN3 3
-#define GPIOE_PIN4 4
-#define GPIOE_PIN5 5
-#define GPIOE_PIN6 6
-#define GPIOE_PIN7 7
-#define GPIOE_PIN8 8
-#define GPIOE_PIN9 9
-#define GPIOE_PIN10 10
-#define GPIOE_PIN11 11
-#define GPIOE_PIN12 12
-#define GPIOE_PIN13 13
-#define GPIOE_PIN14 14
-#define GPIOE_PIN15 15
-
-#define GPIOH_OSC_IN 0
-#define GPIOH_OSC_OUT 1
-#define GPIOH_PIN2 2
-#define GPIOH_PIN3 3
-#define GPIOH_PIN4 4
-#define GPIOH_PIN5 5
-#define GPIOH_PIN6 6
-#define GPIOH_PIN7 7
-#define GPIOH_PIN8 8
-#define GPIOH_PIN9 9
-#define GPIOH_PIN10 10
-#define GPIOH_PIN11 11
-#define GPIOH_PIN12 12
-#define GPIOH_PIN13 13
-#define GPIOH_PIN14 14
-#define GPIOH_PIN15 15
-
-/*
- * I/O ports initial setup, this configuration is established soon after reset
- * in the initialization code.
- * Please refer to the STM32 Reference Manual for details.
- */
-#define PIN_MODE_INPUT(n) (0U << ((n) * 2))
-#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2))
-#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2))
-#define PIN_MODE_ANALOG(n) (3U << ((n) * 2))
-#define PIN_ODR_LOW(n) (0U << (n))
-#define PIN_ODR_HIGH(n) (1U << (n))
-#define PIN_OTYPE_PUSHPULL(n) (0U << (n))
-#define PIN_OTYPE_OPENDRAIN(n) (1U << (n))
-#define PIN_OSPEED_400K(n) (0U << ((n) * 2))
-#define PIN_OSPEED_2M(n) (1U << ((n) * 2))
-#define PIN_OSPEED_10M(n) (2U << ((n) * 2))
-#define PIN_OSPEED_40M(n) (3U << ((n) * 2))
-#define PIN_PUPDR_FLOATING(n) (0U << ((n) * 2))
-#define PIN_PUPDR_PULLUP(n) (1U << ((n) * 2))
-#define PIN_PUPDR_PULLDOWN(n) (2U << ((n) * 2))
-#define PIN_AFIO_AF(n, v) ((v##U) << ((n % 8) * 4))
-
-/*
- * GPIOA setup:
- *
- * PA0 - BUTTON (input floating).
- * PA1 - PIN1 (input pullup).
- * PA2 - PIN2 (input pullup).
- * PA3 - PIN3 (input pullup).
- * PA4 - PIN4 (input pullup).
- * PA5 - PIN5 (input pullup).
- * PA6 - PIN6 (input pullup).
- * PA7 - PIN7 (input pullup).
- * PA8 - PIN8 (input pullup).
- * PA9 - PIN9 (input pullup).
- * PA10 - PIN10 (input pullup).
- * PA11 - PIN11 (input pullup).
- * PA12 - PIN12 (input pullup).
- * PA13 - JTAG_TMS (alternate 0).
- * PA14 - JTAG_TCK (alternate 0).
- * PA15 - JTAG_TDI (alternate 0).
- */
-#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_BUTTON) | \
- PIN_MODE_INPUT(GPIOA_PIN1) | \
- PIN_MODE_INPUT(GPIOA_PIN2) | \
- PIN_MODE_INPUT(GPIOA_PIN3) | \
- PIN_MODE_INPUT(GPIOA_PIN4) | \
- PIN_MODE_INPUT(GPIOA_PIN5) | \
- PIN_MODE_INPUT(GPIOA_PIN6) | \
- PIN_MODE_INPUT(GPIOA_PIN7) | \
- PIN_MODE_INPUT(GPIOA_PIN8) | \
- PIN_MODE_INPUT(GPIOA_PIN9) | \
- PIN_MODE_INPUT(GPIOA_PIN10) | \
- PIN_MODE_INPUT(GPIOA_PIN11) | \
- PIN_MODE_INPUT(GPIOA_PIN12) | \
- PIN_MODE_ALTERNATE(GPIOA_JTAG_TMS) | \
- PIN_MODE_ALTERNATE(GPIOA_JTAG_TCK) | \
- PIN_MODE_ALTERNATE(GPIOA_JTAG_TDI))
-#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN4) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN5) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN6) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN7) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN9) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN10) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN11) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN12) | \
- PIN_OTYPE_PUSHPULL(GPIOA_JTAG_TMS) | \
- PIN_OTYPE_PUSHPULL(GPIOA_JTAG_TCK) | \
- PIN_OTYPE_PUSHPULL(GPIOA_JTAG_TDI))
-#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_400K(GPIOA_BUTTON) | \
- PIN_OSPEED_400K(GPIOA_PIN1) | \
- PIN_OSPEED_400K(GPIOA_PIN2) | \
- PIN_OSPEED_400K(GPIOA_PIN3) | \
- PIN_OSPEED_400K(GPIOA_PIN4) | \
- PIN_OSPEED_400K(GPIOA_PIN5) | \
- PIN_OSPEED_400K(GPIOA_PIN6) | \
- PIN_OSPEED_400K(GPIOA_PIN7) | \
- PIN_OSPEED_400K(GPIOA_PIN8) | \
- PIN_OSPEED_400K(GPIOA_PIN9) | \
- PIN_OSPEED_400K(GPIOA_PIN10) | \
- PIN_OSPEED_400K(GPIOA_PIN11) | \
- PIN_OSPEED_400K(GPIOA_PIN12) | \
- PIN_OSPEED_40M(GPIOA_JTAG_TMS) | \
- PIN_OSPEED_40M(GPIOA_JTAG_TCK) | \
- PIN_OSPEED_40M(GPIOA_JTAG_TDI))
-#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_BUTTON) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN1) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN2) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN3) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN4) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN5) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN6) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN7) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN8) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN9) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN10) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN11) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN12) | \
- PIN_PUPDR_PULLUP(GPIOA_JTAG_TMS) | \
- PIN_PUPDR_PULLDOWN(GPIOA_JTAG_TCK) | \
- PIN_PUPDR_PULLUP(GPIOA_JTAG_TDI))
-#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_BUTTON) | \
- PIN_ODR_HIGH(GPIOA_PIN1) | \
- PIN_ODR_HIGH(GPIOA_PIN2) | \
- PIN_ODR_HIGH(GPIOA_PIN3) | \
- PIN_ODR_HIGH(GPIOA_PIN4) | \
- PIN_ODR_HIGH(GPIOA_PIN5) | \
- PIN_ODR_HIGH(GPIOA_PIN6) | \
- PIN_ODR_HIGH(GPIOA_PIN7) | \
- PIN_ODR_HIGH(GPIOA_PIN8) | \
- PIN_ODR_HIGH(GPIOA_PIN9) | \
- PIN_ODR_HIGH(GPIOA_PIN10) | \
- PIN_ODR_HIGH(GPIOA_PIN11) | \
- PIN_ODR_HIGH(GPIOA_PIN12) | \
- PIN_ODR_HIGH(GPIOA_JTAG_TMS) | \
- PIN_ODR_HIGH(GPIOA_JTAG_TCK) | \
- PIN_ODR_HIGH(GPIOA_JTAG_TDI))
-#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_BUTTON, 0) | \
- PIN_AFIO_AF(GPIOA_PIN1, 0) | \
- PIN_AFIO_AF(GPIOA_PIN2, 0) | \
- PIN_AFIO_AF(GPIOA_PIN3, 0) | \
- PIN_AFIO_AF(GPIOA_PIN4, 0) | \
- PIN_AFIO_AF(GPIOA_PIN5, 0) | \
- PIN_AFIO_AF(GPIOA_PIN6, 0) | \
- PIN_AFIO_AF(GPIOA_PIN7, 0))
-#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0) | \
- PIN_AFIO_AF(GPIOA_PIN9, 0) | \
- PIN_AFIO_AF(GPIOA_PIN10, 0) | \
- PIN_AFIO_AF(GPIOA_PIN11, 0) | \
- PIN_AFIO_AF(GPIOA_PIN12, 0) | \
- PIN_AFIO_AF(GPIOA_JTAG_TMS, 0) | \
- PIN_AFIO_AF(GPIOA_JTAG_TCK, 0) | \
- PIN_AFIO_AF(GPIOA_JTAG_TDI, 0))
-
-/*
- * GPIOB setup:
- *
- * PB0 - PIN0 (input pullup).
- * PB1 - PIN1 (input pullup).
- * PB2 - BOOT1 (input floating).
- * PB3 - JTAG_TDO (alternate 0).
- * PB4 - JTAG_TRST (alternate 0).
- * PB5 - PIN5 (input pullup).
- * PB6 - LED4 (output pushpull maximum).
- * PB7 - LED3 (output pushpull maximum).
- * PB8 - PIN8 (input pullup).
- * PB9 - PIN9 (input pullup).
- * PB10 - PIN10 (input pullup).
- * PB11 - PIN11 (input pullup).
- * PB12 - PIN12 (input pullup).
- * PB13 - PIN13 (input pullup).
- * PB14 - PIN14 (input pullup).
- * PB15 - PIN15 (input pullup).
- */
-#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | \
- PIN_MODE_INPUT(GPIOB_PIN1) | \
- PIN_MODE_INPUT(GPIOB_BOOT1) | \
- PIN_MODE_ALTERNATE(GPIOB_JTAG_TDO) | \
- PIN_MODE_ALTERNATE(GPIOB_JTAG_TRST) | \
- PIN_MODE_INPUT(GPIOB_PIN5) | \
- PIN_MODE_OUTPUT(GPIOB_LED4) | \
- PIN_MODE_OUTPUT(GPIOB_LED3) | \
- PIN_MODE_INPUT(GPIOB_PIN8) | \
- PIN_MODE_INPUT(GPIOB_PIN9) | \
- PIN_MODE_INPUT(GPIOB_PIN10) | \
- PIN_MODE_INPUT(GPIOB_PIN11) | \
- PIN_MODE_INPUT(GPIOB_PIN12) | \
- PIN_MODE_INPUT(GPIOB_PIN13) | \
- PIN_MODE_INPUT(GPIOB_PIN14) | \
- PIN_MODE_INPUT(GPIOB_PIN15))
-#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | \
- PIN_OTYPE_PUSHPULL(GPIOB_BOOT1) | \
- PIN_OTYPE_PUSHPULL(GPIOB_JTAG_TDO) | \
- PIN_OTYPE_PUSHPULL(GPIOB_JTAG_TRST) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | \
- PIN_OTYPE_PUSHPULL(GPIOB_LED4) | \
- PIN_OTYPE_PUSHPULL(GPIOB_LED3) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN9) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN10) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN13) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN14) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN15))
-#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_400K(GPIOB_PIN0) | \
- PIN_OSPEED_400K(GPIOB_PIN1) | \
- PIN_OSPEED_40M(GPIOB_BOOT1) | \
- PIN_OSPEED_40M(GPIOB_JTAG_TDO) | \
- PIN_OSPEED_40M(GPIOB_JTAG_TRST) | \
- PIN_OSPEED_400K(GPIOB_PIN5) | \
- PIN_OSPEED_40M(GPIOB_LED4) | \
- PIN_OSPEED_40M(GPIOB_LED3) | \
- PIN_OSPEED_400K(GPIOB_PIN8) | \
- PIN_OSPEED_400K(GPIOB_PIN9) | \
- PIN_OSPEED_400K(GPIOB_PIN10) | \
- PIN_OSPEED_400K(GPIOB_PIN11) | \
- PIN_OSPEED_400K(GPIOB_PIN12) | \
- PIN_OSPEED_400K(GPIOB_PIN13) | \
- PIN_OSPEED_400K(GPIOB_PIN14) | \
- PIN_OSPEED_400K(GPIOB_PIN15))
-#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN1) | \
- PIN_PUPDR_FLOATING(GPIOB_BOOT1) | \
- PIN_PUPDR_FLOATING(GPIOB_JTAG_TDO) | \
- PIN_PUPDR_PULLUP(GPIOB_JTAG_TRST) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN5) | \
- PIN_PUPDR_FLOATING(GPIOB_LED4) | \
- PIN_PUPDR_FLOATING(GPIOB_LED3) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN8) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN9) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN10) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN11) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN12) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN13) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN14) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN15))
-#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | \
- PIN_ODR_HIGH(GPIOB_PIN1) | \
- PIN_ODR_HIGH(GPIOB_BOOT1) | \
- PIN_ODR_HIGH(GPIOB_JTAG_TDO) | \
- PIN_ODR_HIGH(GPIOB_JTAG_TRST) | \
- PIN_ODR_HIGH(GPIOB_PIN5) | \
- PIN_ODR_LOW(GPIOB_LED4) | \
- PIN_ODR_LOW(GPIOB_LED3) | \
- PIN_ODR_HIGH(GPIOB_PIN8) | \
- PIN_ODR_HIGH(GPIOB_PIN9) | \
- PIN_ODR_HIGH(GPIOB_PIN10) | \
- PIN_ODR_HIGH(GPIOB_PIN11) | \
- PIN_ODR_HIGH(GPIOB_PIN12) | \
- PIN_ODR_HIGH(GPIOB_PIN13) | \
- PIN_ODR_HIGH(GPIOB_PIN14) | \
- PIN_ODR_HIGH(GPIOB_PIN15))
-#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0) | \
- PIN_AFIO_AF(GPIOB_PIN1, 0) | \
- PIN_AFIO_AF(GPIOB_BOOT1, 0) | \
- PIN_AFIO_AF(GPIOB_JTAG_TDO, 0) | \
- PIN_AFIO_AF(GPIOB_JTAG_TRST, 0) | \
- PIN_AFIO_AF(GPIOB_PIN5, 0) | \
- PIN_AFIO_AF(GPIOB_LED4, 0) | \
- PIN_AFIO_AF(GPIOB_LED3, 0))
-#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0) | \
- PIN_AFIO_AF(GPIOB_PIN9, 0) | \
- PIN_AFIO_AF(GPIOB_PIN10, 0) | \
- PIN_AFIO_AF(GPIOB_PIN11, 0) | \
- PIN_AFIO_AF(GPIOB_PIN12, 0) | \
- PIN_AFIO_AF(GPIOB_PIN13, 0) | \
- PIN_AFIO_AF(GPIOB_PIN14, 0) | \
- PIN_AFIO_AF(GPIOB_PIN15, 0))
-
-/*
- * GPIOC setup:
- *
- * PC0 - PIN0 (input pullup).
- * PC1 - PIN1 (input pullup).
- * PC2 - PIN2 (input pullup).
- * PC3 - PIN3 (input pullup).
- * PC4 - PIN4 (input pullup).
- * PC5 - PIN5 (input pullup).
- * PC6 - PIN6 (input pullup).
- * PC7 - PIN7 (input pullup).
- * PC8 - PIN8 (input pullup).
- * PC9 - PIN9 (input pullup).
- * PC10 - PIN10 (input pullup).
- * PC11 - PIN11 (input pullup).
- * PC12 - PIN12 (input pullup).
- * PC13 - PIN13 (input pullup).
- * PC14 - OSC32_IN (input floating).
- * PC15 - OSC32_OUT (input floating).
- */
-#define VAL_GPIOC_MODER (PIN_MODE_INPUT(GPIOC_PIN0) | \
- PIN_MODE_INPUT(GPIOC_PIN1) | \
- PIN_MODE_INPUT(GPIOC_PIN2) | \
- PIN_MODE_INPUT(GPIOC_PIN3) | \
- PIN_MODE_INPUT(GPIOC_PIN4) | \
- PIN_MODE_INPUT(GPIOC_PIN5) | \
- PIN_MODE_INPUT(GPIOC_PIN6) | \
- PIN_MODE_INPUT(GPIOC_PIN7) | \
- PIN_MODE_INPUT(GPIOC_PIN8) | \
- PIN_MODE_INPUT(GPIOC_PIN9) | \
- PIN_MODE_INPUT(GPIOC_PIN10) | \
- PIN_MODE_INPUT(GPIOC_PIN11) | \
- PIN_MODE_INPUT(GPIOC_PIN12) | \
- PIN_MODE_INPUT(GPIOC_PIN13) | \
- PIN_MODE_INPUT(GPIOC_OSC32_IN) | \
- PIN_MODE_INPUT(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_PIN0) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN3) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN6) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN7) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN8) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN9) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN10) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | \
- PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) | \
- PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_400K(GPIOC_PIN0) | \
- PIN_OSPEED_400K(GPIOC_PIN1) | \
- PIN_OSPEED_400K(GPIOC_PIN2) | \
- PIN_OSPEED_400K(GPIOC_PIN3) | \
- PIN_OSPEED_400K(GPIOC_PIN4) | \
- PIN_OSPEED_400K(GPIOC_PIN5) | \
- PIN_OSPEED_400K(GPIOC_PIN6) | \
- PIN_OSPEED_400K(GPIOC_PIN7) | \
- PIN_OSPEED_400K(GPIOC_PIN8) | \
- PIN_OSPEED_400K(GPIOC_PIN9) | \
- PIN_OSPEED_400K(GPIOC_PIN10) | \
- PIN_OSPEED_400K(GPIOC_PIN11) | \
- PIN_OSPEED_400K(GPIOC_PIN12) | \
- PIN_OSPEED_400K(GPIOC_PIN13) | \
- PIN_OSPEED_40M(GPIOC_OSC32_IN) | \
- PIN_OSPEED_40M(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_PUPDR (PIN_PUPDR_PULLUP(GPIOC_PIN0) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN1) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN2) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN3) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN4) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN5) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN6) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN7) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN8) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN9) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN10) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN11) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN12) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN13) | \
- PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) | \
- PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_PIN0) | \
- PIN_ODR_HIGH(GPIOC_PIN1) | \
- PIN_ODR_HIGH(GPIOC_PIN2) | \
- PIN_ODR_HIGH(GPIOC_PIN3) | \
- PIN_ODR_HIGH(GPIOC_PIN4) | \
- PIN_ODR_HIGH(GPIOC_PIN5) | \
- PIN_ODR_HIGH(GPIOC_PIN6) | \
- PIN_ODR_HIGH(GPIOC_PIN7) | \
- PIN_ODR_HIGH(GPIOC_PIN8) | \
- PIN_ODR_HIGH(GPIOC_PIN9) | \
- PIN_ODR_HIGH(GPIOC_PIN10) | \
- PIN_ODR_HIGH(GPIOC_PIN11) | \
- PIN_ODR_HIGH(GPIOC_PIN12) | \
- PIN_ODR_HIGH(GPIOC_PIN13) | \
- PIN_ODR_HIGH(GPIOC_OSC32_IN) | \
- PIN_ODR_HIGH(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_PIN0, 0) | \
- PIN_AFIO_AF(GPIOC_PIN1, 0) | \
- PIN_AFIO_AF(GPIOC_PIN2, 0) | \
- PIN_AFIO_AF(GPIOC_PIN3, 0) | \
- PIN_AFIO_AF(GPIOC_PIN4, 0) | \
- PIN_AFIO_AF(GPIOC_PIN5, 0) | \
- PIN_AFIO_AF(GPIOC_PIN6, 0) | \
- PIN_AFIO_AF(GPIOC_PIN7, 0))
-#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_PIN8, 0) | \
- PIN_AFIO_AF(GPIOC_PIN9, 0) | \
- PIN_AFIO_AF(GPIOC_PIN10, 0) | \
- PIN_AFIO_AF(GPIOC_PIN11, 0) | \
- PIN_AFIO_AF(GPIOC_PIN12, 0) | \
- PIN_AFIO_AF(GPIOC_PIN13, 0) | \
- PIN_AFIO_AF(GPIOC_OSC32_IN, 0) | \
- PIN_AFIO_AF(GPIOC_OSC32_OUT, 0))
-
-/*
- * GPIOD setup:
- *
- * PD0 - PIN0 (input pullup).
- * PD1 - PIN1 (input pullup).
- * PD2 - PIN2 (input pullup).
- * PD3 - PIN3 (input pullup).
- * PD4 - PIN4 (input pullup).
- * PD5 - PIN5 (input pullup).
- * PD6 - PIN6 (input pullup).
- * PD7 - PIN7 (input pullup).
- * PD8 - PIN8 (input pullup).
- * PD9 - PIN9 (input pullup).
- * PD10 - PIN10 (input pullup).
- * PD11 - PIN11 (input pullup).
- * PD12 - PIN12 (input pullup).
- * PD13 - PIN13 (input pullup).
- * PD14 - PIN14 (input pullup).
- * PD15 - PIN15 (input pullup).
- */
-#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | \
- PIN_MODE_INPUT(GPIOD_PIN1) | \
- PIN_MODE_INPUT(GPIOD_PIN2) | \
- PIN_MODE_INPUT(GPIOD_PIN3) | \
- PIN_MODE_INPUT(GPIOD_PIN4) | \
- PIN_MODE_INPUT(GPIOD_PIN5) | \
- PIN_MODE_INPUT(GPIOD_PIN6) | \
- PIN_MODE_INPUT(GPIOD_PIN7) | \
- PIN_MODE_INPUT(GPIOD_PIN8) | \
- PIN_MODE_INPUT(GPIOD_PIN9) | \
- PIN_MODE_INPUT(GPIOD_PIN10) | \
- PIN_MODE_INPUT(GPIOD_PIN11) | \
- PIN_MODE_INPUT(GPIOD_PIN12) | \
- PIN_MODE_INPUT(GPIOD_PIN13) | \
- PIN_MODE_INPUT(GPIOD_PIN14) | \
- PIN_MODE_INPUT(GPIOD_PIN15))
-#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN4) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN5) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN15))
-#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_400K(GPIOD_PIN0) | \
- PIN_OSPEED_400K(GPIOD_PIN1) | \
- PIN_OSPEED_400K(GPIOD_PIN2) | \
- PIN_OSPEED_400K(GPIOD_PIN3) | \
- PIN_OSPEED_400K(GPIOD_PIN4) | \
- PIN_OSPEED_400K(GPIOD_PIN5) | \
- PIN_OSPEED_400K(GPIOD_PIN6) | \
- PIN_OSPEED_400K(GPIOD_PIN7) | \
- PIN_OSPEED_400K(GPIOD_PIN8) | \
- PIN_OSPEED_400K(GPIOD_PIN9) | \
- PIN_OSPEED_400K(GPIOD_PIN10) | \
- PIN_OSPEED_400K(GPIOD_PIN11) | \
- PIN_OSPEED_400K(GPIOD_PIN12) | \
- PIN_OSPEED_400K(GPIOD_PIN13) | \
- PIN_OSPEED_400K(GPIOD_PIN14) | \
- PIN_OSPEED_400K(GPIOD_PIN15))
-#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN1) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN2) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN3) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN4) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN5) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN6) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN7) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN8) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN9) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN10) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN11) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN12) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN13) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN14) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN15))
-#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | \
- PIN_ODR_HIGH(GPIOD_PIN1) | \
- PIN_ODR_HIGH(GPIOD_PIN2) | \
- PIN_ODR_HIGH(GPIOD_PIN3) | \
- PIN_ODR_HIGH(GPIOD_PIN4) | \
- PIN_ODR_HIGH(GPIOD_PIN5) | \
- PIN_ODR_HIGH(GPIOD_PIN6) | \
- PIN_ODR_HIGH(GPIOD_PIN7) | \
- PIN_ODR_HIGH(GPIOD_PIN8) | \
- PIN_ODR_HIGH(GPIOD_PIN9) | \
- PIN_ODR_HIGH(GPIOD_PIN10) | \
- PIN_ODR_HIGH(GPIOD_PIN11) | \
- PIN_ODR_HIGH(GPIOD_PIN12) | \
- PIN_ODR_HIGH(GPIOD_PIN13) | \
- PIN_ODR_HIGH(GPIOD_PIN14) | \
- PIN_ODR_HIGH(GPIOD_PIN15))
-#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0) | \
- PIN_AFIO_AF(GPIOD_PIN1, 0) | \
- PIN_AFIO_AF(GPIOD_PIN2, 0) | \
- PIN_AFIO_AF(GPIOD_PIN3, 0) | \
- PIN_AFIO_AF(GPIOD_PIN4, 0) | \
- PIN_AFIO_AF(GPIOD_PIN5, 0) | \
- PIN_AFIO_AF(GPIOD_PIN6, 0) | \
- PIN_AFIO_AF(GPIOD_PIN7, 0))
-#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0) | \
- PIN_AFIO_AF(GPIOD_PIN9, 0) | \
- PIN_AFIO_AF(GPIOD_PIN10, 0) | \
- PIN_AFIO_AF(GPIOD_PIN11, 0) | \
- PIN_AFIO_AF(GPIOD_PIN12, 0) | \
- PIN_AFIO_AF(GPIOD_PIN13, 0) | \
- PIN_AFIO_AF(GPIOD_PIN14, 0) | \
- PIN_AFIO_AF(GPIOD_PIN15, 0))
-
-/*
- * GPIOE setup:
- *
- * PE0 - PIN0 (input pullup).
- * PE1 - PIN1 (input pullup).
- * PE2 - PIN2 (input pullup).
- * PE3 - PIN3 (input pullup).
- * PE4 - PIN4 (input pullup).
- * PE5 - PIN5 (input pullup).
- * PE6 - PIN6 (input pullup).
- * PE7 - PIN7 (input pullup).
- * PE8 - PIN8 (input pullup).
- * PE9 - PIN9 (input pullup).
- * PE10 - PIN10 (input pullup).
- * PE11 - PIN11 (input pullup).
- * PE12 - PIN12 (input pullup).
- * PE13 - PIN13 (input pullup).
- * PE14 - PIN14 (input pullup).
- * PE15 - PIN15 (input pullup).
- */
-#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_PIN0) | \
- PIN_MODE_INPUT(GPIOE_PIN1) | \
- PIN_MODE_INPUT(GPIOE_PIN2) | \
- PIN_MODE_INPUT(GPIOE_PIN3) | \
- PIN_MODE_INPUT(GPIOE_PIN4) | \
- PIN_MODE_INPUT(GPIOE_PIN5) | \
- PIN_MODE_INPUT(GPIOE_PIN6) | \
- PIN_MODE_INPUT(GPIOE_PIN7) | \
- PIN_MODE_INPUT(GPIOE_PIN8) | \
- PIN_MODE_INPUT(GPIOE_PIN9) | \
- PIN_MODE_INPUT(GPIOE_PIN10) | \
- PIN_MODE_INPUT(GPIOE_PIN11) | \
- PIN_MODE_INPUT(GPIOE_PIN12) | \
- PIN_MODE_INPUT(GPIOE_PIN13) | \
- PIN_MODE_INPUT(GPIOE_PIN14) | \
- PIN_MODE_INPUT(GPIOE_PIN15))
-#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN1) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN2) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN3) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN4) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN5) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN10) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN14) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN15))
-#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_400K(GPIOE_PIN0) | \
- PIN_OSPEED_400K(GPIOE_PIN1) | \
- PIN_OSPEED_400K(GPIOE_PIN2) | \
- PIN_OSPEED_400K(GPIOE_PIN3) | \
- PIN_OSPEED_400K(GPIOE_PIN4) | \
- PIN_OSPEED_400K(GPIOE_PIN5) | \
- PIN_OSPEED_400K(GPIOE_PIN6) | \
- PIN_OSPEED_400K(GPIOE_PIN7) | \
- PIN_OSPEED_400K(GPIOE_PIN8) | \
- PIN_OSPEED_400K(GPIOE_PIN9) | \
- PIN_OSPEED_400K(GPIOE_PIN10) | \
- PIN_OSPEED_400K(GPIOE_PIN11) | \
- PIN_OSPEED_400K(GPIOE_PIN12) | \
- PIN_OSPEED_400K(GPIOE_PIN13) | \
- PIN_OSPEED_400K(GPIOE_PIN14) | \
- PIN_OSPEED_400K(GPIOE_PIN15))
-#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_PIN0) | \
- PIN_PUPDR_PULLUP(GPIOE_PIN1) | \
- PIN_PUPDR_PULLUP(GPIOE_PIN2) | \
- PIN_PUPDR_PULLUP(GPIOE_PIN3) | \
- PIN_PUPDR_PULLUP(GPIOE_PIN4) | \
- PIN_PUPDR_PULLUP(GPIOE_PIN5) | \
- PIN_PUPDR_PULLUP(GPIOE_PIN6) | \
- PIN_PUPDR_PULLUP(GPIOE_PIN7) | \
- PIN_PUPDR_PULLUP(GPIOE_PIN8) | \
- PIN_PUPDR_PULLUP(GPIOE_PIN9) | \
- PIN_PUPDR_PULLUP(GPIOE_PIN10) | \
- PIN_PUPDR_PULLUP(GPIOE_PIN11) | \
- PIN_PUPDR_PULLUP(GPIOE_PIN12) | \
- PIN_PUPDR_PULLUP(GPIOE_PIN13) | \
- PIN_PUPDR_PULLUP(GPIOE_PIN14) | \
- PIN_PUPDR_PULLUP(GPIOE_PIN15))
-#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_PIN0) | \
- PIN_ODR_HIGH(GPIOE_PIN1) | \
- PIN_ODR_HIGH(GPIOE_PIN2) | \
- PIN_ODR_HIGH(GPIOE_PIN3) | \
- PIN_ODR_HIGH(GPIOE_PIN4) | \
- PIN_ODR_HIGH(GPIOE_PIN5) | \
- PIN_ODR_HIGH(GPIOE_PIN6) | \
- PIN_ODR_HIGH(GPIOE_PIN7) | \
- PIN_ODR_HIGH(GPIOE_PIN8) | \
- PIN_ODR_HIGH(GPIOE_PIN9) | \
- PIN_ODR_HIGH(GPIOE_PIN10) | \
- PIN_ODR_HIGH(GPIOE_PIN11) | \
- PIN_ODR_HIGH(GPIOE_PIN12) | \
- PIN_ODR_HIGH(GPIOE_PIN13) | \
- PIN_ODR_HIGH(GPIOE_PIN14) | \
- PIN_ODR_HIGH(GPIOE_PIN15))
-#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_PIN0, 0) | \
- PIN_AFIO_AF(GPIOE_PIN1, 0) | \
- PIN_AFIO_AF(GPIOE_PIN2, 0) | \
- PIN_AFIO_AF(GPIOE_PIN3, 0) | \
- PIN_AFIO_AF(GPIOE_PIN4, 0) | \
- PIN_AFIO_AF(GPIOE_PIN5, 0) | \
- PIN_AFIO_AF(GPIOE_PIN6, 0) | \
- PIN_AFIO_AF(GPIOE_PIN7, 0))
-#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0) | \
- PIN_AFIO_AF(GPIOE_PIN9, 0) | \
- PIN_AFIO_AF(GPIOE_PIN10, 0) | \
- PIN_AFIO_AF(GPIOE_PIN11, 0) | \
- PIN_AFIO_AF(GPIOE_PIN12, 0) | \
- PIN_AFIO_AF(GPIOE_PIN13, 0) | \
- PIN_AFIO_AF(GPIOE_PIN14, 0) | \
- PIN_AFIO_AF(GPIOE_PIN15, 0))
-
-/*
- * GPIOH setup:
- *
- * PH0 - OSC_IN (input floating).
- * PH1 - OSC_OUT (input floating).
- * PH2 - PIN2 (input pullup).
- * PH3 - PIN3 (input pullup).
- * PH4 - PIN4 (input pullup).
- * PH5 - PIN5 (input pullup).
- * PH6 - PIN6 (input pullup).
- * PH7 - PIN7 (input pullup).
- * PH8 - PIN8 (input pullup).
- * PH9 - PIN9 (input pullup).
- * PH10 - PIN10 (input pullup).
- * PH11 - PIN11 (input pullup).
- * PH12 - PIN12 (input pullup).
- * PH13 - PIN13 (input pullup).
- * PH14 - PIN14 (input pullup).
- * PH15 - PIN15 (input pullup).
- */
-#define VAL_GPIOH_MODER (PIN_MODE_INPUT(GPIOH_OSC_IN) | \
- PIN_MODE_INPUT(GPIOH_OSC_OUT) | \
- PIN_MODE_INPUT(GPIOH_PIN2) | \
- PIN_MODE_INPUT(GPIOH_PIN3) | \
- PIN_MODE_INPUT(GPIOH_PIN4) | \
- PIN_MODE_INPUT(GPIOH_PIN5) | \
- PIN_MODE_INPUT(GPIOH_PIN6) | \
- PIN_MODE_INPUT(GPIOH_PIN7) | \
- PIN_MODE_INPUT(GPIOH_PIN8) | \
- PIN_MODE_INPUT(GPIOH_PIN9) | \
- PIN_MODE_INPUT(GPIOH_PIN10) | \
- PIN_MODE_INPUT(GPIOH_PIN11) | \
- PIN_MODE_INPUT(GPIOH_PIN12) | \
- PIN_MODE_INPUT(GPIOH_PIN13) | \
- PIN_MODE_INPUT(GPIOH_PIN14) | \
- PIN_MODE_INPUT(GPIOH_PIN15))
-#define VAL_GPIOH_OTYPER (PIN_OTYPE_PUSHPULL(GPIOH_OSC_IN) | \
- PIN_OTYPE_PUSHPULL(GPIOH_OSC_OUT) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN2) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN3) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN4) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN5) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN6) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN7) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN8) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN9) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN10) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN11) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN12) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN13) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN14) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN15))
-#define VAL_GPIOH_OSPEEDR (PIN_OSPEED_40M(GPIOH_OSC_IN) | \
- PIN_OSPEED_40M(GPIOH_OSC_OUT) | \
- PIN_OSPEED_400K(GPIOH_PIN2) | \
- PIN_OSPEED_400K(GPIOH_PIN3) | \
- PIN_OSPEED_400K(GPIOH_PIN4) | \
- PIN_OSPEED_400K(GPIOH_PIN5) | \
- PIN_OSPEED_400K(GPIOH_PIN6) | \
- PIN_OSPEED_400K(GPIOH_PIN7) | \
- PIN_OSPEED_400K(GPIOH_PIN8) | \
- PIN_OSPEED_400K(GPIOH_PIN9) | \
- PIN_OSPEED_400K(GPIOH_PIN10) | \
- PIN_OSPEED_400K(GPIOH_PIN11) | \
- PIN_OSPEED_400K(GPIOH_PIN12) | \
- PIN_OSPEED_400K(GPIOH_PIN13) | \
- PIN_OSPEED_400K(GPIOH_PIN14) | \
- PIN_OSPEED_400K(GPIOH_PIN15))
-#define VAL_GPIOH_PUPDR (PIN_PUPDR_FLOATING(GPIOH_OSC_IN) | \
- PIN_PUPDR_FLOATING(GPIOH_OSC_OUT) | \
- PIN_PUPDR_PULLUP(GPIOH_PIN2) | \
- PIN_PUPDR_PULLUP(GPIOH_PIN3) | \
- PIN_PUPDR_PULLUP(GPIOH_PIN4) | \
- PIN_PUPDR_PULLUP(GPIOH_PIN5) | \
- PIN_PUPDR_PULLUP(GPIOH_PIN6) | \
- PIN_PUPDR_PULLUP(GPIOH_PIN7) | \
- PIN_PUPDR_PULLUP(GPIOH_PIN8) | \
- PIN_PUPDR_PULLUP(GPIOH_PIN9) | \
- PIN_PUPDR_PULLUP(GPIOH_PIN10) | \
- PIN_PUPDR_PULLUP(GPIOH_PIN11) | \
- PIN_PUPDR_PULLUP(GPIOH_PIN12) | \
- PIN_PUPDR_PULLUP(GPIOH_PIN13) | \
- PIN_PUPDR_PULLUP(GPIOH_PIN14) | \
- PIN_PUPDR_PULLUP(GPIOH_PIN15))
-#define VAL_GPIOH_ODR (PIN_ODR_HIGH(GPIOH_OSC_IN) | \
- PIN_ODR_HIGH(GPIOH_OSC_OUT) | \
- PIN_ODR_HIGH(GPIOH_PIN2) | \
- PIN_ODR_HIGH(GPIOH_PIN3) | \
- PIN_ODR_HIGH(GPIOH_PIN4) | \
- PIN_ODR_HIGH(GPIOH_PIN5) | \
- PIN_ODR_HIGH(GPIOH_PIN6) | \
- PIN_ODR_HIGH(GPIOH_PIN7) | \
- PIN_ODR_HIGH(GPIOH_PIN8) | \
- PIN_ODR_HIGH(GPIOH_PIN9) | \
- PIN_ODR_HIGH(GPIOH_PIN10) | \
- PIN_ODR_HIGH(GPIOH_PIN11) | \
- PIN_ODR_HIGH(GPIOH_PIN12) | \
- PIN_ODR_HIGH(GPIOH_PIN13) | \
- PIN_ODR_HIGH(GPIOH_PIN14) | \
- PIN_ODR_HIGH(GPIOH_PIN15))
-#define VAL_GPIOH_AFRL (PIN_AFIO_AF(GPIOH_OSC_IN, 0) | \
- PIN_AFIO_AF(GPIOH_OSC_OUT, 0) | \
- PIN_AFIO_AF(GPIOH_PIN2, 0) | \
- PIN_AFIO_AF(GPIOH_PIN3, 0) | \
- PIN_AFIO_AF(GPIOH_PIN4, 0) | \
- PIN_AFIO_AF(GPIOH_PIN5, 0) | \
- PIN_AFIO_AF(GPIOH_PIN6, 0) | \
- PIN_AFIO_AF(GPIOH_PIN7, 0))
-#define VAL_GPIOH_AFRH (PIN_AFIO_AF(GPIOH_PIN8, 0) | \
- PIN_AFIO_AF(GPIOH_PIN9, 0) | \
- PIN_AFIO_AF(GPIOH_PIN10, 0) | \
- PIN_AFIO_AF(GPIOH_PIN11, 0) | \
- PIN_AFIO_AF(GPIOH_PIN12, 0) | \
- PIN_AFIO_AF(GPIOH_PIN13, 0) | \
- PIN_AFIO_AF(GPIOH_PIN14, 0) | \
- PIN_AFIO_AF(GPIOH_PIN15, 0))
-
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
diff --git a/boards/ST_STM32L_DISCOVERY/board.mk b/boards/ST_STM32L_DISCOVERY/board.mk deleted file mode 100644 index 7e3fdd8e3..000000000 --- a/boards/ST_STM32L_DISCOVERY/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files.
-BOARDSRC = ${CHIBIOS}/boards/ST_STM32L_DISCOVERY/board.c
-
-# Required include directories
-BOARDINC = ${CHIBIOS}/boards/ST_STM32L_DISCOVERY
diff --git a/boards/ST_STM32L_DISCOVERY/cfg/board.chcfg b/boards/ST_STM32L_DISCOVERY/cfg/board.chcfg deleted file mode 100644 index b42e09289..000000000 --- a/boards/ST_STM32L_DISCOVERY/cfg/board.chcfg +++ /dev/null @@ -1,799 +0,0 @@ -<?xml version="1.0" encoding="UTF-8"?> -<!-- STM32L1xx board Template --> -<board - xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" - xsi:noNamespaceSchemaLocation="http://www.chibios.org/xml/schema/boards/stm32l1xx_board.xsd"> - <configuration_settings> - <templates_path>resources/gencfg/processors/boards/stm32l1xx/templates</templates_path> - <output_path>..</output_path> - </configuration_settings> - <board_name>ST STM32L-Discovery</board_name> - <board_id>ST_STM32L_DISCOVERY</board_id> - <board_functions></board_functions> - <clocks - HSEFrequency="0" - HSEBypass="true" - LSEFrequency="32768" /> - <ports> - <GPIOA> - <pin0 - ID="BUTTON" - Type="PushPull" - Speed="Minimum" - Resistor="Floating" - Level="High" - Mode="Input" - Alternate="0" /> - <pin1 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" ></pin1> - <pin2 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin4 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" ></pin4> - <pin5 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin6 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin7 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin8 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin9 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin11 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin12 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin13 - ID="JTAG_TMS" - Type="PushPull" - Speed="Maximum" - Resistor="PullUp" - Level="High" - Mode="Alternate" - Alternate="0" /> - <pin14 - ID="JTAG_TCK" - Type="PushPull" - Speed="Maximum" - Resistor="PullDown" - Level="High" - Mode="Alternate" - Alternate="0" /> - <pin15 - ID="JTAG_TDI" - Type="PushPull" - Speed="Maximum" - Resistor="PullUp" - Level="High" - Mode="Alternate" - Alternate="0" /> - </GPIOA> - <GPIOB> - <pin0 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin1 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin2 - ID="BOOT1" - Type="PushPull" - Speed="Maximum" - Resistor="Floating" - Level="High" - Mode="Input" - Alternate="0" /> - <pin3 - ID="JTAG_TDO" - Type="PushPull" - Speed="Maximum" - Resistor="Floating" - Level="High" - Mode="Alternate" - Alternate="0" /> - <pin4 - ID="JTAG_TRST" - Type="PushPull" - Speed="Maximum" - Resistor="PullUp" - Level="High" - Mode="Alternate" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin6 - ID="LED4" - Type="PushPull" - Speed="Maximum" - Resistor="Floating" - Level="Low" - Mode="Output" - Alternate="0" /> - <pin7 - ID="LED3" - Type="PushPull" - Speed="Maximum" - Resistor="Floating" - Level="Low" - Mode="Output" - Alternate="0" /> - <pin8 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin9 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin11 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin12 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin13 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin14 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin15 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - </GPIOB> - <GPIOC> - <pin0 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin1 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin4 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin6 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin7 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin8 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin9 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin11 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin12 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin13 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin14 - ID="OSC32_IN" - Type="PushPull" - Speed="Maximum" - Resistor="Floating" - Level="High" - Mode="Input" - Alternate="0" /> - <pin15 - ID="OSC32_OUT" - Type="PushPull" - Speed="Maximum" - Resistor="Floating" - Level="High" - Mode="Input" - Alternate="0" /> - </GPIOC> - <GPIOD> - <pin0 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin1 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin4 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin6 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin7 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin8 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin9 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin11 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin12 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin13 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin14 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin15 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - </GPIOD> - <GPIOE> - <pin0 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin1 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin4 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin6 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin7 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin8 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin9 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin11 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin12 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin13 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin14 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin15 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - </GPIOE> - <GPIOH> - <pin0 - ID="OSC_IN" - Type="PushPull" - Speed="Maximum" - Resistor="Floating" - Level="High" - Mode="Input" - Alternate="0"></pin0> - <pin1 - ID="OSC_OUT" - Type="PushPull" - Speed="Maximum" - Resistor="Floating" - Level="High" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin4 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin6 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin7 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin8 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin9 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin11 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin12 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin13 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin14 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin15 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - </GPIOH> - </ports> -</board> diff --git a/boards/ST_STM32VL_DISCOVERY/board.c b/boards/ST_STM32VL_DISCOVERY/board.c deleted file mode 100644 index 91ae5c34a..000000000 --- a/boards/ST_STM32VL_DISCOVERY/board.c +++ /dev/null @@ -1,50 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-/**
- * @brief PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- * This variable is used by the HAL when initializing the PAL driver.
- */
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-const PALConfig pal_default_config =
-{
- {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH},
- {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH},
- {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH},
- {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH},
- {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH},
-};
-#endif
-
-/*
- * Early initialization code.
- * This initialization must be performed just after stack setup and before
- * any other initialization.
- */
-void __early_init(void) {
-
- stm32_clock_init();
-}
-
-/*
- * Board-specific initialization code.
- */
-void boardInit(void) {
-}
diff --git a/boards/ST_STM32VL_DISCOVERY/board.h b/boards/ST_STM32VL_DISCOVERY/board.h deleted file mode 100644 index 36e157d48..000000000 --- a/boards/ST_STM32VL_DISCOVERY/board.h +++ /dev/null @@ -1,143 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for STMicroelectronics STM32VL-Discovery board.
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_ST_STM32VL_DISCOVERY
-#define BOARD_NAME "ST STM32VL-Discovery"
-
-/*
- * Board frequencies.
- */
-#define STM32_LSECLK 32768
-#define STM32_HSECLK 8000000
-
-/*
- * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
- */
-#define STM32F10X_MD_VL
-
-/*
- * IO pins assignments.
- */
-#define GPIOA_BUTTON 0
-#define GPIOA_SPI1NSS 4
-
-#define GPIOB_SPI2NSS 12
-
-#define GPIOC_LED4 8
-#define GPIOC_LED3 9
-
-/*
- * I/O ports initial setup, this configuration is established soon after reset
- * in the initialization code.
- *
- * The digits have the following meaning:
- * 0 - Analog input.
- * 1 - Push Pull output 10MHz.
- * 2 - Push Pull output 2MHz.
- * 3 - Push Pull output 50MHz.
- * 4 - Digital input.
- * 5 - Open Drain output 10MHz.
- * 6 - Open Drain output 2MHz.
- * 7 - Open Drain output 50MHz.
- * 8 - Digital input with PullUp or PullDown resistor depending on ODR.
- * 9 - Alternate Push Pull output 10MHz.
- * A - Alternate Push Pull output 2MHz.
- * B - Alternate Push Pull output 50MHz.
- * C - Reserved.
- * D - Alternate Open Drain output 10MHz.
- * E - Alternate Open Drain output 2MHz.
- * F - Alternate Open Drain output 50MHz.
- * Please refer to the STM32 Reference Manual for details.
- */
-
-/*
- * Port A setup.
- * Everything input with pull-up except:
- * PA0 - Normal input (BUTTON).
- * PA2 - Alternate output (USART2 TX).
- * PA3 - Normal input (USART2 RX).
- * PA4 - Push pull output (SPI1 NSS), initially high state.
- * PA5 - Alternate output (SPI1 SCK).
- * PA6 - Normal input (SPI1 MISO).
- * PA7 - Alternate output (SPI1 MOSI).
- * PA9 - Alternate output (USART1 TX).
- * PA10 - Normal input (USART1 RX).
- */
-#define VAL_GPIOACRL 0xB4B34B84 /* PA7...PA0 */
-#define VAL_GPIOACRH 0x888884B8 /* PA15...PA8 */
-#define VAL_GPIOAODR 0xFFFFFFFF
-
-/*
- * Port B setup.
- * Everything input with pull-up except:
- * PB12 - Push pull output (SPI2 NSS), initially high state.
- * PB13 - Alternate output (SPI2 SCK).
- * PB14 - Normal input (SPI2 MISO).
- * PB15 - Alternate output (SPI2 MOSI).
- */
-#define VAL_GPIOBCRL 0x88888888 /* PB7...PB0 */
-#define VAL_GPIOBCRH 0xB4B38888 /* PB15...PB8 */
-#define VAL_GPIOBODR 0xFFFFFFFF
-
-/*
- * Port C setup.
- * Everything input with pull-up except:
- * PC8 - Push-pull output (LED4), initially low state.
- * PC9 - Push-pull output (LED3), initially low state.
- */
-#define VAL_GPIOCCRL 0x88888888 /* PC7...PC0 */
-#define VAL_GPIOCCRH 0x88888833 /* PC15...PC8 */
-#define VAL_GPIOCODR 0xFFFFFCFF
-
-/*
- * Port D setup.
- * Everything input with pull-up except:
- * PD0 - Normal input (XTAL).
- * PD1 - Normal input (XTAL).
- */
-#define VAL_GPIODCRL 0x88888844 /* PD7...PD0 */
-#define VAL_GPIODCRH 0x88888888 /* PD15...PD8 */
-#define VAL_GPIODODR 0xFFFFFFFF
-
-/*
- * Port E setup.
- * Everything input with pull-up except:
- */
-#define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */
-#define VAL_GPIOECRH 0x88888888 /* PE15...PE8 */
-#define VAL_GPIOEODR 0xFFFFFFFF
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
diff --git a/boards/ST_STM32VL_DISCOVERY/board.mk b/boards/ST_STM32VL_DISCOVERY/board.mk deleted file mode 100644 index 36467943c..000000000 --- a/boards/ST_STM32VL_DISCOVERY/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files.
-BOARDSRC = ${CHIBIOS}/boards/ST_STM32VL_DISCOVERY/board.c
-
-# Required include directories
-BOARDINC = ${CHIBIOS}/boards/ST_STM32VL_DISCOVERY
diff --git a/boards/ST_STM8L_DISCOVERY/board.c b/boards/ST_STM8L_DISCOVERY/board.c deleted file mode 100644 index d530c295c..000000000 --- a/boards/ST_STM8L_DISCOVERY/board.c +++ /dev/null @@ -1,62 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-/**
- * @brief PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- * This variable is used by the HAL when initializing the PAL driver.
- */
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-ROMCONST PALConfig pal_default_config =
-{
- {
- {VAL_GPIOAODR, 0, VAL_GPIOADDR, VAL_GPIOACR1, VAL_GPIOACR2},
- {VAL_GPIOBODR, 0, VAL_GPIOBDDR, VAL_GPIOBCR1, VAL_GPIOBCR2},
- {VAL_GPIOCODR, 0, VAL_GPIOCDDR, VAL_GPIOCCR1, VAL_GPIOCCR2},
- {VAL_GPIODODR, 0, VAL_GPIODDDR, VAL_GPIODCR1, VAL_GPIODCR2},
- {VAL_GPIOEODR, 0, VAL_GPIOEDDR, VAL_GPIOECR1, VAL_GPIOECR2},
- {VAL_GPIOFODR, 0, VAL_GPIOFDDR, VAL_GPIOFCR1, VAL_GPIOFCR2},
- }
-};
-#endif
-
-/*
- * TIM 2 clock after the prescaler.
- */
-#define TIM2_CLOCK (SYSCLK / 16)
-#define TIM2_ARR ((TIM2_CLOCK / CH_FREQUENCY) - 1)
-
-/*
- * Board-specific initialization code.
- */
-void boardInit(void) {
-
- /*
- * TIM2 initialization as system tick.
- */
- CLK->PCKENR1 |= CLK_PCKENR1_TIM2;
- TIM2->PSCR = 4; /* Prescaler divide by 2^4=16.*/
- TIM2->ARRH = (uint8_t)(TIM2_ARR >> 8);
- TIM2->ARRL = (uint8_t)(TIM2_ARR);
- TIM2->CNTRH = 0;
- TIM2->CNTRL = 0;
- TIM2->SR1 = 0;
- TIM2->IER = TIM_IER_UIE;
- TIM2->CR1 = TIM_CR1_CEN;
-}
diff --git a/boards/ST_STM8L_DISCOVERY/board.h b/boards/ST_STM8L_DISCOVERY/board.h deleted file mode 100644 index 907279ee7..000000000 --- a/boards/ST_STM8L_DISCOVERY/board.h +++ /dev/null @@ -1,167 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for STMicroelectronics STM8L-Discovery board.
- */
-
-/*
- * Board identifiers.
- */
-#define BOARD_ST_STM8L_DISCOVERY
-#define BOARD_NAME "ST STM8L-Discovery"
-
-/*
- * Board frequencies and bypass modes.
- *
- * The bypass must be set to TRUE if the chip is driven by an external
- * oscillator rather than a crystal. Frequency must be set to zero if
- * the clock source is not used at all.
- * The following constants are used by the HAL low level driver for
- * correct clock initialization.
- */
-#define HSECLK 0
-#define HSEBYPASS FALSE
-#define LSECLK 32768
-#define LSEBYPASS FALSE
-
-/*
- * MCU model used on the board.
- */
-#define STM8L152C6
-#define STM8L15X_MD
-
-/*
- * Pin definitions.
- */
-#define PA_OSC_IN 2
-#define PA_OSC_OUT 3
-#define PA_LCD_COM0 4
-#define PA_LCD_COM1 5
-#define PA_LCD_COM2 6
-#define PA_LCD_SEG0 7
-
-#define PB_LCD_SEG10 0
-#define PB_LCD_SEG11 1
-#define PB_LCD_SEG12 2
-#define PB_LCD_SEG13 3
-#define PB_LCD_SEG14 4
-#define PB_LCD_SEG15 5
-#define PB_LCD_SEG16 6
-#define PB_LCD_SEG17 7
-
-#define PC_UNUSED 0
-#define PC_BUTTON 1
-#define PC_LCD_SEG22 2
-#define PC_LCD_SEG23 3
-#define PC_IDD_CNT_EN 4
-#define PC_LED4 7
-
-#define PD_LCD_SEG7 0
-#define PD_LCD_COM3 1
-#define PD_LCD_SEG8 2
-#define PD_LCD_SEG9 3
-#define PD_LCD_SEG18 4
-#define PD_LCD_SEG19 5
-#define PD_LCD_SEG20 6
-#define PD_LCD_SEG21 7
-
-#define PE_LCD_SEG1 0
-#define PE_LCD_SEG2 1
-#define PE_LCD_SEG3 2
-#define PE_LCD_SEG4 3
-#define PE_LCD_SEG5 4
-#define PE_LCD_SEG6 5
-#define PE_IDD_WAKEUP 6
-#define PE_LED3 7
-
-#define PF0_IDD_MEASUREMENT 0
-
-/*
- * Port A initial setup.
- */
-#define VAL_GPIOAODR 0
-#define VAL_GPIOADDR 0 /* All inputs. */
-#define VAL_GPIOACR1 0xFF /* All pull-up/push-pull. */
-#define VAL_GPIOACR2 0
-
-/*
- * Port B initial setup.
- */
-#define VAL_GPIOBODR 0
-#define VAL_GPIOBDDR 0 /* All inputs. */
-#define VAL_GPIOBCR1 0xFF /* All pull-up/push-pull. */
-#define VAL_GPIOBCR2 0
-
-/*
- * Port C initial setup.
- */
-#define VAL_GPIOCODR 0
-#define VAL_GPIOCDDR (1 << PC_LED4)
-#define VAL_GPIOCCR1 0xFF /* All pull-up/push-pull. */
-#define VAL_GPIOCCR2 0
-
-/*
- * Port D initial setup.
- */
-#define VAL_GPIODODR 0
-#define VAL_GPIODDDR 0 /* All inputs. */
-#define VAL_GPIODCR1 0xFF /* All pull-up/push-pull. */
-#define VAL_GPIODCR2 0
-
-/*
- * Port E initial setup.
- */
-#define VAL_GPIOEODR 0
-#define VAL_GPIOEDDR (1 << PE_LED3)
-#define VAL_GPIOECR1 0xFF /* All pull-up/push-pull. */
-#define VAL_GPIOECR2 0
-
-/*
- * Port F initial setup.
- */
-#define VAL_GPIOFODR 0
-#define VAL_GPIOFDDR 0 /* All inputs. */
-#define VAL_GPIOFCR1 0xFF /* All pull-up/push-pull. */
-#define VAL_GPIOFCR2 0
-
-/*
- * TIM2-update ISR segment code. This code is injected into the appropriate
- * ISR by the HAL.
- */
-#define _TIM2_UPDATE_ISR() { \
- if (TIM2->SR1 & TIM_SR1_UIF) { \
- chSysLockFromIsr(); \
- chSysTimerHandlerI(); \
- chSysUnlockFromIsr(); \
- TIM2->SR1 = 0; \
- } \
-}
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
diff --git a/boards/ST_STM8S_DISCOVERY/board.c b/boards/ST_STM8S_DISCOVERY/board.c deleted file mode 100644 index 33e1fa1e9..000000000 --- a/boards/ST_STM8S_DISCOVERY/board.c +++ /dev/null @@ -1,78 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-/**
- * @brief PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- */
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-ROMCONST PALConfig pal_default_config =
-{
- {
- {VAL_GPIOAODR, 0, VAL_GPIOADDR, VAL_GPIOACR1, VAL_GPIOACR2},
- {VAL_GPIOBODR, 0, VAL_GPIOBDDR, VAL_GPIOBCR1, VAL_GPIOBCR2},
- {VAL_GPIOCODR, 0, VAL_GPIOCDDR, VAL_GPIOCCR1, VAL_GPIOCCR2},
- {VAL_GPIODODR, 0, VAL_GPIODDDR, VAL_GPIODCR1, VAL_GPIODCR2},
- {VAL_GPIOEODR, 0, VAL_GPIOEDDR, VAL_GPIOECR1, VAL_GPIOECR2},
- {VAL_GPIOFODR, 0, VAL_GPIOFDDR, VAL_GPIOFCR1, VAL_GPIOFCR2},
- {VAL_GPIOGODR, 0, VAL_GPIOGDDR, VAL_GPIOGCR1, VAL_GPIOGCR2},
- }
-};
-#endif
-
-/*
- * TIM 2 clock after the prescaler.
- */
-#define TIM2_CLOCK (SYSCLK / 16)
-#define TIM2_ARR ((TIM2_CLOCK / CH_FREQUENCY) - 1)
-
-/*
- * TIM2 interrupt handler.
- */
-CH_IRQ_HANDLER(13) {
-
- CH_IRQ_PROLOGUE();
-
- chSysLockFromIsr();
- chSysTimerHandlerI();
- chSysUnlockFromIsr();
-
- TIM2->SR1 = 0;
-
- CH_IRQ_EPILOGUE();
-}
-
-/*
- * Board-specific initialization code.
- */
-void boardInit(void) {
-
- /*
- * TIM2 initialization as system tick.
- */
- CLK->PCKENR1 |= CLK_PCKENR1_TIM2;
- TIM2->PSCR = 4; /* Prescaler divide by 2^4=16.*/
- TIM2->ARRH = (uint8_t)(TIM2_ARR >> 8);
- TIM2->ARRL = (uint8_t)(TIM2_ARR);
- TIM2->CNTRH = 0;
- TIM2->CNTRL = 0;
- TIM2->SR1 = 0;
- TIM2->IER = TIM2_IER_UIE;
- TIM2->CR1 = TIM2_CR1_CEN;
-}
diff --git a/boards/ST_STM8S_DISCOVERY/board.h b/boards/ST_STM8S_DISCOVERY/board.h deleted file mode 100644 index 70e8682da..000000000 --- a/boards/ST_STM8S_DISCOVERY/board.h +++ /dev/null @@ -1,121 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for STMicroelectronics STM8S-Discovery board.
- */
-
-/*
- * Board identifiers.
- */
-#define BOARD_ST_STM8S_DISCOVERY
-#define BOARD_NAME "ST STM8S-Discovery"
-
-/*
- * Board frequencies.
- */
-#define HSECLK 16000000
-
-/*
- * MCU model used on the board.
- */
-#define STM8S105
-
-/*
- * Pin definitions.
- */
-#define PA_OSCIN 1
-#define PA_OSCOUT 2
-
-#define PC_TS_KEY 1
-#define PC_TS_LOADREF 2
-#define PC_TS_SHIELD 3
-
-#define PD_LD10 0
-#define PD_SWIM 1
-#define PD_TX 5
-#define PD_RX 6
-
-/*
- * Port A initial setup.
- */
-#define VAL_GPIOAODR 0
-#define VAL_GPIOADDR 0 /* All inputs. */
-#define VAL_GPIOACR1 0xFF /* All pull-up or push-pull. */
-#define VAL_GPIOACR2 0
-
-/*
- * Port B initial setup.
- */
-#define VAL_GPIOBODR 0
-#define VAL_GPIOBDDR 0 /* All inputs. */
-#define VAL_GPIOBCR1 0xFF /* All push-pull. */
-#define VAL_GPIOBCR2 0
-
-/*
- * Port C initial setup.
- */
-#define VAL_GPIOCODR 0
-#define VAL_GPIOCDDR 0 /* All inputs. */
-#define VAL_GPIOCCR1 0xFF /* All pull-up. */
-#define VAL_GPIOCCR2 0
-
-/*
- * Port D initial setup.
- */
-#define VAL_GPIODODR (1 << PD_LD10) | (1 << PD_TX)
-#define VAL_GPIODDDR (1 << PD_LD10) | (1 << PD_TX)
-#define VAL_GPIODCR1 0xFF /* All pull-up. */
-#define VAL_GPIODCR2 0
-
-/*
- * Port E initial setup.
- */
-#define VAL_GPIOEODR 0
-#define VAL_GPIOEDDR 0 /* All inputs. */
-#define VAL_GPIOECR1 0xFF /* All pull-up. */
-#define VAL_GPIOECR2 0
-
-/*
- * Port F initial setup.
- */
-#define VAL_GPIOFODR 0
-#define VAL_GPIOFDDR 0 /* All inputs. */
-#define VAL_GPIOFCR1 0xFF /* All pull-up. */
-#define VAL_GPIOFCR2 0
-
-/*
- * Port G initial setup.
- */
-#define VAL_GPIOGODR 0
-#define VAL_GPIOGDDR 0 /* All inputs. */
-#define VAL_GPIOGCR1 0xFF /* All pull-up or push-pull. */
-#define VAL_GPIOGCR2 0
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
diff --git a/boards/readme.txt b/boards/readme.txt deleted file mode 100644 index b08a21bfb..000000000 --- a/boards/readme.txt +++ /dev/null @@ -1,6 +0,0 @@ -This directory contains the support files for various board models. If you
-want to support a new board:
-- Create a new directory under ./boards, give it the name of your board.
-- Copy inside the new directory the files from a similar board.
-- Customize board.c, board.h and board.mk in order to correctly initialize
- your board.
diff --git a/boards/simulator/board.c b/boards/simulator/board.c deleted file mode 100644 index 6912c20ad..000000000 --- a/boards/simulator/board.c +++ /dev/null @@ -1,35 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-/**
- * @brief PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- */
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-const PALConfig pal_default_config = {
- {0, 0, 0},
- {0, 0, 0}
-};
-#endif
-
-/*
- * Board-specific initialization code.
- */
-void boardInit(void) {
-}
diff --git a/boards/simulator/board.h b/boards/simulator/board.h deleted file mode 100644 index ee9b14e73..000000000 --- a/boards/simulator/board.h +++ /dev/null @@ -1,30 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
diff --git a/boards/simulator/board.mk b/boards/simulator/board.mk deleted file mode 100644 index a48747c66..000000000 --- a/boards/simulator/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the simulator board related files.
-BOARDSRC = ${CHIBIOS}/boards/simulator/board.c
-
-# Required include directories
-BOARDINC = ${CHIBIOS}/boards/simulator
|