diff options
Diffstat (limited to 'boards/OLIMEX_STM32-P407/board.h')
| -rw-r--r-- | boards/OLIMEX_STM32-P407/board.h | 465 |
1 files changed, 465 insertions, 0 deletions
diff --git a/boards/OLIMEX_STM32-P407/board.h b/boards/OLIMEX_STM32-P407/board.h new file mode 100644 index 000000000..7b423c5b7 --- /dev/null +++ b/boards/OLIMEX_STM32-P407/board.h @@ -0,0 +1,465 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
+ 2011,2012 Giovanni Di Sirio.
+
+ This file is part of ChibiOS/RT.
+
+ ChibiOS/RT is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ ChibiOS/RT is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+/*
+ * Setup for Olimex STM32-P407 board.
+ * NOTE: Part of JTAG signals are used for other functions, this board can be
+ * used using SWD only.
+ */
+
+/*
+ * Board identifier.
+ */
+#define BOARD_OLIMEX_STM32_P407
+#define BOARD_NAME "Olimex STM32-P407"
+
+/*
+ * Board frequencies.
+ * NOTE: The LSE crystal is not fitted by default on the board.
+ */
+#define STM32_LSECLK 32768
+#define STM32_HSECLK 25000000
+
+/*
+ * Board voltages.
+ * Required for performance limits calculation.
+ */
+#define STM32_VDD 330
+
+/*
+ * MCU type as defined in the ST header file stm32f4xx.h.
+ */
+#define STM32F4XX
+
+/*
+ * IO pins assignments.
+ */
+#define GPIOA_BUTTON_WKUP 0
+#define GPIOA_ETH_RMII_REF_CLK 1
+#define GPIOA_ETH_RMII_MDIO 2
+#define GPIOA_ETH_RMII_MDINT 3
+#define GPIOA_DCMI_HSYNC 4
+#define GPIOA_USELESS5 5
+#define GPIOA_DCMI_PIXCLK 6
+#define GPIOA_ETH_RMII_CRS_DV 7
+#define GPIOA_MCO1 8
+#define GPIOA_OTG_FS_VBUS 9
+#define GPIOA_DCMI_D1 10
+#define GPIOA_OTG_FS_DM 11
+#define GPIOA_OTG_FS_DP 12
+#define GPIOA_SWDIO 13
+#define GPIOA_SWCLK 14
+#define GPIOA_I2S3_WS 15
+
+#define GPIOB_LCD_BL 0
+#define GPIOB_BUZ 1
+#define GPIOB_CAM_ENB 2
+#define GPIOB_I2S3_CK 3
+#define GPIOB_USELESS4 4
+#define GPIOB_I2S3_SD 5
+#define GPIOB_DCMI_D5 6
+#define GPIOB_DCMI_VSYNC 7
+#define GPIOB_CAN1_RX 8
+#define GPIOB_CAN1_TX 9
+#define GPIOB_USB_FS_FAULT 10
+#define GPIOB_ETH_RMII_TX_EN 11
+#define GPIOB_OTG_HS_ID 12
+#define GPIOB_OTG_HS_VBUS 13
+#define GPIOB_OTG_HS_DM 14
+#define GPIOB_OTG_HS_DP 15
+
+#define GPIOC_TRIM 0
+#define GPIOC_ETH_RMII_MDC 1
+#define GPIOC_USB_FS_VBUSON 2
+#define GPIOC_USELESS3 3
+#define GPIOC_ETH_RMII_RXD0 4
+#define GPIOC_ETH_RMII_RXD1 5
+#define GPIOC_USELESS6 6
+#define GPIOC_I2S3_MCK 7
+#define GPIOC_DCMI_D2 8
+#define GPIOC_DCMI_D3 9
+#define GPIOC_SPI3_SCK 10
+#define GPIOC_SPI3_MISO 11
+#define GPIOC_SPI3_MOSI 12
+#define GPIOC_BUTTON_TAMPER 13
+#define GPIOC_OSC32_IN 14
+#define GPIOC_OSC32_OUT 15
+
+/*
+ * I/O ports initial setup, this configuration is established soon after reset
+ * in the initialization code.
+ * Please refer to the STM32 Reference Manual for details.
+ */
+#define PIN_MODE_INPUT(n) (0U << ((n) * 2))
+#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2))
+#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2))
+#define PIN_MODE_ANALOG(n) (3U << ((n) * 2))
+#define PIN_OTYPE_PUSHPULL(n) (0U << (n))
+#define PIN_OTYPE_OPENDRAIN(n) (1U << (n))
+#define PIN_OSPEED_2M(n) (0U << ((n) * 2))
+#define PIN_OSPEED_25M(n) (1U << ((n) * 2))
+#define PIN_OSPEED_50M(n) (2U << ((n) * 2))
+#define PIN_OSPEED_100M(n) (3U << ((n) * 2))
+#define PIN_PUDR_FLOATING(n) (0U << ((n) * 2))
+#define PIN_PUDR_PULLUP(n) (1U << ((n) * 2))
+#define PIN_PUDR_PULLDOWN(n) (2U << ((n) * 2))
+#define PIN_AFIO_AF(n, v) ((v##U) << ((n % 8) * 4))
+
+/*
+ * Port A setup.
+ * All input with pull-up except:
+ * PA0 - GPIOA_BUTTON_WKUP (input floating).
+ * PA1 - GPIOA_ETH_RMII_REF_CLK(alternate 11).
+ * PA2 - GPIOA_ETH_RMII_MDIO (alternate 11).
+ * PA3 - GPIOA_ETH_RMII_MDINT (input floating).
+ * PA4 - GPIOA_DCMI_HSYNC (input pull-up).
+ * PA5 - GPIOA_USELESS5 (input pull-up).
+ * PA6 - GPIOA_DCMI_PIXCLK (input pull-up).
+ * PA7 - GPIOA_ETH_RMII_CRS_DV (alternate 11).
+ * PA8 - GPIOA_MCO1 (alternate 0).
+ * PA9 - GPIOA_OTG_FS_VBUS (input pull-up).
+ * PA10 - GPIOA_DCMI_D1 (input pull-up).
+ * PA11 - GPIOA_OTG_FS_DM (alternate 10).
+ * PA12 - GPIOA_OTG_FS_DP (alternate 10).
+ * PA13 - GPIOA_SWDIO (alternate 0).
+ * PA14 - GPIOA_SWCLK (alternate 0, pull-down).
+ * PA15 - GPIOA_I2S3_WS (alternate 6).
+ */
+#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_BUTTON_WKUP) | \
+ PIN_MODE_ALTERNATE(GPIOA_ETH_RMII_REF_CLK) | \
+ PIN_MODE_ALTERNATE(GPIOA_ETH_RMII_MDIO) | \
+ PIN_MODE_INPUT(GPIOA_ETH_RMII_MDINT) | \
+ PIN_MODE_INPUT(GPIOA_DCMI_HSYNC) | \
+ PIN_MODE_INPUT(GPIOA_USELESS5) | \
+ PIN_MODE_INPUT(GPIOA_DCMI_PIXCLK) | \
+ PIN_MODE_ALTERNATE(GPIOA_ETH_RMII_CRS_DV) | \
+ PIN_MODE_ALTERNATE(GPIOA_MCO1) | \
+ PIN_MODE_INPUT(GPIOA_OTG_FS_VBUS) | \
+ PIN_MODE_INPUT(GPIOA_DCMI_D1) | \
+ PIN_MODE_ALTERNATE(GPIOA_OTG_FS_DM) | \
+ PIN_MODE_ALTERNATE(GPIOA_OTG_FS_DP) | \
+ PIN_MODE_ALTERNATE(GPIOA_SWDIO) | \
+ PIN_MODE_ALTERNATE(GPIOA_SWCLK) | \
+ PIN_MODE_ALTERNATE(GPIOA_I2S3_WS))
+#define VAL_GPIOA_OTYPER 0x00000000
+#define VAL_GPIOA_OSPEEDR 0xFFFFFFFF
+#define VAL_GPIOA_PUPDR (PIN_PUDR_PULLUP(GPIOA_DCMI_HSYNC) | \
+ PIN_PUDR_PULLUP(GPIOA_USELESS5) | \
+ PIN_PUDR_PULLUP(GPIOA_DCMI_PIXCLK) | \
+ PIN_PUDR_PULLUP(GPIOA_OTG_FS_VBUS) | \
+ PIN_PUDR_PULLUP(GPIOA_DCMI_D1) | \
+ PIN_PUDR_PULLDOWN(GPIOA_SWCLK))
+#define VAL_GPIOA_ODR 0xFFFFFFFF
+#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_ETH_RMII_REF_CLK, 11) | \
+ PIN_AFIO_AF(GPIOA_ETH_RMII_MDIO, 11) | \
+ PIN_AFIO_AF(GPIOA_ETH_RMII_CRS_DV, 11))
+#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_MCO1, 0) | \
+ PIN_AFIO_AF(GPIOA_OTG_FS_DM, 10) | \
+ PIN_AFIO_AF(GPIOA_OTG_FS_DP, 10) | \
+ PIN_AFIO_AF(GPIOA_SWDIO, 0) | \
+ PIN_AFIO_AF(GPIOA_SWCLK, 0) | \
+ PIN_AFIO_AF(GPIOA_I2S3_WS, 6))
+
+/*
+ * Port B setup.
+ * All input with pull-up except:
+ * PB0 - GPIOB_LCD_BL (output push-pull).
+ * PB1 - GPIOB_BUZ (output push-pull).
+ * PB2 - GPIOB_CAM_ENB (input floating).
+ * PB3 - GPIOB_I2S3_CK (alternate 6).
+ * PB4 - GPIOB_USELESS4 (input pull-up).
+ * PB5 - GPIOB_I2S3_SD (alternate 6).
+ * PB6 - GPIOB_DCMI_D5 (input pull-up).
+ * PB7 - GPIOB_DCMI_VSYNC (input pull-up).
+ * PB8 - GPIOB_CAN1_RX (alternate 9).
+ * PB9 - GPIOB_CAN1_TX (alternate 9).
+ * PB10 - GPIOB_USB_FS_FAULT (input floating).
+ * PB11 - GPIOB_ETH_RMII_TX_EN (alternate 11).
+ * PB12 - GPIOB_OTG_HS_ID (alternate 12).
+ * PB13 - GPIOB_OTG_HS_VBUS (input pull-up).
+ * PB14 - GPIOB_OTG_HS_DM (alternate 12).
+ * PB15 - GPIOB_OTG_HS_DP (alternate 12).
+ */
+#define VAL_GPIOB_MODER (PIN_MODE_OUTPUT(GPIOB_LCD_BL) | \
+ PIN_MODE_OUTPUT(GPIOB_BUZ) | \
+ PIN_MODE_INPUT(GPIOB_CAM_ENB) | \
+ PIN_MODE_ALTERNATE(GPIOB_I2S3_CK) | \
+ PIN_MODE_INPUT(GPIOB_USELESS4) | \
+ PIN_MODE_ALTERNATE(GPIOB_I2S3_SD) | \
+ PIN_MODE_INPUT(GPIOB_DCMI_D5) | \
+ PIN_MODE_INPUT(GPIOB_DCMI_VSYNC) | \
+ PIN_MODE_ALTERNATE(GPIOB_CAN1_RX) | \
+ PIN_MODE_ALTERNATE(GPIOB_CAN1_TX) | \
+ PIN_MODE_INPUT(GPIOB_USB_FS_FAULT) | \
+ PIN_MODE_ALTERNATE(GPIOB_ETH_RMII_TX_EN) | \
+ PIN_MODE_ALTERNATE(GPIOB_OTG_HS_ID) | \
+ PIN_MODE_INPUT(GPIOB_OTG_HS_VBUS) | \
+ PIN_MODE_ALTERNATE(GPIOB_OTG_HS_DM) | \
+ PIN_MODE_ALTERNATE(GPIOB_OTG_HS_DP))
+#define VAL_GPIOB_OTYPER 0x00000000
+#define VAL_GPIOB_OSPEEDR 0xFFFFFFFF
+#define VAL_GPIOB_PUPDR (PIN_PUDR_PULLUP(GPIOB_USELESS4) | \
+ PIN_PUDR_PULLUP(GPIOB_DCMI_D5) | \
+ PIN_PUDR_PULLUP(GPIOB_DCMI_VSYNC) | \
+ PIN_PUDR_PULLUP(GPIOB_OTG_HS_VBUS))
+#define VAL_GPIOB_ODR 0xFFFFFFFF
+#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_I2S3_CK, 6) | \
+ PIN_AFIO_AF(GPIOB_I2S3_SD, 6))
+#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_CAN1_RX, 9) | \
+ PIN_AFIO_AF(GPIOB_CAN1_TX, 9) | \
+ PIN_AFIO_AF(GPIOB_ETH_RMII_TX_EN, 11) | \
+ PIN_AFIO_AF(GPIOB_OTG_HS_ID, 12) | \
+ PIN_AFIO_AF(GPIOB_OTG_HS_DM, 12) | \
+ PIN_AFIO_AF(GPIOB_OTG_HS_DP, 12))
+
+/*
+ * Port C setup.
+ * All input with pull-up except:
+ * PC0 - GPIOC_OTG_FS_POWER_ON (output push-pull).
+ * PC7 - GPIOC_MCLK (alternate 6).
+ * PC10 - GPIOC_SCLK (alternate 6).
+ * PC12 - GPIOC_SDIN (alternate 6).
+ */
+#define VAL_GPIOC_MODER (PIN_MODE_OUTPUT(GPIOC_OTG_FS_POWER_ON) |\
+ PIN_MODE_INPUT(1) | \
+ PIN_MODE_INPUT(2) | \
+ PIN_MODE_INPUT(3) | \
+ PIN_MODE_INPUT(4) | \
+ PIN_MODE_INPUT(5) | \
+ PIN_MODE_INPUT(6) | \
+ PIN_MODE_ALTERNATE(GPIOC_MCLK) | \
+ PIN_MODE_INPUT(8) | \
+ PIN_MODE_INPUT(9) | \
+ PIN_MODE_ALTERNATE(GPIOC_SCLK) | \
+ PIN_MODE_INPUT(11) | \
+ PIN_MODE_ALTERNATE(GPIOC_SDIN) | \
+ PIN_MODE_INPUT(13) | \
+ PIN_MODE_INPUT(14) | \
+ PIN_MODE_INPUT(15))
+#define VAL_GPIOC_OTYPER 0x00000000
+#define VAL_GPIOC_OSPEEDR 0xFFFFFFFF
+#define VAL_GPIOC_PUPDR (PIN_PUDR_FLOATING(GPIOC_OTG_FS_POWER_ON) |\
+ PIN_PUDR_PULLUP(1) | \
+ PIN_PUDR_PULLUP(2) | \
+ PIN_PUDR_PULLUP(3) | \
+ PIN_PUDR_PULLUP(4) | \
+ PIN_PUDR_PULLUP(5) | \
+ PIN_PUDR_PULLUP(6) | \
+ PIN_PUDR_FLOATING(GPIOC_MCLK) | \
+ PIN_PUDR_PULLUP(8) | \
+ PIN_PUDR_PULLUP(9) | \
+ PIN_PUDR_FLOATING(GPIOC_SCLK) | \
+ PIN_PUDR_PULLUP(11) | \
+ PIN_PUDR_FLOATING(GPIOC_SDIN) | \
+ PIN_PUDR_PULLUP(13) | \
+ PIN_PUDR_PULLUP(14) | \
+ PIN_PUDR_PULLUP(15))
+#define VAL_GPIOC_ODR 0xFFFFFFFF
+#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_MCLK, 6))
+#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_SCLK, 6) | \
+ PIN_AFIO_AF(GPIOC_SDIN, 6))
+
+/*
+ * Port D setup.
+ * All input with pull-up except:
+ * PD4 - GPIOD_RESET (output push-pull).
+ * PD5 - GPIOD_OVER_CURRENT (input floating).
+ * PD12 - GPIOD_LED4 (output push-pull).
+ * PD13 - GPIOD_LED3 (output push-pull).
+ * PD14 - GPIOD_LED5 (output push-pull).
+ * PD15 - GPIOD_LED6 (output push-pull).
+ */
+#define VAL_GPIOD_MODER (PIN_MODE_INPUT(0) | \
+ PIN_MODE_INPUT(1) | \
+ PIN_MODE_INPUT(2) | \
+ PIN_MODE_INPUT(3) | \
+ PIN_MODE_OUTPUT(GPIOD_RESET) | \
+ PIN_MODE_INPUT(GPIOD_OVER_CURRENT) | \
+ PIN_MODE_INPUT(6) | \
+ PIN_MODE_INPUT(7) | \
+ PIN_MODE_INPUT(8) | \
+ PIN_MODE_INPUT(9) | \
+ PIN_MODE_INPUT(10) | \
+ PIN_MODE_INPUT(11) | \
+ PIN_MODE_OUTPUT(GPIOD_LED4) | \
+ PIN_MODE_OUTPUT(GPIOD_LED3) | \
+ PIN_MODE_OUTPUT(GPIOD_LED5) | \
+ PIN_MODE_OUTPUT(GPIOD_LED6))
+#define VAL_GPIOD_OTYPER 0x00000000
+#define VAL_GPIOD_OSPEEDR 0xFFFFFFFF
+#define VAL_GPIOD_PUPDR (PIN_PUDR_PULLUP(0) | \
+ PIN_PUDR_PULLUP(1) | \
+ PIN_PUDR_PULLUP(2) | \
+ PIN_PUDR_PULLUP(3) | \
+ PIN_PUDR_FLOATING(GPIOD_RESET) | \
+ PIN_PUDR_FLOATING(GPIOD_OVER_CURRENT) |\
+ PIN_PUDR_PULLUP(6) | \
+ PIN_PUDR_PULLUP(7) | \
+ PIN_PUDR_PULLUP(8) | \
+ PIN_PUDR_PULLUP(9) | \
+ PIN_PUDR_PULLUP(10) | \
+ PIN_PUDR_PULLUP(11) | \
+ PIN_PUDR_FLOATING(GPIOD_LED4) | \
+ PIN_PUDR_FLOATING(GPIOD_LED3) | \
+ PIN_PUDR_FLOATING(GPIOD_LED5) | \
+ PIN_PUDR_FLOATING(GPIOD_LED6))
+#define VAL_GPIOD_ODR 0x00000FCF
+#define VAL_GPIOD_AFRL 0x00000000
+#define VAL_GPIOD_AFRH 0x00000000
+
+/*
+ * Port E setup.
+ * All input with pull-up except:
+ * PE0 - GPIOE_INT1 (input floating).
+ * PE1 - GPIOE_INT2 (input floating).
+ * PE3 - GPIOE_CS_SPI (output push-pull).
+ */
+#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_INT1) | \
+ PIN_MODE_INPUT(GPIOE_INT2) | \
+ PIN_MODE_INPUT(2) | \
+ PIN_MODE_OUTPUT(GPIOE_CS_SPI) | \
+ PIN_MODE_INPUT(4) | \
+ PIN_MODE_INPUT(5) | \
+ PIN_MODE_INPUT(6) | \
+ PIN_MODE_INPUT(7) | \
+ PIN_MODE_INPUT(8) | \
+ PIN_MODE_INPUT(9) | \
+ PIN_MODE_INPUT(10) | \
+ PIN_MODE_INPUT(11) | \
+ PIN_MODE_INPUT(12) | \
+ PIN_MODE_INPUT(13) | \
+ PIN_MODE_INPUT(14) | \
+ PIN_MODE_INPUT(15))
+#define VAL_GPIOE_OTYPER 0x00000000
+#define VAL_GPIOE_OSPEEDR 0xFFFFFFFF
+#define VAL_GPIOE_PUPDR (PIN_PUDR_FLOATING(GPIOE_INT1) | \
+ PIN_PUDR_FLOATING(GPIOE_INT2) | \
+ PIN_PUDR_PULLUP(2) | \
+ PIN_PUDR_FLOATING(GPIOE_CS_SPI) | \
+ PIN_PUDR_PULLUP(4) | \
+ PIN_PUDR_PULLUP(5) | \
+ PIN_PUDR_PULLUP(6) | \
+ PIN_PUDR_PULLUP(7) | \
+ PIN_PUDR_PULLUP(8) | \
+ PIN_PUDR_PULLUP(9) | \
+ PIN_PUDR_PULLUP(10) | \
+ PIN_PUDR_PULLUP(11) | \
+ PIN_PUDR_PULLUP(12) | \
+ PIN_PUDR_PULLUP(13) | \
+ PIN_PUDR_PULLUP(14) | \
+ PIN_PUDR_PULLUP(15))
+#define VAL_GPIOE_ODR 0xFFFFFFFF
+#define VAL_GPIOE_AFRL 0x00000000
+#define VAL_GPIOE_AFRH 0x00000000
+
+/*
+ * Port F setup.
+ * All input with pull-up.
+ */
+#define VAL_GPIOF_MODER 0x00000000
+#define VAL_GPIOF_OTYPER 0x00000000
+#define VAL_GPIOF_OSPEEDR 0xFFFFFFFF
+#define VAL_GPIOF_PUPDR 0xFFFFFFFF
+#define VAL_GPIOF_ODR 0xFFFFFFFF
+#define VAL_GPIOF_AFRL 0x00000000
+#define VAL_GPIOF_AFRH 0x00000000
+
+/*
+ * Port G setup.
+ * All input with pull-up.
+ */
+#define VAL_GPIOG_MODER 0x00000000
+#define VAL_GPIOG_OTYPER 0x00000000
+#define VAL_GPIOG_OSPEEDR 0xFFFFFFFF
+#define VAL_GPIOG_PUPDR 0xFFFFFFFF
+#define VAL_GPIOG_ODR 0xFFFFFFFF
+#define VAL_GPIOG_AFRL 0x00000000
+#define VAL_GPIOG_AFRH 0x00000000
+
+/*
+ * Port H setup.
+ * All input with pull-up except:
+ * PH0 - GPIOH_OSC_IN (input floating).
+ * PH1 - GPIOH_OSC_OUT (input floating).
+ */
+#define VAL_GPIOH_MODER (PIN_MODE_INPUT(GPIOH_OSC_IN) | \
+ PIN_MODE_INPUT(GPIOH_OSC_OUT) | \
+ PIN_MODE_INPUT(2) | \
+ PIN_MODE_INPUT(3) | \
+ PIN_MODE_INPUT(4) | \
+ PIN_MODE_INPUT(5) | \
+ PIN_MODE_INPUT(6) | \
+ PIN_MODE_INPUT(7) | \
+ PIN_MODE_INPUT(8) | \
+ PIN_MODE_INPUT(9) | \
+ PIN_MODE_INPUT(10) | \
+ PIN_MODE_INPUT(11) | \
+ PIN_MODE_INPUT(12) | \
+ PIN_MODE_INPUT(13) | \
+ PIN_MODE_INPUT(14) | \
+ PIN_MODE_INPUT(15))
+#define VAL_GPIOH_OTYPER 0x00000000
+#define VAL_GPIOH_OSPEEDR 0xFFFFFFFF
+#define VAL_GPIOH_PUPDR (PIN_PUDR_FLOATING(GPIOH_OSC_IN) | \
+ PIN_PUDR_FLOATING(GPIOH_OSC_OUT) | \
+ PIN_PUDR_PULLUP(2) | \
+ PIN_PUDR_PULLUP(3) | \
+ PIN_PUDR_PULLUP(4) | \
+ PIN_PUDR_PULLUP(5) | \
+ PIN_PUDR_PULLUP(6) | \
+ PIN_PUDR_PULLUP(7) | \
+ PIN_PUDR_PULLUP(8) | \
+ PIN_PUDR_PULLUP(9) | \
+ PIN_PUDR_PULLUP(10) | \
+ PIN_PUDR_PULLUP(11) | \
+ PIN_PUDR_PULLUP(12) | \
+ PIN_PUDR_PULLUP(13) | \
+ PIN_PUDR_PULLUP(14) | \
+ PIN_PUDR_PULLUP(15))
+#define VAL_GPIOH_ODR 0xFFFFFFFF
+#define VAL_GPIOH_AFRL 0x00000000
+#define VAL_GPIOH_AFRH 0x00000000
+
+/*
+ * Port I setup.
+ * All input with pull-up.
+ */
+#define VAL_GPIOI_MODER 0x00000000
+#define VAL_GPIOI_OTYPER 0x00000000
+#define VAL_GPIOI_OSPEEDR 0xFFFFFFFF
+#define VAL_GPIOI_PUPDR 0xFFFFFFFF
+#define VAL_GPIOI_ODR 0xFFFFFFFF
+#define VAL_GPIOI_AFRL 0x00000000
+#define VAL_GPIOI_AFRH 0x00000000
+
+#if !defined(_FROM_ASM_)
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void boardInit(void);
+#ifdef __cplusplus
+}
+#endif
+#endif /* _FROM_ASM_ */
+
+#endif /* _BOARD_H_ */
|