diff options
| -rw-r--r-- | demos/ARM7-AT91SAM7S-FATFS-GCC/Makefile | 192 | ||||
| -rw-r--r-- | demos/ARM7-AT91SAM7S-FATFS-GCC/chconf.h | 535 | ||||
| -rw-r--r-- | demos/ARM7-AT91SAM7S-FATFS-GCC/ffconf.h | 193 | ||||
| -rw-r--r-- | demos/ARM7-AT91SAM7S-FATFS-GCC/halconf.h | 342 | ||||
| -rw-r--r-- | demos/ARM7-AT91SAM7S-FATFS-GCC/main.c | 327 | ||||
| -rw-r--r-- | demos/ARM7-AT91SAM7S-FATFS-GCC/mcuconf.h | 64 | ||||
| -rw-r--r-- | demos/ARM7-AT91SAM7S-FATFS-GCC/readme.txt | 24 | ||||
| -rw-r--r-- | demos/ARM7-AT91SAM7S-GCC/Makefile | 187 | ||||
| -rw-r--r-- | demos/ARM7-AT91SAM7S-GCC/chconf.h | 535 | ||||
| -rw-r--r-- | demos/ARM7-AT91SAM7S-GCC/halconf.h | 342 | ||||
| -rw-r--r-- | demos/ARM7-AT91SAM7S-GCC/main.c | 76 | ||||
| -rw-r--r-- | demos/ARM7-AT91SAM7S-GCC/mcuconf.h | 64 | ||||
| -rw-r--r-- | demos/ARM7-AT91SAM7S-GCC/readme.txt | 28 | ||||
| -rw-r--r-- | demos/ARM7-AT91SAM7X-FATFS-GCC/main.c | 97 | ||||
| -rw-r--r-- | demos/ARM7-LPC214x-FATFS-GCC/Makefile | 4 | ||||
| -rw-r--r-- | demos/ARM7-LPC214x-FATFS-GCC/main.c | 190 | ||||
| -rw-r--r-- | demos/ARMCM3-STM32F103-FATFS/main.c | 2 | ||||
| -rw-r--r-- | demos/ARMCM3-STM32F103ZG-FATFS/main.c | 2 |
18 files changed, 239 insertions, 2965 deletions
diff --git a/demos/ARM7-AT91SAM7S-FATFS-GCC/Makefile b/demos/ARM7-AT91SAM7S-FATFS-GCC/Makefile deleted file mode 100644 index 8c05ca5e6..000000000 --- a/demos/ARM7-AT91SAM7S-FATFS-GCC/Makefile +++ /dev/null @@ -1,192 +0,0 @@ -##############################################################################
-# Build global options
-# NOTE: Can be overridden externally.
-#
-
-# Compiler options here.
-ifeq ($(USE_OPT),)
- USE_OPT = -O2 -ggdb -fomit-frame-pointer -mabi=apcs-gnu
-endif
-
-# C specific options here (added to USE_OPT).
-ifeq ($(USE_COPT),)
- USE_COPT =
-endif
-
-# C++ specific options here (added to USE_OPT).
-ifeq ($(USE_CPPOPT),)
- USE_CPPOPT = -fno-rtti
-endif
-
-# Enable this if you want the linker to remove unused code and data
-ifeq ($(USE_LINK_GC),)
- USE_LINK_GC = yes
-endif
-
-# If enabled, this option allows to compile the application in THUMB mode.
-ifeq ($(USE_THUMB),)
- USE_THUMB = no
-endif
-
-# Enable this if you want to see the full log while compiling.
-ifeq ($(USE_VERBOSE_COMPILE),)
- USE_VERBOSE_COMPILE = no
-endif
-
-#
-# Build global options
-##############################################################################
-
-##############################################################################
-# Project, sources and paths
-#
-
-# Define project name here
-PROJECT = ch
-
-# Imported source files and paths
-CHIBIOS = ../..
-include $(CHIBIOS)/boards/OLIMEX_SAM7_P256/board.mk
-include $(CHIBIOS)/os/hal/platforms/AT91SAM7/platform.mk
-include $(CHIBIOS)/os/hal/hal.mk
-include $(CHIBIOS)/os/ports/GCC/ARM/AT91SAM7/port.mk
-include $(CHIBIOS)/os/kernel/kernel.mk
-include $(CHIBIOS)/os/various/fatfs_bindings/fatfs.mk
-include $(CHIBIOS)/test/test.mk
-
-# Define linker script file here
-LDSCRIPT= $(PORTLD)/AT91SAM7S256.ld
-
-# C sources that can be compiled in ARM or THUMB mode depending on the global
-# setting.
-CSRC = $(PORTSRC) \
- $(KERNSRC) \
- $(HALSRC) \
- $(PLATFORMSRC) \
- $(BOARDSRC) \
- $(FATFSSRC) \
- $(TESTSRC) \
- $(CHIBIOS)/os/various/shell.c \
- $(CHIBIOS)/os/various/chprintf.c \
- main.c
-
-# C++ sources that can be compiled in ARM or THUMB mode depending on the global
-# setting.
-CPPSRC =
-
-# C sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-ACSRC =
-
-# C++ sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-ACPPSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-TCSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-TCPPSRC =
-
-# List ASM source files here
-ASMSRC = $(PORTASM)
-
-INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \
- $(HALINC) $(PLATFORMINC) $(BOARDINC) \
- $(FATFSINC) \
- $(CHIBIOS)/os/various
-
-#
-# Project, sources and paths
-##############################################################################
-
-##############################################################################
-# Compiler settings
-#
-
-MCU = arm7tdmi
-
-#TRGT = arm-elf-
-TRGT = arm-none-eabi-
-CC = $(TRGT)gcc
-CPPC = $(TRGT)g++
-# Enable loading with g++ only if you need C++ runtime support.
-# NOTE: You can use C++ even without C++ support if you are careful. C++
-# runtime support makes code size explode.
-LD = $(TRGT)gcc
-#LD = $(TRGT)g++
-CP = $(TRGT)objcopy
-AS = $(TRGT)gcc -x assembler-with-cpp
-OD = $(TRGT)objdump
-HEX = $(CP) -O ihex
-BIN = $(CP) -O binary
-
-# ARM-specific options here
-AOPT =
-
-# THUMB-specific options here
-TOPT = -mthumb -DTHUMB
-
-# Define C warning options here
-CWARN = -Wall -Wextra -Wstrict-prototypes
-
-# Define C++ warning options here
-CPPWARN = -Wall -Wextra
-
-#
-# Compiler settings
-##############################################################################
-
-##############################################################################
-# Start of default section
-#
-
-# List all default C defines here, like -D_DEBUG=1
-DDEFS = -DSTDOUT_SD=SD1 -DSTDIN_SD=SD1
-
-# List all default ASM defines here, like -D_DEBUG=1
-DADEFS =
-
-# List all default directories to look for include files here
-DINCDIR =
-
-# List the default directory to look for the libraries here
-DLIBDIR =
-
-# List all default libraries here
-DLIBS =
-
-#
-# End of default section
-##############################################################################
-
-##############################################################################
-# Start of user section
-#
-
-# List all user C define here, like -D_DEBUG=1
-UDEFS =
-
-# Define ASM defines here
-UADEFS =
-
-# List all user directories here
-UINCDIR =
-
-# List the user directory to look for the libraries here
-ULIBDIR =
-
-# List all user libraries here
-ULIBS =
-
-#
-# End of user defines
-##############################################################################
-
-include $(CHIBIOS)/os/ports/GCC/ARM/rules.mk
diff --git a/demos/ARM7-AT91SAM7S-FATFS-GCC/chconf.h b/demos/ARM7-AT91SAM7S-FATFS-GCC/chconf.h deleted file mode 100644 index b1f2cd62c..000000000 --- a/demos/ARM7-AT91SAM7S-FATFS-GCC/chconf.h +++ /dev/null @@ -1,535 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
- 2011,2012 Giovanni Di Sirio.
-
- This file is part of ChibiOS/RT.
-
- ChibiOS/RT is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- ChibiOS/RT is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/**
- * @file templates/chconf.h
- * @brief Configuration file template.
- * @details A copy of this file must be placed in each project directory, it
- * contains the application specific kernel settings.
- *
- * @addtogroup config
- * @details Kernel related settings and hooks.
- * @{
- */
-
-#ifndef _CHCONF_H_
-#define _CHCONF_H_
-
-/*===========================================================================*/
-/**
- * @name Kernel parameters and options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief System tick frequency.
- * @details Frequency of the system timer that drives the system ticks. This
- * setting also defines the system tick time unit.
- */
-#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__)
-#define CH_FREQUENCY 1000
-#endif
-
-/**
- * @brief Round robin interval.
- * @details This constant is the number of system ticks allowed for the
- * threads before preemption occurs. Setting this value to zero
- * disables the preemption for threads with equal priority and the
- * round robin becomes cooperative. Note that higher priority
- * threads can still preempt, the kernel is always preemptive.
- *
- * @note Disabling the round robin preemption makes the kernel more compact
- * and generally faster.
- */
-#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__)
-#define CH_TIME_QUANTUM 20
-#endif
-
-/**
- * @brief Managed RAM size.
- * @details Size of the RAM area to be managed by the OS. If set to zero
- * then the whole available RAM is used. The core memory is made
- * available to the heap allocator and/or can be used directly through
- * the simplified core memory allocator.
- *
- * @note In order to let the OS manage the whole RAM the linker script must
- * provide the @p __heap_base__ and @p __heap_end__ symbols.
- * @note Requires @p CH_USE_MEMCORE.
- */
-#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__)
-#define CH_MEMCORE_SIZE 0
-#endif
-
-/**
- * @brief Idle thread automatic spawn suppression.
- * @details When this option is activated the function @p chSysInit()
- * does not spawn the idle thread automatically. The application has
- * then the responsibility to do one of the following:
- * - Spawn a custom idle thread at priority @p IDLEPRIO.
- * - Change the main() thread priority to @p IDLEPRIO then enter
- * an endless loop. In this scenario the @p main() thread acts as
- * the idle thread.
- * .
- * @note Unless an idle thread is spawned the @p main() thread must not
- * enter a sleep state.
- */
-#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__)
-#define CH_NO_IDLE_THREAD FALSE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Performance options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief OS optimization.
- * @details If enabled then time efficient rather than space efficient code
- * is used when two possible implementations exist.
- *
- * @note This is not related to the compiler optimization options.
- * @note The default is @p TRUE.
- */
-#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__)
-#define CH_OPTIMIZE_SPEED TRUE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Subsystem options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Threads registry APIs.
- * @details If enabled then the registry APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__)
-#define CH_USE_REGISTRY TRUE
-#endif
-
-/**
- * @brief Threads synchronization APIs.
- * @details If enabled then the @p chThdWait() function is included in
- * the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__)
-#define CH_USE_WAITEXIT TRUE
-#endif
-
-/**
- * @brief Semaphores APIs.
- * @details If enabled then the Semaphores APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__)
-#define CH_USE_SEMAPHORES TRUE
-#endif
-
-/**
- * @brief Semaphores queuing mode.
- * @details If enabled then the threads are enqueued on semaphores by
- * priority rather than in FIFO order.
- *
- * @note The default is @p FALSE. Enable this if you have special requirements.
- * @note Requires @p CH_USE_SEMAPHORES.
- */
-#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__)
-#define CH_USE_SEMAPHORES_PRIORITY FALSE
-#endif
-
-/**
- * @brief Atomic semaphore API.
- * @details If enabled then the semaphores the @p chSemSignalWait() API
- * is included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_SEMAPHORES.
- */
-#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__)
-#define CH_USE_SEMSW TRUE
-#endif
-
-/**
- * @brief Mutexes APIs.
- * @details If enabled then the mutexes APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__)
-#define CH_USE_MUTEXES TRUE
-#endif
-
-/**
- * @brief Conditional Variables APIs.
- * @details If enabled then the conditional variables APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_MUTEXES.
- */
-#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__)
-#define CH_USE_CONDVARS TRUE
-#endif
-
-/**
- * @brief Conditional Variables APIs with timeout.
- * @details If enabled then the conditional variables APIs with timeout
- * specification are included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_CONDVARS.
- */
-#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__)
-#define CH_USE_CONDVARS_TIMEOUT TRUE
-#endif
-
-/**
- * @brief Events Flags APIs.
- * @details If enabled then the event flags APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__)
-#define CH_USE_EVENTS TRUE
-#endif
-
-/**
- * @brief Events Flags APIs with timeout.
- * @details If enabled then the events APIs with timeout specification
- * are included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_EVENTS.
- */
-#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__)
-#define CH_USE_EVENTS_TIMEOUT TRUE
-#endif
-
-/**
- * @brief Synchronous Messages APIs.
- * @details If enabled then the synchronous messages APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__)
-#define CH_USE_MESSAGES TRUE
-#endif
-
-/**
- * @brief Synchronous Messages queuing mode.
- * @details If enabled then messages are served by priority rather than in
- * FIFO order.
- *
- * @note The default is @p FALSE. Enable this if you have special requirements.
- * @note Requires @p CH_USE_MESSAGES.
- */
-#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__)
-#define CH_USE_MESSAGES_PRIORITY FALSE
-#endif
-
-/**
- * @brief Mailboxes APIs.
- * @details If enabled then the asynchronous messages (mailboxes) APIs are
- * included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_SEMAPHORES.
- */
-#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__)
-#define CH_USE_MAILBOXES TRUE
-#endif
-
-/**
- * @brief I/O Queues APIs.
- * @details If enabled then the I/O queues APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__)
-#define CH_USE_QUEUES TRUE
-#endif
-
-/**
- * @brief Core Memory Manager APIs.
- * @details If enabled then the core memory manager APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__)
-#define CH_USE_MEMCORE TRUE
-#endif
-
-/**
- * @brief Heap Allocator APIs.
- * @details If enabled then the memory heap allocator APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or
- * @p CH_USE_SEMAPHORES.
- * @note Mutexes are recommended.
- */
-#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__)
-#define CH_USE_HEAP TRUE
-#endif
-
-/**
- * @brief C-runtime allocator.
- * @details If enabled the the heap allocator APIs just wrap the C-runtime
- * @p malloc() and @p free() functions.
- *
- * @note The default is @p FALSE.
- * @note Requires @p CH_USE_HEAP.
- * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the
- * appropriate documentation.
- */
-#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__)
-#define CH_USE_MALLOC_HEAP FALSE
-#endif
-
-/**
- * @brief Memory Pools Allocator APIs.
- * @details If enabled then the memory pools allocator APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__)
-#define CH_USE_MEMPOOLS TRUE
-#endif
-
-/**
- * @brief Dynamic Threads APIs.
- * @details If enabled then the dynamic threads creation APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_WAITEXIT.
- * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS.
- */
-#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__)
-#define CH_USE_DYNAMIC TRUE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Debug options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Debug option, system state check.
- * @details If enabled the correct call protocol for system APIs is checked
- * at runtime.
- *
- * @note The default is @p FALSE.
- */
-#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__)
-#define CH_DBG_SYSTEM_STATE_CHECK FALSE
-#endif
-
-/**
- * @brief Debug option, parameters checks.
- * @details If enabled then the checks on the API functions input
- * parameters are activated.
- *
- * @note The default is @p FALSE.
- */
-#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__)
-#define CH_DBG_ENABLE_CHECKS FALSE
-#endif
-
-/**
- * @brief Debug option, consistency checks.
- * @details If enabled then all the assertions in the kernel code are
- * activated. This includes consistency checks inside the kernel,
- * runtime anomalies and port-defined checks.
- *
- * @note The default is @p FALSE.
- */
-#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__)
-#define CH_DBG_ENABLE_ASSERTS FALSE
-#endif
-
-/**
- * @brief Debug option, trace buffer.
- * @details If enabled then the context switch circular trace buffer is
- * activated.
- *
- * @note The default is @p FALSE.
- */
-#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__)
-#define CH_DBG_ENABLE_TRACE FALSE
-#endif
-
-/**
- * @brief Debug option, stack checks.
- * @details If enabled then a runtime stack check is performed.
- *
- * @note The default is @p FALSE.
- * @note The stack check is performed in a architecture/port dependent way.
- * It may not be implemented or some ports.
- * @note The default failure mode is to halt the system with the global
- * @p panic_msg variable set to @p NULL.
- */
-#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__)
-#define CH_DBG_ENABLE_STACK_CHECK FALSE
-#endif
-
-/**
- * @brief Debug option, stacks initialization.
- * @details If enabled then the threads working area is filled with a byte
- * value when a thread is created. This can be useful for the
- * runtime measurement of the used stack.
- *
- * @note The default is @p FALSE.
- */
-#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__)
-#define CH_DBG_FILL_THREADS FALSE
-#endif
-
-/**
- * @brief Debug option, threads profiling.
- * @details If enabled then a field is added to the @p Thread structure that
- * counts the system ticks occurred while executing the thread.
- *
- * @note The default is @p TRUE.
- * @note This debug option is defaulted to TRUE because it is required by
- * some test cases into the test suite.
- */
-#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__)
-#define CH_DBG_THREADS_PROFILING TRUE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel hooks
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Threads descriptor structure extension.
- * @details User fields added to the end of the @p Thread structure.
- */
-#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__)
-#define THREAD_EXT_FIELDS \
- /* Add threads custom fields here.*/
-#endif
-
-/**
- * @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
- *
- * @note It is invoked from within @p chThdInit() and implicitly from all
- * the threads creation APIs.
- */
-#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__)
-#define THREAD_EXT_INIT_HOOK(tp) { \
- /* Add threads initialization code here.*/ \
-}
-#endif
-
-/**
- * @brief Threads finalization hook.
- * @details User finalization code added to the @p chThdExit() API.
- *
- * @note It is inserted into lock zone.
- * @note It is also invoked when the threads simply return in order to
- * terminate.
- */
-#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__)
-#define THREAD_EXT_EXIT_HOOK(tp) { \
- /* Add threads finalization code here.*/ \
-}
-#endif
-
-/**
- * @brief Context switch hook.
- * @details This hook is invoked just before switching between threads.
- */
-#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__)
-#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \
- /* System halt code here.*/ \
-}
-#endif
-
-/**
- * @brief Idle Loop hook.
- * @details This hook is continuously invoked by the idle thread loop.
- */
-#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__)
-#define IDLE_LOOP_HOOK() { \
- /* Idle loop code here.*/ \
-}
-#endif
-
-/**
- * @brief System tick event hook.
- * @details This hook is invoked in the system tick handler immediately
- * after processing the virtual timers queue.
- */
-#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__)
-#define SYSTEM_TICK_EVENT_HOOK() { \
- /* System tick event code here.*/ \
-}
-#endif
-
-/**
- * @brief System halt hook.
- * @details This hook is invoked in case to a system halting error before
- * the system is halted.
- */
-#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__)
-#define SYSTEM_HALT_HOOK() { \
- /* System halt code here.*/ \
-}
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/* Port-specific settings (override port settings defaulted in chcore.h). */
-/*===========================================================================*/
-
-#endif /* _CHCONF_H_ */
-
-/** @} */
diff --git a/demos/ARM7-AT91SAM7S-FATFS-GCC/ffconf.h b/demos/ARM7-AT91SAM7S-FATFS-GCC/ffconf.h deleted file mode 100644 index e6a13cea3..000000000 --- a/demos/ARM7-AT91SAM7S-FATFS-GCC/ffconf.h +++ /dev/null @@ -1,193 +0,0 @@ -/* CHIBIOS FIX */
-#include "ch.h"
-
-/*---------------------------------------------------------------------------/
-/ FatFs - FAT file system module configuration file R0.09 (C)ChaN, 2011
-/----------------------------------------------------------------------------/
-/
-/ CAUTION! Do not forget to make clean the project after any changes to
-/ the configuration options.
-/
-/----------------------------------------------------------------------------*/
-#ifndef _FFCONF
-#define _FFCONF 6502 /* Revision ID */
-
-
-/*---------------------------------------------------------------------------/
-/ Functions and Buffer Configurations
-/----------------------------------------------------------------------------*/
-
-#define _FS_TINY 0 /* 0:Normal or 1:Tiny */
-/* When _FS_TINY is set to 1, FatFs uses the sector buffer in the file system
-/ object instead of the sector buffer in the individual file object for file
-/ data transfer. This reduces memory consumption 512 bytes each file object. */
-
-
-#define _FS_READONLY 0 /* 0:Read/Write or 1:Read only */
-/* Setting _FS_READONLY to 1 defines read only configuration. This removes
-/ writing functions, f_write, f_sync, f_unlink, f_mkdir, f_chmod, f_rename,
-/ f_truncate and useless f_getfree. */
-
-
-#define _FS_MINIMIZE 0 /* 0 to 3 */
-/* The _FS_MINIMIZE option defines minimization level to remove some functions.
-/
-/ 0: Full function.
-/ 1: f_stat, f_getfree, f_unlink, f_mkdir, f_chmod, f_truncate and f_rename
-/ are removed.
-/ 2: f_opendir and f_readdir are removed in addition to 1.
-/ 3: f_lseek is removed in addition to 2. */
-
-
-#define _USE_STRFUNC 0 /* 0:Disable or 1-2:Enable */
-/* To enable string functions, set _USE_STRFUNC to 1 or 2. */
-
-
-#define _USE_MKFS 0 /* 0:Disable or 1:Enable */
-/* To enable f_mkfs function, set _USE_MKFS to 1 and set _FS_READONLY to 0 */
-
-
-#define _USE_FORWARD 0 /* 0:Disable or 1:Enable */
-/* To enable f_forward function, set _USE_FORWARD to 1 and set _FS_TINY to 1. */
-
-
-#define _USE_FASTSEEK 0 /* 0:Disable or 1:Enable */
-/* To enable fast seek feature, set _USE_FASTSEEK to 1. */
-
-
-
-/*---------------------------------------------------------------------------/
-/ Locale and Namespace Configurations
-/----------------------------------------------------------------------------*/
-
-#define _CODE_PAGE 1252
-/* The _CODE_PAGE specifies the OEM code page to be used on the target system.
-/ Incorrect setting of the code page can cause a file open failure.
-/
-/ 932 - Japanese Shift-JIS (DBCS, OEM, Windows)
-/ 936 - Simplified Chinese GBK (DBCS, OEM, Windows)
-/ 949 - Korean (DBCS, OEM, Windows)
-/ 950 - Traditional Chinese Big5 (DBCS, OEM, Windows)
-/ 1250 - Central Europe (Windows)
-/ 1251 - Cyrillic (Windows)
-/ 1252 - Latin 1 (Windows)
-/ 1253 - Greek (Windows)
-/ 1254 - Turkish (Windows)
-/ 1255 - Hebrew (Windows)
-/ 1256 - Arabic (Windows)
-/ 1257 - Baltic (Windows)
-/ 1258 - Vietnam (OEM, Windows)
-/ 437 - U.S. (OEM)
-/ 720 - Arabic (OEM)
-/ 737 - Greek (OEM)
-/ 775 - Baltic (OEM)
-/ 850 - Multilingual Latin 1 (OEM)
-/ 858 - Multilingual Latin 1 + Euro (OEM)
-/ 852 - Latin 2 (OEM)
-/ 855 - Cyrillic (OEM)
-/ 866 - Russian (OEM)
-/ 857 - Turkish (OEM)
-/ 862 - Hebrew (OEM)
-/ 874 - Thai (OEM, Windows)
-/ 1 - ASCII only (Valid for non LFN cfg.)
-*/
-
-
-#define _USE_LFN 3 /* 0 to 3 */
-#define _MAX_LFN 255 /* Maximum LFN length to handle (12 to 255) */
-/* The _USE_LFN option switches the LFN support.
-/
-/ 0: Disable LFN feature. _MAX_LFN and _LFN_UNICODE have no effect.
-/ 1: Enable LFN with static working buffer on the BSS. Always NOT reentrant.
-/ 2: Enable LFN with dynamic working buffer on the STACK.
-/ 3: Enable LFN with dynamic working buffer on the HEAP.
-/
-/ The LFN working buffer occupies (_MAX_LFN + 1) * 2 bytes. To enable LFN,
-/ Unicode handling functions ff_convert() and ff_wtoupper() must be added
-/ to the project. When enable to use heap, memory control functions
-/ ff_memalloc() and ff_memfree() must be added to the project. */
-
-
-#define _LFN_UNICODE 0 /* 0:ANSI/OEM or 1:Unicode */
-/* To switch the character code set on FatFs API to Unicode,
-/ enable LFN feature and set _LFN_UNICODE to 1. */
-
-
-#define _FS_RPATH 0 /* 0 to 2 */
-/* The _FS_RPATH option configures relative path feature.
-/
-/ 0: Disable relative path feature and remove related functions.
-/ 1: Enable relative path. f_chdrive() and f_chdir() are available.
-/ 2: f_getcwd() is available in addition to 1.
-/
-/ Note that output of the f_readdir fnction is affected by this option. */
-
-
-
-/*---------------------------------------------------------------------------/
-/ Physical Drive Configurations
-/----------------------------------------------------------------------------*/
-
-#define _VOLUMES 1
-/* Number of volumes (logical drives) to be used. */
-
-
-#define _MAX_SS 512 /* 512, 1024, 2048 or 4096 */
-/* Maximum sector size to be handled.
-/ Always set 512 for memory card and hard disk but a larger value may be
-/ required for on-board flash memory, floppy disk and optical disk.
-/ When _MAX_SS is larger than 512, it configures FatFs to variable sector size
-/ and GET_SECTOR_SIZE command must be implememted to the disk_ioctl function. */
-
-
-#define _MULTI_PARTITION 0 /* 0:Single partition, 1/2:Enable multiple partition */
-/* When set to 0, each volume is bound to the same physical drive number and
-/ it can mount only first primaly partition. When it is set to 1, each volume
-/ is tied to the partitions listed in VolToPart[]. */
-
-
-#define _USE_ERASE 0 /* 0:Disable or 1:Enable */
-/* To enable sector erase feature, set _USE_ERASE to 1. CTRL_ERASE_SECTOR command
-/ should be added to the disk_ioctl functio. */
-
-
-
-/*---------------------------------------------------------------------------/
-/ System Configurations
-/----------------------------------------------------------------------------*/
-
-#define _WORD_ACCESS 0 /* 0 or 1 */
-/* Set 0 first and it is always compatible with all platforms. The _WORD_ACCESS
-/ option defines which access method is used to the word data on the FAT volume.
-/
-/ 0: Byte-by-byte access.
-/ 1: Word access. Do not choose this unless following condition is met.
-/
-/ When the byte order on the memory is big-endian or address miss-aligned word
-/ access results incorrect behavior, the _WORD_ACCESS must be set to 0.
-/ If it is not the case, the value can also be set to 1 to improve the
-/ performance and code size.
-*/
-
-
-/* A header file that defines sync object types on the O/S, such as
-/ windows.h, ucos_ii.h and semphr.h, must be included prior to ff.h. */
-
-#define _FS_REENTRANT 1 /* 0:Disable or 1:Enable */
-#define _FS_TIMEOUT 1000 /* Timeout period in unit of time ticks */
-#define _SYNC_t Semaphore * /* O/S dependent type of sync object. e.g. HANDLE, OS_EVENT*, ID and etc.. */
-
-/* The _FS_REENTRANT option switches the reentrancy (thread safe) of the FatFs module.
-/
-/ 0: Disable reentrancy. _SYNC_t and _FS_TIMEOUT have no effect.
-/ 1: Enable reentrancy. Also user provided synchronization handlers,
-/ ff_req_grant, ff_rel_grant, ff_del_syncobj and ff_cre_syncobj
-/ function must be added to the project. */
-
-
-#define _FS_SHARE 0 /* 0:Disable or >=1:Enable */
-/* To enable file shareing feature, set _FS_SHARE to 1 or greater. The value
- defines how many files can be opened simultaneously. */
-
-
-#endif /* _FFCONFIG */
diff --git a/demos/ARM7-AT91SAM7S-FATFS-GCC/halconf.h b/demos/ARM7-AT91SAM7S-FATFS-GCC/halconf.h deleted file mode 100644 index fe761053d..000000000 --- a/demos/ARM7-AT91SAM7S-FATFS-GCC/halconf.h +++ /dev/null @@ -1,342 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
- 2011,2012 Giovanni Di Sirio.
-
- This file is part of ChibiOS/RT.
-
- ChibiOS/RT is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- ChibiOS/RT is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/**
- * @file templates/halconf.h
- * @brief HAL configuration header.
- * @details HAL configuration file, this file allows to enable or disable the
- * various device drivers from your application. You may also use
- * this file in order to override the device drivers default settings.
- *
- * @addtogroup HAL_CONF
- * @{
- */
-
-#ifndef _HALCONF_H_
-#define _HALCONF_H_
-
-#include "mcuconf.h"
-
-/**
- * @brief Enables the TM subsystem.
- */
-#if !defined(HAL_USE_TM) || defined(__DOXYGEN__)
-#define HAL_USE_TM FALSE
-#endif
-
-/**
- * @brief Enables the PAL subsystem.
- */
-#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
-#define HAL_USE_PAL TRUE
-#endif
-
-/**
- * @brief Enables the ADC subsystem.
- */
-#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
-#define HAL_USE_ADC FALSE
-#endif
-
-/**
- * @brief Enables the CAN subsystem.
- */
-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
-#define HAL_USE_CAN FALSE
-#endif
-
-/**
- * @brief Enables the EXT subsystem.
- */
-#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
-#define HAL_USE_EXT FALSE
-#endif
-
-/**
- * @brief Enables the GPT subsystem.
- */
-#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT FALSE
-#endif
-
-/**
- * @brief Enables the I2C subsystem.
- */
-#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C FALSE
-#endif
-
-/**
- * @brief Enables the ICU subsystem.
- */
-#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
-#define HAL_USE_ICU FALSE
-#endif
-
-/**
- * @brief Enables the MAC subsystem.
- */
-#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
-#define HAL_USE_MAC FALSE
-#endif
-
-/**
- * @brief Enables the MMC_SPI subsystem.
- */
-#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_MMC_SPI TRUE
-#endif
-
-/**
- * @brief Enables the PWM subsystem.
- */
-#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM FALSE
-#endif
-
-/**
- * @brief Enables the RTC subsystem.
- */
-#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
-#define HAL_USE_RTC FALSE
-#endif
-
-/**
- * @brief Enables the SDC subsystem.
- */
-#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
-#define HAL_USE_SDC FALSE
-#endif
-
-/**
- * @brief Enables the SERIAL subsystem.
- */
-#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL TRUE
-#endif
-
-/**
- * @brief Enables the SERIAL over USB subsystem.
- */
-#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL_USB FALSE
-#endif
-
-/**
- * @brief Enables the SPI subsystem.
- */
-#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_SPI TRUE
-#endif
-
-/**
- * @brief Enables the UART subsystem.
- */
-#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
-#define HAL_USE_UART FALSE
-#endif
-
-/**
- * @brief Enables the USB subsystem.
- */
-#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
-#define HAL_USE_USB FALSE
-#endif
-
-/*===========================================================================*/
-/* ADC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
-#define ADC_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define ADC_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* CAN driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Sleep mode related APIs inclusion switch.
- */
-#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
-#define CAN_USE_SLEEP_MODE TRUE
-#endif
-
-/*===========================================================================*/
-/* I2C driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables the mutual exclusion APIs on the I2C bus.
- */
-#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define I2C_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* MAC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
-#define MAC_USE_EVENTS TRUE
-#endif
-
-/*===========================================================================*/
-/* MMC_SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Block size for MMC transfers.
- */
-#if !defined(MMC_SECTOR_SIZE) || defined(__DOXYGEN__)
-#define MMC_SECTOR_SIZE 512
-#endif
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- * This option is recommended also if the SPI driver does not
- * use a DMA channel and heavily loads the CPU.
- */
-#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
-#define MMC_NICE_WAITING TRUE
-#endif
-
-/**
- * @brief Number of positive insertion queries before generating the
- * insertion event.
- */
-#if !defined(MMC_POLLING_INTERVAL) || defined(__DOXYGEN__)
-#define MMC_POLLING_INTERVAL 10
-#endif
-
-/**
- * @brief Interval, in milliseconds, between insertion queries.
- */
-#if !defined(MMC_POLLING_DELAY) || defined(__DOXYGEN__)
-#define MMC_POLLING_DELAY 10
-#endif
-
-/**
- * @brief Uses the SPI polled API for small data transfers.
- * @details Polled transfers usually improve performance because it
- * saves two context switches and interrupt servicing. Note
- * that this option has no effect on large transfers which
- * are always performed using DMAs/IRQs.
- */
-#if !defined(MMC_USE_SPI_POLLING) || defined(__DOXYGEN__)
-#define MMC_USE_SPI_POLLING TRUE
-#endif
-
-/*===========================================================================*/
-/* SDC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Number of initialization attempts before rejecting the card.
- * @note Attempts are performed at 10mS intervals.
- */
-#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
-#define SDC_INIT_RETRY 100
-#endif
-
-/**
- * @brief Include support for MMC cards.
- * @note MMC support is not yet implemented so this option must be kept
- * at @p FALSE.
- */
-#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
-#define SDC_MMC_SUPPORT FALSE
-#endif
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- */
-#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
-#define SDC_NICE_WAITING TRUE
-#endif
-
-/*===========================================================================*/
-/* SERIAL driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Default bit rate.
- * @details Configuration parameter, this is the baud rate selected for the
- * default configuration.
- */
-#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
-#define SERIAL_DEFAULT_BITRATE 38400
-#endif
-
-/**
- * @brief Serial buffers size.
- * @details Configuration parameter, you can change the depth of the queue
- * buffers depending on the requirements of your application.
- * @note The default is 64 bytes for both the transmission and receive
- * buffers.
- */
-#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_BUFFERS_SIZE 16
-#endif
-
-/*===========================================================================*/
-/* SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
-#define SPI_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define SPI_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-#endif /* _HALCONF_H_ */
-
-/** @} */
diff --git a/demos/ARM7-AT91SAM7S-FATFS-GCC/main.c b/demos/ARM7-AT91SAM7S-FATFS-GCC/main.c deleted file mode 100644 index fea6e72b9..000000000 --- a/demos/ARM7-AT91SAM7S-FATFS-GCC/main.c +++ /dev/null @@ -1,327 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
- 2011,2012 Giovanni Di Sirio.
-
- This file is part of ChibiOS/RT.
-
- ChibiOS/RT is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- ChibiOS/RT is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <stdio.h>
-#include <string.h>
-
-#include "ch.h"
-#include "hal.h"
-#include "test.h"
-#include "shell.h"
-#include "chprintf.h"
-#include "evtimer.h"
-#include "ff.h"
-
-#define MAX_SPI_BITRATE 100
-#define MIN_SPI_BITRATE 250
-
-/**
- * @brief FS object.
- */
-FATFS MMC_FS;
-
-/**
- * MMC driver instance.
- */
-MMCDriver MMCD1;
-
-/* FS mounted and ready.*/
-static bool_t fs_ready = FALSE;
-
-/* Maximum speed SPI configuration (__MHz, NCPHA=1, CPOL=0).*/
-static SPIConfig hs_spicfg = {
- NULL,
- IOPORT1,
- PIOA_MMC_NPCS0,
- (MAX_SPI_BITRATE << 8) | AT91C_SPI_NCPHA | AT91C_SPI_BITS_8
-};
-
-/* Low speed SPI configuration (192kHz, NCPHA=1, CPOL=0).*/
-static SPIConfig ls_spicfg = {
- NULL,
- IOPORT1,
- PIOA_MMC_NPCS0,
- (MIN_SPI_BITRATE << 8) | AT91C_SPI_NCPHA | AT91C_SPI_BITS_8
-};
-
-/* MMC/SD over SPI driver configuration.*/
-static MMCConfig mmccfg = {&SPID1, &ls_spicfg, &hs_spicfg};
-
-/* Generic large buffer.*/
-uint8_t fbuff[1024];
-
-static FRESULT scan_files(BaseSequentialStream *chp, char *path) {
- FRESULT res;
- FILINFO fno;
- DIR dir;
- int i;
- char *fn;
-
- res = f_opendir(&dir, path);
- if (res == FR_OK) {
- i = strlen(path);
- for (;;) {
- res = f_readdir(&dir, &fno);
- if (res != FR_OK || fno.fname[0] == 0)
- break;
- if (fno.fname[0] == '.')
- continue;
- fn = fno.fname;
- if (fno.fattrib & AM_DIR) {
- path[i++] = '/';
- strcpy(&path[i], fn);
- res = scan_files(chp, path);
- if (res != FR_OK)
- break;
- path[i] = 0;
- }
- else {
- chprintf(chp, "%s/%s\r\n", path, fn);
- }
- }
- }
- return res;
-}
-
-/*===========================================================================*/
-/* Command line related. */
-/*===========================================================================*/
-
-#define SHELL_WA_SIZE THD_WA_SIZE(1024)
-#define TEST_WA_SIZE THD_WA_SIZE(256)
-
-static void cmd_mem(BaseSequentialStream *chp, int argc, char *argv[]) {
- size_t n, size;
-
- (void)argv;
- if (argc > 0) {
- chprintf(chp, "Usage: mem\r\n");
- return;
- }
- n = chHeapStatus(NULL, &size);
- chprintf(chp, "core free memory : %u bytes\r\n", chCoreStatus());
- chprintf(chp, "heap fragments : %u\r\n", n);
- chprintf(chp, "heap free total : %u bytes\r\n", size);
-}
-
-static void cmd_threads(BaseSequentialStream *chp, int argc, char *argv[]) {
- static const char *states[] = {THD_STATE_NAMES};
- Thread *tp;
-
- (void)argv;
- if (argc > 0) {
- chprintf(chp, "Usage: threads\r\n");
- return;
- }
- chprintf(chp, " addr stack prio refs state time\r\n");
- tp = chRegFirstThread();
- do {
- chprintf(chp, "%.8lx %.8lx %4lu %4lu %9s %lu\r\n",
- (uint32_t)tp, (uint32_t)tp->p_ctx.r13,
- (uint32_t)tp->p_prio, (uint32_t)(tp->p_refs - 1),
- states[tp->p_state], (uint32_t)tp->p_time);
- tp = chRegNextThread(tp);
- } while (tp != NULL);
-}
-
-static void cmd_test(BaseSequentialStream *chp, int argc, char *argv[]) {
- Thread *tp;
-
- (void)argv;
- if (argc > 0) {
- chprintf(chp, "Usage: test\r\n");
- return;
- }
- tp = chThdCreateFromHeap(NULL, TEST_WA_SIZE, chThdGetPriority(),
- TestThread, chp);
- if (tp == NULL) {
- chprintf(chp, "out of memory\r\n");
- return;
- }
- chThdWait(tp);
-}
-
-static void cmd_tree(BaseSequentialStream *chp, int argc, char *argv[]) {
- FRESULT err;
- uint32_t clusters;
- FATFS *fsp;
-
- (void)argv;
- if (argc > 0) {
- chprintf(chp, "Usage: tree\r\n");
- return;
- }
- if (!fs_ready) {
- chprintf(chp, "File System not mounted\r\n");
- return;
- }
- err = f_getfree("/", &clusters, &fsp);
- if (err != FR_OK) {
- chprintf(chp, "FS: f_getfree() failed\r\n");
- return;
- }
- chprintf(chp,
- "FS: %lu free clusters, %lu sectors per cluster, %lu bytes free\r\n",
- clusters, (uint32_t)MMC_FS.csize,
- clusters * (uint32_t)MMC_FS.csize * (uint32_t)MMC_SECTOR_SIZE);
- fbuff[0] = 0;
- scan_files(chp, (char *)fbuff);
-}
-
-static const ShellCommand commands[] = {
- {"mem", cmd_mem},
- {"threads", cmd_threads},
- {"test", cmd_test},
- {"tree", cmd_tree},
- {NULL, NULL}
-};
-
-static const ShellConfig shell_cfg1 = {
- (BaseSequentialStream *)&SD1,
- commands
-};
-
-/*
- * LED1 blinker thread, times are in milliseconds.
- */
-static WORKING_AREA(waThread1, 128);
-static msg_t Thread1(void *arg) {
-
- (void)arg;
- chRegSetThreadName("blinker1");
- while (TRUE) {
- palTogglePad(IOPORT1, PIOA_LED1);
- if (fs_ready)
- chThdSleepMilliseconds(200);
- else
- chThdSleepMilliseconds(500);
- }
- return 0;
-}
-
-/*
- * LED2 blinker thread, times are in milliseconds.
- */
-static WORKING_AREA(waThread2, 64);
-static msg_t Thread2(void *p) {
-
- (void)p;
- chRegSetThreadName("blinker2");
- while (TRUE) {
- palSetPad(IOPORT1, PIOA_LED2);
- chThdSleepMilliseconds(100);
- palClearPad(IOPORT1, PIOA_LED2);
- chThdSleepMilliseconds(900);
- }
- return 0;
-}
-
-/*
- * MMC card insertion event.
- */
-static void InsertHandler(eventid_t id) {
- FRESULT err;
-
- (void)id;
- /*
- * On insertion MMC initialization and FS mount.
- */
- if (mmcConnect(&MMCD1)) {
- return;
- }
- err = f_mount(0, &MMC_FS);
- if (err != FR_OK) {
- mmcDisconnect(&MMCD1);
- return;
- }
- fs_ready = TRUE;
-}
-
-/*
- * MMC card removal event.
- */
-static void RemoveHandler(eventid_t id) {
-
- (void)id;
- fs_ready = FALSE;
-}
-
-/*
- * Application entry point.
- */
-int main(void) {
- static const evhandler_t evhndl[] = {
- InsertHandler,
- RemoveHandler
- };
- Thread *shelltp = NULL;
- struct EventListener el0, el1;
-
- /*
- * System initializations.
- * - HAL initialization, this also initializes the configured device drivers
- * and performs the board-specific initializations.
- * - Kernel initialization, the main() function becomes a thread and the
- * RTOS is active.
- */
- halInit();
- chSysInit();
-
- /*
- * Activates the serial driver 1 using the driver default configuration.
- */
- sdStart(&SD1, NULL);
-
- /*
- * Shell manager initialization.
- */
- shellInit();
-
- /*
- * Initializes the MMC driver to work with SPI.
- */
- palSetPadMode(IOPORT1, PIOA_MMC_NPCS0, PAL_MODE_OUTPUT_PUSHPULL);
- palSetPad(IOPORT1, PIOA_MMC_NPCS0);
- mmcObjectInit(&MMCD1);
- mmcStart(&MMCD1, &mmccfg);
-
- /*
- * Creates the blinker threads.
- */
- chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
- chThdCreateStatic(waThread2, sizeof(waThread2), NORMALPRIO, Thread2, NULL);
-
- /*
- * Normal main() thread activity, in this demo it does nothing except
- * sleeping in a loop and listen for events.
- */
- chEvtRegister(&MMCD1.inserted_event, &el0, 0);
- chEvtRegister(&MMCD1.removed_event, &el1, 1);
- while (TRUE) {
- if (!shelltp)
- shelltp = shellCreate(&shell_cfg1, SHELL_WA_SIZE, NORMALPRIO);
- else if (chThdTerminated(shelltp)) {
- chThdRelease(shelltp); /* Recovers memory of the previous shell. */
- shelltp = NULL; /* Triggers spawning of a new shell. */
- }
- chEvtDispatch(evhndl, chEvtWaitOne(ALL_EVENTS));
- }
- return 0;
-}
diff --git a/demos/ARM7-AT91SAM7S-FATFS-GCC/mcuconf.h b/demos/ARM7-AT91SAM7S-FATFS-GCC/mcuconf.h deleted file mode 100644 index 5e6b0b88f..000000000 --- a/demos/ARM7-AT91SAM7S-FATFS-GCC/mcuconf.h +++ /dev/null @@ -1,64 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
- 2011,2012 Giovanni Di Sirio.
-
- This file is part of ChibiOS/RT.
-
- ChibiOS/RT is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- ChibiOS/RT is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/*
- * AT91SAM7 drivers configuration.
- * The following settings override the default settings present in
- * the various device driver implementation headers.
- * Note that the settings for each driver only have effect if the driver
- * is enabled in halconf.h.
- */
-
-/*
- * ADC driver system settings.
- */
-
-/*
- * CAN driver system settings.
- */
-
-/*
- * MAC driver system settings.
- */
-#define MAC_TRANSMIT_BUFFERS 2
-#define MAC_RECEIVE_BUFFERS 2
-#define MAC_BUFFERS_SIZE 1518
-#define EMAC_INTERRUPT_PRIORITY (AT91C_AIC_PRIOR_HIGHEST - 3)
-
-/*
- * PWM driver system settings.
- */
-
-/*
- * SERIAL driver system settings.
- */
-#define USE_SAM7_USART0 TRUE
-#define USE_SAM7_USART1 TRUE
-#define SAM7_USART0_PRIORITY (AT91C_AIC_PRIOR_HIGHEST - 2)
-#define SAM7_USART1_PRIORITY (AT91C_AIC_PRIOR_HIGHEST - 2)
-
-/*
- * SPI driver system settings.
- */
-#define USE_AT91SAM7_SPI TRUE
-#define AT91SAM7_SPI_USE_SPI0 TRUE
-#define AT91SAM7_SPI_USE_SPI1 FALSE
-#define AT91SAM7_SPI0_PRIORITY (AT91C_AIC_PRIOR_HIGHEST - 1)
-#define AT91SAM7_SPI1_PRIORITY (AT91C_AIC_PRIOR_HIGHEST - 1)
diff --git a/demos/ARM7-AT91SAM7S-FATFS-GCC/readme.txt b/demos/ARM7-AT91SAM7S-FATFS-GCC/readme.txt deleted file mode 100644 index cc9659d8e..000000000 --- a/demos/ARM7-AT91SAM7S-FATFS-GCC/readme.txt +++ /dev/null @@ -1,24 +0,0 @@ -*****************************************************************************
-** ChibiOS/RT + FatFS demo for SAM7. **
-*****************************************************************************
-
-** TARGET **
-
-The demo runs on an Olimex SAM-P256 board. The port on other boards or other
-members of the SAM7 family should be an easy task.
-
-** The Demo **
-
-This demo shows how to integrate the FatFs file system and use the SPI and MMC
-drivers.
-The demo flashes the board LEDs using two threads and monitors the MMC slot for
-a card insertion. When a card is inserted then the file system is mounted
-and the LED1 flashes faster.
-A command line shell is spawned on SD1, all the interaction with the demo is
-performed using the command shell, type "help" for a list of the available
-commands.
-
-** Build Procedure **
-
-The demo was built using the YAGARTO toolchain but any toolchain based on GCC
-and GNU userspace programs will work.
diff --git a/demos/ARM7-AT91SAM7S-GCC/Makefile b/demos/ARM7-AT91SAM7S-GCC/Makefile deleted file mode 100644 index 6c93f9d39..000000000 --- a/demos/ARM7-AT91SAM7S-GCC/Makefile +++ /dev/null @@ -1,187 +0,0 @@ -##############################################################################
-# Build global options
-# NOTE: Can be overridden externally.
-#
-
-# Compiler options here.
-ifeq ($(USE_OPT),)
- USE_OPT = -O2 -ggdb -fomit-frame-pointer -mabi=apcs-gnu
-endif
-
-# C specific options here (added to USE_OPT).
-ifeq ($(USE_COPT),)
- USE_COPT =
-endif
-
-# C++ specific options here (added to USE_OPT).
-ifeq ($(USE_CPPOPT),)
- USE_CPPOPT = -fno-rtti
-endif
-
-# Enable this if you want the linker to remove unused code and data
-ifeq ($(USE_LINK_GC),)
- USE_LINK_GC = yes
-endif
-
-# If enabled, this option allows to compile the application in THUMB mode.
-ifeq ($(USE_THUMB),)
- USE_THUMB = no
-endif
-
-# Enable this if you want to see the full log while compiling.
-ifeq ($(USE_VERBOSE_COMPILE),)
- USE_VERBOSE_COMPILE = no
-endif
-
-#
-# Build global options
-##############################################################################
-
-##############################################################################
-# Project, sources and paths
-#
-
-# Define project name here
-PROJECT = ch
-
-# Imported source files and paths
-CHIBIOS = ../..
-include $(CHIBIOS)/boards/OLIMEX_SAM7_P256/board.mk
-include $(CHIBIOS)/os/hal/platforms/AT91SAM7/platform.mk
-include $(CHIBIOS)/os/hal/hal.mk
-include $(CHIBIOS)/os/ports/GCC/ARM/AT91SAM7/port.mk
-include $(CHIBIOS)/os/kernel/kernel.mk
-include $(CHIBIOS)/test/test.mk
-
-# Define linker script file here
-LDSCRIPT= $(PORTLD)/AT91SAM7S256.ld
-
-# C sources that can be compiled in ARM or THUMB mode depending on the global
-# setting.
-CSRC = $(PORTSRC) \
- $(KERNSRC) \
- $(TESTSRC) \
- $(HALSRC) \
- $(PLATFORMSRC) \
- $(BOARDSRC) \
- main.c
-
-# C++ sources that can be compiled in ARM or THUMB mode depending on the global
-# setting.
-CPPSRC =
-
-# C sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-ACSRC =
-
-# C++ sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-ACPPSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-TCSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-TCPPSRC =
-
-# List ASM source files here
-ASMSRC = $(PORTASM)
-
-INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \
- $(HALINC) $(PLATFORMINC) $(BOARDINC) \
- $(CHIBIOS)/os/various
-
-#
-# Project, sources and paths
-##############################################################################
-
-##############################################################################
-# Compiler settings
-#
-
-MCU = arm7tdmi
-
-#TRGT = arm-elf-
-TRGT = arm-none-eabi-
-CC = $(TRGT)gcc
-CPPC = $(TRGT)g++
-# Enable loading with g++ only if you need C++ runtime support.
-# NOTE: You can use C++ even without C++ support if you are careful. C++
-# runtime support makes code size explode.
-LD = $(TRGT)gcc
-#LD = $(TRGT)g++
-CP = $(TRGT)objcopy
-AS = $(TRGT)gcc -x assembler-with-cpp
-OD = $(TRGT)objdump
-HEX = $(CP) -O ihex
-BIN = $(CP) -O binary
-
-# ARM-specific options here
-AOPT =
-
-# THUMB-specific options here
-TOPT = -mthumb -DTHUMB
-
-# Define C warning options here
-CWARN = -Wall -Wextra -Wstrict-prototypes
-
-# Define C++ warning options here
-CPPWARN = -Wall -Wextra
-
-#
-# Compiler settings
-##############################################################################
-
-##############################################################################
-# Start of default section
-#
-
-# List all default C defines here, like -D_DEBUG=1
-DDEFS =
-
-# List all default ASM defines here, like -D_DEBUG=1
-DADEFS =
-
-# List all default directories to look for include files here
-DINCDIR =
-
-# List the default directory to look for the libraries here
-DLIBDIR =
-
-# List all default libraries here
-DLIBS =
-
-#
-# End of default section
-##############################################################################
-
-##############################################################################
-# Start of user section
-#
-
-# List all user C define here, like -D_DEBUG=1
-UDEFS =
-
-# Define ASM defines here
-UADEFS =
-
-# List all user directories here
-UINCDIR =
-
-# List the user directory to look for the libraries here
-ULIBDIR =
-
-# List all user libraries here
-ULIBS =
-
-#
-# End of user defines
-##############################################################################
-
-include $(CHIBIOS)/os/ports/GCC/ARM/rules.mk
diff --git a/demos/ARM7-AT91SAM7S-GCC/chconf.h b/demos/ARM7-AT91SAM7S-GCC/chconf.h deleted file mode 100644 index b1f2cd62c..000000000 --- a/demos/ARM7-AT91SAM7S-GCC/chconf.h +++ /dev/null @@ -1,535 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
- 2011,2012 Giovanni Di Sirio.
-
- This file is part of ChibiOS/RT.
-
- ChibiOS/RT is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- ChibiOS/RT is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/**
- * @file templates/chconf.h
- * @brief Configuration file template.
- * @details A copy of this file must be placed in each project directory, it
- * contains the application specific kernel settings.
- *
- * @addtogroup config
- * @details Kernel related settings and hooks.
- * @{
- */
-
-#ifndef _CHCONF_H_
-#define _CHCONF_H_
-
-/*===========================================================================*/
-/**
- * @name Kernel parameters and options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief System tick frequency.
- * @details Frequency of the system timer that drives the system ticks. This
- * setting also defines the system tick time unit.
- */
-#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__)
-#define CH_FREQUENCY 1000
-#endif
-
-/**
- * @brief Round robin interval.
- * @details This constant is the number of system ticks allowed for the
- * threads before preemption occurs. Setting this value to zero
- * disables the preemption for threads with equal priority and the
- * round robin becomes cooperative. Note that higher priority
- * threads can still preempt, the kernel is always preemptive.
- *
- * @note Disabling the round robin preemption makes the kernel more compact
- * and generally faster.
- */
-#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__)
-#define CH_TIME_QUANTUM 20
-#endif
-
-/**
- * @brief Managed RAM size.
- * @details Size of the RAM area to be managed by the OS. If set to zero
- * then the whole available RAM is used. The core memory is made
- * available to the heap allocator and/or can be used directly through
- * the simplified core memory allocator.
- *
- * @note In order to let the OS manage the whole RAM the linker script must
- * provide the @p __heap_base__ and @p __heap_end__ symbols.
- * @note Requires @p CH_USE_MEMCORE.
- */
-#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__)
-#define CH_MEMCORE_SIZE 0
-#endif
-
-/**
- * @brief Idle thread automatic spawn suppression.
- * @details When this option is activated the function @p chSysInit()
- * does not spawn the idle thread automatically. The application has
- * then the responsibility to do one of the following:
- * - Spawn a custom idle thread at priority @p IDLEPRIO.
- * - Change the main() thread priority to @p IDLEPRIO then enter
- * an endless loop. In this scenario the @p main() thread acts as
- * the idle thread.
- * .
- * @note Unless an idle thread is spawned the @p main() thread must not
- * enter a sleep state.
- */
-#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__)
-#define CH_NO_IDLE_THREAD FALSE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Performance options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief OS optimization.
- * @details If enabled then time efficient rather than space efficient code
- * is used when two possible implementations exist.
- *
- * @note This is not related to the compiler optimization options.
- * @note The default is @p TRUE.
- */
-#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__)
-#define CH_OPTIMIZE_SPEED TRUE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Subsystem options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Threads registry APIs.
- * @details If enabled then the registry APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__)
-#define CH_USE_REGISTRY TRUE
-#endif
-
-/**
- * @brief Threads synchronization APIs.
- * @details If enabled then the @p chThdWait() function is included in
- * the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__)
-#define CH_USE_WAITEXIT TRUE
-#endif
-
-/**
- * @brief Semaphores APIs.
- * @details If enabled then the Semaphores APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__)
-#define CH_USE_SEMAPHORES TRUE
-#endif
-
-/**
- * @brief Semaphores queuing mode.
- * @details If enabled then the threads are enqueued on semaphores by
- * priority rather than in FIFO order.
- *
- * @note The default is @p FALSE. Enable this if you have special requirements.
- * @note Requires @p CH_USE_SEMAPHORES.
- */
-#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__)
-#define CH_USE_SEMAPHORES_PRIORITY FALSE
-#endif
-
-/**
- * @brief Atomic semaphore API.
- * @details If enabled then the semaphores the @p chSemSignalWait() API
- * is included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_SEMAPHORES.
- */
-#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__)
-#define CH_USE_SEMSW TRUE
-#endif
-
-/**
- * @brief Mutexes APIs.
- * @details If enabled then the mutexes APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__)
-#define CH_USE_MUTEXES TRUE
-#endif
-
-/**
- * @brief Conditional Variables APIs.
- * @details If enabled then the conditional variables APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_MUTEXES.
- */
-#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__)
-#define CH_USE_CONDVARS TRUE
-#endif
-
-/**
- * @brief Conditional Variables APIs with timeout.
- * @details If enabled then the conditional variables APIs with timeout
- * specification are included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_CONDVARS.
- */
-#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__)
-#define CH_USE_CONDVARS_TIMEOUT TRUE
-#endif
-
-/**
- * @brief Events Flags APIs.
- * @details If enabled then the event flags APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__)
-#define CH_USE_EVENTS TRUE
-#endif
-
-/**
- * @brief Events Flags APIs with timeout.
- * @details If enabled then the events APIs with timeout specification
- * are included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_EVENTS.
- */
-#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__)
-#define CH_USE_EVENTS_TIMEOUT TRUE
-#endif
-
-/**
- * @brief Synchronous Messages APIs.
- * @details If enabled then the synchronous messages APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__)
-#define CH_USE_MESSAGES TRUE
-#endif
-
-/**
- * @brief Synchronous Messages queuing mode.
- * @details If enabled then messages are served by priority rather than in
- * FIFO order.
- *
- * @note The default is @p FALSE. Enable this if you have special requirements.
- * @note Requires @p CH_USE_MESSAGES.
- */
-#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__)
-#define CH_USE_MESSAGES_PRIORITY FALSE
-#endif
-
-/**
- * @brief Mailboxes APIs.
- * @details If enabled then the asynchronous messages (mailboxes) APIs are
- * included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_SEMAPHORES.
- */
-#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__)
-#define CH_USE_MAILBOXES TRUE
-#endif
-
-/**
- * @brief I/O Queues APIs.
- * @details If enabled then the I/O queues APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__)
-#define CH_USE_QUEUES TRUE
-#endif
-
-/**
- * @brief Core Memory Manager APIs.
- * @details If enabled then the core memory manager APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__)
-#define CH_USE_MEMCORE TRUE
-#endif
-
-/**
- * @brief Heap Allocator APIs.
- * @details If enabled then the memory heap allocator APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or
- * @p CH_USE_SEMAPHORES.
- * @note Mutexes are recommended.
- */
-#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__)
-#define CH_USE_HEAP TRUE
-#endif
-
-/**
- * @brief C-runtime allocator.
- * @details If enabled the the heap allocator APIs just wrap the C-runtime
- * @p malloc() and @p free() functions.
- *
- * @note The default is @p FALSE.
- * @note Requires @p CH_USE_HEAP.
- * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the
- * appropriate documentation.
- */
-#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__)
-#define CH_USE_MALLOC_HEAP FALSE
-#endif
-
-/**
- * @brief Memory Pools Allocator APIs.
- * @details If enabled then the memory pools allocator APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__)
-#define CH_USE_MEMPOOLS TRUE
-#endif
-
-/**
- * @brief Dynamic Threads APIs.
- * @details If enabled then the dynamic threads creation APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_WAITEXIT.
- * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS.
- */
-#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__)
-#define CH_USE_DYNAMIC TRUE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Debug options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Debug option, system state check.
- * @details If enabled the correct call protocol for system APIs is checked
- * at runtime.
- *
- * @note The default is @p FALSE.
- */
-#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__)
-#define CH_DBG_SYSTEM_STATE_CHECK FALSE
-#endif
-
-/**
- * @brief Debug option, parameters checks.
- * @details If enabled then the checks on the API functions input
- * parameters are activated.
- *
- * @note The default is @p FALSE.
- */
-#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__)
-#define CH_DBG_ENABLE_CHECKS FALSE
-#endif
-
-/**
- * @brief Debug option, consistency checks.
- * @details If enabled then all the assertions in the kernel code are
- * activated. This includes consistency checks inside the kernel,
- * runtime anomalies and port-defined checks.
- *
- * @note The default is @p FALSE.
- */
-#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__)
-#define CH_DBG_ENABLE_ASSERTS FALSE
-#endif
-
-/**
- * @brief Debug option, trace buffer.
- * @details If enabled then the context switch circular trace buffer is
- * activated.
- *
- * @note The default is @p FALSE.
- */
-#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__)
-#define CH_DBG_ENABLE_TRACE FALSE
-#endif
-
-/**
- * @brief Debug option, stack checks.
- * @details If enabled then a runtime stack check is performed.
- *
- * @note The default is @p FALSE.
- * @note The stack check is performed in a architecture/port dependent way.
- * It may not be implemented or some ports.
- * @note The default failure mode is to halt the system with the global
- * @p panic_msg variable set to @p NULL.
- */
-#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__)
-#define CH_DBG_ENABLE_STACK_CHECK FALSE
-#endif
-
-/**
- * @brief Debug option, stacks initialization.
- * @details If enabled then the threads working area is filled with a byte
- * value when a thread is created. This can be useful for the
- * runtime measurement of the used stack.
- *
- * @note The default is @p FALSE.
- */
-#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__)
-#define CH_DBG_FILL_THREADS FALSE
-#endif
-
-/**
- * @brief Debug option, threads profiling.
- * @details If enabled then a field is added to the @p Thread structure that
- * counts the system ticks occurred while executing the thread.
- *
- * @note The default is @p TRUE.
- * @note This debug option is defaulted to TRUE because it is required by
- * some test cases into the test suite.
- */
-#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__)
-#define CH_DBG_THREADS_PROFILING TRUE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel hooks
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Threads descriptor structure extension.
- * @details User fields added to the end of the @p Thread structure.
- */
-#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__)
-#define THREAD_EXT_FIELDS \
- /* Add threads custom fields here.*/
-#endif
-
-/**
- * @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
- *
- * @note It is invoked from within @p chThdInit() and implicitly from all
- * the threads creation APIs.
- */
-#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__)
-#define THREAD_EXT_INIT_HOOK(tp) { \
- /* Add threads initialization code here.*/ \
-}
-#endif
-
-/**
- * @brief Threads finalization hook.
- * @details User finalization code added to the @p chThdExit() API.
- *
- * @note It is inserted into lock zone.
- * @note It is also invoked when the threads simply return in order to
- * terminate.
- */
-#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__)
-#define THREAD_EXT_EXIT_HOOK(tp) { \
- /* Add threads finalization code here.*/ \
-}
-#endif
-
-/**
- * @brief Context switch hook.
- * @details This hook is invoked just before switching between threads.
- */
-#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__)
-#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \
- /* System halt code here.*/ \
-}
-#endif
-
-/**
- * @brief Idle Loop hook.
- * @details This hook is continuously invoked by the idle thread loop.
- */
-#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__)
-#define IDLE_LOOP_HOOK() { \
- /* Idle loop code here.*/ \
-}
-#endif
-
-/**
- * @brief System tick event hook.
- * @details This hook is invoked in the system tick handler immediately
- * after processing the virtual timers queue.
- */
-#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__)
-#define SYSTEM_TICK_EVENT_HOOK() { \
- /* System tick event code here.*/ \
-}
-#endif
-
-/**
- * @brief System halt hook.
- * @details This hook is invoked in case to a system halting error before
- * the system is halted.
- */
-#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__)
-#define SYSTEM_HALT_HOOK() { \
- /* System halt code here.*/ \
-}
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/* Port-specific settings (override port settings defaulted in chcore.h). */
-/*===========================================================================*/
-
-#endif /* _CHCONF_H_ */
-
-/** @} */
diff --git a/demos/ARM7-AT91SAM7S-GCC/halconf.h b/demos/ARM7-AT91SAM7S-GCC/halconf.h deleted file mode 100644 index c9b3ad25a..000000000 --- a/demos/ARM7-AT91SAM7S-GCC/halconf.h +++ /dev/null @@ -1,342 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
- 2011,2012 Giovanni Di Sirio.
-
- This file is part of ChibiOS/RT.
-
- ChibiOS/RT is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- ChibiOS/RT is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/**
- * @file templates/halconf.h
- * @brief HAL configuration header.
- * @details HAL configuration file, this file allows to enable or disable the
- * various device drivers from your application. You may also use
- * this file in order to override the device drivers default settings.
- *
- * @addtogroup HAL_CONF
- * @{
- */
-
-#ifndef _HALCONF_H_
-#define _HALCONF_H_
-
-#include "mcuconf.h"
-
-/**
- * @brief Enables the TM subsystem.
- */
-#if !defined(HAL_USE_TM) || defined(__DOXYGEN__)
-#define HAL_USE_TM FALSE
-#endif
-
-/**
- * @brief Enables the PAL subsystem.
- */
-#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
-#define HAL_USE_PAL TRUE
-#endif
-
-/**
- * @brief Enables the ADC subsystem.
- */
-#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
-#define HAL_USE_ADC FALSE
-#endif
-
-/**
- * @brief Enables the CAN subsystem.
- */
-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
-#define HAL_USE_CAN FALSE
-#endif
-
-/**
- * @brief Enables the EXT subsystem.
- */
-#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
-#define HAL_USE_EXT FALSE
-#endif
-
-/**
- * @brief Enables the GPT subsystem.
- */
-#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT FALSE
-#endif
-
-/**
- * @brief Enables the I2C subsystem.
- */
-#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C FALSE
-#endif
-
-/**
- * @brief Enables the ICU subsystem.
- */
-#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
-#define HAL_USE_ICU FALSE
-#endif
-
-/**
- * @brief Enables the MAC subsystem.
- */
-#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
-#define HAL_USE_MAC FALSE
-#endif
-
-/**
- * @brief Enables the MMC_SPI subsystem.
- */
-#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_MMC_SPI FALSE
-#endif
-
-/**
- * @brief Enables the PWM subsystem.
- */
-#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM FALSE
-#endif
-
-/**
- * @brief Enables the RTC subsystem.
- */
-#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
-#define HAL_USE_RTC FALSE
-#endif
-
-/**
- * @brief Enables the SDC subsystem.
- */
-#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
-#define HAL_USE_SDC FALSE
-#endif
-
-/**
- * @brief Enables the SERIAL subsystem.
- */
-#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL TRUE
-#endif
-
-/**
- * @brief Enables the SERIAL over USB subsystem.
- */
-#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL_USB FALSE
-#endif
-
-/**
- * @brief Enables the SPI subsystem.
- */
-#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_SPI FALSE
-#endif
-
-/**
- * @brief Enables the UART subsystem.
- */
-#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
-#define HAL_USE_UART FALSE
-#endif
-
-/**
- * @brief Enables the USB subsystem.
- */
-#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
-#define HAL_USE_USB FALSE
-#endif
-
-/*===========================================================================*/
-/* ADC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
-#define ADC_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define ADC_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* CAN driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Sleep mode related APIs inclusion switch.
- */
-#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
-#define CAN_USE_SLEEP_MODE TRUE
-#endif
-
-/*===========================================================================*/
-/* I2C driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables the mutual exclusion APIs on the I2C bus.
- */
-#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define I2C_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* MAC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
-#define MAC_USE_EVENTS TRUE
-#endif
-
-/*===========================================================================*/
-/* MMC_SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Block size for MMC transfers.
- */
-#if !defined(MMC_SECTOR_SIZE) || defined(__DOXYGEN__)
-#define MMC_SECTOR_SIZE 512
-#endif
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- * This option is recommended also if the SPI driver does not
- * use a DMA channel and heavily loads the CPU.
- */
-#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
-#define MMC_NICE_WAITING TRUE
-#endif
-
-/**
- * @brief Number of positive insertion queries before generating the
- * insertion event.
- */
-#if !defined(MMC_POLLING_INTERVAL) || defined(__DOXYGEN__)
-#define MMC_POLLING_INTERVAL 10
-#endif
-
-/**
- * @brief Interval, in milliseconds, between insertion queries.
- */
-#if !defined(MMC_POLLING_DELAY) || defined(__DOXYGEN__)
-#define MMC_POLLING_DELAY 10
-#endif
-
-/**
- * @brief Uses the SPI polled API for small data transfers.
- * @details Polled transfers usually improve performance because it
- * saves two context switches and interrupt servicing. Note
- * that this option has no effect on large transfers which
- * are always performed using DMAs/IRQs.
- */
-#if !defined(MMC_USE_SPI_POLLING) || defined(__DOXYGEN__)
-#define MMC_USE_SPI_POLLING TRUE
-#endif
-
-/*===========================================================================*/
-/* SDC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Number of initialization attempts before rejecting the card.
- * @note Attempts are performed at 10mS intervals.
- */
-#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
-#define SDC_INIT_RETRY 100
-#endif
-
-/**
- * @brief Include support for MMC cards.
- * @note MMC support is not yet implemented so this option must be kept
- * at @p FALSE.
- */
-#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
-#define SDC_MMC_SUPPORT FALSE
-#endif
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- */
-#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
-#define SDC_NICE_WAITING TRUE
-#endif
-
-/*===========================================================================*/
-/* SERIAL driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Default bit rate.
- * @details Configuration parameter, this is the baud rate selected for the
- * default configuration.
- */
-#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
-#define SERIAL_DEFAULT_BITRATE 38400
-#endif
-
-/**
- * @brief Serial buffers size.
- * @details Configuration parameter, you can change the depth of the queue
- * buffers depending on the requirements of your application.
- * @note The default is 64 bytes for both the transmission and receive
- * buffers.
- */
-#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_BUFFERS_SIZE 16
-#endif
-
-/*===========================================================================*/
-/* SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
-#define SPI_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define SPI_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-#endif /* _HALCONF_H_ */
-
-/** @} */
diff --git a/demos/ARM7-AT91SAM7S-GCC/main.c b/demos/ARM7-AT91SAM7S-GCC/main.c deleted file mode 100644 index 1d31f6d9b..000000000 --- a/demos/ARM7-AT91SAM7S-GCC/main.c +++ /dev/null @@ -1,76 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
- 2011,2012 Giovanni Di Sirio.
-
- This file is part of ChibiOS/RT.
-
- ChibiOS/RT is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- ChibiOS/RT is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "ch.h"
-#include "hal.h"
-#include "test.h"
-
-static WORKING_AREA(waThread1, 128);
-static msg_t Thread1(void *p) {
-
- (void)p;
- chRegSetThreadName("blinker");
- while (TRUE) {
- palSetPad(IOPORT1, PIOA_LED1);
- chThdSleepMilliseconds(100);
- palClearPad(IOPORT1, PIOA_LED1);
- chThdSleepMilliseconds(900);
- }
- return 0;
-}
-
-/*
- * Application entry point.
- */
-int main(void) {
-
- /*
- * System initializations.
- * - HAL initialization, this also initializes the configured device drivers
- * and performs the board-specific initializations.
- * - Kernel initialization, the main() function becomes a thread and the
- * RTOS is active.
- */
- halInit();
- chSysInit();
-
- /*
- * Activates the serial driver 1 using the driver default configuration.
- */
- sdStart(&SD1, NULL);
-
- /*
- * Creates the blinker thread.
- */
- chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
-
- /*
- * Normal main() thread activity.
- */
- while (TRUE) {
- chThdSleepMilliseconds(500);
- if (!palReadPad(IOPORT1, PIOA_B1))
- sdWrite(&SD1, (uint8_t *)"Hello World!\r\n", 14);
- if (!palReadPad(IOPORT1, PIOA_B2))
- TestThread(&SD1);
- }
-
- return 0;
-}
diff --git a/demos/ARM7-AT91SAM7S-GCC/mcuconf.h b/demos/ARM7-AT91SAM7S-GCC/mcuconf.h deleted file mode 100644 index 73aa7b777..000000000 --- a/demos/ARM7-AT91SAM7S-GCC/mcuconf.h +++ /dev/null @@ -1,64 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
- 2011,2012 Giovanni Di Sirio.
-
- This file is part of ChibiOS/RT.
-
- ChibiOS/RT is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- ChibiOS/RT is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/*
- * AT91SAM7 drivers configuration.
- * The following settings override the default settings present in
- * the various device driver implementation headers.
- * Note that the settings for each driver only have effect if the driver
- * is enabled in halconf.h.
- */
-
-/*
- * ADC driver system settings.
- */
-
-/*
- * CAN driver system settings.
- */
-
-/*
- * MAC driver system settings.
- */
-#define MAC_TRANSMIT_BUFFERS 2
-#define MAC_RECEIVE_BUFFERS 2
-#define MAC_BUFFERS_SIZE 1518
-#define EMAC_INTERRUPT_PRIORITY (AT91C_AIC_PRIOR_HIGHEST - 3)
-
-/*
- * PWM driver system settings.
- */
-
-/*
- * SERIAL driver system settings.
- */
-#define USE_SAM7_USART0 TRUE
-#define USE_SAM7_USART1 TRUE
-#define SAM7_USART0_PRIORITY (AT91C_AIC_PRIOR_HIGHEST - 2)
-#define SAM7_USART1_PRIORITY (AT91C_AIC_PRIOR_HIGHEST - 2)
-
-/*
- * SPI driver system settings.
- */
-#define USE_AT91SAM7_SPI FALSE
-#define AT91SAM7_SPI_USE_SPI0 TRUE
-#define AT91SAM7_SPI_USE_SPI1 FALSE
-#define AT91SAM7_SPI0_PRIORITY (AT91C_AIC_PRIOR_HIGHEST - 1)
-#define AT91SAM7_SPI1_PRIORITY (AT91C_AIC_PRIOR_HIGHEST - 1)
diff --git a/demos/ARM7-AT91SAM7S-GCC/readme.txt b/demos/ARM7-AT91SAM7S-GCC/readme.txt deleted file mode 100644 index 626516048..000000000 --- a/demos/ARM7-AT91SAM7S-GCC/readme.txt +++ /dev/null @@ -1,28 +0,0 @@ -*****************************************************************************
-** ChibiOS/RT port for ARM7TDMI AT91SAM7S256. **
-*****************************************************************************
-
-** TARGET **
-
-The demo runs on an Olimex SAM7-P256 board.
-
-** The Demo **
-
-The demo currently just flashes the LED1 using a thread.
-The button B1 prints an "Hello World!" string on RS232_0, the button B2
-activates che ChibiOS/RT test suite, output on RS232_0(port baudrate 38400).
-
-** Build Procedure **
-
-The demo was built using the YAGARTO toolchain but any toolchain based on GCC
-and GNU userspace programs will work.
-
-** Notes **
-
-Some files used by the demo are not part of ChibiOS/RT but are Atmel copyright
-and are licensed under a different license, see the header present in all the
-source files under ./demos/os/hal/platform/AT91SAM7/at91lib for details.
-Also note that not all the files present in the Atmel library are distribuited
-with ChibiOS/RT, you can find the whole library on the Atmel web site:
-
- http://www.atmel.com
diff --git a/demos/ARM7-AT91SAM7X-FATFS-GCC/main.c b/demos/ARM7-AT91SAM7X-FATFS-GCC/main.c index 0b3f838fd..c1b5c5a1d 100644 --- a/demos/ARM7-AT91SAM7X-FATFS-GCC/main.c +++ b/demos/ARM7-AT91SAM7X-FATFS-GCC/main.c @@ -29,6 +29,87 @@ #include "evtimer.h"
#include "ff.h"
+/*===========================================================================*/
+/* Card insertion monitor. */
+/*===========================================================================*/
+
+#define POLLING_INTERVAL 10
+#define POLLING_DELAY 10
+
+/**
+ * @brief Card monitor timer.
+ */
+static VirtualTimer tmr;
+
+/**
+ * @brief Debounce counter.
+ */
+static unsigned cnt;
+
+/**
+ * @brief Card event sources.
+ */
+static EventSource inserted_event, removed_event;
+
+/**
+ * @brief Insertion monitor timer callback function.
+ *
+ * @param[in] p pointer to the @p BaseBlockDevice object
+ *
+ * @notapi
+ */
+static void tmrfunc(void *p) {
+ BaseBlockDevice *bbdp = p;
+
+ /* The presence check is performed only while the driver is not in a
+ transfer state because it is often performed by changing the mode of
+ the pin connected to the CS/D3 contact of the card, this could disturb
+ the transfer.*/
+ blkstate_t state = blkGetDriverState(bbdp);
+ chSysLockFromIsr();
+ if ((state != BLK_READING) && (state != BLK_WRITING)) {
+ /* Safe to perform the check.*/
+ if (cnt > 0) {
+ if (blkIsInserted(bbdp)) {
+ if (--cnt == 0) {
+ chEvtBroadcastI(&inserted_event);
+ }
+ }
+ else
+ cnt = POLLING_INTERVAL;
+ }
+ else {
+ if (!blkIsInserted(bbdp)) {
+ cnt = POLLING_INTERVAL;
+ chEvtBroadcastI(&removed_event);
+ }
+ }
+ }
+ chVTSetI(&tmr, MS2ST(POLLING_DELAY), tmrfunc, bbdp);
+ chSysUnlockFromIsr();
+}
+
+/**
+ * @brief Polling monitor start.
+ *
+ * @param[in] p pointer to an object implementing @p BaseBlockDevice
+ *
+ * @notapi
+ */
+static void tmr_init(void *p) {
+
+ chEvtInit(&inserted_event);
+ chEvtInit(&removed_event);
+ chSysLock();
+ cnt = POLLING_INTERVAL;
+ chVTSetI(&tmr, MS2ST(POLLING_DELAY), tmrfunc, p);
+ chSysUnlock();
+}
+
+/*===========================================================================*/
+/* FatFs related. */
+/*===========================================================================*/
+
#define MAX_SPI_BITRATE 100
#define MIN_SPI_BITRATE 250
@@ -198,6 +279,10 @@ static const ShellConfig shell_cfg1 = { commands
};
+/*===========================================================================*/
+/* Main and generic code. */
+/*===========================================================================*/
+
/*
* LCD blinker thread, times are in milliseconds.
*/
@@ -242,6 +327,7 @@ static void InsertHandler(eventid_t id) { static void RemoveHandler(eventid_t id) {
(void)id;
+ mmcDisconnect(&MMCD1);
fs_ready = FALSE;
}
@@ -285,6 +371,11 @@ int main(void) { mmcStart(&MMCD1, &mmccfg);
/*
+ * Activates the card insertion monitor.
+ */
+ tmr_init(&MMCD1);
+
+ /*
* Creates the blinker threads.
*/
chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
@@ -293,8 +384,8 @@ int main(void) { * Normal main() thread activity, in this demo it does nothing except
* sleeping in a loop and listen for events.
*/
- chEvtRegister(&MMCD1.inserted_event, &el0, 0);
- chEvtRegister(&MMCD1.removed_event, &el1, 1);
+ chEvtRegister(&inserted_event, &el0, 0);
+ chEvtRegister(&removed_event, &el1, 1);
while (TRUE) {
if (!shelltp)
shelltp = shellCreate(&shell_cfg1, SHELL_WA_SIZE, NORMALPRIO);
@@ -302,7 +393,7 @@ int main(void) { chThdRelease(shelltp); /* Recovers memory of the previous shell. */
shelltp = NULL; /* Triggers spawning of a new shell. */
}
- chEvtDispatch(evhndl, chEvtWaitOne(ALL_EVENTS));
+ chEvtDispatch(evhndl, chEvtWaitOneTimeout(ALL_EVENTS, MS2ST(500)));
}
return 0;
}
diff --git a/demos/ARM7-LPC214x-FATFS-GCC/Makefile b/demos/ARM7-LPC214x-FATFS-GCC/Makefile index 02f3b3f31..a0eaaffb7 100644 --- a/demos/ARM7-LPC214x-FATFS-GCC/Makefile +++ b/demos/ARM7-LPC214x-FATFS-GCC/Makefile @@ -68,7 +68,7 @@ CSRC = $(PORTSRC) \ $(TESTSRC) \
${BOARDPATH}/buzzer.c \
$(CHIBIOS)/os/various/evtimer.c \
- $(CHIBIOS)/os/various/syscalls.c \
+ $(CHIBIOS)/os/various/chprintf.c \
main.c
# C++ sources that can be compiled in ARM or THUMB mode depending on the global
@@ -149,7 +149,7 @@ CPPWARN = -Wall -Wextra #
# List all default C defines here, like -D_DEBUG=1
-DDEFS = -DSTDOUT_SD=SD1 -DSTDIN_SD=SD1
+DDEFS =
# List all default ASM defines here, like -D_DEBUG=1
DADEFS =
diff --git a/demos/ARM7-LPC214x-FATFS-GCC/main.c b/demos/ARM7-LPC214x-FATFS-GCC/main.c index 1b3b86848..313ce7c2f 100644 --- a/demos/ARM7-LPC214x-FATFS-GCC/main.c +++ b/demos/ARM7-LPC214x-FATFS-GCC/main.c @@ -18,17 +18,98 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#include <stdio.h>
#include <string.h>
#include "ch.h"
#include "hal.h"
#include "test.h"
+#include "chprintf.h"
#include "evtimer.h"
#include "buzzer.h"
#include "ff.h"
+/*===========================================================================*/
+/* Card insertion monitor. */
+/*===========================================================================*/
+
+#define POLLING_INTERVAL 10
+#define POLLING_DELAY 10
+
+/**
+ * @brief Card monitor timer.
+ */
+static VirtualTimer tmr;
+
+/**
+ * @brief Debounce counter.
+ */
+static unsigned cnt;
+
+/**
+ * @brief Card event sources.
+ */
+static EventSource inserted_event, removed_event;
+
+/**
+ * @brief Insertion monitor timer callback function.
+ *
+ * @param[in] p pointer to the @p BaseBlockDevice object
+ *
+ * @notapi
+ */
+static void tmrfunc(void *p) {
+ BaseBlockDevice *bbdp = p;
+
+ /* The presence check is performed only while the driver is not in a
+ transfer state because it is often performed by changing the mode of
+ the pin connected to the CS/D3 contact of the card, this could disturb
+ the transfer.*/
+ blkstate_t state = blkGetDriverState(bbdp);
+ chSysLockFromIsr();
+ if ((state != BLK_READING) && (state != BLK_WRITING)) {
+ /* Safe to perform the check.*/
+ if (cnt > 0) {
+ if (blkIsInserted(bbdp)) {
+ if (--cnt == 0) {
+ chEvtBroadcastI(&inserted_event);
+ }
+ }
+ else
+ cnt = POLLING_INTERVAL;
+ }
+ else {
+ if (!blkIsInserted(bbdp)) {
+ cnt = POLLING_INTERVAL;
+ chEvtBroadcastI(&removed_event);
+ }
+ }
+ }
+ chVTSetI(&tmr, MS2ST(POLLING_DELAY), tmrfunc, bbdp);
+ chSysUnlockFromIsr();
+}
+
+/**
+ * @brief Polling monitor start.
+ *
+ * @param[in] p pointer to an object implementing @p BaseBlockDevice
+ *
+ * @notapi
+ */
+static void tmr_init(void *p) {
+
+ chEvtInit(&inserted_event);
+ chEvtInit(&removed_event);
+ chSysLock();
+ cnt = POLLING_INTERVAL;
+ chVTSetI(&tmr, MS2ST(POLLING_DELAY), tmrfunc, p);
+ chSysUnlock();
+}
+
+/*===========================================================================*/
+/* FatFs related. */
+/*===========================================================================*/
+
/**
* @brief FS object.
*/
@@ -66,6 +147,43 @@ static MMCConfig mmccfg = {&SPID1, &ls_spicfg, &hs_spicfg}; /* Generic large buffer.*/
uint8_t fbuff[1024];
+static FRESULT scan_files(BaseSequentialStream *chp, char *path) {
+ FRESULT res;
+ FILINFO fno;
+ DIR dir;
+ int i;
+ char *fn;
+
+ res = f_opendir(&dir, path);
+ if (res == FR_OK) {
+ i = strlen(path);
+ for (;;) {
+ res = f_readdir(&dir, &fno);
+ if (res != FR_OK || fno.fname[0] == 0)
+ break;
+ if (fno.fname[0] == '.')
+ continue;
+ fn = fno.fname;
+ if (fno.fattrib & AM_DIR) {
+ path[i++] = '/';
+ strcpy(&path[i], fn);
+ res = scan_files(chp, path);
+ if (res != FR_OK)
+ break;
+ path[i] = 0;
+ }
+ else {
+ chprintf(chp, "%s/%s\r\n", path, fn);
+ }
+ }
+ }
+ return res;
+}
+
+/*===========================================================================*/
+/* Main and generic code. */
+/*===========================================================================*/
+
/*
* Red LEDs blinker thread, times are in milliseconds.
*/
@@ -104,39 +222,6 @@ static msg_t Thread2(void *arg) { return 0;
}
-static FRESULT scan_files(char *path)
-{
- FRESULT res;
- FILINFO fno;
- DIR dir;
- int i;
- char *fn;
-
- res = f_opendir(&dir, path);
- if (res == FR_OK) {
- i = strlen(path);
- for (;;) {
- res = f_readdir(&dir, &fno);
- if (res != FR_OK || fno.fname[0] == 0)
- break;
- if (fno.fname[0] == '.')
- continue;
- fn = fno.fname;
- if (fno.fattrib & AM_DIR) {
- siprintf(&path[i], "/%s", fn);
- res = scan_files(path);
- if (res != FR_OK)
- break;
- path[i] = 0;
- }
- else {
- iprintf("%s/%s\r\n", path, fn);
- }
- }
- }
- return res;
-}
-
/*
* Executed as event handler at 500mS intervals.
*/
@@ -151,14 +236,15 @@ static void TimerHandler(eventid_t id) { err = f_getfree("/", &clusters, &fsp);
if (err != FR_OK) {
- iprintf("FS: f_getfree() failed\r\n");
+ chprintf((BaseSequentialStream *)&SD1, "FS: f_getfree() failed\r\n");
return;
}
- iprintf("FS: %lu free clusters, %u sectors per cluster, %lu bytes free\r\n",
- clusters, MMC_FS.csize,
- clusters * (uint32_t)MMC_FS.csize * (uint32_t)MMC_SECTOR_SIZE);
+ chprintf((BaseSequentialStream *)&SD1,
+ "FS: %lu free clusters, %lu sectors per cluster, %lu bytes free\r\n",
+ clusters, (uint32_t)MMC_FS.csize,
+ clusters * (uint32_t)MMC_FS.csize * (uint32_t)MMC_SECTOR_SIZE);
fbuff[0] = 0;
- scan_files((char *)fbuff);
+ scan_files((BaseSequentialStream *)&SD1, (char *)fbuff);
}
}
else if (!palReadPad(IOPORT1, PA_BUTTON2)) {
@@ -179,25 +265,25 @@ static void InsertHandler(eventid_t id) { (void)id;
buzzPlayWait(1000, MS2ST(100));
buzzPlayWait(2000, MS2ST(100));
- iprintf("MMC: inserted\r\n");
+ chprintf((BaseSequentialStream *)&SD1, "MMC: inserted\r\n");
/*
* On insertion MMC initialization and FS mount.
*/
- iprintf("MMC: initialization ");
+ chprintf((BaseSequentialStream *)&SD1, "MMC: initialization ");
if (mmcConnect(&MMCD1)) {
- iprintf("failed\r\n");
+ chprintf((BaseSequentialStream *)&SD1, "failed\r\n");
return;
}
- iprintf("ok\r\n");
- iprintf("FS: mount ");
+ chprintf((BaseSequentialStream *)&SD1, "ok\r\n");
+ chprintf((BaseSequentialStream *)&SD1, "FS: mount ");
err = f_mount(0, &MMC_FS);
if (err != FR_OK) {
- iprintf("failed\r\n");
+ chprintf((BaseSequentialStream *)&SD1, "failed\r\n");
mmcDisconnect(&MMCD1);
return;
}
fs_ready = TRUE;
- iprintf("ok\r\n");
+ chprintf((BaseSequentialStream *)&SD1, "ok\r\n");
buzzPlay(440, MS2ST(200));
}
@@ -207,7 +293,8 @@ static void InsertHandler(eventid_t id) { static void RemoveHandler(eventid_t id) {
(void)id;
- iprintf("MMC: removed\r\n");
+ chprintf((BaseSequentialStream *)&SD1, "MMC: removed\r\n");
+ mmcDisconnect(&MMCD1);
fs_ready = FALSE;
buzzPlayWait(2000, MS2ST(100));
buzzPlayWait(1000, MS2ST(100));
@@ -252,6 +339,11 @@ int main(void) { mmcStart(&MMCD1, &mmccfg);
/*
+ * Activates the card insertion monitor.
+ */
+ tmr_init(&MMCD1);
+
+ /*
* Creates the blinker threads.
*/
chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
@@ -264,8 +356,8 @@ int main(void) { evtInit(&evt, MS2ST(500)); /* Initializes an event timer object. */
evtStart(&evt); /* Starts the event timer. */
chEvtRegister(&evt.et_es, &el0, 0); /* Registers on the timer event source. */
- chEvtRegister(&MMCD1.inserted_event, &el1, 1);
- chEvtRegister(&MMCD1.removed_event, &el2, 2);
+ chEvtRegister(&inserted_event, &el1, 1);
+ chEvtRegister(&removed_event, &el2, 2);
while (TRUE)
chEvtDispatch(evhndl, chEvtWaitOne(ALL_EVENTS));
return 0;
diff --git a/demos/ARMCM3-STM32F103-FATFS/main.c b/demos/ARMCM3-STM32F103-FATFS/main.c index 57fc5d2b3..ce5026a95 100644 --- a/demos/ARMCM3-STM32F103-FATFS/main.c +++ b/demos/ARMCM3-STM32F103-FATFS/main.c @@ -382,7 +382,7 @@ int main(void) { chThdRelease(shelltp); /* Recovers memory of the previous shell. */
shelltp = NULL; /* Triggers spawning of a new shell. */
}
- chEvtDispatch(evhndl, chEvtWaitOne(ALL_EVENTS));
+ chEvtDispatch(evhndl, chEvtWaitOneTimeout(ALL_EVENTS, MS2ST(500)));
}
return 0;
}
diff --git a/demos/ARMCM3-STM32F103ZG-FATFS/main.c b/demos/ARMCM3-STM32F103ZG-FATFS/main.c index 5433daced..fe85ac1aa 100644 --- a/demos/ARMCM3-STM32F103ZG-FATFS/main.c +++ b/demos/ARMCM3-STM32F103ZG-FATFS/main.c @@ -360,6 +360,6 @@ int main(void) { chThdRelease(shelltp); /* Recovers memory of the previous shell. */
shelltp = NULL; /* Triggers spawning of a new shell. */
}
- chEvtDispatch(evhndl, chEvtWaitOne(ALL_EVENTS));
+ chEvtDispatch(evhndl, chEvtWaitOneTimeout(ALL_EVENTS, MS2ST(500)));
}
}
|