diff options
31 files changed, 5837 insertions, 1 deletions
diff --git a/demos/AVR/NIL-DIGISPARK-ATTINY-167/Makefile b/demos/AVR/NIL-DIGISPARK-ATTINY-167/Makefile new file mode 100644 index 000000000..4c76fa724 --- /dev/null +++ b/demos/AVR/NIL-DIGISPARK-ATTINY-167/Makefile @@ -0,0 +1,584 @@ +# Hey Emacs, this is a -*- makefile -*-
+#----------------------------------------------------------------------------
+# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
+#
+# Released to the Public Domain
+#
+# Additional material for this makefile was written by:
+# Peter Fleury
+# Tim Henigan
+# Colin O'Flynn
+# Reiner Patommel
+# Markus Pfaff
+# Sander Pool
+# Frederik Rouleau
+# Carlos Lamas
+#
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device, using avrdude.
+# Please customize the avrdude settings below first!
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+# with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+# bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Activation of the smart build
+USE_SMART_BUILD = yes
+
+# MCU name
+MCU = attiny167
+
+# Processor frequency.
+F_CPU = 16000000
+
+# Output format. (can be srec, ihex, binary)
+FORMAT = ihex
+
+# Target file name (without extension).
+TARGET = ch
+
+# Object files directory
+# To put object files in current directory, use a dot (.), do NOT make
+# this an empty or blank macro!
+OBJDIR = .
+
+# Imported source files
+CHIBIOS = ../../..
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/boards/DIGISPARK_ATTINY_167/board.mk
+include $(CHIBIOS)/os/hal/ports/AVR/TINY/platform.mk
+include $(CHIBIOS)/os/hal/osal/nil/osal.mk
+include $(CHIBIOS)/os/nil/nil.mk
+include $(CHIBIOS)/os/common/ports/AVR/compilers/GCC/mk/port.mk
+
+# List C source files here. (C dependencies are automatically generated.)
+SRC = $(KERNSRC) \
+ $(PORTSRC) \
+ $(OSALSRC) \
+ $(HALSRC) \
+ $(PLATFORMSRC) \
+ $(BOARDSRC) \
+ main.c
+
+# List C++ source files here. (C dependencies are automatically generated.)
+CPPSRC =
+
+# List Assembler source files here.
+# Make them always end in a capital .S. Files ending in a lowercase .s
+# will not be considered source files but generated files (assembler
+# output from the compiler), and will be deleted upon "make clean"!
+# Even though the DOS/Win* filesystem matches both .s and .S the same,
+# it will preserve the spelling of the filenames, and gcc itself does
+# care about how the name is spelled on its command-line.
+ASRC =
+
+# Optimization level, can be [0, 1, 2, 3, s].
+# 0 = turn off optimization. s = optimize for size.
+# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
+OPT = 2
+
+# Debugging format.
+# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
+# AVR Studio 4.10 requires dwarf-2.
+# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
+DEBUG = dwarf-2
+
+# List any extra directories to look for include files here.
+# Each directory must be seperated by a space.
+# Use forward slashes for directory separators.
+# For a directory that has spaces, enclose it in quotes.
+EXTRAINCDIRS = $(CHIBIOS)/os/license $(PORTINC) $(KERNINC) \
+ $(HALINC) $(OSALINC) $(PLATFORMINC) \
+ $(BOARDINC) $(CHIBIOS)/os/various
+
+# Compiler flag to set the C Standard level.
+# c89 = "ANSI" C
+# gnu89 = c89 plus GCC extensions
+# c99 = ISO C99 standard (not yet fully implemented)
+# gnu99 = c99 plus GCC extensions
+CSTANDARD = -std=gnu11
+
+# Place -D or -U options here for C sources
+CDEFS = -DF_CPU=$(F_CPU)UL
+
+# Place -D or -U options here for ASM sources
+ADEFS = -DF_CPU=$(F_CPU)
+
+# Place -D or -U options here for C++ sources
+CPPDEFS = -DF_CPU=$(F_CPU)UL
+#CPPDEFS += -D__STDC_LIMIT_MACROS
+#CPPDEFS += -D__STDC_CONSTANT_MACROS
+
+#---------------- Compiler Options C ----------------
+# -g*: generate debugging information
+# -O*: optimization level
+# -f...: tuning, see GCC manual and avr-libc documentation
+# -Wall...: warning level
+# -Wa,...: tell GCC to pass this to the assembler.
+# -adhlns...: create assembler listing
+CFLAGS = -g$(DEBUG)
+CFLAGS += $(CDEFS)
+CFLAGS += -O$(OPT)
+CFLAGS += -funsigned-char
+CFLAGS += -funsigned-bitfields
+CFLAGS += -fpack-struct
+CFLAGS += -fshort-enums
+#CFLAGS += -fno-strict-aliasing
+CFLAGS += -Wall
+CFLAGS += -Wstrict-prototypes
+#CFLAGS += -mshort-calls
+#CFLAGS += -fno-unit-at-a-time
+#CFLAGS += -Wundef
+#CFLAGS += -Wunreachable-code
+#CFLAGS += -Wsign-compare
+CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
+CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
+CFLAGS += $(CSTANDARD)
+#CFLAGS += -mrelax
+CFLAGS += -fdata-sections
+CFLAGS += -ffunction-sections
+
+#---------------- Compiler Options C++ ----------------
+# -g*: generate debugging information
+# -O*: optimization level
+# -f...: tuning, see GCC manual and avr-libc documentation
+# -Wall...: warning level
+# -Wa,...: tell GCC to pass this to the assembler.
+# -adhlns...: create assembler listing
+CPPFLAGS = -g$(DEBUG)
+CPPFLAGS += $(CPPDEFS)
+CPPFLAGS += -O$(OPT)
+CPPFLAGS += -funsigned-char
+CPPFLAGS += -funsigned-bitfields
+CPPFLAGS += -fpack-struct
+CPPFLAGS += -fshort-enums
+CPPFLAGS += -fno-exceptions
+CPPFLAGS += -Wall
+CFLAGS += -Wundef
+#CPPFLAGS += -mshort-calls
+#CPPFLAGS += -fno-unit-at-a-time
+#CPPFLAGS += -Wstrict-prototypes
+#CPPFLAGS += -Wunreachable-code
+#CPPFLAGS += -Wsign-compare
+CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
+CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
+#CPPFLAGS += $(CSTANDARD)
+CPPFLAGS += -fdata-sections
+CPPFLAGS += -ffunction-sections
+
+#---------------- Assembler Options ----------------
+# -Wa,...: tell GCC to pass this to the assembler.
+# -adhlns: create listing
+# -gstabs: have the assembler create line number information; note that
+# for use in COFF files, additional information about filenames
+# and function names needs to be present in the assembler source
+# files -- see avr-libc docs [FIXME: not yet described there]
+# -listing-cont-lines: Sets the maximum number of continuation lines of hex
+# dump that will be displayed for a given single line of source input.
+ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
+
+#---------------- Library Options ----------------
+# Minimalistic printf version
+PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
+
+# Floating point printf version (requires MATH_LIB = -lm below)
+PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
+
+# If this is left blank, then it will use the Standard printf version.
+PRINTF_LIB = $(PRINTF_LIB_MIN)
+#PRINTF_LIB = $(PRINTF_LIB_MIN)
+#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
+
+# Minimalistic scanf version
+SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
+
+# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
+SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
+
+# If this is left blank, then it will use the Standard scanf version.
+SCANF_LIB = $(SCANF_LIB_MIN)
+#SCANF_LIB = $(SCANF_LIB_MIN)
+#SCANF_LIB = $(SCANF_LIB_FLOAT)
+
+MATH_LIB = -lm
+
+# List any extra directories to look for libraries here.
+# Each directory must be seperated by a space.
+# Use forward slashes for directory separators.
+# For a directory that has spaces, enclose it in quotes.
+EXTRALIBDIRS =
+
+#---------------- External Memory Options ----------------
+
+# 64 KB of external RAM, starting after internal RAM (ATmega128!),
+# used for variables (.data/.bss) and heap (malloc()).
+#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
+
+# 64 KB of external RAM, starting after internal RAM (ATmega128!),
+# only used for heap (malloc()).
+#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
+
+EXTMEMOPTS =
+
+#---------------- Linker Options ----------------
+# -Wl,...: tell GCC to pass this to linker.
+# -Map: create map file
+# --cref: add cross reference to map file
+LDFLAGS = -Wl,-Map=$(TARGET).map,--cref,--gc-sections
+LDFLAGS += $(EXTMEMOPTS)
+LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
+LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
+#LDFLAGS += -T linker_script.x
+
+#---------------- Programming Options (avrdude) ----------------
+
+# Programming hardware: alf avr910 avrisp bascom bsd
+# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
+#
+# Type: avrdude -c ?
+# to get a full listing.
+#
+AVRDUDE_PROGRAMMER = arduino
+
+# com1 = serial port. Use lpt1 to connect to parallel port.
+AVRDUDE_PORT = /dev/ttyACM0 # programmer connected to serial device
+
+AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
+#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
+
+# Uncomment the following if you want avrdude's erase cycle counter.
+# Note that this counter needs to be initialized first using -Yn,
+# see avrdude manual.
+#AVRDUDE_ERASE_COUNTER = -y
+
+# Uncomment the following if you do /not/ wish a verification to be
+# performed after programming the device.
+#AVRDUDE_NO_VERIFY = -V
+
+# Increase verbosity level. Please use this when submitting bug
+# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
+# to submit bug reports.
+#AVRDUDE_VERBOSE = -v -v
+
+AVRDUDE_FLAGS = -p $(MCU)
+AVRDUDE_FLAGS += -P $(AVRDUDE_PORT)
+AVRDUDE_FLAGS += -b 115200
+AVRDUDE_FLAGS += -c $(AVRDUDE_PROGRAMMER)
+AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
+AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
+AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
+
+#---------------- Debugging Options ----------------
+
+# For simulavr only - target MCU frequency.
+DEBUG_MFREQ = $(F_CPU)
+
+# Set the DEBUG_UI to either gdb or insight.
+# DEBUG_UI = gdb
+DEBUG_UI = insight
+
+# Set the debugging back-end to either avarice, simulavr.
+DEBUG_BACKEND = avarice
+#DEBUG_BACKEND = simulavr
+
+# GDB Init Filename.
+GDBINIT_FILE = __avr_gdbinit
+
+# When using avarice settings for the JTAG
+JTAG_DEV = /dev/com1
+
+# Debugging port used to communicate between GDB / avarice / simulavr.
+DEBUG_PORT = 4242
+
+# Debugging host used to communicate between GDB / avarice / simulavr, normally
+# just set to localhost unless doing some sort of crazy debugging when
+# avarice is running on a different computer.
+DEBUG_HOST = localhost
+
+#============================================================================
+
+# Define programs and commands.
+SHELL = sh
+CC = avr-gcc
+OBJCOPY = avr-objcopy
+OBJDUMP = avr-objdump
+SIZE = avr-size
+AR = avr-ar rcs
+NM = avr-nm
+AVRDUDE = avrdude
+REMOVE = rm -f
+REMOVEDIR = rm -rf
+COPY = cp
+WINSHELL = cmd
+
+# Define Messages
+# English
+MSG_ERRORS_NONE = Errors: none
+MSG_BEGIN = -------- begin --------
+MSG_END = -------- end --------
+MSG_SIZE_BEFORE = Size before:
+MSG_SIZE_AFTER = Size after:
+MSG_COFF = Converting to AVR COFF:
+MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
+MSG_FLASH = Creating load file for Flash:
+MSG_EEPROM = Creating load file for EEPROM:
+MSG_EXTENDED_LISTING = Creating Extended Listing:
+MSG_SYMBOL_TABLE = Creating Symbol Table:
+MSG_LINKING = Linking:
+MSG_COMPILING = Compiling C:
+MSG_COMPILING_CPP = Compiling C++:
+MSG_ASSEMBLING = Assembling:
+MSG_CLEANING = Cleaning project:
+MSG_CREATING_LIBRARY = Creating library:
+
+# Define all object files.
+OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
+
+# Define all listing files.
+LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
+
+# Compiler flags to generate dependency files.
+GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
+
+# Combine all necessary flags and optional flags.
+# Add target processor to flags.
+ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
+ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
+ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
+
+# Default target.
+all: begin gccversion sizebefore build sizeafter end
+
+# Change the build target to build a HEX file or a library.
+build: elf hex bin eep lss sym
+#build: lib
+
+elf: $(TARGET).elf
+hex: $(TARGET).hex
+bin: $(TARGET).bin
+eep: $(TARGET).eep
+lss: $(TARGET).lss
+sym: $(TARGET).sym
+LIBNAME=lib$(TARGET).a
+lib: $(LIBNAME)
+
+# Eye candy.
+# AVR Studio 3.x does not check make's exit code but relies on
+# the following magic strings to be generated by the compile job.
+begin:
+ @echo
+ @echo $(MSG_BEGIN)
+
+end:
+ @echo $(MSG_END)
+ @echo
+
+# Display size of file.
+HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
+ELFSIZE = $(SIZE) --mcu=$(MCU) --format=avr $(TARGET).elf
+
+sizebefore:
+ @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
+ 2>/dev/null; echo; fi
+
+sizeafter:
+ @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
+ 2>/dev/null; echo; fi
+
+# Display compiler version information.
+gccversion :
+ @$(CC) --version
+
+# Program the device.
+#program: $(TARGET).hex $(TARGET).eep
+# $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
+
+#
+# Rule and variable used to program the ATtiny 85.
+################################################################################
+MICRONUCLEUS = micronucleus # Micronucleus command
+MICRONUCLEUS_TIMEOUT_ARG = --timeout 60 # Time out command argument
+MICRONUCLEUS_RUN_ARG = --run # Use to run program after flashing
+MICRONUCLEUS_TYPE_ARG = --type raw # intel-hex(.hex) | raw(.bin)
+MICRONUCLEUS_DUMP_PROGRESS = --dump-progress # dump progress while flashing
+
+MICRONUCLEUS_FLAGS = $(MICRONUCLEUS_TYPE_ARG)
+MICRONUCLEUS_FLAGS += $(MICRONUCLEUS_TIMEOUT_ARG)
+MICRONUCLEUS_FLAGS += $(MICRONUCLEUS_RUN_ARG)
+
+program: $(TARGET).bin
+ @echo
+ @echo $(MSG_BEGIN)
+ $(MICRONUCLEUS) $(MICRONUCLEUS_FLAGS) $(TARGET).bin
+ @echo $(MSG_END)
+ @echo
+
+
+# Generate avr-gdb config/init file which does the following:
+# define the reset signal, load the target file, connect to target, and set
+# a breakpoint at main().
+gdb-config:
+ @$(REMOVE) $(GDBINIT_FILE)
+ @echo define reset >> $(GDBINIT_FILE)
+ @echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
+ @echo end >> $(GDBINIT_FILE)
+ @echo file $(TARGET).elf >> $(GDBINIT_FILE)
+ @echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE)
+ifeq ($(DEBUG_BACKEND),simulavr)
+ @echo load >> $(GDBINIT_FILE)
+endif
+ @echo break main >> $(GDBINIT_FILE)
+
+debug: gdb-config $(TARGET).elf
+ifeq ($(DEBUG_BACKEND), avarice)
+ @echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
+ @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
+ $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
+ @$(WINSHELL) /c pause
+
+else
+ @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
+ $(DEBUG_MFREQ) --port $(DEBUG_PORT)
+endif
+ @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
+
+# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
+COFFCONVERT = $(OBJCOPY) --debugging
+COFFCONVERT += --change-section-address .data-0x800000
+COFFCONVERT += --change-section-address .bss-0x800000
+COFFCONVERT += --change-section-address .noinit-0x800000
+COFFCONVERT += --change-section-address .eeprom-0x810000
+
+coff: $(TARGET).elf
+ @echo
+ @echo $(MSG_COFF) $(TARGET).cof
+ $(COFFCONVERT) -O coff-avr $< $(TARGET).cof
+
+extcoff: $(TARGET).elf
+ @echo
+ @echo $(MSG_EXTENDED_COFF) $(TARGET).cof
+ $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
+
+# Create final output files (.hex, .eep) from ELF output file.
+%.hex: %.elf
+ @echo
+ @echo $(MSG_FLASH) $@
+ $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
+
+%.bin: %.elf
+ @echo
+ @echo $(MSG_FLASH) $@
+ $(OBJCOPY) -O binary -R .eeprom $< $@
+
+%.eep: %.elf
+ @echo
+ @echo $(MSG_EEPROM) $@
+ -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
+ --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
+
+# Create extended listing file from ELF output file.
+%.lss: %.elf
+ @echo
+ @echo $(MSG_EXTENDED_LISTING) $@
+ $(OBJDUMP) -h -S $< > $@
+
+# Create a symbol table from ELF output file.
+%.sym: %.elf
+ @echo
+ @echo $(MSG_SYMBOL_TABLE) $@
+ $(NM) -n $< > $@
+
+# Create library from object files.
+.SECONDARY : $(TARGET).a
+.PRECIOUS : $(OBJ)
+%.a: $(OBJ)
+ @echo
+ @echo $(MSG_CREATING_LIBRARY) $@
+ $(AR) $@ $(OBJ)
+
+# Link: create ELF output file from object files.
+.SECONDARY : $(TARGET).elf
+.PRECIOUS : $(OBJ)
+%.elf: $(OBJ)
+ @echo
+ @echo $(MSG_LINKING) $@
+ $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
+
+# Compile: create object files from C source files.
+$(OBJDIR)/%.o : %.c
+ @echo
+ @echo $(MSG_COMPILING) $<
+ $(CC) -c $(ALL_CFLAGS) $< -o $@
+
+# Compile: create object files from C++ source files.
+$(OBJDIR)/%.o : %.cpp
+ @echo
+ @echo $(MSG_COMPILING_CPP) $<
+ $(CC) -c $(ALL_CPPFLAGS) $< -o $@
+
+# Compile: create assembler files from C source files.
+%.s : %.c
+ $(CC) -S $(ALL_CFLAGS) $< -o $@
+
+# Compile: create assembler files from C++ source files.
+%.s : %.cpp
+ $(CC) -S $(ALL_CPPFLAGS) $< -o $@
+
+# Assemble: create object files from assembler source files.
+$(OBJDIR)/%.o : %.S
+ @echo
+ @echo $(MSG_ASSEMBLING) $<
+ $(CC) -c $(ALL_ASFLAGS) $< -o $@
+
+# Create preprocessed source for use in sending a bug report.
+%.i : %.c
+ $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
+
+# Target: clean project.
+clean: begin clean_list end
+
+clean_list :
+ @echo
+ @echo $(MSG_CLEANING)
+ $(REMOVE) $(TARGET).hex
+ $(REMOVE) $(TARGET).bin
+ $(REMOVE) $(TARGET).eep
+ $(REMOVE) $(TARGET).cof
+ $(REMOVE) $(TARGET).elf
+ $(REMOVE) $(TARGET).map
+ $(REMOVE) $(TARGET).sym
+ $(REMOVE) $(TARGET).lss
+ $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o)
+ $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst)
+ $(REMOVE) $(SRC:.c=.s)
+ $(REMOVE) $(SRC:.c=.d)
+ $(REMOVE) $(SRC:.c=.i)
+ $(REMOVEDIR) .dep
+
+# Create object files directory
+$(shell mkdir $(OBJDIR) 2>/dev/null)
+
+# Include the dependency files.
+-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
+
+# Listing of phony targets.
+.PHONY : all begin finish end sizebefore sizeafter gccversion \
+build elf hex bin eep lss sym coff extcoff \
+clean clean_list program debug gdb-config
diff --git a/demos/AVR/NIL-DIGISPARK-ATTINY-167/chconf.h b/demos/AVR/NIL-DIGISPARK-ATTINY-167/chconf.h new file mode 100644 index 000000000..e2c8ea18e --- /dev/null +++ b/demos/AVR/NIL-DIGISPARK-ATTINY-167/chconf.h @@ -0,0 +1,274 @@ +/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file chconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_NIL_CONF_
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Number of user threads in the application.
+ * @note This number is not inclusive of the idle thread which is
+ * Implicitly handled.
+ */
+#define CH_CFG_NUM_THREADS 1
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name System timer settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System time counter resolution.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION 16
+
+/**
+ * @brief System tick frequency.
+ * @note This value together with the @p CH_CFG_ST_RESOLUTION
+ * option defines the maximum amount of time allowed for
+ * timeouts.
+ */
+#define CH_CFG_ST_FREQUENCY 15624
+
+/**
+ * @brief Time delta constant for the tick-less mode.
+ * @note If this value is zero then the system uses the classic
+ * periodic tick. This value represents the minimum number
+ * of ticks that is safe to specify in a timeout directive.
+ * The value one is not valid, timeouts are rounded up to
+ * this value.
+ */
+#define CH_CFG_ST_TIMEDELTA 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES TRUE
+
+/**
+ * @brief Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note Feature not currently implemented.
+ * @note The default is @p FALSE.
+ */
+#define CH_CFG_USE_MUTEXES FALSE
+
+/**
+ * @brief Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS TRUE
+
+/**
+ * @brief Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ * included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES TRUE
+
+/**
+ * @brief Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE TRUE
+
+/**
+ * @brief Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_HEAP TRUE
+
+/**
+ * @brief Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS TRUE
+
+/**
+ * @brief Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ * then the whole available RAM is used. The core memory is made
+ * available to the heap allocator and/or can be used directly through
+ * the simplified core memory allocator.
+ *
+ * @note In order to let the OS manage the whole RAM the linker script must
+ * provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE 0
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Debug option, kernel statistics.
+ *
+ * @note Feature not currently implemented.
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS FALSE
+
+/**
+ * @brief Debug option, system state check.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK FALSE
+
+/**
+ * @brief Debug option, parameters checks.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS FALSE
+
+/**
+ * @brief System assertions.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS FALSE
+
+/**
+ * @brief Stack check.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System initialization hook.
+ */
+#if !defined(CH_CFG_SYSTEM_INIT_HOOK) || defined(__DOXYGEN__)
+#define CH_CFG_SYSTEM_INIT_HOOK() { \
+}
+#endif
+
+/**
+ * @brief Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXT_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief Threads initialization hook.
+ */
+#define CH_CFG_THREAD_EXT_INIT_HOOK(tr) { \
+ /* Add custom threads initialization code here.*/ \
+}
+
+/**
+ * @brief Idle thread enter hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() { \
+}
+
+/**
+ * @brief Idle thread leave hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() { \
+}
+
+/**
+ * @brief System halt hook.
+ */
+#if !defined(CH_CFG_SYSTEM_HALT_HOOK) || defined(__DOXYGEN__)
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
+}
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in nilcore.h). */
+/*===========================================================================*/
+
+#endif /* CHCONF_H */
+
+/** @} */
diff --git a/demos/AVR/NIL-DIGISPARK-ATTINY-167/halconf.h b/demos/AVR/NIL-DIGISPARK-ATTINY-167/halconf.h new file mode 100644 index 000000000..797b62138 --- /dev/null +++ b/demos/AVR/NIL-DIGISPARK-ATTINY-167/halconf.h @@ -0,0 +1,402 @@ +/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/halconf.h
+ * @brief HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ * various device drivers from your application. You may also use
+ * this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef HALCONF_H
+#define HALCONF_H
+
+#include "mcuconf.h"
+
+/**
+ * @brief Enables the TM subsystem.
+ */
+#if !defined(HAL_USE_TM) || defined(__DOXYGEN__)
+#define HAL_USE_TM FALSE
+#endif
+
+/**
+ * @brief Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL TRUE
+#endif
+
+/**
+ * @brief Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC FALSE
+#endif
+
+/**
+ * @brief Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC FALSE
+#endif
+
+/**
+ * @brief Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN FALSE
+#endif
+
+/**
+ * @brief Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT FALSE
+#endif
+
+/**
+ * @brief Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT FALSE
+#endif
+
+/**
+ * @brief Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C FALSE
+#endif
+
+/**
+ * @brief Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU FALSE
+#endif
+
+/**
+ * @brief Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC FALSE
+#endif
+
+/**
+ * @brief Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM FALSE
+#endif
+
+/**
+ * @brief Enables the QSPI subsystem.
+ */
+#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__)
+#define HAL_USE_QSPI FALSE
+#endif
+
+/**
+ * @brief Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC FALSE
+#endif
+
+/**
+ * @brief Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC FALSE
+#endif
+
+/**
+ * @brief Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART TRUE
+#endif
+
+/**
+ * @brief Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL FALSE
+#endif
+
+/**
+ * @brief Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB FALSE
+#endif
+
+/**
+ * @brief Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART FALSE
+#endif
+
+/**
+ * @brief Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB FALSE
+#endif
+
+/**
+ * @brief Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S FALSE
+#endif
+
+/**
+ * @brief Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY FALSE
+#endif
+
+/**
+ * @brief Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ * This option is recommended also if the SPI driver does not
+ * use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Number of initialization attempts before rejecting the card.
+ * @note Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY 100
+#endif
+
+/**
+ * @brief Include support for MMC cards.
+ * @note MMC support is not yet implemented so this option must be kept
+ * at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT FALSE
+#endif
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ * default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE 38400
+#endif
+
+/**
+ * @brief Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ * buffers depending on the requirements of your application.
+ * @note The default is 16 bytes for both the transmission and receive
+ * buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE 16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting. */
+/*===========================================================================*/
+
+/**
+ * @brief Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ * the USB data endpoint maximum packet size.
+ * @note The default is 256 bytes for both the transmission and receive
+ * buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE 256
+#endif
+
+/**
+ * @brief Serial over USB number of buffers.
+ * @note The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER 2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT FALSE
+#endif
+
+/**
+ * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT FALSE
+#endif
+
+#endif /* HALCONF_H */
+
+/** @} */
diff --git a/demos/AVR/NIL-DIGISPARK-ATTINY-167/main.c b/demos/AVR/NIL-DIGISPARK-ATTINY-167/main.c new file mode 100644 index 000000000..0ecf9eb35 --- /dev/null +++ b/demos/AVR/NIL-DIGISPARK-ATTINY-167/main.c @@ -0,0 +1,91 @@ +/*
+ ChibiOS - Copyright (C) 2016..2017 Theodore Ateba
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#include "hal.h"
+#include "ch.h"
+
+/*
+ * UART 1 configuration structure.
+ */
+const UARTConfig uartConf = {
+ NULL, /* UART transmission buffer callback. */
+ NULL, /* UART physical end of transmission callback. */
+ NULL, /* UART Receiver receiver filled callback. */
+ NULL, /* UART caracter received callback. */
+ NULL, /* UART received error callback. */
+ 38400, /* UART baudrate. */
+};
+
+THD_WORKING_AREA(waThread1, 32);
+THD_FUNCTION(Thread1, arg) {
+
+ (void)arg;
+
+ while (true) {
+ palTogglePad(IOPORT2, PORTB_LED1);
+ uartStartSend(&UARTD1, 30, (const void *) "ChibiOS PORT on ATtiny-167!.\n\r");
+ chThdSleepMilliseconds(1000);
+ }
+}
+
+/*
+ * Threads static table, one entry per thread. The number of entries must
+ * match NIL_CFG_NUM_THREADS.
+ */
+THD_TABLE_BEGIN
+ THD_TABLE_ENTRY(waThread1, "blinker", Thread1, NULL)
+THD_TABLE_END
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+ /*
+ * System initializations.
+ * - HAL initialization, this also initializes the configured device drivers
+ * and performs the board-specific initializations.
+ * - Kernel initialization, the main() function becomes a thread and the
+ * RTOS is active.
+ */
+ halInit();
+ chSysInit();
+
+ /*
+ * Initialize the UART interface.
+ */
+ uartInit();
+
+ /*
+ * Start the Uart 1 interface.
+ */
+ uartStart(&UARTD1, &uartConf);
+
+ /*
+ * Send an message via the UART 1 interface.
+ */
+ uartStartSend(&UARTD1, 15, (const void *) "Hello world!.\n\r");
+
+ /*
+ * This is now the idle thread loop, you may perform here a low priority
+ * task but you must never try to sleep or wait in this loop. Note that
+ * this tasks runs at the lowest priority level so any instruction added
+ * here will be executed after all other tasks have been started.
+ */
+ while (true) {
+ }
+}
+
diff --git a/demos/AVR/NIL-DIGISPARK-ATTINY-167/mcuconf.h b/demos/AVR/NIL-DIGISPARK-ATTINY-167/mcuconf.h new file mode 100644 index 000000000..130c6f71e --- /dev/null +++ b/demos/AVR/NIL-DIGISPARK-ATTINY-167/mcuconf.h @@ -0,0 +1,121 @@ +/* + ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef MCUCONF_H +#define MCUCONF_H + +/* + * AVR drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the driver + * is enabled in halconf.h. + */ + +/* + * ADC driver system settings. + */ +#define AVR_ADC_USE_ADC1 FALSE + +/* + * EXT drivers system settings. + */ +#define AVR_EXT_USE_INT0 FALSE +#define AVR_EXT_USE_INT1 FALSE +#define AVR_EXT_USE_INT2 FALSE +#define AVR_EXT_USE_INT3 FALSE +#define AVR_EXT_USE_INT4 FALSE +#define AVR_EXT_USE_INT5 FALSE + +/* + * PCINT driver system settings. + */ +#define AVR_EXT_USE_PCINT0 FALSE +#define AVR_EXT_USE_PCINT1 FALSE +#define AVR_EXT_USE_PCINT2 FALSE +#define AVR_EXT_USE_PCINT3 FALSE +#define AVR_EXT_USE_PCINT4 FALSE +#define AVR_EXT_USE_PCINT5 FALSE +#define AVR_EXT_USE_PCINT6 FALSE +#define AVR_EXT_USE_PCINT7 FALSE +#define AVR_EXT_USE_PCINT8 FALSE +#define AVR_EXT_USE_PCINT9 FALSE +#define AVR_EXT_USE_PCINT10 FALSE + +/* + * CAN driver system settings. + */ + +/* + * MAC driver system settings. + */ + +/* + * PWM driver system settings. + */ +#define AVR_PWM_USE_TIM1 FALSE +#define AVR_PWM_USE_TIM2 FALSE +#define AVR_PWM_USE_TIM3 FALSE +#define AVR_PWM_USE_TIM4 FALSE +#define AVR_PWM_USE_TIM5 FALSE + +/* + * ICU driver system settings. + */ +#define AVR_ICU_USE_TIM1 FALSE +#define AVR_ICU_USE_TIM3 FALSE +#define AVR_ICU_USE_TIM4 FALSE +#define AVR_ICU_USE_TIM5 FALSE + +/* + * GPT driver system settings. + */ +#define AVR_GPT_USE_TIM1 FALSE +#define AVR_GPT_USE_TIM2 FALSE +#define AVR_GPT_USE_TIM3 FALSE +#define AVR_GPT_USE_TIM4 FALSE +#define AVR_GPT_USE_TIM5 FALSE + +/* + * UART driver system settings. + */ +#define AVR_UART_USE_USART1 TRUE +#define AVR_UART_USE_USART2 FALSE + +/* + * SERIAL driver system settings. + */ +#define AVR_SERIAL_USE_USART0 FALSE +#define AVR_SERIAL_USE_USART1 FALSE + +/* + * I2C driver system settings. + */ +#define AVR_I2C_USE_I2C1 FALSE + +/* + * SPI driver system settings. + */ +#define AVR_SPI_USE_SPI1 FALSE +#define AVR_SPI_USE_16BIT_POLLED_EXCHANGE FALSE + +/* + * USB driver system settings. + */ +#define AVR_USB_USE_USB1 FALSE +#define AVR_USB_USE_NAMED_ADDRESS_SPACES FALSE + +#endif /* MCUCONF_H */ diff --git a/os/common/ports/AVR/chcore.c b/os/common/ports/AVR/chcore.c index ca70ccc5f..77f6ace9f 100644 --- a/os/common/ports/AVR/chcore.c +++ b/os/common/ports/AVR/chcore.c @@ -150,7 +150,12 @@ void _port_thread_start(void) { asm volatile ("movw r24, r4");
asm volatile ("movw r30, r2");
asm volatile ("icall");
- asm volatile ("call chSysHalt");
+#if defined(_CHIBIOS_RT_)
+ asm volatile ("call chThdExit"); /* Used for avr5 Architecture. */
+#endif
+#if defined(_CHIBIOS_NIL_)
+ asm volatile ("call chSysHalt"); /* Used for avr5 Architecture. */
+#endif
}
/** @} */
diff --git a/os/hal/boards/DIGISPARK_ATTINY_167/board.c b/os/hal/boards/DIGISPARK_ATTINY_167/board.c new file mode 100644 index 000000000..aab4dbd85 --- /dev/null +++ b/os/hal/boards/DIGISPARK_ATTINY_167/board.c @@ -0,0 +1,72 @@ +/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#include "hal.h"
+
+/**
+ * @brief PAL setup.
+ * @details Digital I/O ports static configuration as defined in @p board.h.
+ * This variable is used by the HAL when initializing the PAL driver.
+ */
+#if HAL_USE_PAL || defined(__DOXYGEN__)
+const PALConfig pal_default_config =
+{
+#if defined(PORTA)
+ {VAL_PORTA, VAL_DDRA},
+#endif
+#if defined(PORTB)
+ {VAL_PORTB, VAL_DDRB},
+#endif
+#if defined(PORTC)
+ {VAL_PORTC, VAL_DDRC},
+#endif
+#if defined(PORTD)
+ {VAL_PORTD, VAL_DDRD},
+#endif
+#if defined(PORTE)
+ {VAL_PORTE, VAL_DDRE},
+#endif
+#if defined(PORTF)
+ {VAL_PORTF, VAL_DDRF},
+#endif
+#if defined(PORTG)
+ {VAL_PORTG, VAL_DDRG},
+#endif
+#if defined(PORTH)
+ {VAL_PORTH, VAL_DDRH},
+#endif
+#if defined(PORTJ)
+ {VAL_PORTJ, VAL_DDRJ},
+#endif
+#if defined(PORTK)
+ {VAL_PORTK, VAL_DDRK},
+#endif
+#if defined(PORTL)
+ {VAL_PORTL, VAL_DDRL},
+#endif
+};
+#endif /* HAL_USE_PAL */
+
+/**
+ * Board-specific initialization code.
+ */
+void boardInit(void) {
+
+ /*
+ * External interrupts setup, all disabled initially.
+ */
+ cli();
+}
diff --git a/os/hal/boards/DIGISPARK_ATTINY_167/board.h b/os/hal/boards/DIGISPARK_ATTINY_167/board.h new file mode 100644 index 000000000..f142eca53 --- /dev/null +++ b/os/hal/boards/DIGISPARK_ATTINY_167/board.h @@ -0,0 +1,49 @@ +/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#ifndef BOARD_H
+#define BOARD_H
+
+/*
+ * Setup for the Digispark ATtiny 167 board.
+ */
+
+/*
+ * Board identifier.
+ */
+#define BOARD_NAME "Digispark Pro board ATtiny167"
+
+/* All inputs. */
+#define VAL_DDRA 0x00
+#define VAL_PORTA 0xFF
+
+/* All inputs except PB1 which has a LED connected. */
+#define VAL_DDRB 0x02
+#define VAL_PORTB 0xFF
+
+#define PORTB_LED1 1
+
+#if !defined(_FROM_ASM_)
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void boardInit(void);
+#ifdef __cplusplus
+}
+#endif
+#endif /* _FROM_ASM_ */
+
+#endif /* BOARD_H */
diff --git a/os/hal/boards/DIGISPARK_ATTINY_167/board.mk b/os/hal/boards/DIGISPARK_ATTINY_167/board.mk new file mode 100644 index 000000000..75cb1749b --- /dev/null +++ b/os/hal/boards/DIGISPARK_ATTINY_167/board.mk @@ -0,0 +1,5 @@ +# List of all the board related files.
+BOARDSRC = ${CHIBIOS}/os/hal/boards/DIGISPARK_ATTINY_167/board.c
+
+# Required include directories
+BOARDINC = ${CHIBIOS}/os/hal/boards/DIGISPARK_ATTINY_167
diff --git a/os/hal/ports/AVR/TINY/GPIOv1/driver.mk b/os/hal/ports/AVR/TINY/GPIOv1/driver.mk new file mode 100644 index 000000000..6675bfaf9 --- /dev/null +++ b/os/hal/ports/AVR/TINY/GPIOv1/driver.mk @@ -0,0 +1,9 @@ +ifeq ($(USE_SMART_BUILD),yes)
+ifneq ($(findstring HAL_USE_PAL TRUE,$(HALCONF)),)
+PLATFORMSRC += ${CHIBIOS}/os/hal/ports/AVR/TINY/GPIOv1/hal_pal_lld.c
+endif
+else
+PLATFORMSRC += ${CHIBIOS}/os/hal/ports/AVR/TINY/GPIOv1/hal_pal_lld.c
+endif
+
+PLATFORMINC += ${CHIBIOS}/os/hal/ports/AVR/TINY/GPIOv1
diff --git a/os/hal/ports/AVR/TINY/GPIOv1/hal_pal_lld.c b/os/hal/ports/AVR/TINY/GPIOv1/hal_pal_lld.c new file mode 100644 index 000000000..142247ce6 --- /dev/null +++ b/os/hal/ports/AVR/TINY/GPIOv1/hal_pal_lld.c @@ -0,0 +1,156 @@ +/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file hal_pal_lld.c
+ * @brief AVR GPIO low level driver code.
+ *
+ * @addtogroup PAL
+ * @{
+ */
+
+#include "hal.h"
+
+#if HAL_USE_PAL || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief AVR GPIO ports configuration.
+ * @details GPIO registers initialization.
+ *
+ * @param[in] config the AVR ports configuration
+ *
+ * @notapi
+ */
+void _pal_lld_init(const PALConfig *config) {
+
+#if defined(PORTA) || defined(__DOXYGEN__)
+ PORTA = config->porta.out;
+ DDRA = config->porta.dir;
+#endif
+
+#if defined(PORTB) || defined(__DOXYGEN__)
+ PORTB = config->portb.out;
+ DDRB = config->portb.dir;
+#endif
+
+#if defined(PORTC) || defined(__DOXYGEN__)
+ PORTC = config->portc.out;
+ DDRC = config->portc.dir;
+#endif
+
+#if defined(PORTD) || defined(__DOXYGEN__)
+ PORTD = config->portd.out;
+ DDRD = config->portd.dir;
+#endif
+
+#if defined(PORTE) || defined(__DOXYGEN__)
+ PORTE = config->porte.out;
+ DDRE = config->porte.dir;
+#endif
+
+#if defined(PORTF) || defined(__DOXYGEN__)
+ PORTF = config->portf.out;
+ DDRF = config->portf.dir;
+#endif
+
+#if defined(PORTG) || defined(__DOXYGEN__)
+ PORTG = config->portg.out;
+ DDRG = config->portg.dir;
+#endif
+
+#if defined(PORTH) || defined(__DOXYGEN__)
+ PORTH = config->porth.out;
+ DDRH = config->porth.dir;
+#endif
+
+#if defined(PORTJ) || defined(__DOXYGEN__)
+ PORTJ = config->portj.out;
+ DDRJ = config->portj.dir;
+#endif
+
+#if defined(PORTK) || defined(__DOXYGEN__)
+ PORTK = config->portk.out;
+ DDRK = config->portk.dir;
+#endif
+
+#if defined(PORTL) || defined(__DOXYGEN__)
+ PORTL = config->portl.out;
+ DDRL = config->portl.dir;
+#endif
+}
+
+/**
+ * @brief Pads mode setup.
+ * @details This function programs a pads group belonging to the same port
+ * with the specified mode.
+ *
+ * @param[in] port the port identifier
+ * @param[in] mask the group mask
+ * @param[in] mode the mode
+ *
+ * @note This function is not meant to be invoked directly by the application
+ * code.
+ * @note @p PAL_MODE_UNCONNECTED is implemented as output as recommended by
+ * the AVR Family User's Guide. Unconnected pads are set to input
+ * with pull-up by default.
+ *
+ * @notapi
+ */
+void _pal_lld_setgroupmode(ioportid_t port,
+ ioportmask_t mask,
+ iomode_t mode) {
+
+ switch (mode) {
+ case PAL_MODE_RESET:
+ case PAL_MODE_INPUT:
+ case PAL_MODE_INPUT_ANALOG:
+ port->dir &= ~mask;
+ port->out &= ~mask;
+ break;
+ case PAL_MODE_UNCONNECTED:
+ case PAL_MODE_INPUT_PULLUP:
+ port->dir &= ~mask;
+ port->out |= mask;
+ break;
+ case PAL_MODE_OUTPUT_PUSHPULL:
+ port->dir |= mask;
+ break;
+ }
+}
+
+#endif /* HAL_USE_PAL */
+
+/** @} */
diff --git a/os/hal/ports/AVR/TINY/GPIOv1/hal_pal_lld.h b/os/hal/ports/AVR/TINY/GPIOv1/hal_pal_lld.h new file mode 100644 index 000000000..68694f9b0 --- /dev/null +++ b/os/hal/ports/AVR/TINY/GPIOv1/hal_pal_lld.h @@ -0,0 +1,331 @@ +/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file hal_pal_lld.h
+ * @brief AVR GPIO low level driver header.
+ *
+ * @addtogroup PAL
+ * @{
+ */
+
+#ifndef HAL_PAL_LLD_H
+#define HAL_PAL_LLD_H
+
+#include "avr_pins.h"
+
+#if HAL_USE_PAL || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Unsupported modes and specific modes. */
+/*===========================================================================*/
+
+#undef PAL_MODE_INPUT_PULLDOWN
+#undef PAL_MODE_OUTPUT_OPENDRAIN
+
+/*===========================================================================*/
+/* I/O Ports Types and constants. */
+/*===========================================================================*/
+
+/**
+ * @brief Width, in bits, of an I/O port.
+ */
+#define PAL_IOPORTS_WIDTH 8
+
+/**
+ * @brief Whole port mask.
+ * @details This macro specifies all the valid bits into a port.
+ */
+#define PAL_WHOLE_PORT ((ioportmask_t)0xFF)
+
+/**
+ * @brief AVR setup registers.
+ */
+typedef struct {
+ uint8_t out;
+ uint8_t dir;
+} avr_gpio_setup_t;
+
+/**
+ * @brief AVR registers block.
+ * @note On some devices registers do not follow this layout on some
+ * ports, the ports with abnormal layout cannot be used through
+ * PAL driver. Example: PORT F on Mega128.
+ */
+typedef struct {
+ volatile uint8_t in;
+ volatile uint8_t dir;
+ volatile uint8_t out;
+} avr_gpio_registers_t;
+
+/**
+ * @brief Generic I/O ports static initializer.
+ * @details An instance of this structure must be passed to @p palInit() at
+ * system startup time in order to initialized the digital I/O
+ * subsystem. This represents only the initial setup, specific pads
+ * or whole ports can be reprogrammed at later time.
+ */
+typedef struct {
+#if defined(PORTA) || defined(__DOXYGEN__)
+ avr_gpio_setup_t porta;
+#endif
+#if defined(PORTB) || defined(__DOXYGEN__)
+ avr_gpio_setup_t portb;
+#endif
+#if defined(PORTC) || defined(__DOXYGEN__)
+ avr_gpio_setup_t portc;
+#endif
+#if defined(PORTD) || defined(__DOXYGEN__)
+ avr_gpio_setup_t portd;
+#endif
+#if defined(PORTE) || defined(__DOXYGEN__)
+ avr_gpio_setup_t porte;
+#endif
+#if defined(PORTF) || defined(__DOXYGEN__)
+ avr_gpio_setup_t portf;
+#endif
+#if defined(PORTG) || defined(__DOXYGEN__)
+ avr_gpio_setup_t portg;
+#endif
+#if defined(PORTH) || defined(__DOXYGEN__)
+ avr_gpio_setup_t porth;
+#endif
+#if defined(PORTJ) || defined(__DOXYGEN__)
+ avr_gpio_setup_t portj;
+#endif
+#if defined(PORTK) || defined(__DOXYGEN__)
+ avr_gpio_setup_t portk;
+#endif
+#if defined(PORTL) || defined(__DOXYGEN__)
+ avr_gpio_setup_t portl;
+#endif
+} PALConfig;
+
+/**
+ * @brief Digital I/O port sized unsigned type.
+ */
+typedef uint8_t ioportmask_t;
+
+/**
+ * @brief Digital I/O modes.
+ */
+typedef uint8_t iomode_t;
+
+/**
+ * @brief Port Identifier.
+ * @details This type can be a scalar or some kind of pointer, do not make
+ * any assumption about it, use the provided macros when populating
+ * variables of this type.
+ */
+typedef volatile avr_gpio_registers_t * ioportid_t;
+
+/*===========================================================================*/
+/* I/O Ports Identifiers. */
+/*===========================================================================*/
+
+#if defined(PORTA) || defined(__DOXYGEN__)
+/**
+ * @brief GPIO port A identifier.
+ */
+#define IOPORT1 ((volatile avr_gpio_registers_t *)&PINA)
+#endif
+
+#if defined(PORTB) || defined(__DOXYGEN__)
+/**
+ * @brief GPIO port B identifier.
+ */
+#define IOPORT2 ((volatile avr_gpio_registers_t *)&PINB)
+#endif
+
+#if defined(PORTC) || defined(__DOXYGEN__)
+/**
+ * @brief GPIO port C identifier.
+ */
+#define IOPORT3 ((volatile avr_gpio_registers_t *)&PINC)
+#endif
+
+#if defined(PORTD) || defined(__DOXYGEN__)
+/**
+ * @brief GPIO port D identifier.
+ */
+#define IOPORT4 ((volatile avr_gpio_registers_t *)&PIND)
+#endif
+
+#if defined(PORTE) || defined(__DOXYGEN__)
+/**
+ * @brief GPIO port E identifier.
+ */
+#define IOPORT5 ((volatile avr_gpio_registers_t *)&PINE)
+#endif
+
+#if defined(PORTF) || defined(__DOXYGEN__)
+/**
+ * @brief GPIO port F identifier.
+ */
+#define IOPORT6 ((volatile avr_gpio_registers_t *)&PINF)
+#endif
+
+#if defined(PORTG) || defined(__DOXYGEN__)
+/**
+ * @brief GPIO port G identifier.
+ */
+#define IOPORT7 ((volatile avr_gpio_registers_t *)&PING)
+#endif
+
+#if defined(PORTH) || defined(__DOXYGEN__)
+/**
+ * @brief GPIO port H identifier.
+ */
+#define IOPORT8 ((volatile avr_gpio_registers_t *)&PINH)
+#endif
+
+#if defined(PORTJ) || defined(__DOXYGEN__)
+/**
+ * @brief GPIO port J identifier.
+ */
+#define IOPORT9 ((volatile avr_gpio_registers_t *)&PINJ)
+#endif
+
+#if defined(PORTK) || defined(__DOXYGEN__)
+/**
+ * @brief GPIO port K identifier.
+ */
+#define IOPORT10 ((volatile avr_gpio_registers_t *)&PINK)
+#endif
+
+#if defined(PORTL) || defined(__DOXYGEN__)
+/**
+ * @brief GPIO port L identifier.
+ */
+#define IOPORT11 ((volatile avr_gpio_registers_t *)&PINL)
+#endif
+
+#if defined(PORTADC) || defined(__DOXYGEN__)
+/**
+ * @brief GPIO port ADC identifier.
+ */
+#define IOPORTADC ((volatile avr_gpio_registers_t *)&PINADC)
+#endif
+
+#if defined(PORT_SPI1) || defined(__DOXYGEN__)
+/**
+ * @brief GPIO port SPI1 identifier.
+ */
+#define IOPORTSPI1 ((volatile avr_gpio_registers_t *)&PIN_SPI1)
+#endif
+
+/*===========================================================================*/
+/* Implementation, some of the following macros could be implemented as */
+/* functions, if so please put them in hal_pal_lld.c. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level PAL subsystem initialization.
+ *
+ * @param[in] config the architecture-dependent ports configuration
+ *
+ * @notapi
+ */
+#define pal_lld_init(config) _pal_lld_init(config)
+
+/**
+ * @brief Reads the physical I/O port states.
+ *
+ * @param[in] port port identifier
+ * @return The port bits.
+ *
+ * @notapi
+ */
+#define pal_lld_readport(port) ((port)->in)
+
+/**
+ * @brief Reads the output latch.
+ * @details The purpose of this function is to read back the latched output
+ * value.
+ *
+ * @param[in] port port identifier
+ * @return The latched logical states.
+ *
+ * @notapi
+ */
+#define pal_lld_readlatch(port) ((port)->out)
+
+/**
+ * @brief Writes a bits mask on a I/O port.
+ *
+ * @param[in] port port identifier
+ * @param[in] bits bits to be written on the specified port
+ *
+ * @notapi
+ */
+#define pal_lld_writeport(port, bits) ((port)->out = bits)
+
+/**
+ * @brief Pads group mode setup.
+ * @details This function programs a pads group belonging to the same port
+ * with the specified mode.
+ * @note Programming an unknown or unsupported mode is silently ignored.
+ *
+ * @param[in] port port identifier
+ * @param[in] mask group mask
+ * @param[in] offset group bit offset within the port
+ * @param[in] mode group mode
+ *
+ * @notapi
+ */
+#define pal_lld_setgroupmode(port, mask, offset, mode) \
+ _pal_lld_setgroupmode(port, mask << offset, mode)
+
+/**
+ * @brief Sets a pad logical state to @p PAL_HIGH.
+ *
+ * @param[in] port port identifier
+ * @param[in] pad pad number within the port
+ *
+ * @notapi
+ */
+#define pal_lld_setpad(port, pad) \
+ port->out |= _BV(pad)
+
+/**
+ * @brief Clears a pad logical state to @p PAL_LOW.
+ *
+ * @param[in] port port identifier
+ * @param[in] pad pad number within the port
+ *
+ * @notapi
+ */
+#define pal_lld_clearpad(port, pad) \
+ port->out &= ~_BV(pad)
+
+extern ROMCONST PALConfig pal_default_config;
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void _pal_lld_init(const PALConfig *config);
+ void _pal_lld_setgroupmode(ioportid_t port,
+ ioportmask_t mask,
+ iomode_t mode);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_PAL */
+
+#endif /* HAL_PAL_LLD_H */
+
+/** @} */
diff --git a/os/hal/ports/AVR/TINY/TIMv1/driver.mk b/os/hal/ports/AVR/TINY/TIMv1/driver.mk new file mode 100644 index 000000000..982db5635 --- /dev/null +++ b/os/hal/ports/AVR/TINY/TIMv1/driver.mk @@ -0,0 +1,19 @@ +PLATFORMSRC += $(CHIBIOS)/os/hal/ports/AVR/TINY/TIMv1/hal_st_lld.c
+
+ifeq ($(USE_SMART_BUILD),yes)
+ifneq ($(findstring HAL_USE_GPT TRUE,$(HALCONF)),)
+PLATFORMSRC += $(CHIBIOS)/os/hal/ports/AVR/TINY/TIMv1/hal_gpt_lld.c
+endif
+ifneq ($(findstring HAL_USE_ICU TRUE,$(HALCONF)),)
+PLATFORMSRC += $(CHIBIOS)/os/hal/ports/AVR/TINY/TIMv1/hal_icu_lld.c
+endif
+ifneq ($(findstring HAL_USE_PWM TRUE,$(HALCONF)),)
+PLATFORMSRC += $(CHIBIOS)/os/hal/ports/AVR/TINY/TIMv1/hal_pwm_lld.c
+endif
+else
+PLATFORMSRC += $(CHIBIOS)/os/hal/ports/AVR/TINY/TIMv1/hal_gpt_lld.c
+PLATFORMSRC += $(CHIBIOS)/os/hal/ports/AVR/TINY/TIMv1/hal_icu_lld.c
+PLATFORMSRC += $(CHIBIOS)/os/hal/ports/AVR/TINY/TIMv1/hal_pwm_lld.c
+endif
+
+PLATFORMINC += $(CHIBIOS)/os/hal/ports/AVR/TINY/TIMv1
diff --git a/os/hal/ports/AVR/TINY/TIMv1/hal_gpt_lld.c b/os/hal/ports/AVR/TINY/TIMv1/hal_gpt_lld.c new file mode 100644 index 000000000..6ccc7cadd --- /dev/null +++ b/os/hal/ports/AVR/TINY/TIMv1/hal_gpt_lld.c @@ -0,0 +1,373 @@ +/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/*
+ This driver is based on the work done by Matteo Serva available at
+ http://github.com/matteoserva/ChibiOS-AVR
+*/
+
+/**
+ * @file hal_gpt_lld.c
+ * @brief AVR GPT driver subsystem low level driver.
+ *
+ * @addtogroup GPT
+ * @{
+ */
+
+#include "hal.h"
+
+#if HAL_USE_GPT || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+#define PRESCALER_SIZE_BASE 5
+#define PRESCALER_SIZE_EXTENDED 7
+
+// FIXME: could use better names here!
+typedef struct {
+ volatile uint8_t *tccra;
+ volatile uint8_t *tccrb;
+ volatile uint8_t *ocr1;
+ volatile uint8_t *ocr2;
+ volatile uint8_t *tcnt1;
+ volatile uint8_t *tcnt2;
+ volatile uint8_t *tifr;
+ volatile uint8_t *timsk;
+} timer_registers_t;
+
+const timer_registers_t regs_table[] = {
+#if AVR_GPT_USE_TIM1 || defined(__DOXYGEN__)
+ { &TCCR1A, &TCCR1B, &OCR1AH, &OCR1AL, &TCNT1H, &TCNT1L, &TIFR1, &TIMSK1 },
+#endif
+#if AVR_GPT_USE_TIM2 || defined(__DOXYGEN__)
+ { &TCCR2A, &TCCR2B, &OCR2A, &OCR2A, &TCNT2, &TCNT2, &TIFR2, &TIMSK2 },
+#endif
+#if AVR_GPT_USE_TIM3 || defined(__DOXYGEN__)
+ { &TCCR3A, &TCCR3B, &OCR3AH, &OCR3AL, &TCNT3H, &TCNT3L, &TIFR3, &TIMSK3 },
+#endif
+#if AVR_GPT_USE_TIM4 || defined(__DOXYGEN__)
+ { &TCCR4A, &TCCR4B, &OCR4AH, &OCR4AL, &TCNT4H, &TCNT4L, &TIFR4, &TIMSK4 },
+#endif
+#if AVR_GPT_USE_TIM5 || defined(__DOXYGEN__)
+ { &TCCR5A, &TCCR5B, &OCR5AH, &OCR5AL, &TCNT5H, &TCNT5L, &TIFR5, &TIMSK5 },
+#endif
+};
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+#if AVR_GPT_USE_TIM1 || defined(__DOXYGEN__)
+GPTDriver GPTD1;
+#endif
+#if AVR_GPT_USE_TIM2 || defined(__DOXYGEN__)
+GPTDriver GPTD2;
+#endif
+#if AVR_GPT_USE_TIM3 || defined(__DOXYGEN__)
+GPTDriver GPTD3;
+#endif
+#if AVR_GPT_USE_TIM4 || defined(__DOXYGEN__)
+GPTDriver GPTD4;
+#endif
+#if AVR_GPT_USE_TIM5 || defined(__DOXYGEN__)
+GPTDriver GPTD5;
+#endif
+
+/*===========================================================================*/
+/* Driver local variables. */
+/*===========================================================================*/
+
+static uint16_t ratio_base[] = { 1024, 256, 64, 8, 1 };
+static uint8_t clock_source_base[]= { 5, 4, 3, 2, 1 };
+//static uint16_t ratio_extended[] = { 1024, 256, 128, 64, 32, 8, 1 };
+//static uint8_t clock_source_extended[] = { 7, 6, 5, 4, 3, 2, 1 };
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+static uint8_t prescaler(uint16_t freq, uint16_t *ratio, uint8_t n) {
+ uint8_t i;
+
+ for (i = 0; i < n; ++i) {
+ uint32_t result = F_CPU / ratio[i] / freq;
+ if (result > 256UL)
+ return i - 1;
+ if ((result * ratio[i] * freq) == F_CPU)
+ return i;
+ }
+ return -1; // TO check
+}
+
+static void gpt_lld_serve_interrupt(GPTDriver *gptp) {
+ gptp->counter++;
+ if (gptp->counter == gptp->period) {
+ gptp->counter = 0;
+ if (gptp->state == GPT_ONESHOT) {
+ gptp->state = GPT_READY; /* Back in GPT_READY state. */
+ gpt_lld_stop_timer(gptp); /* Timer automatically stopped. */
+ }
+ gptp->callback(gptp);
+ }
+}
+
+static void gpt_lld_dummy_callback(GPTDriver *gptp) {
+}
+
+static uint8_t getTimerIndex(GPTDriver *gptp) {
+ uint8_t index = 0;
+#if AVR_GPT_USE_TIM1 || defined(__DOXYGEN__)
+ if (gptp == &GPTD1) return index;
+ else index++;
+#endif
+#if AVR_GPT_USE_TIM2 || defined(__DOXYGEN__)
+ if (gptp == &GPTD2) return index;
+ else index++;
+#endif
+#if AVR_GPT_USE_TIM3 || defined(__DOXYGEN__)
+ if (gptp == &GPTD3) return index;
+ else index++;
+#endif
+#if AVR_GPT_USE_TIM4 || defined(__DOXYGEN__)
+ if (gptp == &GPTD4) return index;
+ else index++;
+#endif
+#if AVR_GPT_USE_TIM5 || defined(__DOXYGEN__)
+ if (gptp == &GPTD5) return index;
+ else index++;
+#endif
+ return -1; // To check
+}
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+#if AVR_GPT_USE_TIM1 || defined(__DOXYGEN__)
+/**
+ * @brief TIM1 interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(TIMER1_COMPA_vect) {
+
+ OSAL_IRQ_PROLOGUE();
+ gpt_lld_serve_interrupt(&GPTD1);
+ OSAL_IRQ_EPILOGUE();
+}
+#endif
+
+#if AVR_GPT_USE_TIM2 || defined(__DOXYGEN__)
+/**
+ * @brief TIM2 interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(TIMER2_COMPA_vect) {
+
+ OSAL_IRQ_PROLOGUE();
+ gpt_lld_serve_interrupt(&GPTD2);
+ OSAL_IRQ_EPILOGUE();
+}
+#endif
+
+#if AVR_GPT_USE_TIM3 || defined(__DOXYGEN__)
+/**
+ * @brief TIM3 interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(TIMER3_COMPA_vect) {
+
+ OSAL_IRQ_PROLOGUE();
+ gpt_lld_serve_interrupt(&GPTD3);
+ OSAL_IRQ_EPILOGUE();
+}
+#endif
+
+#if AVR_GPT_USE_TIM4 || defined(__DOXYGEN__)
+/**
+ * @brief TIM4 interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(TIMER4_COMPA_vect) {
+
+ OSAL_IRQ_PROLOGUE();
+ gpt_lld_serve_interrupt(&GPTD4);
+ OSAL_IRQ_EPILOGUE();
+}
+#endif
+
+#if AVR_GPT_USE_TIM5 || defined(__DOXYGEN__)
+/**
+ * @brief TIM2 interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(TIMER5_COMPA_vect) {
+
+ OSAL_IRQ_PROLOGUE();
+ gpt_lld_serve_interrupt(&GPTD5);
+ OSAL_IRQ_EPILOGUE();
+}
+#endif
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level GPT driver initialization.
+ *
+ * @notapi
+ */
+void gpt_lld_init(void) {
+
+#if AVR_GPT_USE_TIM1 || defined(__DOXYGEN__)
+ gptObjectInit(&GPTD1);
+#endif
+#if AVR_GPT_USE_TIM2 || defined(__DOXYGEN__)
+ gptObjectInit(&GPTD2);
+#endif
+#if AVR_GPT_USE_TIM3 || defined(__DOXYGEN__)
+ gptObjectInit(&GPTD3);
+#endif
+#if AVR_GPT_USE_TIM4 || defined(__DOXYGEN__)
+ gptObjectInit(&GPTD4);
+#endif
+#if AVR_GPT_USE_TIM5 || defined(__DOXYGEN__)
+ gptObjectInit(&GPTD5);
+#endif
+}
+
+/**
+ * @brief Configures and activates the GPT peripheral.
+ *
+ * @param[in] gptp pointer to the @p GPTDriver object
+ *
+ * @notapi
+ */
+void gpt_lld_start(GPTDriver *gptp) {
+ uint8_t psc;
+
+ if (gptp->state == GPT_STOP) {
+ /* Clock activation.*/
+ }
+
+ /* Configuration.*/
+
+#if AVR_GPT_USE_TIM2 || defined(__DOXYGEN__)
+ if (gptp == &GPTD2) {
+ psc = prescaler(gptp->config->frequency, ratio_extended, PRESCALER_SIZE_EXTENDED);
+ gptp->clock_source = clock_source_extended[psc] & 0x07;
+ TCCR2A = (1 << WGM21) | (0 << WGM20);
+ TCCR2B = (0 << WGM22);
+ OCR2A = F_CPU / ratio_extended[psc] /gptp->config->frequency - 1;
+ return;
+ }
+#endif
+
+ uint8_t i = getTimerIndex(gptp);
+ psc = prescaler(gptp->config->frequency, ratio_base, PRESCALER_SIZE_BASE);
+ gptp->clock_source = clock_source_base[psc] & 0x07;
+ *regs_table[i].tccra = (0 << WGM11) |
+ (0 << WGM10) |
+ (0 << COM1A1) |
+ (0 << COM1A0) |
+ (0 << COM1B1) |
+ (0 << COM1B0);
+ *regs_table[i].tccrb = (1 << WGM12);
+ *regs_table[i].ocr1 = 0;
+ *regs_table[i].ocr2 = F_CPU / ratio_base[psc] / gptp->config->frequency - 1;
+}
+
+/**
+ * @brief Deactivates the GPT peripheral.
+ *
+ * @param[in] gptp pointer to the @p GPTDriver object
+ *
+ * @notapi
+ */
+void gpt_lld_stop(GPTDriver *gptp) {
+
+ /* nothing to be done */
+ if (gptp->state == GPT_READY) {
+ /* Clock de-activation.*/
+ }
+ gpt_lld_stop_timer(gptp);
+}
+
+/**
+ * @brief Starts the timer in continuous mode.
+ *
+ * @param[in] gptp pointer to the @p GPTDriver object
+ * @param[in] period period in ticks
+ *
+ * @notapi
+ */
+void gpt_lld_start_timer(GPTDriver *gptp, gptcnt_t period) {
+
+ gptp->callback = gptp->config->callback;
+ gptp->period = period;
+ gptp->counter = 0;
+
+ uint8_t i = getTimerIndex(gptp);
+ *regs_table[i].tcnt1 = 0;
+ *regs_table[i].tcnt2 = 0;
+ *regs_table[i].tifr = (1 << OCF1A);
+ *regs_table[i].timsk = (1 << OCIE1A);
+ *regs_table[i].tccrb |= (gptp->clock_source << CS10);
+}
+
+/**
+ * @brief Stops the timer.
+ *
+ * @param[in] gptp pointer to the @p GPTDriver object
+ *
+ * @notapi
+ */
+void gpt_lld_stop_timer(GPTDriver *gptp) {
+ uint8_t i = getTimerIndex(gptp);
+
+ *regs_table[i].tccrb &= ~((7 << CS10) | (1 << OCIE1A));
+ *regs_table[i].tifr = (1 << OCF1A);
+}
+
+/**
+ * @brief Starts the timer in one shot mode and waits for completion.
+ * @details This function specifically polls the timer waiting for completion
+ * in order to not have extra delays caused by interrupt servicing,
+ * this function is only recommended for short delays.
+ *
+ * @param[in] gptp pointer to the @p GPTDriver object
+ * @param[in] interval time interval in ticks
+ *
+ * @notapi
+ */
+void gpt_lld_polled_delay(GPTDriver *gptp, gptcnt_t interval) {
+
+ gptp->callback = gpt_lld_dummy_callback;
+ gpt_lld_start_timer(gptp, interval);
+ //FIX
+ while (gptp->state != GPT_READY) {}
+}
+
+#endif /* HAL_USE_GPT */
+
+/** @} */
diff --git a/os/hal/ports/AVR/TINY/TIMv1/hal_gpt_lld.h b/os/hal/ports/AVR/TINY/TIMv1/hal_gpt_lld.h new file mode 100644 index 000000000..0cd26e662 --- /dev/null +++ b/os/hal/ports/AVR/TINY/TIMv1/hal_gpt_lld.h @@ -0,0 +1,221 @@ +/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/*
+ This driver is based on the work done by Matteo Serva available at
+ http://github.com/matteoserva/ChibiOS-AVR
+*/
+
+/**
+ * @file hal_gpt_lld.h
+ * @brief AVR GPT driver subsystem low level driver header.
+ *
+ * @addtogroup GPT
+ * @{
+ */
+
+#ifndef HAL_GPT_LLD_H
+#define HAL_GPT_LLD_H
+
+#if HAL_USE_GPT || defined(__DOXYGEN__)
+
+#include "avr_timers.h"
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @brief GPT1 driver enable switch.
+ * @details If set to @p TRUE the support for GPT1 is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(AVR_GPT_USE_TIM1)
+#define AVR_GPT_USE_TIM1 FALSE
+#endif
+
+/**
+ * @brief GPT2 driver enable switch.
+ * @details If set to @p TRUE the support for GPT2 is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(AVR_GPT_USE_TIM2)
+#define AVR_GPT_USE_TIM2 FALSE
+#endif
+
+/**
+ * @brief GPT3 driver enable switch.
+ * @details If set to @p TRUE the support for GPT3 is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(AVR_GPT_USE_TIM3)
+#define AVR_GPT_USE_TIM3 FALSE
+#endif
+
+/**
+ * @brief GPT4 driver enable switch.
+ * @details If set to @p TRUE the support for GPT4 is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(AVR_GPT_USE_TIM4)
+#define AVR_GPT_USE_TIM4 FALSE
+#endif
+
+/**
+ * @brief GPT5 driver enable switch.
+ * @details If set to @p TRUE the support for GPT5 is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(AVR_GPT_USE_TIM5)
+#define AVR_GPT_USE_TIM5 FALSE
+#endif
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief GPT frequency type.
+ */
+typedef uint32_t gptfreq_t;
+
+/**
+ * @brief GPT counter type.
+ */
+typedef uint16_t gptcnt_t;
+
+/**
+ * @brief Driver configuration structure.
+ * @note It could be empty on some architectures.
+ */
+typedef struct {
+ /**
+ * @brief Timer clock in Hz.
+ * @note The low level can use assertions in order to catch invalid
+ * frequency specifications.
+ */
+ gptfreq_t frequency;
+ /**
+ * @brief Timer callback pointer.
+ * @note This callback is invoked on GPT counter events.
+ */
+ gptcallback_t callback;
+ /* End of the mandatory fields.*/
+} GPTConfig;
+
+/**
+ * @brief Structure representing a GPT driver.
+ */
+struct GPTDriver {
+ /**
+ * @brief Driver state.
+ */
+ volatile gptstate_t state;
+ /**
+ * @brief Current configuration data.
+ */
+ const GPTConfig *config;
+
+#if defined(GPT_DRIVER_EXT_FIELDS)
+ GPT_DRIVER_EXT_FIELDS
+#endif
+
+ /* End of the mandatory fields.*/
+ /**
+ * @brief input clock from prescaler
+ */
+ uint8_t clock_source;
+ /**
+ * @brief Lenght of the period in clock ticks
+ */
+ gptcnt_t period;
+ /**
+ * @brief Current clock tick.
+ */
+ gptcnt_t counter;
+ /**
+ * @brief Function called from the interrupt service routine
+ */
+ gptcallback_t callback;
+};
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/**
+ * @brief Changes the interval of GPT peripheral.
+ * @details This function changes the interval of a running GPT unit.
+ * @pre The GPT unit must have been activated using @p gptStart().
+ * @pre The GPT unit must have been running in continuous mode using
+ * @p gptStartContinuous().
+ * @post The GPT unit interval is changed to the new value.
+ * @note The function has effect at the next cycle start.
+ *
+ * @param[in] gptp pointer to a @p GPTDriver object
+ * @param[in] interval new cycle time in timer ticks
+ * @notapi
+ */
+
+// FIXME: placeholder to enable compile, should be implemented!
+#define gpt_lld_change_interval(gptp, interval)
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#if AVR_GPT_USE_TIM1 || defined(__DOXYGEN__)
+extern GPTDriver GPTD1;
+#endif
+#if AVR_GPT_USE_TIM2 || defined(__DOXYGEN__)
+extern GPTDriver GPTD2;
+#endif
+#if AVR_GPT_USE_TIM3 || defined(__DOXYGEN__)
+extern GPTDriver GPTD3;
+#endif
+#if AVR_GPT_USE_TIM4 || defined(__DOXYGEN__)
+extern GPTDriver GPTD4;
+#endif
+#if AVR_GPT_USE_TIM5 || defined(__DOXYGEN__)
+extern GPTDriver GPTD5;
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void gpt_lld_init(void);
+ void gpt_lld_start(GPTDriver *gptp);
+ void gpt_lld_stop(GPTDriver *gptp);
+ void gpt_lld_start_timer(GPTDriver *gptp, gptcnt_t interval);
+ void gpt_lld_stop_timer(GPTDriver *gptp);
+ void gpt_lld_polled_delay(GPTDriver *gptp, gptcnt_t interval);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_GPT */
+
+#endif /* HAL_GPT_LLD_H */
+
+/** @} */
diff --git a/os/hal/ports/AVR/TINY/TIMv1/hal_icu_lld.c b/os/hal/ports/AVR/TINY/TIMv1/hal_icu_lld.c new file mode 100644 index 000000000..74ceffe64 --- /dev/null +++ b/os/hal/ports/AVR/TINY/TIMv1/hal_icu_lld.c @@ -0,0 +1,335 @@ +/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file hal_icu_lld.c
+ * @brief AVR ICU driver subsystem low level driver source.
+ *
+ * @addtogroup ICU
+ * @{
+ */
+
+#include "hal.h"
+
+#if HAL_USE_ICU || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+typedef struct {
+ volatile uint8_t *tccra;
+ volatile uint8_t *tccrb;
+ volatile uint16_t *tcnt;
+ volatile uint8_t *timsk;
+} icu_registers_t;
+
+static icu_registers_t regs_table[]=
+{
+#if AVR_ICU_USE_TIM1 || defined(__DOXYGEN__)
+ {&TCCR1A, &TCCR1B, &TCNT1, &TIMSK1},
+#endif
+#if AVR_ICU_USE_TIM3 || defined(__DOXYGEN__)
+ {&TCCR3A, &TCCR3B, &TCNT3, &TIMSK3},
+#endif
+#if AVR_ICU_USE_TIM4 || defined(__DOXYGEN__)
+ {&TCCR4A, &TCCR4B, &TCNT4, &TIMSK4},
+#endif
+#if AVR_ICU_USE_TIM5 || defined(__DOXYGEN__)
+ {&TCCR5A, &TCCR5B, &TCNT5, &TIMSK5},
+#endif
+};
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/**
+ * @brief ICU1 driver identifier.
+ */
+#if AVR_ICU_USE_TIM1 || defined(__DOXYGEN__)
+ICUDriver ICUD1;
+#endif
+/**
+ * @brief ICU3 driver identifier.
+ */
+#if AVR_ICU_USE_TIM3 || defined(__DOXYGEN__)
+ICUDriver ICUD3;
+#endif
+/**
+ * @brief ICU4 driver identifier.
+ */
+#if AVR_ICU_USE_TIM4 || defined(__DOXYGEN__)
+ICUDriver ICUD4;
+#endif
+/**
+ * @brief ICU5 driver identifier.
+ */
+#if AVR_ICU_USE_TIM5 || defined(__DOXYGEN__)
+ICUDriver ICUD5;
+#endif
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+static inline void handle_capture_isr(ICUDriver *icup,
+ volatile uint16_t *icr,
+ volatile uint8_t *tccrb,
+ volatile uint16_t *tcnt)
+{
+ uint16_t value = *icr;
+ uint8_t rising = (*tccrb & (1 << ICES1)) ? 1 : 0;
+ *tccrb ^= (1 << ICES1);
+ if ((icup->config->mode == ICU_INPUT_ACTIVE_HIGH && rising) ||
+ (icup->config->mode == ICU_INPUT_ACTIVE_LOW && !rising)) {
+ icup->width = value;
+ if (icup->config->width_cb != NULL)
+ icup->config->width_cb(icup);
+ } else {
+ icup->period = value;
+ if (icup->config->period_cb != NULL)
+ icup->config->period_cb(icup);
+ /* Reset counter at the end of every cycle */
+ *tcnt = 0;
+ }
+}
+
+static uint8_t index(ICUDriver *icup)
+{
+ uint8_t index = 0;
+#if AVR_ICU_USE_TIM1 || defined(__DOXYGEN__)
+ if (icup == &ICUD1) return index;
+ else index++;
+#endif
+#if AVR_ICU_USE_TIM3 || defined(__DOXYGEN__)
+ if (icup == &ICUD3) return index;
+ else index++;
+#endif
+#if AVR_ICU_USE_TIM4 || defined(__DOXYGEN__)
+ if (icup == &ICUD4) return index;
+ else index++;
+#endif
+#if AVR_ICU_USE_TIM5 || defined(__DOXYGEN__)
+ if (icup == &ICUD5) return index;
+ else index++;
+#endif
+}
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+#if AVR_ICU_USE_TIM1 || defined(__DOXYGEN__)
+OSAL_IRQ_HANDLER(TIMER1_CAPT_vect)
+{
+ OSAL_IRQ_PROLOGUE();
+ handle_capture_isr(&ICUD1, &ICR1, &TCCR1B, &TCNT1);
+ OSAL_IRQ_EPILOGUE();
+}
+
+OSAL_IRQ_HANDLER(TIMER1_OVF_vect)
+{
+ OSAL_IRQ_PROLOGUE();
+ ICUD1.config->overflow_cb(&ICUD1);
+ OSAL_IRQ_EPILOGUE();
+}
+#endif
+
+#if AVR_ICU_USE_TIM3 || defined(__DOXYGEN__)
+OSAL_IRQ_HANDLER(TIMER3_CAPT_vect)
+{
+ OSAL_IRQ_PROLOGUE();
+ handle_capture_isr(&ICUD3, &ICR3, &TCCR3B, &TCNT3);
+ OSAL_IRQ_EPILOGUE();
+}
+
+OSAL_IRQ_HANDLER(TIMER3_OVF_vect)
+{
+ OSAL_IRQ_PROLOGUE();
+ ICUD3.config->overflow_cb(&ICUD3);
+ OSAL_IRQ_EPILOGUE();
+}
+#endif
+
+#if AVR_ICU_USE_TIM4 || defined(__DOXYGEN__)
+OSAL_IRQ_HANDLER(TIMER4_CAPT_vect)
+{
+ OSAL_IRQ_PROLOGUE();
+ handle_capture_isr(&ICUD4, &ICR4, &TCCR4B, &TCNT4);
+ OSAL_IRQ_EPILOGUE();
+}
+
+OSAL_IRQ_HANDLER(TIMER4_OVF_vect)
+{
+ OSAL_IRQ_PROLOGUE();
+ ICUD4.config->overflow_cb(&ICUD4);
+ OSAL_IRQ_EPILOGUE();
+}
+#endif
+
+#if AVR_ICU_USE_TIM5 || defined(__DOXYGEN__)
+OSAL_IRQ_HANDLER(TIMER5_CAPT_vect)
+{
+ OSAL_IRQ_PROLOGUE();
+ handle_capture_isr(&ICUD5, &ICR5, &TCCR5B, &TCNT5);
+ OSAL_IRQ_EPILOGUE();
+}
+
+OSAL_IRQ_HANDLER(TIMER5_OVF_vect)
+{
+ OSAL_IRQ_PROLOGUE();
+ ICUD5.config->overflow_cb(&ICUD5);
+ OSAL_IRQ_EPILOGUE();
+}
+#endif
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level ICU driver initialization.
+ *
+ * @notapi
+ */
+void icu_lld_init(void) {
+
+#if AVR_ICU_USE_TIM1
+ icuObjectInit(&ICUD1);
+#endif
+#if AVR_ICU_USE_TIM3
+ icuObjectInit(&ICUD3);
+#endif
+#if AVR_ICU_USE_TIM4
+ icuObjectInit(&ICUD4);
+#endif
+#if AVR_ICU_USE_TIM5
+ icuObjectInit(&ICUD5);
+#endif
+}
+
+/**
+ * @brief Configures and activates the ICU peripheral.
+ *
+ * @param[in] icup pointer to the @p ICUDriver object
+ *
+ * @notapi
+ */
+void icu_lld_start(ICUDriver *icup) {
+
+ if (icup->state == ICU_STOP) {
+ uint8_t i = index(icup);
+ /* Normal waveform generation (counts from 0 to 0xFFFF) */
+ *regs_table[i].tccra &= ~((1 << WGM11) | (1 << WGM10));
+ *regs_table[i].tccrb &= ~((1 << WGM13) | (1 << WGM12));
+ /* Enable noise canceler, set prescale to CLK/1024 */
+ *regs_table[i].tccrb |= (1 << ICNC1) | (1 << CS12) | (1 << CS10);
+ if (icup->config->mode == ICU_INPUT_ACTIVE_HIGH)
+ *regs_table[i].tccrb |= (1 << ICES1);
+ else
+ *regs_table[i].tccrb &= ~(1 << ICES1);
+ }
+}
+
+/**
+ * @brief Deactivates the ICU peripheral.
+ *
+ * @param[in] icup pointer to the @p ICUDriver object
+ *
+ * @notapi
+ */
+void icu_lld_stop(ICUDriver *icup) {
+
+ if (icup->state == ICU_READY) {
+ /* Resets the peripheral.*/
+
+ /* Disables the peripheral.*/
+#if AVR_ICU_USE_TIM1
+ if (&ICUD1 == icup) {
+
+ }
+#endif /* AVR_ICU_USE_TIM1 */
+ }
+}
+
+/**
+ * @brief Enables the input capture.
+ *
+ * @param[in] icup pointer to the @p ICUDriver object
+ *
+ * @notapi
+ */
+void icu_lld_enable(ICUDriver *icup) {
+
+ uint8_t i = index(icup);
+ icup->width = icup->period = 0;
+ *regs_table[i].tcnt = 0;
+ *regs_table[i].timsk |= (1 << ICIE1);
+ if (icup->config->overflow_cb != NULL)
+ *regs_table[i].timsk |= (1 << TOIE1);
+}
+
+/**
+ * @brief Disables the input capture.
+ *
+ * @param[in] icup pointer to the @p ICUDriver object
+ *
+ * @notapi
+ */
+void icu_lld_disable(ICUDriver *icup) {
+
+ uint8_t i = index(icup);
+ *regs_table[i].timsk &= ~((1 << ICIE1) | (1 << TOIE1));
+}
+
+/**
+ * @brief Returns the width of the latest pulse.
+ * @details The pulse width is defined as number of ticks between the start
+ * edge and the stop edge.
+ *
+ * @param[in] icup pointer to the @p ICUDriver object
+ * @return The number of ticks.
+ *
+ * @notapi
+ */
+icucnt_t icu_lld_get_width(ICUDriver *icup) {
+
+ return icup->width;
+}
+
+/**
+ * @brief Returns the width of the latest cycle.
+ * @details The cycle width is defined as number of ticks between a start
+ * edge and the next start edge.
+ *
+ * @param[in] icup pointer to the @p ICUDriver object
+ * @return The number of ticks.
+ *
+ * @notapi
+ */
+icucnt_t icu_lld_get_period(ICUDriver *icup) {
+
+ return icup->period;
+}
+
+#endif /* HAL_USE_ICU */
+
+/** @} */
diff --git a/os/hal/ports/AVR/TINY/TIMv1/hal_icu_lld.h b/os/hal/ports/AVR/TINY/TIMv1/hal_icu_lld.h new file mode 100644 index 000000000..d9a67ae5a --- /dev/null +++ b/os/hal/ports/AVR/TINY/TIMv1/hal_icu_lld.h @@ -0,0 +1,195 @@ +/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file hal_icu_lld.h
+ * @brief AVR ICU driver subsystem low level driver header.
+ *
+ * @addtogroup ICU
+ * @{
+ */
+
+#ifndef HAL_ICU_LLD_H
+#define HAL_ICU_LLD_H
+
+#if HAL_USE_ICU || defined(__DOXYGEN__)
+
+#include "avr_timers.h"
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @name Configuration options
+ * @{
+ */
+/**
+ * @brief ICU driver enable switch.
+ * @details If set to @p TRUE the support for ICU1 is included.
+ */
+#if !defined(AVR_ICU_USE_TIM1) || defined(__DOXYGEN__)
+#define AVR_ICU_USE_TIM1 FALSE
+#endif
+/**
+ * @brief ICU driver enable switch.
+ * @details If set to @p TRUE the support for ICU3 is included.
+ */
+#if !defined(AVR_ICU_USE_TIM3) || defined(__DOXYGEN__)
+#define AVR_ICU_USE_TIM3 FALSE
+#endif
+/**
+ * @brief ICU driver enable switch.
+ * @details If set to @p TRUE the support for ICU4 is included.
+ */
+#if !defined(AVR_ICU_USE_TIM4) || defined(__DOXYGEN__)
+#define AVR_ICU_USE_TIM4 FALSE
+#endif
+/**
+ * @brief ICU driver enable switch.
+ * @details If set to @p TRUE the support for ICU5 is included.
+ */
+#if !defined(AVR_ICU_USE_TIM5) || defined(__DOXYGEN__)
+#define AVR_ICU_USE_TIM5 FALSE
+#endif
+/** @} */
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief ICU driver mode.
+ */
+typedef enum {
+ ICU_INPUT_ACTIVE_HIGH = 0, /**< Trigger on rising edge. */
+ ICU_INPUT_ACTIVE_LOW = 1, /**< Trigger on falling edge. */
+} icumode_t;
+
+/**
+ * @brief ICU frequency type.
+ */
+typedef uint16_t icufreq_t;
+
+/**
+ * @brief ICU counter type.
+ */
+typedef uint16_t icucnt_t;
+
+/**
+ * @brief Driver configuration structure.
+ * @note It could be empty on some architectures.
+ */
+typedef struct {
+ /**
+ * @brief Driver mode.
+ */
+ icumode_t mode;
+ /**
+ * @brief Timer clock in Hz.
+ * @note The low level can use assertions in order to catch invalid
+ * frequency specifications.
+ */
+ icufreq_t frequency;
+ /**
+ * @brief Callback for pulse width measurement.
+ */
+ icucallback_t width_cb;
+ /**
+ * @brief Callback for cycle period measurement.
+ */
+ icucallback_t period_cb;
+ /**
+ * @brief Callback for timer overflow.
+ */
+ icucallback_t overflow_cb;
+ /* End of the mandatory fields.*/
+} ICUConfig;
+
+/**
+ * @brief Structure representing an ICU driver.
+ */
+struct ICUDriver {
+ /**
+ * @brief Driver state.
+ */
+ icustate_t state;
+ /**
+ * @brief Current configuration data.
+ */
+ const ICUConfig *config;
+#if defined(ICU_DRIVER_EXT_FIELDS)
+ ICU_DRIVER_EXT_FIELDS
+#endif
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Width value read by ISR.
+ */
+ icucnt_t width;
+ /**
+ * @brief Period value read by ISR.
+ */
+ icucnt_t period;
+};
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#if AVR_ICU_USE_TIM1 && !defined(__DOXYGEN__)
+extern ICUDriver ICUD1;
+#endif
+#if AVR_ICU_USE_TIM3 && !defined(__DOXYGEN__)
+extern ICUDriver ICUD3;
+#endif
+#if AVR_ICU_USE_TIM4 && !defined(__DOXYGEN__)
+extern ICUDriver ICUD4;
+#endif
+#if AVR_ICU_USE_TIM5 && !defined(__DOXYGEN__)
+extern ICUDriver ICUD5;
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void icu_lld_init(void);
+ void icu_lld_start(ICUDriver *icup);
+ void icu_lld_stop(ICUDriver *icup);
+ void icu_lld_enable(ICUDriver *icup);
+ void icu_lld_disable(ICUDriver *icup);
+ icucnt_t icu_lld_get_width(ICUDriver *icup);
+ icucnt_t icu_lld_get_period(ICUDriver *icup);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_ICU */
+
+#endif /* HAL_ICU_LLD_H */
+
+/** @} */
diff --git a/os/hal/ports/AVR/TINY/TIMv1/hal_pwm_lld.c b/os/hal/ports/AVR/TINY/TIMv1/hal_pwm_lld.c new file mode 100644 index 000000000..edd112e6d --- /dev/null +++ b/os/hal/ports/AVR/TINY/TIMv1/hal_pwm_lld.c @@ -0,0 +1,565 @@ +/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/*
+ This driver is based on the work done by Matteo Serva available at
+ http://github.com/matteoserva/ChibiOS-AVR
+*/
+
+/**
+ * @file hal_pwm_lld.c
+ * @brief AVR PWM driver subsystem low level driver.
+ *
+ * @addtogroup PWM
+ * @{
+ */
+
+#include "hal.h"
+
+#if HAL_USE_PWM || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+typedef struct {
+ volatile uint8_t *tccra;
+ volatile uint8_t *tccrb;
+ volatile uint8_t *ocrah;
+ volatile uint8_t *ocral;
+ volatile uint8_t *ocrbh;
+ volatile uint8_t *ocrbl;
+ volatile uint8_t *ocrch;
+ volatile uint8_t *ocrcl;
+ volatile uint8_t *tifr;
+ volatile uint8_t *timsk;
+} timer_registers_t;
+
+static timer_registers_t regs_table[]=
+{
+#if AVR_PWM_USE_TIM1 || defined(__DOXYGEN__)
+#if defined(OCR1C)
+ {&TCCR1A, &TCCR1B, &OCR1AH, &OCR1AL, &OCR1BH, &OCR1BL, &OCR1CH, &OCR1CL, &TIFR1, &TIMSK1},
+#else
+ {&TCCR1A, &TCCR1B, &OCR1AH, &OCR1AL, &OCR1BH, &OCR1BL, NULL, NULL, &TIFR1, &TIMSK1},
+#endif
+#endif
+#if AVR_PWM_USE_TIM2 || defined(__DOXYGEN__)
+ {&TCCR2A, &TCCR2B, &OCR2A, &OCR2A, &OCR2B, &OCR2B, NULL, NULL, &TIFR2, &TIMSK2},
+#endif
+#if AVR_PWM_USE_TIM3 || defined(__DOXYGEN__)
+ {&TCCR3A, &TCCR3B, &OCR3AH, &OCR3AL, &OCR3BH, &OCR3BL, &OCR3CH, &OCR3CL, &TIFR3, &TIMSK3},
+#endif
+#if AVR_PWM_USE_TIM4 || defined(__DOXYGEN__)
+ {&TCCR4A, &TCCR4B, &OCR4AH, &OCR4AL, &OCR4CH, &OCR4CL, &OCR4CH, &OCR4CL, &TIFR4, &TIMSK4},
+#endif
+#if AVR_PWM_USE_TIM5 || defined(__DOXYGEN__)
+ {&TCCR5A, &TCCR5B, &OCR5AH, &OCR5AL, &OCR5BH, &OCR5BL, &OCR5CH, &OCR5CL, &TIFR5, &TIMSK5},
+#endif
+};
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/** @brief PWM driver identifiers.*/
+#if AVR_PWM_USE_TIM1 || defined(__DOXYGEN__)
+PWMDriver PWMD1;
+#endif
+#if AVR_PWM_USE_TIM2 || defined(__DOXYGEN__)
+PWMDriver PWMD2;
+#endif
+#if AVR_PWM_USE_TIM3 || defined(__DOXYGEN__)
+PWMDriver PWMD3;
+#endif
+#if AVR_PWM_USE_TIM4 || defined(__DOXYGEN__)
+PWMDriver PWMD4;
+#endif
+#if AVR_PWM_USE_TIM5 || defined(__DOXYGEN__)
+PWMDriver PWMD5;
+#endif
+
+/*===========================================================================*/
+/* Driver local variables. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+static void config_channel(volatile uint8_t *tccra,
+ uint8_t com1,
+ uint8_t com0,
+ pwmmode_t mode)
+{
+ *tccra &= ~((1 << com1) | (1 << com0));
+ if (mode == PWM_OUTPUT_ACTIVE_HIGH)
+ *tccra |= ((1 << com1) | (0 << com0)); /* non inverting mode */
+ else if (mode == PWM_OUTPUT_ACTIVE_LOW)
+ *tccra |= (1 << com1) | (1 << com0); /* inverting mode */
+}
+
+static uint8_t timer_index(PWMDriver *pwmp)
+{
+ uint8_t index = 0;
+
+#if AVR_PWM_USE_TIM1 || defined(__DOXYGEN__)
+ if (pwmp == &PWMD1) return index;
+ else index++;
+#endif
+#if AVR_PWM_USE_TIM2 || defined(__DOXYGEN__)
+ if (pwmp == &PWMD2) return index;
+ else index++;
+#endif
+#if AVR_PWM_USE_TIM3 || defined(__DOXYGEN__)
+ if (pwmp == &PWMD3) return index;
+ else index++;
+#endif
+#if AVR_PWM_USE_TIM4 || defined(__DOXYGEN__)
+ if (pwmp == &PWMD4) return index;
+ else index++;
+#endif
+#if AVR_PWM_USE_TIM5 || defined(__DOXYGEN__)
+ if (pwmp == &PWMD5) return index;
+ else index++;
+#endif
+
+ /* This is an error! */
+ return index;
+}
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+/*
+ * interrupt for compare1&2 and clock overflow. pwmd1 & pwmd2
+ */
+#if AVR_PWM_USE_TIM1 || defined(__DOXYGEN__)
+OSAL_IRQ_HANDLER(TIMER1_OVF_vect)
+{
+ OSAL_IRQ_PROLOGUE();
+ PWMD1.config->callback(&PWMD1);
+ OSAL_IRQ_EPILOGUE();
+}
+
+OSAL_IRQ_HANDLER(TIMER1_COMPA_vect)
+{
+ OSAL_IRQ_PROLOGUE();
+ PWMD1.config->channels[0].callback(&PWMD1);
+ OSAL_IRQ_EPILOGUE();
+}
+
+OSAL_IRQ_HANDLER(TIMER1_COMPB_vect)
+{
+ OSAL_IRQ_PROLOGUE();
+ PWMD1.config->channels[1].callback(&PWMD1);
+ OSAL_IRQ_EPILOGUE();
+}
+#if PWM_CHANNELS > 2
+OSAL_IRQ_HANDLER(TIMER1_COMPC_vect)
+{
+ OSAL_IRQ_PROLOGUE();
+ PWMD1.config->channels[2].callback(&PWMD1);
+ OSAL_IRQ_EPILOGUE();
+}
+#endif
+#endif
+
+#if AVR_PWM_USE_TIM2 || defined(__DOXYGEN__)
+OSAL_IRQ_HANDLER(TIMER2_OVF_vect)
+{
+ OSAL_IRQ_PROLOGUE();
+ PWMD2.config->callback(&PWMD2);
+ OSAL_IRQ_EPILOGUE();
+}
+
+OSAL_IRQ_HANDLER(TIMER2_COMPA_vect)
+{
+ OSAL_IRQ_PROLOGUE();
+ PWMD2.config->channels[0].callback(&PWMD2);
+ OSAL_IRQ_EPILOGUE();
+}
+
+OSAL_IRQ_HANDLER(TIMER2_COMPB_vect)
+{
+ OSAL_IRQ_PROLOGUE();
+ PWMD2.config->channels[1].callback(&PWMD2);
+ OSAL_IRQ_EPILOGUE();
+}
+#endif
+
+#if AVR_PWM_USE_TIM3 || defined(__DOXYGEN__)
+OSAL_IRQ_HANDLER(TIMER3_OVF_vect)
+{
+ OSAL_IRQ_PROLOGUE();
+ PWMD3.config->callback(&PWMD3);
+ OSAL_IRQ_EPILOGUE();
+}
+
+OSAL_IRQ_HANDLER(TIMER3_COMPA_vect)
+{
+ OSAL_IRQ_PROLOGUE();
+ PWMD3.config->channels[0].callback(&PWMD3);
+ OSAL_IRQ_EPILOGUE();
+}
+
+OSAL_IRQ_HANDLER(TIMER3_COMPB_vect)
+{
+ OSAL_IRQ_PROLOGUE();
+ PWMD3.config->channels[1].callback(&PWMD3);
+ OSAL_IRQ_EPILOGUE();
+}
+
+OSAL_IRQ_HANDLER(TIMER3_COMPC_vect)
+{
+ OSAL_IRQ_PROLOGUE();
+ PWMD3.config->channels[2].callback(&PWMD3);
+ OSAL_IRQ_EPILOGUE();
+}
+#endif
+
+#if AVR_PWM_USE_TIM4 || defined(__DOXYGEN__)
+OSAL_IRQ_HANDLER(TIMER4_OVF_vect)
+{
+ OSAL_IRQ_PROLOGUE();
+ PWMD4.config->callback(&PWMD4);
+ OSAL_IRQ_EPILOGUE();
+}
+
+OSAL_IRQ_HANDLER(TIMER4_COMPA_vect)
+{
+ OSAL_IRQ_PROLOGUE();
+ PWMD4.config->channels[0].callback(&PWMD4);
+ OSAL_IRQ_EPILOGUE();
+}
+
+OSAL_IRQ_HANDLER(TIMER4_COMPB_vect)
+{
+ OSAL_IRQ_PROLOGUE();
+ PWMD4.config->channels[1].callback(&PWMD4);
+ OSAL_IRQ_EPILOGUE();
+}
+
+OSAL_IRQ_HANDLER(TIMER4_COMPC_vect)
+{
+ OSAL_IRQ_PROLOGUE();
+ PWMD4.config->channels[2].callback(&PWMD4);
+ OSAL_IRQ_EPILOGUE();
+}
+#endif
+
+#if AVR_PWM_USE_TIM5 || defined(__DOXYGEN__)
+OSAL_IRQ_HANDLER(TIMER5_OVF_vect)
+{
+ OSAL_IRQ_PROLOGUE();
+ PWMD5.config->callback(&PWMD5);
+ OSAL_IRQ_EPILOGUE();
+}
+
+OSAL_IRQ_HANDLER(TIMER5_COMPA_vect)
+{
+ OSAL_IRQ_PROLOGUE();
+ PWMD5.config->channels[0].callback(&PWMD5);
+ OSAL_IRQ_EPILOGUE();
+}
+
+OSAL_IRQ_HANDLER(TIMER5_COMPB_vect)
+{
+ OSAL_IRQ_PROLOGUE();
+ PWMD5.config->channels[1].callback(&PWMD5);
+ OSAL_IRQ_EPILOGUE();
+}
+
+OSAL_IRQ_HANDLER(TIMER5_COMPC_vect)
+{
+ OSAL_IRQ_PROLOGUE();
+ PWMD5.config->channels[2].callback(&PWMD5);
+ OSAL_IRQ_EPILOGUE();
+}
+#endif
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level PWM driver initialization.
+ *
+ * @notapi
+ */
+void pwm_lld_init(void)
+{
+#if AVR_PWM_USE_TIM1 || defined(__DOXYGEN__)
+ pwmObjectInit(&PWMD1);
+ PWMD1.channels = PWM_CHANNELS;
+ TCCR1A = (1 << WGM11) | (1 << WGM10);
+ TCCR1B = (0 << WGM13) | (1 << WGM12);
+#endif
+
+#if AVR_PWM_USE_TIM2 || defined(__DOXYGEN__)
+ pwmObjectInit(&PWMD2);
+ PWMD2.channels = PWM_CHANNELS;
+ TCCR2A = (1 << WGM21) | (1 << WGM20);
+ TCCR2B = (0 << WGM22);
+#endif
+
+#if AVR_PWM_USE_TIM3 || defined(__DOXYGEN__)
+ pwmObjectInit(&PWMD3);
+ PWMD3.channels = PWM_CHANNELS;
+ TCCR3A = (1 << WGM31) | (1 << WGM30);
+ TCCR3B = (0 << WGM33) | (1 << WGM32);
+#endif
+
+#if AVR_PWM_USE_TIM4 || defined(__DOXYGEN__)
+ pwmObjectInit(&PWMD4);
+ PWMD4.channels = PWM_CHANNELS;
+ TCCR4A = (1 << WGM41) | (1 << WGM40);
+ TCCR4B = (0 << WGM43) | (1 << WGM42);
+#endif
+
+#if AVR_PWM_USE_TIM5 || defined(__DOXYGEN__)
+ pwmObjectInit(&PWMD5);
+ PWMD5.channels = PWM_CHANNELS;
+ TCCR5A = (1 << WGM51) | (1 << WGM50);
+ TCCR5B = (0 << WGM53) | (1 << WGM52);
+#endif
+}
+
+/**
+ * @brief Configures and activates the PWM peripheral.
+ *
+ * @param[in] pwmp pointer to the @p PWMDriver object
+ *
+ * @notapi
+ */
+void pwm_lld_start(PWMDriver *pwmp)
+{
+ if (pwmp->state == PWM_STOP) {
+
+#if AVR_PWM_USE_TIM2 || defined(__DOXYGEN__)
+ if (pwmp == &PWMD2) {
+ TCCR2B &= ~((1 << CS22) | (1 << CS21));
+ TCCR2B |= (1 << CS20);
+ if (pwmp->config->callback != NULL)
+ TIMSK2 |= (1 << TOIE2);
+ return;
+ }
+#endif
+
+ uint8_t i = timer_index(pwmp);
+
+ /* TODO: support other prescaler options */
+
+ *regs_table[i].tccrb &= ~(1 << CS11);
+ *regs_table[i].tccrb |= (1 << CS12) | (1 << CS10);
+ if (pwmp->config->callback != NULL)
+ *regs_table[i].timsk = (1 << TOIE1);
+ }
+}
+
+/**
+ * @brief Deactivates the PWM peripheral.
+ *
+ * @param[in] pwmp pointer to the @p PWMDriver object
+ *
+ * @notapi
+ */
+void pwm_lld_stop(PWMDriver *pwmp)
+{
+ uint8_t i = timer_index(pwmp);
+ *regs_table[i].tccrb &= ~((1 << CS12) | (1 << CS11) | (1 << CS10));
+ *regs_table[i].timsk = 0;
+}
+
+/**
+ * @brief Changes the period the PWM peripheral.
+ * @details This function changes the period of a PWM unit that has already
+ * been activated using @p pwmStart().
+ * @pre The PWM unit must have been activated using @p pwmStart().
+ * @post The PWM unit period is changed to the new value.
+ * @note The function has effect at the next cycle start.
+ * @note If a period is specified that is shorter than the pulse width
+ * programmed in one of the channels then the behavior is not
+ * guaranteed.
+ *
+ * @param[in] pwmp pointer to a @p PWMDriver object
+ * @param[in] period new cycle time in ticks
+ *
+ * @notapi
+ */
+void pwm_lld_change_period(PWMDriver *pwmp, pwmcnt_t period)
+{
+}
+
+/**
+ * @brief Enables a PWM channel.
+ * @pre The PWM unit must have been activated using @p pwmStart().
+ * @post The channel is active using the specified configuration.
+ * @note Depending on the hardware implementation this function has
+ * effect starting on the next cycle (recommended implementation)
+ * or immediately (fallback implementation).
+ *
+ * @param[in] pwmp pointer to a @p PWMDriver object
+ * @param[in] channel PWM channel identifier (0...PWM_CHANNELS-1)
+ * @param[in] width PWM pulse width as clock pulses number
+ *
+ * @notapi
+ */
+void pwm_lld_enable_channel(PWMDriver *pwmp,
+ pwmchannel_t channel,
+ pwmcnt_t width)
+{
+ uint16_t val = width;
+ if (val > MAX_PWM_VALUE)
+ val = MAX_PWM_VALUE;
+
+#if AVR_PWM_USE_TIM2 || defined(__DOXYGEN__)
+ if (pwmp == &PWMD2) {
+ config_channel(&TCCR2A,
+ 7 - 2*channel,
+ 6 - 2*channel,
+ pwmp->config->channels[channel].mode);
+ TIMSK2 |= (1 << (channel + 1));
+ /* Timer 2 is 8 bit */
+ if (val > 0xFF)
+ val = 0xFF;
+ if (pwmp->config->channels[channel].callback) {
+ switch (channel) {
+ case 0: OCR2A = val; break;
+ case 1: OCR2B = val; break;
+ }
+ }
+ return;
+ }
+#endif
+
+ uint8_t i = timer_index(pwmp);
+ config_channel(regs_table[i].tccra,
+ 7 - 2*channel,
+ 6 - 2*channel,
+ pwmp->config->channels[channel].mode);
+ volatile uint8_t *ocrh, *ocrl;
+ switch (channel) {
+ case 1:
+ ocrh = regs_table[i].ocrbh;
+ ocrl = regs_table[i].ocrbl;
+ break;
+ case 2:
+ ocrh = regs_table[i].ocrch;
+ ocrl = regs_table[i].ocrcl;
+ break;
+ default:
+ ocrh = regs_table[i].ocrah;
+ ocrl = regs_table[i].ocral;
+ }
+ *ocrh = val >> 8;
+ *ocrl = val & 0xFF;
+ *regs_table[i].tifr |= (1 << (channel + 1));
+ if (pwmp->config->channels[channel].callback != NULL)
+ *regs_table[i].timsk |= (1 << (channel + 1));
+}
+
+/**
+ * @brief Disables a PWM channel.
+ * @pre The PWM unit must have been activated using @p pwmStart().
+ * @post The channel is disabled and its output line returned to the
+ * idle state.
+ * @note Depending on the hardware implementation this function has
+ * effect starting on the next cycle (recommended implementation)
+ * or immediately (fallback implementation).
+ *
+ * @param[in] pwmp pointer to a @p PWMDriver object
+ * @param[in] channel PWM channel identifier (0...PWM_CHANNELS-1)
+ *
+ * @notapi
+ */
+void pwm_lld_disable_channel(PWMDriver *pwmp, pwmchannel_t channel)
+{
+ uint8_t i = timer_index(pwmp);
+ config_channel(regs_table[i].tccra,
+ 7 - 2*channel,
+ 6 - 2*channel,
+ PWM_OUTPUT_DISABLED);
+ *regs_table[i].timsk &= ~(1 << (channel + 1));
+}
+
+/**
+ * @brief Enables the periodic activation edge notification.
+ * @pre The PWM unit must have been activated using @p pwmStart().
+ * @note If the notification is already enabled then the call has no effect.
+ *
+ * @param[in] pwmp pointer to a @p PWMDriver object
+ *
+ * @notapi
+ */
+void pwm_lld_enable_periodic_notification(PWMDriver *pwmp) {
+ uint8_t i = timer_index(pwmp);
+ *regs_table[i].timsk |= (1 << TOIE1);
+}
+
+/**
+ * @brief Disables the periodic activation edge notification.
+ * @pre The PWM unit must have been activated using @p pwmStart().
+ * @note If the notification is already disabled then the call has no effect.
+ *
+ * @param[in] pwmp pointer to a @p PWMDriver object
+ *
+ * @notapi
+ */
+void pwm_lld_disable_periodic_notification(PWMDriver *pwmp) {
+ uint8_t i = timer_index(pwmp);
+ *regs_table[i].timsk &= ~(1 << TOIE1);
+}
+
+/**
+ * @brief Enables a channel de-activation edge notification.
+ * @pre The PWM unit must have been activated using @p pwmStart().
+ * @pre The channel must have been activated using @p pwmEnableChannel().
+ * @note If the notification is already enabled then the call has no effect.
+ *
+ * @param[in] pwmp pointer to a @p PWMDriver object
+ * @param[in] channel PWM channel identifier (0...channels-1)
+ *
+ * @notapi
+ */
+void pwm_lld_enable_channel_notification(PWMDriver *pwmp,
+ pwmchannel_t channel) {
+ uint8_t i = timer_index(pwmp);
+ *regs_table[i].timsk |= (1 << (channel + 1));
+}
+
+/**
+ * @brief Disables a channel de-activation edge notification.
+ * @pre The PWM unit must have been activated using @p pwmStart().
+ * @pre The channel must have been activated using @p pwmEnableChannel().
+ * @note If the notification is already disabled then the call has no effect.
+ *
+ * @param[in] pwmp pointer to a @p PWMDriver object
+ * @param[in] channel PWM channel identifier (0...channels-1)
+ *
+ * @notapi
+ */
+void pwm_lld_disable_channel_notification(PWMDriver *pwmp,
+ pwmchannel_t channel) {
+
+ uint8_t i = timer_index(pwmp);
+ *regs_table[i].timsk &= ~(1 << (channel + 1));
+}
+
+#endif /* HAL_USE_PWM */
+
+/** @} */
diff --git a/os/hal/ports/AVR/TINY/TIMv1/hal_pwm_lld.h b/os/hal/ports/AVR/TINY/TIMv1/hal_pwm_lld.h new file mode 100644 index 000000000..39dffbce8 --- /dev/null +++ b/os/hal/ports/AVR/TINY/TIMv1/hal_pwm_lld.h @@ -0,0 +1,233 @@ +/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/*
+ This driver is based on the work done by Matteo Serva available at
+ http://github.com/matteoserva/ChibiOS-AVR
+*/
+
+/**
+ * @file hal_pwm_lld.h
+ * @brief AVR PWM driver subsystem low level driver header.
+ *
+ * @addtogroup PWM
+ * @{
+ */
+
+#ifndef HAL_PWM_LLD_H
+#define HAL_PWM_LLD_H
+
+#if HAL_USE_PWM || defined(__DOXYGEN__)
+
+#include "avr_timers.h"
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+#if !defined(AVR_PWM_USE_TIM1)
+#define AVR_PWM_USE_TIM1 FALSE
+#endif
+#if !defined(AVR_PWM_USE_TIM2)
+#define AVR_PWM_USE_TIM2 FALSE
+#endif
+#if !defined(AVR_PWM_USE_TIM3)
+#define AVR_PWM_USE_TIM3 FALSE
+#endif
+#if !defined(AVR_PWM_USE_TIM4)
+#define AVR_PWM_USE_TIM4 FALSE
+#endif
+#if !defined(AVR_PWM_USE_TIM5)
+#define AVR_PWM_USE_TIM5 FALSE
+#endif
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Number of PWM channels per PWM driver.
+ */
+#if !defined(PWM_CHANNELS) || defined(__DOXYGEN__)
+ #if defined(TIMER1_COMPC_vect)
+ #define PWM_CHANNELS 3
+ #else
+ #define PWM_CHANNELS 2
+ #endif
+#endif
+
+#define MAX_PWM_VALUE 0x3FF
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief PWM mode type.
+ */
+typedef uint8_t pwmmode_t;
+
+/**
+ * @brief PWM channel type.
+ */
+typedef uint8_t pwmchannel_t;
+
+/**
+ * @brief Type of a channels mask.
+ */
+typedef uint8_t pwmchnmsk_t;
+
+/**
+ * @brief PWM counter type.
+ */
+typedef uint16_t pwmcnt_t;
+
+/**
+ * @brief PWM driver channel configuration structure.
+ * @note Some architectures may not be able to support the channel mode
+ * or the callback, in this case the fields are ignored.
+ */
+typedef struct {
+ /**
+ * @brief Channel active logic level.
+ */
+ pwmmode_t mode;
+ /**
+ * @brief Channel callback pointer.
+ * @note This callback is invoked on the channel compare event. If set to
+ * @p NULL then the callback is disabled.
+ */
+ pwmcallback_t callback;
+ /* End of the mandatory fields.*/
+} PWMChannelConfig;
+
+/**
+ * @brief Driver configuration structure.
+ * @note Implementations may extend this structure to contain more,
+ * architecture dependent, fields.
+ */
+typedef struct {
+ /**
+ * @brief Timer clock in Hz.
+ * @note The low level can use assertions in order to catch invalid
+ * frequency specifications.
+ */
+ uint16_t frequency;
+ /**
+ * @brief PWM period in ticks.
+ * @note The low level can use assertions in order to catch invalid
+ * period specifications.
+ */
+ pwmcnt_t period;
+ /**
+ * @brief Periodic callback pointer.
+ * @note This callback is invoked on PWM counter reset. If set to
+ * @p NULL then the callback is disabled.
+ */
+ pwmcallback_t callback;
+ /**
+ * @brief Channels configurations.
+ */
+ PWMChannelConfig channels[PWM_CHANNELS];
+ /* End of the mandatory fields.*/
+} PWMConfig;
+
+/**
+ * @brief Structure representing an PWM driver.
+ * @note Implementations may extend this structure to contain more,
+ * architecture dependent, fields.
+ */
+struct PWMDriver {
+ /**
+ * @brief Driver state.
+ */
+ pwmstate_t state;
+ /**
+ * @brief Current configuration data.
+ */
+ const PWMConfig *config;
+ /**
+ * @brief Current PWM period in ticks.
+ */
+ pwmcnt_t period;
+ /**
+ * @brief Mask of the enabled channels.
+ */
+ pwmchnmsk_t enabled;
+ /**
+ * @brief Number of channels in this instance.
+ */
+ pwmchannel_t channels;
+#if defined(PWM_DRIVER_EXT_FIELDS)
+ PWM_DRIVER_EXT_FIELDS
+#endif
+ /* End of the mandatory fields.*/
+};
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#if AVR_PWM_USE_TIM1 || defined(__DOXYGEN__)
+extern PWMDriver PWMD1;
+#endif
+#if AVR_PWM_USE_TIM2 || defined(__DOXYGEN__)
+extern PWMDriver PWMD2;
+#endif
+#if AVR_PWM_USE_TIM3 || defined(__DOXYGEN__)
+extern PWMDriver PWMD3;
+#endif
+#if AVR_PWM_USE_TIM4 || defined(__DOXYGEN__)
+extern PWMDriver PWMD4;
+#endif
+#if AVR_PWM_USE_TIM5 || defined(__DOXYGEN__)
+extern PWMDriver PWMD5;
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void pwm_lld_init(void);
+ void pwm_lld_start(PWMDriver *pwmp);
+ void pwm_lld_stop(PWMDriver *pwmp);
+ void pwm_lld_change_period(PWMDriver *pwmp, pwmcnt_t period);
+ void pwm_lld_enable_channel(PWMDriver *pwmp,
+ pwmchannel_t channel,
+ pwmcnt_t width);
+ void pwm_lld_disable_channel(PWMDriver *pwmp, pwmchannel_t channel);
+ void pwm_lld_enable_periodic_notification(PWMDriver *pwmp);
+ void pwm_lld_disable_periodic_notification(PWMDriver *pwmp);
+ void pwm_lld_enable_channel_notification(PWMDriver *pwmp,
+ pwmchannel_t channel);
+ void pwm_lld_disable_channel_notification(PWMDriver *pwmp,
+ pwmchannel_t channel);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_PWM */
+
+#endif /* HAL_PWM_LLD_H */
+
+/** @} */
diff --git a/os/hal/ports/AVR/TINY/TIMv1/hal_st_lld.c b/os/hal/ports/AVR/TINY/TIMv1/hal_st_lld.c new file mode 100644 index 000000000..4732ec7dd --- /dev/null +++ b/os/hal/ports/AVR/TINY/TIMv1/hal_st_lld.c @@ -0,0 +1,253 @@ +/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file hal_st_lld.c
+ * @brief AVR ST subsystem low level driver source.
+ *
+ * @addtogroup ST
+ * @{
+ */
+
+#include "hal.h"
+
+#if (OSAL_ST_MODE != OSAL_ST_MODE_NONE) || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+/**
+ * @brief Timer maximum value
+ */
+#define AVR_TIMER_COUNTER_MAX 255
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+#if (OSAL_ST_MODE == OSAL_ST_MODE_PERIODIC) || defined(__DOXYGEN__)
+
+/* Work out what the timer interrupt is called on this MCU */
+#ifdef TIMER0_COMPA_vect
+ #define AVR_TIMER_VECT TIMER0_COMPA_vect
+#elif defined(TIMER_COMPA_vect)
+ #define AVR_TIMER_VECT TIMER_COMPA_vect
+#elif defined(TIMER0_COMP_vect)
+ #define AVR_TIMER_VECT TIMER0_COMP_vect
+#else
+ #error "Cannot find interrupt vector name for timer"
+#endif
+
+/* Find the most suitable prescaler setting for the desired OSAL_ST_FREQUENCY */
+#if ((F_CPU / OSAL_ST_FREQUENCY) <= AVR_TIMER_COUNTER_MAX)
+
+ #define AVR_TIMER_PRESCALER 1
+ #define AVR_TIMER_PRESCALER_BITS ((0<<CS02)|(0<<CS01)|(1<<CS00)) /* CLK */
+
+#elif ((F_CPU / OSAL_ST_FREQUENCY / 8) <= AVR_TIMER_COUNTER_MAX)
+
+ #define AVR_TIMER_PRESCALER 8
+ #define AVR_TIMER_PRESCALER_BITS ((0<<CS02)|(1<<CS01)|(0<<CS00)) /* CLK/8 */
+
+#elif ((F_CPU / OSAL_ST_FREQUENCY / 64) <= AVR_TIMER_COUNTER_MAX)
+
+ #define AVR_TIMER_PRESCALER 64
+
+ #ifdef __AVR_ATmega128__
+ #define AVR_TIMER_PRESCALER_BITS ((1<<CS02)|(0<<CS01)|(0<<CS00)) /* CLK/64 */
+ #else
+ #define AVR_TIMER_PRESCALER_BITS ((0<<CS02)|(1<<CS01)|(1<<CS00)) /* CLK/64 */
+ #endif
+
+#elif ((F_CPU / OSAL_ST_FREQUENCY / 256) <= AVR_TIMER_COUNTER_MAX)
+
+ #define AVR_TIMER_PRESCALER 256
+
+ #ifdef __AVR_ATmega128__
+ #define AVR_TIMER_PRESCALER_BITS ((1<<CS02)|(1<<CS01)|(0<<CS00)) /* CLK/256 */
+ #else
+ #define AVR_TIMER_PRESCALER_BITS ((1<<CS02)|(0<<CS01)|(0<<CS00)) /* CLK/256 */
+ #endif
+
+#elif ((F_CPU / OSAL_ST_FREQUENCY / 1024) <= AVR_TIMER_COUNTER_MAX)
+
+ #define AVR_TIMER_PRESCALER 1024
+
+ #ifdef __AVR_ATmega128__
+ #define AVR_TIMER_PRESCALER_BITS (1<<CS02)|(1<<CS01)|(1<<CS00); /* CLK/1024 */
+ #else
+ #define AVR_TIMER_PRESCALER_BITS (1<<CS02)|(0<<CS01)|(1<<CS00); /* CLK/1024 */
+ #endif
+
+#else
+ #error "Frequency too low for timer, please set OSAL_ST_FREQUENCY to a higher value"
+#endif
+
+#define AVR_TIMER_COUNTER (F_CPU / OSAL_ST_FREQUENCY / AVR_TIMER_PRESCALER)
+
+/* Test if OSAL_ST_FREQUENCY can be matched exactly using this timer */
+#define F_CPU_ (AVR_TIMER_COUNTER * AVR_TIMER_PRESCALER * OSAL_ST_FREQUENCY)
+#if (F_CPU_ != F_CPU)
+ #warning "OSAL_ST_FREQUENCY cannot be generated exactly using timer"
+#endif
+#undef F_CPU_
+
+#endif /* OSAL_ST_MODE == OSAL_ST_MODE_PERIODIC */
+
+#if (OSAL_ST_MODE == OSAL_ST_MODE_FREERUNNING) || defined(__DOXYGEN__)
+
+/* FIXME: Prescaler is now fixed in 1024.
+ * Should add support for calculating best value according to
+ * user requested configuration.
+ */
+#define PRESCALER (_BV(CS12) | _BV(CS10))
+
+#endif /* OSAL_ST_MODE == OSAL_ST_MODE_FREERUNNING */
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+#if (OSAL_ST_MODE == OSAL_ST_MODE_PERIODIC) || defined(__DOXYGEN__)
+
+/**
+ * @brief Timer handler for periodic mode.
+ */
+OSAL_IRQ_HANDLER(AVR_TIMER_VECT) {
+
+ OSAL_IRQ_PROLOGUE();
+
+ osalSysLockFromISR();
+ osalOsTimerHandlerI();
+ osalSysUnlockFromISR();
+
+ OSAL_IRQ_EPILOGUE();
+}
+
+#endif /* OSAL_ST_MODE == OSAL_ST_MODE_PERIODIC */
+
+#if (OSAL_ST_MODE == OSAL_ST_MODE_FREERUNNING) || defined(__DOXYGEN__)
+
+/**
+ * @brief Timer handler for free running mode.
+ */
+OSAL_IRQ_HANDLER(TIMER1_COMPA_vect) {
+
+ OSAL_IRQ_PROLOGUE();
+
+ // TODO: reset status if required
+
+ osalSysLockFromISR();
+ osalOsTimerHandlerI();
+ osalSysUnlockFromISR();
+
+ OSAL_IRQ_EPILOGUE();
+}
+
+#endif /* OSAL_ST_MODE == OSAL_ST_MODE_FREERUNNING */
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level ST driver initialization.
+ *
+ * @notapi
+ */
+void st_lld_init(void) {
+
+#if (OSAL_ST_MODE == OSAL_ST_MODE_FREERUNNING) || defined(__DOXYGEN__)
+
+ /*
+ * Periodic mode uses Timer 1 (16 bit).
+ */
+
+ /* CTC mode, no clock source */
+ TCCR1A = 0;
+ TCCR1B = _BV(WGM12);
+
+ /* start disabled */
+ TCCR1C = 0;
+ OCR1A = 0;
+ TCNT1 = 0;
+ TIFR_REG = _BV(OCF1A); /* Reset pending. */
+ TIMSK_REG = 0;
+ TCCR1B = PRESCALER;
+
+#endif /* OSAL_ST_MODE == OSAL_ST_MODE_FREERUNNING */
+
+#if (OSAL_ST_MODE == OSAL_ST_MODE_PERIODIC) || defined(__DOXYGEN__)
+
+ /*
+ * Periodic mode uses Timer 0 (8 bit).
+ */
+#if defined(TCCR0B) /* Timer has multiple output comparators */
+ TCCR0A = (1 << WGM01) | (0 << WGM00) | /* CTC mode. */
+ (0 << COM0A1) | (0 << COM0A0); /* OC0A disabled. */
+ //(0 << COM0B1) | (0 << COM0B0); /* OC0B disabled. */
+ // FIXME: See if the line bellow must be delate or recoded.
+ //TCCR0B = (0 << WGM02) | AVR_TIMER_PRESCALER_BITS; /* CTC mode. */
+ OCR0A = AVR_TIMER_COUNTER - 1;
+ TCNT0 = 0; /* Reset counter. */
+#if defined(__AVR_ATtiny85__)
+ TIFR = (1 << OCF0A); /* Reset pending. */
+ TIMSK = (1 << OCIE0A); /* IRQ on compare. */
+#else
+ TIFR0 = (1 << OCF0A); /* Reset pending. */
+ TIMSK0 = (1 << OCIE0A); /* IRQ on compare. */
+#endif
+
+#elif defined(TCCR0A) /* AT90CAN doesn't have TCCR0B and slightly different TCCR0A */
+ TCCR0A = (1 << WGM01) | (0 << WGM00) | /* CTC mode. */
+ (0 << COM0A1) | (0 << COM0A0); /* OC0A disabled. */
+ OCR0A = AVR_TIMER_COUNTER - 1;
+ TCNT0 = 0; /* Reset counter. */
+ TIFR0 = (1 << OCF0A); /* Reset pending. */
+ TIMSK0 = (1 << OCIE0A); /* IRQ on compare. */
+
+#elif defined(TCCR0) /* Timer has single output comparator */
+ TCCR0 = (1 << WGM01) | (0 << WGM00) | /* CTC mode. */
+ (0 << COM01) | (0 << COM00) | /* OC0A disabled. */
+ AVR_TIMER_PRESCALER_BITS;
+ OCR0 = AVR_TIMER_COUNTER - 1;
+ TCNT0 = 0; /* Reset counter. */
+ TIFR = (1 << OCF0); /* Reset pending. */
+ TIMSK = (1 << OCIE0); /* IRQ on compare. */
+#else
+ #error "Neither TCCR0A nor TCCR0 registers are defined"
+#endif
+
+#endif /* OSAL_ST_MODE == OSAL_ST_MODE_PERIODIC */
+
+}
+
+#endif /* OSAL_ST_MODE != OSAL_ST_MODE_NONE */
+
+/** @} */
diff --git a/os/hal/ports/AVR/TINY/TIMv1/hal_st_lld.h b/os/hal/ports/AVR/TINY/TIMv1/hal_st_lld.h new file mode 100644 index 000000000..a5b58e693 --- /dev/null +++ b/os/hal/ports/AVR/TINY/TIMv1/hal_st_lld.h @@ -0,0 +1,168 @@ +/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file hal_st_lld.h
+ * @brief ST Driver subsystem low level driver header.
+ * @details This header is designed to be include-able without having to
+ * include other files from the HAL.
+ *
+ * @addtogroup AVR
+ * @{
+ */
+
+#ifndef HAL_ST_LLD_H
+#define HAL_ST_LLD_H
+
+#include <avr/io.h>
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/*
+ * TODO: for models that have many timers,
+ * could add AVR_ST_USE_TIMER
+ */
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+/*
+ * TODO: error checks for valid timer selected
+ */
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void st_lld_init(void);
+#ifdef __cplusplus
+}
+#endif
+
+#if defined(__AVR_ATmega128__) || defined(__AVR_ATmega162__) || \
+ defined(__AVR_ATtiny85__)
+#define TIFR_REG TIFR
+#define TIMSK_REG TIMSK
+#else
+#define TIFR_REG TIFR1
+#define TIMSK_REG TIMSK1
+#endif
+
+/*===========================================================================*/
+/* Driver inline functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Returns the time counter value.
+ *
+ * @return The counter value.
+ *
+ * @notapi
+ */
+static inline systime_t st_lld_get_counter(void) {
+
+ return (systime_t) TCNT1;
+}
+
+/**
+ * @brief Starts the alarm.
+ * @note Makes sure that no spurious alarms are triggered after
+ * this call.
+ *
+ * @param[in] time the time to be set for the first alarm
+ *
+ * @notapi
+ */
+static inline void st_lld_start_alarm(systime_t time) {
+
+ OCR1A = (uint16_t) time;
+
+ /* Reset pending. */
+ TIFR_REG = _BV(OCF1A);
+
+ /* enable interrupt */
+ TIMSK_REG = _BV(OCIE1A);
+}
+
+/**
+ * @brief Stops the alarm interrupt.
+ *
+ * @notapi
+ */
+static inline void st_lld_stop_alarm(void) {
+
+ TIMSK_REG = 0;
+}
+
+/**
+ * @brief Sets the alarm time.
+ *
+ * @param[in] time the time to be set for the next alarm
+ *
+ * @notapi
+ */
+static inline void st_lld_set_alarm(systime_t time) {
+
+ OCR1A = (uint16_t) time;
+}
+
+/**
+ * @brief Returns the current alarm time.
+ *
+ * @return The currently set alarm time.
+ *
+ * @notapi
+ */
+static inline systime_t st_lld_get_alarm(void) {
+
+ return (systime_t) OCR1A;
+}
+
+/**
+ * @brief Determines if the alarm is active.
+ *
+ * @return The alarm status.
+ * @retval false if the alarm is not active.
+ * @retval true is the alarm is active
+ *
+ * @notapi
+ */
+static inline bool st_lld_is_alarm_active(void) {
+
+ return (bool) ((TIMSK_REG & _BV(OCIE1A)) != 0);
+}
+
+#endif /* HAL_ST_LLD_H */
+
+/** @} */
diff --git a/os/hal/ports/AVR/TINY/USARTv1/driver.mk b/os/hal/ports/AVR/TINY/USARTv1/driver.mk new file mode 100644 index 000000000..7a90004e6 --- /dev/null +++ b/os/hal/ports/AVR/TINY/USARTv1/driver.mk @@ -0,0 +1,13 @@ +ifeq ($(USE_SMART_BUILD),yes)
+ifneq ($(findstring HAL_USE_SERIAL TRUE,$(HALCONF)),)
+PLATFORMSRC += ${CHIBIOS}/os/hal/ports/AVR/TINY/USARTv1/hal_serial_lld.c
+endif
+ifneq ($(findstring HAL_USE_UART TRUE,$(HALCONF)),)
+PLATFORMSRC += ${CHIBIOS}/os/hal/ports/AVR/TINY/USARTv1/hal_uart_lld.c
+endif
+else
+PLATFORMSRC += ${CHIBIOS}/os/hal/ports/AVR/TINY/USARTv1/hal_serial_lld.c
+PLATFORMSRC += ${CHIBIOS}/os/hal/ports/AVR/TINY/USARTv1/hal_uart_lld.c
+endif
+
+PLATFORMINC += ${CHIBIOS}/os/hal/ports/AVR/TINY/USARTv1
diff --git a/os/hal/ports/AVR/TINY/USARTv1/hal_serial_lld.c b/os/hal/ports/AVR/TINY/USARTv1/hal_serial_lld.c new file mode 100644 index 000000000..de5143551 --- /dev/null +++ b/os/hal/ports/AVR/TINY/USARTv1/hal_serial_lld.c @@ -0,0 +1,408 @@ +/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file hal_serial_lld.c
+ * @brief AVR low level serial driver code.
+ *
+ * @addtogroup SERIAL
+ * @{
+ */
+
+#include "hal.h"
+
+#if HAL_USE_SERIAL || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/**
+ * @brief USART0 serial driver identifier.
+ * @note The name does not follow the convention used in the other ports
+ * (COMn) because a name conflict with the AVR headers.
+ */
+#if AVR_SERIAL_USE_USART0 || defined(__DOXYGEN__)
+SerialDriver SD1;
+
+ /* USARTs are not consistently named across the AVR range */
+ #ifdef USART0_RX_vect
+ #define AVR_SD1_RX_VECT USART0_RX_vect
+ #define AVR_SD1_TX_VECT USART0_UDRE_vect
+ #elif defined(USART_RX_vect)
+ #define AVR_SD1_RX_VECT USART_RX_vect
+ #define AVR_SD1_TX_VECT USART_UDRE_vect
+ #elif defined(USART0_RXC_vect)
+ #define AVR_SD1_RX_VECT USART0_RXC_vect
+ #define AVR_SD1_TX_VECT USART0_UDRE_vect
+ #else
+ #error "Cannot find USART to use for SD1"
+ #endif
+#endif /* AVR_SERIAL_USE_USART0 */
+
+/**
+ * @brief USART1 serial driver identifier.
+ * @note The name does not follow the convention used in the other ports
+ * (COMn) because a name conflict with the AVR headers.
+ */
+#if AVR_SERIAL_USE_USART1 || defined(__DOXYGEN__)
+SerialDriver SD2;
+
+ /* Check if USART1 exists for this MCU */
+ #ifdef USART1_RX_vect
+ #define AVR_SD2_RX_VECT USART1_RX_vect
+ #define AVR_SD2_TX_VECT USART1_UDRE_vect
+ #elif defined (USART1_RXC_vect)
+ #define AVR_SD2_RX_VECT USART1_RXC_vect
+ #define AVR_SD2_TX_VECT USART1_UDRE_vect
+ #else
+ #error "Cannot find USART to use for SD2"
+ #endif
+#endif /* AVR_SERIAL_USE_USART1 */
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+/**
+ * @brief Driver default configuration.
+ */
+static const SerialConfig default_config = {
+ UBRR2x_F(SERIAL_DEFAULT_BITRATE),
+ USART_CHAR_SIZE_8
+};
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+static void set_error(uint8_t sra, SerialDriver *sdp) {
+ eventflags_t sts = 0;
+ uint8_t dor = 0;
+ uint8_t upe = 0;
+ uint8_t fe = 0;
+
+#if AVR_SERIAL_USE_USART0
+ if (&SD1 == sdp) {
+ dor = (1 << DOR0);
+ upe = (1 << UPE0);
+ fe = (1 << FE0);
+ }
+#endif
+
+#if AVR_SERIAL_USE_USART1
+ if (&SD2 == sdp) {
+ dor = (1 << DOR1);
+ upe = (1 << UPE1);
+ fe = (1 << FE1);
+ }
+#endif
+
+ if (sra & dor)
+ sts |= SD_OVERRUN_ERROR;
+ if (sra & upe)
+ sts |= SD_PARITY_ERROR;
+ if (sra & fe)
+ sts |= SD_FRAMING_ERROR;
+ osalSysLockFromISR();
+ chnAddFlagsI(sdp, sts);
+ osalSysUnlockFromISR();
+}
+
+#if AVR_SERIAL_USE_USART0 || defined(__DOXYGEN__)
+static void notify1(io_queue_t *qp) {
+
+ (void)qp;
+ UCSR0B |= (1 << UDRIE0);
+}
+
+/**
+ * @brief USART0 initialization.
+ *
+ * @param[in] config the architecture-dependent serial driver configuration
+ */
+static void usart0_init(const SerialConfig *config) {
+
+ uint8_t ucsr0c;
+
+ UBRR0L = config->sc_brr;
+ UBRR0H = (config->sc_brr >> 8) & 0x0f;
+ UCSR0A = (1 << U2X0);
+ UCSR0B = (1 << RXEN0) | (1 << TXEN0) | (1 << RXCIE0);
+ switch (config->sc_bits_per_char) {
+ case USART_CHAR_SIZE_5:
+ ucsr0c = 0;
+ break;
+ case USART_CHAR_SIZE_6:
+ ucsr0c = (1 << UCSZ00);
+ break;
+ case USART_CHAR_SIZE_7:
+ ucsr0c = (1 << UCSZ01);
+ break;
+ case USART_CHAR_SIZE_9:
+ UCSR0B |= (1 << UCSZ02);
+ ucsr0c = (1 << UCSZ00) | (1 << UCSZ01);
+ break;
+ case USART_CHAR_SIZE_8:
+ default:
+ ucsr0c = (1 << UCSZ00) | (1 << UCSZ01);
+ }
+
+#if defined(__AVR_ATmega162__)
+ UCSR0C = (1 << URSEL0) | ucsr0c;
+#else
+ UCSR0C = ucsr0c;
+#endif
+}
+
+/**
+ * @brief USART0 de-initialization.
+ */
+static void usart0_deinit(void) {
+
+ UCSR0A = 0;
+ UCSR0B = 0;
+#if defined(__AVR_ATmega162__)
+ UCSR0C = (1 << URSEL0);
+#else
+ UCSR0C = 0;
+#endif
+}
+#endif
+
+#if AVR_SERIAL_USE_USART1 || defined(__DOXYGEN__)
+static void notify2(io_queue_t *qp) {
+
+ (void)qp;
+ UCSR1B |= (1 << UDRIE1);
+}
+
+/**
+ * @brief USART1 initialization.
+ *
+ * @param[in] config the architecture-dependent serial driver configuration
+ */
+static void usart1_init(const SerialConfig *config) {
+
+ uint8_t ucsr1c;
+
+ UBRR1L = config->sc_brr;
+ UBRR1H = (config->sc_brr >> 8) & 0x0f;
+ UCSR1A = (1 << U2X0);
+ UCSR1B = (1 << RXEN1) | (1 << TXEN1) | (1 << RXCIE1);
+ switch (config->sc_bits_per_char) {
+ case USART_CHAR_SIZE_5:
+ ucsr1c = 0;
+ break;
+ case USART_CHAR_SIZE_6:
+ ucsr1c = (1 << UCSZ10);
+ break;
+ case USART_CHAR_SIZE_7:
+ ucsr1c = (1 << UCSZ11);
+ break;
+ case USART_CHAR_SIZE_9:
+ UCSR1B |= (1 << UCSZ12);
+ ucsr1c = (1 << UCSZ10) | (1 << UCSZ11);
+ break;
+ case USART_CHAR_SIZE_8:
+ default:
+ ucsr1c = (1 << UCSZ10) | (1 << UCSZ11);
+ }
+
+#if defined(__AVR_ATmega162__)
+ UCSR1C = (1 << URSEL1) | ucsr1c;
+#else
+ UCSR1C = ucsr1c;
+#endif
+}
+
+/**
+ * @brief USART1 de-initialization.
+ */
+static void usart1_deinit(void) {
+
+ UCSR1A = 0;
+ UCSR1B = 0;
+#if defined(__AVR_ATmega162__)
+ UCSR1C = (1 << URSEL1);
+#else
+ UCSR1C = 0;
+#endif
+}
+#endif
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+#if AVR_SERIAL_USE_USART0 || defined(__DOXYGEN__)
+/**
+ * @brief USART0 RX interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(AVR_SD1_RX_VECT) {
+ uint8_t sra;
+
+ OSAL_IRQ_PROLOGUE();
+
+ sra = UCSR0A;
+ if (sra & ((1 << DOR0) | (1 << UPE0) | (1 << FE0)))
+ set_error(sra, &SD1);
+ osalSysLockFromISR();
+ sdIncomingDataI(&SD1, UDR0);
+ osalSysUnlockFromISR();
+
+ OSAL_IRQ_EPILOGUE();
+}
+
+/**
+ * @brief USART0 TX interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(AVR_SD1_TX_VECT) {
+ msg_t b;
+
+ OSAL_IRQ_PROLOGUE();
+
+ osalSysLockFromISR();
+ b = sdRequestDataI(&SD1);
+ osalSysUnlockFromISR();
+ if (b < MSG_OK)
+ UCSR0B &= ~(1 << UDRIE0);
+ else
+ UDR0 = b;
+
+ OSAL_IRQ_EPILOGUE();
+}
+#endif /* AVR_SERIAL_USE_USART0 */
+
+#if AVR_SERIAL_USE_USART1 || defined(__DOXYGEN__)
+/**
+ * @brief USART1 RX interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(AVR_SD2_RX_VECT) {
+ uint8_t sra;
+
+ OSAL_IRQ_PROLOGUE();
+
+ sra = UCSR1A;
+ if (sra & ((1 << DOR1) | (1 << UPE1) | (1 << FE1)))
+ set_error(sra, &SD2);
+ osalSysLockFromISR();
+ sdIncomingDataI(&SD2, UDR1);
+ osalSysUnlockFromISR();
+
+ OSAL_IRQ_EPILOGUE();
+}
+
+/**
+ * @brief USART1 TX interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(AVR_SD2_TX_VECT) {
+ msg_t b;
+
+ OSAL_IRQ_PROLOGUE();
+
+ osalSysLockFromISR();
+ b = sdRequestDataI(&SD2);
+ osalSysUnlockFromISR();
+ if (b < MSG_OK)
+ UCSR1B &= ~(1 << UDRIE1);
+ else
+ UDR1 = b;
+
+ OSAL_IRQ_EPILOGUE();
+}
+#endif /* AVR_SERIAL_USE_USART1 */
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level serial driver initialization.
+ *
+ * @notapi
+ */
+void sd_lld_init(void) {
+
+#if AVR_SERIAL_USE_USART0
+ sdObjectInit(&SD1, NULL, notify1);
+#endif
+#if AVR_SERIAL_USE_USART1
+ sdObjectInit(&SD2, NULL, notify2);
+#endif
+}
+
+/**
+ * @brief Low level serial driver configuration and (re)start.
+ *
+ * @param[in] sdp pointer to a @p SerialDriver object
+ * @param[in] config the architecture-dependent serial driver configuration.
+ * If this parameter is set to @p NULL then a default
+ * configuration is used.
+ *
+ * @notapi
+ */
+void sd_lld_start(SerialDriver *sdp, const SerialConfig *config) {
+
+ if (config == NULL)
+ config = &default_config;
+
+#if AVR_SERIAL_USE_USART0
+ if (&SD1 == sdp) {
+ usart0_init(config);
+ return;
+ }
+#endif
+#if AVR_SERIAL_USE_USART1
+ if (&SD2 == sdp) {
+ usart1_init(config);
+ return;
+ }
+#endif
+}
+
+/**
+ * @brief Low level serial driver stop.
+ * @details De-initializes the USART, stops the associated clock, resets the
+ * interrupt vector.
+ *
+ * @param[in] sdp pointer to a @p SerialDriver object
+ *
+ * @notapi
+ */
+void sd_lld_stop(SerialDriver *sdp) {
+
+#if AVR_SERIAL_USE_USART0
+ if (&SD1 == sdp)
+ usart0_deinit();
+#endif
+#if AVR_SERIAL_USE_USART1
+ if (&SD2 == sdp)
+ usart1_deinit();
+#endif
+}
+
+#endif /* HAL_USE_SERIAL */
+
+/** @} */
diff --git a/os/hal/ports/AVR/TINY/USARTv1/hal_serial_lld.h b/os/hal/ports/AVR/TINY/USARTv1/hal_serial_lld.h new file mode 100644 index 000000000..be53a0487 --- /dev/null +++ b/os/hal/ports/AVR/TINY/USARTv1/hal_serial_lld.h @@ -0,0 +1,158 @@ +/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file hal_serial_lld.h
+ * @brief AVR low level serial driver header.
+ *
+ * @addtogroup SERIAL
+ * @{
+ */
+
+#ifndef HAL_SERIAL_LLD_H
+#define HAL_SERIAL_LLD_H
+
+#if HAL_USE_SERIAL || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @brief USART0 driver enable switch.
+ * @details If set to @p TRUE the support for USART0 is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(AVR_SERIAL_USE_USART0) || defined(__DOXYGEN__)
+ #define AVR_SERIAL_USE_USART0 TRUE
+#endif
+
+/**
+ * @brief USART1 driver enable switch.
+ * @details If set to @p TRUE the support for USART1 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(AVR_SERIAL_USE_USART1) || defined(__DOXYGEN__)
+#define AVR_SERIAL_USE_USART1 TRUE
+#endif
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief AVR Serial Driver configuration structure.
+ * @details An instance of this structure must be passed to @p sdStart()
+ * in order to configure and start a serial driver operations.
+ */
+typedef struct {
+ /**
+ * @brief Initialization value for the BRR register.
+ */
+ uint16_t sc_brr;
+ /**
+ * @brief Number of bits per character (USART_CHAR_SIZE_5 to USART_CHAR_SIZE_9).
+ */
+ uint8_t sc_bits_per_char;
+} SerialConfig;
+
+/**
+ * @brief @p SerialDriver specific data.
+ */
+#define _serial_driver_data \
+ _base_asynchronous_channel_data \
+ /* Driver state.*/ \
+ sdstate_t state; \
+ /* Input queue.*/ \
+ input_queue_t iqueue; \
+ /* Output queue.*/ \
+ output_queue_t oqueue; \
+ /* Input circular buffer.*/ \
+ uint8_t ib[SERIAL_BUFFERS_SIZE]; \
+ /* Output circular buffer.*/ \
+ uint8_t ob[SERIAL_BUFFERS_SIZE]; \
+ /* End of the mandatory fields.*/
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/**
+ * @brief Macro for baud rate computation.
+ * @note Make sure the final baud rate is within tolerance.
+ */
+#define UBRR(b) (((F_CPU / b) >> 4) - 1)
+
+/**
+ * @brief Macro for baud rate computation when U2Xn == 1.
+ * @note Make sure the final baud rate is within tolerance.
+ */
+#define UBRR2x(b) (((F_CPU / b) >> 3) - 1)
+
+/**
+* @brief Macro for baud rate computation.
+* @note Make sure the final baud rate is within tolerance.
+* @note This version uses floating point math for greater accuracy.
+*/
+#define UBRR_F(b) ((((double) F_CPU / (double) b) / 16.0) - 0.5)
+
+/**
+* @brief Macro for baud rate computation when U2Xn == 1.
+* @note Make sure the final baud rate is within tolerance.
+* @note This version uses floating point math for greater accuracy.
+*/
+#define UBRR2x_F(b) ((((double) F_CPU / (double) b) / 8.0) - 0.5)
+
+#define USART_CHAR_SIZE_5 0
+#define USART_CHAR_SIZE_6 1
+#define USART_CHAR_SIZE_7 2
+#define USART_CHAR_SIZE_8 3
+#define USART_CHAR_SIZE_9 4
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#if AVR_SERIAL_USE_USART0 && !defined(__DOXYGEN__)
+extern SerialDriver SD1;
+#endif
+#if AVR_SERIAL_USE_USART1 && !defined(__DOXYGEN__)
+extern SerialDriver SD2;
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void sd_lld_init(void);
+ void sd_lld_start(SerialDriver *sdp, const SerialConfig *config);
+ void sd_lld_stop(SerialDriver *sdp);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_SERIAL */
+
+#endif /* HAL_SERIAL_LLD_H */
+
+/** @} */
diff --git a/os/hal/ports/AVR/TINY/USARTv1/hal_uart_lld.c b/os/hal/ports/AVR/TINY/USARTv1/hal_uart_lld.c new file mode 100644 index 000000000..1006e1509 --- /dev/null +++ b/os/hal/ports/AVR/TINY/USARTv1/hal_uart_lld.c @@ -0,0 +1,227 @@ +/*
+ ChibiOS - Copyright (C) 2017 Theodore Ateba
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file USARTv1/hal_uart_lld.c
+ * @brief AVR low level UART driver code.
+ *
+ * @addtogroup UART
+ * @{
+ */
+
+#include "hal.h"
+
+#if HAL_USE_UART || defined(__DOXYGEN__)
+
+/*==========================================================================*/
+/* Macros definition. */
+/*==========================================================================*/
+#define UBRR(b) (((F_CPU / b) >> 5) - 1)
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/** @brief USART1 UART driver identifier.*/
+#if AVR_UART_USE_USART1 || defined(__DOXYGEN__)
+UARTDriver UARTD1;
+#endif
+
+/** @brief USART2 UART driver identifier.*/
+#if AVR_UART_USE_USART2 || defined(__DOXYGEN__)
+UARTDriver UARTD2;
+#endif
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/**
+ * @brief USART de-initialization.
+ * @details This function must be invoked with interrupts disabled.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ */
+static void usart_stop(UARTDriver *uartp) {
+
+#if AVR_UART_USE_USART1
+ LINCR &= ~(1 << LENA); /* Disable LIN/UART controller. */
+#endif
+}
+
+/**
+ * @brief USART initialization.
+ * @details This function must be invoked with interrupts disabled.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ */
+static void usart_start(UARTDriver *uartp) {
+
+ /* Defensive programming, starting from a clean state.*/
+ usart_stop(uartp);
+
+#if AVR_UART_USE_USART1
+ /* Compute bit time. */
+ uint16_t BIT_TIME = UBRR(uartp->config->speed);
+
+ /* Set UART baudrate. */
+ LINBRRH |= (uint8_t) (((BIT_TIME) >> 8) & 0x0F);
+ LINBRRL |= (uint8_t) (BIT_TIME);
+
+ /* Enable LIN/UART controller. */
+ LINCR |= (1 << LENA);
+#endif
+}
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+#if AVR_UART_USE_USART1 || defined(__DOXYGEN__)
+/**
+ * @brief USART1 IRQ handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(LIN_TC_vect) {
+
+ OSAL_IRQ_PROLOGUE();
+
+ // TODO: Manage the UART IRQ.
+
+ OSAL_IRQ_EPILOGUE();
+}
+#endif /* AVR_UART_USE_USART1 */
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level UART driver initialization.
+ *
+ * @notapi
+ */
+void uart_lld_init(void) {
+
+#if AVR_UART_USE_USART1
+ uartObjectInit(&UARTD1);
+#endif
+}
+
+/**
+ * @brief Configures and activates the UART peripheral.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ *
+ * @notapi
+ */
+void uart_lld_start(UARTDriver *uartp) {
+
+ if (uartp->state == UART_STOP) {
+#if AVR_UART_USE_USART1
+ if (&UARTD1 == uartp) {
+
+ /* Set the full duplex. */
+ LINCR |= (1 << LCMD2);
+ LINCR |= (1 << LCMD1);
+ LINCR |= (1 << LCMD0);
+
+ /* Set the Uart data format: 8-bit data, no parity, 1 stop-bit. */
+ LINCR &= ~(1 << LCONF1);
+ LINCR &= ~(1 << LCONF0);
+ }
+#endif
+ }
+
+ uartp->rxstate = UART_RX_IDLE;
+ uartp->txstate = UART_TX_IDLE;
+ usart_start(uartp);
+}
+
+/**
+ * @brief Deactivates the UART peripheral.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ *
+ * @notapi
+ */
+void uart_lld_stop(UARTDriver *uartp) {
+
+ if (uartp->state == UART_READY) {
+ usart_stop(uartp);
+
+#if AVR_UART_USE_USART1
+ if (&UARTD1 == uartp) {
+ return;
+ }
+#endif
+ }
+}
+
+/**
+ * @brief Starts a transmission on the UART peripheral.
+ * @note The buffers are organized as uint8_t arrays for data sizes below
+ * or equal to 8 bits else it is organized as uint16_t arrays.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ * @param[in] n number of data frames to send
+ * @param[in] txbuf the pointer to the transmit buffer
+ *
+ * @notapi
+ */
+void uart_lld_start_send(UARTDriver *uartp, size_t n, const uint8_t *txbuf) {
+
+#if AVR_UART_USE_USART1
+ if (&UARTD1 == uartp) {
+ /* Starting transfer.*/
+ while(n--) {
+ while (LINSIR & (1 << LBUSY));
+ LINDAT = *txbuf;
+ txbuf++;
+ }
+ }
+#endif
+}
+
+/**
+ * @brief Starts a receive operation on the UART peripheral.
+ * @note The buffers are organized as uint8_t arrays for data sizes below
+ * or equal to 8 bits else it is organized as uint16_t arrays.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ * @param[in] n number of data frames to send
+ * @param[out] rxbuf the pointer to the receive buffer
+ *
+ * @notapi
+ */
+void uart_lld_start_receive(UARTDriver *uartp, size_t n, void *rxbuf) {
+
+ /* Stopping previous activity (idle state).*/
+ // TODO: Implement this function.
+}
+
+#endif /* HAL_USE_UART */
+
+/** @} */
diff --git a/os/hal/ports/AVR/TINY/USARTv1/hal_uart_lld.h b/os/hal/ports/AVR/TINY/USARTv1/hal_uart_lld.h new file mode 100644 index 000000000..587b2be19 --- /dev/null +++ b/os/hal/ports/AVR/TINY/USARTv1/hal_uart_lld.h @@ -0,0 +1,217 @@ +/*
+ ChibiOS - Copyright (C) 2017 Theodore Ateba
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file USARTv1/hal_uart_lld.h
+ * @brief AVR low level UART driver header.
+ *
+ * @addtogroup UART
+ * @{
+ */
+
+#ifndef HAL_UART_LLD_H
+#define HAL_UART_LLD_H
+
+#if HAL_USE_UART || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @name Configuration options
+ * @{
+ */
+/**
+ * @brief UART driver on USART1 enable switch.
+ * @details If set to @p TRUE the support for USART1 is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(AVR_UART_USE_USART1) || defined(__DOXYGEN__)
+#define AVR_UART_USE_USART1 FALSE
+#endif
+
+/**
+ * @brief UART driver on USART2 enable switch.
+ * @details If set to @p TRUE the support for USART2 is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(AVR_UART_USE_USART2) || defined(__DOXYGEN__)
+#define AVR_UART_USE_USART2 FALSE
+#endif
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief UART driver condition flags type.
+ */
+typedef uint32_t uartflags_t;
+
+/**
+ * @brief Structure representing an UART driver.
+ */
+typedef struct UARTDriver UARTDriver;
+
+/**
+ * @brief Generic UART notification callback type.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ */
+typedef void (*uartcb_t)(UARTDriver *uartp);
+
+/**
+ * @brief Character received UART notification callback type.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ * @param[in] c received character
+ */
+typedef void (*uartccb_t)(UARTDriver *uartp, uint16_t c);
+
+/**
+ * @brief Receive error UART notification callback type.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ * @param[in] e receive error mask
+ */
+typedef void (*uartecb_t)(UARTDriver *uartp, uartflags_t e);
+
+/**
+ * @brief Driver configuration structure.
+ * @note It could be empty on some architectures.
+ */
+typedef struct {
+ /**
+ * @brief End of transmission buffer callback.
+ */
+ uartcb_t txend1_cb;
+ /**
+ * @brief Physical end of transmission callback.
+ */
+ uartcb_t txend2_cb;
+ /**
+ * @brief Receive buffer filled callback.
+ */
+ uartcb_t rxend_cb;
+ /**
+ * @brief Character received while out if the @p UART_RECEIVE state.
+ */
+ uartccb_t rxchar_cb;
+ /**
+ * @brief Receive error callback.
+ */
+ uartecb_t rxerr_cb;
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Bit rate.
+ */
+ uint32_t speed;
+} UARTConfig;
+
+/**
+ * @brief Structure representing an UART driver.
+ */
+struct UARTDriver {
+ /**
+ * @brief Driver state.
+ */
+ uartstate_t state;
+ /**
+ * @brief Transmitter state.
+ */
+ uarttxstate_t txstate;
+ /**
+ * @brief Receiver state.
+ */
+ uartrxstate_t rxstate;
+ /**
+ * @brief Current configuration data.
+ */
+ const UARTConfig *config;
+#if (UART_USE_WAIT == TRUE) || defined(__DOXYGEN__)
+ /**
+ * @brief Synchronization flag for transmit operations.
+ */
+ bool early;
+ /**
+ * @brief Waiting thread on RX.
+ */
+ thread_reference_t threadrx;
+ /**
+ * @brief Waiting thread on TX.
+ */
+ thread_reference_t threadtx;
+#endif /* UART_USE_WAIT */
+#if (UART_USE_MUTUAL_EXCLUSION == TRUE) || defined(__DOXYGEN__)
+ /**
+ * @brief Mutex protecting the peripheral.
+ */
+ mutex_t mutex;
+#endif /* UART_USE_MUTUAL_EXCLUSION */
+#if defined(UART_DRIVER_EXT_FIELDS)
+ UART_DRIVER_EXT_FIELDS
+#endif
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Default receive buffer while into @p UART_RX_IDLE state.
+ */
+ volatile uint16_t rxbuf;
+};
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#if AVR_UART_USE_USART1 && !defined(__DOXYGEN__)
+extern UARTDriver UARTD1;
+#endif
+
+#if AVR_UART_USE_USART2 && !defined(__DOXYGEN__)
+extern UARTDriver UARTD2;
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void uart_lld_init(void);
+ void uart_lld_start(UARTDriver *uartp);
+ void uart_lld_stop(UARTDriver *uartp);
+ void uart_lld_start_send(UARTDriver *uartp, size_t n, const uint8_t *txbuf);
+ size_t uart_lld_stop_send(UARTDriver *uartp);
+ void uart_lld_start_receive(UARTDriver *uartp, size_t n, void *rxbuf);
+ size_t uart_lld_stop_receive(UARTDriver *uartp);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_UART */
+
+#endif /* HAL_UART_LLD_H */
+
+/** @} */
diff --git a/os/hal/ports/AVR/TINY/avr_pins.h b/os/hal/ports/AVR/TINY/avr_pins.h new file mode 100644 index 000000000..b98ce2574 --- /dev/null +++ b/os/hal/ports/AVR/TINY/avr_pins.h @@ -0,0 +1,159 @@ +/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#ifndef AVR_PINS_H
+#define AVR_PINS_H
+
+#include <avr/io.h>
+
+#if AVR_SPI_USE_SPI1
+
+#if defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__) || defined(__AVR_ATmega162__)
+ #define PIN_SPI1 PINB
+ #define PORT_SPI1 PORTB
+ #define DDR_SPI1 DDRB
+ #define SPI1_SS 4
+ #define SPI1_SCK 7
+ #define SPI1_MOSI 5
+ #define SPI1_MISO 6
+#elif defined(__AVR_ATmega328P__)
+ #define PIN_SPI1 PINB
+ #define PORT_SPI1 PORTB
+ #define DDR_SPI1 DDRB
+ #define SPI1_SS 2
+ #define SPI1_SCK 5
+ #define SPI1_MOSI 3
+ #define SPI1_MISO 4
+#elif defined(__AVR_ATmega2560__) || \
+ defined(__AVR_ATmega1280__) || \
+ defined(__AVR_ATmega128__)
+ #define PIN_SPI1 PINB
+ #define PORT_SPI1 PORTB
+ #define DDR_SPI1 DDRB
+ #define SPI1_SS 0
+ #define SPI1_SCK 1
+ #define SPI1_MOSI 2
+ #define SPI1_MISO 3
+#elif defined(__AVR_AT90CAN128__) || \
+ defined(__AVR_AT90CAN64__) || \
+ defined(__AVR_AT90CAN32__)
+ #define PIN_SPI1 PINB
+ #define PORT_SPI1 PORTB
+ #define DDR_SPI1 DDRB
+ #define SPI1_SS 0
+ #define SPI1_SCK 1
+ #define SPI1_MOSI 2
+ #define SPI1_MISO 3
+#else
+ #warning "Device not supported by SPI driver"
+#endif
+
+#endif /* AVR_SPI_USE_SPI1 */
+
+#if AVR_ADC_USE_ADC1
+
+#if defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__)
+ #define PINADC PINA
+ #define PORTADC PORTA
+ #define DDRADC DDRA
+#elif defined(__AVR_ATmega328P__)
+ #define PINADC PINC
+ #define PORTADC PORTC
+ #define DDRADC DDRC
+#elif defined(__AVR_ATmega2560__) || \
+ defined(__AVR_ATmega1280__) || \
+ defined(__AVR_ATmega128__)
+ #define PINADC PINF
+ #define PORTADC PORTF
+ #define DDRADC DDRF
+#elif defined(__AVR_AT90CAN128__) || \
+ defined(__AVR_AT90CAN64__) || \
+ defined(__AVR_AT90CAN32__)
+ #define PINADC PINF
+ #define PORTADC PORTF
+ #define DDRADC DDRF
+#else
+ #warning "Device not supported by ADC driver"
+#endif
+
+#endif /* AVR_ADC_USE_ADC1 */
+
+#if AVR_EXT_USE_PCINT0
+#if defined(__AVR_ATmega162__)
+ #define PCINT0_PIN PINA
+#elif defined(__AVR_ATmega328P__) || \
+ defined(__AVR_ATmega1280__) || \
+ defined(__AVR_ATmega2560__)
+ #define PCINT0_PIN PINB
+#else
+ #warning "Device not supported by EXT driver"
+#endif
+#endif /* AVR_EXT_USE_PCINT0 */
+
+#if AVR_EXT_USE_PCINT1
+#if defined(__AVR_ATmega162__) || \
+ defined(__AVR_ATmega328P__)
+ #define PCINT1_PIN PINC
+#elif defined(__AVR_ATmega1280__) || \
+ defined(__AVR_ATmega2560__)
+ #define PCINT1_PIN PINE
+#else
+ #warning "Device not supported by EXT driver"
+#endif
+#endif /* AVR_EXT_USE_PCINT1 */
+
+#if AVR_EXT_USE_PCINT2
+#if defined(__AVR_ATmega1280__) || \
+ defined(__AVR_ATmega2560__)
+ #define PCINT2_PIN PINK
+#else
+ #warning "Device not supported by EXT driver"
+#endif
+#endif /* AVR_EXT_USE_PCINT2 */
+
+#if AVR_EXT_USE_PCINT3
+#warning "Device not supported by EXT driver"
+#endif /* AVR_EXT_USE_PCINT3 */
+
+#if AVR_EXT_USE_PCINT4
+#warning "Device not supported by EXT driver"
+#endif /* AVR_EXT_USE_PCINT4 */
+
+#if AVR_EXT_USE_PCINT5
+#warning "Device not supported by EXT driver"
+#endif /* AVR_EXT_USE_PCINT5 */
+
+#if AVR_EXT_USE_PCINT6
+#warning "Device not supported by EXT driver"
+#endif /* AVR_EXT_USE_PCINT6 */
+
+#if AVR_EXT_USE_PCINT7
+#warning "Device not supported by EXT driver"
+#endif /* AVR_EXT_USE_PCINT7 */
+
+#if AVR_EXT_USE_PCINT8
+#warning "Device not supported by EXT driver"
+#endif /* AVR_EXT_USE_PCINT8 */
+
+#if AVR_EXT_USE_PCINT9
+#warning "Device not supported by EXT driver"
+#endif /* AVR_EXT_USE_PCINT9 */
+
+#if AVR_EXT_USE_PCINT10
+#warning "Device not supported by EXT driver"
+#endif /* AVR_EXT_USE_PCINT10 */
+
+#endif /* AVR_PINS_H */
diff --git a/os/hal/ports/AVR/TINY/avr_timers.h b/os/hal/ports/AVR/TINY/avr_timers.h new file mode 100644 index 000000000..42c275e20 --- /dev/null +++ b/os/hal/ports/AVR/TINY/avr_timers.h @@ -0,0 +1,55 @@ +/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#ifndef AVR_TIMERS_H
+#define AVR_TIMERS_H
+
+#include "mcuconf.h"
+
+#if ((OSAL_ST_MODE == OSAL_ST_MODE_FREERUNNING) && \
+ (AVR_GPT_USE_TIM1 || AVR_PWM_USE_TIM1 || AVR_ICU_USE_TIM1))
+ #error "Timer 1 cannot be used by drivers when running in tickless mode."
+#endif
+
+#if ((AVR_GPT_USE_TIM1 && AVR_PWM_USE_TIM1) || \
+ (AVR_GPT_USE_TIM1 && AVR_ICU_USE_TIM1) || \
+ (AVR_PWM_USE_TIM1 && AVR_ICU_USE_TIM1))
+ #error "Timer 1 cannot simultaneously be used by multiple drivers."
+#endif
+
+#if ((AVR_GPT_USE_TIM2 && AVR_PWM_USE_TIM2))
+ #error "Timer 2 cannot simultaneously be used by multiple drivers."
+#endif
+
+#if ((AVR_GPT_USE_TIM3 && AVR_PWM_USE_TIM3) || \
+ (AVR_GPT_USE_TIM3 && AVR_ICU_USE_TIM3) || \
+ (AVR_PWM_USE_TIM3 && AVR_ICU_USE_TIM3))
+ #error "Timer 3 cannot simultaneously be used by multiple drivers."
+#endif
+
+#if ((AVR_GPT_USE_TIM4 && AVR_PWM_USE_TIM4) || \
+ (AVR_GPT_USE_TIM4 && AVR_ICU_USE_TIM4) || \
+ (AVR_PWM_USE_TIM4 && AVR_ICU_USE_TIM4))
+ #error "Timer 4 cannot simultaneously be used by multiple drivers."
+#endif
+
+#if ((AVR_GPT_USE_TIM5 && AVR_PWM_USE_TIM5) || \
+ (AVR_GPT_USE_TIM5 && AVR_ICU_USE_TIM5) || \
+ (AVR_PWM_USE_TIM5 && AVR_ICU_USE_TIM5))
+ #error "Timer 5 cannot simultaneously be used by multiple drivers."
+#endif
+
+#endif /* AVR_TIMERS_H */
diff --git a/os/hal/ports/AVR/TINY/hal_lld.c b/os/hal/ports/AVR/TINY/hal_lld.c new file mode 100644 index 000000000..fef8b7084 --- /dev/null +++ b/os/hal/ports/AVR/TINY/hal_lld.c @@ -0,0 +1,55 @@ +/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file hal_lld.c
+ * @brief AVR HAL subsystem low level driver code.
+ *
+ * @addtogroup HAL
+ * @{
+ */
+
+#include "hal.h"
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level HAL driver initialization.
+ *
+ * @notapi
+ */
+void hal_lld_init(void) {
+}
+
+/** @} */
diff --git a/os/hal/ports/AVR/TINY/hal_lld.h b/os/hal/ports/AVR/TINY/hal_lld.h new file mode 100644 index 000000000..eca18ffc3 --- /dev/null +++ b/os/hal/ports/AVR/TINY/hal_lld.h @@ -0,0 +1,72 @@ +/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file hal_lld.h
+ * @brief AVR HAL subsystem low level driver header.
+ *
+ * @addtogroup HAL
+ * @{
+ */
+
+#ifndef HAL_LLD_H
+#define HAL_LLD_H
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/**
+ * @brief Defines the support for realtime counters in the HAL.
+ */
+#define HAL_IMPLEMENTS_COUNTERS FALSE
+
+/**
+ * @brief Platform name.
+ */
+#define PLATFORM_NAME "AVR"
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void hal_lld_init(void);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_LLD_H */
+
+/** @} */
diff --git a/os/hal/ports/AVR/TINY/platform.mk b/os/hal/ports/AVR/TINY/platform.mk new file mode 100644 index 000000000..9635f6267 --- /dev/null +++ b/os/hal/ports/AVR/TINY/platform.mk @@ -0,0 +1,11 @@ +# List of all the AVR platform files.
+PLATFORMSRC = ${CHIBIOS}/os/hal/ports/AVR/TINY/hal_lld.c
+
+# Required include directories
+PLATFORMINC = ${CHIBIOS}/os/hal/ports/AVR/MEGA
+
+# Drivers compatible with the platform.
+PLATFORMINC = ${CHIBIOS}/os/hal/ports/AVR/TINY
+include ${CHIBIOS}/os/hal/ports/AVR/TINY/GPIOv1/driver.mk
+include ${CHIBIOS}/os/hal/ports/AVR/TINY/TIMv1/driver.mk
+include ${CHIBIOS}/os/hal/ports/AVR/TINY/USARTv1/driver.mk
|