diff options
| -rw-r--r-- | demos/ARMCM3-STM32F100-DISCOVERY/.cproject | 52 | ||||
| -rw-r--r-- | demos/ARMCM3-STM32F100-DISCOVERY/.project | 43 | ||||
| -rw-r--r-- | demos/ARMCM3-STM32F103/.cproject | 56 | ||||
| -rw-r--r-- | demos/ARMCM3-STM32F103/.project | 43 | ||||
| -rw-r--r-- | demos/ARMCM3-STM32L152-DISCOVERY/.cproject | 52 | ||||
| -rw-r--r-- | demos/ARMCM3-STM32L152-DISCOVERY/.project | 43 | ||||
| -rw-r--r-- | demos/ARMCM4-STM32F407-DISCOVERY-MEMS/.cproject | 52 | ||||
| -rw-r--r-- | demos/ARMCM4-STM32F407-DISCOVERY-MEMS/.project | 43 | ||||
| -rw-r--r-- | demos/ARMCM4-STM32F407-DISCOVERY-MEMS/Makefile | 224 | ||||
| -rw-r--r-- | demos/ARMCM4-STM32F407-DISCOVERY-MEMS/chconf.h | 535 | ||||
| -rw-r--r-- | demos/ARMCM4-STM32F407-DISCOVERY-MEMS/halconf.h | 342 | ||||
| -rw-r--r-- | demos/ARMCM4-STM32F407-DISCOVERY-MEMS/main.c | 213 | ||||
| -rw-r--r-- | demos/ARMCM4-STM32F407-DISCOVERY-MEMS/mcuconf.h | 239 | ||||
| -rw-r--r-- | demos/ARMCM4-STM32F407-DISCOVERY-MEMS/readme.txt | 30 | ||||
| -rw-r--r-- | demos/ARMCM4-STM32F407-DISCOVERY/main.c | 19 | ||||
| -rw-r--r-- | demos/ARMCM4-STM32F407-DISCOVERY/mcuconf.h | 2 | ||||
| -rw-r--r-- | readme.txt | 3 |
17 files changed, 1971 insertions, 20 deletions
diff --git a/demos/ARMCM3-STM32F100-DISCOVERY/.cproject b/demos/ARMCM3-STM32F100-DISCOVERY/.cproject new file mode 100644 index 000000000..4398edd6e --- /dev/null +++ b/demos/ARMCM3-STM32F100-DISCOVERY/.cproject @@ -0,0 +1,52 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?>
+
+<cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+ <storageModule moduleId="org.eclipse.cdt.core.settings">
+ <cconfiguration id="0.1827273956">
+ <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.1827273956" moduleId="org.eclipse.cdt.core.settings" name="Default">
+ <externalSettings/>
+ <extensions>
+ <extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ </extensions>
+ </storageModule>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <configuration artifactName="${ProjName}" buildProperties="" description="" id="0.1827273956" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+ <folderInfo id="0.1827273956." name="/" resourcePath="">
+ <toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.1456900514" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+ <targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.1456900514.1338980260" name=""/>
+ <builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.839007137" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="false" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+ <tool id="org.eclipse.cdt.build.core.settings.holder.libs.2141636730" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+ <tool id="org.eclipse.cdt.build.core.settings.holder.1643899354" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+ <inputType id="org.eclipse.cdt.build.core.settings.holder.inType.614072591" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+ </tool>
+ <tool id="org.eclipse.cdt.build.core.settings.holder.1528382871" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+ <inputType id="org.eclipse.cdt.build.core.settings.holder.inType.954385493" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+ </tool>
+ <tool id="org.eclipse.cdt.build.core.settings.holder.147962527" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+ <inputType id="org.eclipse.cdt.build.core.settings.holder.inType.520918700" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+ </tool>
+ </toolChain>
+ </folderInfo>
+ </configuration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+ </cconfiguration>
+ </storageModule>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <project id="ARMCM3-STM32F100-DISCOVERY.null.2060827252" name="ARMCM3-STM32F100-DISCOVERY"/>
+ </storageModule>
+ <storageModule moduleId="scannerConfiguration">
+ <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+ <scannerConfigBuildInfo instanceId="0.1827273956">
+ <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+ </scannerConfigBuildInfo>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+ <storageModule moduleId="refreshScope"/>
+</cproject>
diff --git a/demos/ARMCM3-STM32F100-DISCOVERY/.project b/demos/ARMCM3-STM32F100-DISCOVERY/.project new file mode 100644 index 000000000..778be5cc4 --- /dev/null +++ b/demos/ARMCM3-STM32F100-DISCOVERY/.project @@ -0,0 +1,43 @@ +<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+ <name>ARMCM3-STM32F100-DISCOVERY</name>
+ <comment></comment>
+ <projects>
+ </projects>
+ <buildSpec>
+ <buildCommand>
+ <name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+ <triggers>clean,full,incremental,</triggers>
+ <arguments>
+ </arguments>
+ </buildCommand>
+ <buildCommand>
+ <name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+ <triggers>full,incremental,</triggers>
+ <arguments>
+ </arguments>
+ </buildCommand>
+ </buildSpec>
+ <natures>
+ <nature>org.eclipse.cdt.core.cnature</nature>
+ <nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+ <nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+ </natures>
+ <linkedResources>
+ <link>
+ <name>board</name>
+ <type>2</type>
+ <locationURI>CHIBIOS/boards/ST_STM32VL_DISCOVERY</locationURI>
+ </link>
+ <link>
+ <name>os</name>
+ <type>2</type>
+ <locationURI>CHIBIOS/os</locationURI>
+ </link>
+ <link>
+ <name>test</name>
+ <type>2</type>
+ <locationURI>CHIBIOS/test</locationURI>
+ </link>
+ </linkedResources>
+</projectDescription>
diff --git a/demos/ARMCM3-STM32F103/.cproject b/demos/ARMCM3-STM32F103/.cproject new file mode 100644 index 000000000..3eb8aa88c --- /dev/null +++ b/demos/ARMCM3-STM32F103/.cproject @@ -0,0 +1,56 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?>
+
+<cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+ <storageModule moduleId="org.eclipse.cdt.core.settings">
+ <cconfiguration id="0.2040543026">
+ <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.2040543026" moduleId="org.eclipse.cdt.core.settings" name="Default">
+ <externalSettings/>
+ <extensions>
+ <extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ </extensions>
+ </storageModule>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <configuration artifactName="${ProjName}" buildProperties="" description="" id="0.2040543026" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+ <folderInfo id="0.2040543026." name="/" resourcePath="">
+ <toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.318801405" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+ <targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.318801405.1372735177" name=""/>
+ <builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.1609542497" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+ <tool id="org.eclipse.cdt.build.core.settings.holder.libs.635426407" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+ <tool id="org.eclipse.cdt.build.core.settings.holder.1428343319" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+ <inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1654209049" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+ </tool>
+ <tool id="org.eclipse.cdt.build.core.settings.holder.420981810" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+ <inputType id="org.eclipse.cdt.build.core.settings.holder.inType.181124718" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+ </tool>
+ <tool id="org.eclipse.cdt.build.core.settings.holder.1819860137" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+ <inputType id="org.eclipse.cdt.build.core.settings.holder.inType.454811191" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+ </tool>
+ </toolChain>
+ </folderInfo>
+ </configuration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+ </cconfiguration>
+ </storageModule>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <project id="ARMCM3-STM32F103.null.700339648" name="ARMCM3-STM32F103"/>
+ </storageModule>
+ <storageModule moduleId="scannerConfiguration">
+ <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+ <scannerConfigBuildInfo instanceId="0.2040543026">
+ <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+ </scannerConfigBuildInfo>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+ <storageModule moduleId="refreshScope" versionNumber="2">
+ <configuration configurationName="Default">
+ <resource resourceType="PROJECT" workspacePath="/ARMCM3-STM32F103"/>
+ </configuration>
+ </storageModule>
+</cproject>
diff --git a/demos/ARMCM3-STM32F103/.project b/demos/ARMCM3-STM32F103/.project new file mode 100644 index 000000000..a0f144eb0 --- /dev/null +++ b/demos/ARMCM3-STM32F103/.project @@ -0,0 +1,43 @@ +<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+ <name>ARMCM3-STM32F103</name>
+ <comment></comment>
+ <projects>
+ </projects>
+ <buildSpec>
+ <buildCommand>
+ <name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+ <triggers>clean,full,incremental,</triggers>
+ <arguments>
+ </arguments>
+ </buildCommand>
+ <buildCommand>
+ <name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+ <triggers>full,incremental,</triggers>
+ <arguments>
+ </arguments>
+ </buildCommand>
+ </buildSpec>
+ <natures>
+ <nature>org.eclipse.cdt.core.cnature</nature>
+ <nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+ <nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+ </natures>
+ <linkedResources>
+ <link>
+ <name>board</name>
+ <type>2</type>
+ <location>C:/ChibiStudio/chibios/boards/OLIMEX_STM32_P103</location>
+ </link>
+ <link>
+ <name>os</name>
+ <type>2</type>
+ <locationURI>CHIBIOS/os</locationURI>
+ </link>
+ <link>
+ <name>test</name>
+ <type>2</type>
+ <locationURI>CHIBIOS/test</locationURI>
+ </link>
+ </linkedResources>
+</projectDescription>
diff --git a/demos/ARMCM3-STM32L152-DISCOVERY/.cproject b/demos/ARMCM3-STM32L152-DISCOVERY/.cproject new file mode 100644 index 000000000..30af73e1e --- /dev/null +++ b/demos/ARMCM3-STM32L152-DISCOVERY/.cproject @@ -0,0 +1,52 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?>
+
+<cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+ <storageModule moduleId="org.eclipse.cdt.core.settings">
+ <cconfiguration id="0.148319432">
+ <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.148319432" moduleId="org.eclipse.cdt.core.settings" name="Default">
+ <externalSettings/>
+ <extensions>
+ <extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ </extensions>
+ </storageModule>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <configuration artifactName="${ProjName}" buildProperties="" description="" id="0.148319432" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+ <folderInfo id="0.148319432." name="/" resourcePath="">
+ <toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.863682539" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+ <targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.863682539.1873537420" name=""/>
+ <builder id="org.eclipse.cdt.build.core.settings.default.builder.382775606" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+ <tool id="org.eclipse.cdt.build.core.settings.holder.libs.831890241" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+ <tool id="org.eclipse.cdt.build.core.settings.holder.311245100" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+ <inputType id="org.eclipse.cdt.build.core.settings.holder.inType.2050686859" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+ </tool>
+ <tool id="org.eclipse.cdt.build.core.settings.holder.1590707511" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+ <inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1777684982" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+ </tool>
+ <tool id="org.eclipse.cdt.build.core.settings.holder.756242520" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+ <inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1815847853" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+ </tool>
+ </toolChain>
+ </folderInfo>
+ </configuration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+ </cconfiguration>
+ </storageModule>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <project id="ARMCM3-STM32L152-DISCOVERY.null.1127376542" name="ARMCM3-STM32L152-DISCOVERY"/>
+ </storageModule>
+ <storageModule moduleId="scannerConfiguration">
+ <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+ <scannerConfigBuildInfo instanceId="0.148319432">
+ <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+ </scannerConfigBuildInfo>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+ <storageModule moduleId="refreshScope"/>
+</cproject>
diff --git a/demos/ARMCM3-STM32L152-DISCOVERY/.project b/demos/ARMCM3-STM32L152-DISCOVERY/.project new file mode 100644 index 000000000..a1f6875a8 --- /dev/null +++ b/demos/ARMCM3-STM32L152-DISCOVERY/.project @@ -0,0 +1,43 @@ +<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+ <name>ARMCM3-STM32L152-DISCOVERY</name>
+ <comment></comment>
+ <projects>
+ </projects>
+ <buildSpec>
+ <buildCommand>
+ <name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+ <triggers>clean,full,incremental,</triggers>
+ <arguments>
+ </arguments>
+ </buildCommand>
+ <buildCommand>
+ <name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+ <triggers>full,incremental,</triggers>
+ <arguments>
+ </arguments>
+ </buildCommand>
+ </buildSpec>
+ <natures>
+ <nature>org.eclipse.cdt.core.cnature</nature>
+ <nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+ <nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+ </natures>
+ <linkedResources>
+ <link>
+ <name>board</name>
+ <type>2</type>
+ <locationURI>CHIBIOS/boards/ST_STM32L_DISCOVERY</locationURI>
+ </link>
+ <link>
+ <name>os</name>
+ <type>2</type>
+ <locationURI>CHIBIOS/os</locationURI>
+ </link>
+ <link>
+ <name>test</name>
+ <type>2</type>
+ <locationURI>CHIBIOS/test</locationURI>
+ </link>
+ </linkedResources>
+</projectDescription>
diff --git a/demos/ARMCM4-STM32F407-DISCOVERY-MEMS/.cproject b/demos/ARMCM4-STM32F407-DISCOVERY-MEMS/.cproject new file mode 100644 index 000000000..4c0ec4132 --- /dev/null +++ b/demos/ARMCM4-STM32F407-DISCOVERY-MEMS/.cproject @@ -0,0 +1,52 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?>
+
+<cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+ <storageModule moduleId="org.eclipse.cdt.core.settings">
+ <cconfiguration id="0.114656749">
+ <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.114656749" moduleId="org.eclipse.cdt.core.settings" name="Default">
+ <externalSettings/>
+ <extensions>
+ <extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ </extensions>
+ </storageModule>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <configuration artifactName="${ProjName}" buildProperties="" description="" id="0.114656749" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+ <folderInfo id="0.114656749." name="/" resourcePath="">
+ <toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.1182750861" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+ <targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.1182750861.169007201" name=""/>
+ <builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.579570726" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+ <tool id="org.eclipse.cdt.build.core.settings.holder.libs.2143276802" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+ <tool id="org.eclipse.cdt.build.core.settings.holder.1873650595" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+ <inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1337802279" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+ </tool>
+ <tool id="org.eclipse.cdt.build.core.settings.holder.1707090075" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+ <inputType id="org.eclipse.cdt.build.core.settings.holder.inType.338985256" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+ </tool>
+ <tool id="org.eclipse.cdt.build.core.settings.holder.1165165914" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+ <inputType id="org.eclipse.cdt.build.core.settings.holder.inType.714476670" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+ </tool>
+ </toolChain>
+ </folderInfo>
+ </configuration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+ </cconfiguration>
+ </storageModule>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <project id="ARMCM4-STM32F407-DISCOVERY-ALT.null.1703860681" name="ARMCM4-STM32F407-DISCOVERY-ALT"/>
+ </storageModule>
+ <storageModule moduleId="scannerConfiguration">
+ <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+ <scannerConfigBuildInfo instanceId="0.114656749">
+ <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+ </scannerConfigBuildInfo>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+ <storageModule moduleId="refreshScope"/>
+</cproject>
diff --git a/demos/ARMCM4-STM32F407-DISCOVERY-MEMS/.project b/demos/ARMCM4-STM32F407-DISCOVERY-MEMS/.project new file mode 100644 index 000000000..eb135c367 --- /dev/null +++ b/demos/ARMCM4-STM32F407-DISCOVERY-MEMS/.project @@ -0,0 +1,43 @@ +<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+ <name>ARMCM4-STM32F407-DISCOVERY-MEMS</name>
+ <comment></comment>
+ <projects>
+ </projects>
+ <buildSpec>
+ <buildCommand>
+ <name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+ <triggers>clean,full,incremental,</triggers>
+ <arguments>
+ </arguments>
+ </buildCommand>
+ <buildCommand>
+ <name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+ <triggers>full,incremental,</triggers>
+ <arguments>
+ </arguments>
+ </buildCommand>
+ </buildSpec>
+ <natures>
+ <nature>org.eclipse.cdt.core.cnature</nature>
+ <nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+ <nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+ </natures>
+ <linkedResources>
+ <link>
+ <name>board</name>
+ <type>2</type>
+ <locationURI>CHIBIOS/boards/ST_STM32F4_DISCOVERY</locationURI>
+ </link>
+ <link>
+ <name>os</name>
+ <type>2</type>
+ <locationURI>CHIBIOS/os</locationURI>
+ </link>
+ <link>
+ <name>test</name>
+ <type>2</type>
+ <locationURI>CHIBIOS/test</locationURI>
+ </link>
+ </linkedResources>
+</projectDescription>
diff --git a/demos/ARMCM4-STM32F407-DISCOVERY-MEMS/Makefile b/demos/ARMCM4-STM32F407-DISCOVERY-MEMS/Makefile new file mode 100644 index 000000000..95fe53ba6 --- /dev/null +++ b/demos/ARMCM4-STM32F407-DISCOVERY-MEMS/Makefile @@ -0,0 +1,224 @@ +##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+ USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+ USE_COPT =
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+ USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+ USE_LINK_GC = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+ USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+ USE_VERBOSE_COMPILE = no
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Enables the use of FPU on Cortex-M4.
+# Enable this if you really want to use the STM FWLib.
+ifeq ($(USE_FPU),)
+ USE_FPU = no
+endif
+
+# Enable this if you really want to use the STM FWLib.
+ifeq ($(USE_FWLIB),)
+ USE_FWLIB = no
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../..
+include $(CHIBIOS)/boards/ST_STM32F4_DISCOVERY/board.mk
+include $(CHIBIOS)/os/hal/platforms/STM32F4xx/platform.mk
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F4xx/port.mk
+include $(CHIBIOS)/os/kernel/kernel.mk
+include $(CHIBIOS)/test/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(PORTLD)/STM32F407xG.ld
+#LDSCRIPT= $(PORTLD)/STM32F407xG_CCM.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(PORTSRC) \
+ $(KERNSRC) \
+ $(TESTSRC) \
+ $(HALSRC) \
+ $(PLATFORMSRC) \
+ $(BOARDSRC) \
+ $(CHIBIOS)/os/various/devices_lib/accel/lis302dl.c \
+ $(CHIBIOS)/os/various/chprintf.c \
+ main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+# option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+# option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+# option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+# option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(PORTASM)
+
+INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \
+ $(HALINC) $(PLATFORMINC) $(BOARDINC) \
+ $(CHIBIOS)/os/various/devices_lib/accel \
+ $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU = cortex-m4
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+# runtime support makes code size explode.
+LD = $(TRGT)gcc
+#LD = $(TRGT)g++
+CP = $(TRGT)objcopy
+AS = $(TRGT)gcc -x assembler-with-cpp
+OD = $(TRGT)objdump
+HEX = $(CP) -O ihex
+BIN = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of default section
+#
+
+# List all default C defines here, like -D_DEBUG=1
+DDEFS =
+
+# List all default ASM defines here, like -D_DEBUG=1
+DADEFS =
+
+# List all default directories to look for include files here
+DINCDIR =
+
+# List the default directory to look for the libraries here
+DLIBDIR =
+
+# List all default libraries here
+DLIBS =
+
+#
+# End of default section
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+ifeq ($(USE_FPU),yes)
+ USE_OPT += -mfloat-abi=softfp -mfpu=fpv4-sp-d16 -fsingle-precision-constant
+ DDEFS += -DCORTEX_USE_FPU=TRUE
+else
+ DDEFS += -DCORTEX_USE_FPU=FALSE
+endif
+
+ifeq ($(USE_FWLIB),yes)
+ include $(CHIBIOS)/ext/stm32lib/stm32lib.mk
+ CSRC += $(STM32SRC)
+ INCDIR += $(STM32INC)
+ USE_OPT += -DUSE_STDPERIPH_DRIVER
+endif
+
+include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk
diff --git a/demos/ARMCM4-STM32F407-DISCOVERY-MEMS/chconf.h b/demos/ARMCM4-STM32F407-DISCOVERY-MEMS/chconf.h new file mode 100644 index 000000000..b1f2cd62c --- /dev/null +++ b/demos/ARMCM4-STM32F407-DISCOVERY-MEMS/chconf.h @@ -0,0 +1,535 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
+ 2011,2012 Giovanni Di Sirio.
+
+ This file is part of ChibiOS/RT.
+
+ ChibiOS/RT is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ ChibiOS/RT is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/**
+ * @file templates/chconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ * setting also defines the system tick time unit.
+ */
+#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__)
+#define CH_FREQUENCY 1000
+#endif
+
+/**
+ * @brief Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ * threads before preemption occurs. Setting this value to zero
+ * disables the preemption for threads with equal priority and the
+ * round robin becomes cooperative. Note that higher priority
+ * threads can still preempt, the kernel is always preemptive.
+ *
+ * @note Disabling the round robin preemption makes the kernel more compact
+ * and generally faster.
+ */
+#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__)
+#define CH_TIME_QUANTUM 20
+#endif
+
+/**
+ * @brief Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ * then the whole available RAM is used. The core memory is made
+ * available to the heap allocator and/or can be used directly through
+ * the simplified core memory allocator.
+ *
+ * @note In order to let the OS manage the whole RAM the linker script must
+ * provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note Requires @p CH_USE_MEMCORE.
+ */
+#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__)
+#define CH_MEMCORE_SIZE 0
+#endif
+
+/**
+ * @brief Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ * does not spawn the idle thread automatically. The application has
+ * then the responsibility to do one of the following:
+ * - Spawn a custom idle thread at priority @p IDLEPRIO.
+ * - Change the main() thread priority to @p IDLEPRIO then enter
+ * an endless loop. In this scenario the @p main() thread acts as
+ * the idle thread.
+ * .
+ * @note Unless an idle thread is spawned the @p main() thread must not
+ * enter a sleep state.
+ */
+#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__)
+#define CH_NO_IDLE_THREAD FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ * is used when two possible implementations exist.
+ *
+ * @note This is not related to the compiler optimization options.
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__)
+#define CH_OPTIMIZE_SPEED TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__)
+#define CH_USE_REGISTRY TRUE
+#endif
+
+/**
+ * @brief Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__)
+#define CH_USE_WAITEXIT TRUE
+#endif
+
+/**
+ * @brief Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__)
+#define CH_USE_SEMAPHORES TRUE
+#endif
+
+/**
+ * @brief Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ * priority rather than in FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special requirements.
+ * @note Requires @p CH_USE_SEMAPHORES.
+ */
+#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__)
+#define CH_USE_SEMAPHORES_PRIORITY FALSE
+#endif
+
+/**
+ * @brief Atomic semaphore API.
+ * @details If enabled then the semaphores the @p chSemSignalWait() API
+ * is included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_USE_SEMAPHORES.
+ */
+#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__)
+#define CH_USE_SEMSW TRUE
+#endif
+
+/**
+ * @brief Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__)
+#define CH_USE_MUTEXES TRUE
+#endif
+
+/**
+ * @brief Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_USE_MUTEXES.
+ */
+#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__)
+#define CH_USE_CONDVARS TRUE
+#endif
+
+/**
+ * @brief Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ * specification are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_USE_CONDVARS.
+ */
+#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__)
+#define CH_USE_CONDVARS_TIMEOUT TRUE
+#endif
+
+/**
+ * @brief Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__)
+#define CH_USE_EVENTS TRUE
+#endif
+
+/**
+ * @brief Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ * are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_USE_EVENTS.
+ */
+#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__)
+#define CH_USE_EVENTS_TIMEOUT TRUE
+#endif
+
+/**
+ * @brief Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__)
+#define CH_USE_MESSAGES TRUE
+#endif
+
+/**
+ * @brief Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ * FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special requirements.
+ * @note Requires @p CH_USE_MESSAGES.
+ */
+#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__)
+#define CH_USE_MESSAGES_PRIORITY FALSE
+#endif
+
+/**
+ * @brief Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ * included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_USE_SEMAPHORES.
+ */
+#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__)
+#define CH_USE_MAILBOXES TRUE
+#endif
+
+/**
+ * @brief I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__)
+#define CH_USE_QUEUES TRUE
+#endif
+
+/**
+ * @brief Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__)
+#define CH_USE_MEMCORE TRUE
+#endif
+
+/**
+ * @brief Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or
+ * @p CH_USE_SEMAPHORES.
+ * @note Mutexes are recommended.
+ */
+#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__)
+#define CH_USE_HEAP TRUE
+#endif
+
+/**
+ * @brief C-runtime allocator.
+ * @details If enabled the the heap allocator APIs just wrap the C-runtime
+ * @p malloc() and @p free() functions.
+ *
+ * @note The default is @p FALSE.
+ * @note Requires @p CH_USE_HEAP.
+ * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the
+ * appropriate documentation.
+ */
+#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__)
+#define CH_USE_MALLOC_HEAP FALSE
+#endif
+
+/**
+ * @brief Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__)
+#define CH_USE_MEMPOOLS TRUE
+#endif
+
+/**
+ * @brief Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_USE_WAITEXIT.
+ * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS.
+ */
+#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__)
+#define CH_USE_DYNAMIC TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ * at runtime.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__)
+#define CH_DBG_SYSTEM_STATE_CHECK FALSE
+#endif
+
+/**
+ * @brief Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ * parameters are activated.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__)
+#define CH_DBG_ENABLE_CHECKS FALSE
+#endif
+
+/**
+ * @brief Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ * activated. This includes consistency checks inside the kernel,
+ * runtime anomalies and port-defined checks.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__)
+#define CH_DBG_ENABLE_ASSERTS FALSE
+#endif
+
+/**
+ * @brief Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ * activated.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__)
+#define CH_DBG_ENABLE_TRACE FALSE
+#endif
+
+/**
+ * @brief Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note The default is @p FALSE.
+ * @note The stack check is performed in a architecture/port dependent way.
+ * It may not be implemented or some ports.
+ * @note The default failure mode is to halt the system with the global
+ * @p panic_msg variable set to @p NULL.
+ */
+#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__)
+#define CH_DBG_ENABLE_STACK_CHECK FALSE
+#endif
+
+/**
+ * @brief Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ * value when a thread is created. This can be useful for the
+ * runtime measurement of the used stack.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__)
+#define CH_DBG_FILL_THREADS FALSE
+#endif
+
+/**
+ * @brief Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p Thread structure that
+ * counts the system ticks occurred while executing the thread.
+ *
+ * @note The default is @p TRUE.
+ * @note This debug option is defaulted to TRUE because it is required by
+ * some test cases into the test suite.
+ */
+#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__)
+#define CH_DBG_THREADS_PROFILING TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Threads descriptor structure extension.
+ * @details User fields added to the end of the @p Thread structure.
+ */
+#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__)
+#define THREAD_EXT_FIELDS \
+ /* Add threads custom fields here.*/
+#endif
+
+/**
+ * @brief Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note It is invoked from within @p chThdInit() and implicitly from all
+ * the threads creation APIs.
+ */
+#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__)
+#define THREAD_EXT_INIT_HOOK(tp) { \
+ /* Add threads initialization code here.*/ \
+}
+#endif
+
+/**
+ * @brief Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note It is inserted into lock zone.
+ * @note It is also invoked when the threads simply return in order to
+ * terminate.
+ */
+#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__)
+#define THREAD_EXT_EXIT_HOOK(tp) { \
+ /* Add threads finalization code here.*/ \
+}
+#endif
+
+/**
+ * @brief Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__)
+#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \
+ /* System halt code here.*/ \
+}
+#endif
+
+/**
+ * @brief Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__)
+#define IDLE_LOOP_HOOK() { \
+ /* Idle loop code here.*/ \
+}
+#endif
+
+/**
+ * @brief System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ * after processing the virtual timers queue.
+ */
+#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__)
+#define SYSTEM_TICK_EVENT_HOOK() { \
+ /* System tick event code here.*/ \
+}
+#endif
+
+/**
+ * @brief System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ * the system is halted.
+ */
+#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__)
+#define SYSTEM_HALT_HOOK() { \
+ /* System halt code here.*/ \
+}
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h). */
+/*===========================================================================*/
+
+#endif /* _CHCONF_H_ */
+
+/** @} */
diff --git a/demos/ARMCM4-STM32F407-DISCOVERY-MEMS/halconf.h b/demos/ARMCM4-STM32F407-DISCOVERY-MEMS/halconf.h new file mode 100644 index 000000000..6fad6c6b7 --- /dev/null +++ b/demos/ARMCM4-STM32F407-DISCOVERY-MEMS/halconf.h @@ -0,0 +1,342 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
+ 2011,2012 Giovanni Di Sirio.
+
+ This file is part of ChibiOS/RT.
+
+ ChibiOS/RT is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ ChibiOS/RT is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/**
+ * @file templates/halconf.h
+ * @brief HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ * various device drivers from your application. You may also use
+ * this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief Enables the TM subsystem.
+ */
+#if !defined(HAL_USE_TM) || defined(__DOXYGEN__)
+#define HAL_USE_TM FALSE
+#endif
+
+/**
+ * @brief Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL TRUE
+#endif
+
+/**
+ * @brief Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC FALSE
+#endif
+
+/**
+ * @brief Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN FALSE
+#endif
+
+/**
+ * @brief Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT FALSE
+#endif
+
+/**
+ * @brief Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT FALSE
+#endif
+
+/**
+ * @brief Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C FALSE
+#endif
+
+/**
+ * @brief Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU FALSE
+#endif
+
+/**
+ * @brief Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC FALSE
+#endif
+
+/**
+ * @brief Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM TRUE
+#endif
+
+/**
+ * @brief Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC FALSE
+#endif
+
+/**
+ * @brief Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC FALSE
+#endif
+
+/**
+ * @brief Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL TRUE
+#endif
+
+/**
+ * @brief Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB FALSE
+#endif
+
+/**
+ * @brief Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI TRUE
+#endif
+
+/**
+ * @brief Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART FALSE
+#endif
+
+/**
+ * @brief Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Block size for MMC transfers.
+ */
+#if !defined(MMC_SECTOR_SIZE) || defined(__DOXYGEN__)
+#define MMC_SECTOR_SIZE 512
+#endif
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ * This option is recommended also if the SPI driver does not
+ * use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING TRUE
+#endif
+
+/**
+ * @brief Number of positive insertion queries before generating the
+ * insertion event.
+ */
+#if !defined(MMC_POLLING_INTERVAL) || defined(__DOXYGEN__)
+#define MMC_POLLING_INTERVAL 10
+#endif
+
+/**
+ * @brief Interval, in milliseconds, between insertion queries.
+ */
+#if !defined(MMC_POLLING_DELAY) || defined(__DOXYGEN__)
+#define MMC_POLLING_DELAY 10
+#endif
+
+/**
+ * @brief Uses the SPI polled API for small data transfers.
+ * @details Polled transfers usually improve performance because it
+ * saves two context switches and interrupt servicing. Note
+ * that this option has no effect on large transfers which
+ * are always performed using DMAs/IRQs.
+ */
+#if !defined(MMC_USE_SPI_POLLING) || defined(__DOXYGEN__)
+#define MMC_USE_SPI_POLLING TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Number of initialization attempts before rejecting the card.
+ * @note Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY 100
+#endif
+
+/**
+ * @brief Include support for MMC cards.
+ * @note MMC support is not yet implemented so this option must be kept
+ * at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT FALSE
+#endif
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ * default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE 38400
+#endif
+
+/**
+ * @brief Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ * buffers depending on the requirements of your application.
+ * @note The default is 64 bytes for both the transmission and receive
+ * buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE 16
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/demos/ARMCM4-STM32F407-DISCOVERY-MEMS/main.c b/demos/ARMCM4-STM32F407-DISCOVERY-MEMS/main.c new file mode 100644 index 000000000..0d62f1a14 --- /dev/null +++ b/demos/ARMCM4-STM32F407-DISCOVERY-MEMS/main.c @@ -0,0 +1,213 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
+ 2011,2012 Giovanni Di Sirio.
+
+ This file is part of ChibiOS/RT.
+
+ ChibiOS/RT is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ ChibiOS/RT is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "ch.h"
+#include "hal.h"
+#include "test.h"
+#include "lis302dl.h"
+
+/*
+ * PWM configuration structure.
+ * Cyclic callback enabled, channels 1 and 4 enabled without callbacks,
+ * the active state is a logic one.
+ */
+static PWMConfig pwmcfg = {
+ 100000, /* 100kHz PWM clock frequency. */
+ 128, /* PWM period is 128 cycles. */
+ NULL,
+ {
+ {PWM_OUTPUT_ACTIVE_HIGH, NULL},
+ {PWM_OUTPUT_ACTIVE_HIGH, NULL},
+ {PWM_OUTPUT_ACTIVE_HIGH, NULL},
+ {PWM_OUTPUT_ACTIVE_HIGH, NULL}
+ },
+ /* HW dependent part.*/
+ 0
+};
+
+/*
+ * SPI1 configuration structure.
+ * Speed 5.25MHz, CPHA=1, CPOL=1, 8bits frames, MSb transmitted first.
+ * The slave select line is the pin GPIOE_CS_SPI on the port GPIOE.
+ */
+static const SPIConfig spi1cfg = {
+ NULL,
+ /* HW dependent part.*/
+ GPIOE,
+ GPIOE_CS_SPI,
+ SPI_CR1_BR_0 | SPI_CR1_BR_1 | SPI_CR1_CPOL | SPI_CR1_CPHA
+};
+
+/*
+ * SPI2 configuration structure.
+ * Speed 21MHz, CPHA=0, CPOL=0, 8bits frames, MSb transmitted first.
+ * The slave select line is the pin 12 on the port GPIOA.
+ */
+static const SPIConfig spi2cfg = {
+ NULL,
+ /* HW dependent part.*/
+ GPIOB,
+ 12,
+ 0
+};
+
+/* Last accelerometer data.*/
+static int8_t xbuf[4], ybuf[4];
+
+/*
+ * This is a periodic thread that does absolutely nothing except flashing
+ * a LED.
+ */
+static WORKING_AREA(waThread1, 128);
+static msg_t Thread1(void *arg) {
+ systime_t time;
+
+ (void)arg;
+ chRegSetThreadName("reader");
+
+ /* LIS302DL initialization.*/
+ lis302dlWriteRegister(&SPID1, LIS302DL_CTRL_REG1, 0x43);
+ lis302dlWriteRegister(&SPID1, LIS302DL_CTRL_REG2, 0x00);
+ lis302dlWriteRegister(&SPID1, LIS302DL_CTRL_REG3, 0x00);
+
+ /* Reader thread loop.*/
+ time = chTimeNow();
+ while (TRUE) {
+ int32_t x, y;
+ unsigned i;
+
+ /* Reading MEMS accelerometer X and Y registers.*/
+ xbuf[0] = (int8_t)lis302dlReadRegister(&SPID1, LIS302DL_OUTX);
+ ybuf[0] = (int8_t)lis302dlReadRegister(&SPID1, LIS302DL_OUTY);
+
+ /* Keeping an history of the latest four accelerometer readings.*/
+ for (i = 3; i > 0; i--) {
+ xbuf[i] = xbuf[i - 1];
+ ybuf[i] = ybuf[i - 1];
+ }
+
+ /* Transmitting accelerometer the data over SPI2.*/
+ spiSelect(&SPID2);
+ spiSend(&SPID2, 4, xbuf);
+ spiSend(&SPID2, 4, ybuf);
+ spiUnselect(&SPID2);
+
+ /* Calculating average of the latest four accelerometer readings.*/
+ x = ((int32_t)xbuf[0] + (int32_t)xbuf[1] +
+ (int32_t)xbuf[2] + (int32_t)xbuf[3]) / 4;
+ y = ((int32_t)ybuf[0] + (int32_t)ybuf[1] +
+ (int32_t)ybuf[2] + (int32_t)ybuf[3]) / 4;
+
+ /* Reprogramming the four PWM channels using the accelerometer data.*/
+ if (y < 0) {
+ pwmEnableChannel(&PWMD4, 0, (pwmcnt_t)-y);
+ pwmEnableChannel(&PWMD4, 2, (pwmcnt_t)0);
+ }
+ else {
+ pwmEnableChannel(&PWMD4, 2, (pwmcnt_t)y);
+ pwmEnableChannel(&PWMD4, 0, (pwmcnt_t)0);
+ }
+ if (x < 0) {
+ pwmEnableChannel(&PWMD4, 1, (pwmcnt_t)-x);
+ pwmEnableChannel(&PWMD4, 3, (pwmcnt_t)0);
+ }
+ else {
+ pwmEnableChannel(&PWMD4, 3, (pwmcnt_t)x);
+ pwmEnableChannel(&PWMD4, 1, (pwmcnt_t)0);
+ }
+
+ /* Waiting until the next 250 milliseconds time interval.*/
+ chThdSleepUntil(time += MS2ST(100));
+ }
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+ /*
+ * System initializations.
+ * - HAL initialization, this also initializes the configured device drivers
+ * and performs the board-specific initializations.
+ * - Kernel initialization, the main() function becomes a thread and the
+ * RTOS is active.
+ */
+ halInit();
+ chSysInit();
+
+ /*
+ * Activates the serial driver 2 using the driver default configuration.
+ * PA2(TX) and PA3(RX) are routed to USART2.
+ */
+ sdStart(&SD2, NULL);
+ palSetPadMode(GPIOA, 2, PAL_MODE_ALTERNATE(7));
+ palSetPadMode(GPIOA, 3, PAL_MODE_ALTERNATE(7));
+
+ /*
+ * Initializes the SPI driver 1 in order to access the MEMS. The signals
+ * are already initialized in the board file.
+ */
+ spiStart(&SPID1, &spi1cfg);
+
+ /*
+ * Initializes the SPI driver 2. The SPI2 signals are routed as follow:
+ * PB12 - NSS.
+ * PB13 - SCK.
+ * PB14 - MISO.
+ * PB15 - MOSI.
+ */
+ spiStart(&SPID2, &spi2cfg);
+ palSetPad(GPIOB, 12);
+ palSetPadMode(GPIOB, 12, PAL_MODE_OUTPUT_PUSHPULL |
+ PAL_STM32_OSPEED_HIGHEST); /* NSS. */
+ palSetPadMode(GPIOB, 13, PAL_MODE_ALTERNATE(5) |
+ PAL_STM32_OSPEED_HIGHEST); /* SCK. */
+ palSetPadMode(GPIOB, 14, PAL_MODE_ALTERNATE(5)); /* MISO. */
+ palSetPadMode(GPIOB, 15, PAL_MODE_ALTERNATE(5) |
+ PAL_STM32_OSPEED_HIGHEST); /* MOSI. */
+
+ /*
+ * Initializes the PWM driver 4, routes the TIM4 outputs to the board LEDs.
+ */
+ pwmStart(&PWMD4, &pwmcfg);
+ palSetPadMode(GPIOD, GPIOD_LED4, PAL_MODE_ALTERNATE(2)); /* Green. */
+ palSetPadMode(GPIOD, GPIOD_LED3, PAL_MODE_ALTERNATE(2)); /* Orange. */
+ palSetPadMode(GPIOD, GPIOD_LED5, PAL_MODE_ALTERNATE(2)); /* Red. */
+ palSetPadMode(GPIOD, GPIOD_LED6, PAL_MODE_ALTERNATE(2)); /* Blue. */
+
+ /*
+ * Creates the example thread.
+ */
+ chThdCreateStatic(waThread1, sizeof(waThread1),
+ NORMALPRIO + 10, Thread1, NULL);
+
+ /*
+ * Normal main() thread activity, in this demo it does nothing except
+ * sleeping in a loop and check the button state, when the button is
+ * pressed the test procedure is launched with output on the serial
+ * driver 2.
+ */
+ while (TRUE) {
+ if (palReadPad(GPIOA, GPIOA_BUTTON))
+ TestThread(&SD2);
+ chThdSleepMilliseconds(500);
+ }
+}
diff --git a/demos/ARMCM4-STM32F407-DISCOVERY-MEMS/mcuconf.h b/demos/ARMCM4-STM32F407-DISCOVERY-MEMS/mcuconf.h new file mode 100644 index 000000000..42b0b826a --- /dev/null +++ b/demos/ARMCM4-STM32F407-DISCOVERY-MEMS/mcuconf.h @@ -0,0 +1,239 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
+ 2011,2012 Giovanni Di Sirio.
+
+ This file is part of ChibiOS/RT.
+
+ ChibiOS/RT is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ ChibiOS/RT is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * STM32F4xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0 Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3 Lowest...Highest.
+ */
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT FALSE
+#define STM32_HSI_ENABLED TRUE
+#define STM32_LSI_ENABLED TRUE
+#define STM32_HSE_ENABLED TRUE
+#define STM32_LSE_ENABLED FALSE
+#define STM32_CLOCK48_REQUIRED TRUE
+#define STM32_SW STM32_SW_PLL
+#define STM32_PLLSRC STM32_PLLSRC_HSE
+#define STM32_PLLM_VALUE 8
+#define STM32_PLLN_VALUE 336
+#define STM32_PLLP_VALUE 2
+#define STM32_PLLQ_VALUE 7
+#define STM32_HPRE STM32_HPRE_DIV1
+#define STM32_PPRE1 STM32_PPRE1_DIV4
+#define STM32_PPRE2 STM32_PPRE2_DIV2
+#define STM32_RTCSEL STM32_RTCSEL_LSI
+#define STM32_RTCPRE_VALUE 8
+#define STM32_MCO1SEL STM32_MCO1SEL_HSI
+#define STM32_MCO1PRE STM32_MCO1PRE_DIV1
+#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK
+#define STM32_MCO2PRE STM32_MCO2PRE_DIV5
+#define STM32_I2SSRC STM32_I2SSRC_CKIN
+#define STM32_PLLI2SN_VALUE 192
+#define STM32_PLLI2SR_VALUE 5
+#define STM32_VOS STM32_VOS_HIGH
+#define STM32_PVD_ENABLE FALSE
+#define STM32_PLS STM32_PLS_LEV0
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4
+#define STM32_ADC_USE_ADC1 TRUE
+#define STM32_ADC_USE_ADC2 TRUE
+#define STM32_ADC_USE_ADC3 TRUE
+#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4)
+#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
+#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1)
+#define STM32_ADC_ADC1_DMA_PRIORITY 2
+#define STM32_ADC_ADC2_DMA_PRIORITY 2
+#define STM32_ADC_ADC3_DMA_PRIORITY 2
+#define STM32_ADC_IRQ_PRIORITY 5
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5
+#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5
+#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1 TRUE
+#define STM32_CAN_CAN1_IRQ_PRIORITY 11
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY 15
+#define STM32_EXT_EXTI18_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI20_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI21_IRQ_PRIORITY 15
+#define STM32_EXT_EXTI22_IRQ_PRIORITY 15
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1 FALSE
+#define STM32_GPT_USE_TIM2 FALSE
+#define STM32_GPT_USE_TIM3 FALSE
+#define STM32_GPT_USE_TIM4 FALSE
+#define STM32_GPT_USE_TIM5 FALSE
+#define STM32_GPT_USE_TIM8 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY 7
+#define STM32_GPT_TIM2_IRQ_PRIORITY 7
+#define STM32_GPT_TIM3_IRQ_PRIORITY 7
+#define STM32_GPT_TIM4_IRQ_PRIORITY 7
+#define STM32_GPT_TIM5_IRQ_PRIORITY 7
+#define STM32_GPT_TIM8_IRQ_PRIORITY 7
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1 FALSE
+#define STM32_ICU_USE_TIM2 FALSE
+#define STM32_ICU_USE_TIM3 FALSE
+#define STM32_ICU_USE_TIM4 TRUE
+#define STM32_ICU_USE_TIM5 FALSE
+#define STM32_ICU_USE_TIM8 FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY 7
+#define STM32_ICU_TIM2_IRQ_PRIORITY 7
+#define STM32_ICU_TIM3_IRQ_PRIORITY 7
+#define STM32_ICU_TIM4_IRQ_PRIORITY 7
+#define STM32_ICU_TIM5_IRQ_PRIORITY 7
+#define STM32_ICU_TIM8_IRQ_PRIORITY 7
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED FALSE
+#define STM32_PWM_USE_TIM1 FALSE
+#define STM32_PWM_USE_TIM2 FALSE
+#define STM32_PWM_USE_TIM3 FALSE
+#define STM32_PWM_USE_TIM4 TRUE
+#define STM32_PWM_USE_TIM5 FALSE
+#define STM32_PWM_USE_TIM8 FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY 7
+#define STM32_PWM_TIM2_IRQ_PRIORITY 7
+#define STM32_PWM_TIM3_IRQ_PRIORITY 7
+#define STM32_PWM_TIM4_IRQ_PRIORITY 7
+#define STM32_PWM_TIM5_IRQ_PRIORITY 7
+#define STM32_PWM_TIM8_IRQ_PRIORITY 7
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1 FALSE
+#define STM32_SERIAL_USE_USART2 TRUE
+#define STM32_SERIAL_USE_USART3 FALSE
+#define STM32_SERIAL_USE_UART4 FALSE
+#define STM32_SERIAL_USE_UART5 FALSE
+#define STM32_SERIAL_USE_USART6 FALSE
+#define STM32_SERIAL_USART1_PRIORITY 12
+#define STM32_SERIAL_USART2_PRIORITY 12
+#define STM32_SERIAL_USART3_PRIORITY 12
+#define STM32_SERIAL_UART4_PRIORITY 12
+#define STM32_SERIAL_UART5_PRIORITY 12
+#define STM32_SERIAL_USART6_PRIORITY 12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1 TRUE
+#define STM32_SPI_USE_SPI2 TRUE
+#define STM32_SPI_USE_SPI3 FALSE
+#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0)
+#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3)
+#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
+#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
+#define STM32_SPI_SPI1_DMA_PRIORITY 1
+#define STM32_SPI_SPI2_DMA_PRIORITY 1
+#define STM32_SPI_SPI3_DMA_PRIORITY 1
+#define STM32_SPI_SPI1_IRQ_PRIORITY 10
+#define STM32_SPI_SPI2_IRQ_PRIORITY 10
+#define STM32_SPI_SPI3_IRQ_PRIORITY 10
+#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt()
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1 FALSE
+#define STM32_UART_USE_USART2 TRUE
+#define STM32_UART_USE_USART3 FALSE
+#define STM32_UART_USE_USART6 FALSE
+#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
+#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
+#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
+#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
+#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
+#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
+#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
+#define STM32_UART_USART1_IRQ_PRIORITY 12
+#define STM32_UART_USART2_IRQ_PRIORITY 12
+#define STM32_UART_USART3_IRQ_PRIORITY 12
+#define STM32_UART_USART6_IRQ_PRIORITY 12
+#define STM32_UART_USART1_DMA_PRIORITY 0
+#define STM32_UART_USART2_DMA_PRIORITY 0
+#define STM32_UART_USART3_DMA_PRIORITY 0
+#define STM32_UART_USART6_DMA_PRIORITY 0
+#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt()
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1 TRUE
+#define STM32_I2C_USE_I2C2 FALSE
+#define STM32_I2C_USE_I2C3 FALSE
+#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
+#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
+#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2C_I2C1_IRQ_PRIORITY 6
+#define STM32_I2C_I2C2_IRQ_PRIORITY 6
+#define STM32_I2C_I2C3_IRQ_PRIORITY 6
+#define STM32_I2C_I2C1_DMA_PRIORITY 1
+#define STM32_I2C_I2C2_DMA_PRIORITY 1
+#define STM32_I2C_I2C3_DMA_PRIORITY 1
+#define STM32_I2C_I2C1_DMA_ERROR_HOOK() chSysHalt()
+#define STM32_I2C_I2C2_DMA_ERROR_HOOK() chSysHalt()
+#define STM32_I2C_I2C3_DMA_ERROR_HOOK() chSysHalt()
+
diff --git a/demos/ARMCM4-STM32F407-DISCOVERY-MEMS/readme.txt b/demos/ARMCM4-STM32F407-DISCOVERY-MEMS/readme.txt new file mode 100644 index 000000000..0bfb13daf --- /dev/null +++ b/demos/ARMCM4-STM32F407-DISCOVERY-MEMS/readme.txt @@ -0,0 +1,30 @@ +*****************************************************************************
+** ChibiOS/RT port for ARM-Cortex-M4 STM32F407. **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an ST STM32F4-Discovery board.
+
+** The Demo **
+
+The demo shows how to use PWM and SPI drivers using synchronous APIs. The PWM
+driver the four board lets with the data read from the LIS320DL accelerometer.
+The data is also transmitted on the SPI2 port.
+By pressing the button located on the board the test procedure is activated
+with output on the serial port SD2 (USART2).
+
+** Build Procedure **
+
+The demo has been tested by using the free Codesourcery GCC-based toolchain
+and YAGARTO. just modify the TRGT line in the makefile in order to use
+different GCC toolchains.
+
+** Notes **
+
+Some files used by the demo are not part of ChibiOS/RT but are copyright of
+ST Microelectronics and are licensed under a different license.
+Also note that not all the files present in the ST library are distributed
+with ChibiOS/RT, you can find the whole library on the ST web site:
+
+ http://www.st.com
diff --git a/demos/ARMCM4-STM32F407-DISCOVERY/main.c b/demos/ARMCM4-STM32F407-DISCOVERY/main.c index 7dc61425a..5984538a2 100644 --- a/demos/ARMCM4-STM32F407-DISCOVERY/main.c +++ b/demos/ARMCM4-STM32F407-DISCOVERY/main.c @@ -21,8 +21,6 @@ #include "ch.h"
#include "hal.h"
#include "test.h"
-#include "lis302dl.h"
-#include "chprintf.h"
static void pwmpcb(PWMDriver *pwmp);
static void adccb(ADCDriver *adcp, adcsample_t *buffer, size_t n);
@@ -250,31 +248,14 @@ int main(void) { chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
/*
- * Initializes the SPI driver 1 in order to access the MEMS. The signals
- * are initialized in the board file.
- * Several LIS302DL registers are then initialized.
- */
- spiStart(&SPID1, &spi1cfg);
- lis302dlWriteRegister(&SPID1, LIS302DL_CTRL_REG1, 0x43);
- lis302dlWriteRegister(&SPID1, LIS302DL_CTRL_REG2, 0x00);
- lis302dlWriteRegister(&SPID1, LIS302DL_CTRL_REG3, 0x00);
-
- /*
* Normal main() thread activity, in this demo it does nothing except
* sleeping in a loop and check the button state, when the button is
* pressed the test procedure is launched with output on the serial
* driver 2.
*/
while (TRUE) {
- int8_t x, y, z;
-
if (palReadPad(GPIOA, GPIOA_BUTTON))
TestThread(&SD2);
-
- x = (int8_t)lis302dlReadRegister(&SPID1, LIS302DL_OUTX);
- y = (int8_t)lis302dlReadRegister(&SPID1, LIS302DL_OUTY);
- z = (int8_t)lis302dlReadRegister(&SPID1, LIS302DL_OUTZ);
- chprintf((BaseSequentialStream *)&SD2, "%d, %d, %d\r\n", x, y, z);
chThdSleepMilliseconds(500);
}
}
diff --git a/demos/ARMCM4-STM32F407-DISCOVERY/mcuconf.h b/demos/ARMCM4-STM32F407-DISCOVERY/mcuconf.h index 42b0b826a..59daac603 100644 --- a/demos/ARMCM4-STM32F407-DISCOVERY/mcuconf.h +++ b/demos/ARMCM4-STM32F407-DISCOVERY/mcuconf.h @@ -173,7 +173,7 @@ /*
* SPI driver system settings.
*/
-#define STM32_SPI_USE_SPI1 TRUE
+#define STM32_SPI_USE_SPI1 FALSE
#define STM32_SPI_USE_SPI2 TRUE
#define STM32_SPI_USE_SPI3 FALSE
#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0)
diff --git a/readme.txt b/readme.txt index 6e092b28b..8919d793c 100644 --- a/readme.txt +++ b/readme.txt @@ -162,6 +162,9 @@ 3484947)(backported to 2.4.1).
- FIX: Fixed various minor documentation errors (bug 3484942)(backported
to 2.4.1).
+- NEW: Added another STM32F4-Discovery demo using the on-board MEMS, SPI
+ and PWM. Removed MEMS handling from the old demo because code size limits
+ on non-free compilers.
- NEW: Added configuration wizard plugin under ./tools/eclipse/plugins. This
first version is able to configure the board files for STM32F0xx, STM32F4xx
and STM32L1xx.
|