git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@5219 35acf78f-673a-0410-8e92-d51de3d6d3f4

1 files changed, 0 insertions, 321 deletions

diff --git a/tools/eclipse/config_wizard/resources/gencfg/processors/boards/stm32l1xx/templates/board.h.ftl b/tools/eclipse/config_wizard/resources/gencfg/processors/boards/stm32l1xx/templates/board.h.ftl
deleted file mode 100644
index 76db7eb27..000000000
--- a/tools/eclipse/config_wizard/resources/gencfg/processors/boards/stm32l1xx/templates/board.h.ftl
+++ /dev/null
@@ -1,321 +0,0 @@
-[#ftl]

-[#--

-    ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,

-                 2011,2012 Giovanni Di Sirio.

-

-    This file is part of ChibiOS/RT.

-

-    ChibiOS/RT is free software; you can redistribute it and/or modify

-    it under the terms of the GNU General Public License as published by

-    the Free Software Foundation; either version 3 of the License, or

-    (at your option) any later version.

-

-    ChibiOS/RT is distributed in the hope that it will be useful,

-    but WITHOUT ANY WARRANTY; without even the implied warranty of

-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

-    GNU General Public License for more details.

-

-    You should have received a copy of the GNU General Public License

-    along with this program.  If not, see <http://www.gnu.org/licenses/>.

-  --]

-[@pp.dropOutputFile /]

-[#import "/@lib/libutils.ftl" as utils /]

-[#import "/@lib/liblicense.ftl" as license /]

-[@pp.changeOutputFile name="board.h" /]

-/*

-[@license.EmitLicenseAsText /]

-*/

-

-#ifndef _BOARD_H_

-#define _BOARD_H_

-

-/*

- * Setup for ${doc1.board.board_name[0]} board.

- */

-

-/*

- * Board identifier.

- */

-#define BOARD_${doc1.board.board_id[0]}

-#define BOARD_NAME                  "${doc1.board.board_name[0]}"

-

-[#if doc1.board.ethernet_phy[0]??]

-/*

- * Ethernet PHY type.

- */

-#define BOARD_PHY_ID                ${doc1.board.ethernet_phy.identifier[0]}

-[#if doc1.board.ethernet_phy.bus_type[0]?string == "RMII"]

-#define BOARD_PHY_RMII

-[/#if]

-[/#if]

-

-/*

- * Board oscillators-related settings.

-[#if doc1.board.clocks.@LSEFrequency[0]?number == 0]

- * NOTE: LSE not fitted.

-[/#if]

-[#if doc1.board.clocks.@HSEFrequency[0]?number == 0]

- * NOTE: HSE not fitted.

-[/#if]

- */

-#if !defined(STM32_LSECLK)

-#define STM32_LSECLK                ${doc1.board.clocks.@LSEFrequency[0]}

-#endif

-

-#if !defined(STM32_HSECLK)

-#define STM32_HSECLK                ${doc1.board.clocks.@HSEFrequency[0]}

-#endif

-

-[#if doc1.board.clocks.@HSEBypass[0]?string == "true"]

-#define STM32_HSE_BYPASS

-[/#if]

-

-/*

- * MCU type as defined in the ST header file stm32l1xx.h.

- */

-#define STM32L1XX_MD

-

-/*

- * IO pins assignments.

- */

-[#list doc1.board.ports.* as port]

-  [#assign port_name = port?node_name?upper_case /]

-  [#list port.* as pin]

-    [#assign pin_name = pin?node_name?upper_case /]

-    [#assign name = pin.@ID[0]?string?trim /]

-    [#if name?length == 0]

-      [#assign name = pin_name /]

-    [/#if]

-#define ${(port_name + "_" + name)?right_pad(27, " ")} ${pin_index?string}

-  [/#list]

-

-[/#list]

-/*

- * I/O ports initial setup, this configuration is established soon after reset

- * in the initialization code.

- * Please refer to the STM32 Reference Manual for details.

- */

-#define PIN_MODE_INPUT(n)           (0U << ((n) * 2))

-#define PIN_MODE_OUTPUT(n)          (1U << ((n) * 2))

-#define PIN_MODE_ALTERNATE(n)       (2U << ((n) * 2))

-#define PIN_MODE_ANALOG(n)          (3U << ((n) * 2))

-#define PIN_ODR_LOW(n)              (0U << (n))

-#define PIN_ODR_HIGH(n)             (1U << (n))

-#define PIN_OTYPE_PUSHPULL(n)       (0U << (n))

-#define PIN_OTYPE_OPENDRAIN(n)      (1U << (n))

-#define PIN_OSPEED_400K(n)          (0U << ((n) * 2))

-#define PIN_OSPEED_2M(n)            (1U << ((n) * 2))

-#define PIN_OSPEED_10M(n)           (2U << ((n) * 2))

-#define PIN_OSPEED_40M(n)           (3U << ((n) * 2))

-#define PIN_PUPDR_FLOATING(n)       (0U << ((n) * 2))

-#define PIN_PUPDR_PULLUP(n)         (1U << ((n) * 2))

-#define PIN_PUPDR_PULLDOWN(n)       (2U << ((n) * 2))

-#define PIN_AFIO_AF(n, v)           ((v##U) << ((n % 8) * 4))

-

-[#list doc1.board.ports.* as port]

-  [#assign port_name = port?node_name?upper_case /]

-/*

- * ${port_name} setup:

- *

-  [#-- Generating pin descriptions inside the comment.--]

-  [#list port.* as pin]

-    [#assign pin_name = pin?node_name?upper_case /]

-    [#assign name = pin.@ID[0]?string?trim /]

-    [#if name?length == 0]

-      [#assign name = pin_name /]

-    [/#if]

-    [#assign mode = pin.@Mode[0] /]

-    [#assign type = pin.@Type[0] /]

-    [#assign resistor = pin.@Resistor[0] /]

-    [#assign speed = pin.@Speed[0] /]

-    [#assign alternate = pin.@Alternate[0] /]

-    [#if mode == "Input"]

-      [#assign desc = mode + " " + resistor /]

-    [#elseif mode == "Output"]

-      [#assign desc = mode + " " + type + " " + speed /]

-    [#elseif mode == "Alternate"]

-      [#assign desc = mode + " " + alternate /]

-    [#else]

-      [#assign desc = "Analog" /]

-    [/#if]

- * P${(port?node_name[4..] + pin_index?string)?right_pad(3, " ")} - ${name?right_pad(26, " ")}(${desc?lower_case}).

-  [/#list]

- */

-  [#--

-    -- Generating MODER register value.

-    --]

-  [#list port.* as pin]

-    [#assign pin_name = pin?node_name?upper_case /]

-    [#assign name = pin.@ID[0]?string?trim /]

-    [#if name?length == 0]

-      [#assign name = pin_name /]

-    [/#if]

-    [#assign mode = pin.@Mode[0] /]

-    [#if mode == "Input"]

-      [#assign out = "PIN_MODE_INPUT(" + port_name + "_" + name + ")" /]

-    [#elseif mode == "Output"]

-      [#assign out = "PIN_MODE_OUTPUT(" + port_name + "_" + name + ")" /]

-    [#elseif mode == "Alternate"]

-      [#assign out = "PIN_MODE_ALTERNATE(" + port_name + "_" + name + ")" /]

-    [#else]

-      [#assign out = "PIN_MODE_ANALOG(" + port_name + "_" + name + ")" /]

-    [/#if]

-    [#if pin_index == 0]

-      [#assign line = "#define VAL_" + port_name + "_MODER             (" + out /]

-    [#else]

-      [#assign line = "                                     " + out /]

-    [/#if]

-    [#if pin_index < 15]

-${(line + " |")?right_pad(76, " ") + "\\"}

-    [#else]

-${line + ")"}

-    [/#if]

-  [/#list]

-  [#--

-    -- Generating OTYPER register value.

-    --]

-  [#list port.* as pin]

-    [#assign pin_name = pin?node_name?upper_case /]

-    [#assign name = pin.@ID[0]?string?trim /]

-    [#if name?length == 0]

-      [#assign name = pin_name /]

-    [/#if]

-    [#assign type = pin.@Type[0] /]

-    [#if type == "PushPull"]

-      [#assign out = "PIN_OTYPE_PUSHPULL(" + port_name + "_" + name + ")" /]

-    [#else]

-      [#assign out = "PIN_OTYPE_OPENDRAIN(" + port_name + "_" + name + ")" /]

-    [/#if]

-    [#if pin_index == 0]

-      [#assign line = "#define VAL_" + port_name + "_OTYPER            (" + out /]

-    [#else]

-      [#assign line = "                                     " + out /]

-    [/#if]

-    [#if pin_index < 15]

-${(line + " |")?right_pad(76, " ") + "\\"}

-    [#else]

-${line + ")"}

-    [/#if]

-  [/#list]

-  [#--

-    -- Generating SPEEDR register value.

-    --]

-  [#list port.* as pin]

-    [#assign pin_name = pin?node_name?upper_case /]

-    [#assign name = pin.@ID[0]?string?trim /]

-    [#if name?length == 0]

-      [#assign name = pin_name /]

-    [/#if]

-    [#assign speed = pin.@Speed[0] /]

-    [#if speed == "Minimum"]

-      [#assign out = "PIN_OSPEED_400K(" + port_name + "_" + name + ")" /]

-    [#elseif speed == "Low"]

-      [#assign out = "PIN_OSPEED_2M(" + port_name + "_" + name + ")" /]

-    [#elseif speed == "High"]

-      [#assign out = "PIN_OSPEED_10M(" + port_name + "_" + name + ")" /]

-    [#else]

-      [#assign out = "PIN_OSPEED_40M(" + port_name + "_" + name + ")" /]

-    [/#if]

-    [#if pin_index == 0]

-      [#assign line = "#define VAL_" + port_name + "_OSPEEDR           (" + out /]

-    [#else]

-      [#assign line = "                                     " + out /]

-    [/#if]

-    [#if pin_index < 15]

-${(line + " |")?right_pad(76, " ") + "\\"}

-    [#else]

-${line + ")"}

-    [/#if]

-  [/#list]

-  [#--

-    -- Generating PUPDR register value.

-    --]

-  [#list port.* as pin]

-    [#assign pin_name = pin?node_name?upper_case /]

-    [#assign name = pin.@ID[0]?string?trim /]

-    [#if name?length == 0]

-      [#assign name = pin_name /]

-    [/#if]

-    [#assign resistor = pin.@Resistor[0] /]

-    [#if resistor == "Floating"]

-      [#assign out = "PIN_PUPDR_FLOATING(" + port_name + "_" + name + ")" /]

-    [#elseif resistor == "PullUp"]

-      [#assign out = "PIN_PUPDR_PULLUP(" + port_name + "_" + name + ")" /]

-    [#else]

-      [#assign out = "PIN_PUPDR_PULLDOWN(" + port_name + "_" + name + ")" /]

-    [/#if]

-    [#if pin_index == 0]

-      [#assign line = "#define VAL_" + port_name + "_PUPDR             (" + out /]

-    [#else]

-      [#assign line = "                                     " + out /]

-    [/#if]

-    [#if pin_index < 15]

-${(line + " |")?right_pad(76, " ") + "\\"}

-    [#else]

-${line + ")"}

-    [/#if]

-  [/#list]

-  [#--

-    -- Generating ODR register value.

-    --]

-  [#list port.* as pin]

-    [#assign pin_name = pin?node_name?upper_case /]

-    [#assign name = pin.@ID[0]?string?trim /]

-    [#if name?length == 0]

-      [#assign name = pin_name /]

-    [/#if]

-    [#assign level = pin.@Level[0] /]

-    [#if level == "Low"]

-      [#assign out = "PIN_ODR_LOW(" + port_name + "_" + name + ")" /]

-    [#else]

-      [#assign out = "PIN_ODR_HIGH(" + port_name + "_" + name + ")" /]

-    [/#if]

-    [#if pin_index == 0]

-      [#assign line = "#define VAL_" + port_name + "_ODR               (" + out /]

-    [#else]

-      [#assign line = "                                     " + out /]

-    [/#if]

-    [#if pin_index < 15]

-${(line + " |")?right_pad(76, " ") + "\\"}

-    [#else]

-${line + ")"}

-    [/#if]

-  [/#list]

-  [#--

-    -- Generating AFRx registers values.

-    --]

-  [#list port.* as pin]

-    [#assign pin_name = pin?node_name?upper_case /]

-    [#assign name = pin.@ID[0]?string?trim /]

-    [#if name?length == 0]

-      [#assign name = pin_name /]

-    [/#if]

-    [#assign alternate = pin.@Alternate[0]?trim /]

-    [#assign out = "PIN_AFIO_AF(" + port_name + "_" + name + ", " + alternate + ")" /]

-    [#if pin_index == 0]

-      [#assign line = "#define VAL_" + port_name + "_AFRL              (" + out /]

-    [#elseif pin_index == 8]

-      [#assign line = "#define VAL_" + port_name + "_AFRH              (" + out /]

-    [#else]

-      [#assign line = "                                     " + out /]

-    [/#if]

-    [#if (pin_index == 7) || (pin_index == 15)]

-${line + ")"}

-    [#else]

-${(line + " |")?right_pad(76, " ") + "\\"}

-    [/#if]

-  [/#list]

-

-[/#list]

-

-#if !defined(_FROM_ASM_)

-#ifdef __cplusplus

-extern "C" {

-#endif

-  void boardInit(void);

-#ifdef __cplusplus

-}

-#endif

-#endif /* _FROM_ASM_ */

-

-#endif /* _BOARD_H_ */