aboutsummaryrefslogtreecommitdiffstats
path: root/testhal
diff options
context:
space:
mode:
authorGiovanni Di Sirio <gdisirio@gmail.com>2018-12-29 12:38:12 +0000
committerGiovanni Di Sirio <gdisirio@gmail.com>2018-12-29 12:38:12 +0000
commite3aa427548a678db8b359e24aade7227792b43ad (patch)
tree983736bae395ac0c4654972c39c270e1bee508df /testhal
parentef8caca39a1963d75376b4ae004b0426cc801792 (diff)
downloadChibiOS-e3aa427548a678db8b359e24aade7227792b43ad.tar.gz
ChibiOS-e3aa427548a678db8b359e24aade7227792b43ad.tar.bz2
ChibiOS-e3aa427548a678db8b359e24aade7227792b43ad.zip
DAC rework for new DMA API , DAC support for STM32H7xx.
git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@12490 110e8d01-0319-4d1e-a829-52ad28d1bb01
Diffstat (limited to 'testhal')
-rw-r--r--testhal/STM32/multi/DAC/Makefile6
-rw-r--r--testhal/STM32/multi/DAC/cfg/stm32h743_nucleo144/chconf.h714
-rw-r--r--testhal/STM32/multi/DAC/cfg/stm32h743_nucleo144/halconf.h532
-rw-r--r--testhal/STM32/multi/DAC/cfg/stm32h743_nucleo144/mcuconf.h462
-rw-r--r--testhal/STM32/multi/DAC/cfg/stm32h743_nucleo144/portab.c60
-rw-r--r--testhal/STM32/multi/DAC/cfg/stm32h743_nucleo144/portab.h77
-rw-r--r--testhal/STM32/multi/DAC/debug/STM32-DAC (Select ELF file)(OpenOCD, Flash and Run).launch2
-rw-r--r--testhal/STM32/multi/DAC/make/stm32h743_nucleo144.make226
-rw-r--r--testhal/STM32/multi/DAC/make/stm32l476_discovery.make8
-rw-r--r--testhal/STM32/multi/DAC/make/stm32l4r5zi_nucleo144.make8
10 files changed, 2086 insertions, 9 deletions
diff --git a/testhal/STM32/multi/DAC/Makefile b/testhal/STM32/multi/DAC/Makefile
index 6266997ef..a5368aa98 100644
--- a/testhal/STM32/multi/DAC/Makefile
+++ b/testhal/STM32/multi/DAC/Makefile
@@ -4,6 +4,10 @@
all:
@echo
+ @echo === Building for STM32H743-Nucleo144 ===============================
+ @make --no-print-directory -f ./make/stm32h743_nucleo144.make all
+ @echo ====================================================================
+ @echo
@echo === Building for STM32L476-Discovery ===============================
+@make --no-print-directory -f ./make/stm32l476_discovery.make all
@echo ====================================================================
@@ -15,6 +19,8 @@ all:
clean:
@echo
+ -@make --no-print-directory -f ./make/stm32h743_nucleo144.make clean
+ @echo
+@make --no-print-directory -f ./make/stm32l476_discovery.make clean
@echo
+@make --no-print-directory -f ./make/stm32l4r5zi_nucleo144.make clean
diff --git a/testhal/STM32/multi/DAC/cfg/stm32h743_nucleo144/chconf.h b/testhal/STM32/multi/DAC/cfg/stm32h743_nucleo144/chconf.h
new file mode 100644
index 000000000..a52e9a5ed
--- /dev/null
+++ b/testhal/STM32/multi/DAC/cfg/stm32h743_nucleo144/chconf.h
@@ -0,0 +1,714 @@
+/*
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/chconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+#define _CHIBIOS_RT_CONF_VER_6_0_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System time counter resolution.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_ST_RESOLUTION)
+#define CH_CFG_ST_RESOLUTION 32
+#endif
+
+/**
+ * @brief System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ * setting also defines the system tick time unit.
+ */
+#if !defined(CH_CFG_ST_FREQUENCY)
+#define CH_CFG_ST_FREQUENCY 10000
+#endif
+
+/**
+ * @brief Time intervals data size.
+ * @note Allowed values are 16, 32 or 64 bits.
+ */
+#if !defined(CH_CFG_INTERVALS_SIZE)
+#define CH_CFG_INTERVALS_SIZE 32
+#endif
+
+/**
+ * @brief Time types data size.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_TIME_TYPES_SIZE)
+#define CH_CFG_TIME_TYPES_SIZE 32
+#endif
+
+/**
+ * @brief Time delta constant for the tick-less mode.
+ * @note If this value is zero then the system uses the classic
+ * periodic tick. This value represents the minimum number
+ * of ticks that is safe to specify in a timeout directive.
+ * The value one is not valid, timeouts are rounded up to
+ * this value.
+ */
+#if !defined(CH_CFG_ST_TIMEDELTA)
+#define CH_CFG_ST_TIMEDELTA 2
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ * threads before preemption occurs. Setting this value to zero
+ * disables the preemption for threads with equal priority and the
+ * round robin becomes cooperative. Note that higher priority
+ * threads can still preempt, the kernel is always preemptive.
+ * @note Disabling the round robin preemption makes the kernel more compact
+ * and generally faster.
+ * @note The round robin preemption is not supported in tickless mode and
+ * must be set to zero in that case.
+ */
+#if !defined(CH_CFG_TIME_QUANTUM)
+#define CH_CFG_TIME_QUANTUM 0
+#endif
+
+/**
+ * @brief Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ * then the whole available RAM is used. The core memory is made
+ * available to the heap allocator and/or can be used directly through
+ * the simplified core memory allocator.
+ *
+ * @note In order to let the OS manage the whole RAM the linker script must
+ * provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note Requires @p CH_CFG_USE_MEMCORE.
+ */
+#if !defined(CH_CFG_MEMCORE_SIZE)
+#define CH_CFG_MEMCORE_SIZE 0
+#endif
+
+/**
+ * @brief Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ * does not spawn the idle thread. The application @p main()
+ * function becomes the idle thread and must implement an
+ * infinite loop.
+ */
+#if !defined(CH_CFG_NO_IDLE_THREAD)
+#define CH_CFG_NO_IDLE_THREAD FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ * is used when two possible implementations exist.
+ *
+ * @note This is not related to the compiler optimization options.
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_OPTIMIZE_SPEED)
+#define CH_CFG_OPTIMIZE_SPEED TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_TM)
+#define CH_CFG_USE_TM FALSE
+#endif
+
+/**
+ * @brief Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_REGISTRY)
+#define CH_CFG_USE_REGISTRY TRUE
+#endif
+
+/**
+ * @brief Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_WAITEXIT)
+#define CH_CFG_USE_WAITEXIT TRUE
+#endif
+
+/**
+ * @brief Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_SEMAPHORES)
+#define CH_CFG_USE_SEMAPHORES TRUE
+#endif
+
+/**
+ * @brief Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ * priority rather than in FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
+#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+#endif
+
+/**
+ * @brief Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MUTEXES)
+#define CH_CFG_USE_MUTEXES TRUE
+#endif
+
+/**
+ * @brief Enables recursive behavior on mutexes.
+ * @note Recursive mutexes are heavier and have an increased
+ * memory footprint.
+ *
+ * @note The default is @p FALSE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
+#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+#endif
+
+/**
+ * @brief Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#if !defined(CH_CFG_USE_CONDVARS)
+#define CH_CFG_USE_CONDVARS TRUE
+#endif
+
+/**
+ * @brief Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ * specification are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_CONDVARS.
+ */
+#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
+#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
+#endif
+
+/**
+ * @brief Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_EVENTS)
+#define CH_CFG_USE_EVENTS TRUE
+#endif
+
+/**
+ * @brief Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ * are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_EVENTS.
+ */
+#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
+#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+#endif
+
+/**
+ * @brief Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MESSAGES)
+#define CH_CFG_USE_MESSAGES TRUE
+#endif
+
+/**
+ * @brief Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ * FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_MESSAGES.
+ */
+#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
+#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
+#endif
+
+/**
+ * @brief Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ * included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#if !defined(CH_CFG_USE_MAILBOXES)
+#define CH_CFG_USE_MAILBOXES TRUE
+#endif
+
+/**
+ * @brief Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MEMCORE)
+#define CH_CFG_USE_MEMCORE TRUE
+#endif
+
+/**
+ * @brief Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ * @p CH_CFG_USE_SEMAPHORES.
+ * @note Mutexes are recommended.
+ */
+#if !defined(CH_CFG_USE_HEAP)
+#define CH_CFG_USE_HEAP TRUE
+#endif
+
+/**
+ * @brief Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MEMPOOLS)
+#define CH_CFG_USE_MEMPOOLS TRUE
+#endif
+
+/**
+ * @brief Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_OBJ_FIFOS)
+#define CH_CFG_USE_OBJ_FIFOS TRUE
+#endif
+
+/**
+ * @brief Pipes APIs.
+ * @details If enabled then the pipes APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_PIPES)
+#define CH_CFG_USE_PIPES TRUE
+#endif
+
+/**
+ * @brief Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_WAITEXIT.
+ * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#if !defined(CH_CFG_USE_DYNAMIC)
+#define CH_CFG_USE_DYNAMIC TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ * kernel.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_CFG_USE_FACTORY)
+#define CH_CFG_USE_FACTORY TRUE
+#endif
+
+/**
+ * @brief Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ * pointer but this could have unintended side effects.
+ */
+#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
+#endif
+
+/**
+ * @brief Enables the registry of generic objects.
+ */
+#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
+#endif
+
+/**
+ * @brief Enables factory for generic buffers.
+ */
+#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
+#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
+#endif
+
+/**
+ * @brief Enables factory for semaphores.
+ */
+#if !defined(CH_CFG_FACTORY_SEMAPHORES)
+#define CH_CFG_FACTORY_SEMAPHORES TRUE
+#endif
+
+/**
+ * @brief Enables factory for mailboxes.
+ */
+#if !defined(CH_CFG_FACTORY_MAILBOXES)
+#define CH_CFG_FACTORY_MAILBOXES TRUE
+#endif
+
+/**
+ * @brief Enables factory for objects FIFOs.
+ */
+#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
+#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
+#endif
+
+/**
+ * @brief Enables factory for Pipes.
+ */
+#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__)
+#define CH_CFG_FACTORY_PIPES TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Debug option, kernel statistics.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_STATISTICS)
+#define CH_DBG_STATISTICS FALSE
+#endif
+
+/**
+ * @brief Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ * at runtime.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
+#define CH_DBG_SYSTEM_STATE_CHECK TRUE
+#endif
+
+/**
+ * @brief Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ * parameters are activated.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_ENABLE_CHECKS)
+#define CH_DBG_ENABLE_CHECKS TRUE
+#endif
+
+/**
+ * @brief Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ * activated. This includes consistency checks inside the kernel,
+ * runtime anomalies and port-defined checks.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_ENABLE_ASSERTS)
+#define CH_DBG_ENABLE_ASSERTS TRUE
+#endif
+
+/**
+ * @brief Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_MASK)
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL
+#endif
+
+/**
+ * @brief Trace buffer entries.
+ * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ * different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
+#define CH_DBG_TRACE_BUFFER_SIZE 128
+#endif
+
+/**
+ * @brief Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note The default is @p FALSE.
+ * @note The stack check is performed in a architecture/port dependent way.
+ * It may not be implemented or some ports.
+ * @note The default failure mode is to halt the system with the global
+ * @p panic_msg variable set to @p NULL.
+ */
+#if !defined(CH_DBG_ENABLE_STACK_CHECK)
+#define CH_DBG_ENABLE_STACK_CHECK TRUE
+#endif
+
+/**
+ * @brief Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ * value when a thread is created. This can be useful for the
+ * runtime measurement of the used stack.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_FILL_THREADS)
+#define CH_DBG_FILL_THREADS TRUE
+#endif
+
+/**
+ * @brief Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ * counts the system ticks occurred while executing the thread.
+ *
+ * @note The default is @p FALSE.
+ * @note This debug option is not currently compatible with the
+ * tickless mode.
+ */
+#if !defined(CH_DBG_THREADS_PROFILING)
+#define CH_DBG_THREADS_PROFILING FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ * just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK() { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
+ * @brief Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief Threads initialization hook.
+ * @details User initialization code added to the @p _thread_init() function.
+ *
+ * @note It is invoked from within @p _thread_init() and implicitly from all
+ * the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
+ * @brief Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
+ /* Add threads finalization code here.*/ \
+}
+
+/**
+ * @brief Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
+ /* Context switch code here.*/ \
+}
+
+/**
+ * @brief ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
+ /* IRQ prologue code here.*/ \
+}
+
+/**
+ * @brief ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
+ /* IRQ epilogue code here.*/ \
+}
+
+/**
+ * @brief Idle thread enter hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() { \
+ /* Idle-enter code here.*/ \
+}
+
+/**
+ * @brief Idle thread leave hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() { \
+ /* Idle-leave code here.*/ \
+}
+
+/**
+ * @brief Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() { \
+ /* Idle loop code here.*/ \
+}
+
+/**
+ * @brief System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ * after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() { \
+ /* System tick event code here.*/ \
+}
+
+/**
+ * @brief System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ * the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
+ /* System halt code here.*/ \
+}
+
+/**
+ * @brief Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ * trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) { \
+ /* Trace code here.*/ \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h). */
+/*===========================================================================*/
+
+#endif /* CHCONF_H */
+
+/** @} */
diff --git a/testhal/STM32/multi/DAC/cfg/stm32h743_nucleo144/halconf.h b/testhal/STM32/multi/DAC/cfg/stm32h743_nucleo144/halconf.h
new file mode 100644
index 000000000..6545cc1ec
--- /dev/null
+++ b/testhal/STM32/multi/DAC/cfg/stm32h743_nucleo144/halconf.h
@@ -0,0 +1,532 @@
+/*
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/halconf.h
+ * @brief HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ * various device drivers from your application. You may also use
+ * this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef HALCONF_H
+#define HALCONF_H
+
+#define _CHIBIOS_HAL_CONF_
+#define _CHIBIOS_HAL_CONF_VER_6_0_
+
+#include "mcuconf.h"
+
+/**
+ * @brief Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL TRUE
+#endif
+
+/**
+ * @brief Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC FALSE
+#endif
+
+/**
+ * @brief Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN FALSE
+#endif
+
+/**
+ * @brief Enables the cryptographic subsystem.
+ */
+#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__)
+#define HAL_USE_CRY FALSE
+#endif
+
+/**
+ * @brief Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC TRUE
+#endif
+
+/**
+ * @brief Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT FALSE
+#endif
+
+/**
+ * @brief Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT TRUE
+#endif
+
+/**
+ * @brief Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C FALSE
+#endif
+
+/**
+ * @brief Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S FALSE
+#endif
+
+/**
+ * @brief Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU FALSE
+#endif
+
+/**
+ * @brief Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC FALSE
+#endif
+
+/**
+ * @brief Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM FALSE
+#endif
+
+/**
+ * @brief Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC FALSE
+#endif
+
+/**
+ * @brief Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC FALSE
+#endif
+
+/**
+ * @brief Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL FALSE
+#endif
+
+/**
+ * @brief Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB FALSE
+#endif
+
+/**
+ * @brief Enables the SIO subsystem.
+ */
+#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__)
+#define HAL_USE_SIO FALSE
+#endif
+
+/**
+ * @brief Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the TRNG subsystem.
+ */
+#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__)
+#define HAL_USE_TRNG FALSE
+#endif
+
+/**
+ * @brief Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART FALSE
+#endif
+
+/**
+ * @brief Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB FALSE
+#endif
+
+/**
+ * @brief Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG FALSE
+#endif
+
+/**
+ * @brief Enables the WSPI subsystem.
+ */
+#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__)
+#define HAL_USE_WSPI FALSE
+#endif
+
+/*===========================================================================*/
+/* PAL driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__)
+#define PAL_USE_CALLBACKS FALSE
+#endif
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__)
+#define PAL_USE_WAIT FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE TRUE
+#endif
+
+/**
+ * @brief Enforces the driver to use direct callbacks rather than OSAL events.
+ */
+#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__)
+#define CAN_ENFORCE_USE_CALLBACKS FALSE
+#endif
+
+/*===========================================================================*/
+/* CRY driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables the SW fall-back of the cryptographic driver.
+ * @details When enabled, this option, activates a fall-back software
+ * implementation for algorithms not supported by the underlying
+ * hardware.
+ * @note Fall-back implementations may not be present for all algorithms.
+ */
+#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__)
+#define HAL_CRY_USE_FALLBACK FALSE
+#endif
+
+/**
+ * @brief Makes the driver forcibly use the fall-back implementations.
+ */
+#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__)
+#define HAL_CRY_ENFORCE_FALLBACK FALSE
+#endif
+
+/*===========================================================================*/
+/* DAC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__)
+#define DAC_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define DAC_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables the zero-copy API.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY FALSE
+#endif
+
+/**
+ * @brief Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ * This option is recommended also if the SPI driver does not
+ * use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Number of initialization attempts before rejecting the card.
+ * @note Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY 100
+#endif
+
+/**
+ * @brief Include support for MMC cards.
+ * @note MMC support is not yet implemented so this option must be kept
+ * at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT FALSE
+#endif
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING TRUE
+#endif
+
+/**
+ * @brief OCR initialization constant for V20 cards.
+ */
+#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__)
+#define SDC_INIT_OCR_V20 0x50FF8000U
+#endif
+
+/**
+ * @brief OCR initialization constant for non-V20 cards.
+ */
+#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__)
+#define SDC_INIT_OCR 0x80100000U
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ * default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE 38400
+#endif
+
+/**
+ * @brief Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ * buffers depending on the requirements of your application.
+ * @note The default is 16 bytes for both the transmission and receive
+ * buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE 16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting. */
+/*===========================================================================*/
+
+/**
+ * @brief Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ * the USB data endpoint maximum packet size.
+ * @note The default is 256 bytes for both the transmission and receive
+ * buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE 256
+#endif
+
+/**
+ * @brief Serial over USB number of buffers.
+ * @note The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER 2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables circular transfers APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__)
+#define SPI_USE_CIRCULAR FALSE
+#endif
+
+
+/**
+ * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/**
+ * @brief Handling method for SPI CS line.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__)
+#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT FALSE
+#endif
+
+/**
+ * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT FALSE
+#endif
+
+/*===========================================================================*/
+/* WSPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__)
+#define WSPI_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define WSPI_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+#endif /* HALCONF_H */
+
+/** @} */
diff --git a/testhal/STM32/multi/DAC/cfg/stm32h743_nucleo144/mcuconf.h b/testhal/STM32/multi/DAC/cfg/stm32h743_nucleo144/mcuconf.h
new file mode 100644
index 000000000..69f4e7c09
--- /dev/null
+++ b/testhal/STM32/multi/DAC/cfg/stm32h743_nucleo144/mcuconf.h
@@ -0,0 +1,462 @@
+/*
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#ifndef MCUCONF_H
+#define MCUCONF_H
+
+/*
+ * STM32H7xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0 Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3 Lowest...Highest.
+ */
+
+#define STM32H7xx_MCUCONF
+#define STM32H743_MCUCONF
+
+/*
+ * General settings.
+ */
+#define STM32_NO_INIT FALSE
+#define STM32_SYS_CK_ENFORCED_VALUE STM32_HSICLK
+
+/*
+ * Memory attributes settings.
+ */
+#define STM32_NOCACHE_SRAM1_SRAM2 FALSE
+#define STM32_NOCACHE_SRAM3 TRUE
+
+/*
+ * PWR system settings.
+ * Reading STM32 Reference Manual is required.
+ * Register constants are taken from the ST header.
+ */
+#define STM32_VOS STM32_VOS_SCALE1
+#define STM32_PWR_CR1 (PWR_CR1_SVOS_1 | PWR_CR1_SVOS_0)
+#define STM32_PWR_CR2 (PWR_CR2_BREN)
+#define STM32_PWR_CR3 (PWR_CR3_LDOEN | PWR_CR3_USB33DEN)
+#define STM32_PWR_CPUCR 0
+
+/*
+ * Clock tree static settings.
+ * Reading STM32 Reference Manual is required.
+ */
+#define STM32_HSI_ENABLED TRUE
+#define STM32_LSI_ENABLED TRUE
+#define STM32_CSI_ENABLED TRUE
+#define STM32_HSI48_ENABLED TRUE
+#define STM32_HSE_ENABLED TRUE
+#define STM32_LSE_ENABLED TRUE
+#define STM32_HSIDIV STM32_HSIDIV_DIV1
+
+/*
+ * PLLs static settings.
+ * Reading STM32 Reference Manual is required.
+ */
+#define STM32_PLLSRC STM32_PLLSRC_HSE_CK
+#define STM32_PLLCFGR_MASK ~0
+#define STM32_PLL1_ENABLED TRUE
+#define STM32_PLL1_P_ENABLED TRUE
+#define STM32_PLL1_Q_ENABLED TRUE
+#define STM32_PLL1_R_ENABLED TRUE
+#define STM32_PLL1_DIVM_VALUE 4
+#define STM32_PLL1_DIVN_VALUE 400
+#define STM32_PLL1_FRACN_VALUE 0
+#define STM32_PLL1_DIVP_VALUE 2
+#define STM32_PLL1_DIVQ_VALUE 8
+#define STM32_PLL1_DIVR_VALUE 8
+#define STM32_PLL2_ENABLED TRUE
+#define STM32_PLL2_P_ENABLED TRUE
+#define STM32_PLL2_Q_ENABLED TRUE
+#define STM32_PLL2_R_ENABLED TRUE
+#define STM32_PLL2_DIVM_VALUE 4
+#define STM32_PLL2_DIVN_VALUE 400
+#define STM32_PLL2_FRACN_VALUE 0
+#define STM32_PLL2_DIVP_VALUE 8
+#define STM32_PLL2_DIVQ_VALUE 8
+#define STM32_PLL2_DIVR_VALUE 8
+#define STM32_PLL3_ENABLED TRUE
+#define STM32_PLL3_P_ENABLED TRUE
+#define STM32_PLL3_Q_ENABLED TRUE
+#define STM32_PLL3_R_ENABLED TRUE
+#define STM32_PLL3_DIVM_VALUE 4
+#define STM32_PLL3_DIVN_VALUE 400
+#define STM32_PLL3_FRACN_VALUE 0
+#define STM32_PLL3_DIVP_VALUE 8
+#define STM32_PLL3_DIVQ_VALUE 8
+#define STM32_PLL3_DIVR_VALUE 8
+
+/*
+ * Core clocks dynamic settings (can be changed at runtime).
+ * Reading STM32 Reference Manual is required.
+ */
+#define STM32_SW STM32_SW_PLL1_P_CK
+#define STM32_RTCSEL STM32_RTCSEL_LSE_CK
+#define STM32_D1CPRE STM32_D1CPRE_DIV1
+#define STM32_D1HPRE STM32_D1HPRE_DIV4
+#define STM32_D1PPRE3 STM32_D1PPRE3_DIV1
+#define STM32_D2PPRE1 STM32_D2PPRE1_DIV1
+#define STM32_D2PPRE2 STM32_D2PPRE2_DIV1
+#define STM32_D3PPRE4 STM32_D3PPRE4_DIV1
+
+/*
+ * Peripherals clocks static settings.
+ * Reading STM32 Reference Manual is required.
+ */
+#define STM32_MCO1SEL STM32_MCO1SEL_HSI_CK
+#define STM32_MCO1PRE_VALUE 4
+#define STM32_MCO2SEL STM32_MCO2SEL_SYS_CK
+#define STM32_MCO2PRE_VALUE 4
+#define STM32_TIMPRE_ENABLE TRUE
+#define STM32_HRTIMSEL 0
+#define STM32_STOPKERWUCK 0
+#define STM32_STOPWUCK 0
+#define STM32_RTCPRE_VALUE 8
+#define STM32_CKPERSEL STM32_CKPERSEL_HSE_CK
+#define STM32_SDMMCSEL STM32_SDMMCSEL_PLL1_Q_CK
+#define STM32_QSPISEL STM32_QSPISEL_HCLK
+#define STM32_FMCSEL STM32_QSPISEL_HCLK
+#define STM32_SWPSEL STM32_SWPSEL_PCLK1
+#define STM32_FDCANSEL STM32_FDCANSEL_HSE_CK
+#define STM32_DFSDM1SEL STM32_DFSDM1SEL_PCLK2
+#define STM32_SPDIFSEL STM32_SPDIFSEL_PLL1_Q_CK
+#define STM32_SPI45SEL STM32_SPI45SEL_PCLK2
+#define STM32_SPI123SEL STM32_SPI123SEL_PLL1_Q_CK
+#define STM32_SAI23SEL STM32_SAI23SEL_PLL1_Q_CK
+#define STM32_SAI1SEL STM32_SAI1SEL_PLL1_Q_CK
+#define STM32_LPTIM1SEL STM32_LPTIM1SEL_PCLK1
+#define STM32_CECSEL STM32_CECSEL_LSE_CK
+#define STM32_USBSEL STM32_USBSEL_PLL1_Q_CK
+#define STM32_I2C123SEL STM32_I2C123SEL_PCLK1
+#define STM32_RNGSEL STM32_RNGSEL_HSI48_CK
+#define STM32_USART16SEL STM32_USART16SEL_PCLK2
+#define STM32_USART234578SEL STM32_USART234578SEL_PCLK1
+#define STM32_SPI6SEL STM32_SPI6SEL_PCLK4
+#define STM32_SAI4BSEL STM32_SAI4BSEL_PLL1_Q_CK
+#define STM32_SAI4ASEL STM32_SAI4ASEL_PLL1_Q_CK
+#define STM32_ADCSEL STM32_ADCSEL_PLL2_P_CK
+#define STM32_LPTIM345SEL STM32_LPTIM345SEL_PCLK4
+#define STM32_LPTIM2SEL STM32_LPTIM2SEL_PCLK4
+#define STM32_I2C4SEL STM32_I2C4SEL_PCLK4
+#define STM32_LPUART1SEL STM32_LPUART1SEL_PCLK4
+
+/*
+ * IRQ system settings.
+ */
+#define STM32_IRQ_EXTI0_PRIORITY 6
+#define STM32_IRQ_EXTI1_PRIORITY 6
+#define STM32_IRQ_EXTI2_PRIORITY 6
+#define STM32_IRQ_EXTI3_PRIORITY 6
+#define STM32_IRQ_EXTI4_PRIORITY 6
+#define STM32_IRQ_EXTI5_9_PRIORITY 6
+#define STM32_IRQ_EXTI10_15_PRIORITY 6
+#define STM32_IRQ_EXTI16_PRIORITY 6
+#define STM32_IRQ_EXTI17_PRIORITY 15
+#define STM32_IRQ_EXTI18_PRIORITY 6
+#define STM32_IRQ_EXTI19_PRIORITY 6
+#define STM32_IRQ_EXTI20_PRIORITY 6
+#define STM32_IRQ_EXTI21_PRIORITY 15
+#define STM32_IRQ_EXTI22_PRIORITY 15
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_DUAL_MODE FALSE
+#define STM32_ADC_COMPACT_SAMPLES FALSE
+#define STM32_ADC_USE_ADC12 FALSE
+#define STM32_ADC_USE_ADC3 FALSE
+#define STM32_ADC_ADC12_DMA_CHANNEL STM32_DMA_STREAM_ID_ANY
+#define STM32_ADC_ADC3_DMA_CHANNEL STM32_DMA_STREAM_ID_ANY
+#define STM32_ADC_ADC12_DMA_PRIORITY 2
+#define STM32_ADC_ADC3_DMA_PRIORITY 2
+#define STM32_ADC_ADC12_IRQ_PRIORITY 5
+#define STM32_ADC_ADC3_IRQ_PRIORITY 5
+#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV4
+#define STM32_ADC_ADC3_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV4
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1 FALSE
+#define STM32_CAN_USE_CAN2 FALSE
+#define STM32_CAN_USE_CAN3 FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY 11
+#define STM32_CAN_CAN2_IRQ_PRIORITY 11
+#define STM32_CAN_CAN3_IRQ_PRIORITY 11
+
+/*
+ * DAC driver system settings.
+ */
+#define STM32_DAC_DUAL_MODE FALSE
+#define STM32_DAC_USE_DAC1_CH1 TRUE
+#define STM32_DAC_USE_DAC1_CH2 TRUE
+#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10
+#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10
+#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2
+#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2
+#define STM32_DAC_DAC1_CH1_DMA_CHANNEL STM32_DMA_STREAM_ID_ANY
+#define STM32_DAC_DAC1_CH2_DMA_CHANNEL STM32_DMA_STREAM_ID_ANY
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1 FALSE
+#define STM32_GPT_USE_TIM2 FALSE
+#define STM32_GPT_USE_TIM3 FALSE
+#define STM32_GPT_USE_TIM4 FALSE
+#define STM32_GPT_USE_TIM5 FALSE
+#define STM32_GPT_USE_TIM6 TRUE
+#define STM32_GPT_USE_TIM7 FALSE
+#define STM32_GPT_USE_TIM8 FALSE
+#define STM32_GPT_USE_TIM9 FALSE
+#define STM32_GPT_USE_TIM11 FALSE
+#define STM32_GPT_USE_TIM12 FALSE
+#define STM32_GPT_USE_TIM14 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY 7
+#define STM32_GPT_TIM2_IRQ_PRIORITY 7
+#define STM32_GPT_TIM3_IRQ_PRIORITY 7
+#define STM32_GPT_TIM4_IRQ_PRIORITY 7
+#define STM32_GPT_TIM5_IRQ_PRIORITY 7
+#define STM32_GPT_TIM6_IRQ_PRIORITY 7
+#define STM32_GPT_TIM7_IRQ_PRIORITY 7
+#define STM32_GPT_TIM8_IRQ_PRIORITY 7
+#define STM32_GPT_TIM9_IRQ_PRIORITY 7
+#define STM32_GPT_TIM11_IRQ_PRIORITY 7
+#define STM32_GPT_TIM12_IRQ_PRIORITY 7
+#define STM32_GPT_TIM14_IRQ_PRIORITY 7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1 FALSE
+#define STM32_I2C_USE_I2C2 FALSE
+#define STM32_I2C_USE_I2C3 FALSE
+#define STM32_I2C_USE_I2C4 FALSE
+#define STM32_I2C_BUSY_TIMEOUT 50
+#define STM32_I2C_I2C1_RX_DMA_CHANNEL STM32_DMA_STREAM_ID_ANY
+#define STM32_I2C_I2C1_TX_DMA_CHANNEL STM32_DMA_STREAM_ID_ANY
+#define STM32_I2C_I2C2_RX_DMA_CHANNEL STM32_DMA_STREAM_ID_ANY
+#define STM32_I2C_I2C2_TX_DMA_CHANNEL STM32_DMA_STREAM_ID_ANY
+#define STM32_I2C_I2C3_RX_DMA_CHANNEL STM32_DMA_STREAM_ID_ANY
+#define STM32_I2C_I2C3_TX_DMA_CHANNEL STM32_DMA_STREAM_ID_ANY
+#define STM32_I2C_I2C4_RX_BDMA_CHANNEL STM32_BDMA_STREAM_ID_ANY
+#define STM32_I2C_I2C4_TX_BDMA_CHANNEL STM32_BDMA_STREAM_ID_ANY
+#define STM32_I2C_I2C1_IRQ_PRIORITY 5
+#define STM32_I2C_I2C2_IRQ_PRIORITY 5
+#define STM32_I2C_I2C3_IRQ_PRIORITY 5
+#define STM32_I2C_I2C4_IRQ_PRIORITY 5
+#define STM32_I2C_I2C1_DMA_PRIORITY 3
+#define STM32_I2C_I2C2_DMA_PRIORITY 3
+#define STM32_I2C_I2C3_DMA_PRIORITY 3
+#define STM32_I2C_I2C4_DMA_PRIORITY 3
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1 FALSE
+#define STM32_ICU_USE_TIM2 FALSE
+#define STM32_ICU_USE_TIM3 FALSE
+#define STM32_ICU_USE_TIM4 FALSE
+#define STM32_ICU_USE_TIM5 FALSE
+#define STM32_ICU_USE_TIM8 FALSE
+#define STM32_ICU_USE_TIM9 FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY 7
+#define STM32_ICU_TIM2_IRQ_PRIORITY 7
+#define STM32_ICU_TIM3_IRQ_PRIORITY 7
+#define STM32_ICU_TIM4_IRQ_PRIORITY 7
+#define STM32_ICU_TIM5_IRQ_PRIORITY 7
+#define STM32_ICU_TIM8_IRQ_PRIORITY 7
+#define STM32_ICU_TIM9_IRQ_PRIORITY 7
+
+/*
+ * MAC driver system settings.
+ */
+#define STM32_MAC_TRANSMIT_BUFFERS 2
+#define STM32_MAC_RECEIVE_BUFFERS 4
+#define STM32_MAC_BUFFERS_SIZE 1522
+#define STM32_MAC_PHY_TIMEOUT 100
+#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE
+#define STM32_MAC_ETH1_IRQ_PRIORITY 13
+#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED FALSE
+#define STM32_PWM_USE_TIM1 FALSE
+#define STM32_PWM_USE_TIM2 FALSE
+#define STM32_PWM_USE_TIM3 FALSE
+#define STM32_PWM_USE_TIM4 FALSE
+#define STM32_PWM_USE_TIM5 FALSE
+#define STM32_PWM_USE_TIM8 FALSE
+#define STM32_PWM_USE_TIM9 FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY 7
+#define STM32_PWM_TIM2_IRQ_PRIORITY 7
+#define STM32_PWM_TIM3_IRQ_PRIORITY 7
+#define STM32_PWM_TIM4_IRQ_PRIORITY 7
+#define STM32_PWM_TIM5_IRQ_PRIORITY 7
+#define STM32_PWM_TIM8_IRQ_PRIORITY 7
+#define STM32_PWM_TIM9_IRQ_PRIORITY 7
+
+/*
+ * RTC driver system settings.
+ */
+#define STM32_RTC_PRESA_VALUE 32
+#define STM32_RTC_PRESS_VALUE 1024
+#define STM32_RTC_CR_INIT 0
+#define STM32_RTC_TAMPCR_INIT 0
+
+/*
+ * SDC driver system settings.
+ */
+#define STM32_SDC_USE_SDMMC1 FALSE
+#define STM32_SDC_SDMMC_UNALIGNED_SUPPORT TRUE
+#define STM32_SDC_SDMMC_WRITE_TIMEOUT 1000
+#define STM32_SDC_SDMMC_READ_TIMEOUT 1000
+#define STM32_SDC_SDMMC_CLOCK_DELAY 10
+#define STM32_SDC_SDMMC1_DMA_CHANNEL STM32_DMA_STREAM_ID_ANY
+#define STM32_SDC_SDMMC1_DMA_PRIORITY 3
+#define STM32_SDC_SDMMC1_IRQ_PRIORITY 9
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1 FALSE
+#define STM32_SERIAL_USE_USART2 FALSE
+#define STM32_SERIAL_USE_USART3 TRUE
+#define STM32_SERIAL_USE_UART4 FALSE
+#define STM32_SERIAL_USE_UART5 FALSE
+#define STM32_SERIAL_USE_USART6 FALSE
+#define STM32_SERIAL_USE_UART7 FALSE
+#define STM32_SERIAL_USE_UART8 FALSE
+#define STM32_SERIAL_USART1_PRIORITY 12
+#define STM32_SERIAL_USART2_PRIORITY 12
+#define STM32_SERIAL_USART3_PRIORITY 12
+#define STM32_SERIAL_UART4_PRIORITY 12
+#define STM32_SERIAL_UART5_PRIORITY 12
+#define STM32_SERIAL_USART6_PRIORITY 12
+#define STM32_SERIAL_UART7_PRIORITY 12
+#define STM32_SERIAL_UART8_PRIORITY 12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1 FALSE
+#define STM32_SPI_USE_SPI2 FALSE
+#define STM32_SPI_USE_SPI3 FALSE
+#define STM32_SPI_USE_SPI4 FALSE
+#define STM32_SPI_USE_SPI5 FALSE
+#define STM32_SPI_USE_SPI6 FALSE
+#define STM32_SPI_SPI1_RX_DMA_CHANNEL STM32_DMA_STREAM_ID_ANY
+#define STM32_SPI_SPI1_TX_DMA_CHANNEL STM32_DMA_STREAM_ID_ANY
+#define STM32_SPI_SPI2_RX_DMA_CHANNEL STM32_DMA_STREAM_ID_ANY
+#define STM32_SPI_SPI2_TX_DMA_CHANNEL STM32_DMA_STREAM_ID_ANY
+#define STM32_SPI_SPI3_RX_DMA_CHANNEL STM32_DMA_STREAM_ID_ANY
+#define STM32_SPI_SPI3_TX_DMA_CHANNEL STM32_DMA_STREAM_ID_ANY
+#define STM32_SPI_SPI4_RX_DMA_CHANNEL STM32_DMA_STREAM_ID_ANY
+#define STM32_SPI_SPI4_TX_DMA_CHANNEL STM32_DMA_STREAM_ID_ANY
+#define STM32_SPI_SPI5_RX_DMA_CHANNEL STM32_DMA_STREAM_ID_ANY
+#define STM32_SPI_SPI5_TX_DMA_CHANNEL STM32_DMA_STREAM_ID_ANY
+#define STM32_SPI_SPI6_RX_BDMA_CHANNEL STM32_BDMA_STREAM_ID_ANY
+#define STM32_SPI_SPI6_TX_BDMA_CHANNEL STM32_BDMA_STREAM_ID_ANY
+#define STM32_SPI_SPI1_DMA_PRIORITY 1
+#define STM32_SPI_SPI2_DMA_PRIORITY 1
+#define STM32_SPI_SPI3_DMA_PRIORITY 1
+#define STM32_SPI_SPI4_DMA_PRIORITY 1
+#define STM32_SPI_SPI5_DMA_PRIORITY 1
+#define STM32_SPI_SPI6_DMA_PRIORITY 1
+#define STM32_SPI_SPI1_IRQ_PRIORITY 10
+#define STM32_SPI_SPI2_IRQ_PRIORITY 10
+#define STM32_SPI_SPI3_IRQ_PRIORITY 10
+#define STM32_SPI_SPI4_IRQ_PRIORITY 10
+#define STM32_SPI_SPI5_IRQ_PRIORITY 10
+#define STM32_SPI_SPI6_IRQ_PRIORITY 10
+#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY 8
+#define STM32_ST_USE_TIMER 2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1 FALSE
+#define STM32_UART_USE_USART2 FALSE
+#define STM32_UART_USE_USART3 FALSE
+#define STM32_UART_USE_UART4 FALSE
+#define STM32_UART_USE_UART5 FALSE
+#define STM32_UART_USE_USART6 FALSE
+#define STM32_UART_USE_UART7 FALSE
+#define STM32_UART_USE_UART8 FALSE
+#define STM32_UART_USART1_RX_DMA_CHANNEL STM32_DMA_STREAM_ID_ANY
+#define STM32_UART_USART1_TX_DMA_CHANNEL STM32_DMA_STREAM_ID_ANY
+#define STM32_UART_USART2_RX_DMA_CHANNEL STM32_DMA_STREAM_ID_ANY
+#define STM32_UART_USART2_TX_DMA_CHANNEL STM32_DMA_STREAM_ID_ANY
+#define STM32_UART_USART3_RX_DMA_CHANNEL STM32_DMA_STREAM_ID_ANY
+#define STM32_UART_USART3_TX_DMA_CHANNEL STM32_DMA_STREAM_ID_ANY
+#define STM32_UART_UART4_RX_DMA_CHANNEL STM32_DMA_STREAM_ID_ANY
+#define STM32_UART_UART4_TX_DMA_CHANNEL STM32_DMA_STREAM_ID_ANY
+#define STM32_UART_UART5_RX_DMA_CHANNEL STM32_DMA_STREAM_ID_ANY
+#define STM32_UART_UART5_TX_DMA_CHANNEL STM32_DMA_STREAM_ID_ANY
+#define STM32_UART_USART6_RX_DMA_CHANNEL STM32_DMA_STREAM_ID_ANY
+#define STM32_UART_USART6_TX_DMA_CHANNEL STM32_DMA_STREAM_ID_ANY
+#define STM32_UART_UART7_RX_DMA_CHANNEL STM32_DMA_STREAM_ID_ANY
+#define STM32_UART_UART7_TX_DMA_CHANNEL STM32_DMA_STREAM_ID_ANY
+#define STM32_UART_UART8_RX_DMA_CHANNEL STM32_DMA_STREAM_ID_ANY
+#define STM32_UART_UART8_TX_DMA_CHANNEL STM32_DMA_STREAM_ID_ANY
+#define STM32_UART_USART1_IRQ_PRIORITY 12
+#define STM32_UART_USART2_IRQ_PRIORITY 12
+#define STM32_UART_USART3_IRQ_PRIORITY 12
+#define STM32_UART_UART4_IRQ_PRIORITY 12
+#define STM32_UART_UART5_IRQ_PRIORITY 12
+#define STM32_UART_USART6_IRQ_PRIORITY 12
+#define STM32_UART_USART1_DMA_PRIORITY 0
+#define STM32_UART_USART2_DMA_PRIORITY 0
+#define STM32_UART_USART3_DMA_PRIORITY 0
+#define STM32_UART_UART4_DMA_PRIORITY 0
+#define STM32_UART_UART5_DMA_PRIORITY 0
+#define STM32_UART_USART6_DMA_PRIORITY 0
+#define STM32_UART_UART7_DMA_PRIORITY 0
+#define STM32_UART_UART8_DMA_PRIORITY 0
+#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_OTG1 FALSE
+#define STM32_USB_USE_OTG2 FALSE
+#define STM32_USB_OTG1_IRQ_PRIORITY 14
+#define STM32_USB_OTG2_IRQ_PRIORITY 14
+#define STM32_USB_OTG1_RX_FIFO_SIZE 512
+#define STM32_USB_OTG2_RX_FIFO_SIZE 1024
+#define STM32_USB_HOST_WAKEUP_DURATION 2
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG FALSE
+
+#endif /* MCUCONF_H */
diff --git a/testhal/STM32/multi/DAC/cfg/stm32h743_nucleo144/portab.c b/testhal/STM32/multi/DAC/cfg/stm32h743_nucleo144/portab.c
new file mode 100644
index 000000000..3c9c59911
--- /dev/null
+++ b/testhal/STM32/multi/DAC/cfg/stm32h743_nucleo144/portab.c
@@ -0,0 +1,60 @@
+/*
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file portab.c
+ * @brief Application portability module code.
+ *
+ * @addtogroup application_portability
+ * @{
+ */
+
+#include "hal.h"
+
+#include "portab.h"
+
+/*===========================================================================*/
+/* Module local definitions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Module exported variables. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Module local types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Module local variables. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Module local functions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Module exported functions. */
+/*===========================================================================*/
+
+void portab_setup(void) {
+
+ /* Setting up the output pin as analog as suggested
+ by the Reference Manual.*/
+ palSetPadMode(GPIOA, 4, PAL_MODE_INPUT_ANALOG);
+}
+
+/** @} */
diff --git a/testhal/STM32/multi/DAC/cfg/stm32h743_nucleo144/portab.h b/testhal/STM32/multi/DAC/cfg/stm32h743_nucleo144/portab.h
new file mode 100644
index 000000000..6bb41a24e
--- /dev/null
+++ b/testhal/STM32/multi/DAC/cfg/stm32h743_nucleo144/portab.h
@@ -0,0 +1,77 @@
+/*
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file portab.h
+ * @brief Application portability macros and structures.
+ *
+ * @addtogroup application_portability
+ * @{
+ */
+
+#ifndef PORTAB_H
+#define PORTAB_H
+
+/*===========================================================================*/
+/* Module constants. */
+/*===========================================================================*/
+
+#define PORTAB_LINE_LED1 LINE_LED1
+#define PORTAB_LINE_LED2 LINE_LED2
+#define PORTAB_LED_OFF PAL_LOW
+#define PORTAB_LED_ON PAL_HIGH
+#define PORTAB_LINE_BUTTON LINE_BUTTON
+#define PORTAB_BUTTON_PRESSED PAL_HIGH
+
+#define PORTAB_SD1 SD2
+
+#define PORTAB_DAC_TRIG 5
+
+/*===========================================================================*/
+/* Module pre-compile time settings. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Module data structures and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Module macros. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void portab_setup(void);
+#ifdef __cplusplus
+}
+#endif
+
+/*===========================================================================*/
+/* Module inline functions. */
+/*===========================================================================*/
+
+#endif /* PORTAB_H */
+
+/** @} */
diff --git a/testhal/STM32/multi/DAC/debug/STM32-DAC (Select ELF file)(OpenOCD, Flash and Run).launch b/testhal/STM32/multi/DAC/debug/STM32-DAC (Select ELF file)(OpenOCD, Flash and Run).launch
index f7710c50c..df26a7e73 100644
--- a/testhal/STM32/multi/DAC/debug/STM32-DAC (Select ELF file)(OpenOCD, Flash and Run).launch
+++ b/testhal/STM32/multi/DAC/debug/STM32-DAC (Select ELF file)(OpenOCD, Flash and Run).launch
@@ -33,7 +33,7 @@
<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
-<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList&gt;&lt;content id=&quot;rand[31]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[30]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[29]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[28]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[27]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[26]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[25]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[24]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[23]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[22]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[21]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[20]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[19]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[18]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[17]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[16]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[15]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[14]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[13]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[12]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[11]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[10]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[9]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[8]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[7]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[6]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[5]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[4]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[3]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[2]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[1]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[0]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;xPSR-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;mfs_buffer[447]-null-mfs_test_001_005_execute-(format)&quot; val=&quot;0&quot;/&gt;&lt;content id=&quot;mfs_buffer[507]-null-mfs_test_001_005_execute-(format)&quot; val=&quot;0&quot;/&gt;&lt;content id=&quot;rp[506]-rp-mfs_flash_read-(format)&quot; val=&quot;0&quot;/&gt;&lt;content id=&quot;rp[507]-rp-mfs_flash_read-(format)&quot; val=&quot;0&quot;/&gt;&lt;content id=&quot;rp-mfs_flash_read-(cast_to_array)&quot; val=&quot;0:511&quot;/&gt;&lt;content id=&quot;rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;/contentList&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList&gt;&lt;content id=&quot;rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rp-mfs_flash_read-(cast_to_array)&quot; val=&quot;0:511&quot;/&gt;&lt;content id=&quot;rp[507]-rp-mfs_flash_read-(format)&quot; val=&quot;0&quot;/&gt;&lt;content id=&quot;rp[506]-rp-mfs_flash_read-(format)&quot; val=&quot;0&quot;/&gt;&lt;content id=&quot;mfs_buffer[507]-null-mfs_test_001_005_execute-(format)&quot; val=&quot;0&quot;/&gt;&lt;content id=&quot;mfs_buffer[447]-null-mfs_test_001_005_execute-(format)&quot; val=&quot;0&quot;/&gt;&lt;content id=&quot;xPSR-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[0]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[1]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[2]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[3]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[4]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[5]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[6]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[7]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[8]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[9]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[10]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[11]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[12]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[13]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[14]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[15]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[16]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[17]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[18]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[19]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[20]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[21]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[22]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[23]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[24]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[25]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[26]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[27]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[28]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[29]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[30]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;rand[31]-rand-main-(format)&quot; val=&quot;4&quot;/&gt;&lt;/contentList&gt;"/>
<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#10;&lt;globalVariableList/&gt;&#10;"/>
<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#10;&lt;memoryBlockExpressionList&gt;&#10;&lt;memoryBlockExpressionItem&gt;&#10;&lt;expression text=&quot;0x20000c34&quot;/&gt;&#10;&lt;/memoryBlockExpressionItem&gt;&#10;&lt;/memoryBlockExpressionList&gt;&#10;"/>
<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="${selected_resource_loc}"/>
diff --git a/testhal/STM32/multi/DAC/make/stm32h743_nucleo144.make b/testhal/STM32/multi/DAC/make/stm32h743_nucleo144.make
new file mode 100644
index 000000000..33776ba7a
--- /dev/null
+++ b/testhal/STM32/multi/DAC/make/stm32h743_nucleo144.make
@@ -0,0 +1,226 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+ USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+ USE_COPT =
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+ USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+ USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+ USE_LDOPT =
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+ USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+ USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+ USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+ USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+ USE_PROCESS_STACKSIZE = 0x400
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+ USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+# Enables the use of FPU (no, softfp, hard).
+ifeq ($(USE_FPU),)
+ USE_FPU = no
+endif
+
+# FPU-related options.
+ifeq ($(USE_FPU_OPT),)
+ USE_FPU_OPT = -mfloat-abi=$(USE_FPU) -mfpu=fpv5-sp-d16 -fsingle-precision-constant
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS := ../../../..
+CONFDIR := ./cfg/stm32h743_nucleo144
+BUILDDIR := ./build/stm32h743_nucleo144
+DEPDIR := ./.dep/stm32h743_nucleo144
+
+# Licensing files.
+include $(CHIBIOS)/os/license/license.mk
+# Startup files.
+include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32h7xx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/STM32/STM32H7xx/platform.mk
+include $(CHIBIOS)/os/hal/boards/ST_NUCLEO144_H743ZI/board.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
+# Auto-build files in ./source recursively.
+include $(CHIBIOS)/tools/mk/autobuild.mk
+# Other files (optional).
+#include $(CHIBIOS)/test/lib/test.mk
+#include $(CHIBIOS)/test/rt/rt_test.mk
+#include $(CHIBIOS)/test/oslib/oslib_test.mk
+#include $(CHIBIOS)/os/hal/lib/streams/streams.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/STM32H743xI.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(ALLCSRC) \
+ $(TESTSRC) \
+ $(CONFDIR)/portab.c \
+ main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC = $(ALLCPPSRC)
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+# option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+# option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+# option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+# option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(ALLASMSRC)
+ASMXSRC = $(ALLXASMSRC)
+
+INCDIR = $(ALLINC) $(TESTINC) $(CONFDIR)
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user section
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU = cortex-m7
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+# runtime support makes code size explode.
+LD = $(TRGT)gcc
+#LD = $(TRGT)g++
+CP = $(TRGT)objcopy
+AS = $(TRGT)gcc -x assembler-with-cpp
+AR = $(TRGT)ar
+OD = $(TRGT)objdump
+SZ = $(TRGT)size
+HEX = $(CP) -O ihex
+BIN = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk
+include $(RULESPATH)/rules.mk
diff --git a/testhal/STM32/multi/DAC/make/stm32l476_discovery.make b/testhal/STM32/multi/DAC/make/stm32l476_discovery.make
index 21875522e..816fe9f90 100644
--- a/testhal/STM32/multi/DAC/make/stm32l476_discovery.make
+++ b/testhal/STM32/multi/DAC/make/stm32l476_discovery.make
@@ -109,10 +109,10 @@ include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
# Auto-build files in ./source recursively.
include $(CHIBIOS)/tools/mk/autobuild.mk
# Other files (optional).
-include $(CHIBIOS)/test/lib/test.mk
-include $(CHIBIOS)/test/rt/rt_test.mk
-include $(CHIBIOS)/test/oslib/oslib_test.mk
-include $(CHIBIOS)/os/hal/lib/streams/streams.mk
+#include $(CHIBIOS)/test/lib/test.mk
+#include $(CHIBIOS)/test/rt/rt_test.mk
+#include $(CHIBIOS)/test/oslib/oslib_test.mk
+#include $(CHIBIOS)/os/hal/lib/streams/streams.mk
# Define linker script file here.
LDSCRIPT= $(STARTUPLD)/STM32L476xG.ld
diff --git a/testhal/STM32/multi/DAC/make/stm32l4r5zi_nucleo144.make b/testhal/STM32/multi/DAC/make/stm32l4r5zi_nucleo144.make
index aa33126be..f7389e770 100644
--- a/testhal/STM32/multi/DAC/make/stm32l4r5zi_nucleo144.make
+++ b/testhal/STM32/multi/DAC/make/stm32l4r5zi_nucleo144.make
@@ -109,10 +109,10 @@ include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
# Auto-build files in ./source recursively.
include $(CHIBIOS)/tools/mk/autobuild.mk
# Other files (optional).
-include $(CHIBIOS)/test/lib/test.mk
-include $(CHIBIOS)/test/rt/rt_test.mk
-include $(CHIBIOS)/test/oslib/oslib_test.mk
-include $(CHIBIOS)/os/hal/lib/streams/streams.mk
+#include $(CHIBIOS)/test/lib/test.mk
+#include $(CHIBIOS)/test/rt/rt_test.mk
+#include $(CHIBIOS)/test/oslib/oslib_test.mk
+#include $(CHIBIOS)/os/hal/lib/streams/streams.mk
# Define linker script file here.
LDSCRIPT= $(STARTUPLD)/STM32L4R5xI.ld